The competition package for the Audi RS4 B9 consists of the intercooler upgrade kit and the water cooler upgrade kit. Suitable for the following models: Audi RS4 B9 331KW/450hp from 2017 Audi RS5 F5 331KW/450hp from 2017 The intercooler upgrade kit: The 2.9 litre V6 biturbo engine (VW EA839) of the Audi RS4 models is equipped with an indirect charge air cooling circuit. The charge air cooling process is therefore realised by a water-cooled charge air cooler, which is replaced by the WagnerTuning high-performance charge air cooler. The WAGNERTUNING high-performance intercooler has a new type of performance mesh with dimensions of 222 mm x 200 mm x 120 mm. This was specially developed for the high demands of the RS4/RS5 engine and offers 185% more external mesh volume compared to the original intercooler. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time enables the best possible internal air flow. The cast aluminium end boxes were designed in CAD and optimised with the aid of CFD simulations. The result is excellent cooling properties with minimal back pressure. This kit is therefore also suitable for racing. Optimum cooling of the supercharged air with a significant increase in performance! All WAGNERTUNING intercoolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. Installation of the system is also uncomplicated and plug & play with the help of our installation instructions. Advantages of this product: - Significantly better cooling performance - Less back pressure - More power and torque for your engine - Mechanical relief of the turbocharger - 100% pressure resistance - 100% plug and play - Up to 4 years warrantyThe water cooler upgrade kit: The 2.9 litre V6 biturbo engine of the Audi RS4 / RS5 is equipped with an indirect charge air cooling circuit. This means that the charge air cooling process is not realised using the ambient air as a cooling medium (as usual), but with the help of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water cooler come into play. The newly developed competition racing mesh of the WAGNERTUNING high-performance water cooler increases the radiator volume of the standard water cooler by a total of 55%. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the neighbouring components (e.g. the engine water cooler behind it) sufficient airflow for heat exchange. Furthermore, the water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. Installation of the system is also straightforward and plug & play with the help of our installation instructions. Scope of delivery: 1x frontal water cooler (low-temperature circuit) 1x set of water hoses 1x assembly material 1x installation instructions Attention: Not approved in the area of the StVZO.

The Wagner Tuning Competition water cooler kit for the Audi S8 D4 is suitable for the following vehicles:Audi S8 D4 Plus 605hp/445KW 09/2015-09/2017Audi S8 D4 520hp/382KW 04/2012-09/2017Audi 4.0 TFSI D4 435hp/320KW 09/2013-09/2017 Experience the full performance of your Audi S8 with the Competition Water Cooler Kit from Wagner Tuning. The 4.0L V8 biturbo engine of the Audi S8 models has an innovative indirect charge air cooling circuit. Instead of using ambient air, the charge air is cooled with a special cooling water circuit. By lowering the cooling water temperature, the performance of the engine is directly increased, and this is precisely where the Wagner Tuning additional water cooler kit comes in. Our newly developed competition racing mesh increases the radiator volume of the standard water cooler by an astonishing 66%. The unique ratio between the inner and outer cooling surface enables maximum heat transfer and ensures sufficient airflow for neighbouring components for efficient heat dissipation. In addition, our water coolers are equipped with a thermally conductive anti-corrosion coating that ensures a long-term cooling effect. Installation of the system is simple and straightforward thanks to our detailed installation instructions. Benefit from an improved cooling circuit and experience optimised performance from your Audi S8.Advantages:-Expands the radiator volume of the standard water cooler by 66%-Unique ratio between inner and outer cooling surface for maximum heat transfer-Heat-conducting anti-corrosion coating for long-term cooling effect-Easy plug-and-play installation Maximise your driving experience with the Competition water cooler kit from Wagner Tuning. Scope of delivery:1x additional water cooler incl. silicone hoses and installation material Attention: Not authorised in the area of the StVZO.

The competition water cooler kit is suitable for the following models:Audi RS6 C7 412KW/560hp 2013-2018Audi RS6 C7 Performance 445KW/605hp 2015-2018Audi RS7 C7 412KW/560hp 2013-2017Audi RS7 C7 Performance 445KW/605hp 2015-2017 Optimise the cooling performance of your Audi RS6 / RS7 C7 with our competition water cooler kit. The 4.0L V8 bi-turbo engine of the Audi RS6 and RS7 models is equipped with an indirect charge air cooling circuit. The charge air cooling process is therefore not realised with ambient air as usual, but with a separate cooling water circuit. A reduction in the cooling water temperature leads directly to an improved cooling performance of the charge air. This is where the advantages of our Wagner Tuning auxiliary water cooler come into play. Our newly developed competition racing mesh increases the radiator volume of the standard water cooler by an impressive 102%. The ratio between the inner and outer cooling surface ensures maximum heat transfer and at the same time allows sufficient airflow for neighbouring components such as the engine water cooler. The water coolers are also equipped with a thermally conductive anti-corrosion coating, which ensures a long-term cooling effect. Installation of the system is straightforward and plug-and-play thanks to our installation instructions. Prepare your Audi RS6 / RS7 C7 for maximum performance and optimise its cooling system with our competition water cooler kit. Attention: Not authorised in the area of the StVZO.

The Wagner Tuning Competition water cooler kit is suitable for:Audi S4 B8 245KW/333PS 11/2008 - 06/2015 SedanAudi S4 B8 245KW/333PS 11/2008 - 06/2015 AvantAudi S5 8T 245KW/333PS 08/2011 - 07/2016 CoupeAudi S5 8T 245KW/333PS 03/2009 - 03/2017 CabrioletAudi S5 8T 245KW/333PS 11/2009 - 09/2016 Sportback Maximise the performance of your Audi S4/S5 with the Wagner Tuning additional water cooler kit. The 3.0L V6 supercharged engine of the Audi S4 and S5 models is a technical masterpiece. But even the best engines can benefit from optimisation. Our auxiliary water cooler kit is the solution for improved cooling performance and optimised efficiency. In contrast to conventional cooling with ambient air, our system utilises its own cooling water circuit. This enables a direct reduction in the cooling water temperature and leads to a noticeable improvement in the cooling performance of the charge air. Our new competition racing network increases the radiator volume of the standard water cooler by an impressive 92%. The intelligent ratio between the inner and outer cooling surface ensures maximum heat transfer. At the same time, sufficient airflow is ensured for heat exchange with neighbouring components. In addition, our water coolers are equipped with a thermally conductive anti-corrosion coating that ensures a long-lasting cooling effect. Installation of the system is straightforward and almost plug-and-play thanks to our detailed installation instructions. Increase the performance and reliability of your Audi S4/S5 with the Wagner Tuning additional water cooler kit. Scope of delivery:1x additional water cooler incl. silicone hoses and installation materialAttention: Not authorised in the area of the StVZO.

The competition water cooler kit is suitable for the following models:Audi S6 C7 309-331KW/420-450hp 2012-2018Audi S7 C7 309-331KW/420-450hp 2012-2018 Maximise the performance of your Audi S6 / S7 C7 with the Competition Water Cooler Kit from Wagner Tuning. The 4.0L V8 bi-turbo engine of the Audi S6 and S7 models is equipped with an innovative indirect charge air cooling circuit. In contrast to conventional systems, the charge air is not cooled with ambient air, but with its own cooling water circuit. The reduction of the cooling water temperature leads directly to an improved cooling performance of the charge air - and this is exactly where the Wagner Tuning additional water cooler kit comes in. Our newly developed competition racing mesh increases the radiator volume of the standard water cooler by an astonishing 92%. The unique ratio between the inner and outer cooling surface enables maximum heat transfer and ensures that neighbouring components receive sufficient airflow for their heat exchange. In addition, our water coolers are equipped with a thermally conductive anti-corrosion coating that ensures a long-term cooling effect. Installation of the system is simple and straightforward thanks to our detailed installation instructions. Enjoy the benefits of an improved cooling circuit and experience optimised performance from your Audi S6 / S7 C7. Ready to maximise your driving experience? Order the Competition Water Cooler Kit from Wagner Tuning today. Scope of delivery:1x additional water cooler incl. silicone hoses and mounting material Attention: Not authorised in the area of the StVZO.

The Wagner Tuning Competition water cooler kit is suitable for the following models:Mercedes G63 AMG W463 430KW/585PS (06/2018-06/2020)Mercedes G63 AMG W463 430KW/585PS (07/2020-) Boost the performance of your Mercedes G63 AMG:Rely on the proven quality and innovation of Wagner Tuning and upgrade your Mercedes G63 AMG with our Competition water cooler kit. Experience improved cooling performance and maximum efficiency for your vehicle.This specially developed kit significantly improves the cooling performance of your vehicle and ensures optimum performance of your 4.0L V8 biturbo engine. Innovative cooling technology:The 4.0L V8 biturbo engine of the Mercedes G63 AMG models utilises an indirect charge air cooling circuit, which works with its own cooling water circuit instead of ambient air. The Wagner Tuning auxiliary water coolers effectively reduce the cooling water temperature, which directly leads to an improved cooling performance of the charge air. Maximised cooling performance:The newly developed competition racing mesh of the Wagner Tuning high-performance water cooler increases the radiator volume of the standard water cooler by an impressive 48%. The optimum balance between the inner and outer cooling surface maximises heat transfer without compromising the airflow for neighbouring components such as the engine water cooler. Lasting efficiency:Our water coolers are coated with a thermally conductive anti-corrosion coating that ensures long-term cooling efficiency. This advanced coating protects against corrosion and ensures system longevity. Easy installation:The kit is designed for easy and hassle-free installation. Thanks to the detailed installation instructions, the system can be installed quickly and easily as a plug & play solution. Scope of delivery:2x additional water coolerSilicone hosesInstallation materialAttention: Not authorised in the area of the StVZO.

Suitable for the following vehicles:Mercedes Benz W176 A 45 AMG 265-280KW/360-381hp (2013-2018)Mercedes Benz C117 CLA 45 AMG 265-280KW/360-381hp (2013-2018)Mercedes Benz X156 GLA 45 AMG 265-280KW/360-381hp (2014-2019) The 2.0L M 133 turbo engine of the specified A-Class models from AMG is equipped with an indirect charge air cooling circuit. This means that the charge air is not cooled using the ambient air as a cooling medium (as usual), but with the aid of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water cooler come into play. The newly developed competition racing mesh of the WAGNERTUNING high-performance water cooler increases the radiator volume of the standard water cooler by 79%. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the adjacent components (e.g. the engine water cooler located behind it) sufficient air flow for heat exchange. Furthermore, the increased cooling water volume allows the entire system thermal to be kept at a lower level over a longer period of time. All WAGNERTUNING water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. Installation of the system is also uncomplicated and plug & play with the help of our installation instructions. OEM front cooler dimensions - WT front cooler dimensions:640 mm x 390 mm x 16 mm - 616 mm x 362 mm x 32 mmV = 3.99 liters - V = 7.14 litersA = 2496 cm² - A = 2230 cm² With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

Suitable for the following models:BMW F87 M2 Competition 302kW/411hpBMW F80 M3 317kW/431hpBMW F80 M3 Competition 331kW/450hpBMW F80 M3 CS 338kW/460hpBMW F82/F83 M4 317kW/431hpBMW F82/F83 M4 Competition 331kW/450hpBMW F82 M4 CS 338kW/460hpBMW F82 M4 GTS 368kW/500hp With parts certificate! The 3.0 liter S55B30 turbo engine is equipped with an indirect charge air cooling circuit. This means that the charge air is not cooled using the ambient air as a cooling medium (as usual), but with the aid of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water coolers come into play. The newly developed competition racing nets of the WAGNERTUNING high-performance water coolers increase the radiator volume of the standard water cooler by 89% for the front and 94% for the side. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the adjacent components (e.g. the engine water cooler located behind it) sufficient air flow for heat exchange. Furthermore, the increased cooling water volume allows the entire system thermal to be kept at a lower level over a longer period of time. All WAGNERTUNING water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. The installation of the system is also uncomplicated and plug & play with the help of our installation instructions. Dimensions OEM water cooler (frontal):590 mm x 308 mm x 25 mmV = 4.5 litersA = 1817 cm² WT water cooler dimensions (frontal):568 mm x 468.4 mm x 32 mmV = 8.5 liters (+89%)A = 2660.5 cm² (+46.4%) Scope of delivery:1x frontal water cooler (low-temperature circuit)1x installation instructions1x parts certificate With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

Suitable for the following vehicles:Mercedes Benz W205 C63 AMG 350KW/476hp (from 2015)Mercedes Benz W205 C63S AMG 375KW/510hp (from 2015) The 4.0L V8 biturbo engine of the C63 (S) models from AMG is equipped with an indirect charge air cooling circuit. This means that the charge air is not cooled using the ambient air as a cooling medium (as usual), but with the help of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water coolers come into play.The newly developed competition racing nets of the WAGNERTUNING high-performance water coolers increase the radiator volume of the standard water coolers by a total of 80 %. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the adjacent components (e.g. the engine water cooler behind it) sufficient air flow for heat exchange. Furthermore, the water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. Installation of the system is also uncomplicated and plug & play with the help of our installation instructions. Dimensions OEM front cooler:640 mm x 430 mm x 27 mmV = 7.43 litersA = 2752 cm² WT front cooler dimensions:645 mm x 395 mm x 52 mmV = 13.25 litersA = 2548 cm² Attention: Not approved in the area of the StVZO.

The Wagner Tuning Performance intercooler kit is suitable for the following vehicles:Audi S8 D4 Plus 605PS/445KW 09/2015-09/2017Audi S8 D4 520PS/382KW 04/2012-09/2017Audi 4.0 TFSI D4 420PS/309KW 04/2012-08/2013Audi 4.0 TFSI D4 435PS/320KW 09/2013-09/2017 Discover the new era of performance with the Wagner Tuning Performance intercooler, developed for Audi S8 models with the powerful 4.0L V8 biturbo engine. Experience an unrivalled combination of power, performance and dynamics. Our innovative intercooler has been specially developed for the demanding requirements of the Audi S8 models. It offers significantly improved cooling performance with up to 40°C cooler intake air temperatures, resulting in maximum mechanical and thermal relief for the turbocharger. With a high-quality cooling network that offers an additional 118% more external network volume compared to the charge air cooler fitted as standard, our charge air cooler sets new standards in terms of cooling performance. The ratio between the inner and outer cooling surface ensures maximum heat transfer and optimised internal airflow. CFD simulations were used to develop the end boxes from high-quality aluminium chill casting to ensure optimum air flow conditions. The result is outstanding cooling properties with minimal back pressure, which also makes this kit ideal for racing. Our intercooler is equipped with a thermally conductive anti-corrosion coating that ensures long-lasting durability. Installation of the complete kit is straightforward and plug-and-play thanks to our simple installation instructions. Benefit from the numerous advantages of the Wagner Tuning intercooler:- Significantly improved cooling performance with up to 40°C cooler intake air temperatures- 118 % more external mesh volume compared to the intercooler fitted as standard- Maximum mechanical and thermal relief of the turbocharger- More power and torque for your engine- 100% pressure resistance- Plug-and-play without modifications- 4x 1/8 NPT connections for measuring additional parameters Treat yourself to the ultimate performance upgrade for your Audi S8 and enjoy a driving experience that will thrill you. Opt for the Wagner Tuning Performance intercooler and take your vehicle to a new level of performance and dynamics. Suitable for all performance levels. Attention: Not authorised in the area of the StVZO.

The Performance Intercooler Upgrade Kit is suitable for the following vehicles:Mercedes W436 G63 AMG 430KW/585PS (M177) from 2018 Maximise the performance of your Mercedes-AMG M177 4.0 litre biturbo engine with the Wagner Tuning intercooler! Experience a revolution in performance with the ground-breaking Wagner Tuning intercooler. This innovative upgrade catapults your performance to unprecedented heights and creates an unrivalled driving experience. Our state-of-the-art high-performance intercoolers take performance to an unprecedented level. With impressive mesh dimensions of 430 mm x 200 mm x 102 mm and a generous charge air volume of 8.8 litres, they reduce backpressure by an astonishing 34% compared to the standard intercooler. Thanks to the specially developed high-performance mesh, the cooling properties remain unrivalled even under extreme conditions. With a weight of just 12.6 kg per intercooler, we are setting new standards. The precisely CAD-designed free-form end boxes made of high-quality cast aluminium ensure optimum internal airflow and an impressive pressure resistance of up to 6 bar (tested). Our reinforced silicone hoses and aluminium charge air tube optimise flow characteristics, minimise back pressure and maximise your vehicle's performance. The high-quality anti-corrosion coating with excellent heat conduction properties guarantees long-lasting durability. Your cooling always remains at the optimum level and you benefit from a noticeable increase in performance that sets you apart from the competition. Our ready-to-install kit makes it easy to replace the standard intercooler - without any complex modifications. We know that every second counts on the racetrack. That's why all our products are subject to strict quality control. Are you ready to take racing to a new level? Choose the Competition intercooler and experience the power you deserve! Advantages of the Wagner Tuning intercooler:- improved cooling performance- 8.8 litres charge air volume (+72.5 %)- 34% less back pressure- Optimised air flow- Plug & Play OEM intercooler:2 x [200mm x 190mm x 67mm]V = 5.1 LITRES Wagner Tuning intercooler:1 x [430mm x 200mm x 102mm]V = 8.8 LITRES (+72.5%)34% less back pressureSignificantly better cooling performance Scope of delivery:1 intercooler2 silicone hoses1 mounting material1 assembly instruction Attention: Not authorised in the area of the StVZO.

Suitable for the following models:BMW F87 M2 Competition 302kW/411hp With parts certificate! The 3.0 liter S55B30 turbo engine is equipped with an indirect charge air cooling circuit. This means that the charge air is not cooled using the ambient air as a cooling medium (as usual), but with the aid of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water coolers come into play. The newly developed competition racing nets of the WAGNERTUNING high-performance water coolers increase the radiator volume of the standard water cooler by 89% for the front and 94% for the side. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the adjacent components (e.g. the engine water cooler located behind it) sufficient air flow for heat exchange. Furthermore, the increased cooling water volume allows the entire system thermal to be kept at a lower level over a longer period of time. All WAGNERTUNING water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. The installation of the system is also uncomplicated and almost plug & play with the help of our installation instructions. Dimensions OEM water cooler (side):250 mm x 165 mm x 40 mmV = 1.65 litersA = 412.5 cm² WT water cooler dimensions (side):252 mm x 188 mm x 68 mmV = 3.2 liters (+94%)A = 473.8 cm² (+14.9%) Scope of delivery:1x side water cooler (low-temperature circuit)1x carbon air duct for the side water cooler1x mounting material1x installation instructions1x parts certificate With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

Suitable for the following models:BMW F80 M3 317kW/431hpBMW F80 M3 Competition 331kW/450hpBMW F80 M3 CS 338kW/460hpBMW F82/F83 M4 317kW/431hpBMW F82/F83 M4 Competition 331kW/450hpBMW F82 M4 CS 338kW/460hpBMW F82 M4 GTS 368kW/500hp With parts certificate! The 3.0 liter S55B30 turbo engine is equipped with an indirect charge air cooling circuit. This means that the charge air is not cooled using the ambient air as a cooling medium (as usual), but with the aid of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water coolers come into play. The newly developed competition racing nets of the WAGNERTUNING high-performance water coolers increase the radiator volume of the standard water coolers by 89% for the front and 94% for the side. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the adjacent components (e.g. the engine water cooler located behind it) sufficient air flow for heat exchange. Furthermore, the increased cooling water volume allows the entire system thermal to be kept at a lower level over a longer period of time. All WAGNERTUNING water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. The installation of the system is also uncomplicated and plug & play with the help of our installation instructions. Dimensions OEM water cooler (side):250 mm x 165 mm x 40 mmV = 1.65 litersA = 412.5 cm² WT water cooler dimensions (side):252 mm x 188 mm x 68 mmV = 3.2 liters (+94%)A = 473.8 cm² (+14.9%) Scope of delivery:1x side water cooler (low-temperature circuit)1x carbon air duct for the side water cooler1x mounting material1x installation instructions1x parts certificate With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

Suitable for the following vehicles: Mercedes Benz W176 A 45 AMG 265-280KW/360-381hp (2013-2018) Mercedes Benz C117 CLA 45 AMG 265-280KW/360-381hp (2013-2018) Mercedes Benz X156 GLA 45 AMG 265-280KW/360-381hp (2014-2019) The 2.0L M 133 turbo engine of the specified A-Class models from AMG is equipped with an indirect charge air cooling circuit. This means that the charge air is not cooled using the ambient air as a cooling medium (as usual), but with the aid of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water cooler come into play. The newly developed competition racing mesh of the WAGNERTUNING high-performance water cooler increases the radiator volume of the standard water cooler by 77%. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the neighbouring components (e.g. the engine water cooler located behind it) sufficient airflow for heat exchange. Furthermore, the increased amount of cooling water can be used to keep the entire system thermal system at a lower level over a longer period of time. All WAGNERTUNING water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. The installation of the system is also uncomplicated and plug & play with the help of our installation instructions. with parts certificate! OEM side cooler dimensions - WT side cooler dimensions: 248 mm x 180 mm x 40 mm - 252 mm x 184 mm x 68 mm V = 1.79 litres - V = 3.15 litres A = 446 cm² - A = 464 cm²With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

Suitable for the following vehicles:Mercedes Benz W205 C63 AMG 350KW/476hp (from 2015)Mercedes Benz W205 C63S AMG 375KW/510hp (from 2015) The 4.0L V8 biturbo engine of the C63 (S) models from AMG is equipped with an indirect charge air cooling circuit. This means that the charge air is not cooled using the ambient air as a cooling medium (as usual), but with the help of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water coolers come into play.The newly developed competition racing nets of the WAGNERTUNING high-performance water coolers increase the radiator volume of the standard water coolers by a total of 80 %. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the adjacent components (e.g. the engine water cooler behind it) sufficient air flow for heat exchange. Furthermore, the water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. Installation of the system is also straightforward and plug & play with the help of our installation instructions. Dimensions OEM side cooler:240 mm x 250 mm x 27 mmV = 1.62 litersA = 600 cm² WT side cooler dimensions:240 mm x 240 mm x 52 mmV = 3.00 litersA = 576 cm² Attention: Not approved in the area of the StVZO.

Suitable for the following vehicles: Mercedes Benz W213/S213 E63 AMG 420KW/571hp (from 2017) Mercedes Benz W213/S213 E63S AMG 450KW/612hp (from 2017) The 4.0L V8 biturbo engine of the E63 (S) models from AMG is equipped with an indirect charge air cooling circuit. This means that the charge air cooling process is not realised using the ambient air as a cooling medium (as usual), but with the help of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water cooler come into play. The newly developed competition racing mesh of the WAGNERTUNING high-performance water cooler increases the radiator volume of the standard water cooler by a total of 210%. The ratio between the inner and outer cooling surface generates maximum heat transfer. Furthermore, the water cooler is equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. Installation of the system is also straightforward and plug & play with the help of our installation instructions. OEM side cooler dimensions: 260 mm x 213 mm x 32 mm V = 1.77 litres A = 553 cm² WT side cooler dimensions: 264 mm x 242 mm x 86 mm V = 5.5 litres (+210%) A = 638 cm² (+15%) Attention: Not approved in the area of the StVZO.

The upgrade engine water cooler kit is suitable for the: Audi RS3 8V Sportback/Sedan 294KW/400PS 07/2021+ Optimise the performance of your Audi RS3 8Y with the upgrade of the side-mounted engine water cooler. Our side-mounted Wagner Tuning water coolers are designed to directly replace the standard water coolers of your vehicle. By maximising the available installation space, we have been able to increase the size of the water coolers by an astonishing 132%. This significant increase in size, combined with the excellent thermal conductivity of our all-aluminium water radiators, offers significantly improved cooling efficiency. This is particularly suitable for vehicles that are heavily used on the racetrack or that require additional performance modifications. Our complete kit covers both the driver and passenger side and comes with additional brackets to ensure a smooth installation. Prepare your Audi RS3 8Y for peak performance and optimise its cooling system with our high-quality side engine water coolers. OEM water cooler dimensions:200 mm x 230 mm x 44 mmV = 1.84 litresA = 460 cm² Wagner Tuning water cooler dimensions:205 mm x 242 mm x 86 mmV = 4.27 litres (+132%)A = 496 cm² (+8%) Attention: Not authorised in the area of the StVZO.

Plug and Play suitable for the following models: Audi RS4 B9 331KW/450hp from 2017 Audi RS5 F5 331KW/450hp from 2017 The 2.9L V6 biturbo engine of the Audi RS4 / RS5 is equipped with an indirect charge air cooling circuit. This means that the charge air cooling process is not realised using the ambient air as a cooling medium (as usual), but with the help of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water cooler come into play. The newly developed competition racing mesh of the WAGNERTUNING high-performance water cooler increases the radiator volume of the standard water cooler by a total of 55%. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the neighbouring components (e.g. the engine water cooler behind it) sufficient airflow for heat exchange. Furthermore, the water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. Installation of the system is also uncomplicated and plug & play with the help of our installation instructions. OEM water cooler dimensions: 720 mm x 485 mm x 25 mm V = 8.73 litres A = 3492 cm² WT water cooler dimensions: 690 mm x 490 mm x 40 mm V = 13.52 litres A = 3381 cm² Attention: Not approved in the area of the StVZO.

Plug and Play suitable for the following models with the B48 & B58.1 engine:BMW 1 Series F20/F21 LCI from 09/2015 - 120i, 125i, M140(x)iBMW 2 Series F22/F23 LCI from 09/2016 - 220i, 230i, M240iBMW 3 Series F30/F31/F34/F35 LCI from 09/2014 - 320i, 330i, 340iBMW 4 Series F32/F33/F36 LCI from 03/2016 - 420i, 430i, 440i The 2.0 liter B48B20 and 3.0 liter B58B30M0 turbo engine of the specified models is equipped with an indirect charge air cooling circuit. This means that the charge air is not cooled using the ambient air as a cooling medium (as usual), but by means of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water cooler come into play. The newly developed competition racing mesh of the WAGNERTUNING high-performance water cooler increases the radiator volume of the standard water cooler by 117%. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the adjacent components (e.g. the engine water cooler located behind it) sufficient air flow for heat exchange. Furthermore, the increased cooling water volume allows the entire system thermal to be kept at a lower level over a longer period of time. All WAGNER TUNING water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. Installation of the system is also uncomplicated and plug & play with the help of our installation instructions. OEM water cooler dimensions:576 mm x 495 mm x 27 mmV = 7.70 litersA = 2851 cm² WT water cooler dimensions:524 mm x 468 mm x 68 mmV = 16.70 litersA = 2454 cm²Attention: Not approved in the area of the StVZO.

Suitable for the following models:BMW F87 M2 Competition 302kW/411hp With parts certificate! The 3.0 liter S55B30 turbo engine is equipped with an indirect charge air cooling circuit. This means that the charge air is not cooled using the ambient air as a cooling medium (as usual), but with the aid of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water coolers come into play. The newly developed competition racing nets of the WAGNERTUNING high-performance water coolers increase the radiator volume of the standard water cooler by 89% for the front and 94% for the side. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the adjacent components (e.g. the engine water cooler located behind it) sufficient air flow for heat exchange. Furthermore, the increased cooling water volume allows the entire system thermal to be kept at a lower level over a longer period of time. All WAGNERTUNING water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. The installation of the system is also uncomplicated and almost plug & play with the help of our installation instructions. Dimensions OEM water cooler (front):590 mm x 308 mm x 25 mmV = 4.5 litersA = 1817 cm² WT water cooler dimensions (front):568 mm x 468.4 mm x 32 mmV = 8.5 liters (+89%)A = 2660.5 cm² (+46.4%) OEM water cooler dimensions (side):250 mm x 165 mm x 40 mmV = 1.65 litersA = 412.5 cm² WT water cooler dimensions (side):252 mm x 188 mm x 68 mmV = 3.2 liters (+94%)A = 473.8 cm² (+14.9%) Scope of delivery:1x front water cooler (low-temperature circuit)1x side water cooler (low-temperature circuit)1x carbon air duct for the side water cooler1x mounting material1x installation instructions1x parts certificate With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

Plug and Play suitable for the following models: BMW G87 M2 338kW/460hp from 2023+ BMW G80/81 M3 (Competition) 353-375KW/480-510hp from 2021+ BMW G82 M4 (Competition/CSL) 353-405KW/480-550hp from 2021+Now with parts certificate! The 3.0L R6 biturbo engine (S58) is equipped with an indirect charge air cooling circuit. This means that the charge air cooling process is not realised using the ambient air as a cooling medium (as usual), but with the help of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water cooler come into play. The newly developed competition racing mesh of the WAGNERTUNING high-performance water cooler increases the radiator volume of the standard water cooler by a total of 60 %. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the neighbouring components (e.g. the engine water cooler behind it) sufficient airflow for heat exchange. Furthermore, the water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. Installation of the system is also straightforward and plug & play with the help of our installation instructions. OEM water cooler dimensions: 505 mm x 605 mm x 30 mm V = 9.16 litres A = 3055 cm² WT water cooler dimensions: 505 mm x 605 mm x 48 mm V = 14.67 litres A = 3055 cm² With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

Suitable for the following models:BMW F80 M3 317kW/431hpBMW F80 M3 Competition 331kW/450hpBMW F80 M3 CS 338kW/460hpBMW F82/F83 M4 317kW/431hpBMW F82/F83 M4 Competition 331kW/450hpBMW F82 M4 CS 338kW/460hpBMW F82 M4 GTS 368kW/500PS With parts certificate! The 3.0 liter S55B30 turbo engine is equipped with an indirect charge air cooling circuit. This means that the charge air is not cooled using the ambient air as a cooling medium (as usual), but with the aid of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water coolers come into play. The newly developed competition racing nets of the WAGNERTUNING high-performance water coolers increase the radiator volume of the standard water coolers by 89% for the front and 94% for the side. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the adjacent components (e.g. the engine water cooler located behind it) sufficient air flow for heat exchange. Furthermore, the increased cooling water volume allows the entire system thermal to be kept at a lower level over a longer period of time. All WAGNERTUNING water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. The installation of the system is also uncomplicated and plug & play with the help of our installation instructions. OEM water cooler dimensions (front):590 mm x 308 mm x 25 mmV = 4.5 litersA = 1817 cm² WT water cooler dimensions (front):568 mm x 468.4 mm x 32 mmV = 8.5 liters (+89%)A = 2660.5 cm² (+46.4%) OEM water cooler dimensions (side):250 mm x 165 mm x 40 mmV = 1.65 litersA = 412.5 cm² WT water cooler dimensions (side):252 mm x 188 mm x 68 mmV = 3.2 liters (+94%)A = 473.8 cm² (+14.9%) Scope of delivery:1x front water cooler (low-temperature circuit)1x side water cooler (low-temperature circuit)1x carbon air duct for the side water cooler1x mounting material1x installation instructions1x parts certificate With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

The water cooler kit is suitable for the following models:BMW Z4 G29 20i 2.0L 145KW/197hp from 2019 (OPF model)BMW Z4 G29 30i 2.0L 190KW/258hp from 2019 (OPF model)BMW Z4 G29 M40i 3.0L 250KW/340hp from 2019 (OPF model)Toyota Supra MK5 A90 GR 2,0L 190KW/258hp from 2019 (OPF model)Toyota Supra MK5 A90 GR 3,0L 250KW/340hp from 2019 (OPF model) Get the best out of your turbo engine. Experience performance optimization with the Wagner Tuning Upgrade Water Cooler, specifically designed for the 2.0L Liter B48 and the 3.0 Liter B58 turbo engine. The specified models benefit from an advanced indirect charge air cooling circuit, which uses a special cooling water circuit to cool the charge air instead of the usual ambient air. A reduction in the cooling water temperature therefore means a direct improvement in the cooling performance of the charge air. The Wagner Tuning Upgrade water cooler impresses with its newly developed competition racing mesh, which increases the radiator volume of the standard water cooler by an impressive 117%. The optimized ratio between the inner and outer cooling surface ensures maximum heat transfer and at the same time allows sufficient air flow for adjacent components such as the engine water cooler. Due to the increased cooling water volume, the system thermals remain at a lower level over a longer period of time. Each Wagner Tuning water cooler is equipped with a thermally conductive anti-corrosion coating that ensures a long-lasting cooling effect. The installation of the system is uncomplicated and almost plug & play thanks to our user-friendly installation instructions. Take the performance of your turbo engine to the next level with the Wagner Tuning Upgrade water cooler. Dimensions OEM water cooler:576 mm x 495 mm x 27 mmV = 7.70 litersA = 2851 cm² Wagner Tuning water cooler dimensions:524 mm x 468 mm x 68 mmV = 16.70 litersA = 2454 cm²Attention: Not approved in the area of the StVZO.

Suitable for the following vehicles: Mercedes Benz W176 A 45 AMG 265-280KW/360-381hp (2013-2018) Mercedes Benz C117 CLA 45 AMG 265-280KW/360-381hp (2013-2018) Mercedes Benz X156 GLA 45 AMG 265-280KW/360-381hp (2014-2019) The 2.0L M 133 turbo engine of the specified A-Class models from AMG is equipped with an indirect charge air cooling circuit. This means that the charge air cooling process is not realised using the ambient air as a cooling medium (as usual), but with the help of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water coolers come into play. The newly developed competition racing nets of the WAGNERTUNING high-performance water coolers increase the radiator volume of the standard water coolers by a total of 78%. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the neighbouring components (e.g. the engine water cooler behind it) sufficient airflow for heat exchange. Furthermore, the water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. Installation of the system is also straightforward and plug & play with the help of our installation instructions. Now with parts certificate! OEM front radiator dimensions: 640 mm x 390 mm x 16 mm V = 3.99 litres A = 2496 cm² WT front radiator dimensions: 616 mm x 362 mm x 32 mm V = 7.14 litres A = 2230 cm² OEM side cooler dimensions: 248 mm x 180 mm x 40 mm V = 1.79 litres A = 446 cm² WT side cooler dimensions: 252 mm x 184 mm x 68 mm V = 3.15 litres A = 464 cm² Attention: Not approved in the area of the StVZO.

Suitable for the following vehicles: Mercedes C190 AMG GT 340-390KW/462-530hp (2015-2020) Mercedes C190 AMG GT S 340-390KW/462-530hp (2015-2020) Mercedes C190 AMG GT C 410KW/557hp (2017+) Mercedes C190 AMG GT R 430KW/585hp (2017+) The 4.0L V8 biturbo engine of the AMG GT models is equipped with an indirect charge air cooling circuit. This means that the charge air cooling process is not realised using the ambient air as a cooling medium (as usual), but with the help of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water cooler come into play. The newly developed competition racing mesh of the WAGNERTUNING high-performance water cooler increases the radiator volume of the standard water cooler by a total of 75 %. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the neighbouring components (e.g. the engine water cooler behind it) sufficient air flow for heat exchange. Furthermore, the water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. Installation of the system is also uncomplicated and plug & play with the help of our installation instructions. OEM front cooler dimensions: 640 mm x 420 mm x 26 mm V = 7.00 litres A = 2688 cm² WT front cooler dimensions: 645 mm x 395 mm x 52 mm V = 12.2 litres +75% A = 2546 cm² Attention: Not approved in the area of the StVZO.

Suitable for the following vehicles:Mercedes Benz W205 C63 AMG 350KW/476hp (from 2015)Mercedes Benz W205 C63S AMG 375KW/510hp (from 2015) The 4.0L V8 biturbo engine of the C63 (S) models from AMG is equipped with an indirect charge air cooling circuit. This means that the charge air is not cooled using the ambient air as a cooling medium (as usual), but with the help of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water coolers come into play.The newly developed competition racing nets of the WAGNERTUNING high-performance water coolers increase the radiator volume of the standard water coolers by a total of 80 %. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the adjacent components (e.g. the engine water cooler behind it) sufficient air flow for heat exchange. Furthermore, the water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. Installation of the system is also straightforward and plug & play with the help of our installation instructions. Dimensions OEM side cooler:240 mm x 250 mm x 27 mmV = 1.62 litersA = 600 cm² WT side cooler dimensions:240 mm x 240 mm x 52 mmV = 3.00 litersA = 576 cm² Attention: Not approved in the area of the StVZO.

Suitable for the following vehicles: Mercedes Benz W213/S213 E63 AMG 420KW/571PS (from 2017) Mercedes Benz W213/S213 E63S AMG 450KW/612PS (from 2017) The 4.0L V8 biturbo engine of the E63 (S) models from AMG is equipped with an indirect charge air cooling circuit. This means that the charge air cooling process is not realised using the ambient air as a cooling medium (as usual), but with the help of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNER TUNING Upgrade water coolers come into play. The newly developed competition racing nets of the WAGNER TUNING high-performance water coolers increase the radiator volume of the standard water coolers by a total of 100 %. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the neighbouring components (e.g. the engine water cooler behind it) sufficient airflow for heat exchange. Furthermore, the water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. Installation of the system is also straightforward and plug & play with the help of our installation instructions. OEM front cooler dimensions: 640 mm x 430 mm x 27 mm V = 7.43 litres A = 2752 cm² WT front cooler dimensions: 645 mm x 390 mm x 52 mm V = 13.2 litres (+75%) A = 2539 cm² OEM side cooler dimensions: 260 mm x 213 mm x 32 mm V = 1.77 litres A = 553 cm² WT side cooler dimensions: 264 mm x 242 mm x 86 mm V = 5.5 litres (+210%) A = 638 cm² (+15%) Attention: Not authorised in the area of the StVZO.

The Competition water cooler kit is suitable for the following models:Volkswagen T6 2.0 TDI: 62-110KW/84-150hp (2016-2019)Volkswagen T6.1 2.0 TDI: 66-110KW/84-150hp (2019-)Volkswagen T6 2.0BiTDI: 146-150KW/199- 204hp (2016-2019)Volkswagen T6.1 2.0BiTDI: 146-150KW/199- 204hp (2019-) Maximum performance and optimum cooling for your VW T6/T6.1 2.0 TDI with our Competition water cooler kit. The 2.0-liter TDI engine of the VW T6/T6.1 is equipped with an indirect charge air cooling circuit, which does not cool the charge air with ambient air as usual, but with its own cooling water circuit. A reduction in the cooling water temperature leads directly to an improved cooling performance of the charge air. This is where the advantages of our Wagner Tuning Upgrade water cooler come into play. Our newly developed competition racing nets increase the radiator volume of the standard water cooler by an impressive 30%. The ratio between the inner and outer cooling surface ensures maximum heat transfer and at the same time allows sufficient airflow for adjacent components such as the engine water cooler. The increased cooling water volume means that the entire system thermal can be kept at a lower level over a longer period of time. All Wagner Tuning water coolers are equipped with a thermally conductive anti-corrosion coating that ensures a long-lasting cooling effect. Installation of the system is uncomplicated and almost plug-and-play thanks to our detailed installation instructions. Prepare your VW T6/T6.1 2.0 TDI for maximum performance and optimum cooling with our Competition water cooler kit. Dimensions OEM water cooler:714 mm x 245 mm x 54 mmV = 9.5 litersA = 1750 cm² Wagner Tuning water cooler dimensions:710 mm x 311 mm x 56 mmV = 12.4 liters (+30%)A = 2208 cm² (+26%) Scope of delivery:1x frontal water cooler black coated (low temperature circuit)1x installation instructionsAttention: Not approved in the area of the StVZO.

CSF Race water cooler for BMW E9x Triple Pass cooler With CSF's exclusive B-Tube technology and 6.5 mm multi-fin height, 1-hour polished mirror finish, CNC-machined mounting bracketsTrue drop-in fit: no adjustments during installation CSF manufactures the most advanced and efficient radiator cores in the industry by using innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation. These techniques allow CSF to stay ahead of the curve in radiator technology! “B-Tube” technologyIn contrast to a normal “O” type oval radiant tube, CSF uses a specially developed tube in the shape of a “B”. These “B-Tubes” are carefully formed and then soldered over the seam to seal it. CSF is able to use thinner and lighter aluminum material (better cooling efficiency) because this design is actually stronger than normal “O” shape tubes that are welded. The design (inlet in the center of the tube which is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over normal tubes. You get the efficiency of 2 smaller tubes versus 1 large tube with the same space criteria. With “B-Tubes” you can get “Dual Liquid Laminar Flow”. High Efficiency Multi Louvered FinCSF uses high efficiency multi-louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application and tested in our wind tunnel lab for maximum heat dissipation efficiency. Compatible vehicles:BMW 3 (E90) M3 2007-2011BMW 3 (E90) M3 CRT 2011-2011BMW 3 Convertible (E93) M3 2008-2013BMW 3 Coupe (E92) M3 2007-2013BMW 3 Coupe (E92) M3 GTS 2007-2013

CSF Race Water cooler for BMW E46 Triple Pass coolerFeatures CSF's exclusive B-Tube technology and 6.5mm multi-fin height, 1-hour polished mirror finish, CNC machined mounting brackets True drop-in fit with no modifications requiredCSF manufactures the most advanced and efficient radiator cores in the industry by using innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation. These techniques allow CSF to stay ahead of the curve in radiator technology! “B-Tube” technologyIn contrast to a normal oval “O” type radiant tube, CSF uses a specially developed tube in the shape of a “B”. These “B-Tubes” are carefully formed and then soldered over the seam to seal it. CSF is able to use thinner and lighter aluminum material (better cooling efficiency) because this design is actually stronger than normal welded “O” shape tubes. The design (inlet in the center of the tube which is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over normal tubes. You get the efficiency of 2 smaller tubes versus 1 large tube with the same space criteria. With “B-Tubes” you can get “Dual Liquid Laminar Flow”. High Efficiency Multi Louvered FinCSF uses high efficiency multi-louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured, calculated and tested in our wind tunnel lab for maximum heat dissipation efficiency for each application. MaterialThe CSF Race-Spec water cooler is made of durable aluminum. This material is characterized by its excellent thermal conductivity, corrosion resistance and durability. This ensures a long service life for this part. InstallationThanks to the replacement assembly, installation is as easy as with an original part. This means you can replace your old radiator with this CSF Race-Spec water cooler without any complications. In terms of both fit and installation technology, this radiator is the same as the original part and can therefore be installed without any modifications or adjustments. Compatible vehicles:Make Model Type Year of manufactureBMW 3 Convertible (E46) M3 2001-2006BMW 3 Coupe (E46) M3 2000-2006BMW 3 Coupe (E46) M3 CSL 2003-2003