Front bumper insert OEM Carbon | fits BMW M2 (G87) S58 | Aulitzky Tuning

Facts: Power increase: 17-25hp, 11-20ft-lb Brand: Eventuri Material: Carbon fibre Installation: like original part (exchange) Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) The Eventuri intake is designed to provide the turbo with a less restrictive flow path while maintaining low inlet temperatures. Heat and volume are the most important considerations when designing an intake system for turbocharged engines. On the G29, the intake system is located next to the exhaust manifold, which quickly heats up the engine bay with heat. High temperatures are detrimental to engine performance as the turbo would have to be charged with heated, less dense air, so the only way to minimise IATs is to have a fully closed intake. However, this results in a restriction with only one air intake from which air is drawn. During development, we noticed an additional opening in the wheel arch area and utilised this by adding an additional inlet in our air box. In addition, our sealed airbox also features a gold reflective heat shield to minimise radiant heat transfer from the exhaust manifold. To maximise volume, we have made the airbox as large as possible with a recess for potential strut bracing. The standard folded intake pipe has been replaced with a smooth carbon pipe, which also has a larger internal volume with an initial internal diameter of 111 mm (4.4?) and tapers smoothly to match the turbo inlet. The pipe provides a smooth path from the filter to the turbo inlet. Finally, we use a customised high flow dry filter that has been ISO tested for filtration performance and has a larger filter area than the standard filter. Dyno testing Our intake for the G29 was independently tested by AMS on a Supra (same engine) with downpipe and software. The tests were repeated on the same day, with only the airbox being replaced for our intake. As you can see, there is an increase in power for a large part of the rev range, with some areas showing an increase of over 20bhp. This is the result of derestricting the intake path whilst maintaining low intake temperatures by keeping a fully sealed system. A further dyno test was carried out in the UK by Evolve Automotive with a downpipe and Stage 2 software tuning. This dyno graph shows the difference between a fully stock Supra and then with the stock airbox, downpipe and stage 2 tune and finally with the Eventuri, downpipe and stage 2 tune a maximum power gain of 25bhp. All runs were carried out with the bonnet closed. Each intake system consists of: Carbon fibre airbox with dual feed Customised dry cone filter with high flow rate Carbon fibre inlet pipe with 111 mm orifice ID CNC machined temperature sensor bracket CNC machined vent adapter Heat shield with reflective gold backing Laser-cut stainless steel brackets Silicon coupler with clamps to OEM specification Parts certificate The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT BMW M240i e1*2018/858*00123*.. DE/AT BMW M240i xDrive e1*2018/858*00123*.. DE/AT BMW M340i e1*2007/46*1947*.. DE/AT BMW M340i e1*2007/46*2017*.. DE/AT BMW M340i xDrive e1*2007/46*1947*.. DE/AT BMW M340i xDrive e1*2007/46*2017*.. DE/AT BMW M440i xDrive e1*2007/46*2126*.. DE/AT BMW Z4 M40i e1*2007/46*1949*.. DE/AT Toyota Supra e1*2007/46*1982*.. Compatible vehicles: VehicleTypePower outputEngine capacityEngineYear of constructionBMW Z4 (G29)M40i OPF250kW / 340hp2998cm³B58 B30 C11.18 -

Facts: Material: CarbonManufacturer: Eventuri Expert opinion: Material expertise Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeBaujahr BMW 5er (F10)M5412kW / 560hp4395cm³S63 B44 B09.11 - 10.16

The Competition Intercooler Kit fits the following model:Hyundai I20 N 150KW/204hp (2021-) Discover the ultimate performance upgrade for your Hyundai i20 N with the brand new Wagner Tuning high-performance intercooler - now with parts certificate! This intercooler convinces with a new type of competition mesh (Tube Fin) and the impressive dimensions of 580 mm x 181 mm x 70 mm + 580 mm x 120 mm x 80 mm (stepped mesh: 12.9 litres), which is specially tailored to the requirements of the Hyundai i20 N. With a staggering 46% larger flow area and 98% larger mesh volume compared to the original intercooler, this high-performance mesh sets new standards. The high-quality cast aluminium end boxes have been optimised using CAD design and CFD simulations to ensure ideal internal airflow. The result is outstanding cooling properties with minimal back pressure. In addition, the innovative high performance mesh ensures sufficient airflow to neighbouring components such as the water cooler through the use of a custom-made air baffle. This kit is the perfect choice for racing and ensures optimum cooling of the supercharged air with a significant increase in performance. Thanks to the anti-corrosion coating with excellent heat conduction properties, the Wagner Tuning intercooler remains unaffected by any environmental influences. This ensures a long-lasting and optimum cooling effect. It can be easily fitted to the original mounting points and is child's play thanks to the plug-and-play system. As with all our products, this intercooler is subject to strict quality control to ensure the highest standards. With an impressive inlet and outlet diameter of Ø65mm, this intercooler allows for optimal flow and contributes to an impressive performance increase of your Hyundai i20 N. Experience the power of innovation and dominate the road with unrivalled performance. Advantages of the Wagner Tuning intercooler:- improved airflow- 46% larger inflow area- 98% larger mesh volume- Flow-optimised air routing- Minimal back pressure OEM intercooler:V = 6.5 LITRESA = 720 cm² Wagner Tuning intercooler:V = 12.9 LITRES (+98%)A = 1050 cm² (+46%)G = 8.5kg Scope of delivery:1 intercooler2 silicone hoses4 hose clamps HD1 parts certificate + installation instructions With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

Facts:- Plug & Play installation using illustrated installation instructions- Special wiring harness for your vehicle- High-quality electronics “Made In Germany”- Electronic components with product qualification for motor vehicles according to AEC-Q100 installed- Support from us as co-developer and manufacturer Scope of delivery:The scope of delivery includes the motorsport add-on module, an engine-specific wiring harness, illustrated installation instructions in DE/EN and a BYPASS connector, which you can use to restore your vehicle to series production. Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeYear of constructionBMW 3er (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 -BMW 3er (G80/G81)M3 Competition / xDrive375kW / 510hp2993cm³S58 B30 A05.21 -BMW 4er (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 -BMW 4er (G82/G83)M4 Competition / xDrive375kW / 510hp2993cm³S58 B30 A05.21 - LEGAL INFORMATION: THE INSTALLATION OF ADDITIONAL ELECTRONICS IS A STRUCTURAL MODIFICATION TO THE MANUFACTURER'S ELECTRONICS. WITHOUT REGISTRATION IN THE VEHICLE DOCUMENTS BY MEANS OF AN INDIVIDUAL CERTIFICATE FROM TÜV; DEKRA OR OTHER RECOGNIZED TESTING INSTITUTES, THE INSTALLATION WILL INVALIDATE THE OPERATING LICENSE. IF USED ON PUBLIC ROADS, THIS WILL RESULT IN THE LOSS OF INSURANCE COVER. WE DO NOT CURRENTLY HAVE A PARTS CERTIFICATE FOR YOUR VEHICLE. THEREFORE, THIS SYSTEM IS EXCLUSIVELY SUITABLE FOR MOTORSPORT. ATTENTION: IF YOU USE THE ADDITIONAL ELECTRONICS, YOU MAY LOSE YOUR WARRANTY CLAIMS AGAINST THE SELLER OR WARRANTY CLAIMS AGAINST THE MANUFACTURER. IF YOU HAVE ANY FURTHER QUESTIONS, PLEASE DO NOT HESITATE TO CONTACT US!

H&R lowering springs for G80 2020-, only with adaptive damping VA30/HA10mm H&R sports spring kits are the ideal solution if you want to optimize the handling of your vehicle and achieve a sporty look while retaining the standard ride comfort. Details:Lowering VA: 30mmLowering HA: 10mmAxle load front: up to 1080 kgRear axle load: up to 1180 kgChassis: for vehicles with electric damper controlType of approval: with general operating permit (ABE) Product benefits:Sporty look and performanceLowering of the vehicle's center of gravityLinear or progressive suspension characteristicsCan be combined with standard or retrofit dampersOptimized driving dynamicsSurface protection through powder coatingMade in Germany Compatible vehicles:BMW M3 (G80) incl. Competition from 2020, only with adaptive M suspension