Actuator for exhaust flap OEM part number: 18307851568 (18 30 7 851 568) Suitable for the following BMW models with exhaust flap: F80 F82 F83 F85 F86 F87N F90 F91 F92 F93 F95 F96 F97 F98 G01 G02 G05 G06 G14 G15 G16 G20 G21 G22 G23 G26 G30 G42 G82 G83

Here you get an original TitanTec sports air filter with all its advantages:- higher air flow rate- higher filter performance (even smaller particles are filtered)- The particles are trapped in the filter after intake and thus remain trapped until cleaning.- Washable and reusable filter- Increased air flow and therefore better combustion in the engine- No reduction in air flow over a minimum of 50,000 km- Sufficient air even at high engine speeds- more power- Better intake noise- Reduced fuel consumption Only TitanTec sports air filters use polyurethane as the edge material. Polyurethane is more resistant to petrol, vapours and the like. It has an ideal remoulding. This ensures that the edge of the filter is 100% sealed even when it is reinserted after cleaning. The edge surface is made from a single mould. With many other makes, pores in the edge material and joining surfaces where the edge is joined together often lead to a crack in the edge, which can result in unclean air being sucked into the engine. With paper filters, the air flow rate is significantly lower and decreases further after just a short period of use.In addition, paper filters must be disposed of after the specified mileage. TitanTec sports air filters last a lifetime. This is good for the environment and your wallet.Compared to TitanTec sports air filters, other washable cotton filters only filter much larger particles. Cleaning the filters:A TitanTec sports air filter has no oil residue and has 100% of its original performance again after cleaning.Cleaning is quick and easy.We recommend cleaning after 15,000-20,000 kilometres or once a year at the latest.The best time to clean the air filter is around the end of May or beginning of June, i.e. after the pollen count, as this is the time when the air filter is under the most strain.Under no circumstances should aggressive cleaning agents such as petroleum ether, cleaning petrol, brake cleaner etc. be used, as this can damage the material. Details: 1x set of panel filters (right/left) Length: 264 mm Width: 215 mm Compatible vehicles:BMW M5 (F90) 600 hp, 441 kW, 09/17 to 06/23 BMW M5 (F90) M5 Competition, 625 hp, 460 kW, 07/18 to 06/23 BMW M5 (F90) M5 CS, 635 hp, 467 kW, 03/21 to 02/22 BMW M5 (G90) M5 plug-in hybrid all-wheel drive, 727 hp, 535 kW, from 07/24 BMW M5 Touring (G99) M 5 plug-in hybrid all-wheel drive, 727 hp, 535 kW, from 10/24 BMW M8 Coupe (F92) M8, 600 hp, 441 kW, from 07/19 BMW M8 Coupe (F92) M8 Competition, 625 hp, 460 kW, from 07/19 BMW M8 Gran Coupe (F93) M8, 600 hp, 441 kW, from 11/19 BMW M8 Gran Coupe (F93) M8 Competition, 625 hp, 460 kW, from 11/19 BMW M8 Convertible (F91) M8, 600 hp, 441 kW, from 07/19 BMW M8 Convertible (F91) M8 Competition, 625 hp, 460 kW, from 07/19Note: This is NOT an original BMW product!

Facts: - replaces the main catalytic converter - with 200-cell stainless steel sports catalytic converter - Euro 6 compatible - for non-OPF vehicles - optionally with thermal insulation (with surcharge) - without approval in the area of the StVZO Compatible vehicles:VehicleVehicle typePower outputcubic capacityEngineYear of construction BMW 5 Series (F90)M5 441kW / 600PS4395ccS63 B44 B09.17 - Note: Depending on the software version, the engine control light may light up. We recommend adapting the software in this case.

Facts: - Catless - with thermal insulation - aggressive sound - no excessive noise under normal driving conditions - without approval in the area of the StVZO Compatible vehicles:VehicleVehicle typePowerCapacityEngine typeYear of construction BMW 5 Series (F90)M5 441kW / 600hp4395cm³S63 B44 B09.17 - 11.20 BMW 8 Series (F91/F92/F93)M8 441kW / 600hp4395cm³S63 B44 B09.17 - 11.20 Attention: Not for models manufactured after 11/2020! Note: Depending on the software version, the engine control light may light up. We recommend adapting the software in this case.*ATTENTION: Cat replacement pipes marked “without approval” are not permitted for use on public roads and are intended for racing purposes only! If you nevertheless install a product without approval in your vehicle and use it within the scope of the StVZO, you are liable to prosecution. Possible consequences that you can expect in this case: Expiry of the operating license according to §19 of the StVZO and a possible resulting immobilization of the vehicle. Other possible consequences, such as a charge of tax evasion, as well as possible investigations by the environmental authorities are at the discretion of the investigators.

Facts: - replaces the main catalyst - with 300 cell stainless steel sports catalyst - Euro 6 compatible - for current OPF models - with Thermo-Integral insulation (for an extra charge) - with ECE approval* Compatible vehicles:VehicleVehicle typePower outputEngine capacityEngineYear of construction BMW 5 Series (G30/G31)540i / xDrive250kW / 340PS2998cm³B58 B30 A, B58 B30 C09.16 - 07.19 BMW 5 Series (G30/G31)540i / xDrive265kW / 360PS2998ccB58 B30 A09.16 - 07.19 BMW 6 Series (G32)640i / xDrive250kW / 340hp2998cm³B58 B30 A, B58 B30 C06.17 - 07.19 BMW 6 Series (G32)640i / xDrive265kW / 360PS2998cm³B58 B30 A, B58 B30 C06.17 - 07.19 Note: Depending on the software version, the engine control light may light up. We recommend the purchase of an OFF set module or software customisation. *This downpipe has ECE approval so that it can be used within the scope of the StVZO without registration in the vehicle documents.

Facts: - replaces the main catalytic converter - with 4x stainless steel sports catalytic converter - Euro 6 compatible - optionally with Thermo-Integral insulation (with surcharge) - with ECE approval*Compatible vehicles:VehicleVehicle typePower outputEngine capacityEngineYear of construction from BMW 5 Series (F90)M5 441kW / 600PS4395ccS63 B44 B2019 - BMW 5 Series (F90)M5 Competition460kW / 625PS4395ccS63 B44 B2019 - BMW 5 Series (F90)M5 CS467kW / 635PS4395ccS63 B44 B2019 - BMW 8 Series (F92)M8 441kW / 600PS4395ccS63 B44 B2019 - BMW 8 Series (F92)M8 Competition460kW / 625PS4395ccS63 B44 B2019 - BMW X5 (F95)M441kW / 600PS4395ccS63 B44 B2019 - BMW X5 (F95)M Competition460kW / 625PS4395ccS63 B44 B2019 - BMW X6 (F96)M441kW / 600PS4395ccS63 B44 B2019 - BMW X6 (F96)M Competition460kW / 625PS4395cm³S63 B44 B2019 - With combination certificate in conjunction with the Aulitzky Exhaust exhaust system, intercooler, intake and our power increase to 760PS.Note: Depending on the software version, the engine control light may light up. We recommend adapting the software in this case.Suitable for OE article number: 18328088820 Catalytic converter cyl. 1-4 18328088821 Catalytic converter cyl. 5-8 18329504708 Catalytic converter bottom cyl. 1-4 18329504709 Catalytic converter cyl. 5-8 *This downpipe has ECE approval so that it can be used within the scope of the StVZO without registration in the vehicle documents.

Facts: - 4.49“ (114mm) > 3” (76mm), replaces the main catalyst - with 200 cell stainless steel sports catalyst - Euro 6 compatible - for current OPF models - with Thermo-Integral insulation (for an extra charge) - with ECE approval* Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 5 Series (G30/G31)540i / xDrive250kW / 340hp2998cm³B58 B30 A, B58 B30 C08.19 - 06.20 BMW 5 Series (G30/G31)540i / xDrive265kW / 360hp2998cm³B58 B30 A08.19 - 06.20 BMW 6 Series (G32)640i / xDrive250kW / 340hp2998cm³B58 B30 A, B58 B30 C08.19 - 06.20 BMW 6 Series (G32)640i / xDrive265kW / 360hp2998cm³B58 B30 A, B58 B30 C08.19 - 06.20 Note: Depending on the software version, the engine control light may come on. We recommend the purchase of an OFF set module or software customisation. *This downpipe has ECE approval so that it can be used within the scope of the StVZO without registration in the vehicle documents.

Facts: - Exhaust flaps with ceramic bearings - Electric flaps - Plug & Play driveable with original exhaust system - Approval/installation possible in conjunction with our downpipe - Cat/OPF back system - Made in Germany (Lake Constance) - with/without ECE approval (depending on choice of flap control)* Compatible vehicles:VehicleTypePowerEngine capacityEngineYear of construction BMW 5 Series (F90)M5 441kW / 600hp4395ccS63 B44 B09.17 - BMW 5 Series (F90)M5 Competition460kW / 625hp4395cm³S63 B44 B07.18 - BMW 5 Series (F90)M5 CS467kW / 635hp4395cm³S63 B44 B03.21 - BMW 8 Series (F92)M8 441kW / 600hp4395cm³S63 B44 B07.19 - BMW 8 Series (F92)M8 Competition460kW / 625hp4395cm³S63 B44 B07.19 - *ATTENTION! In conjunction with the standard or ECE flap control system (with type approval), this flap exhaust system has ECE approval so that it can be used legally within the scope of the StVZO without registration in the vehicle documents.The use of flap exhaust systems in conjunction with the race flap control (without approval) is not permitted for use on public roads and is only intended for racing purposes! If you nevertheless install a product without approval in your vehicle and use it within the scope of the StVZO, you are liable to prosecution. Possible consequences that you can expect in this case: Expiry of the operating licence in accordance with §19 of the StVZO and possible resulting immobilisation of the vehicle. Other possible consequences, such as a charge of tax evasion, as well as possible investigations by the environmental authorities are at the discretion of the investigators.

Facts: - Exhaust gas flaps with ceramic bearings - Electric flaps - OPF back system - Made in Germany (Lake Constance) - ECE approval* Compatible vehicles:VehicleVehicle typePower outputEngine capacityEngineYear of construction BMW 5 Series (G90/G99)M5 535kW / 727PS4395ccS68 B44 A07.24 - *In conjunction with the standard flap control unit (with operating licence), this flap exhaust system has ECE approval, meaning that it can be used legally within the scope of the StVZO without registration in the vehicle documents.

Function:- variable flap control of the original or retrofitted flap exhaust system- controllable via steering wheel buttons Compatible vehicles: VehicleTypePowerEngine capacityEngine typeYear of constructionBMW 5er (F90)M5 441kW / 600hp4395cm³S63 B44 B09.17 - BMW 5er (F90)M5 Competition460kW / 625hp4395cm³S63 B44 B07.18 - BMW 5er (F90)M5 CS467kW / 635hp4395cm³S63 B44 B03.21 - Note: This product is NOT StVZO approved and NOT intended for sale within the EU! This item is for show & motorsport purposes only and must not be used/installed on public roads. If the component is installed on/in the vehicle, the operating license expires! The pictures shown are examples.

The Endless pads are an excellent brake pad for everyday road use with sporadic track days. Despite reduced dust and noise emissions, the MX72 brake pad impresses with excellent deceleration values even in the high temperature range. In contrast to the ME20 and ME22 pads, the MX72 has heat protection plates.Coefficient of friction 0.37 - 0.47 µOperating temperature 50 - 700 °CSemi-metallic pad For the front axle. Compatible vehicles:BMW M2 F87 Competition with large gray 6-piston sports brakeBMW M2 F87 CSBMW M5 F10 Motorsport article - without STVZO approval.

MOVIT DDE steel brake system 380x32mm (6 piston calliper) for the front axle, from 19 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined. The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications. The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple layer of paint.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts Attention: The conversion means that only rims with at least 19 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. MOVIT sports brake callipers, 6-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force MOVIT sports brake discs, 380x32mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Highest fading resistance- Special alloy for high thermal conductivity MOVIT comfort brake pads- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x assembly material1x installation instructions and running-in instructions1x parts certificate Compatible vehicles:BMW 5 Series (E60) M5 373kW / 507PS / 4999cm³ / S85BMW 6 Series (E63) M6 373kW / 507PS / 4999cm³ / S85

The SOOQOO front canards made of pre-preg Carbon fiber give your vehicle a distinctly sporty aggressivenessDetails:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x front spoiler in prepreg carbon fibre Compatible vehicles:BMW M5 G90BMW M5 G99 TouringNote: This is NOT an original BMW product!

Facts: - 3 inch (76cm) Charge Pipe made of T-6061 aluminum in black - incl. mounting rubbers, clamps - replaces the BMW original part with the part number 13718601684 - Plug'n'Play installation - without approval in the area of the StVZO The aluminium charge pipe replaces the factory plastic pipe. In more powerful vehicles, the increased boost pressure can cause the original pipe to burst. In the worst case, this can lead to engine damage due to fragments being sucked in. Compared to the original, the pressure pipe has an enlarged diameter of 76mm (3").This reduces air turbulence and at the same time increases the air flow. This allows the turbocharger to respond more quickly, which increases the maximum possible output. The engine control unit does not need to be retuned. Even at very high charge pressures, there is no risk of bursting with this pressure pipe. The charge pipe also provides a good basis for retrofitting a water-methanol injection system; a connection for the injector is already prepared (thread for water-methanol injection: 1/8" inch, 21/64 fine thread).The charge pipe is fitted as a plug'n'play direct replacement for the standard part. The charge pipe replaces the original part with the following part number: 13718601684 Compatible vehicles:BMW 1' F20 LCI (09/2015 - 08/2018) M140i / xDriveBMW 1' F21 LCI (09/2015 - 08/2018) M140i / xDriveBMW 2' F22 (09/2015 - 06/2017) M240i / xDriveBMW 2' F22 LCI (09/2016 - 08/2018) M240i / xDriveBMW 2' F23 (09/2015 - 06/2017) M240i / xDriveBMW 2' F23 LCI (10/2016 - 08/2018) M240i / xDriveBMW 3' F30 LCI (10/2014 - 09/2018) 340i / xDriveBMW 3' F31 LCI (10/2014 - 08/2018) 340i / xDriveBMW 3' F34 GT LCI (09/2015 - 07/2018) 340i / xDriveBMW 4' F32 (04/2015 - 02/2017) 440i / xDriveBMW 4' F32 LCI (05/2016 - 08/2018) 440i / xDriveBMW 4' F33 (03/2015 - 02/2017) 440i / xDriveBMW 4' F33 LCI (05/2016 - 08/2018) 440i / xDriveBMW 4' F36 Gran Coupé (03/2015 - 02/2017) 440i / xDriveBMW 4' F36 Gran Coupé LCI (05/2016 - 07/2018) 440i / xDriveBMW 5' G30 (10/2015 - 08/2018) 540i / xDriveBMW 5' G31 (03/2016 - 07/2018) 540i / xDriveBMW 5' G38 (02/2016 - 08/2018) 540i / xDriveBMW 6' G32 GT (09/2016 - 07/2018) 640i / xDriveBMW 7' G11 (10/2014 - 07/2018) 740i / xDriveBMW 7' G12 (10/2014 - 08/2018) 740i / xDriveBMW X3 G01 (10/2016 - 09/2018) xDrive M40iBMW X4 G02 (03/2017 - 08/2018) xDrive M40i Attention: Not approved in the area of the StVZO.

H&R coilover springs for the G90 Sedan H&R coil springs are specially tuned to deliver noticeably better performance in everyday use without any significant loss of comfort. Details: Front lowering: 25-35 mm Rear lowering: 10-20 mm Axle load: Front up to 1475 kg / Rear up to 1550 kg For standard dampers with and without electric adjustment With parts certificate Product overview: Sporty look and performance Stepless lowering of the vehicle's center of gravity (within the tested adjustment range) For standard dampers with and without electric adjustment Function of electrically adjustable dampers remains unrestricted Optimized driving dynamics With parts certificate Developed and produced in Germany Compatible vehicles: BMW M5 G90 (Sedan) 4.4l 535kW plug-in hybrid all-wheel drive (585 hp)

H&R coilover springs for the G99 Touring H&R coil springs are specially tuned to deliver noticeably better performance in everyday use without any significant loss of comfort. Details: Front lowering: 25-35 mm Rear lowering: 20-30 mm Axle load: Front up to 1475 kg / Rear up to 1670 kg For standard dampers with and without electric adjustment With parts certificate Product overview: Sporty look and performance Stepless lowering of the vehicle's center of gravity (within the tested adjustment range) For standard dampers with and without electric adjustment Function of electrically adjustable dampers remains unrestricted Optimized driving dynamics With parts certificate Developed and produced in Germany Compatible vehicles: BMW M5 G99 (Touring) 4.4l 535kW plug-in hybrid all-wheel drive (585 hp)

Transform your F9X into a high-performance powerhouse with the BlackBoost cooling air intake system. Experience more power, style and driving dynamics with this premium upgrade. In the world of performance modifications, the airbox is one of the most important engine components you should upgrade. The factory airbox is very restrictive in terms of airflow and filter area. Our cooling air intakes are designed and engineered to overcome these factory restrictions and deliver the maximum airflow with the lowest possible temperatures given the space available. The BlackBoost Cold Air Intakes are designed to be flush with the bonnet of the vehicle and ensure a consistent seal with the rubber seals of the airbox, whilst also ensuring a large surface area for our 10.92cm (4.3 inch) Twin Flow Conical Filters to work properly. The BlackBoost Twin Flow filters have been specifically designed to maximise airflow and surface area. With a diameter of 10.92 cm (4.3 inches) and a height of 20.32 cm (8 inches), they are guaranteed to provide the best airflow and protection. The airboxes are laser-cut aluminium panels with highly complex CNC bends, assembled with stainless steel fasteners and finished with a high-quality black powder coating. The BlackBoost intake kit is a plug-and-play solution that works perfectly without further customisation and requires no additional software tuning. It also works smoothly in combination with turbo upgrades, downpipes, methanol injections etc. to unleash the necessary airflow and utilise the full capacity of the machine for those aiming for 1000+ WHP figures. Scope of delivery:- Powder coated airbox- 2x 10.92 cm (4.3 inch) twin high flow dry filters- 2x BlackBoost CFD developed filter adapters Key features:- Proven power increase from 8 to 30+ hp on production vehicles- Improved responsiveness across the entire rev range- Optimised airflow and increased volume range compared to standard equipment- Increased surface area of the filter elements- Can support airflow for 1000+ WHP configurations- Larger filter element surface area compared to OEM- Plug-and-play bolt-on installation- No ECU tuning required Compatible vehicles: BMW M5 (F90) 441kW/600hp 4395cm³ S63B44B (2017+) BMW M5 (F90) Competition 460kW/625hp 4395cm³ S63B44B (2017+) BMW M5 (F90) CS 467kW/635hp 4395cm³ S63B44B (2017+) BMW M8 (F91/F92/F93) 441kW/600hp 4395cm³ S63B44B (2019+) BMW M8 (F91/F92/F93) Competition 460kW/625hp 4395cm³ S63B44B (2019+)

The Competition intercooler kit is suitable for the following vehicles:BMW G30/G31 518d MKB: B47 110KW/150hp (2018+) *BMW G30/G31 520d MKB: B47 140KW/190hp (2017-2020) *BMW G30/G31 525d MKB: B47 170KW/231hp (2017-2019) *BMW G30/G31 530d MKB: B57 195-210KW/265-286hp (2017-07/2020) *BMW G30/G31 540d MKB: B57 235-250KW/320-340hp (2017-07/2020) *BMW G32 620d MKB: B47 140KW/190hp (2018-2020) *BMW G32 630d MKB: B57 195-210KW/265-286hp (2017-07/2020) *BMW G32 640d MKB: B57 235-250KW/320-340hp (2017-07/2020) *BMW G11/12 740d MKB: B57 235-250KW/320-340hp (2017-07/2020) *BMW G14/15/16 840d MKB: B57 235-250KW/320-340hp (2017-07/2020) **not suitable for facelift vehicles from 07/2020 and/or with XD5O engine Optimize the performance of your vehicle with our Wagner Tuning Competition high-performance intercooler! Do you want to unleash the full potential of your vehicle? Our Competition high performance intercooler is the answer to your performance needs and offers: Our intercooler sets new standards. With impressive mesh dimensions of 570 mm x 236 mm x 150 mm (stepped), it offers an astonishing 70% larger flow area and a significant 112% more charge air volume compared to the standard intercooler. This results in a noticeable increase in performance and a better overall driving experience. Our high-performance mesh has been specially developed and is characterized by its quality. It consists of a Tube Fin mesh with internal turbulators, which ensures optimum air flow and heat dissipation. Although our intercooler is large, it only weighs 10.5 kg. This means that you can increase the performance of your vehicle without increasing the weight, which has a positive effect on driving dynamics. Thanks to extensive flow optimization in the CAD system, the cast aluminium end boxes of our intercooler ensure excellent cooling performance with minimal back pressure. This is crucial for an efficient increase in performance. All our intercoolers are equipped with an anti-corrosion coating that not only prevents rust, but also has heat conduction properties. This ensures long-lasting and optimum cooling, which in turn improves performance. Our intercooler is supplied as a complete ready-to-install kit, allowing for easy replacement with the stock intercooler - plug-and-play. The use of the original charge air hoses is still possible. We subject all our products to strict quality control to ensure that you receive only the best. It's time to take your vehicles performance to the next level. With our Competition high performance intercooler, you can expect more power, better cooling and an overall improved driving experience. Experience the future of performance enhancement. Invest in quality and boost your vehicles performance with our Competition High Performance Intercooler! Advantages of the Wagner Tuning intercooler:- improved cooling performance- 70% larger inflow area- 112% more charge air volume- Optimized air flow- Minimal back pressure- Plug and Play Dimensions original intercooler:545mm x 145mm x 96mmV=7.6 litersA=790 cm² Wagner Tuning intercooler dimensions:570mm x 236mm x 150mm / steppedV=16.2 litersA=1345 cm² Scope of delivery:1 intercooler (black coated)1 installation instructionAttention: Not approved in the area of the StVZO.

The Wagner Tuning Competition intercooler kit fits the following vehicles with the N20 engine:BMW F07/F10/F11 520i 2010+BMW F07/F10/F11 528i 2010+ The Wagner Tuning Competition intercooler - maximum performance, minimum effort! Ready to give your 5 Series (F10/F11/F18) an impressive performance boost? The Wagner Tuning Competition intercooler is the answer. With mesh dimensions of 500mm x 254mm x 110/55mm (stepped), this intercooler offers a massive 83% larger flow area and an impressive 62% more charge air volume compared to the stock intercooler. This allows your engine to take in more air, resulting in a noticeable and immediate increase in performance. Our Competition high performance mesh has been specifically designed to provide sufficient airflow to adjacent components such as the water cooler. Despite its outstanding performance, it remains lightweight and weighs only 7.4 kg. The CAD-developed free-form end boxes with cast aluminum inner baffles ensure the best possible internal airflow. This minimizes back pressure and maximizes the performance of your engine. In addition to its performance-enhancing function, this intercooler has an anti-corrosion coating with excellent heat conduction properties. This ensures optimum cooling, which leads to a further increase in performance. Installation is carried out by replacing the OEM intercooler and is straightforward. No complex modifications are required. Our products are subject to strict quality control procedures to ensure that they meet the highest standards. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 83% larger inflow area- 62% more charge air volume- flow-optimized- uncomplicated replacement Get your 5 Series (F10/F11/F18) ready for the road. With the Wagner Tuning Competition intercooler you will experience an increase in performance like never before. Order now and feel the difference! Scope of delivery:1 intercooler1 assembly instructionAttention: Not approved in the area of the StVZO.

Includes the following services:- Remove and replace connecting rod bearings- Check and measure crankshaft journals- Check and adjust oil pump- Clean all parts- Wheel alignment- Change oil and filter- Including all parts such as bearings, screws, seals, oil filter and engine oil (10W60)- Entry with BMW company number stamp in the service booklet- 1 l oil refillIn addition and depending on requirements, we can also replace the spark plugs and engine bearings for an additional charge for the parts. Note:This service can only be carried out at our company headquarters!

Includes the following services: - Removing and replacing the connecting rod bearings - Check and measure crankshaft journals - Check and adjust the oil pump - Clean all parts - Wheel alignment - Oil & filter change - incl. all parts such as bearings, screws, seals, oil filter and engine oil (10W60) - Entry in the service booklet with BMW registration number stamp - 1 litre oil refill In addition, and depending on requirements, we can also replace the spark plugs and engine mounts for an additional charge. Please note: This service can only be carried out at our company headquarters!

Your 5 Series is missing a data display! We present the data display for the E39 here. Access to all data from the engine control unit:So ALL. The sensors are queried directly via CanBus and are displayed on our tried and tested MFD28. The display comes with a vehicle-specific panel and fits into the interior like an original part. The ventilation remains intact through the slots. The sensors are interrogated by the CanBus via the manufacturer-specific protocol. We have optimised the protocol to achieve maximum polling speed. Details:- Integrates perfectly into the vehicle interior- Up to 128 sensors can be interrogated- 10 individually configurable views with our DSS - Display Setup Software- ready-made views for a quick start with our display- simply plug and play via our cable set - plug in, done- 4 additional analogue inputs for exhaust gas temperature, oil pressure and more- Best readability - optional anti-reflective film included- Query the sensors like manufacturer diagnostic tools Performance metre:Measure your acceleration times in our performance widget - 0-100, 100-200, 0-200 Data jogging:Log all data to the internal SD card. Whether "on-demand" (start with a tap) or permanently. All data from your last turn is saved. Preset alarms:Preset alerts can be easily activated and customised. For example, receive a large warning message if the exhaust gas temperature is above 900 degrees. 4 additional analogue inputs:Additional temperature and/or pressure sensors can be connected for further monitoring options. e.g. exhaust gas temperature or exhaust gas back pressure. An ethanol sensor can be connected to one of the digital inputs. Read out/delete errors:Read out errors from the engine control unit in plain text and also delete them Customised designWhether it's the customised start screen or the selection from a variety of different widgets. Make the display your display! Access to all data from the engine control unit:We supply your display with a ready-made TRI file as standard. All sensors that are queried are defined here. Temperatures:Engine water temperature, intake temperature, exhaust temperature, transmission temperature Pressures:Boost pressure, ambient pressure, oil pressure Lambda/mixture:Lambda value target/actual, short-term lambda adjustment, long-term lambda adjustment, MAF, engine load, torque Driver dynamics:Brake pressure, vehicle speed, throttle angle/gas pedal position Other:Engine speed, total ignition angle, gear, battery voltage, ignition angle reduction per cylinder Analogue inputs:Additional sensors can be added here: Oil temperature, petrol pressure, oil pressure, exhaust gas temperature, etc. but also an ethanol sensor (Flex Fuel) If values are missing, they can easily be added. ATTENTION: not every engine offers all values! For which engines and models is the display:The display panel fits all E39 vehicles with M62 or S62 engines (LHD or RHD).MFD28 Technical data:- Dimensions: 70.3 x 52mm - Hardware: 2.8" TFT screen, touchscreen, MicroSD, MicroUSB- High-quality milled aluminium front frame- Symmetrical display - ideal for rotating it by 90°- Views completely freely configurable on the PC with our DSS - Display Setup Software- Up to 64 widgets per display- 64 sensors (Can Bus + internal)- 10 views- 4x analogue inputs- Optional external switching flash- Can bus switching- Can Bus protocols: UDS, KWP2000, OBD Supported values:Many KViele customers always ask: "Which values can I query from my control unit". The answer: "ALL". Our MFD28 is compatible with ISO 11898-2 and SAE J2284.The control unit manufacturers themselves determine which values are sent via the CAN bus interface. The documentation is important here - possibly even in the form of a DBC file that can be imported directly. You can also access our extensive list of already implemented control units. This can be found in the download area. A total of up to 50 sensors can be queried if the manufacturer supports this.Broadcast data as well as OBD2 queries via Can Bus (11bit/29bit) are implemented. Special protocols such as TP2.0 from VW/Audi and UDS are also available. DSS - Display Setup Software:With our DSS - Display Setup Software, the display can be conveniently configured on the PC. The Can Bus protocol can be customised, you can import DBC files and design the displays with your own widgets.The log viewer downloads log files from the display. These can then be viewed and values can be individually selected and scaled.An in-built Can Bus logger allows you to take a close look at the log. This can be used to reverse-engineer unknown Can Buses.

A high-end kit for a high-end car. The new F90 gets a new, innovative look. The new AERO body kit from 3DDesign for the F90 fits seamlessly into the familiar, discreetly aggressive race style of the 3DDesign lines. The iconic design is complemented by a perfect fit and the usual uncompromising quality. The real eye-catcher and centerpiece of the body kit - an carbon diffuser that is uncompromisingly and aggressively designed as a direct replacement part. The clear lines and curved shape fit perfectly into the image of the F90. Three inner fins not only ensure a racy look, but also optimum airflow. The F90 M5 carbon diffuser comes in two parts and can also be purchased separately. A performance diffuser for the F90, which is also a real visual upgrade! Pure luxury! Compatible vehicles:BMW 5 (G30, F90) M5 2017-2023BMW 5 (G30, F90) M5 Competition 2018-2023

Dry Carbon Competition diffuser for the rear center diffuser of the F90. Designed to mount directly to the factory lower mounting position for quick and easy installation. The rear diffuser features durable and precise plastic mounting positions and is manufactured using autoclave technology for ultimate lightweight, high durability and precise fitment. Compatible vehicles:BMW 5 (G30, F90) M5 2017-2023BMW 5 (G30, F90) M5 Competition 2018-2023

The G90 carbon diffuser gives your vehicle an aggressive sportiness and a lot of road presence.Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style fabric- High-gloss finish- Perfect fit- with certificate Compatible vehicles:- BMW G90 5 Series M5 535kW / 727hp (2024+)Note: This is NOT an original BMW product!

The ECU covers on the right and left are made of high-quality carbon fibre and give your vehicle that certain something. Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration free Scope of delivery:1x set of ECU covers (1x right and 1x left) Compatible vehicles:BMW M5 G90BMW M5 G99Note: This is NOT an original BMW product!

Our high-quality engine cover made from pre-preg carbon fibre is a great addition to enhance the style of your vehicle.The carbon fibre engine cover replaces the standard plastic part. When you buy Pre-Preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run. Installation: Plug&Play Details:- 100% carbon fibre construction- High gloss finish- Performance style design- Supplied with 3M double-sided adhesive tape already attached- Use rubber adapter from the original engine cover + emblem- registration free Compatible vehicles with S58 engine:- BMW G90 M5 - BMW G99 M5 Touring Note: This is NOT an original BMW product!

The front bumper insert with slats made of pre-preg carbon fiber gives your vehicle a distinctly sporty aggressiveness and makes it stand out on the road.Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x front bumper insert in prepreg carbon fibre Compatible vehicles:BMW M5 G90BMW M5 G99 TouringNote: This is NOT an original BMW product!

The front bumper insert made of pre-preg carbon fiber gives your vehicle a distinctly sporty aggressiveness and makes it stand out on the road.Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x front bumper insert in prepreg carbon fibre Compatible vehicles:BMW M5 G90BMW M5 G99 TouringNote: This is NOT an original BMW product!

A revolution in carbon fibre. The front lip from 3DDesign for the G30 turns your 5 Series into a completely new car. The dedication and professionalism in the design and finish ensures an expressive and highly individualised look. Compatible vehicles:BMW 5 (G30, F90) 518 d 2018-2020BMW 5 (G30, F90) 520 d 2016-2023BMW 5 (G30, F90) 520 d xDrive 2016-2023BMW 5 (G30, F90) 520 i 2017-2020BMW 5 (G30, F90) 525 d 2017-2019BMW 5 (G30, F90) 530 d 2016-2020BMW 5 (G30, F90) 530 d xDrive 2016-2020BMW 5 (G30, F90) 530 d xDrive 2016-2020BMW 5 (G30, F90) 530 e Plug-in Hybrid 2017-2020BMW 5 (G30, F90) 530 e Plug-in Hybrid xDrive 2017-2023BMW 5 (G30, F90) 530 i 2016-2020BMW 5 (G30, F90) 530 i xDrive 2016-2023BMW 5 (G30, F90) 540 d xDrive 2017-2020BMW 5 (G30, F90) 540 i 2016-2020BMW 5 (G30, F90) 540 i xDrive 2016-2020BMW 5 (G30, F90) M 550 i xDrive 2017-2019BMW 5 Touring (G31) 518 d 2018-2020BMW 5 Touring (G31) 520 d since 2017BMW 5 Touring (G31) 520 d xDrive Since 2017BMW 5 Touring (G31) 520 i 2017-2020BMW 5 Touring (G31) 525 d 2017-2019BMW 5 Touring (G31) 530 d 2017-2020BMW 5 Touring (G31) 530 d xDrive 2017-2020BMW 5 Touring (G31) 530 i 2017-2020BMW 5 Touring (G31) 530 i xDrive 2017-2020BMW 5 Touring (G31) 540 d xDrive 2017-2020BMW 5 Touring (G31) 540 i xDrive 2017-2020BMW 5 Touring (G31) M 550 d xDrive since 2017BMW 5 Touring Van (G31) 520 d 2017-2018BMW 5 Touring Van (G31) 520 d xDrive 2017-2018BMW 5 Touring Van (G31) 520 i Since 2017BMW 5 Touring Van (G31) 530 d Since 2017BMW 5 Touring Van (G31) 530 d xDrive Since 2017BMW 5 Touring Van (G31) 530 i Since 2017BMW 5 Touring Van (G31) 530 i xDrive Since 2017BMW 5 Touring Van (G31) 540 d xDrive Since 2017BMW 5 Touring Van (G31) 540 i xDrive Since 2017

A high-end kit for a high-end car. The new F90 gets a new, innovative look. The new AERO body kit from 3DDesign for the F90 fits seamlessly into the familiar, discreetly aggressive racing style of the 3DDesign lines. The iconic design is complemented by a perfect fit and the usual uncompromising quality. As with the F10, the front lip comes with a maximum amount of carbon fibre. Above the aggressive centreboard with aero lift slits, the lip extends into the air intakes on the right and left. A performance front lip for the F90 that is also a real visual upgrade! Pure luxury! Compatible vehicles:BMW 5 (G30, F90) 518 d 2018-2020BMW 5 (G30, F90) 518 d mild hybrid 2020-2023BMW 5 (G30, F90) 520 d 2016-2023BMW 5 (G30, F90) 520 d Mild-Hybrid 2019-2023BMW 5 (G30, F90) 520 d Mild-Hybrid xDrive 2019-2023BMW 5 (G30, F90) 520 d xDrive 2016-2023BMW 5 (G30, F90) 520 i 2017-2023BMW 5 (G30, F90) 520 i Mild-Hybrid 2020-2023BMW 5 (G30, F90) 525 d 2017-2019BMW 5 (G30, F90) 530 d 2016-2020BMW 5 (G30, F90) 530 d Mild-Hybrid 2020-2023BMW 5 (G30, F90) 530 d Mild-Hybrid xDrive 2020-2023BMW 5 (G30, F90) 530 d xDrive 2016-2020BMW 5 (G30, F90) 530 e Plug-in Hybrid 2017-2023BMW 5 (G30, F90) 530 e Plug-in Hybrid xDrive 2017-2023BMW 5 (G30, F90) 530 i 2016-2020BMW 5 (G30, F90) 530 i Mild-Hybrid 2020-2023BMW 5 (G30, F90) 530 i Mild-Hybrid xDrive 2020-2023BMW 5 (G30, F90) 530 i xDrive 2016-2023BMW 5 (G30, F90) 540 d Mild-Hybrid xDrive 2020-2023BMW 5 (G30, F90) 540 d xDrive 2017-2020BMW 5 (G30, F90) 540 i 2016-2020BMW 5 (G30, F90) 540 i Mild-Hybrid 2020-2023BMW 5 (G30, F90) 540 i Mild-Hybrid xDrive 2020-2023BMW 5 (G30, F90) 540 i xDrive 2016-2020BMW 5 (G30, F90) 545 e Plug-in Hybrid xDrive 2020-2023BMW 5 (G30, F90) M 550 d xDrive 2017-2020BMW 5 (G30, F90) M 550 i xDrive 2017-2023BMW 5 (G30, F90) M5 2017-2023BMW 5 (G30, F90) M5 Competition 2018-2023

AutoTecknic's vision is to develop the most advanced, innovative and unique products on the market to meet the needs of the most demanding customers. The lightweight carbon fiber aerodynamic products are uniquely designed to enhance the original design of your vehicle. The central design philosophy "understand functional elegance" takes the sporty appearance of your vehicle to a new level. Quality products characterize the AutoTecknic brand. Every single part must pass strict quality controls before it reaches your vehicle. Customers expect nothing less than the best parts from AutoTecknic, so naturally we expect nothing less. AutoTecknic's autoclaved pre-preg carbon fiber structure gives the product superior stiffness, strength and durability compared to traditional handmade carbon fiber composites. AutoTecknic Dry Carbon Center Front Lip for the F90 is both highly visible and highly functional. Compatible vehicles:BMW 5 (G30, F90) M5 2017-2023BMW 5 (G30, F90) M5 Competition 2018-2023

The G90 carbon fibre front lip gives your vehicle a distinctly sporty aggressiveness and just as much presence on the road. Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style fabric- High-gloss finish- Perfect fit- Expertise in preparation Compatible vehicles:- BMW G90 5 Series M5 535kW / 727hp (2024+)Note: This is NOT an original BMW product!

Dry Carbon Performante Aero Splitter for the F90. Designed to seamlessly follow the curvature and mount directly onto the lower bumper mount for quick and easy installation. The Dry Carbon Aero Splitters are manufactured using signature autoclave technology with pre-preg 3K twill carbon fibre and finished with UV protected high gloss clear coat for the ultimate lightweight, durable and snug fitting splitters. The name Dry Carbon comes from the manufacturing process. Dry Carbon is formed by using a pre-preg or impregnated piece of carbon material. This piece of carbon is first placed in a mould and then placed in a sealed vacuum (autoclave) to cure properly. This particular method creates the least amount of waste and forms a lighter version of carbon than the wet method. The autoclave vacuum process for producing dry carbon means that fewer pinholes and virtually no air pockets form in the carbon. Dry carbon is the highest quality version of carbon products produced. AutoTecknic Dry Carbon Performante Aero Splitters are both highly visible and highly functional. Compatible vehicles:BMW 5 (G30, F90) M5 2017-2023BMW 5 (G30, F90) M5 Competition 2018-2023

The G90 Performance front spoiler made of pre-preg carbon fibre gives your vehicle a distinctly sporty aggressiveness and gives it a lot of presence on the road. Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x front spoiler in prepreg carbon fibre Compatible vehicles:BMW M5 G90BMW M5 G99Note: This is NOT an original BMW product!

The G90 SOOQOO front spoiler made of Pre-Preg carbon fibre gives your vehicle a distinctly sporty aggressiveness and gives it a lot of presence on the road. Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x front spoiler in prepreg carbon fibre Compatible vehicles:BMW M5 G90BMW M5 G99Note: This is NOT an original BMW product!

The SOOQOO front spoiler made of Pre-Preg carbon fibre gives your vehicle a distinctly sporty aggressiveness and gives it a lot of presence on the road. Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x front spoiler in prepreg carbon fibre Compatible vehicles:BMW M5 G90BMW M5 G99 TouringNote: This is NOT an original BMW product!

The G90 front spoiler SP90 made of Pre-Preg carbon fibre gives your vehicle a distinctly sporty aggressiveness and gives it a lot of presence on the road. Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x front spoiler incl. mounting material Compatible vehicles:BMW M5 G90BMW M5 G99Note: This is NOT an original BMW product!

Facts: Performance increase of up to 8 hp Material: Carbon Manufacturer: Eventuri Expertise: none The latest product development from Eventuri in England is aimed at the E39. The intake system is intended as a complete solution and replaces the OEM airbox system. The goal of building an intake system that works with the OEM ECU map and MAF sensors is achieved through two components. The square OEM airbox housing is replaced by the patented Eventuri housing, which guarantees a laminar, even airflow without resistance, as in all Eventuri intake systems. In addition, the two scoops integrated into the fog lights in this intake system ensure a genuine cold air flow. The difference to the OEM system is immediately noticeable for every M5 driver. The efficiency of the air supply is achieved by the patented Venturi technology in the filter housings. Equipped with the new GEN2 filters, the airflow is shielded from the engine heat, bundled and channelled in a straight line without major frictional losses. On the test bench, the system shows improved response behaviour and of course the usual great sound of the intake, promising an increase in performance of up to 8 hp. The intake comes with: 2 carbon venturi housings 2 high flow generation 2 air filters 2 aluminium screens for laminar air intake 2 fog light sockets with recessed air intakes 2 flexible neoprene intake manifolds 2 laser cut aluminium shields Laser Cut clamps High quality silicone connectors with BMW specific clamps Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 5 Series (E39)M5 294kW / 400hp4941cm³S62 B5010.98 - 06.03

Facts: more power, better response behaviour and a new sound experience Material: Carbon Manufacturer: Eventuri Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) The Eventuri Carbon Kevlar intake system for F10 is designed to increase engine performance, improve handling and enhance the overall driving experience. Using an inverted cone shaped filter enclosed in a carbon/kevlar housing, Eventuri utilises the so-called Venturi effect. The result is an even laminar airflow, which not only provides more power but also better response behaviour and a new sound experience. The airbox is manufactured using the pre-preg process. The intake system is supplied complete with a parts certificate! Parts certificate The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT BMW M5 (F10) e1*xx/xx*0361*.. DE/AT BMW M6 (F06) e1*xx/xx*0361*.. DE/AT BMW M6 (F12) e1*xx/xx*0361*.. DE/AT BMW M6 (F13) e1*xx/xx*0361*.. Compatible vehicles:VehicleVehicle typePower outputDisplacementEngineYear of construction BMW 5 Series (F10)M5412kW / 560PS4395ccS63 B44 B09.11 - 10.16

Facts: Performance: Increase by 13-18 hp, turbo intake range +160% Material: Carbon Material: Carbon Manufacturer: Eventuri Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) The Eventuri intake system on the G90/G99 has been designed to provide optimized airflow to the turbos while minimizing heat absorption to maximize performance. We have developed a closed system to prevent the intake tract from drawing in heated air and balanced this requirement with the benefits of dual airflow to reduce overall pressure drop. The ducts take air from the OEM supply lines and have secondary openings strategically positioned near the hood latches. These openings tap into a consistently cold area of the engine bay, providing an additional source of cooling air. Furthermore, these secondary vents improve the audibility of the turbos inside the cabin, adding an even more intense dimension to your driving experience. At the heart of the Eventuri G9X intake system are our patented Venturi filter housings. This unique design ensures laminar airflow as the air passes to the turbo inlets. By reducing turbulence and optimizing the flow path, the turbos operate with lower wastegate duty cycles. The combination of patented housings and double air supply ducts leads to improved performance and more precise response. The result: faster acceleration and a more direct connection to the road. The Eventuri Difference The G9X Eventuri system utilizes our patented carbon fiber housings with our custom second generation filters that ensure aerodynamically efficient airflow from the filter to the turbochargers. It is not another cone filter with a heat shield, but a unique design that utilizes the Venturi effect and maintains laminar flow conditions to reduce drag on the turbocharger. Parts certificate The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24 Country model type approval* DE/AT BMW M5 e1*2018/858*00451*.. Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction BMW 5er (G90/G99)M5 535kW / 727hp4395cm³S68 B44 A11.24 -

Facts: Power increase of up to +15 hp Material: Carbon Manufacturer: Eventuri Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) The Eventuri Carbon Intake System for the E60 and E63 is designed to increase engine performance, improve handling and enhance the overall driving experience. The main aspects are the balance between aerodynamic efficiency and air intake temperature. An open system was chosen but with differences to other aftermarket airboxes. This can be recognised by the shape of the carbon housing and the position and shape of the air filter. The inverted cone-shaped filter, which is also encased in carbon fibre, creates the so-called Venturi effect. The resulting uniform laminar airflow means that a power increase of +15 hp is realistic. The airbox is manufactured using the prepreg carbon fibre process. Parts certificate The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT BMW M5 e1*2001/116*0297*.. DE/AT BMW M6 e1*2001/116*0297*.. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 5 Series (E60/E61)M5373kW / 507hp4999cm³S85 B50 A09.04 - 12.10 BMW 6 Series (E63/E64)M6373kW / 507hp4999cm³S85 B50 A09.05 - 08.10

Facts: Acceleration time: 60-130mph Reduced by 0.22 seconds Max. Flow rate per airbox at 28? H2O: Standard 620 CFM, Eventuri 736 CFM Material: Carbon Manufacturer: Eventuri Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) The F90 Eventuri intake system has been developed through extensive real-world testing and airflow simulation analyses. Now in the updated V2 design, it features sealed filter housings to maintain a more stable IAT even when stationary. The new covers that seal the housings, in conjunction with our blade and shield combination, provide unrestricted airflow while maintaining low IATs through cold air saturation. Our large front air scoops channel ambient air directly into the intake area, ensuring that the engine does not suffer from heat soak. In addition, our gold-coloured, heat-reflecting shields have integrated flow guides that direct the ambient air from the blades into the filters. We have also managed to increase the cross-sectional area of the inlet pipe by over 30% compared to the standard inlet, as it passes through the openings in the struts. The Eventuri difference The F90 Eventuri system uses our patented carbon fibre housings with our bespoke Gen 2 filters, providing an aerodynamically efficient airflow path from the filter to the turbos. Not just another cone filter with a heat shield, but a unique design that creates the Venturi effect and maintains laminar flow conditions to reduce turbo drag. Internal volume Another important design feature of the inlet housings is the internal volume of the tubes as they pass through the struts. On the F90, the airbox system must pass through an oval opening in the strut brace on each side before reaching the turbo inlets. We have managed to increase the internal size of our inlets at this junction, resulting in more available volume for the turbos and therefore less restriction. The increase in cross-sectional area between the Eventuri and the standard airbox is 31% as follows: Inner cross-sectional area of the intake pipe at the strut brace: Standard airbox pipe = 6487 mm² Eventuri intake pipe = 8497 mm² Each intake system consists of: 2 x carbon fibre venturi housings with integrated pipes 2 x customised high-performance Generation 2 filters 2 x carbon fibre filter covers 2 x aluminium intake covers 2 x carbon fibre air scoops 2 x laser-cut heat shields, lined with gold heat reflective material 2 x laser-cut air ramps integrated into the heat shields High-quality silicone couplings and OEM hose clamps Parts certificate The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT BMW M5 e1*2007/46*1828*.. DE/AT BMW M5 Competition e1*2007/46*1828*.. DE/AT BMW M8 e1*2007/46*2019*.. DE/AT BMW M8 Competition e1*2007/46*2019*.. Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction BMW 5 Series (F90)M5 441kW / 600hp4395cm³S63 B44 B09.17 - BMW 8 Series (F91/F92/F93)M8 441kW / 600hp4395cm³S63 B44 B07.19 -

The intercooler for F90 and F92 knows how to impress and will certainly not disappoint you. ColourThe intercooler comes in a classic, appealing black that matches any vehicle colour and rounds off the overall appearance of your car. InstallationThe installation of our intercooler is as simple as the original part. It's a direct replacement, which means you don't have to follow complicated instructions or buy additional parts. MaterialThe intercooler is made of robust and durable aluminium. This material is lightweight yet highly resistant to high temperatures, making it ideal for the requirements of an intercooler. Compatible vehicles:BMW 5 (G30, F90) M5 2017-2023BMW 5 (G30, F90) M5 CS 2021-2022BMW 5 (G30, F90) M5 Competition 2018-2023BMW 8 Convertible (G14, F91) M8 since 2019BMW 8 Convertible (G14, F91) M8 Competition Since 2019BMW 8 Coupe (G15, F92) M8 Since 2019BMW 8 Coupe (G15, F92) M8 Competition Since 2019BMW 8 Gran Coupe (G16, F93) M8 Since 2019BMW 8 Gran Coupe (G16, F93) M8 Competition Since 2019

Facts: Material: CarbonManufacturer: Eventuri Expert opinion: Material expertise Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeBaujahr BMW 5er (F10)M5412kW / 560hp4395cm³S63 B44 B09.11 - 10.16

KW V4 coilover suspension - State of the Art With the new KW V4 with its stainless steel or aluminium coilover struts, you give your super sports car the necessary reserves to further increase the driving dynamics. The three-way adjustable high-performance dampers with their independent adjustment of the rebound, low-speed and high-speed compression damping are based on the successful racing technology of the multiple overall winner of the ADAC Zurich 24h Race Nürburgring and, depending on the vehicle-specific version, have aluminium support bearings. The new KW V4 is developed exclusively for selected high-performance vehicles, which can be moved more safely at the limits of driving dynamics thanks to our KW suspension technology. - 3-way adjustable high-performance dampers with stainless steel coilover struts - Separate and independent damper adjustment in: - Rebound damping with 16 exact clicks + (firmer) / - (more comfortable) - Low-speed compression damping with 6 exact clicks + (firmer) / - (more comfortable) - High-speed compression damping with 14 exact clicks + (firmer) / - (more comfortable) - Two basic set-ups ex works with comfort setting and performance setting - Depending on the vehicle, aluminium support bearings are an integral part of the scope of delivery Please note the conditions and instructions for this product: - VA + HA height-adjustable (coilover struts) - Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible. - Vehicles with electronic damper control must be decommissioned. Electronics kit for decommissioning is included in the scope of delivery for the “YES” article variant. - Variant 4 / Variant 5 Suspension struts / dampers made of aluminium or combined on each axle made of aluminium and stainless steel Technical information: Lowering VA/HA (mm): 15-30/10-30 Design: V4 Adjustable rebound and compression damping Material: Aluminium Adjustment VA/HA: thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive BMW 5 Series (G30, F90) F5LM, G5L 09/2016- M5 notchback petrol 441 KW 4395 ccm 8 all-wheel drive BMW 5 Series (G30, F90) F5LM, G5L 09/2016- M5 Competition notchback petrol 460 KW 4395 ccm 8 all-wheel drive BMW 5 Series (G30, F90) F5LM, G5L 09/2016- M5 CS notchback petrol 467 KW 4395 ccm 8 all-wheel drive

H&R lowering springs for the G90 Sedan H&R sport spring sets are the ideal solution if you want to optimize the handling of your vehicle and achieve a sporty look while maintaining the standard driving comfort. Details: Lowering front/rear: 20/10 mm Axle load: front up to 1475 kg / rear up to 1550 kg For standard dampers with and without electric adjustment With type part approval Product advantages: Sporty look and performance Lowering of the vehicle's center of gravity Linear or progressive suspension characteristics Can be combined with standard or retrofit dampers Optimized driving dynamics With ABE or parts certificate Surface protection through powder coating Developed and manufactured in Germany Compatible vehicles: BMW M5 G90 (Sedan) 4.4l 535kW plug-in hybrid all-wheel drive (585 hp)

H&R lowering springs for the G99 Touring H&R sport spring sets are the ideal solution if you want to optimize the handling of your vehicle and achieve a sporty look while maintaining the standard driving comfort. Details: Lowering front/rear: 20/10 mm Axle load: front up to 1475 kg / rear up to 1670 kg For standard dampers with and without electric adjustment With type part approval Product advantages: Sporty look and performance Lowering of the vehicle's center of gravity Linear or progressive suspension characteristics Can be combined with standard or retrofit dampers Optimized driving dynamics With ABE or parts certificate Surface protection through powder coating Developed and manufactured in Germany Compatible vehicles: BMW M5 G99 (Touring) 4.4l 535kW plug-in hybrid all-wheel drive (585 hp)

H&R lowering springs for F90 models from 2018 (VA20-30/HA20-30mm) H&R sports spring kits are the ideal solution if you want to optimize the handling of your vehicle and achieve a sporty look while maintaining the standard driving comfort. Details:Lowering VA/HA Sedan: 30/30mmLowering VA/HA Competition Sedan: 20/20mmSuspension: for vehicles with electric damper controlType of approval: with general operating permit (ABE) Product advantages:Sporty look and performanceLowering of the vehicle's center of gravityLinear or progressive suspension characteristicsCan be combined with standard or retrofit dampersOptimized driving dynamicsSurface protection through powder coatingMade in Germany Compatible vehicles:BMW M5 Sedan F90 type F5LM only with adaptive damper control 2018- front axle 30mm / rear axle 30mmBMW M5 Competition Sedan F90 type F5LM, only with adaptive damper control 2018- front axle 20mm / rear axle 20mm

Eibach Pro-Kit performance suspension springs for front and rear axle E10-20-041-01-22 The Eibach Pro-Kit lowering springs are the ideal solution for your vehicle, as the kit lowers the centre of gravity, reduces rebound when accelerating, reduces body roll when cornering and dips when braking. As a result, understeer and oversteer no longer occur. Lowering the vehicle with the Pro-Kit springs reduces the standard distance between the tyres and the wheel arch and gives the vehicle a sporty look. In addition, the handling of the vehicle is maximised. The Eibach Pro-Kits are designed by Eibach suspension engineers and testing experts to deliver a combination of sporty looks and performance without compromising on safety or ride quality. - Developed and tested for combination with standard and aftermarket dampers- Component of the Eibach Pro system- Top performance handling- Lowers the vehicle's centre of gravity by up to 40 mm (depending on the vehicle)- Spring design for traction and attraction- Progressive suspension characteristics- Performance handling- ABE or parts certificate Note: Only for vehicles without levelling control. Information:- Lowering front axle: approx. 25mm- Lowering rear axle: approx. 20mm- Type of approval: with expert opinion- Illustration may differ from the original Compatible vehicles:- Axle load front axle: up to 1215kg- Axle load rear axle: up to 1260kg- EC type approval number: e1*2007/46*1688*..- Only for vehicles without levelling system BMW 5 (F90) M5 441kW / 600PS 7909-ABWBMW 5 (F90) M5 Competition 460kW / 625hp 7909-ABV

Eibach Pro-Kit performance suspension springs for front and rear axle E10-20-022-09-22 The Eibach Pro-Kit lowering springs are the ideal solution for your vehicle, as the kit lowers the centre of gravity, reduces rebound when accelerating, reduces body roll when cornering and dips when braking. As a result, understeer and oversteer no longer occur. Lowering the vehicle with the Pro-Kit springs reduces the standard distance between the tyres and the wheel arch and gives the vehicle a sporty look. In addition, the handling of the vehicle is maximised. The Eibach Pro-Kits are designed by Eibach suspension engineers and test experts to deliver a combination of sporty looks and performance without compromising on safety or ride quality. - Developed and tested for combination with standard and aftermarket dampers- Component of the Eibach Pro system- Top performance handling- Lowers the vehicle's centre of gravity by up to 40 mm (depending on the vehicle)- Spring design for traction and attraction- Progressive suspension characteristics- Performance handling- ABE or parts certificate Note: Only for vehicles without levelling control. Information:- Lowering front axle: approx. 25mm- Lowering rear axle: approx. 25mm- Type of approval: with expert opinion- Illustration may differ from the original Compatible vehicles:- Axle load front axle: up to 1180kg- Axle load rear axle: up to 1260kg- EC type approval number: e1*2007/46*0361*..- Only for vehicles without levelling system BMW 5 (F10) M5 412kW / 560hp 7909-AAYBMW 5 (F10) M5 Competition 423kW / 575hp 7909-ABCBMW 5 (F10) M5 30th Anniversary 441kW / 600PS 7909-ABI

Want to add a little extra kick to your interior? Look no further as we have just released our replacement bright red M button for selected E-Series vehicles. This button is made from precision ABS plastic and finished with a durable, UV and scratch resistant clear coat to ensure a long life in daily use. Please note that this product is only suitable for M-Series vehicles. Compatible vehicles:ALPINA    B3 (E90)    Bi-Turbo    2007-2010ALPINA    B3 (E90)    S Bi-Turbo    2010-2013ALPINA    B3 Cabriolet (E93)    S Bi-Turbo    2010-2013BMW    1 (E81)    116 d    2008-2011BMW    1 (E81)    116 i    2007-2011BMW    1 (E81)    116 i    2008-2011BMW    1 (E81)    118 d    2006-2011BMW    1 (E81)    118 i    2006-2011BMW    1 (E81)    120 d    2007-2011BMW    1 (E81)    120 i    2007-2012BMW    1 (E81)    123 d    2007-2011BMW    1 (E81)    130 i    2006-2011BMW    1 (E87)    116 d    2009-2011BMW    1 (E87)    116 i    2004-2011BMW    1 (E87)    118 d    2004-2011BMW    1 (E87)    118 i    2004-2011BMW    1 (E87)    120 d    2004-2011BMW    1 (E87)    120 i    2004-2011BMW    1 (E87)    123 d    2007-2011BMW    1 (E87)    130 i    2005-2011BMW    1 Cabriolet (E88)    118 d    2008-2013BMW    1 Cabriolet (E88)    118 i    2008-2013BMW    1 Cabriolet (E88)    120 d    2008-2013BMW    1 Cabriolet (E88)    120 i    2007-2013BMW    1 Cabriolet (E88)    123 d    2008-2013BMW    1 Cabriolet (E88)    125 i    2007-2013BMW    1 Cabriolet (E88)    128 i    2007-2013BMW    1 Cabriolet (E88)    135 i    2008-2013BMW    1 Coupe (E82)    118 d    2009-2013BMW    1 Coupe (E82)    120 d    2007-2013BMW    1 Coupe (E82)    120 i    2007-2013BMW    1 Coupe (E82)    123 d    2007-2013BMW    1 Coupe (E82)    125 i    2008-2013BMW    1 Coupe (E82)    135 i    2007-2013BMW    1 Coupe (E82)    M    2011-2012BMW    3 (E36)    316 i    1991-1998BMW    3 (E36)    318 i    1993-1998BMW    3 (E36)    318 is    1993-1998BMW    3 (E36)    318 tds    1995-1998BMW    3 (E36)    320 i    1991-1998BMW    3 (E36)    323 i    1995-1998BMW    3 (E36)    325 i    1990-1995BMW    3 (E36)    325 td    1991-1998BMW    3 (E36)    325 tds    1993-1998BMW    3 (E36)    328 i    1995-1998BMW    3 (E36)    M3 3.0    1994-1995BMW    3 (E36)    M3 3.2    1995-1998BMW    3 (E46)    316 i    1998-2005BMW    3 (E46)    318 d    2001-2005BMW    3 (E46)    318 i    1997-2005BMW    3 (E46)    320 d    1998-2005BMW    3 (E46)    320 i    1998-2005BMW    3 (E46)    323 i    1998-2000BMW    3 (E46)    325 i    2000-2005BMW    3 (E46)    325 xi    2000-2005BMW    3 (E46)    328 i    1998-2000BMW    3 (E46)    330 d    1999-2005BMW    3 (E46)    330 i    2000-2005BMW    3 (E46)    330 xd    2000-2004BMW    3 (E46)    330 xi    2000-2005BMW    3 (E90)    316 d    2009-2011BMW    3 (E90)    316 i    2005-2011BMW    3 (E90)    318 d    2005-2011BMW    3 (E90)    318 i    2005-2011BMW    3 (E90)    320 d    2004-2011BMW    3 (E90)    320 d xDrive    2008-2011BMW    3 (E90)    320 i    2004-2011BMW    3 (E90)    320 si    2005-2006BMW    3 (E90)    323 i    2005-2011BMW    3 (E90)    325 d    2006-2011BMW    3 (E90)    325 i    2004-2011BMW    3 (E90)    325 i xDrive    2008-2011BMW    3 (E90)    325 xi    2005-2008BMW    3 (E90)    328 i    2006-2011BMW    3 (E90)    330 d    2005-2011BMW    3 (E90)    330 d xDrive    2008-2011BMW    3 (E90)    330 i    2004-2011BMW    3 (E90)    330 i xDrive    2008-2011BMW    3 (E90)    330 xd    2005-2008BMW    3 (E90)    330 xi    2005-2008BMW    3 (E90)    335 d    2006-2011BMW    3 (E90)    335 i    2006-2011BMW    3 (E90)    335 i xDrive    2008-2011BMW    3 (E90)    335 xi    2006-2008BMW    3 (E90)    M3    2007-2011BMW    3 (E90)    M3 CRT    2011-2011BMW    3 Cabriolet (E36)    318 i    1994-1999BMW    3 Cabriolet (E36)    320 i    1993-1999BMW    3 Cabriolet (E36)    323 i    1995-1999BMW    3 Cabriolet (E36)    325 i    1993-1995BMW    3 Cabriolet (E36)    328 i    1995-1999BMW    3 Cabriolet (E36)    M3 3.0    1994-1995BMW    3 Cabriolet (E36)    M3 3.2    1996-1999BMW    3 Cabriolet (E46)    318 Ci    2000-2007BMW    3 Cabriolet (E46)    320 Cd    2005-2007BMW    3 Cabriolet (E46)    320 Ci    2000-2007BMW    3 Cabriolet (E46)    323 Ci    2000-2000BMW    3 Cabriolet (E46)    325 Ci    2000-2006BMW    3 Cabriolet (E46)    330 Cd    2005-2007BMW    3 Cabriolet (E46)    330 Ci    2000-2006BMW    3 Cabriolet (E46)    M3    2001-2006BMW    3 Cabriolet (E93)    318 i    2010-2013BMW    3 Cabriolet (E93)    320 d    2007-2013BMW    3 Cabriolet (E93)    320 i    2006-2013BMW    3 Cabriolet (E93)    323 i    2007-2011BMW    3 Cabriolet (E93)    325 d    2007-2013BMW    3 Cabriolet (E93)    325 i    2006-2013BMW    3 Cabriolet (E93)    330 d    2007-2013BMW    3 Cabriolet (E93)    330 i    2007-2013BMW    3 Cabriolet (E93)    335 i    2006-2013BMW    3 Cabriolet (E93)    M3    2008-2013BMW    3 Compact (E36)    316 g    1996-2000BMW    3 Compact (E36)    316 i    1994-2000BMW    3 Compact (E36)    318 tds    1995-2000BMW    3 Compact (E36)    318 ti    1994-1999BMW    3 Compact (E36)    323 ti    1997-2000BMW    3 Compact (E46)    316 ti    2001-2005BMW    3 Compact (E46)    318 td    2003-2005BMW    3 Compact (E46)    318 ti    2001-2004BMW    3 Compact (E46)    320 td    2001-2005BMW    3 Compact (E46)    325 ti    2001-2004BMW    3 Coupe (E36)    316 i    1993-1998BMW    3 Coupe (E36)    318 is    1992-1999BMW    3 Coupe (E36)    320 i    1991-1998BMW    3 Coupe (E36)    323 i    1995-1999BMW    3 Coupe (E36)    325 i    1991-1995BMW    3 Coupe (E36)    325 is    1991-1995BMW    3 Coupe (E36)    328 i    1995-1999BMW    3 Coupe (E36)    M3 3.0    1992-1995BMW    3 Coupe (E36)    M3 3.2    1995-1998BMW    3 Coupe (E46)    316 Ci    2000-2006BMW    3 Coupe (E46)    318 Ci    1999-2006BMW    3 Coupe (E46)    320 Cd    2003-2006BMW    3 Coupe (E46)    320 Ci    1999-2006BMW    3 Coupe (E46)    323 Ci    1999-2000BMW    3 Coupe (E46)    325 Ci    2000-2006BMW    3 Coupe (E46)    328 Ci    1998-2000BMW    3 Coupe (E46)    330 Cd    2003-2006BMW    3 Coupe (E46)    330 Ci    2000-2006BMW    3 Coupe (E46)    330 xi    2000-2006BMW    3 Coupe (E46)    M3    2000-2006BMW    3 Coupe (E46)    M3 CSL    2003-2003BMW    3 Coupe (E92)    316 i    2007-2013BMW    3 Coupe (E92)    318 i    2010-2013BMW    3 Coupe (E92)    320 d    2006-2013BMW    3 Coupe (E92)    320 d xDrive    2008-2013BMW    3 Coupe (E92)    320 i    2007-2013BMW    3 Coupe (E92)    323 i    2006-2012BMW    3 Coupe (E92)    325 d    2007-2013BMW    3 Coupe (E92)    325 i    2006-2013BMW    3 Coupe (E92)    325 i xDrive    2008-2013BMW    3 Coupe (E92)    325 xi    2006-2010BMW    3 Coupe (E92)    328 i    2006-2013BMW    3 Coupe (E92)    328 i xDrive    2008-2013BMW    3 Coupe (E92)    330 d    2006-2013BMW    3 Coupe (E92)    330 d xDrive    2010-2013BMW    3 Coupe (E92)    330 i    2006-2013BMW    3 Coupe (E92)    330 i xDrive    2010-2013BMW    3 Coupe (E92)    330 xd    2006-2010BMW    3 Coupe (E92)    330 xi    2006-2010BMW    3 Coupe (E92)    335 d    2006-2013BMW    3 Coupe (E92)    335 i    2006-2013BMW    3 Coupe (E92)    335 i xDrive    2008-2013BMW    3 Coupe (E92)    335 xi    2007-2010BMW    3 Coupe (E92)    M3    2007-2013BMW    3 Coupe (E92)    M3 GTS    2007-2013BMW    3 Touring (E36)    316 i    1997-1999BMW    3 Touring (E36)    318 i    1995-1999BMW    3 Touring (E36)    318 tds    1995-1999BMW    3 Touring (E36)    320 i    1995-1999BMW    3 Touring (E36)    323 i    1995-1999BMW    3 Touring (E36)    325 tds    1995-1999BMW    3 Touring (E36)    328 i    1995-1999BMW    3 Touring (E46)    316 i    2002-2005BMW    3 Touring (E46)    318 d    2002-2005BMW    3 Touring (E46)    318 i    1999-2005BMW    3 Touring (E46)    320 d    2000-2005BMW    3 Touring (E46)    320 i    1999-2005BMW    3 Touring (E46)    323 i    1999-2000BMW    3 Touring (E46)    325 i    2000-2005BMW    3 Touring (E46)    325 xi    2000-2005BMW    3 Touring (E46)    328 i    1999-2000BMW    3 Touring (E46)    330 d    1999-2005BMW    3 Touring (E46)    330 i    2000-2005BMW    3 Touring (E46)    330 xd    2000-2005BMW    3 Touring (E46)    330 xi    2000-2005BMW    3 Touring (E91)    316 i    2008-2012BMW    3 Touring (E91)    318 d    2005-2012BMW    3 Touring (E91)    318 i    2006-2012BMW    3 Touring (E91)    320 d    2004-2012BMW    3 Touring (E91)    320 d    2007-2012BMW    3 Touring (E91)    320 d xDrive    2008-2012BMW    3 Touring (E91)    320 d xDrive    2010-2012BMW    3 Touring (E91)    320 i    2005-2012BMW    3 Touring (E91)    323 i    2006-2008BMW    3 Touring (E91)    325 d    2006-2012BMW    3 Touring (E91)    325 i    2004-2012BMW    3 Touring (E91)    325 i xDrive    2008-2012BMW    3 Touring (E91)    325 xi    2005-2008BMW    3 Touring (E91)    330 d    2004-2012BMW    3 Touring (E91)    330 d xDrive    2009-2012BMW    3 Touring (E91)    330 i    2005-2012BMW    3 Touring (E91)    330 i xDrive    2007-2012BMW    3 Touring (E91)    330 xd    2005-2012BMW    3 Touring (E91)    330 xi    2005-2012BMW    3 Touring (E91)    335 d    2006-2012BMW    3 Touring (E91)    335 i    2006-2012BMW    3 Touring (E91)    335 i xDrive    2008-2012BMW    3 Touring (E91)    335 xi    2007-2008BMW    5 (E34)    518 i    1989-1995BMW    5 (E34)    520 i    1987-1990BMW    5 (E34)    520 i 24V    1990-1995BMW    5 (E34)    524 td    1988-1991BMW    5 (E34)    525 i    1988-1990BMW    5 (E34)    525 i 24V    1990-1995BMW    5 (E34)    525 iX 24V    1991-1995BMW    5 (E34)    525 td    1993-1995BMW    5 (E34)    525 tds    1991-1995BMW    5 (E34)    530 i    1988-1990BMW    5 (E34)    530 i V8    1992-1995BMW    5 (E34)    535 i    1987-1993BMW    5 (E34)    540 i V8    1992-1995BMW    5 (E34)    M5    1988-1995BMW    5 (E60)    520 d    2005-2009BMW    5 (E60)    520 i    2003-2010BMW    5 (E60)    523 i    2004-2009BMW    5 (E60)    525 d    2004-2010BMW    5 (E60)    525 d xDrive    2008-2009BMW    5 (E60)    525 i    2003-2010BMW    5 (E60)    525 i xDrive    2008-2010BMW    5 (E60)    525 xd    2007-2008BMW    5 (E60)    525 xi    2005-2009BMW    5 (E60)    528 i    2007-2009BMW    5 (E60)    530 d    2002-2009BMW    5 (E60)    530 d xDrive    2007-2009BMW    5 (E60)    530 i    2001-2010BMW    5 (E60)    530 i xDrive    2008-2009BMW    5 (E60)    530 xd    2005-2007BMW    5 (E60)    530 xi    2004-2009BMW    5 (E60)    535 d    2004-2010BMW    5 (E60)    535 i    2006-2009BMW    5 (E60)    540 i    2005-2009BMW    5 (E60)    545 i    2003-2005BMW    5 (E60)    550 i    2005-2009BMW    5 (E60)    M5    2004-2009BMW    5 Touring (E34)    518 g    1996-1996BMW    5 Touring (E34)    518 i    1993-1996BMW    5 Touring (E34)    520 i    1991-1996BMW    5 Touring (E34)    525 i    1991-1996BMW    5 Touring (E34)    525 ix    1992-1996BMW    5 Touring (E34)    525 td    1993-1996BMW    5 Touring (E34)    525 tds    1991-1996BMW    5 Touring (E34)    530 i    1992-1996BMW    5 Touring (E34)    540 i    1993-1996BMW    5 Touring (E34)    M5    1992-1995BMW    5 Touring (E61)    520 d    2005-2010BMW    5 Touring (E61)    520 i    2007-2010BMW    5 Touring (E61)    523 i    2004-2010BMW    5 Touring (E61)    525 d    2004-2010BMW    5 Touring (E61)    525 d xDrive    2008-2010BMW    5 Touring (E61)    525 i    2004-2010BMW    5 Touring (E61)    525 i xDrive    2008-2010BMW    5 Touring (E61)    525 xd    2007-2008BMW    5 Touring (E61)    525 xi    2005-2010BMW    5 Touring (E61)    530 d    2004-2010BMW    5 Touring (E61)    530 d xDrive    2007-2010BMW    5 Touring (E61)    530 i    2004-2010BMW    5 Touring (E61)    530 i xDrive    2008-2010BMW    5 Touring (E61)    530 xd    2005-2007BMW    5 Touring (E61)    530 xi    2005-2010BMW    5 Touring (E61)    535 d    2004-2010BMW    5 Touring (E61)    545 i    2004-2010BMW    5 Touring (E61)    550 i    2005-2010BMW    5 Touring (E61)    M5    2007-2010BMW    6 (E63)    630 i    2004-2010BMW    6 (E63)    635 d    2007-2010BMW    6 (E63)    645 Ci    2003-2005BMW    6 (E63)    650 i    2005-2010BMW    6 (E63)    M    2005-2010BMW    6 Cabriolet (E64)    630 i    2004-2010BMW    6 Cabriolet (E64)    635 d    2007-2010BMW    6 Cabriolet (E64)    645 Ci    2004-2005BMW    6 Cabriolet (E64)    650 i    2005-2010BMW    6 Cabriolet (E64)    M6    2006-2010BMW    7 (E65, E66, E67)    730 Ld    2005-2008BMW    7 (E65, E66, E67)    730 d    2002-2008BMW    7 (E65, E66, E67)    730 i, Li    2003-2008BMW    7 (E65, E66, E67)    735 i    2005-2009BMW    7 (E65, E66, E67)    735 i, Li    2001-2005BMW    7 (E65, E66, E67)    740 d    2002-2005BMW    7 (E65, E66, E67)    740 i, Li    2005-2008BMW    7 (E65, E66, E67)    745 d    2005-2008BMW    7 (E65, E66, E67)    745 i, Li    2001-2005BMW    7 (E65, E66, E67)    750 i, Li    2005-2008BMW    7 (E65, E66, E67)    760 i, Li    2003-2008BMW    7 (F01, F02, F03, F04)    740 i, Li    2008-2012BMW    X1 (E84)    sDrive 16 d    2012-2015BMW    X1 (E84)    sDrive 16 i    2013-2015BMW    X1 (E84)    sDrive 18 d    2009-2015BMW    X1 (E84)    sDrive 18 i    2010-2015BMW    X1 (E84)    sDrive 20 d    2009-2015BMW    X1 (E84)    sDrive 20 i    2011-2015BMW    X1 (E84)    sDrive 28 i    2012-2015BMW    X1 (E84)    xDrive 18 d    2009-2015BMW    X1 (E84)    xDrive 20 d    2009-2015BMW    X1 (E84)    xDrive 20 i    2011-2015BMW    X1 (E84)    xDrive 23 d    2009-2015BMW    X1 (E84)    xDrive 25 d    2009-2015BMW    X1 (E84)    xDrive 25 i    2010-2011BMW    X1 (E84)    xDrive 28 i    2009-2015BMW    X1 (E84)    xDrive 28 i Flex    2011-2015BMW    X3 (E83)    2.0 d    2004-2007BMW    X3 (E83)    2.0 i    2005-2008BMW    X3 (E83)    2.0 sd    2007-2008BMW    X3 (E83)    2.5 i    2004-2006BMW    X3 (E83)    2.5 si    2006-2008BMW    X3 (E83)    2.5 si xDrive    2006-2008BMW    X3 (E83)    3.0 d    2004-2008BMW    X3 (E83)    3.0 i xDrive    2003-2006BMW    X3 (E83)    3.0 sd    2006-2008BMW    X3 (E83)    3.0 si    2006-2008BMW    X3 (E83)    xDrive 18 d    2008-2011BMW    X3 (E83)    xDrive 20 d    2008-2010BMW    X3 (E83)    xDrive 20 i    2008-2011BMW    X3 (E83)    xDrive 25 i    2008-2010BMW    X3 (E83)    xDrive 30 d    2008-2010BMW    X3 (E83)    xDrive 30 i    2008-2010BMW    X3 (E83)    xDrive 35 d    2008-2011BMW    X5 (E70)    3.0 3.0d    2007-2008BMW    X5 (E70)    3.0 d    2006-2008BMW    X5 (E70)    3.0 sd    2007-2008BMW    X5 (E70)    3.0 si    2006-2008BMW    X5 (E70)    4.8 i xDrive    2006-2008BMW    X5 (E70)    M    2009-2013BMW    X5 (E70)    M 50 d    2011-2013BMW    X5 (E70)    xDrive 30 d    2008-2013BMW    X5 (E70)    xDrive 30 i    2007-2012BMW    X5 (E70)    xDrive 35 d    2008-2013BMW    X5 (E70)    xDrive 35 i    2010-2013BMW    X5 (E70)    xDrive 40 d    2010-2013BMW    X5 (E70)    xDrive 40 i    2012-2013BMW    X5 (E70)    xDrive 48 i    2008-2010BMW    X5 (E70)    xDrive 50 i    2010-2013BMW    X6 (E71, E72)    ActiveHybrid    2009-2011BMW    X6 (E71, E72)    M    2009-2014BMW    X6 (E71, E72)    M 50 d    2011-2014BMW    X6 (E71, E72)    xDrive 30 d    2008-2014BMW    X6 (E71, E72)    xDrive 35 d    2008-2010BMW    X6 (E71, E72)    xDrive 35 i    2007-2014BMW    X6 (E71, E72)    xDrive 40 d    2009-2014BMW    X6 (E71, E72)    xDrive 50 i    2007-2014BMW    Z4 Coupe (E86)    3.0 si    2006-2008BMW    Z4 Coupe (E86)    M    2006-2008BMW    Z4 Roadster (E85)    2.0 i    2005-2009BMW    Z4 Roadster (E85)    2.2 i    2003-2005BMW    Z4 Roadster (E85)    2.5 i    2002-2009BMW    Z4 Roadster (E85)    2.5 si    2005-2009BMW    Z4 Roadster (E85)    3.0 i    2002-2005BMW    Z4 Roadster (E85)    3.0 si    2006-2008BMW    Z4 Roadster (E85)    M    2006-2008BMW    Z4 Roadster (E89)    sDrive 18 i    2013-2016BMW    Z4 Roadster (E89)    sDrive 20 i    2011-2016BMW    Z4 Roadster (E89)    sDrive 23 i    2009-2011BMW    Z4 Roadster (E89)    sDrive 28 i    2011-2016BMW    Z4 Roadster (E89)    sDrive 30 i    2009-2011BMW    Z4 Roadster (E89)    sDrive 35 i    2009-2016BMW    Z4 Roadster (E89)    sDrive 35 is    2010-2016

AutoTecknic M-Button for E60 / E63 / E64 Red Compatible vehicles:BMW 5 (E60) M5 2004-2009BMW 6 (E63) M 2005-2010BMW 6 Convertible (E64) M6 2006-2010

Looking to add a little more kick to your interior? Look no further, because we've just released our replacement bright red M1/M2 buttons for select F-Series vehicles. These buttons are manufactured from precision ABS plastic and finished with a hardwearing, UV and scratch resistant clear coat to ensure a long life in everyday use. Please note that this product is only suitable for M-series vehicles (see example image). Compatible vehicles:BMW 2 Coupe (F22, F87) M2 2015-2018BMW 2 Coupe (F22, F87) M2 CS 2019-2021BMW 2 Coupe (F22, F87) M2 Competition 2018-2021BMW 3 (F30, F80) M3 2014-2018BMW 3 (F30, F80) M3 CS 2018-2018BMW 3 (F30, F80) M3 Competition 2016-2018BMW 4 Convertible (F33, F83) M4 2014-2020BMW 4 Convertible (F33, F83) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 2014-2020BMW 4 Coupe (F32, F82) M4 CS 2017-2019BMW 4 Coupe (F32, F82) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 GTS 2016-2019BMW 5 (F10) M5 2011-2016BMW 5 (F10) M5 30th Anniversary 2014-2016BMW 5 (F10) M5 Competition 2013-2016BMW 6 Convertible (F12) M6 2012-2018BMW 6 Convertible (F12) M6 Competition 2013-2015BMW 6 Convertible (F12) M6 Competition 2015-2018BMW 6 Coupe (F13) M6 2012-2017BMW 6 Coupe (F13) M6 Competition 2013-2015BMW 6 Coupe (F13) M6 Competition 2015-2017BMW 6 Gran Coupe (F06) M6 2013-2018BMW 6 Gran Coupe (F06) M6 Competition 2013-2015BMW 6 Gran Coupe (F06) M6 Competition 2015-2018

The RKP carbon mirror caps for the F90 are definitely a highlight on your vehicle.They impress with their perfect fit and easy installation. Details:- Flawless fit- Extremely light- Clear lacquered and high-gloss polished Compatible vehicles:BMW M5 441kW/600PSBMW M5 Competition 460kW/625PS

The exterior mirror covers in glossy pre-preg carbon fibre give your standard mirror units a more premium look. Unlike regular carbon fibre, Pre-Preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Guaranteed fit- registration free Scope of delivery:- 1x pair of mirror caps Compatible vehicles:BMW M5 (G90)BMW M5 (G99)BMW 5 Series (G60)BMW 5 Series (G61)BMW 5 Series (G68)BMW i5 (G60)BMW 7 Series (G70) Note: This is NOT an original BMW product!

These exterior mirror covers in glossy pre-preg carbon fibre give your standard mirror units a more premium look. Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Guaranteed fit- registration free Scope of delivery:- 1x pair of mirror caps Compatible vehicles:BMW M5 (G90)BMW M5 (G99)BMW 5 Series (G60)BMW 5 Series (G61)BMW 5 Series (G68)BMW i5 (G60)BMW 7 Series (G70) Note: This is NOT an original BMW product!

The exterior mirror covers in glossy pre-preg carbon fibre give your standard mirror units a more aggressive and premium look.Quick and easy to fit, they are a styling option with perfect value for money to enhance the road presence of your vehicle. Unlike normal carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Guaranteed fit- registration free Scope of delivery:- 1x pair of mirror caps Compatible vehicles:BMW F90 M5 SaloonBMW F91 M8 ConvertibleBMW F92 M8 CoupeBMW F93 M8 Gran Coupé Note: This is NOT an original BMW product!

The SOOQOO mudguard extensions give your vehicle a distinctly sporty aggressiveness and a lot of presence on the road. Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:1x set of mudguard extensions in prepreg carbon fibre Compatible vehicles:BMW M5 G90BMW M5 G99Note: This is NOT an original BMW product!

Protect the factory oil cooler of your G90/G99 with the first-class complete oil cooler guard made of high-quality carbon fibre. Details:- 100% pure pre-preg carbon fibre construction- OEM style weave- High-gloss finish- perfect fit- registration free Scope of delivery:1x oil cooler guard Compatible vehicles:BMW M5 G90BMW M5 G99Note: This is NOT an original BMW product!

These PaddleShifterz aluminium paddle shifters fit the G-series steering wheel. They are a complete replacement for the OEM paddle shifters in your vehicle. They are finished in matt black and take the look of your vehicle interior to the next level. Ergonomics was a key consideration during development, as the paddle shifters should not only look good, but also function as expected. They have been designed to work better than the OEM paddle shifters. They are fitted as a direct replacement for the OEM paddle shifters. No additional adapters or mounting hardware are required.Simply remove the original part and insert the new paddle shifters - it's easy! Scope of delivery:- 2x paddle shifters (left and right) in matt black (powder-coated)- Made from aluminium, CNC-milled Compatible vehicles:BMW 1 Series (2019+, F40)BMW 2 Series (2020+, F44)BMW 3 Series (2018+, G20, G21)BMW 4 Series (2020+, G22, G23, G26)BMW 5 Series (2017+, G30, G31)BMW 7 Series (2015+, G11, G12)BMW 8 Series (2018+, G14, G15, G16)BMW M3/Competition (2021+, G80, G81)BMW M4/Competition (2021+, G82)BMW M5/M5/Competition (2017+, F90, F90 LCI)BMW M8 Competition (2018+, F91, F92, F93)BMW X3/X3M/Competition (2017+, G01, F97)BMW X4/X4M/Competition (2018+, G02, F98)BMW X5/X5M/Competition (2019+, G05, F95)BMW X6/X6M/Competition (2019+, G06, F96)BMW X7/X7M (2019+, G07)BMW Z4 G29Toyota Supra MK5

These PaddleShifterz aluminium paddle shifters fit the G-series steering wheel. They are a complete replacement for the OEM paddle shifters in your vehicle. They are finished in silver and take the look of your vehicle interior to the next level. Ergonomics was a key consideration during development, as the paddle shifters should not only look good, but also function as expected. They have been designed to work better than the OEM paddle shifters. They are fitted as a direct replacement for the OEM paddle shifters. No additional adapters or mounting hardware are required.Simply remove the original part and insert the new paddle shifters - it's easy! Scope of delivery:- 2x shift paddles (left and right) in silver- Made from aluminium, CNC-milled Compatible vehicles:BMW 1 Series (2019+, F40)BMW 2 Series (2020+, F44)BMW 3 Series (2018+, G20, G21)BMW 4 Series (2020+, G22, G23, G26)BMW 5 Series (2017+, G30, G31)BMW 7 Series (2015+, G11, G12)BMW 8 Series (2018+, G14, G15, G16)BMW M3/Competition (2021+, G80, G81)BMW M4/Competition (2021+, G82)BMW M5/M5/Competition (2017+, F90, F90 LCI)BMW M8 Competition (2018+, F91, F92, F93)BMW X3/X3M/Competition (2017+, G01, F97)BMW X4/X4M/Competition (2018+, G02, F98)BMW X5/X5M/Competition (2019+, G05, F95)BMW X6/X6M/Competition (2019+, G06, F96)BMW X7/X7M (2019+, G07)BMW Z4 G29Toyota Supra MK5

Introducing the ultimate upgrade for the F-Series: The Pre-preg carbon fibre paddle shifters, designed and manufactured in Germany. These high-quality paddle shifters are made from pre-impregnated carbon fibre, resulting in a stronger and more durable product. In addition, the lightweight design of these paddle shifters not only gives your car a sporty look, but also improves your driving experience with faster and more precise gear changes. Furthermore, the carbon fibre material is wear-resistant, ensuring the durability of these paddle shifters for years to come. Whether you're an avid racetrack fan or just want to add a touch of racing style to your vehicle, these paddle shifters are the perfect choice. Details:- Full replacement for the OEM paddle shifters- Manufactured using 2×2 woven and pre-impregnated carbon fibre- Full carbon fibre replacement, hollow design- Coated in gloss lacquered finish- Better ergonomics, our paddle shifters were developed using 3D scans of the OEM steering wheel to get the best fit- Developed and manufactured in Germany When developing these paddle shifters, we kept two things in mind:1. they had to look fantastic, as you spend a lot of time behind the wheel, it has to look good.2. obviously: ergonomics, they have to look good and work better than OEM. No matter where you interact with them, they work perfectly. Scope of delivery:- 2x paddle shifters (left and right)- Made from carbon fibre- available +/- colours: red, blue, white- Made in Germany Compatible vehicles:BMW 1 Series F20/F21BMW 2 Series F22/F23BMW 2 Series F45BMW 2 Series F87BMW 3 Series F30/F31BMW 3 Series F34BMW 3 Series F80BMW 4 Series F32/F33BMW 4 Series F82/83BMW 5 Series F07/F10/F11BMW 6 Series F06/F12/F13BMW i8BMW X1 F48 (from 2015)BMW X3 F25BMW X4 F26BMW X5 F15BMW X5 F85BMW X6 F16BMW X6 F86

We present the ultimate upgrade for the G-Series, F4X/F9X or Toyota Supra: The Pre-preg Carbon Paddle Shifters, developed and manufactured in Germany. These high-quality paddle shifters are made from pre-impregnated carbon fibre, resulting in a stronger and more durable product. In addition, the lightweight design of these paddle shifters not only gives your car a sporty look, but also improves your driving experience with faster and more precise gear changes. Furthermore, the carbon fibre material is wear-resistant, ensuring the durability of these paddle shifters for years to come. Whether you're an avid racetrack fan or just want to add a touch of racing style to your vehicle, these paddle shifters are the perfect choice. Details:- Full replacement for the OEM paddle shifters- Manufactured using 2×2 woven and pre-impregnated carbon fibre- Full carbon fibre replacement, hollow design- Coated in gloss lacquered finish- Better ergonomics, our paddle shifters were developed using 3D scans of the OEM steering wheel to get the best fit- Developed and manufactured in Germany When developing these paddle shifters, we kept two things in mind:1. they had to look fantastic, as you spend a lot of time behind the wheel, it has to look good.2. obviously: ergonomics, they have to look good and work better than OEM. No matter where you interact with them, they work perfectly. Scope of delivery:- 2x paddle shifters (left and right)- Made from carbon fibre Compatible vehicles:BMW 1 Series (2019+, F40)BMW 2 Series (2020+, F44)BMW 3 Series (2018+, G20, G21)BMW 4 Series (2020+, G22, G23, G26)BMW 5 Series (2017+, G30, G31)BMW 7 Series (2015+, G11, G12)BMW 8 Series (2018+, G14, G15, G16)BMW M3 Competition (2021+, G80, G81)BMW M4 Competition (2021+, G82)BMW M5/M5 Competition (2017+, F90, F90 LCI)BMW M8 Competition (2018+, F91, F92, F93)BMW X3/X3M Competition (2017+, G01, F97)BMW X4/X4M Competition (2018+, G02, F98)BMW X5/X5M Competition (2019+, G05, F95)BMW X6/X6M Competition (2019+, G06, F96)BMW X7/X7M (2019+, G07)BMW Z4 G29Toyota Supra MK5

Facts: Material: Carbon Manufacturer: Eventuri The Eventuri philosophy of challenging the standard for existing aftermarket solutions is also reflected in the panel filters. The best design, relentless testing to perfection and the latest prototyping methods result in an exceptional product. With the panel filters, the focus is on performance, which is guaranteed by CFD analyses, airflow tests, inlet temperatures and extensive dyno tests. Each panel filter is designed to fit into the OEM filter housings. Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction BMW 5 Series (F10)M5412kW / 560hp4395cm³S63 B44 B09.11 - 10.16 BMW 6 Series (F12/F13)M6412kW / 560hp4395cm³S63 B44 B03.12 - 06.18

Facts:- Plug & Play installation using illustrated installation instructions- Special wiring harness for your vehicle- High-quality electronics “Made In Germany”- Electronic components with product qualification for motor vehicles according to AEC-Q100 installed- Support from us as co-developer and manufacturer Scope of delivery:The scope of delivery includes the motorsport add-on module, an engine-specific wiring harness, illustrated installation instructions in DE/EN and a BYPASS connector, which you can use to restore your vehicle to series production. Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeYear of constructionBMW 5er (G90/G99)M5535kW / 727hp4395cm³S68 B44 A07.24 - LEGAL INFORMATION: THE INSTALLATION OF ADDITIONAL ELECTRONICS IS A STRUCTURAL MODIFICATION TO THE MANUFACTURER'S ELECTRONICS. WITHOUT REGISTRATION IN THE VEHICLE DOCUMENTS BY MEANS OF AN INDIVIDUAL CERTIFICATE FROM TÜV; DEKRA OR OTHER RECOGNIZED TESTING INSTITUTES, THE INSTALLATION WILL INVALIDATE THE OPERATING LICENSE. IF USED ON PUBLIC ROADS, THIS WILL RESULT IN THE LOSS OF INSURANCE COVER. WE DO NOT CURRENTLY HAVE A PARTS CERTIFICATE FOR YOUR VEHICLE. THEREFORE, THIS SYSTEM IS EXCLUSIVELY SUITABLE FOR MOTORSPORT. ATTENTION: IF YOU USE THE ADDITIONAL ELECTRONICS, YOU MAY LOSE YOUR WARRANTY CLAIMS AGAINST THE SELLER OR WARRANTY CLAIMS AGAINST THE MANUFACTURER. IF YOU HAVE ANY FURTHER QUESTIONS, PLEASE DO NOT HESITATE TO CONTACT US!

Facts:- Plug & Play installation using illustrated installation instructions- Special wiring harness for your vehicle- High-quality electronics “Made In Germany”- Electronic components with product qualification for motor vehicles according to AEC-Q100 installed- Support from us as co-developer and manufacturer Scope of delivery:The scope of delivery includes the motorsport add-on module, an engine-specific wiring harness, illustrated installation instructions in DE/EN and a BYPASS connector, which you can use to restore your vehicle to series production. Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeYear of constructionBMW 5er (F90 LCI)M5 Competition460kW / 625hp4395cm³S63 B44 B07.18 - LEGAL INFORMATION: THE INSTALLATION OF ADDITIONAL ELECTRONICS IS A STRUCTURAL MODIFICATION TO THE MANUFACTURER'S ELECTRONICS. WITHOUT REGISTRATION IN THE VEHICLE DOCUMENTS BY MEANS OF AN INDIVIDUAL CERTIFICATE FROM TÜV; DEKRA OR OTHER RECOGNIZED TESTING INSTITUTES, THE INSTALLATION WILL INVALIDATE THE OPERATING LICENSE. IF USED ON PUBLIC ROADS, THIS WILL RESULT IN THE LOSS OF INSURANCE COVER. WE DO NOT CURRENTLY HAVE A PARTS CERTIFICATE FOR YOUR VEHICLE. THEREFORE, THIS SYSTEM IS EXCLUSIVELY SUITABLE FOR MOTORSPORT. ATTENTION: IF YOU USE THE ADDITIONAL ELECTRONICS, YOU MAY LOSE YOUR WARRANTY CLAIMS AGAINST THE SELLER OR WARRANTY CLAIMS AGAINST THE MANUFACTURER. IF YOU HAVE ANY FURTHER QUESTIONS, PLEASE DO NOT HESITATE TO CONTACT US!

Facts:- Plug & Play installation using illustrated installation instructions- Special wiring harness for your vehicle- High-quality electronics “Made In Germany”- Electronic components with product qualification for motor vehicles according to AEC-Q100 installed- Support from us as co-developer and manufacturer Scope of delivery:The scope of delivery includes the motorsport add-on module, an engine-specific wiring harness, illustrated installation instructions in DE/EN and a BYPASS connector, which you can use to restore your vehicle to series production. Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeYear of constructionBMW 5er (F90)M5 CS467kW / 635hp4395cm³S63 B44 B03.21 - LEGAL INFORMATION: THE INSTALLATION OF ADDITIONAL ELECTRONICS IS A STRUCTURAL MODIFICATION TO THE MANUFACTURER'S ELECTRONICS. WITHOUT REGISTRATION IN THE VEHICLE DOCUMENTS BY MEANS OF AN INDIVIDUAL CERTIFICATE FROM TÜV; DEKRA OR OTHER RECOGNIZED TESTING INSTITUTES, THE INSTALLATION WILL INVALIDATE THE OPERATING LICENSE. IF USED ON PUBLIC ROADS, THIS WILL RESULT IN THE LOSS OF INSURANCE COVER. WE DO NOT CURRENTLY HAVE A PARTS CERTIFICATE FOR YOUR VEHICLE. THEREFORE, THIS SYSTEM IS EXCLUSIVELY SUITABLE FOR MOTORSPORT. ATTENTION: IF YOU USE THE ADDITIONAL ELECTRONICS, YOU MAY LOSE YOUR WARRANTY CLAIMS AGAINST THE SELLER OR WARRANTY CLAIMS AGAINST THE MANUFACTURER. IF YOU HAVE ANY FURTHER QUESTIONS, PLEASE DO NOT HESITATE TO CONTACT US!

The Performance intercooler kit is suitable for the following vehicles:BMW 525d 2004-2010 E60/61 130-145KW/177-197hp*BMW 530d 2003-2010 E60/61 160-173KW/218-235hp*BMW 535d 2004-2010 E60/E61 200-210KW/272-286hpBMW 635d 2006-2010 E63/E64 200-210KW/272-286hp*Adaptation to the module carrier necessary. Maximum power for your vehicle with our Performance intercooler kit! Your BMW deserves the best when it comes to performance and efficiency. Our Performance intercooler kit is the ultimate solution to unlock the full potential of your vehicle. Here are some impressive features of this kit: With net dimensions of 530 mm x 244 [134] mm x 150 [50] mm )= 13.5Liter and a stepped shape, our intercooler offers an impressive 87% larger flow area than the stock cooler. This means your engine gets more fresh air, resulting in improved combustion and increased performance. Our kit offers an astonishing 95% more charge air volume than the factory radiator. This results in increased power and a noticeable increase in torque. The high performance mesh offers excellent cooling properties and ensures that your engine always maintains the optimum operating temperature. Despite its impressive performance increase, our intercooler is lightweight at just 9.8 kg and does not add unnecessary weight to your vehicle. CAD designed free-form cast aluminum end boxes ensure the best possible internal airflow and minimize back pressure compared to the stock cooler. Installation is carried out by replacing the OEM intercooler and is easy to perform. The original charge air hoses can still be used, which makes installation even easier. All our intercoolers are coated with an anti-corrosion coating that also has heat conduction properties. This guarantees long-lasting and optimum cooling. We place great emphasis on quality and continuously monitor the manufacture of our products to ensure that they meet the highest standards. Take the opportunity to increase the performance and efficiency of your vehicle. Visit our website for more information and to order your kit. Advantages of the Wagner Tuning intercooler:- Improved cooling performance- 87% larger inflow area- 95% more charge air volume- Minimized back pressure- Plug & Play Scope of delivery:1 intercooler1 assembly instructionAttention: Not approved in the area of the StVZO.

The performance intercooler kit fits the following vehicles:BMW F07/F10/F11/F18 535i (x) (2009-2016)BMW F10/F11 518d (2013-2016)BMW F07/F10/F11 520d (x) (2010-2016)BMW F10/F11 525d (x) (2010-2016)BMW F07/F10/F11 530d (x) (2010-2016)BMW F07/F10/F11 535d (x) (2010-2016)BMW F06/F12/F13 640i (x) (2010-2016)BMW F06/F12/F13 640d (x) (2010-2016)BMW F01/F02 740i (2007-2012)BMW F01/F02 730d (x) (2007-2015)BMW F01/F02 740d (x) (2007-2015) Unleash the full power of your vehicle with our Performance Intercooler Kit! Your vehicle deserves the best, and our Performance Intercooler Kit will make sure you get just that. Here's what you can expect: With mesh dimensions of 570 mm x 302 mm x 100 mm (stepped), our intercooler offers an impressive 92% larger flow area compared to the factory intercooler. This means your engine gets more fresh air, resulting in a noticeable increase in power. Our kit offers an astonishing 97% more charge air volume than the stock radiator. This leads to improved combustion and ultimately more power and efficiency. Despite its impressive size, our intercooler weighs only 11.7 kg. The radiator's end boxes are made of cast aluminium and have been optimized for the best possible internal airflow using CAD designs with internal baffles. This ensures optimal airflow and minimizes back pressure. Our high performance mesh is specifically designed to provide excellent cooling characteristics. All our intercoolers have an anti-corrosion coating with excellent heat conduction properties to ensure long-lasting and optimal cooling. Installation is carried out by replacing the OEM intercooler and is simple to perform. No complex adjustments required. We subject all our products to rigorous quality control to ensure they meet the highest standards. Don't miss the chance to take the performance to a new level. Visit our website for more information and to order your kit. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 92% larger inflow area- 97% more charge air volume- flow-optimized- Plug & Play Scope of delivery:1 intercooler1 mounting material1 fitting instructions Attention: Not approved in the area of the StVZO.

Compatible vehicles:BMW F90 M5 441KW/600hp (2017+)BMW F90 M5 Competition 460KW/625hp (2018+)BMW F90 M5 CS 467KW/635hp (2021+)BMW F91/92/93 M8 441KW/600hp (2019+) Boost your model's performance to a new level with the Wagner Tuning high-performance intercooler! The 4.4-litre V8 biturbo engine (S63 B44T4) has an indirect charge air cooling circuit in which the charge air is cooled by a water-cooled charge air cooler. With our innovative high-performance intercooler from Wagner Tuning, you can replace the original intercooler and experience an impressive increase in performance. Our high-performance intercooler has a new type of performance mesh with dimensions of 192 mm x 156 mm x 128 mm. It has been specially developed for the high demands of the engine and offers an incredible 75 % more external mesh volume compared to the standard intercooler. The optimised ratio between the inner and outer cooling surface ensures maximum heat transfer and optimum internal airflow. The cast aluminium end boxes were designed using the latest CAD technology and optimised using CFD simulations. The result is outstanding cooling properties with minimal back pressure, ensuring optimum cooling of the supercharged air with a significant increase in performance. This kit is ideally suited even for demanding racing. To ensure a long-lasting cooling effect, all Wagner Tuning intercoolers are equipped with a thermally conductive anti-corrosion coating. Installation of the system is uncomplicated thanks to our detailed installation instructions and is carried out in plug & play style. Advantages:- Significantly improved cooling performance- More power and torque for your engine- Mechanical relief of the turbocharger- Additional WMI ports- 100 % pressure resistance- 100 % plug-and-play- Up to 4 years warranty Mains dimensions OEM intercooler:152 mm x 143 mm x 100 mmV = 2.19 litres Mains dimensions Wagner Tuning intercooler:192 mm x 156 mm x 128 mmV = 3.83 litres (+75%) Scope of delivery:2 intercoolers5 silicone air hoses1 mounting material Attention: Not authorised in the area of the StVZO.

The report includes the increase in rated power to 298kW (405hp).Note: Price errors/errors/changes reserved! Some vehicles require an additional OBD unlock. We will be happy to check this in advance using the chassis number.The purchase of the performance upgrade does not include registration in the vehicle documents. This must be purchased separately.To get the maximum performance from your vehicle, we recommend filling up with premium fuel (100/102 octane) before and after the optimisation.Compatible vehicles:VehicleTypePower outputEngine capacityEngineYear of construction BMW 1 Series (F20/F21)M135i235kW / 320hp240kW / 326hp2979ccN55 B30 A07.12 - 06.16 BMW 2 Series (F22/F23)M235i / xDrive235kW / 320hp240kW / 326hp2979ccN55 B30 A10.13 - 06.16 BMW 3 Series (F30/F31/F34)335i225kW / 306hp2979ccN55 B30 A11.11 - 06.16 BMW 4 Series (F32/F33/F36)435i225kW / 306hp2979ccN55 B30 A07.13 - 02.16 BMW 5 Series (F07/F10/F11)535i225kW / 306hp2979ccN55 B30 A01.09 - 02.17 BMW 6 Series (F06/F12/F13)640i235kW / 320hp2979ccN55 B30 A07.11 - 10.18 BMW 7 Series (F01/F02/F03/F04)740i235kW / 320hp2979ccN55 B30 A07.12 - 12.15 BMW X5 (F15)xDrive 35i225kW / 306hp2979ccN55 B30 A12.13 - 07.18 BMW X6 (F16)xDrive 35i225kW / 306hp2979ccN55 B30 A08.14 - 07.19

The certificate includes the increase in rated power to 515kW (700hp).Note: Price errors/errors/changes reserved! Some vehicles require an additional OBD unlock. We will be happy to check this in advance using the chassis number.The purchase of the performance upgrade does not include registration in the vehicle documents. This must be purchased separately.To get the maximum performance from your vehicle, we recommend filling up with premium fuel (100/102 octane) before and after the optimisation.Compatible vehicles:VehicleTypePower outputEngine capacityEngineYear of construction BMW 5 Series (F10)M5412kW / 560hp4395ccS63 B44 B09.11 - 10.16 BMW 6 Series (F06/F12/F13)M6412kW / 560hp4395ccS63 B44 B03.12 - 10.18 BMW X5 (F85)M423kW / 575hp4395ccS63 B44 B12.14 - 07.18 BMW X6 (F86)M423kW / 575hp4395ccS63 B44 B12.14 - 07.19

The report includes the increase in rated power to 536kW (729hp).Note: Price errors/errors/changes reserved! Some vehicles require an additional OBD unlock. We will be happy to check this in advance using the chassis number.The purchase of the performance upgrade does not include registration in the vehicle documents. This must be purchased separately.To get the maximum performance from your vehicle, we recommend filling up with premium fuel (100/102 octane) before and after the optimisation.Compatible vehicles:VehicleTypePower outputEngine capacityEngineYear of construction BMW 5 Series Coupe (F90)M5 Competition460kW / 625hp4395ccS63 B44 B07.18 - 10.23 BMW 8 Series Coupe (F91)M8 Competition460kW / 625hp4395ccS63 B44 B07.19 -

The G90 SOOQOO rear apron made of pre-preg carbon fiber gives your vehicle a distinctly sporty aggressiveness and gives it a lot of presence on the road.Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x front spoiler in prepreg carbon fibre Compatible vehicles:BMW M5 G90Note: This is NOT an original BMW product!

The G90 Performance rear diffuser made of Pre-Preg carbon fibre gives your vehicle a distinctly sporty aggressiveness and gives it a lot of presence on the road. Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x rear diffuser in prepreg carbon fibre Compatible vehicles:BMW M5 G90BMW M5 G99Note: This is NOT an original BMW product!

The SOOQOO rear diffuser made of carbon fibre gives your vehicle a distinctly sporty aggressiveness and a lot of presence on the road. Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x rear diffuser in prepreg carbon fibre Compatible vehicles:BMW M5 G90BMW M5 G99Note: This is NOT an original BMW product!

The SOOQOO rear diffuser made of pre-preg carbon fibre gives your vehicle a distinctly sporty aggressiveness and a lot of presence on the road. Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x rear diffuser in prepreg carbon fibre Compatible vehicles:BMW M5 G90BMW M5 G99Note: This is NOT an original BMW product!

A high-end kit for a high-end car. The new F90 gets a new, innovative look. The new AERO body kit from 3DDesign for the F90 fits seamlessly into the familiar, discreetly aggressive race style of the 3DDesign lines. The iconic design is complemented by a perfect fit and the usual uncompromising quality. The F90 spoiler is the real surprise in the body kit. There is no sign of the usual understatement with this aero spoiler. Steeply curved, the F90 spoiler is the most aggressive spoiler from 3DDesign to date. Curved far upwards, it is positioned directly in the airstream and provides the appropriate downforce. Performance spoiler for the F90, which is also a real visual upgrade! Pure luxury! Compatible vehicles:BMW 5 (G30, F90) 518 d 2018-2020BMW 5 (G30, F90) 518 d Mild-Hybrid 2020-2023BMW 5 (G30, F90) 520 d 2016-2023BMW 5 (G30, F90) 520 d Mild-Hybrid 2019-2023BMW 5 (G30, F90) 520 d Mild-Hybrid xDrive 2019-2023BMW 5 (G30, F90) 520 d xDrive 2016-2023BMW 5 (G30, F90) 520 i 2017-2023BMW 5 (G30, F90) 520 i Mild-Hybrid 2020-2023BMW 5 (G30, F90) 525 d 2017-2019BMW 5 (G30, F90) 530 d 2016-2020BMW 5 (G30, F90) 530 d Mild-Hybrid 2020-2023BMW 5 (G30, F90) 530 d Mild-Hybrid xDrive 2020-2023BMW 5 (G30, F90) 530 d xDrive 2016-2020BMW 5 (G30, F90) 530 e Plug-in Hybrid 2017-2023BMW 5 (G30, F90) 530 e Plug-in Hybrid xDrive 2017-2023BMW 5 (G30, F90) 530 i 2016-2020BMW 5 (G30, F90) 530 i Mild-Hybrid 2020-2023BMW 5 (G30, F90) 530 i Mild-Hybrid xDrive 2020-2023BMW 5 (G30, F90) 530 i xDrive 2016-2023BMW 5 (G30, F90) 540 d Mild-Hybrid xDrive 2020-2023BMW 5 (G30, F90) 540 d xDrive 2017-2020BMW 5 (G30, F90) 540 i 2016-2020BMW 5 (G30, F90) 540 i Mild-Hybrid 2020-2023BMW 5 (G30, F90) 540 i Mild-Hybrid xDrive 2020-2023BMW 5 (G30, F90) 540 i xDrive 2016-2020BMW 5 (G30, F90) 545 e Plug-in Hybrid xDrive 2020-2023BMW 5 (G30, F90) M 550 d xDrive 2017-2020BMW 5 (G30, F90) M 550 i xDrive 2017-2023BMW 5 (G30, F90) M5 2017-2023BMW 5 (G30, F90) M5 Competition 2018-2023  

The G90 rear spoiler made of Pre-Preg carbon fibre gives your vehicle a distinctly sporty aggressiveness and gives it a lot of presence on the road.Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x ducktail in prepreg carbon Compatible vehicles:BMW M5 G90BMW i5 G60BMW 5 Series G60Note: This is NOT an original BMW product!

The rear spoiler made of Pre-Preg carbon fibre gives your vehicle a distinctly sporty aggressiveness and gives it a lot of presence on the road.Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x ducktail in prepreg carbon Compatible vehicles:BMW M5 G90BMW i5 G60BMW 5 Series G60Note: This is NOT an original BMW product!

The SOOQOO carbon roof edge spoiler gives your vehicle a distinctly sporty aggressiveness and a strong presence on the road.Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x roof edge spoiler in prepreg carbon fibre Compatible vehicles:BMW M5 G99Note: This is NOT an original BMW product!

The SOOQOO roof edge spoiler made of Pre-Preg carbon fibre gives your vehicle a distinctly sporty aggressiveness and gives it a lot of presence on the road. Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x roof edge spoiler in prepreg carbon fibre Compatible vehicles:BMW M5 G90BMW 5 Series/i5 G60Note: This is NOT an original BMW product!

The roof antenna made of pre-preg carbon fibre gives your vehicle a very modern look. Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration free Scope of delivery:1x carbon roof antenna Compatible vehicles:BMW M5 G90BMW M5 G99BMW i5 G60BMW 5 Series G60BMW 5 Series G61BMW 5 Series G68BMW 7 Series G70Note: This is NOT an original BMW product!

Made from Aircraft Grade T-6061 Aluminum, the Evolve Gear Shift Paddle Set puts you back in control of your M Performance vehicle, more feel and ease of use make the Evolve Gear Shift Paddle Set the superior choice over OEM paddles. Designed specifically for the M Performance steering wheel, the sleek Evolve Paddle Set follows the curves and lines of the steering wheel. Available in two finishes to complement the interior of your vehicle, you have the choice between Titanium and Dark Anthracite. We designed these paddle shifters with the racetrack in mind, so you can easily engage gears regardless of steering angle.In addition, the OEM control unit is retained and the entire paddle is replaced, this is not a stick-on version. Fits all F-Series & G-Series vehicles with the latest Gen.3 M Performance steering wheel:G87 M2G80/G81 M3G82/G83 M4F90 M5F91/F92 M8F97 X3MF98 X4MG01 X3G02 X4G05 X5G06 X6G07 X7G30 5 Series

These PaddleShifterz aluminium paddle shifters fit the F-series steering wheel. They are a complete replacement for the OEM paddle shifters in your vehicle. They are finished in matte black and take the look of your vehicle's interior to the next level. The paddle shifters are 155% larger than the OEM paddle shifters and offer more shifting range for a better daily drive or for track days like on the Nordschleife (Nürburgring). These paddle shifters have been designed with ease of use as the main focus. Not only should they look fantastic, but you should be able to shift through the gears with them from any angle. They are a direct replacement for the original paddle shifters, no additional glue or screws are required.Simply remove the original part and insert the new paddle shifters - it's easy! Scope of delivery:- 2x paddle shifters (left and right) in matt black (powder-coated)- Made from 6061-grade aircraft aluminium, CNC-milled- +/- removed by CNC machine Compatible vehicles:BMW 1 Series F20/F21BMW 2 Series F22/F23BMW 2 Series F45BMW 2 Series F87BMW 3 Series F30/F31BMW 3 Series F34BMW 3 Series F80BMW 4 Series F32/F33BMW 4 Series F82/83BMW 5 Series F07/F10/F11BMW 6 Series F06/F12/F13BMW i8BMW X1 F48 (from 2015)BMW X3 F25BMW X4 F26BMW X5 F15BMW X5 F85BMW X6 F16BMW X6 F86

These PaddleShifterz aluminium paddle shifters fit the G-series steering wheel. They are a complete replacement for the OEM paddle shifters in your vehicle. They come in a glossy red colour and take the look of your vehicle interior to the next level. Ergonomics was a key consideration during development, as the paddle shifters should not only look good, but also function as expected. They have been designed to work better than the OEM paddle shifters. They are fitted as a direct replacement for the OEM paddle shifters. No additional adapters or mounting hardware are required.Simply remove the original part and insert the new paddle shifters - it's easy! Scope of delivery:- 2x shift paddles (left and right) in glossy red (powder-coated)- Made from aluminium, CNC-milled Compatible vehicles:BMW 1 Series (2019+, F40)BMW 2 Series (2020+, F44)BMW 3 Series (2018+, G20, G21)BMW 4 Series (2020+, G22, G23, G26)BMW 5 Series (2017+, G30, G31)BMW 7 Series (2015+, G11, G12)BMW 8 Series (2018+, G14, G15, G16)BMW M3/Competition (2021+, G80, G81)BMW M4/Competition (2021+, G82)BMW M5/M5/Competition (2017+, F90, F90 LCI)BMW M8 Competition (2018+, F91, F92, F93)BMW X3/X3M/Competition (2017+, G01, F97)BMW X4/X4M/Competition (2018+, G02, F98)BMW X5/X5M/Competition (2019+, G05, F95)BMW X6/X6M/Competition (2019+, G06, F96)BMW X7/X7M (2019+, G07)BMW Z4 G29Toyota Supra MK5

These PaddleShifterz aluminium paddle shifters fit the F-series steering wheel. They are a complete replacement for the OEM paddle shifters in your vehicle. They are finished in silver and take the look of your vehicle interior to the next level. The paddle shifters are 155% larger than the OEM paddle shifters and offer more shifting range for a better daily drive or for track days like on the Nordschleife (Nürburgring). These paddle shifters have been designed with ease of use as the main focus. Not only should they look fantastic, but you should be able to shift through the gears with them from any angle. They are a direct replacement for the original paddle shifters, no additional glue or screws are required.Simply remove the original part and insert the new paddle shifters - it's easy! Scope of delivery:- 2x paddle shifters (left and right) in silver (powder-coated)- Made from 6061-grade aircraft aluminium, CNC-milled- +/- removed by CNC machine Compatible vehicles:BMW 1 Series F20/F21BMW 2 Series F22/F23BMW 2 Series F45BMW 2 Series F87BMW 3 Series F30/F31BMW 3 Series F34BMW 3 Series F80BMW 4 Series F32/F33BMW 4 Series F82/83BMW 5 Series F07/F10/F11BMW 6 Series F06/F12/F13BMW i8BMW X1 F48 (from 2015)BMW X3 F25BMW X4 F26BMW X5 F15BMW X5 F85BMW X6 F16BMW X6 F86

These aluminum PaddleShifterz paddle shifters fit the F-Series steering wheel. They are a complete replacement for the OEM paddle shifters in your vehicle. They are finished in glossy red and take the look of your vehicle's interior to the next level. The paddle shifters are 155% larger than the OEM paddle shifters and offer more shifting range for a better daily drive or for track days like on the Nordschleife (Nürburgring). These paddle shifters have been designed with ease of use in mind. Not only should they look fantastic, but you should be able to shift through the gears with them from any angle. They are a direct replacement for the original paddle shifters, no additional glue or screws are required.Simply remove the original part and insert the new paddle shifters - it's easy! Scope of delivery:- 2x shift paddles (left and right) in glossy red (powder-coated)- Made from 6061-grade aircraft aluminum, CNC machined- +/- removed by CNC machine Compatible vehicles:BMW 1 Series F20/F21BMW 2 Series F22/F23BMW 2 Series F45BMW 2 Series F87BMW 3 Series F30/F31BMW 3 Series F34BMW 3 Series F80BMW 4 Series F32/F33BMW 4 Series F82/83BMW 5 Series F07/F10/F11BMW 6 Series F06/F12/F13BMW i8BMW X1 F48 (from 2015)BMW X3 F25BMW X4 F26BMW X5 F15BMW X5 F85BMW X6 F16BMW X6 F86

Transform your vehicle's engine compartment with the pre-impregnated carbon replacement radiator cooling cover. Made from lightweight prepreg carbon fiber. When you buy pre-preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run. Assembly: Plug&Play Details:- 100% carbon fibre construction- High gloss finish- Performance style design- Supplied with 3M double-sided adhesive tape already attached- Use rubber adapter from the original engine cover + emblem- registration free Compatible vehicles:- BMW G90 M5 - BMW G99 M5 Touring Note: This is NOT an original BMW product!

The high-end kit for your high-end vehicle!The iconic design is complemented by a perfect fit. ATTENTION:These are only the fins to match the diffuser from 3D-Design!You will of course receive the fins for both sides. SPECIAL PRICE - SMALL DEFECTS (see pictures) Compatible vehicles:BMW 5 (G30, F90) M5 2017-2023

A high-end kit for a high-end car. The new F90 gets a new, innovative look. The new AERO body kit from 3DDesign for the F90 fits seamlessly into the familiar, discreetly aggressive racing style of the 3DDesign lines. The iconic design is complemented by a perfect fit and the usual uncompromising quality. The side skirts round off the look of the wide diffuser and the aggressive front lip and widen the car for more downforce. Performance side skirts for the F90, which are also a real visual upgrade! Pure luxury! Compatible vehicles:BMW 5 (G30, F90) M5 2017-2023

The G90 carbon fibre side skirts lend your vehicle a distinctly sporty aggressiveness and give it just as much presence on the road. Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style fabric- High-gloss finish- Perfect fit- with certificate Compatible vehicles:- BMW G90 5 Series M5 535kW / 727hp (2024+)Note: This is NOT an original BMW product!

The G90 Performance side skirts made of Pre-Preg carbon fibre give your vehicle a distinctly sporty aggressiveness and give it a lot of presence on the road. Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x pair of side skirts in prepreg carbon fibre Compatible vehicles:BMW M5 G90BMW M5 G99Note: This is NOT an original BMW product!

The G90 SOOQOO side skirts made of pre-preg carbon fibre give your vehicle a distinctly sporty aggressiveness and give it a lot of presence on the road. Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x pair of SOOQOO side skirts in prepreg carbon fibre Compatible vehicles:BMW M5 G90BMW M5 G99Note: This is NOT an original BMW product!

The SOOQOO side skirts with flaps made of pre-preg carbon fiber give your vehicle a distinctly sporty aggressiveness and give it a lot of presence on the road.Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x pair of SOOQOO side skirts in prepreg carbon fibre Compatible vehicles:BMW M5 G90BMW M5 G99Note: This is NOT an original BMW product!

AutoTecknic carbon steering wheel trim suitable for F80 / F82 / F10 LCI / F06 / F12 / F13 Compatible vehicles:BMW 2 Coupe (F22, F87) M2 2015-2018BMW 2 Coupe (F22, F87) M2 CS 2019-2021BMW 2 Coupe (F22, F87) M2 Competition 2018-2021BMW 3 (F30, F80) M3 2014-2018BMW 3 (F30, F80) M3 CS 2018-2018BMW 3 (F30, F80) M3 Competition 2016-2018BMW 4 Convertible (F33, F83) M4 2014-2020BMW 4 Convertible (F33, F83) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 2014-2020BMW 4 Coupe (F32, F82) M4 CS 2017-2019BMW 4 Coupe (F32, F82) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 GTS 2016-2019BMW 5 (F10) M5 2011-2016BMW 5 (F10) M5 30th Anniversary 2014-2016BMW 5 (F10) M5 Competition 2013-2016BMW 6 Convertible (F12) M6 2012-2018BMW 6 Convertible (F12) M6 Competition 2013-2015BMW 6 Convertible (F12) M6 Competition 2015-2018BMW 6 Coupe (F13) M6 2012-2017BMW 6 Coupe (F13) M6 Competition 2013-2015BMW 6 Coupe (F13) M6 Competition 2015-2017BMW 6 Gran Coupe (F06) M6 2013-2018BMW 6 Gran Coupe (F06) M6 Competition 2013-2015BMW 6 Gran Coupe (F06) M6 Competition 2015-2018BMW X5 (F15, F85) M 2014-2018BMW X6 (F16, F86) M 2014-2019

The AULITZKY app "do it yourself" Get your app now to tune your car yourself or to manage a selection of your finished maps, which have been individually tuned on our test bench, and flash them to your vehicle in no time at all. In addition to flashing your engine control unit, we also offer transmission programming. It is also possible to fully read and delete the fault memory. Your benefits at a glance: -software for ECU (engine control unit) -Software for TCU (transmission control unit) -Read fault memory -Delete fault memory -Datalogging -Tuning for Stage 1 & Stage 2 included -Custom maps possible -Stage 3 available on site for an additional charge Please note: From certain model years and variants, an OBD unlock or ECU unlock is required to ensure that your vehicle can be flashed via OBD. The OBD unlock can be carried out by sending the ECU to us or by our service centre partners at various locations in Germany. For the ECU unlock we need the vehicle in our workshop for approx. 1.5 - 2 weeks. For this model, we recommend converting our divert-air valve kit to allow the excess pressure in the turbocharger system to escape, as it can cause damage to the turbocharger without it. -Stage 1: SUV kit, Pipercross air filter -Stage 2: additional downpipes -Stage 3: additional upgrade turbocharger, reinforced pistons and connecting rods with bearings Note: Registration of the performance upgrade is not part of this order and must be requested separately by e-mail.Compatible vehicles:VehicleTypePower outputEngine capacityEngine typeYear of construction BMW 5 Series (G30)M550i xDrive340kW / 462hp4395cm³N63 B44 C03.17 - 06.19 BMW 5 Series (G30)M550i xDrive390kW / 530hp4395cm³N63 B44 D07.19 - BMW 5 Series (F90/G30)M5 441kW / 600hp4395cm³S63 B44 B09.17 - BMW 5 Series (F90/G30)M5 Competition460kW / 625hp4395cm³S63 B44 B07.18 - BMW 5 Series (F90/G30)M5 CS467kW / 635hp4395cm³S63 B44 B03.21 - BMW 7 Series (G11/G12)750i / xDrive330kW / 449hp4395cm³N63 B44 C09.15 - 02.19 BMW 7 Series (G11/G12)750i xDrive390kW / 530hp4395cm³N63 B44 D03.19 - BMW 8 Series (G14/G15/G16)M850i xDrive390kW / 530hp4395cm³N63 B44 D11.18 - BMW 8 Series (F92/G14/G15/G16)M8 441kW / 600hp4395cm³S63 B44 B07.19 - BMW 8 Series (F92/G14/G15/G16)M8 Competition460kW / 625hp4395cm³S63 B44 B07.19 - BMW X5 (G05)M50i xDrive390kW / 530hp4395cm³N63 B44 D08.19 - BMW X5 (F95/G05)M441kW / 600hp4395cm³S63 B44 B12.19 - BMW X5 (F95/G05)M Competition460kW / 625hp4395cm³S63 B44 B12.19 - BMW X6 (G06)M50i xDrive390kW / 530hp4395cm³N63 B44 D08.19 - 03.23 BMW X6 (F96/G06)M441kW / 600hp4395cm³S63 B44 B12.19 - 03.23 BMW X6 (F96/G06)M Competition460kW / 625hp4395cm³S63 B44 B12.19 - 03.23 BMW X7 (G07)M50i xDrive390kW / 530hp4395cm³N63 B44 D07.19

The AULITZKY app “do it yourself” Get your app now to tune your car yourself or manage a selection of your finished maps, which have been individually tuned by us on the test bench, and flash them to your vehicle in no time at all. In addition to flashing your engine control unit, we also offer transmission programming. It is also possible to fully read and delete the fault memory. Your benefits at a glance:-software for ECU (engine control unit)-Software for TCU (transmission control unit)-Read fault memory-Delete fault memory-Datalogging-Tuning for Stage 1 & Stage 2 included-Custom maps possible-Stage 3 available on site for an additional charge Attention: From certain model years and variants, an OBD unlock or ECU unlock is required to ensure that your vehicle can be flashed via OBD.The OBD unlock can be carried out by sending the ECU to us or by our support partners at various locations in Germany. For the ECU unlock we need the vehicle in our workshop for approx. 1.5 - 2 weeks. -Stage 1: Pipercross air filter-Stage 2: additional downpipe, charge pipe-Stage 3: additional upgrade turbocharger, Dorch high-pressure pump, turbocharger inlet, exhaust system Note: Registration of the performance upgrade is not part of this order and must be requested separately by e-mail.Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction BMW 5er (F07)550i / xDrive 330kW / 449hp4395cm³N63 B44 A, N63 B44 B07.12 - 02.17 BMW 5er (F10)M5 412kW / 560hp4395cm³S63 B44 B09.11 - 10.16 BMW 5er (F10)M5 Competition423kW / 575hp4395cm³S63 B44 B02.13 - 10.16 BMW 5er (F10)M5 30th Anniversary441kW / 600hp4395cm³S63 B44 B07.14 - 10.16 BMW 6er (F13)650i / xDrive 330kW / 449hp4395cm³N63 B44 B07.12 - 10.17 BMW 6er (F13)M6412kW / 560hp4395cm³S63 B44 B07.12 - 10.17 BMW 6er (F13)M6 Competition423kW / 575hp441kW / 600hp4395cm³S63 B44 B07.13 - 02.1503.15 - 10.17 BMW X5 (F15/F85)50i xDrive330kW / 449hp4395cm³N63 B44 B08.13 - 07.18 BMW X5 (F85)M423kW / 575hp4395cm³S63 B44 B12.14 - 07.18 BMW X6 (F16/F86)50i xDrive330kW / 449hp4395cm³N63 B44 B08.14 - 07.19 BMW X6 (F86)M423kW / 575hp4395cm³S63 B44 B12.14 - 07.19

The AULITZKY app “do it yourself” Get your app now to tune your car yourself or manage a selection of your finished maps, which have been individually tuned by us on the test bench, and flash them to your vehicle in no time at all. In addition to flashing your engine control unit, we also offer transmission programming. It is also possible to fully read and delete the fault memory. Your benefits at a glance:-software for ECU (engine control unit)-Software for TCU (transmission control unit)-Read fault memory-Delete fault memory-Datalogging-Tuning for Stage 1 & Stage 2 included-Custom maps possible-Stage 3 available on site for an additional charge Attention: From certain model years and variants, an OBD unlock or ECU unlock is required to ensure that your vehicle can be flashed via OBD.The OBD unlock can be carried out by sending the ECU to us or by our support partners at various locations in Germany. For the ECU unlock we need the vehicle in our workshop for approx. 1.5 - 2 weeks. -Stage 1: Pipercross air filter-Stage 2: additional downpipe, charge pipe-Stage 3: additional upgrade turbocharger, Dorch high-pressure pump, turbocharger inlet, exhaust system Note: Registration of the performance upgrade is not part of this order and must be requested separately by e-mail.Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction BMW 1er (F20/F21)M140i / xDrive250kW / 340hp2998cm³B58 B30 A09.15- 05.18 BMW 2er Coupe (F22)M240i / xDrive250kW / 340hp2998cm³B58 B30 A09.15 - 05.18 BMW 2er Coupe (G42)M240i / xDrive275kW / 374hp2998cm³B58 B30 B07.21 - BMW 3er (F30/F31/F34)340i / xDrive240kW / 326hp265kW / 360hp2979cm³B58 B30 A07.15 - BMW 3er (G20)M340i xDrive275kW / 374hp285kW / 387hp2998cm³B58B30B07.20 - BMW 4er (F32/F33/F36)440i / xDrive240kW / 326hp265kW / 360hp2979cm³B58 B30 A03.16 - 05.21 BMW 4er (G22)M440i xDrive275kW / 374hp285kW / 387hp2998cm³B58B30B07.20 - BMW 5er (G30/G31)540i / xDrive250kW / 340hp265kW / 360hp2998cm³B58 B30 A, B58 B30 C09.16 - 07.19 BMW 5er (G30/G31)545e xDrive290kW / 394hp2998cm³B58 B30 C11.20 - BMW 6er (G32)640i / xDrive250kW / 340hp265kW / 360hp2998cm³B58 B30 A, B58 B30 C06.17 - 07.19 BMW 7er (G11/G12)740i / xDrive245kW / 333hp250kW / 340hp2998cm³B58 B30 C03.19 - BMW 8er (G14/G15/G16)840i / xDrive245kW / 333hp250kW / 340hp2998cm³B58 B30 C07.19 - BMW X3 (G01)xDrive M40i260kW / 354hp265kW / 360hp285kW / 387hp2998cm³B58 B30 A, B58 B30 B08.17 - 10.19 BMW X4 (G02)xDrive M40i260kW / 354hp265kW / 360hp285kW / 387hp2998cm³B58 B30 A04.18 - BMW X5 (G05)xDrive 40i250kW / 340hp280kW / 381hp2998cm³B58 B30 C08.18 -04.23 - BMW X5 (G05)xDrive 45e235kW / 320hp290kW / 394hp2998cm³B58 B30 C06.19 - BMW X6 (G06)xDrive 40i250kW / 340hp2998cm³B58 B30 C08.19 - 03.23 BMW X7 (G07)xDrive 40i250kW / 340hp2998cm³B58 B30 C03.19 - BMW Z4 (G29)M40i250kW / 340hp2998cm³B58 B30 C11.18 - ToyotaSupra GR (A90/DB)250kW / 340hp2998cm³B5803.19 -