A powerful brake is one of the most important components in motorsport. With these upgrade kits, the necessary balance of performance, weight and durability has been perfectly combined through the uncompromising selection of materials, so that this product can meet the high demands of extreme automotive applications. To achieve this, MOV'IT has increased the diameter and thickness of the brake discs and used more cross holes. Each pre-cast hole is re-drilled and countersunk to achieve a more favourable flow. The brake disc's optimised DDE ventilation system has an 80% larger surface area compared to other brake discs, resulting in a significant reduction in temperature and wear. Attention: The conversion means that only rims with at least 19 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. Bundle Street 1: - Upgrade kit front axle, 382mm, 2-piece disc, perforated - incl. parts certificate Bundle Street 2 (+ sports / comfort brake pads): - Upgrade kit front axle, 382mm, 2-piece disc, perforated - MOVIT sports or comfort brake pads - incl. parts certificate Street 3 bundle (+ sports / comfort brake pads + steel flex lines): - Upgrade kit front axle, 382mm, 2-piece disc, perforated - MOVIT sports or comfort brake pads - Steel flex lines for front and rear axle - incl. parts certificate Details:MOVIT steel brake discs, 2-piece- Highly efficient DDE cooling system- Maximum fading protection- Double, directional ventilation- Perforated for optimum response behaviour even on wet roads- Special alloy for high thermal conductivityMOVIT sports brake pads, front axle- For the original brake caliper- Optimally compatible with MOVIT brake discs- Enlarged friction surface- Even heat transfer- Longer service life- With road approval- Low noise development- Lower system temperature for the perfect coefficient of frictionMOVIT comfort brake pads, front axle- Enlarged friction surface- Even heat transfer- Lower system temperature- Longer service lifeMOVIT steel flex lines, front and rear axle- Better response behaviour of the brake system- Durable quality (does not become porous and therefore does not leak)- Brake line does not expand under pressure- Harder and more constant pressure point- Improved modulation Scope of delivery: - 2x brake disc perforated left/right incl. brake pot - 1x mounting material - 1x installation instructions and running-in instructions - 1x parts certificate - 2x sports / comfort brake pad (only bundle 2+3) - 2x steel flex lines VA + HA (only bundle 3) Compatible vehicles:Audi A3 (8Y) RS3 quattro 294kW / 400PS / 2480cm³Audi A3 (8Y) RS3 quattro 299kW / 407PS / 2480cm³Audi Q3 (F3) RSQ3 quattro 294kW / 400PS / 2480cm³Cupra Formentor (KM7) VZ5 2.5 TSI 287kW / 390PS / 2480cm³ / 4Drive Notes:When installing the upgrade kit, we always recommend replacing the brake pads, as the use of used pads on new brake discs is not recommended.When installed in our factory, the conversion is carried out exclusively with new brake pads!

A powerful brake is one of the most important components in motorsport. With these upgrade kits, the necessary balance of performance, weight and durability has been perfectly combined through the uncompromising selection of materials, so that this product can meet the high demands of extreme automotive applications. To achieve this, MOV'IT has increased the diameter and thickness of the brake discs and used more cross holes. Each pre-cast hole is re-drilled and countersunk to achieve a more favourable flow. The brake disc's optimised DDE ventilation system has an 80% larger surface area compared to other brake discs, resulting in a significant reduction in temperature and wear. Attention: The conversion means that only rims with at least 19 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. Bundle Street 1: - Upgrade kit front axle, 382mm, 2-piece disc, slotted - incl. parts certificate Bundle Street 2 (+ sports / comfort brake pads): - Upgrade kit front axle, 382mm, 2-piece disc, slotted - MOVIT sports or comfort brake pads - incl. parts certificate Street 3 bundle (+ sports / comfort brake pads + steel flex lines): - Upgrade kit front axle, 382mm, 2-piece disc, slotted - MOVIT sports or comfort brake pads - Steel flex lines for front and rear axle - incl. parts certificate Details:MOVIT steel brake discs, 2-piece- Highly efficient DDE cooling system- Maximum fading protection- Double, directional ventilation- Perforated for optimum response behaviour even on wet roads- Special alloy for high thermal conductivityMOVIT sports brake pads, front axle- For the original brake caliper- Optimally compatible with MOVIT brake discs- Enlarged friction surface- Even heat transfer- Longer service life- With road approval- Low noise development- Lower system temperature for the perfect coefficient of frictionMOVIT comfort brake pads, front axle- Enlarged friction surface- Even heat transfer- Lower system temperature- Longer service lifeMOVIT steel flex lines, front and rear axle- Better response behaviour of the brake system- Durable quality (does not become porous and therefore does not leak)- Brake line does not expand under pressure- Harder and more constant pressure point- Improved modulation Scope of delivery: - 2x brake disc slotted left/right incl. brake pot - 1x mounting material - 1x installation instructions and running-in instructions - 1x parts certificate - 2x sports / comfort brake pad (only bundle 2+3) - 2x steel flex lines VA + HA (only bundle 3) Compatible vehicles:Audi A3 (8Y) RS3 quattro 294kW / 400PS / 2480cm³Audi A3 (8Y) RS3 quattro 299kW / 407PS / 2480cm³Audi Q3 (F3) RSQ3 quattro 294kW / 400PS / 2480cm³Cupra Formentor (KM7) VZ5 2.5 TSI 287kW / 390PS / 2480cm³ / 4Drive Notes:When installing the upgrade kit, we always recommend replacing the brake pads, as the use of used pads on new brake discs is not recommended.When installed in our factory, the conversion is carried out exclusively with new brake pads!

The Wagner Tuning Competition Intercooler Kit EVO 1 for Audi RS3 8V / 8Y and TTRS 8S is suitable for:Audi RS3 8V Sportback 270KW/367PS 04/2015-04/2016Audi RS3 8V Sportback/Sedan 294KW/400PS 08/2017+Audi RS3 8Y Sportback/Sedan 294KW/400PS 2021+Audi TTRS 8S 294KW/400PS 11/2016+Audi RSQ3 F3 294KW/400PS 10/2019+Ready to give your Audi RS3 8V an impressive performance boost? The Competition high performance intercooler kit EVO1 is the answer you've been waiting for. With state-of-the-art technology and a customised design, this kit ensures an exciting driving experience. This high performance intercooler redefines performance. With mesh dimensions of 660mmx180mmx110mm and a mesh volume of 13,070 cm³, it offers an impressive 14% larger flow area and an astonishing 57% more charge air volume compared to the standard intercooler. The result? An explosive increase in performance and exceptional cooling capacity. Our intercooler is equipped with a high-quality Tube Fin mesh that uses internal turbulators to optimise airflow. Despite its impressive size, this cooler weighs just 8.3kg, meaning you get more power without the extra weight. Our cast aluminium end boxes were developed in the CAD system and optimised with flow analyses in the CFD system to perfect the internal airflow. The result is excellent cooling properties with minimal back pressure. Our kit is a completely ready-to-install package that allows for easy replacement of the standard intercooler - a true plug-and-play experience. No complex adjustments required. All our intercoolers are equipped with an anti-corrosion coating that not only protects against environmental influences, but also offers excellent heat conduction properties. This ensures constant and optimum cooling performance, accompanied by a significant increase in performance. Our product has been tested to withstand pressures of up to 6 bar in order to offer you reliability at the highest level. Quality is our top priority. All our products are subject to rigorous quality control to ensure they meet the highest standards. Designed specifically for racing, this kit offers the performance and reliability you need to excel on the track. Realise your performance dreams with the Competition high performance intercooler kit EVO1. Get the most out of your Audi RS3 8V now and experience a new dimension of driving pleasure! Advantages of the Wagner Tuning intercooler:- improved cooling performance- 14 % larger inflow area- 57 % more charge air volume- flow-optimised- Plug & Play Dimensions original intercooler:640mm x 163mm x 80mmV=8.3 litresA=1043 cm² Wagner Tuning intercooler dimensions:660mm x 180mm x 110mmV=13.07 litresA=1188 cm² Scope of delivery:1 intercooler (black coated)1 assembly instruction Attention: Not authorised in the area of the StVZO.

The Wagner Tuning Competition Intercooler Kit EVO3 is suitable for:Audi RSQ3 F3 294KW/400PS 10/2019+ Improve the performance of your vehicle with Wagner Tuning high performance intercooler! Our high-performance intercooler sets new standards and takes your driving dynamics to a new level. With the impressive net dimensions of 515mm x 367mm x 95mm (stepped) and a total volume of 16,500 cm³, it offers an incredible flow area that is 84% larger than the standard intercooler. This means an astonishing 101% increase in charge air volume. Our newly developed competition high performance mesh ensures optimal airflow to neighbouring components such as the water cooler. With its high quality Tube Fin mesh and internal turbulators, it ensures efficient cooling. The cast aluminium end boxes have been optimised using flow analyses in the CFD system to ensure the best cooling properties with minimum back pressure. The integrated air baffles in the inlet ensure that the charge air cooler is filled evenly. This kit has been specially developed for racing and offers optimum cooling of the supercharged air with a significant increase in performance. All our intercoolers are equipped with a high-quality anti-corrosion coating with excellent heat conduction properties. This ensures a long-lasting and optimum cooling effect. Despite its high performance, our intercooler is amazingly light thanks to the new Competition high-performance mesh and forms a stable unit with the original crossmember. The total weight is only 11.7 kg. Installation is effortless at the original mounting points and is supported by our detailed installation instructions. Thanks to the high pressure stability, which has been tested up to 6 bar, you can rely on the reliability of our product. Quality is our top priority, which is why all our products are subject to continuous quality monitoring. The advantages at a glance:- Impressive increase in performance for your vehicle- Larger inflow area for optimum cooling performance- High-quality competition high-performance mesh with internal turbulators- Lightweight with high stability- Easy installation at the original mounting points- Excellent heat dissipation thanks to anti-corrosion coating- Tested and pressure-resistant up to 6 bar Take your vehicle's performance to the next level with our high-performance intercooler. Enjoy optimum cooling and impressive performance at every race! OEM intercooler:Cooling surface 1024cm² / charge air volume 8.2LInlet and outlet Ø68mm Wagner Tuning EVO 3 Competition:Cooling surface 1890cm² / charge air volume 16.5LInlet and outlet Ø68mm Scope of delivery:1 intercooler together with the crossbar1 mounting material Attention: Not authorised in the area of the StVZO.

Material: Carbon Manufacturer: Eventuri Parts certificate: Material certificate Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine type Audi A3 (8V)RS3 quattro294kW / 400hp2480cm³DAZA, DNWA Audi A3 (8Y)RS3 quattro294kW / 400hp2480cm³DNWC Audi TT (8J1/8S)TTRS quattro294kW / 400hp2480cm³DAZA, DNWA Audi Q3 (F3) 2019+RSQ3 quattro294kW / 400hp2480cm³DAZA, DNWA Cupra Formentor (KM)VZ5 4Drive287kW / 390hp2480cm³DNWB

Facts: Power increase (RS3 with series turbo): 15-18hp, 19-23ft-lb Power increase (RS3 with hybrid turbo): 25-30hp, 20-24ft-lb Flow dyno data: Standard intake 530 CFM: Eventuri intake 840 CFM Material: Carbon fibre Manufacturer: Eventuri Parts certificate: Approval is available for this product for certain regions and vehicles (details below) Suitable for: F3 RSQ3, RSQ3 Fastback 2019+ Originally developed for the RS3 platform, we now also offer this intake for the RSQ3. This intake system has been developed to provide the highest possible flow rate while allowing the lowest possible intake temperatures. Each component has been designed to provide the turbo with a smooth and clear flow path. The intake tube has an internal diameter of 103mm or just over 4? and has a smooth bend from the filter housing to the turbo inlet. The filter itself has been specifically designed for this inlet and has a huge outer diameter of 210mm or 8.3? with a filter area of over 130,000mm^2. The patented Venturi housing has been designed to provide the maximum possible internal volume for the RSQ3 engine bay and provides laminar flow to the turbo pipe. Finally, the duct seals the filter opening at the windscreen, but is not restricted by the standard intake alone. We have raised the front of the duct to now create an additional opening behind the bonnet, which corresponds to an additional 7? diameter hole from which the intake manifold can be removed. The resulting system has the ability to flow 840 CFM at 28? H2O while keeping intake temperatures to a minimum with the sealed design. The Eventuri difference The F3 RSQ3 Eventuri system uses our patented carbon fibre housings that provide an aerodynamically efficient airflow path from the filter to the turbocharger pipe. Not just another cone filter with a heat shield, but a unique design that creates the Venturi effect. Flow bench tests We conducted flow tests with a Superflow SF-1020 to measure the maximum possible flow rate at a pressure drop of 28" H2O. The tests were performed on the same day under controlled conditions using the same test fixture for each system. We tested our complete intake system against the stock airbox system. The results show how restrictive the stock airbox is, which we were able to improve by up to 58% in maximum possible flow rate. Importantly, this was achieved with a sealed intake system so that intake temperatures are also kept to a minimum. Testing on the test bench Our Stage 3 intake has been tested by various renowned tuners worldwide who have built high performance RS3/TTRS projects for road and track use. The first results come from BR Performance Netherlands, who tested our system on a TTRS with a TTE700 hybrid turbo. The tests were carried out on the same day with the bonnet closed. They tested the stock airbox against our stage 3 intake and also with the addition of our 4" turbo inlet pipe, which is an additional product - details can be found on our Audi product page. Summary of the Dyno results: Standard airbox with modified standard turbo inlet for TTE700 = 576.5 hp Eventuri stage 3 intake with modified standard turbo inlet for TTE700 = 606.5 hp Eventuri stage 3 intake with Eventuri turbo inlet for TTE700 = 620.8 hp Parts certificate The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT Audi RS3 e1*xx/xx*0608*06 DE/AT Audi RS3 (8V) from e1*xx/xx*0608*06 DE/AT Audi RS3 (8V) e1*2007/46*0608*08 DE/AT Audi RS3 (8Y) e1*2007/xx*2144*.. DE/AT Audi RSQ3 (F3) e1*xx/xx*2038*.. DE/AT Audi TTRS (8J) e1*xx/xx*1686*.. DE/AT Cupra Formentor VZ5 e9*xx/xx*4008*.. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine type Audi Q3 (F3) 2019+RSQ3 quattro294kW / 400hp2480cm³DAZA, DNWA