Aulitzky Tuning: Vehicle styling

Air inlets Double-Ducts Carbon | fits BMW M3/M4 (G80/G81/G82/G83) | Aulitzky Tuning

The carbon replacement air intakes Twin Fin for the G8x were developed to match the channel lines of the SP1 G8X front splitter. With both the SP1 and Twin Fin ducts installed, you get the aggressive angles your front end needs.Our covers are a direct replacement, which means you can finally remove the honeycomb grille that is currently in front of the air ducts.These covers are made of pure pre-preg carbon, so the bumper adds minimal weight while providing the aggressive look you've been wanting. Details:- 100% pure pre-preg carbon fiber construction- OEM style fabric- High gloss finish- Fit guarantee- Mounts to the OEM front bumper using the original grille clip positions- with parts certificate according to §19.3 Compatible vehicles:- BMW G80 M3/Competition/CS Sedan (2021+)- BMW G81 M3 Competition Touring (2021+)- BMW G82 M4/Competition/CSL Coupe (2021+)- BMW G83 M4 Competition Convertible (2021+)Note: This is NOT an original BMW product!

€1,349.00*

Air inlets Performance Carbon | fits BMW M3/M4 (G80/G81/G82/G83) | Aulitzky Tuning

The Carbon Performance Twin Fin air intakes for the G8x were developed to give the vehicle a distinctive look. These covers are made of pure pre-preg carbon, so the bumper adds minimal weight while providing the aggressive look you've been wanting. Details:- 100% pure pre-preg carbon fiber construction- OEM style fabric- High gloss finish- Fit guarantee- with parts certificate according to §19.3 Compatible vehicles:- BMW G80 M3/Competition/CS Sedan (2021+)- BMW G81 M3 Competition Touring (2021+)- BMW G82 M4/Competition/CSL Coupe (2021+)- BMW G83 M4 Competition Convertible (2021+)Note: This is NOT an original BMW product!

€839.00*

Air intake set Carbon | fits BMW M3/M4 incl. Competition/CS/CSL (G80/G81/G82/G83) | Aulitzky Tuning

The Air Intake Set for the G8X models made of carbon fibre gives your vehicle an upscale look. When you buy Pre-Preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run. Scope of delivery:- 1x Air Intake Set Details:- 100% carbon fibre construction- High gloss finish- Fit guarantee Compatible vehicles with S58 engine:- BMW G80 M3 (all models)- BMW G81 M3 (all models)- BMW G82 M4 (all models)- BMW G83 M4 (all models) Note: This is NOT an original BMW product!

€989.00*

Air intakes Carbon | fits BMW M2 (G87) S58 | Aulitzky Tuning

The high-quality Pre-Preg carbon fibre air intakes are an excellent addition to significantly enhance the style of your vehicle. Unlike regular carbon fibre, Pre-Preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- with parts certificate according to §19.3 Scope of delivery:- 1x pair of air intakes incl. mounting material Compatible vehicles:BMW G87 2 Series M2 Note: This is NOT an original BMW product!

€699.00*

Air intakes Carbon | fits BMW X5M/X6M Competition LCI (F95/F96) S68 | Aulitzky Tuning

Pre-preg carbon fibre air intakes are an excellent addition to significantly enhance the style of your vehicle. Unlike regular carbon fibre, Pre-Preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x pair of air intakes Compatible vehicles:BMW X5 (F95) FaceliftBMW X6 (F96) Facelift Note: This is NOT an original BMW product!

€799.00*

Air intakes SOOQOO Carbon | fits BMW M2 inkl. Competition/CS (F87) N55/S55 | Aulitzky Tuning

Experience the fascinating world of carbon air intakes customised for the F87. These have been developed to give your vehicle a unique appearance.Unlike normal carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee - with parts certificate according to §19.3 Scope of delivery:- 1x SOOQOO air intakes Compatible vehicles:BMW M2 (F87)BMW M2 Competition (F87) Note: This is NOT an original BMW product!

€289.00*

Air intakes SOOQOO Carbon | fits BMW X3M/X4M incl. Competition (F97/F98) LCI S58 | Aulitzky Tuning

Experience the fascinating world of carbon air intakes customised for the F97 and F98. These have been developed to give your vehicle a unique appearance.Unlike normal carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x SOOQOO air intakes Compatible vehicles:BMW X3M/ Competition (F97) FaceliftBMW X4M/ Competition (F98) Facelift Note: This is NOT an original BMW product!

€579.00*

Air intakes SOOQOO Carbon | fits BMW X5M/X6M Competition LCI (F95/F96) S68 | Aulitzky Tuning

The high-quality Pre-Preg carbon fibre air intakes are an excellent addition to significantly enhance the style of your vehicle. Unlike regular carbon fibre, Pre-Preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x pair of SOOQOO air intakes Compatible vehicles:BMW X5 (F95) FaceliftBMW X6 (F96) Facelift Note: This is NOT an original BMW product!

€799.00*

Armrest Alcantara / Leather | fits BMW M2/M3/M4 (G80/G81/G82/G83/G87) | Aulitzky Tuning

Add a touch of luxury to the interior of your G8X with this custom-made center armrest in high-quality leather or Alcantara. The red contrast stitching creates a sporty look inspired by motorsport. Fully compatible with the Karbonius center console and easy to install without any modifications. Features: - Available in high-quality leather or Alcantara - Red motorsport-style stitching - Quick installation – no modifications required - Exclusive design for a personalized interior Scope of delivery: - 1x center armrest Compatible vehicles: - BMW G87 M2 - BMW G80 M3 - BMW G81 M3 - BMW G82 M4 - BMW G83 M4 Note: This is NOT an original BMW product!

€250.00*

Details

Bonnet air intakes Carbon | fits BMW M3 incl. CRT/GTS (E90/E92/E93) S65 | AutoTecknic

AutoTecknic carbon bonnet air intakes for E9X models Compatible vehicles:BMW 3 (E90) M3 2007-2011BMW 3 (E90) M3 CRT 2011-2011BMW 3 Convertible (E93) M3 2008-2013BMW 3 Coupe (E92) M3 2007-2013BMW 3 Coupe (E92) M3 GTS 2007-2013

€274.00*

Canards Carbon | fits BMW M2 (G87) S58 | Aulitzky Tuning

The high-quality carbon fibre rear canards are a perfect addition to significantly enhance the style of your vehicle. Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x carbon rear canards Compatible vehicles:BMW G87 2 Series M2 Note: This is NOT an original BMW product!

€589.00*

Canards Carbon | fits BMW M2 (G87) S58 | Aulitzky Tuning

The high-quality Canards made from Pre-Preg carbon fibre are an excellent addition to significantly enhance the style of your vehicle. Unlike regular carbon fibre, Pre-Preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x pair of Canards Compatible vehicles:BMW G87 2 Series M2 Note: This is NOT an original BMW product!

€529.00*

Canards Carbon | fits BMW M2 Competition/CS (F87) S55 | 3DDesign

Elegantly sporty - 3DDesign combines a perfect fit with uncompromising part quality. The best M2C set the market has ever seen. Compatible vehicles:BMW 2 Coupe (F22, F87) M2 CS 2019-2021BMW 2 Coupe (F22, F87) M2 Competition 2018-2021

€755.00*

Canards Carbon | fits BMW M3 incl. CRT/GTS (E90/E92/E93) S65 | AutoTecknic

AutoTecknic carbon front bumper canards are the complete solution for aerodynamically tuning the driving behaviour of the front of the vehicle while maintaining its aesthetics. Made from lightweight and durable carbon fibre composites, the canards help to increase the downforce of the front end at high speeds. The additional downforce stabilises the vehicle in sharp corners and increases traction for faster lap times. The properties of the carbon also give the E90, E92 and E93 a more aggressive styling. Note: No drilling is required for installation. Compatible vehicles:BMW 3 (E90) M3 2007-2011BMW 3 (E90) M3 CRT 2011-2011BMW 3 Convertible (E93) M3 2008-2013BMW 3 Coupe (E92) M3 2007-2013BMW 3 Coupe (E92) M3 GTS 2007-2013

€205.00*

Canards Carbon | fits BMW M3/M4 incl. Competition/CS/GTS (F80/F82/F83) S55 | AutoTecknic

AutoTecknic carbon fibre front bumper canards are the complete solution to aerodynamically optimise the handling of the front of a car. Made from lightweight and durable carbon graphite composites, AutoTecknic carbon fibre front bumper canards help to increase front downforce at high speeds. The additional downforce stabilises the car's chassis during hard cornering and increases traction for faster lap times. The optical properties of the carbon also give the F80, F82, F83 a more aggressive design. Compatible vehicles:BMW 3 (F30, F80) M3 2014-2018BMW 3 (F30, F80) M3 CS 2018-2018BMW 3 (F30, F80) M3 Competition 2016-2018BMW 4 Convertible (F33, F83) M4 2014-2020BMW 4 Convertible (F33, F83) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 2014-2020BMW 4 Coupe (F32, F82) M4 CS 2017-2019BMW 4 Coupe (F32, F82) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 GTS 2016-2019

€185.00*

Canards Performance Carbon | fits BMW M3/M4 (G80/G81/G82/G83) S58 | Aulitzky Tuning

The high-quality carbon fibre front canards are a perfect addition to significantly enhance the style of your vehicle. Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- With parts certificate according to §19.3 Scope of delivery:- 1x Performance carbon canards Compatible vehicles: BMW G80 M3 Limousine (2021+) BMW G80 M3 Competition Limousine (2021+) BMW G81 M3 Touring (2023+) BMW G81 M3 Competition Touring (2023+) BMW G82 M4 Coupe (2021+) BMW G82 M4 Competition Coupé (2021+) BMW G83 M4 Cabrio (2021+) BMW G83 M4 Competition Cabrio (2021+) Note: This is NOT an original BMW product!

€349.00*

Canards Performance Carbon | fits BMW M3/M4 (G80/G81/G82/G83) S58 | Aulitzky Tuning

The high-quality carbon fibre front canards are a perfect addition to significantly enhance the style of your vehicle. Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- With parts certificate according to §19.3 Scope of delivery:- 1x set carbon front canards Compatible vehicles: BMW G80 M3 Limousine (2021+) BMW G80 M3 Competition Limousine (2021+) BMW G81 M3 Touring (2023+) BMW G81 M3 Competition Touring (2023+) BMW G82 M4 Coupe (2021+) BMW G82 M4 Competition Coupé (2021+) BMW G83 M4 Cabrio (2021+) BMW G83 M4 Competition Cabrio (2021+) Note: This is NOT an original BMW product!

€499.00*

Canards SOOQOO Carbon | fits BMW M5 (G90/G99) S68 | Aulitzky Tuning

The SOOQOO front canards made of pre-preg Carbon fiber give your vehicle a distinctly sporty aggressivenessDetails:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x front spoiler in prepreg carbon fibre Compatible vehicles:BMW M5 G90BMW M5 G99 TouringNote: This is NOT an original BMW product!

€499.00*

Canards SOOQOO Carbon | fits BMW X3M incl. Competition (F97) S58 | Aulitzky Tuning

Experience the world of carbon rear canards customised for the F97. These have been developed to give your vehicle a unique look.Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x set of SOOQOO canards Compatible vehicles:BMW X3M/ Competition (F97) Facelift Note: This is NOT an original BMW product!

€319.00*

Canards SOOQOO Carbon | fits BMW X3M/X4M incl. Competition (F97/F98) LCI S58 | Aulitzky Tuning

Experience the fascinating world of carbon front canards customised for the F97/F98. These have been developed to give your vehicle a unique appearance.Unlike normal carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x set of SOOQOO front canards Compatible vehicles:BMW X3M/ Competition (F97) FaceliftBMW X4M/ Competition (F98) Facelift Note: This is NOT an original BMW product!

€619.00*

Carbon side diffusers | fits BMW M3 incl. Competition (G80/G81) | Aulitzky Tuning

Made from state-of-the-art pre-preg carbon fibre, these side diffusers for the rear emphasise the character of your vehicle and make it stand out both on the road and online. Why do we use pre-preg carbon fibre?Unlike normal carbon fibre, pre-preg carbon is reinforced to increase strength and durability.It can also be a staggering 70% lighter than other carbon fibre options, ideal for weight saving.In terms of quality, pre-preg carbon is far more consistent, meaning that the likelihood of imperfections is drastically reduced.of imperfections is drastically reduced.The manufacturing process eliminates unwanted air bubbles and results in a perfect, smooth, sleekand high-gloss finish that is the ultimate piece to complement your vehicle. When you buy Pre-Preg, you are investing in a higher quality, more durable part that will outlast other forms ofoutlast other forms of carbon fibre and potentially save you money in the long run. Details:- 100% pure prepreg carbon fibre construction- OEM style weave- High-gloss finish- with parts certificate according to §19.3 Scope of delivery:1x set of side diffusers Compatible vehicles:- BMW G80 M3 Sedan (2021+)- BMW G80 M3 Competition Sedan (2021+)- BMW G81 M3 Competition Touring (2021+)Note: This is NOT an original BMW product!

€499.00*

Centre console side cover carbon | fits BMW M2/M3/M4 incl. Competition (G80/G81/G82/G83/G87) | Aulitzky Tuning

The side centre consoles give your vehicle an upscale look and feel. When you buy Pre-Preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run. Details:- 100% carbon fibre construction- High gloss finish- Fit guarantee- registration free Scope of delivery:1x set of centre console side covers (1x right / 1x left) Compatible vehicles:- BMW G87 M2 - BMW G80 M3 incl. Competition Saloon (2021+)- BMW G81 M3 incl. Competition Touring (2023+)- BMW G82 M4 incl. Competition Coupé (2021+)- BMW G83 M4 incl. Competition Convertible (2021+) Note: This is NOT an original BMW product!

€199.00*

Clubsport bar double-X with Isofix | fits BMW M3 (G80) | Bavarian Car Tuning | Used SPECIAL PRICE

The used "Clubsport bar V3" from Bavarian Car Tuning is a high-quality roll bar that was specially developed for the G80/G82. The bar is made of robust and lightweight material that guarantees high strength and rigidity. It is painted in red and blends seamlessly into the interior of your vehicle. The Clubsport bar V3 is easy to install, fits the dimensions of the G80 perfectly and includes an Isofix mount. The rear seat does not need to be removed. The bar can be installed and removed within 10 minutes.With expert opinion Please note that this is a used item, so there may be slight signs of use (see pictures). Nevertheless, it offers a great opportunity to give your vehicle a sporty touch and increase safety at the same time. SPECIAL PRICE - USED (TOP CONDITION)

€650.00* €1,100.00* (40.91% saved)

Clubsport front spoiler and brake ducts Carbon | fits BMW M3 (E90/E92/E93) S65 | RKP

This high quality front lip will make your vehicle stand out in all the right ways. Get the best of the best with the RKP E9X Clubsport ‘Shorty Style’ carbon fiber front lip. The front lip is made entirely of carbon fiber, making it as tough as it is stunning. It is handcrafted in Germany and has proven itself on the race track as it generates significant downforce. Don't worry about strength, as it is secured with M5 bolts. Compatible vehicles:BMW 3 Convertible (E93) M3 2008-2013BMW 3 Coupe (E92) M3 2007-2013BMW 3 (E90) M3 2007-2013 The article has the following certificate: Material certificate

€4,621.00*

Diffuser Dry Carbon | fits BMW M2 incl. Competition (F87) N55 S55 | AutoTecknic

Autotecknic dry carbon fibre diffuser for 2 Series F87 incl. Competition Compatible vehicles:BMW 2 Coupe (F22, F87) M2 2015-2018BMW 2 Coupe (F22, F87) M2 Competition 2018-2021

€899.00*

Diffusor Carbon (2 fins) | fits BMW M135i/M140i LCI (F20) | 3DDesign

Finally here - the 3DDesign carbon diffuser for the F20 facelift (LCI) with M package (M135i, M140i). The high-quality design line from 3DDesign also runs through the new F20 components. Discreet yet individual and unique. All parts are of course made of the best quality materials and workmanship. Perfect fit meets high-end design. The exciting 2-fin design ensures increased contact pressure and a real eye-catcher. Compatible vehicles:BMW 1 (F20) M 135 i 2015-2016BMW 1 (F20) M 135 i xDrive 2015-2016BMW 1 (F20) M 140 i 2016-2019BMW 1 (F20) M 140 i xDrive 2016-2019

€1,510.00*

Diffusor Carbon | fits BMW i8 (I12/I15) B38 | 3DDesign

The carbon diffuser for the i8 leaves nothing to be desired. The great design line from 3DDesign also runs through here naturally. Thanks to the innovative technical design, the diffuser increases the downforce for the i8. As part of a body kit for the i8, the diffuser also contributes to an individual and very hot look. Compatible vehicles:BMW i8 (I12) hybrid 2014-2018BMW i8 (I12) hybrid 2018-2020BMW i8 Roadster (I15) hybrid 2018-2020

€3,920.00*

Diffusor Carbon | fits BMW M2 incl. Competition/CS (F87) N55 S55 | 3DDesign

The 3DDesign carbon diffuser for the F87 is made of carbon fiber/carbon fiber and gives the rear of the vehicle a new shine in no time at all. Installation is extremely simple - but the effect is all the greater. The calm design of the diffuser emphasizes the elegance of the otherwise sporty vehicle. Incl. parts certificate Compatible vehicles:BMW 2 Coupe (F22, F87) M2 2015-2018BMW 2 Coupe (F22, F87) M2 CS 2019-2021BMW 2 Coupe (F22, F87) M2 Competition 2018-2021

€1,970.00*

Diffusor Carbon | fits BMW M3 incl. CRT (E90) S65 | 3DDesign

The 3DDesign carbon diffuser for the E90 is made entirely of carbon fibre and therefore easily meets all lightweight construction requirements. In addition, the downforce on the rear axle is increased, the aerodynamics improved and the sportiness of the vehicle emphasised. Compatible vehicles:BMW 3 (E90) M3 2007-2011BMW 3 (E90) M3 CRT 2011-2011

€1,730.00*

Diffusor Carbon | fits BMW M3 incl. GTS (E92) S65 | 3DDesign

The 3DDesign carbon diffuser for the E92 is made entirely of carbon fibre and provides even more sportiness at the rear of the E92. It also increases the downforce on the rear axle, which further improves the aerodynamics of the entire vehicle. Compatible vehicles:BMW 3 Coupe (E92) M3 2007-2013BMW 3 Coupe (E92) M3 GTS 2007-2013

€1,730.00*

Diffusor Carbon | fits BMW M3/M4 incl. Competition/CS (F80/F82/F83) S55 | Vorsteiner

ATTENTION: THIS DIFFUSER ONLY FITS MODELS UP TO THE FACELIFT AT THE BEGINNING OF 2017! The Vorsteiner carbon diffuser for the F80 and F82 ideally rounds off the rear of the vehicle. The combination of extreme sportiness and pure elegance from Vorsteiner leaves no questions unanswered. In addition to the visual factor, this full carbon rear apron also impresses in terms of lightweight construction, downforce on the rear axle and therefore the aerodynamics of the entire vehicle. In addition, the diffuser has a 4-step clear lacquer coating to protect it from UV rays. Expert opinion: Material certificate Compatible vehicles:BMW 3 (F30, F80) M3 CS 2018-2018BMW 3 (F30, F80) M3 Competition 2016-2018BMW 4 Convertible (F33, F83) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 2014-2020BMW 4 Coupe (F32, F82) M4 CS 2017-2019BMW 4 Coupe (F32, F82) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 GTS 2016-2019

€2,677.00*

Diffusor Carbon | fits BMW M5 incl. Competition (F90) S63 | 3DDesign

A high-end kit for a high-end car. The new F90 gets a new, innovative look. The new AERO body kit from 3DDesign for the F90 fits seamlessly into the familiar, discreetly aggressive race style of the 3DDesign lines. The iconic design is complemented by a perfect fit and the usual uncompromising quality. The real eye-catcher and centerpiece of the body kit - an carbon diffuser that is uncompromisingly and aggressively designed as a direct replacement part. The clear lines and curved shape fit perfectly into the image of the F90. Three inner fins not only ensure a racy look, but also optimum airflow. The F90 M5 carbon diffuser comes in two parts and can also be purchased separately. A performance diffuser for the F90, which is also a real visual upgrade! Pure luxury! Compatible vehicles:BMW 5 (G30, F90) M5 2017-2023BMW 5 (G30, F90) M5 Competition 2018-2023

From €1,620.00*

Details

Diffusor Carbon | fits BMW M6 incl. Competition (F06/F12/F13) S63 | 3DDesign

The 3DDesign carbon diffuser for the F06, F12 and F13 not only ensures an unmistakably sporty rear view of the vehicle. It also improves the downforce on the rear axle and thus the aerodynamics of the entire vehicle! Our premium partner 3DDesign is known as a perfectionist and stands for a high degree of individuality as well as the continuous further development of the product range. This rear apron is supplied without the matching rear splitter.Incl. parts certificate Compatible vehicles:BMW 6 Convertible (F12) M6 2012-2018BMW 6 Convertible (F12) M6 Competition 2013-2015BMW 6 Convertible (F12) M6 Competition 2015-2018BMW 6 Coupe (F13) M6 2012-2017BMW 6 Coupe (F13) M6 Competition 2013-2015BMW 6 Coupe (F13) M6 Competition 2015-2017BMW 6 Gran Coupe (F06) M6 2013-2018BMW 6 Gran Coupe (F06) M6 Competition 2013-2015BMW 6 Gran Coupe (F06) M6 Competition 2015-2018

€1,840.00*

Diffusor Carbon | fits BMW M6 incl. Competition (F06/F12/F13) S63 | Vorsteiner

The Vorsteiner carbon diffuser for the F06/F12/F13 improves the aerodynamics of the vehicle. Thanks to its uneven shape, it ensures pressure distribution at the rear and thus downforce. Made from autoclaved prepreg carbon fibre.Expertise: Material certificate Compatible vehicles:BMW 6 Convertible (F12) M6 2012-2018BMW 6 Convertible (F12) M6 Competition 2013-2015BMW 6 Convertible (F12) M6 Competition 2015-2018BMW 6 Coupe (F13) M6 2012-2017BMW 6 Coupe (F13) M6 Competition 2013-2015BMW 6 Coupe (F13) M6 Competition 2015-2017BMW 6 Gran Coupe (F06) M6 2013-2018BMW 6 Gran Coupe (F06) M6 Competition 2013-2015BMW 6 Gran Coupe (F06) M6 Competition 2015-2018

€2,677.00*

Diffusor Carbon | fits BMW M8 incl. Competition (F91/F92/F93) S63 | 3DDesign

3-piece 3DDesign carbon diffuser for the F91/F92/F93 Compatible vehicles:BMW 8 Convertible (G14, F91) M8 Since 2019BMW 8 Convertible (G14, F91) M8 Competition since 2019BMW 8 Coupe (G15, F92) M8 Since 2019BMW 8 Coupe (G15, F92) M8 Competition Since 2019BMW 8 Gran Coupe (G16, F93) M8 Since 2019BMW 8 Gran Coupe (G16, F93) M8 Competition Since 2019

From €1,745.00*

Details

Diffusor Carbon | fits BMW X5M (F85) 575hp S63 | 3DDesign

The 3DDesign carbon diffuser for the F85 gives the rear of the vehicle a completely new look. The diffuser is made of carbon fiber and is simply replaced with the original rear apron. Incl. parts certificate Compatible vehicles:BMW X5 (F15, F85) M 2014-2018

€1,170.00* €1,950.00* (40% saved)

Diffusor Carbon | fits Mini Cooper S JCW / JCW (F55/F56) | 3DDesign

The 3DDesign carbon diffuser for Mini Cooper JCW F55 F56 with PDC provides even more sportiness at the rear of the John Cooper Works in no time at all. The diffuser is made entirely of carbon fiber and has extra cut-outs for the Park Distance Control system. Incl. parts certificate for the F56.Material certificate for the F55 Compatible vehicles:MINI (F55) Cooper S JCW Since 2013MINI (F56) Cooper S JCW Since 2013MINI (F56) John Cooper Works Since 2015

€840.00* €1,400.00* (40% saved)

Diffusor Competition Dry Carbon | fits BMW M5 incl. Competition (F90) S63 | AutoTecknic

Dry Carbon Competition diffuser for the rear center diffuser of the F90. Designed to mount directly to the factory lower mounting position for quick and easy installation. The rear diffuser features durable and precise plastic mounting positions and is manufactured using autoclave technology for ultimate lightweight, high durability and precise fitment. Compatible vehicles:BMW 5 (G30, F90) M5 2017-2023BMW 5 (G30, F90) M5 Competition 2018-2023

€932.00*

Diffusor P-Style Carbon | fits BMW M5 (G90) S68 | Aulitzky Tuning

The G90 carbon diffuser gives your vehicle an aggressive sportiness and a lot of road presence.Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style fabric- High-gloss finish- Perfect fit- with certificate Compatible vehicles:- BMW G90 5 Series M5 535kW / 727hp (2024+)Note: This is NOT an original BMW product!

€1,899.00*

Diffusor Sport GT-Style Carbon | fits BMW M3 (E92/E93) S65 | RKP

RKP Carbon Diffusor SPORT for the E92/E93 Coupé/Cabrio in GT-Race-Style. Compatible vehicles:BMW 3 Convertible (E93) M3 2008-2013BMW 3 Coupe (E92) M3 2007-2013 The article has a material certificate.Installation: For bolting on.

€1,668.00*

Diffusor Type 1 Carbon | fits BMW M3/M4 incl. Competition/CS/GTS (F80/F82/F83) | 3DDesign

The 3DDesign carbon diffuser is made entirely of carbon fibre and fits both the F80 and the F82. The rear apron combines the elements of sportiness and elegance. In combination with the integrated side trim strips, the fins give the rear of the vehicle a fresh carbon fibre look. In addition, the downforce on the rear axle is increased, thus improving the aerodynamics of the vehicle. A type 2 diffuser from 3DDesign without the side mouldings is also available. Incl. parts certificate Compatible vehicles:BMW 4 Convertible (F33, F83) M4 2014-2020BMW 4 Convertible (F33, F83) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 2014-2020BMW 4 Coupe (F32, F82) M4 CS 2017-2019BMW 4 Coupe (F32, F82) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 GTS 2016-2019

€2,385.00*

Diffusor type 2 Carbon | fits BMW M3/M4 incl. Competition/CS/GTS (F80/F82/F83) | 3DDesign

The 3DDesign carbon diffuser type 2 is made entirely of carbon fibre and gives the rear of the F80 or F82 an individual look in no time at all. The combination of sportiness and elegance is particularly impressive across the board. In addition, the downforce on the rear axle is slightly increased, which has a positive effect on the aerodynamics of the vehicle. A Type 1 diffuser from 3DDesign is also available, which differs in that it has an additional fin on the side. Compatible vehicles:BMW 4 Convertible (F33, F83) M4 2014-2020BMW 4 Convertible (F33, F83) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 2014-2020BMW 4 Coupe (F32, F82) M4 CS 2017-2019BMW 4 Coupe (F32, F82) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 GTS 2016-2019

€2,190.00*

Door Set Carbon (4 pieces) | fits BMW 3 Series/M3 (G20/G80) | Aulitzky Tuning

Upgrade your G20/G80 with these carbon fibre doors that enhance both style and performance. Details:- Carbon fibre doors, made from high quality prepreg carbon fibre- Guaranteed accuracy of fit, 1:1 from the original- Largely reduced weight, the weight of the carbon fibre doors is less than 1/2 of the original doors.- Price is for 4 doors - front and rear Features:- Lightweight design: made from high quality carbon fibre, these doors are significantly lighter than the stock doors and reduce the overall weight of the vehicle for improved agility and acceleration.- Superior strength: Carbon fibre offers exceptional strength and rigidity, ensuring high durability and resilience while maintaining a slim profile.- Premium finish: The doors feature a high-gloss carbon fibre weave that gives your G20/G80 a refined, race-inspired look and complements its sporty design.- Exact fit: Designed specifically for the G20/G80, these doors offer a precise fit and seamless integration that meets OEM standards for alignment and function.- Improved performance: By reducing weight, these doors contribute to better handling, braking behaviour and improved driving dynamics.- Professional installation recommended: For best results, professional installation is recommended to ensure proper alignment and functionality with your vehicle's systems. Care instructions:Regular cleaning: Maintain carbon fibre parts by cleaning them regularly with a soft cloth and a mixture of mild soap and water. Avoid abrasive cleaners or harsh detergents that could damage the surface.Use microfibre pads and cloths: Use microfibre pads and cloths when cleaning or applying protective coatings to avoid scratching the surface.Protect the product from the sun and chemicals: Avoid direct sunlight and harsh chemicals, as these can damage the carbon fibre. If possible, use protective covers or park your vehicle in shaded areas. Installation:Although the installation of this product is relatively simple for the skilled DIY enthusiast, we still recommend installation by a professional mechanic.No special tools are required to install this product. Scope of delivery:- 4 carbon fibre doors (2x front doors per FS/BFS, 2x rear doors per FS/BFS)- Required mounting parts Compatible vehicles:All G20/G80 modelsNote: This is NOT an original BMW product!

€9,999.00*

Doors Carbon | fits BMW M2 (G87) S58 | Aulitzky Tuning

The high-quality Pre-Preg carbon fibre doors are an excellent addition to significantly enhance the style of your vehicle. Unlike regular carbon fibre, Pre-Preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee Scope of delivery:- 1x pair of doors (1x driver's door, 1x passenger door) Compatible vehicles:BMW G87 M2 Note: This is NOT an original BMW product!

€6,399.00*

DRLS Running Lights Yellow Module | fits BMW M2/M240i (G87/G42) S58 | Aulitzky Tuning

€329.00*

DRLS Running Lights Yellow Module | fits BMW M3/M4 incl. Competition (G22/G23/G80/G81/G82/G83) | Aulitzky Tuning

The daytime running lights bring a touch of the racetrack to the front bumper of your vehicle.The price is without installation.These are the complete modules including heat sink. No complex conversion is necessary for installation, the modules can simply be plugged in (Plug&Play). Not approved in the STVZO area. Only suitable for use in motorsport. Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of constructionBMW 3 Series (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 -BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510hp2993cm³S58 B30 A05.21 -BMW 4 Series (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 -BMW 4 Series (G82/G83)M4 Competition / xDrive375kW / 510hp2993cm³S58 B30 A05.21 -BMW 4 Series (G22/G23)4 Seriesallallall01.21 - Note: This is NOT an original BMW product!

€399.00*

Details

DRLS Running Lights Yellow | fits BMW 2 Series/M2 incl. Competition/CS (F22/F87) | Aulitzky Tuning

The F87/F22's adaptive LED headlights are already aggressive with the angled 3/4-style etched rings, but the vehicle has left room for improvement. The Yellow DRL upgrade gives your car the race-inspired look it deserves. Details:- Complete Yellow DRL LED boards for left and right headlights- Thermally conductive adhesive- Plug-and-play installation (fully reversible)- All OEM functionalities are retained- Complete installation instructions- 2 year warranty- Not approved in the area of the StVZO. Only suitable for use in motorsport. Installation is very simple: the modules can be easily installed in your own garage using plug-and-play and simple tools. The price does not include installation. Compatible vehicles:BMW F87/F22 2 Series LCI LED only (2018-2021)Note: This is NOT an original BMW product!Note: This is NOT an original BMW product!

€399.00*

Details

Dynamic side skirts Carbon | fits BMW M2 incl. Competition/CS (F87) | PSM | SPECIAL PRICE

High-quality side skirt set for the F87 with material certificate - Improved performance through more downforce - Vacuum infusion technology for rigidity and low weight - High-gloss UV-protected clear coat to protect against sun damage - Products are supplied with all necessary assembly parts - Guaranteed accuracy of fit - Made in California, USA Push the boundaries of what's possible! Dare to show your individualism with our PSM Dynamic Aerodynamic Automotive Components! These creations are designed to provide more stability at high speeds, increase downforce and smooth airflow. All products are handcrafted from the finest materials. All of our products are designed to fit perfectly with the manufacturer's original lines, seamlessly blending style and performance in one amazing package. SPECIAL PRICE - STOCK SALE - only one piece in stock! Compatible vehicles:VehicleTypePowerEngine capacityEngineYear of constructionBMW 2 Series Coupe (F87)M2272kW / 370hp2979ccN55 B30 A11.15 - 06.18BMW 2 Series Coupe (F87)M2 Competition302kW / 411hp2979ccS55 B30 A06.18 - 06.21BMW 2 Series Coupe (F87)M2 CS331kW / 450hp2979ccS55 B30 A11.19 - 06.21

€1,395.00* €2,326.00* (40.03% saved)

ECU cover Carbon | fits BMW M2/M3/M4 incl. Competition/CS/CSL (G80/G81/G82/G83/G87) | Aulitzky Tuning

The ECU battery cover made of pre-impregnated carbon fibre gives your engine compartment an elegant touch.By replacing the standard black plastic cover, you can give your vehicle a personalised touch. When you buy Pre-Preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run. Installation: Plug&Play Details:- 100% carbon fibre construction- High gloss finish- registration free Compatible vehicles:- BMW G87 M2 models- BMW G80 M3 Sedan models- BMW G81 M3 Touring models- BMW G82 M4 Coupé models- BMW G83 M4 Convertible models Note: This is NOT an original BMW product!

€569.00*

ECU covers Carbon | fits BMW M5 (G90/G99) S68 | Aulitzky Tuning

The ECU covers on the right and left are made of high-quality carbon fibre and give your vehicle that certain something. Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration free Scope of delivery:1x set of ECU covers (1x right and 1x left) Compatible vehicles:BMW M5 G90BMW M5 G99Note: This is NOT an original BMW product!

€599.00*

Engine cover Carbon with cutouts | fits for Lamborghini Huracan | Eventuri

Facts:Material: CarbonManufacturer: EventuriExpert opinion: without Our complete engine cover set is made from prepreg carbon fiber and has cutouts to expose our intake, which is sold separately. Available in a satin finish to reduce reflections into the interior and also contrast with the glossy intake system underneath. The complete set consists of the main center cover, two side covers and the rear strut cover. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine type Lamborghini Huracan5.2 LP 580-25.2 LP 610-25.2 LP 610-4426kW / 580hp449kW / 610hp449kW / 610hp5204cm³CSJB, DKBDGFACSJB, DKB Lamborghini HuracanLP 640-2470kW / 640hp5204cm³DGFB Lamborghini Huracan5.2 Performante470kW / 640hp5204cm³DGFB

€5,296.00*

Engine cover Carbon | fits Audi RS4/RS5 (B8/8K/8T) 450hp | Eventuri

Facts: Material: Carbon Manufacturer: Eventuri Expertise: Material certificate The Eventuri carbon engine cover provides extreme sportiness under the bonnet. Especially in combination with the Eventuri intake system and the slam panel (front cover), the look under the bonnet will make you salivate. Compatible vehicles:VehicleTypePowerEngine capacityEngine type Audi A4 (B8/8K)RS4 quattro331kW / 450hp4136cm³CFSA Audi A5 (B8/8T)RS5 quattro331kW / 450hp4136cm³CFSA

€955.00*

Engine cover Carbon | fits Audi RS6/RS7 (C8/4A/4K) | Eventuri

Facts: Material: Carbon Manufacturer: Eventuri Made from prepreg carbon fibre and Kevlar - this engine cover is a direct replacement for the Audi C8 RS6 plastic engine cover. Available in gloss and matte finish. Compatible vehicles:VehicleTypePower outputEngine capacityEngineYear of construction Audi A6 (C8/4A)RS6 quattro441kW / 600hp463kW / 630hp3996cm³DJPB, DWLA, DYGBDYGA09.19 -01.23 - 10.23 Audi A7 (C8/4K)RS7 quattro441kW / 600hp463kW / 630hp3996cm³DJPB, DWLA, DYGBDYGA10.19 -01.23 -

€804.00*

Details

Engine cover Carbon | fits BMW M135i/M235i (F20/F22), 335i/435i (F30/F32), M2 (F87) N55 | Eventuri

Facts:Material: CarbonManufacturer: EventuriExpert opinion: Material certificate The Eventuri carbon engine cover for the N55 engine also provides a sporty ambience when looking under the hood.Especially in combination with the Eventuri intake, the engine compartment shines in a completely new look.Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 1er (F20/F21)M135i / xDrive235kW / 320hp240kW / 326hp2979cm³N55 B30 A12.11 - 02.1503.15 - 06.16 BMW 2er (F22/F23)M235i / xDrive240kW / 326hp2979cm³N55 B30 A10.13 - 06.16 BMW 2er Coupe (F87)M2272kW / 370hp2979cm³N55 B30 A11.15 - 06.18 BMW 3er (F30/F31/F34)335i / xDrive225kW / 306hp240kW / 326hp250kW / 326hp2979cm³N55 B30 A11.11 - 07.1511.11 - 06.1307.13 - 06.16 BMW 4er (F32/F33/F36)435i / xDrive225kW / 306hp250kW / 340hp2979cm³N55 B30 A07.13 - 02.16

€1,018.00*

Engine cover Carbon | fits BMW M140i/M240i (F20/F21/F22/F23) | 340i/440i (F30/F/31/F32/F33/F36) B58 | Eventuri

Facts: Material: Carbon Manufacturer: Eventuri Expert opinion: Material certificate Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 1er (F20/F21)M140i / xDrive250kW / 340hp2998cm³B58 B30 A09.15 - BMW 2er (F22/F23)M240i / xDrive250kW / 340hp2998cm³B58 B30 A09.15 - 06.21 BMW 3er (F30/F31/F34)340i / xDrive240kW / 326hp265kW / 360hp2998cm³B58 B30 A07.15 - 10.18 BMW 4er (F32/F33/F36)440i / xDrive240kW / 326hp265kW / 360hp2998cm³B58 B30 A03.16 - 06.20

€791.00*

Engine cover Carbon | fits BMW M2 (F87) N55 | Eventuri

Facts: Material: Carbon Manufacturer: Eventuri Expert opinion: Material certificate The Eventuri carbon engine cover for F87 supports the intake system in a visual way. This cover is only designed for the F87, as an extra indentation is incorporated into which the original stripe can be inserted. However, this is not supplied with the cover, but must be taken from the original cover! The cover thus creates a unique carbon look in the blink of an eye and also ensures envious glances when looking under the bonnet.Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction BMW 2 Series Coupe (F87)M2272kW / 370hp2979cm³N55 B30 A11.15 - 06.18

€1,018.00*

Engine cover Carbon | fits BMW M2/M3/M4 incl. Competition (G80/G81/G82/G83/G87) | Aulitzky Tuning

Our high-quality engine cover made from pre-preg carbon fibre is a great addition to enhance the style of your vehicle.The carbon fibre engine cover replaces the standard plastic part. When you buy Pre-Preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run. Installation: Plug&Play Details:- 100% carbon fibre construction- High gloss finish- Performance style design- Supplied with 3M double-sided adhesive tape already attached- Use rubber adapter from the original engine cover + emblem- registration free Compatible vehicles with S58 engine:- BMW G87 M2 - BMW G80 M3 Sedan (2021+)- BMW G80 M3 Competition Sedan (2021+)- BMW G81 M3 Touring (2023+)- BMW G81 M3 Competition Touring (2023+)- BMW G82 M4 Coupé (2021+)- BMW G82 M4 Competition Coupé (2021+)- BMW G83 M4 Convertible (2021+)- BMW G83 M4 Competition Convertible (2021+) Note: This is NOT an original BMW product!

€619.00*

Engine cover Carbon | fits BMW M3/M4 incl. Competition (G80/G81/G82/G83) S58 | Eventuri

Facts: Material: Carbon glossy Manufacturer: Eventuri Expert opinion: Material certificate The G80/G82 is one of Munich's flagship cars and deserves an engine bay that looks as good as it performs. Since the OEM cover makes the engine bay look unfinished, we redesigned it to achieve much-needed symmetry and give the engine a more complete aesthetic. Our cover extends over the intercooler and still allows for adequate heat dissipation through additional venting. Made from prepreg carbon fibre, our engine cover is a direct replacement using the OEM brackets. Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of constructionBMW 3 Series (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 -BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510hp2993cm³S58 B30 A05.21 -BMW 4 Series (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 -BMW 4 Series (G82/G83)M4 Competition / xDrive375kW / 510hp2993cm³S58 B30 A05.21 -

€1,125.00*

Engine cover Carbon | fits BMW M3/M4 incl. Competition/CS/GTS (F80/F82/F83) S55 | Eventuri

Facts: Material: Carbon Manufacturer: Eventuri The Eventuri carbon engine cover for the F8x models ensures extreme sportiness and above all individuality under the bonnet, especially in combination with the Eventuri intake, which is also available in carbon or Kevlar! Suitable for the BMW S55 engine. Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction BMW 3 Series (F80)M3317kW / 431hp2979cm³S55 B30 A03.14 - 10.18 BMW 3 Series (F80)M3 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 10.18 BMW 3 Series (F80)M3 CS338kW / 460hp2979cm³S55 B30 A01.18 - 10.18 BMW 4 Series (F82/F83)M4317kW / 431hp2979cm³S55 B30 A03.14 - 07.20 BMW 4 Series (F82/F83)M4 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 07.20 BMW 4 Series Coupe (F82)M4 CS338kW / 460hp2979cm³S55 B30 A07.17 - 06.19 BMW 4 Series Coupe (F82)M4 GTS368kW / 500hp2979cm³S55 B30 A03.16 - 06.19

€898.00*

Engine cover Carbon | fits BMW M5 (G90/G99) S68 | Aulitzky Tuning

Our high-quality engine cover made from pre-preg carbon fibre is a great addition to enhance the style of your vehicle.The carbon fibre engine cover replaces the standard plastic part. When you buy Pre-Preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run. Installation: Plug&Play Details:- 100% carbon fibre construction- High gloss finish- Performance style design- Supplied with 3M double-sided adhesive tape already attached- Use rubber adapter from the original engine cover + emblem- registration free Compatible vehicles with S58 engine:- BMW G90 M5 - BMW G99 M5 Touring Note: This is NOT an original BMW product!

€1,299.00*

Engine cover Carbon | fits Chevrolet Corvette (C8) Coupe 6.2L | Eventuri

Facts: Material: Carbon Manufacturer: Eventuri Expert opinion: without Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine type Chevrolet Corvette (C8)6.2354kW / 481hp369kW / 502hp6162cm³LT2(376CUV8)

€655.00*

Engine cover Carbon | fits for Audi RS3 (8V/8Y)/ TTRS (8S)/ RSQ3 (F3), Cupra Formentor VZ5 (KM) | Eventuri

Material: Carbon Manufacturer: Eventuri Parts certificate: Material certificate Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine type Audi A3 (8V)RS3 quattro294kW / 400hp2480cm³DAZA, DNWA Audi A3 (8Y)RS3 quattro294kW / 400hp2480cm³DNWC Audi TT (8J1/8S)TTRS quattro294kW / 400hp2480cm³DAZA, DNWA Audi Q3 (F3) 2019+RSQ3 quattro294kW / 400hp2480cm³DAZA, DNWA Cupra Formentor (KM)VZ5 4Drive287kW / 390hp2480cm³DNWB

€728.00*

Engine cover Carbon | fits Honda Civic Gen.9 Type-R (FK2) 310hp | Eventuri

The Eventuri carbon engine cover for Honda Civic FK2 Type R, especially in conjunction with the intake system, ensures envious glances when opening the hood.The engine cover is made entirely of carbon fiber and can also be produced in different colored Kevlar structures (red, blue, yellow) on request.The side panel is not included with this engine cover, but can be ordered separately. Expert opinion: Material certificate Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeYear of construction Honda Civic (FK2)Type-R228kW / 310hp1996cm³K20C108.15 - 12.16

€615.00*

Engine cover Carbon | fits Honda Civic Gen.9 Type-R (FK2) 310hp, Gen.10 Type-R (FK8) 320hp | Eventuri

The Eventuri FK8 and FK2 engine cover is made of black carbon and red Kevlar and fits directly on the FK8 and also on the FK2 Type-R. Expert opinion: Material certificate Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Honda Civic (FK2)Type-R228kW / 310hp1996cm³K20C108.15 - 12.16 Honda Civic (FK8)Type-R235kW / 320hp1996cm³K20C106.17 - 12.22

€615.00*

Engine cover Carbon | fits Toyota Supra (DB/A90) | Eventuri

Eventuri carbon engine cover for Toyota Supra MK5 A90 2020+Material: CarbonManufacturer: EventuriType of certificate: Material certificate Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Toyota Supra2.0145kW / 197hp190kW / 258hp1998cm³B4806.19 - Toyota SupraGR (A90/DB)250kW / 340hp2998cm³B5803.19 -

€732.00*

Engine cover Carbon | fits VAG 2.0 EA888 Gen.4 Golf 8 GTI/CS/R, S3 (8Y), TTS (8S), Leon (KL), Formentor | Eventuri

Facts: Material: Carbon Manufacturer: Eventuri We are pleased to release our carbon engine cover for the VW Golf 8 platform.Compatible vehicles: VehicleTypePowerEngine capacityEngine type Audi A3 (8Y)S3 2.0 TFSI quattro228kW / 310hp1984cm³DNFB (from 09.20) Audi TT (8J1/8S)45 TFSI quattro180kW / 245hp1984cm³DNPA (from 10.20) Audi TT (8J1/8S)TTS 2.0 TFSI quattro235kW / 320hp1984cm³DNFD (from 11.20) Audi Q3 (F3)45 TFSI quattro180kW / 245hp1984cm³DNPA (from 01.21) Cupra Ateca (KH)2.0 TSI 4Drive221kW / 300hp1984cm³DNFC (from 07.20) Cupra Formentor (KM)2.0 TSI 4Drive140kW / 190hp1984cm³DNPA (from 03.21) Cupra Formentor (KM)2.0 TSI180kW / 245hp1984cm³DNPA (from 03.21) Cupra Formentor (KM)2.0 TSI 4Drive228kW / 310hp1984cm³DNFB (from 11.20) Cupra Leon (KL)2.0 TSI180kW / 245hp1984cm³DNPA (from 04.21) Cupra Leon (KL)2.0 TSI221kW / 300hp228kW / 310hp1984cm³DNFC (from 01.21)DNFB (from 06.21) Seat Tarraco (KN)2.0 TFSI 4Drive180kW / 245hp1984cm³DNPA (from 01.21) Skoda KodiaqRS 2.0 TSI 4x4180kW / 245hp1984cm³DNPA (from 06.21) Skoda Octavia IV (NX)RS 2.0 TFSI180kW / 245hp1984cm³DNPA (from 09.20) Skoda Superb III (3V)2.0 TSI 4x4206kW / 280hp1984cm³DNFE (from 11.20) VW Arteon2.0 TSI 4motionR 2.0 TSI 4motion206kW / 280hp235kW / 320hp1984cm³DNFE (from 11.20)DNFG (from 12.20) VW Golf 8GTI 2.0 TSI180kW / 245hp1984cm³DNPA (from 08.20) VW Golf 8GTI Clubsport/ED45 2.0 TSI221kW / 300hp1984cm³DNFC (from 10.20) VW Golf 8R 2.0 TSI 4motion235kW / 320hp1984cm³DNFG (from 12.20) VW Passat B8 (3G)2.0 TSI 4motion206kW / 280hp1984cm³DNFE (from 11.20) VW T-Roc (A1 Facelift)2.0 TSI 4motion221kW / 300hp1984cm³DNFC (from 11.21) VW Tiguan II (AD)2.0 TSI 4motion180kW / 245hp1984cm³DNPA (from 11.20) VW Tiguan II (AD)R 2.0 TSI 4motion235kW / 320hp1984cm³DNFG (from 11.20)

€731.85*

Engine cover large Carbon | fits BMW M2/M3/M4 incl. Competition (G80/G81/G82/G83/G87) | Aulitzky Tuning

Our high-quality and large engine cover made of pre-preg carbon fibre is a great addition to enhance the style of your vehicle. The carbon fibre engine cover replaces the standard plastic part. When you buy Pre-Preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run. Installation: Plug&Play Details:- 100% carbon fibre construction- High gloss finish- Performance style design- Supplied with 3M double-sided adhesive tape already attached- Use rubber adapter from the original engine cover + emblem- registration free Compatible vehicles with S58 engine:- BMW G87 M2 - BMW G80 M3 Sedan (2021+)- BMW G80 M3 Competition Sedan (2021+)- BMW G81 M3 Touring (2023+)- BMW G81 M3 Competition Touring (2023+)- BMW G82 M4 Coupé (2021+)- BMW G82 M4 Competition Coupé (2021+)- BMW G83 M4 Convertible (2021+)- BMW G83 M4 Competition Convertible (2021+) Note: This is NOT an original BMW product!

€1,149.00*

Entry sill cover Carbon | fits BMW 2 Series (G42) | Aulitzky Tuning

The high-quality carbon entry sill cover is an excellent addition to significantly enhance the style of your vehicle. Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration free Scope of delivery:- 1x carbon Entry sill cover Compatible vehicles:BMW G42 2 Series Note: This is NOT an original BMW product!

€789.00*

Entry sill cover Carbon | fits BMW M2 (G87) S58 | Aulitzky Tuning

€789.00*

Entry sill surround cover Carbon | fits BMW BMW 4 Series (G22) | Aulitzky Tuning

The high-quality carbon sill surround covers are an excellent addition to significantly enhance the style of your vehicle. Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration free Scope of delivery:- 1x carbon Entry sill surround cover Compatible vehicles:BMW G22 4 Series Note: This is NOT an original BMW product!

€399.00*

Entry sill surround cover Carbon | fits BMW BMW M4 incl. Competition/CSL (G82/G83) S58 | Aulitzky Tuning

The high-quality carbon sill surround covers are an excellent addition to significantly enhance the style of your vehicle. Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration free Scope of delivery:- 1x carbon Entry sill surround cover Compatible vehicles:BMW G82/G83 M4 Note: This is NOT an original BMW product!

€399.00*

Entry sill surround cover Carbon | fits BMW M2 (G87) S58 | Aulitzky Tuning

€399.00*

Fender Air Inlets Carbon | fits BMW X5M incl. Competition (F95) S63 | AutoTecknic

No detail is too small to customise: Enthusiasts know that every change can make a big difference. The same goes for this AutoTecknic carbon fibre side vent kit. When it comes to carbon fibre, you're guaranteed to get a unique and lightweight design, not to mention incredible robustness. Leave no stone unturned when it comes to your vehicle. Bring your vision to life with AutoTecknic. Product info:- Suitable for F95 X5M models- 2x2 glossy carbon fibre fabric- Sold as a pair (as a set)- OEM X5M side grills are not included Compatible vehicles:BMW X5 (G05, F95) M 2019-2023BMW X5 (G05, F95) M Competition since 2019

€349.00*

Fender cover Carbon | fits BMW M3/M4 incl. Competition/CS/GTS (F80/F82/F83) S55 | AutoTecknic

Designed and engineered with the OEM standard as the frame, these AutoTecknic dry carbon fibre wing trims are made with 100% dry carbon fibre composite material and fused with abs tabs that result in strong tabs throughout the durable construction for a secure and seamless fit. As an AutoTecknic standard, each trim piece is individually manufactured with precision, resulting in superior paint quality to accentuate any vehicle. The name of dry carbon fibre comes from its manufacturing process. Dry carbon fibre is formed by using a "pre-impregnated" or impregnated piece of carbon material. This piece of carbon is first placed in a mould and then placed in a sealed autoclave to cure properly. This method produces the least amount of waste and forms a lighter version of the carbon than the "wet" method. The autoclave vacuuming process in the production of dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest quality version of carbon fibre products produced. Package includes one pair (passenger and driver side) as a direct OEM replacement for wing liners. Note: The emblems shown in the photos are for demonstration purposes only. The emblems are not included in the package. Original emblems can be reused, or new emblems could be purchased through other suppliers. Compatible vehicles:BMW 3 (F30, F80) M3 2014-2018BMW 3 (F30, F80) M3 CS 2018-2018BMW 3 (F30, F80) M3 Competition 2016-2018BMW 4 Convertible (F33, F83) M4 2014-2020BMW 4 Convertible (F33, F83) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 2014-2020BMW 4 Coupe (F32, F82) M4 CS 2017-2019BMW 4 Coupe (F32, F82) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 GTS 2016-2019

€299.00*

Fender grille Carbon | fits BMW M2 (F87) N55 | AutoTecknic

AutoTecknic Carbon Mudguard Trim - F87 Compatible vehicles:BMW 2 Coupe (F22, F87) M2 2015-2018

€259.00*

Fender replacement element Carbon | fits BMW M2 (F87) N55 | Aulitzky Tuning

The fender elements made of pre-preg carbon fiber perfectly emphasize the style of the vehicle.Details:- 100% pure pre-preg carbon fibre construction- OEM style carbon fibre- High gloss finish- Perfect fit- Registration free Compatible vehicles:- BMW F87 2 Series M2/Competition Note: This is NOT an original BMW product!

€329.00*

Front attachments Carbon | fits BMW M2 incl. Competition (F87) N55/S55 | Aulitzky Tuning

The Front attachments made of pre-preg carbon fiber emphasizes the style of the vehicle perfectly.Details:- 100% pure pre-preg carbon fibre construction- OEM style carbon fibre- High gloss finish- Perfect fit- With parts certificate according to §19.3 Compatible vehicles:- BMW F87 2 Series M2/Competition Note: This is NOT an original BMW product!

€359.00*

Details

Front bumper Carbon | fits BMW M4 incl. Competition/CS/GTS (F82/F83) | 3DDesign

The 3DDesign carbon front bumper spoiler for F82 not only sets new standards visually. The complete bumper is made of carbon fiber and can be painted as desired. Several design variants are already shown in the photos. Visually, this version by specialist is unique. In terms of weight, this full carbon front end is also unrivaled. Compatible vehicles:BMW 4 Convertible (F33, F83) M4 2014-2020BMW 4 Convertible (F33, F83) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 2014-2020BMW 4 Coupe (F32, F82) M4 CS 2017-2019BMW 4 Coupe (F32, F82) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 GTS 2016-2019

€7,693.00*

Front bumper Carbon | fits Lamborghini Huracan | Vorsteiner

The Vorsteiner carbon front bumper for Lamborghini Huracan Novara Edizione reduces the weight and improves the aerodynamics of the vehicle. The Novara body kit also sets new visual standards! Made from autoclaved prepreg carbon fibre.Expertise: Material certificate Compatible vehicles:LAMBORGHINI HURACÁN 5.2 LP 580-2 2015-2019LAMBORGHINI HURACÁN 5.2 LP 610-2 Since 2020LAMBORGHINI HURACÁN 5.2 LP 610-4 Since 2014LAMBORGHINI HURACÁN SPYDER 5.2 LP 580-2 Since 2016LAMBORGHINI HURACÁN SPYDER 5.2 LP 610-4 Since 2015

€9,162.00*

Front bumper insert Carbon with slats | fits BMW M5 (G90/G99) S68 | Aulitzky Tuning

The front bumper insert with slats made of pre-preg carbon fiber gives your vehicle a distinctly sporty aggressiveness and makes it stand out on the road.Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x front bumper insert in prepreg carbon fibre Compatible vehicles:BMW M5 G90BMW M5 G99 TouringNote: This is NOT an original BMW product!

€1,449.00*

Front bumper insert Carbon | fits BMW M5 (G90/G99) S68 | Aulitzky Tuning

The front bumper insert made of pre-preg carbon fiber gives your vehicle a distinctly sporty aggressiveness and makes it stand out on the road.Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x front bumper insert in prepreg carbon fibre Compatible vehicles:BMW M5 G90BMW M5 G99 TouringNote: This is NOT an original BMW product!

€1,349.00*

Front bumper insert OEM Carbon | fits BMW M2 (G87) S58 | Aulitzky Tuning

Our high quality OEM front bumper insert made from pre-preg carbon fibre is a great addition to significantly increase the style and aggressiveness of your vehicle. Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x front bumper insert made from glossy prepreg carbon fibre Compatible vehicles:BMW G87 2 Series M2 (2023+) Note: This is NOT an original BMW product!

€839.00*

Front bumper insert SOOQOO Carbon | fits BMW M2 (G87) S58 | Aulitzky Tuning

Our high quality SOOQOO front bumper insert made from pre-preg carbon fibre is a great addition to significantly increase the style and aggressiveness of your vehicle. Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x SOOQOO front bumper insert made from glossy prepreg carbon fibre Compatible vehicles:BMW G87 2 Series M2 (2023+) Note: This is NOT an original BMW product!

€1,149.00*

Front bumper with front splitter 570-VX Aero Carbon | fits McLaren 570S | Vorsteiner

Vorsteiner 570-VX Aero Carbon front bumper with front splitter for McLaren 570S Expertise: Material certificate Compatible vehicles:MCLAREN 570S 3.8 Since 2015MCLAREN 570S Spider 3.8 since 2017

€9,043.00*

Front diffuser Carbon | fits BMW M3 (E90/E92/E93) S65 | RKP

The RKP carbon front diffuser for BMW E9x is the optimum in terms of downforce on the front axle. This front diffuser has a similar effect to the famous Varis System 1 diffuser at the rear. It prevents air turbulence under the car, which has a positive effect on the aerodynamics of the entire vehicle. The front diffuser is also made entirely of carbon fiber, so there is no need to worry about weight. Perfect for the race track! Compatible vehicles:BMW 3 (E90) M3 2007-2011BMW 3 (E90) M3 CRT 2011-2011BMW 3 Convertible (E93) M3 2008-2013BMW 3 Coupe (E92) M3 2007-2013BMW 3 Coupe (E92) M3 GTS 2007-2013

€4,499.00*

Front diffuser/spoiler lip V.2 with flaps | fits Skoda Octavia RS MK4 (NX) | Maxton Design | SPECIAL PRICE

The splitter is painted black and is wide enough to fit. The splitter visually lowers the front bumper by 3-5 cm (depending on the model) and improves the aerodynamics of the vehicle. The product is made of ABS plastic - this is characterized by increased strength and flexibility. With material certificate. Contents:Cup spoiler lip front attachmentFitting kitFitting instructionsFlapsFastening screws for flaps (silver)You have to mount the flaps on the splitter yourself. SPECIAL PRICE - STOCK SALE - Product may have minor defects (e.g. small scratches)

€225.00* €249.00* (9.64% saved)

Front fender Carbon | fits Lamborghini Huracan | Vorsteiner

The Vorsteiner carbon front mudguards for Lamborghini Huracan Novara Edizione reduce the weight of the vehicle and improve cooling thanks to the integrated air intakes. A splash guard is also provided. Brutal looks included! Made from autoclaved prepreg carbon fibre.Expertise: Material certificate Compatible vehicles:LAMBORGHINI HURACÁN 5.2 LP 580-2 2015-2019LAMBORGHINI HURACÁN 5.2 LP 610-2 Since 2020LAMBORGHINI HURACÁN 5.2 LP 610-4 Since 2014LAMBORGHINI HURACÁN SPYDER 5.2 LP 580-2 Since 2016LAMBORGHINI HURACÁN SPYDER 5.2 LP 610-4 Since 2015

€12,494.00*

Front grille C-Style Carbon | fits BMW M2 (G87) S58 | Aulitzky Tuning

The high-quality C-style front grille made from pre-preg carbon fibre is an excellent addition to significantly enhance the style of your vehicle. Unlike regular carbon fibre, Pre-Preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x front grille Compatible vehicles:BMW G87 2 Series M2 Please note: The original M2 logo cannot be transferred to facelift models. Note: This is NOT an original BMW product!

€689.00*

Front grille Carbon | fits BMW 3 Series incl. M3/GTS (E92/E93) | AutoTecknic

AutoTecknic Carbon Front Grille - E92 Pre-LCI Coupe - Plain Weave Compatible vehicles:BMW 3 Cabriolet (E93) 320 d 2007-2010BMW 3 Cabriolet (E93) 320 d 2008-2010BMW 3 Cabriolet (E93) 320 d 2008-2013BMW 3 Cabriolet (E93) 320 i 2006-2013BMW 3 Cabriolet (E93) 320 i 2007-2013BMW 3 Cabriolet (E93) 320 i 2007-2013BMW 3 Cabriolet (E93) 323 i 2007-2011BMW 3 Cabriolet (E93) 325 d 2007-2010BMW 3 Cabriolet (E93) 325 d 2007-2010BMW 3 Cabriolet (E93) 325 i 2006-2010BMW 3 Cabriolet (E93) 325 i 2006-2013BMW 3 Cabriolet (E93) 325 i 2007-2013BMW 3 Cabriolet (E93) 330 d 2007-2013BMW 3 Cabriolet (E93) 330 i 2007-2010BMW 3 Cabriolet (E93) 330 i 2007-2013BMW 3 Cabriolet (E93) 335 i 2006-2013BMW 3 Cabriolet (E93) M3 2008-2013BMW 3 Coupe (E92) 316 i 2007-2013BMW 3 Coupe (E92) 320 d 2006-2010BMW 3 Coupe (E92) 320 d 2006-2010BMW 3 Coupe (E92) 320 d 2007-2013BMW 3 Coupe (E92) 320 i 2007-2013BMW 3 Coupe (E92) 320 i 2007-2013BMW 3 Coupe (E92) 320 i 2007-2013BMW 3 Coupe (E92) 323 i 2006-2012BMW 3 Coupe (E92) 325 d 2007-2010BMW 3 Coupe (E92) 325 d 2007-2010BMW 3 Coupe (E92) 325 i 2006-2010BMW 3 Coupe (E92) 325 i 2007-2013BMW 3 Coupe (E92) 325 i 2010-2013BMW 3 Coupe (E92) 325 i xDrive 2008-2013BMW 3 Coupe (E92) 325 i xDrive 2008-2013BMW 3 Coupe (E92) 325 i xDrive 2010-2013BMW 3 Coupe (E92) 325 xi 2006-2010BMW 3 Coupe (E92) 325 xi 2007-2008BMW 3 Coupe (E92) 325 xi 2007-2008BMW 3 Coupe (E92) 328 i 2006-2013BMW 3 Coupe (E92) 330 d 2006-2008BMW 3 Coupe (E92) 330 i 2006-2010BMW 3 Coupe (E92) 330 i 2007-2013BMW 3 Coupe (E92) 330 i xDrive 2010-2013BMW 3 Coupe (E92) 330 xd 2006-2008BMW 3 Coupe (E92) 330 xi 2006-2007BMW 3 Coupe (E92) 330 xi 2006-2007BMW 3 Coupe (E92) 330 xi 2007-2010BMW 3 Coupe (E92) 335 d 2006-2013BMW 3 Coupe (E92) 335 i 2006-2013BMW 3 Coupe (E92) 335 i 2006-2013BMW 3 Coupe (E92) 335 i xDrive 2008-2013BMW 3 Coupe (E92) 335 xi 2007-2010BMW 3 Coupe (E92) M3 2007-2013BMW 3 Coupe (E92) M3 GTS 2007-2013

€249.00*

Front grille carbon | fits BMW M3/M4 incl. Competition (G80/G81/G82/G83) | Aulitzky Tuning

Enhance the aesthetics of the front of your G8X with this carbon fibre front grille. Made from state-of-the-art pre-preg carbon fibre, this grille enhances the aggressive character of the G8X, making your vehicle stand out both on the road and on social media.The road presence this grille offers is unrivalled. You will be amazed by the transformation.The original logo is not included. You can continue to use your old emblem or purchase a new one separately. Details:- 100% pure pre-preg carbon fibre construction- OEM-style fabric- High-gloss surface- Fit guarantee- Fits the OEM grille clip positions- With parts certificate according to §19.3 Compatible vehicles:- BMW G80 M3/Competition Sedan (2021+)- BMW G81 M3 Competition Touring (2021+)- BMW G82 M4/Competition Coupe (2021+)- BMW G83 M4 Competition Convertible (2021+)Note: This is NOT an original BMW product!

€1,179.00*

Details

Front grille Carbon | fits BMW Z4 (G29) | Aulitzky Tuning

Experience the fascinating world of the carbon front grille customised for the G29. This was developed to give your vehicle a unique look. By utilising all original clip and screw positions, a secure attachment and perfect fit is guaranteed. Installation is simplified by the pre-mounted adhesive tape, which enables seamless integration and adaptation to the body line. Unlike normal carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be an astonishing 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Guaranteed fit- registration free Scope of delivery:- 1x set front grille Compatible vehicles:BMW G29 Z4 Roadster Note: This is NOT an original BMW product!

€419.00*

Front grille CS Carbon | fits BMW M2 (G87) S58 | Aulitzky Tuning

The high-quality CS front grille made from pre-preg carbon fibre is an excellent addition to significantly enhance the style of your vehicle. Unlike regular carbon fibre, Pre-Preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x front grille Compatible vehicles:BMW G87 2 Series M2 Please note: The original M2 logo cannot be transferred to facelift models. Note: This is NOT an original BMW product!

€649.00*

Front grille SOOQOO Carbon | fits BMW M2 (G87) S58 | Aulitzky Tuning

Experience the fascinating world of the carbon front grille customised for the G87. This was developed to give your vehicle a unique look. By utilising all original clip and screw positions, a secure attachment and perfect fit is guaranteed. Installation is simplified by the pre-mounted adhesive tape, which enables seamless integration and adaptation to the body line. Unlike normal carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be an astonishing 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- with parts certificate according to §19.3 Scope of delivery:- 1x set SOOQOO front grille Compatible vehicles:BMW G87 2 Series M2 Please note: The original M2 logo cannot be transferred to facelift models. Note: This is NOT an original BMW product!

€589.00*

Front grille SOOQOO V-Style Carbon | fits BMW M2 (G87) S58 | Aulitzky Tuning

Experience the fascinating world of the V-style carbon front grille customised for the G87. This was developed to give your vehicle a unique look. The use of all original clip and screw positions ensures secure attachment and a perfect fit. Installation is simplified by the pre-mounted adhesive tape, which enables seamless integration and adaptation to the body line. Unlike normal carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be an astonishing 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- with parts certificate according to §19.3 Scope of delivery:- 1x set SOOQOO V-style front grille Compatible vehicles:BMW G87 2 Series M2 Please note: The original M2 logo cannot be transferred to facelift models. Note: This is NOT an original BMW product!

€629.00*

Front intakes Carbon | fits BMW M2 (G87) S58 | Aulitzky Tuning

The high-quality front intakes made from Pre-Preg carbon fibre are an excellent addition to significantly enhance the style of your vehicle. Unlike regular carbon fibre, Pre-Preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x pair of air intakes Compatible vehicles:BMW G87 2 Series M2 Note: This is NOT an original BMW product!

€749.00*

Front intakes SOOQOO Carbon | fits BMW M2 (G87) S58 | Aulitzky Tuning

The high-quality SOOQOO front intakes made from Pre-Preg carbon fibre are an excellent addition to significantly enhance the style of your vehicle. Unlike regular carbon fibre, Pre-Preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- With parts certification according to §19.3 Scope of delivery:- 1x pair of SOOQOO air intakes Compatible vehicles:BMW G87 2 Series M2 Note: This is NOT an original BMW product!

€749.00*

Front intakes SOOQOO Carbon | fits BMW M3/M4 incl. Competition (G80/G81/G82/G83) | Aulitzky Tuning

The carbon front intakes are an absolute highlight for your vehicle and give it an even sportier look.Key features:- 100% pure prepreg carbon fibre- OEM style weave- High gloss finish- Fitment guarantee- 1 year warranty - With parts certificate according to §19.3 Scope of delivery:1x front spoiler made of glossy prepreg carbon fiber incl. mounting material Compatible vehicles:BMW G80 M3 SedanBMW G81 M3 TouringBMW G82 M4 CoupeBMW G83 M4 Convertible Note: This is NOT an original BMW product!

€849.00*

Front lip Carbon | fits BMW 1 Series LCI incl. M135i/M140i (F20) | 3DDesign

Finally here - the 3DDesign carbon front lip for the F20 Facelift (LCI) with M package. The high-quality design line from 3DDesign also extends to the new F20 components. Discreet yet individual and unique. All parts are of course made of the best quality materials and workmanship. Perfect fit meets high-end design. Compatible vehicles:BMW 1 (F20) 116 i 2015-2019BMW 1 (F20) 118 d 2015-2019BMW 1 (F20) 118 i 2015-2019BMW 1 (F20) 120 d 2015-2019BMW 1 (F20) 120 d xDrive 2015-2019BMW 1 (F20) 120 i 2015-2019BMW 1 (F20) 125 d 2015-2019BMW 1 (F20) 125 i 2016-2019BMW 1 (F20) 125 i Active Flex 2014-2017BMW 1 (F20) M 135 i 2015-2016BMW 1 (F20) M 135 i xDrive 2015-2016BMW 1 (F20) M 140 i 2016-2019BMW 1 (F20) M 140 i xDrive 2016-2019

€1,510.00*

Front lip Carbon | fits BMW 3 Series M-Package incl. M340i/M340d (G20) | 3Design

Perfectly shaped, sporty front lip made of carbon for the G20 M340 models with M package. No compromises were made in the production and design of the latest addition to the 3DDesign portfolio: Perfect quality meets a design that blends seamlessly into the design concept of the new G20 and G21. Sporty and elegant - a real eye-catcher. Fits only on the M-package front. Compatible vehicles:BMW 3 (G20, G80, G28) 316 d since 2020BMW 3 (G20, G80, G28) 316 d Mild-Hybrid Since 2020BMW 3 (G20, G80, G28) 318 d 2019-2020BMW 3 (G20, G80, G28) 318 d Mild-Hybrid Since 2020BMW 3 (G20, G80, G28) 318 i Since 2020BMW 3 (G20, G80, G28) 320 d Since 2018BMW 3 (G20, G80, G28) 320 d Mild-Hybrid Since 2020BMW 3 (G20, G80, G28) 320 d Mild-Hybrid xDrive Since 2020BMW 3 (G20, G80, G28) 320 d xDrive 2018-2020BMW 3 (G20, G80, G28) 320 e Plug-in Hybrid Since 2020BMW 3 (G20, G80, G28) 320 i Since 2019BMW 3 (G20, G80, G28) 320 i 1.6 Since 2019BMW 3 (G20, G80, G28) 320 i xDrive Since 2019BMW 3 (G20, G80, G28) 330 d Since 2019BMW 3 (G20, G80, G28) 330 d Mild-Hybrid Since 2020BMW 3 (G20, G80, G28) 330 d Mild-Hybrid xDrive Since 2020BMW 3 (G20, G80, G28) 330 d xDrive Since 2019BMW 3 (G20, G80, G28) 330 e Plug-in Hybrid Since 2019BMW 3 (G20, G80, G28) 330 e Plug-in Hybrid xDrive Since 2020BMW 3 (G20, G80, G28) 330 i Since 2018BMW 3 (G20, G80, G28) 330 i xDrive Since 2018BMW 3 (G20, G80, G28) M 340 i xDrive Since 2019BMW 3 (G20, G80, G28) M340 d Mild-Hybrid xDrive Since 2020

€1,730.00*

Front lip Carbon | fits BMW 5 Series incl. M550i/M550d (G30/G31) | 3DDesign

A revolution in carbon fibre. The front lip from 3DDesign for the G30 turns your 5 Series into a completely new car. The dedication and professionalism in the design and finish ensures an expressive and highly individualised look. Compatible vehicles:BMW 5 (G30, F90) 518 d 2018-2020BMW 5 (G30, F90) 520 d 2016-2023BMW 5 (G30, F90) 520 d xDrive 2016-2023BMW 5 (G30, F90) 520 i 2017-2020BMW 5 (G30, F90) 525 d 2017-2019BMW 5 (G30, F90) 530 d 2016-2020BMW 5 (G30, F90) 530 d xDrive 2016-2020BMW 5 (G30, F90) 530 d xDrive 2016-2020BMW 5 (G30, F90) 530 e Plug-in Hybrid 2017-2020BMW 5 (G30, F90) 530 e Plug-in Hybrid xDrive 2017-2023BMW 5 (G30, F90) 530 i 2016-2020BMW 5 (G30, F90) 530 i xDrive 2016-2023BMW 5 (G30, F90) 540 d xDrive 2017-2020BMW 5 (G30, F90) 540 i 2016-2020BMW 5 (G30, F90) 540 i xDrive 2016-2020BMW 5 (G30, F90) M 550 i xDrive 2017-2019BMW 5 Touring (G31) 518 d 2018-2020BMW 5 Touring (G31) 520 d since 2017BMW 5 Touring (G31) 520 d xDrive Since 2017BMW 5 Touring (G31) 520 i 2017-2020BMW 5 Touring (G31) 525 d 2017-2019BMW 5 Touring (G31) 530 d 2017-2020BMW 5 Touring (G31) 530 d xDrive 2017-2020BMW 5 Touring (G31) 530 i 2017-2020BMW 5 Touring (G31) 530 i xDrive 2017-2020BMW 5 Touring (G31) 540 d xDrive 2017-2020BMW 5 Touring (G31) 540 i xDrive 2017-2020BMW 5 Touring (G31) M 550 d xDrive since 2017BMW 5 Touring Van (G31) 520 d 2017-2018BMW 5 Touring Van (G31) 520 d xDrive 2017-2018BMW 5 Touring Van (G31) 520 i Since 2017BMW 5 Touring Van (G31) 530 d Since 2017BMW 5 Touring Van (G31) 530 d xDrive Since 2017BMW 5 Touring Van (G31) 530 i Since 2017BMW 5 Touring Van (G31) 530 i xDrive Since 2017BMW 5 Touring Van (G31) 540 d xDrive Since 2017BMW 5 Touring Van (G31) 540 i xDrive Since 2017

€1,730.00*