The air guide grille set is suitable for:Audi RS4 B5 2,7 BiTurbo 280KW/380hp The Wagner Tuning air guide grille set is the ideal solution to optimize the air flow to the intercoolers of your Audi RS4 B5. These high-quality air guide grilles have been specially developed for the RS4 B5 and offer a plug-and-play installation that makes replacing the original grilles child's play. The improved airflow optimizes the cooling performance of the intercoolers, resulting in more efficient engine performance. Optimized airflow: The airflow grilles allow increased airflow to the intercoolers, resulting in improved cooling performance and increased engine efficiency.Plug-and-play installation: The set is easy to install and requires no complex modifications. It can easily be replaced with the original grilles.Tailor-made for the RS4 B5: The air guide grilles are tailor-made for the Audi RS4 B5 and fit perfectly in the vehicle, provided they are models without fog lights. Scope of delivery:1 pair of air guide grilles (right/left)

MOVIT DDE steel brake system 342x34mm (6 piston calliper) for the front axle, from 18 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined. The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications. The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple layer of paint.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts Attention: The conversion means that only rims with at least 18 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. MOVIT sports brake callipers, 6-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force MOVIT sports brake discs, 342x34mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Maximum fading resistance- Special alloy for high thermal conductivity MOVIT comfort brake pads- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x assembly material1x installation instructions and running-in instructions1x parts certificate Compatible vehicles:Audi A4 / S4 8K / B8Audi A5 / S5 8TVW Beetle 5CVW Golf IV 4motionVW Golf VII GTI / GTD 57 series pistonsVW Golf VII GTI / GTD 57 series pistonsVW GOLF VII GTI Clubsport / Performance 60 series pistonsVW T5 / T6 Multivan

MOVIT DDE steel brake system 370x35mm (6 piston calliper) for the front axle, from 18 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined. The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications. The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple paint finish.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts Attention: The conversion means that only rims with at least 18 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. MOVIT sports brake callipers, 6s5, 6-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force MOVIT sports brake discs, 370x35mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Maximum fading resistance- Special alloy for high thermal conductivity MOVIT comfort brake pads, BE-6s1- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x assembly material1x installation instructions and running-in instructions1x parts certificate Compatible vehicles:BMW 1 Series F20 / F21 (also M)Ford Focus RS CB4 / MKIIAudi RS3 8PAudi RS4 B5Audi S4 Type 8D / B5BMW M3 E46BMW M3 E46 CSLBMW M3 E92Ford Mustang V Shelby GT 500Mercedes Benz W639 Vito / VianoVolvo XC90 1st gen. from 2011 onwardsVW Golf VII GTI / GTD 57 series pistonsVW Golf VII GTI / GTD 57 series pistonsVW GOLF VII GTI Clubsport / Performance 60 series pistonsVW Golf VII RVW Golf VII RVW T5 / T6 Multivan

A powerful brake is one of the most important components in motorsport. With these upgrade kits, the necessary balance of performance, weight and durability has been perfectly combined through the uncompromising selection of materials, so that this product can meet the high demands of extreme automotive applications. To achieve this, MOV'IT has increased the diameter and thickness of the brake discs and used more cross holes. Each pre-cast hole is re-drilled and countersunk to achieve a more favourable flow. The brake disc's optimised DDE ventilation system has an 80% larger surface area compared to other brake discs, resulting in a significant reduction in temperature and wear.Without parts certificate Attention: The conversion means that only rims with at least 19 inches can be fitted! Features: - Upgrade kit front axle, 370mm, 2-piece disc, perforated - Without parts certificate Scope of delivery: - 2x brake disc perforated left/right incl. brake pot - 1x mounting material - 1x installation instructions and running-in instructions Compatible vehicles:Audi R8 (422, 423) 4.2 FSI quattro 309kW / 420PS / 4163cm³ (until 31/08/2009)Audi A4 B7 (8E) RS4 quattro 309kW / 420PS / 4163cm³Audi A6 C5 (4B) RS6 quattro 331kW / 450PS / 4172cm³Audi A6 C5 (4B) RS6 quattro plus 353kW / 480PS / 4172cm³ Notes:When installing the upgrade kit, we always recommend replacing the brake pads, as the use of used pads on new brake discs is not recommended.When installed in our factory, the conversion is carried out exclusively with new brake pads!

A powerful brake is one of the most important components in motorsport. With these upgrade kits, the necessary balance of performance, weight and durability has been perfectly combined through the uncompromising selection of materials, so that this product can meet the high demands of extreme automotive applications. To achieve this, MOV'IT has increased the diameter and thickness of the brake discs and used more cross holes. Each pre-cast hole is re-drilled and countersunk to achieve a more favourable flow. The brake disc's optimised DDE ventilation system has an 80% larger surface area compared to other brake discs, resulting in a significant reduction in temperature and wear. Attention: The conversion means that only rims with at least 19 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. Features: - Upgrade kit front axle, 380mm, 2-piece disc, perforated - incl. parts certificateDetails:MOVIT steel brake discs, 2-piece- Highly efficient cooling system- Double, directional ventilation- Special alloy- High thermal conductivity- Highest fading resistanceMOVIT sports brake pads, front axle- Optimally compatible with MOVIT brake discs- Maximum durability with low wear- With road approval- Low noise development- Low base temperature for the perfect coefficient of frictionMOVIT steel flex lines, front and rear axle- Better response behaviour of the brake system- Durable quality (does not become porous and therefore does not leak)- Brake line does not expand under pressure- Harder and more constant pressure point- Improved modulation Scope of delivery: - 2x brake disc left/right incl. brake pot - 1x mounting material - 1x installation instructions and running-in instructions - 1x parts certificate Compatible vehicles:Audi A4 B8 (8K5) Avant RS4 quattro 331kW / 450PS / 4163cm³Audi A5 (8T3) RS5 quattro 331kW / 450PS / 4163cm³ Notes:When installing the upgrade kit, we always recommend replacing the brake pads, as the use of used pads on new brake discs is not recommended.When installed in our factory, the conversion is carried out exclusively with new brake pads!

Facts: Power increase: 13-17PS, 15-20ft-lbV box Acceleration: 60-130mph reduced by 0.5 seconds Material: Carbon fibre Manufacturer: Eventuri Expertise: without The Audi B9 RS4/RS5 Eventuri intake system is designed to give the turbo a less restrictive airflow while maintaining low inlet temperatures. The RS5/RS4 engine bay is very prone to heat build-up, so simply using an open filter system would result in better airflow at higher inlet temperatures. That's why we've completely redesigned the airflow from the turbo inlet to the front grille with a highly efficient sealed system. The standard restrictive airbox and flexible plastic inlet pipe have been replaced by our patented Venturi filter housing and a duct system with smooth transitions. The convoluted fabric inlet pipe is replaced by our Venturi housing and integrated full carbon pipe, resulting in a smoother airflow as it enters the turbo inlet pipe. The resulting performance gains and aesthetics are industry leading for this platform. Available with or without optional real carbon fibre air intake. The improvements result from a combination of reasons: 1) The closed system keeps IATs low - especially with the front air scoop forcing air into the system. 2) The venturi housing provides a smooth transition from the filter to the intake manifold without friction. This helps the turbo to run more efficiently by maintaining laminar flow in the inlet section. 3) The entire system is made of pure pre-preg carbon fibre, which is excellent for thermal insulation. Included components: Patented carbon fibre venturi housing with integrated pipe High flow filter Generation 2 carbon fibre main air duct with expanding seal Carbon secondary air inlet Carbon front air baffle Laser-cut stainless steel mounting brackets CNC machined mounting studs Carbon intake housing construction The filter housing consists of our customised Generation 2 filter, the carbon housing and the integrated pipe. The carbon housing encloses the rear-mounted filter and gently moulds the airflow downwards to the turbo tube, which corresponds in diameter to the turbo inlet. This is a key feature of the intake concept, where we have eliminated the requirement for a smooth transition to a coiled rubber hose between the intake and the engine. The filter housing and integrated pipe extend to the standard turbo pipe and by mounting to the engine, the entire filter housing moves with the engine. As the engine and filter housing moves under acceleration, it is able to maintain a seal to the duct through an expanding rubber profile fitted to the face of the duct. This gentle reduction of the cross-sectional area creates the Venturi effect, in which the airflow is accelerated while maintaining laminar conditions. It can be considered as a large funnel. Nice to see in the diagram showing the comparison between our patent pending design and an OEM intake system. Our custom filters assist the airflow through the housings and allow for a smooth velocity profile as the airflow exits the housings. Carbon main air duct with expanding sealThe duct directs ambient air from the scoop to the filter housing. It also creates a sealed volume of ambient air in front of the filter from which the system can draw air at any time. The duct has been designed to make optimum use of the volume available in the engine compartment. To ensure a good seal against engine compartment heat, the duct is also fitted with a flexible rubber rim around the openings, which presses against the filter housing and the OEM front duct, creating the desired seal while allowing the housing to move with the engine. To further improve airflow, we have an additional opening at the rear of the duct in the cold area of the engine bay. Compatible vehicles:VehicleTypePower outputEngine capacityEngine size Audi A4 (B9/8W)RS4 quattro331kW / 450PS2894ccDECA Audi A5 (B9/F5)RS5 quattro331kW / 450PS2894ccDECA

The Competition intercooler kit is suitable for:Audi S4 B9 8W 3,0TFSI 260KW/354hp (2016+)Audi S5 B9 F5 3,0TFSI 260KW/354hp (2016+) Maximize the performance and efficiency of your Audi S4 B9 or A5 F5 with our state of the art Charge Pipe Kit Ø66mm. Designed to optimize airflow and minimize pressure loss, this kit offers a premium solution for enthusiasts looking to unlock the full potential of their vehicle. Optimized airflow: The Ø66mm diameter aluminium intercooler allows for improved airflow and reduces pressure loss compared to the stock system. This contributes to increased performance and improved engine response. High quality materials: Made from high quality aluminum and silicone, the components of this kit offer excellent heat resistance and durability, even under extreme conditions. Easy installation: The kit is supplied with all necessary hose clamps and fitting materials and is easy to install using standard hand tools. The precisely manufactured silicone hoses ensure a perfect fit and a reliable seal. Compatibility: This Charge Pipe Kit Ø66mm is specially designed for the Audi S4 B9 and A5 F5 and is only compatible with our original Wagner Tuning intercooler to ensure seamless integration. Note: Please note that the item image is for illustrative purposes only and the actual shape of the kit may differ slightly. Scope of delivery:3 silicone hoses1 aluminum charge air tube6 hose clamps1 M6x10 screwAttention: Not approved in the area of the StVZO.

The intercooler kit is suitable for:Audi RS4 B5 2,7 BiTurbo 280KW/380hp Prepare to exceed the limits. The Wagner Tuning Gen.2 Competition Intercooler Kit takes your Audi RS4 B5 to the next level of performance and provides an unparalleled driving experience. The brand new high performance intercoolers impress with their net dimensions of 255 mm x 265 mm x 90 mm. This means an impressive 46% larger frontal area and a massive 89% increase in charge air volume, setting your RS4 B5 apart from the standard intercoolers. Experience revolutionary cooling performance with the newly developed Competition High-Performance Network, which is at the cutting edge of tube-fin technology. The cast aluminium end boxes of the intercooler have been optimized with advanced flow analysis in the CAD system to ensure optimal internal airflow and reduce back pressure to a minimum. This intercooler kit has been specially developed for the high demands of the Audi RS4 to deliver top performance that meets the requirements of the racetrack. Experience optimal cooling of the supercharged air and feel the significant increase in power. Compared to the Performance Gen.1 intercooler, there are further significant improvements. This kit includes carbon air ducts, which not only ensure improved performance, but also create a visually appealing accent in your engine compartment. Installation is effortless on the original mounting points, meaning you can reap the benefits without much effort. A kit that combines performance and convenience. At Wagner Tuning, quality comes first. Each of our products, including the Gen.2 Competition Intercooler Kit, undergoes rigorous quality control to ensure top excellence. Are you ready to unleash the full potential of your Audi RS4 B5? Choose the Wagner Tuning Gen.2 Competition Intercooler Kit and experience the performance you deserve. Advantages of the Wagner Tuning intercooler:- improved cooling capacity- 46% larger front surface- 89% increased charge air volume- flow-optimized- original mounting points Scope of delivery for individual intercoolers:2 intercoolers (right, left)4 silicone hoses8 hose clamps1 fixing material1 installation instruction Scope of delivery complete intercooler kit:2 intercoolers (right, left)2 carbon air ducts (right, left)2 air grilles without fog light mounts (right, left)4 silicone hoses8 hose clamps1 fixing material1 installation instructionAttention: Not approved in the area of the StVZO.

The intercooler kit is suitable for:Audi RS4 B5 2.7 BiTurbo 280KW/380PS This upgrade goes beyond just increasing performance - it's about reshaping your driving experience and pushing the limits. The brand new high performance intercoolers have mesh dimensions of 255mm x 260mm x 120mm. This equates to an impressive 43% larger frontal area and an exceptional 147% increase in core volume, setting you apart from the standard intercooler. Experience groundbreaking cooling performance with the newly developed Competition High-Performance Network, which proudly showcases the latest advances in tube-fin technology. The intercooler's cast aluminium end boxes have been carefully optimised through CAD-based flow analysis to ensure optimal internal airflow and minimal backpressure. This intercooler kit has been meticulously developed to meet the requirements of highly tuned Audi RS4s. Both inlet and outlet diameters have been increased to Ø65mm to meet extreme performance requirements. Maximise the cooling effect of your supercharged air with a remarkable performance boost that puts your Audi RS4 B5 in a league of its own. With this kit, you also get carbon fibre air ducts that not only boost performance but also add a stylish touch to your engine bay.At Wagner Tuning, we are committed to quality. Our products, including this EVO 2 Competition Intercooler Kit, are subject to strict quality controls to ensure excellence. Whilst installation is facilitated by using the original mounting points, significant vehicle modifications are required to accommodate these high performance intercoolers. Please refer to the enclosed installation instructions. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 43% larger front surface area- 147% more core volume- Inlet and outlet diameter increased to Ø65mm- original mounting points Are you ready to experience the power and excitement you've been looking for? Opt for the Wagner Tuning EVO 2 Competition Intercooler Kit and embark on an unforgettable journey of power and precision. Scope of delivery complete intercooler kit:2 intercoolers (right, left)2 carbon fibre air ducts (right, left)2 air grilles without fog light mounts (right, left)4 silicone hoses8 hose clamps1 fixing material1 installation instruction Scope of delivery charge air cooler individually:2 intercoolers (right, left)4 silicone hoses8 hose clamps1 fixing material1 installation instruction Attention: Not authorised in the area of the StVZO.

The Wagner Tuning Competition intercooler kit is suitable for the following vehicles:Audi A4 B8.5 1,8 TFSI 2013-2015 (MKB:CJEB/CJED/CJEE)*Audi A4 B8.5 2.0 TFSI 2013-2015 (MKB: CNCD/CNCE)*Audi A4 B8.5 Allroad 2.0 TFSI 2013-2015 (MKB: CNCD/CNCE)*Audi A5 B8.5 1.8 TFSI 2015- (MKB: CJEB/CJED/CJEE)*Audi A5 B8.5 2.0 TFSI 2013 (MKB: CNCD/CNCE)*Audi A5 B8.5 Sportback 1.8 TFSI 2015- (MKB: CJEB/CJED/CJEE)*Audi A5 B8.5 Sportback 2.0 TFSI 2013- (MKB: CNCD/CNCE)** For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. You can find information on this in our installation instructions. Immerse yourself in a world of improved performance with our high-performance intercooler. With impressive mesh dimensions of 610 mm x 440 mm x 65 mm and a substantial volume of 17,446 liters, this intercooler offers a 178% larger flow area and 158% more charge air volume compared to the factory intercooler. Our competition high-performance network, equipped with internal turbulators, sets new standards for efficiency and quality. Despite its size, this high-performance cooler weighs only 9.1 kg, which makes its performance even more impressive. The cast aluminium end boxes were developed using CAD design and optimized for optimum internal airflow using CFD simulations. An integrated air guide in the end box ensures even filling of the Competition high-performance mesh. With a connection diameter of Ø67mm, reinforced silicone hoses are supplied to further optimize the airflow. Our intercoolers are equipped with a high-quality anti-corrosion coating that not only protects against environmental influences, but also offers excellent heat conduction properties. This guarantees permanent and optimum cooling and leads to a noticeable increase in performance. Our intercooler kit is completely ready to install and only requires replacement with the factory intercooler. A simple step for a significant increase in performance. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 178% larger inflow area- 158% more charge air volume- Connection diameter of Ø67mm- Completely ready to install With pressure tests up to 6 bar, this intercooler is able to meet the requirements of racing and demanding drivers. We attach great importance to quality. Our intercooler kit is subject to constant quality monitoring to ensure that you receive only the best. Scope of delivery:1 intercooler2 charge air hoses1 aluminum pipe5 hose clamps1 mounting material1 assembly instructionAttention: Not approved in the area of the StVZO.

The Competition intercooler kit is suitable for:Audi A4 B8 2,7 TDI (140KW/190hp MKB:CAMA, CGKA)*Audi A4 B8 3,0 TDI (176KW/240hp MKB:CAPA, CCWA, CCLA)*Audi A4 B8 Allroad 3.0 TDI (176KW/240hp MKB:CAPA, CCWA, CCLA)*Audi A5 B8 2.7 TDI (140KW/190hp MKB:CAMA, CGKA)*Audi A5 B8 3.0 TDI (176KW/240hp MKB:CAPA, CCWA, CCLA)*Audi A5 Sportback 2.7 TDI (140KW/190hp MKB:CAMA, CGKA)*Audi A5 Sportback 3.0 TDI (176KW/240hp MKB:CAPA, CCWA, CCLA)** For B8.5 facelift models Part number: WT200001123* For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. You will find information on this in our installation instructions. Exceed all expectations with our Competition intercooler kit for the Audi A4 B8 Allroad 2.7 TDI! Our high-performance intercooler is the key to dramatically increasing the performance of your Audi A4 B8 Allroad 2.7 TDI. With impressive mesh dimensions of 610mm x 440mm x 65mm and a charge air volume of 17,446 liters, this intercooler offers a massive 178% larger flow area and 158% more charge air volume compared to the factory intercooler. Our Competition high-performance net is a quality tube fin net with internal turbulators. Despite its impressive size, the intercooler weighs only 9.1 kg. The cast aluminium end boxes were developed in the CAD system and optimized for optimal internal airflow using CFD simulations. An integrated air duct in the end box ensures uniform filling of the competition high-performance network. The connection diameters have been increased to Ø67 mm, which is why our kit is supplied with reinforced silicone hoses. All our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This ensures long-lasting and optimum cooling and provides a noticeable increase in performance. Our kit is completely ready to install and enables easy replacement with the factory intercooler. Our intercooler has been tested up to 6 bar and is pressure-stable, making it perfect for racing. All our products are subject to strict quality control procedures to ensure the highest standards. Your Audi A4 B8 Allroad 2.7 TDI deserves the best! Our Competition intercooler kit will take your Audi to a new level of performance and make your driving experience more exciting. Get ready to dominate the road with your Audi A4 B8 Allroad 2.7 TDI! Advantages of the Wagner Tuning intercooler:- improved cooling performance- 178% larger inflow area- 158% more charge air volume- Connection diameter increased to Ø67 mm- uncomplicated replacement Scope of delivery:1 intercooler2 charge air hoses4 hose clamps1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.

The Competition intercooler kit is suitable for:- Audi A4 B8.5 3.0 TDI (150KW/204hp MKB: CLAB)*- Audi A4 B8.5 3,0 TDI (180KW/245hp MKB: CDUC, CKVC)*- Audi A4 B8.5 Allroad 3.0 TDI (150KW/204hp MKB: CLAB)*- Audi A4 B8.5 Allroad 3.0 TDI (180KW/245hp MKB: CDUC, CKVC)*- Audi A5 B8.5 3.0 TDI (150KW/204hp MKB: CLAB)*- Audi A5 B8.5 3.0 TDI (180KW/245hp MKB: CDUC, CKVC)*- Audi A5 Sportback 3.0 TDI (150KW/204hp MKB: CLAB)*- Audi A5 Sportback 3.0 TDI (180KW/245hp MKB: CDUC, CKVC)** For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. You can find information on this in our installation instructions. Your Audi 3.0TDI deserves the best, and the best is our Wagner Tuning Competition intercooler. Experience the future of performance optimization! Our Competition mesh sets new standards in terms of cooling performance and weight. At just 9.1 kg, this intercooler is a lightweight that also offers impressive cooling performance. The freeform cast aluminum end boxes have been CAD designed to ensure optimal internal airflow. This intelligent design results in efficient cooling of your charge air. Our intercooler offers an impressive 178% more cooling surface and 158% more volume compared to the standard intercooler. This enables maximum heat transfer and increased performance. Compared to the standard intercooler, our Competition intercooler generates significantly less back pressure. This means that your engine works more efficiently and you experience a noticeable increase in performance. Our intercooler is equipped with an anti-corrosion coating that not only protects against environmental influences, but also enables optimum heat dissipation. The result: a long-lasting and optimum cooling effect. Our kit is completely ready to fit and 100% accurate. Replacing it with the standard intercooler is child's play. With a connection diameter of 67 mm on both sides, this intercooler is perfectly matched to your Audi 3.0TDI. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 178% more cooling surface- 158% more volume- less back pressure- Connection diameter 67 mm on both sides- Plug & Play Experience the future of performance enhancement with the Wagner Tuning Competition intercooler. Scope of delivery:1 intercooler2 charge air hoses4 hose clamps1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.

The Competition intercooler kit is suitable for the following vehicles:- Audi A4 B9 3,0,0TDI 160-200KW/218-272hp (2015-2018)- Audi A4 B9 45TDI 170KW/231hp (2019+)- Audi A4 B9 50TDI 210KW/286hp (2019-2020) *only suitable for VW EA897evo2 engine- Audi A5 F5 3.0TDI 160-210KW/218-286hp (2017-2018)- Audi A5 F5 45TDI 170KW/231hp (2019+)- Audi A5 F5 50TDI 210KW/286hp (2019-2020) *only suitable for VW EA897evo2 engine Your Audi A4 B9/A5 F5 deserves only the best, and that's exactly what the Wagner Tuning Competition high-performance intercooler offers. This masterpiece of German engineering is the key to an impressive performance boost for your vehicle. With impressive net dimensions of 550 mm x 445 mm x 70 mm (equivalent to 17,130 cc), this intercooler offers a 134% larger flow area and an astonishing 105% more charge air volume compared to the standard intercooler. The competition high-performance network, equipped with internal turbulators, guarantees the highest quality and efficiency. Although this intercooler is large, it only weighs a light 9.5 kg. The end boxes are made of high-quality cast aluminium and have been optimized using CFD flow analysis to ensure optimum performance. The connection diameters of Ø62 mm at the intercooler inlet and Ø67 mm at the intercooler outlet ensure a smooth airflow. The result is excellent cooling properties with minimal back pressure. All our intercoolers are equipped with an anti-corrosion coating that not only protects against environmental influences, but also offers excellent heat conduction properties. This guarantees long-lasting and optimum cooling, resulting in an impressive increase in performance. Our intercooler kit is completely ready to install and can be easily replaced with the standard intercooler - plug-and-play. This makes upgrading child's play. With a test up to 6 bar and proven pressure stability, this intercooler is perfect for racing. Welcome to the future of performance upgrades for your Audi A4 B9/A5 F5. Treat yourself to the Competition high-performance intercooler and feel the difference!Advantages of the Wagner tuning intercooler:- improved cooling performance- 134% larger inflow area- 105% more charge air volume- Connection diameter Ø62 mm at the charge air cooler inlet; Ø67 mm at the charge air cooler outlet- Minimal back pressure- Plug and Play Mesh original intercooler:720mm x 145mm x 80mmV=8.35 litersA=1044 cm² Mesh Wagner Tuning intercooler:550mm x 445mm x 70mmV=17.13 litersA=2447 cm² Scope of delivery:1 intercooler (black coated)1 silicone hose (black)1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.

The Competition intercooler kit is suitable for the following vehicles:Audi A4 B9 2,0TFSI ultra 140KW/190hp (2015-2018)Audi A4 B9 2.0TFSI 185KW/252hp (2015-2018)Audi A4 B9 35TFSI 110KW/150hp (2018+)Audi A4 B9 40TFSI 140KW/190hp (2018+)Audi A4 B9 45TFSI 180KW/245hp (2019+)Audi A5 F5 2.0TFSI g-tron 125KW/170hp (2017-2018)Audi A5 F5 2.0TFSI ultra 140KW/190hp (2016-2018)Audi A5 F5 2.0TFSI 185KW/252hp (2016-2018)Audi A5 F5 35TFSI 110KW/150hp (2018+)Audi A5 F5 40TFSI 140KW/190hp (2018+)Audi A5 F5 45TFSI 180KW/245hp (2019+) Boost the performance of your Audi A4 B9/A5 F5 to a new level with our Competition high-performance intercooler. This technical masterpiece is the key to a drastic increase in performance. With impressive net dimensions of 550 mm x 445 mm x 70 mm (equivalent to 17,130 cm³), this intercooler offers an astonishing 105% more charge air volume compared to the standard intercooler. The competition high-performance network, equipped with internal turbulators, guarantees the highest quality and efficiency. Although this intercooler is impressively large, it weighs just 9.5 kg. The end boxes are made of high-quality cast aluminium and have been optimized using CFD flow analysis to ensure optimum performance. With connection diameters of Ø62 mm at the intercooler inlet and Ø67 mm at the intercooler outlet, this intercooler ensures smooth airflow. The result? Outstanding cooling performance with minimal back pressure. All our intercoolers are equipped with an anti-corrosion coating that not only protects against environmental influences, but also offers excellent heat conduction properties. This guarantees long-lasting and optimum cooling, resulting in an impressive increase in performance. This intercooler kit is completely ready to install and can be easily replaced with the standard intercooler - a true plug-and-play experience. With a test up to 6 bar and proven pressure stability, this intercooler is perfect for racing. Prepare yourself for a whole new driving experience. With our Competition high-performance intercooler for the Audi A4 B9/A5 F5, you'll reach the pinnacle of performance enhancement. Your Audi deserves only the best, treat it to the Wagner Tuning Competition high-performance intercooler. Advantages of the Wagner Tuning intercooler:- Improved cooling performance- 105% more charge air volume- Connection diameters Ø62 mm at the charge air cooler inlet and Ø67 mm at the charge air cooler outlet- optimized with the help of CFD flow analyses- Minimum back pressure- Plug and play Dimensions of original intercooler:720mm x 145mm x 80mmV=8.35 litersA=1044 cm² Wagner Tuning intercooler dimensions:550mm x 445mm x 70mmV=17.13 litersA=2447 cm² Scope of delivery:1 intercooler (black coated)1 silicone hose (black)1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.

The Competition intercooler kit is suitable for:Audi S4 B9 8W 3,0TFSI 260KW/354hp (2016+)*Audi S5 B9 F5 3,0TFSI 260KW/354hp (2016+)** The brackets supplied are only suitable for the EU model. Maximize the performance of your vehicle with our Competition high performance intercooler! Looking for a way to boost your vehicle's performance and efficiency? Our Competition high performance intercooler is the answer. Here's what you can expect from this exceptional product:Our high performance intercooler redefines the standards for performance. With net dimensions of 550 mm x 445 mm x 70 mm (equivalent to 17,130 cc), it offers an impressive 134% larger flow area and 105% more charge air volume compared to the conventional intercooler. This means that your engine receives more cooled air, resulting in a noticeable increase in performance. Our competition high performance mesh is made of high quality tube fin material with internal turbulators. This ensures maximum heat transfer and efficient airflow to keep cooling performance at the highest level.Despite its imposing size, our intercooler is surprisingly light, weighing just 9.5 kg. This minimizes the load on your vehicle and helps to improve overall performance.The kit is also available with complete charge air piping as an option. Want to get the most out of your intercooler? Our kit with complete charge air piping is the answer. It includes three reinforced silicone hoses and an aluminum charge air pipe for even better performance. The cast aluminium end boxes of our intercooler were developed and optimized with the help of flow analyses in the CFD system. The result is excellent cooling properties with minimal back pressure. All our intercoolers are equipped with an anti-corrosion coating that also has excellent heat conduction properties. This ensures permanent and optimum cooling, which is reflected in an impressive increase in performance. Our kit is completely ready to install and enables simple replacement with the standard intercooler. No complex conversion required - simply plug-and-play. Tested at up to 6 bar and pressure-stable. Our products are subject to strict quality control and are also suitable for racing. Boost the performance of your vehicle with our Competition high-performance intercooler and feel the difference every time you drive. Experience a new dimension in vehicle performance! Dimensions original intercooler:720mm x 145mm x 80mmV=8.35 litersA=1044 cm² Wagner Tuning intercooler dimensions:550mm x 445mm x 70mmV=17.13 litersA=2447 cm² Scope of delivery intercooler single:1 intercooler (black coated)1 Ø65mm aluminum charge air pipe (black coated) / optional3 reinforced silicone hoses (black) / optional1 mounting material1 assembly instructions Scope of delivery charge air cooler + charge air pipe:1 intercooler (black coated)1 Ø65mm aluminum charge air pipe (black coated) / optional3 reinforced silicone hoses (black) / optional1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.

The Wagner Tuning Competition intercooler kit is suitable for the following vehicles:Audi A4 B8 1,8 TFSI 2008-2013 (MKB:CABA, CDHA, CABB, CABD, CDHB)*.Audi A4 B8 2.0 TFSI 2008-2013 (MKB: CDNB; CAEA; CDNC; CAEB; CFKA)*Audi A4 B8 Allroad 2.0 TFSI 2008-2013 (MKB: CDNB; CAEA; CDNC; CAEB; CFKA)*Audi A5 B8 1.8 TFSI 2008-2013 (MKB:CABA, CDHA, CABB, CABD, CDHB)*Audi A5 B8 2.0 TFSI 2008-2013 (MKB: CDNB; CAEA; CDNC; CAEB; CFKA)*Audi A5 B8 Sportback 1.8 TFSI 2008-2013 (MKB:CABA, CDHA, CABB, CDHB)*Audi A5 B8 Sportback 2.0 TFSI 2008-2013 (MKB: CDNB; CAEA; CDNC; CAEB; CFKA)** Not suitable for B8.5 facelift models* For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. Please refer to our installation instructions. Experience the ultimate increase in performance with our high-performance intercooler in a class of its own. This radiator sets new standards and will take your vehicle to a whole new level of performance. With impressive net dimensions of 610 mm x 440 mm x 65 mm (equivalent to 17,446 l), our high-performance intercooler offers a breathtaking 178 % larger intake area and an incredible 158 % more charge air volume compared to the standard intercooler. Experience a noticeable increase in performance and efficient cooling like never before. Our high performance competition mesh sets the benchmark in terms of quality and performance. It is a Tube Fin mesh with internal turbulators, specifically designed to optimize airflow and maximize cooling efficiency. Despite its impressive size, our intercooler weighs just 9.1 kg, making it a real lightweight. The cast aluminium end boxes were developed using the latest CAD technology and optimized through CFD simulations for optimal internal airflow. An integrated air duct in the end box ensures even filling of the Competition high performance mesh and maximizes cooling performance. The connection diameters were set to Ø67 mm, which is why this kit is supplied with reinforced silicone hoses. With our high-performance intercooler, you will not only experience improved cooling, but also significantly reduced backpressure compared to the standard intercooler. Our intercoolers are also equipped with a high-quality anti-corrosion coating, which has excellent heat conduction properties. This not only ensures long-lasting cooling, but also achieves an impressive increase in performance. The kit is completely ready to install and enables simple replacement with the standard intercooler. Our high-performance intercooler has undergone extensive testing and is pressure-stable up to 6 bar. We attach great importance to quality and continuously monitor the manufacture of our products. You can therefore rely on first-class quality. Our high-performance intercooler is not only suitable for racing, but for every driver who wants to get the most out of their vehicle. Experience the performance you have always wanted and increase the potential of your vehicle to unimagined heights. Advantages of the Wagner Tuning intercooler:- Improved cooling performance- 178 % larger inflow area- 158 % more charge air volume- Connection diameter Ø67 mm- Reduced back pressure- Simple replacement Scope of delivery:1 intercooler2 charge air hoses4 hose clamps1 fixing material1 assembly instructionsAttention: Not approved in the area of the StVZO.

The competition package for the Audi RS4 B9 consists of the intercooler upgrade kit and the water cooler upgrade kit. Suitable for the following models: Audi RS4 B9 331KW/450hp from 2017 Audi RS5 F5 331KW/450hp from 2017 The intercooler upgrade kit: The 2.9 litre V6 biturbo engine (VW EA839) of the Audi RS4 models is equipped with an indirect charge air cooling circuit. The charge air cooling process is therefore realised by a water-cooled charge air cooler, which is replaced by the WagnerTuning high-performance charge air cooler. The WAGNERTUNING high-performance intercooler has a new type of performance mesh with dimensions of 222 mm x 200 mm x 120 mm. This was specially developed for the high demands of the RS4/RS5 engine and offers 185% more external mesh volume compared to the original intercooler. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time enables the best possible internal air flow. The cast aluminium end boxes were designed in CAD and optimised with the aid of CFD simulations. The result is excellent cooling properties with minimal back pressure. This kit is therefore also suitable for racing. Optimum cooling of the supercharged air with a significant increase in performance! All WAGNERTUNING intercoolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. Installation of the system is also uncomplicated and plug & play with the help of our installation instructions. Advantages of this product: - Significantly better cooling performance - Less back pressure - More power and torque for your engine - Mechanical relief of the turbocharger - 100% pressure resistance - 100% plug and play - Up to 4 years warrantyThe water cooler upgrade kit: The 2.9 litre V6 biturbo engine of the Audi RS4 / RS5 is equipped with an indirect charge air cooling circuit. This means that the charge air cooling process is not realised using the ambient air as a cooling medium (as usual), but with the help of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water cooler come into play. The newly developed competition racing mesh of the WAGNERTUNING high-performance water cooler increases the radiator volume of the standard water cooler by a total of 55%. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the neighbouring components (e.g. the engine water cooler behind it) sufficient airflow for heat exchange. Furthermore, the water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. Installation of the system is also straightforward and plug & play with the help of our installation instructions. Scope of delivery: 1x frontal water cooler (low-temperature circuit) 1x set of water hoses 1x assembly material 1x installation instructions Attention: Not approved in the area of the StVZO.

The Wagner Tuning Competition water cooler kit is suitable for:Audi S4 B8 245KW/333PS 11/2008 - 06/2015 SedanAudi S4 B8 245KW/333PS 11/2008 - 06/2015 AvantAudi S5 8T 245KW/333PS 08/2011 - 07/2016 CoupeAudi S5 8T 245KW/333PS 03/2009 - 03/2017 CabrioletAudi S5 8T 245KW/333PS 11/2009 - 09/2016 Sportback Maximise the performance of your Audi S4/S5 with the Wagner Tuning additional water cooler kit. The 3.0L V6 supercharged engine of the Audi S4 and S5 models is a technical masterpiece. But even the best engines can benefit from optimisation. Our auxiliary water cooler kit is the solution for improved cooling performance and optimised efficiency. In contrast to conventional cooling with ambient air, our system utilises its own cooling water circuit. This enables a direct reduction in the cooling water temperature and leads to a noticeable improvement in the cooling performance of the charge air. Our new competition racing network increases the radiator volume of the standard water cooler by an impressive 92%. The intelligent ratio between the inner and outer cooling surface ensures maximum heat transfer. At the same time, sufficient airflow is ensured for heat exchange with neighbouring components. In addition, our water coolers are equipped with a thermally conductive anti-corrosion coating that ensures a long-lasting cooling effect. Installation of the system is straightforward and almost plug-and-play thanks to our detailed installation instructions. Increase the performance and reliability of your Audi S4/S5 with the Wagner Tuning additional water cooler kit. Scope of delivery:1x additional water cooler incl. silicone hoses and installation materialAttention: Not authorised in the area of the StVZO.

Facts: Material: Carbon Manufacturer: Eventuri Expertise: Material certificate The Eventuri carbon engine cover provides extreme sportiness under the bonnet. Especially in combination with the Eventuri intake system and the slam panel (front cover), the look under the bonnet will make you salivate. Compatible vehicles:VehicleTypePowerEngine capacityEngine type Audi A4 (B8/8K)RS4 quattro331kW / 450hp4136cm³CFSA Audi A5 (B8/8T)RS5 quattro331kW / 450hp4136cm³CFSA

Facts: Material: Carbon Manufacturer: Eventuri Parts certificate: For this product a certificate is available for certain regions and vehicles (details below) The Eventuri carbon intake system for Audi B8 RS4 RS5 is designed to increase engine performance, improve handling and enhance the overall driving experience. The main aspects are the balance between aerodynamic efficiency and air intake temperature. An open system was chosen but with differences to other aftermarket airboxes. This can be recognised by the shape of the carbon housing and the position and shape of the air filter, and the airbox is manufactured using the prepreg carbon process. The official parts certificate is currently being prepared and will be available shortly. We will send the documents to all buyers who order in advance. Parts certificate The manufacturer's specifications apply to installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT Audi RS 4 (B8) e1*xx/xx*0447*.. DE/AT Audi RS 5 (B8) e1*xx/xx*0447*..Compatible vehicles:VehicleTypePowerEngine capacityEngine type Audi A4 (B8/8K)RS4 quattro331kW / 450hp4136cm³CFSA Audi A5 (B8/8T)RS5 quattro331kW / 450hp4136cm³CFSA

Facts: Power increase: 13-17PS, 15-20ft-lbV box Acceleration: 60-130mph reduced by 0.5 seconds Material: Carbon fibre Manufacturer: Eventuri Expertise: without The intake for the Audi B9 S4/S5 from Eventuri has been developed to give the turbo a less restrictive airflow while maintaining low inlet temperatures. The S5/S4 engine bay heats up very quickly, so an open system would result in better airflow but at higher inlet temperatures. Therefore, the airflow path from the front grille to the turbo inlet has been completely redesigned with a highly efficient, sealed system. The restrictive OEM airbox and the flexible plastic pipe have been replaced by a Venturi filter housing and a duct system with smooth transitions. In addition, by removing the pleated OEM pipe and replacing the filter with our patented one-piece venturi housing and rigid pipe, the airflow is much smoother as it enters the turbo inlet. The resulting increase in performance and aesthetics are ground-breaking innovations for this platform. The Eventuri difference The B9 S4/S5 Eventuri system uses our patent-pending carbon fibre housings with our bespoke Gen 2 filter, providing an aerodynamically efficient airflow path from the filter to the inlets. Not just another filter with a heat shield, but a unique design that creates the Venturi effect. The intake was VBOX tested on the road to record acceleration from 60-130mph (and 100-200Km/h). The tests were carried out on the same track - and on the same day to minimise the variables. The results show that acceleration times from 60-130mph have reduced by almost 0.5 seconds, which is a significant improvement at such speeds. This shows that the gains measured on the dyno are not representative of how the intake behaves on the road when it has the correct flow conditions - on the road the intake shows a greater gain by reducing acceleration times compared to the dyno. Summary of acceleration results: 60-130mph with original airbox = 14.72 seconds 60-130mph with Eventuri intake = 14.24 seconds 100-200mph with original airbox = 12.45 seconds 100-200mph with Eventuri intake = 12.12 seconds The improvements result from a combination of reasons: 1) The closed system keeps IATs low - especially with the front air scoop forcing air into the system. 2) The venturi housing provides a smooth transition from the filter to the intake manifold without friction. This helps the turbo to run more efficiently by maintaining laminar flow in the inlet section. 3) The entire system is made of pure pre-preg carbon fibre, which is excellent for thermal insulation. Compatible vehicles:VehicleTypePower outputEngine capacityEngine size Audi A4 (B9/8W)S4 quattro260kW / 354PS2995cm³CWGD Audi A5 (B9/F5)S5 quattro260kW / 354PS2995cm³CWGD

KW coilover springs The spring set with stepless lowering KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active. Setup - sporty and harmonious spring rates The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range. Stepless lowering Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles. Please note the conditions and instructions for this product: - depending on selection not/only for vehicles with electronic damper control - VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers) - depending on selection for vehicles with VA shock absorber diameter 48.5mm/50mm Technical info: Lowering VA/HA (mm): 0-25/0-20 Diameter VA (mm): 48.5/50 Adjustment HA: Thread Approval: Parts certificate (§19.3) Scope of delivery: Set (VA+HA) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A4 Avant (B9) B8, 8W5 08/2015- 3.0 TDI quattro Kombi Diesel 160 KW 2967 ccm 6 All-wheel drive AUDI A4 Avant (B9) B8, 8W5 08/2015- 3. 0 TDI quattro Combi Diesel 200 KW 2967 ccm 6 All-wheel drive AUDI A4 Avant (B9) B8, 8W5 08/2015- 45 TDI quattro Combi Diesel 170 KW 2967 ccm 6 All-wheel drive AUDI A4 Avant (B9) B8, 8W5 08/2015- 50 TDI Mild Hybrid quattro Combi Diesel/Electric 210 KW 2967 ccm 6 All-wheel drive AUDI A4 Avant (B9) B8, 8W5 08/2015- 50 TDI quattro Combi Diesel 210 KW 2967 ccm 6 All-wheel drive AUDI A4 Avant (B9) B8, 8W5 08/2015- S4 quattro Estate Petrol 260 KW 2995 ccm 6 All-wheel drive AUDI A4 Avant (B9) B8, 8W5 08/2015- S4 TDI Mild Hybrid quattro Estate Diesel/Electric 255 KW 2967 ccm 6 All-wheel drive AUDI A4 Avant (B9) B8, 8W5 08/2015- S4 TDI MILD HYBRID QUATTRO Estate Diesel/Electric 251 KW 2967 ccm 6 All-wheel drive AUDI A5 Cabriolet (B8) F57 11/2016- 3. 0 TDI quattro Cabriolet Diesel 160 KW 2967 ccm 6 All-wheel drive AUDI A5 Cabriolet (B8) F57 11/2016- 3. 0 TDI quattro Cabriolet Diesel 210 KW 2967 ccm 6 All-wheel drive AUDI A5 Cabriolet (B8) F57 11/2016- 50 TDI quattro Cabriolet Diesel 210 KW 2967 ccm 6 All-wheel drive AUDI A5 Cabriolet (B8) F57 11/2016- S5 quattro Cabriolet Petrol 260 KW 2995 ccm 6 All-wheel drive AUDI A5 Sportback (B8) F5A 06/2016- 3. 0 TDI quattro Hatchback Diesel 160 KW 2967 ccm 6 All-wheel drive AUDI A5 Sportback (B8) F5A 06/2016- 3. 0 TDI quattro Hatchback Diesel 200 KW 2967 ccm 6 All-wheel drive AUDI A5 Sportback (B8) F5A 06/2016- 3.0 TDI quattro Hatchback Diesel 210 KW 2967 ccm 6 All-wheel drive AUDI A5 Sportback (B8) F5A 06/2016- 45 TDI quattro Hatchback Diesel 170 KW 2967 ccm 6 All-wheel drive AUDI A5 Sportback (B8) F5A 06/2016- 50 TDI Mild Hybrid quattro Hatchback Diesel/Electric 210 KW 2967 ccm 6 All-wheel drive AUDI A5 Sportback (B8) F5A 06/2016- 50 TDI quattro Hatchback Diesel 210 KW 2967 ccm 6 All-wheel drive AUDI A5 Sportback (B8) F5A 06/2016-     S5 quattro hatchback petrol 260 KW 2995 ccm 6 all-wheel drive AUDI A5 Sportback (B8) F5A 06/2016- S5 TDI Mild Hybrid quattro hatchback diesel/electric 251 KW 2967 ccm 6 all-wheel drive AUDI A5 Sportback (B8) F5A 06/2016- S5 TDI Mild Hybrid quattro hatchback diesel/electric 255 KW 2967 ccm 6 all-wheel drive

KW coilover springs The spring set with stepless lowering KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active. Setup - sporty and harmonious spring rates The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range. Stepless lowering Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles. Please note the conditions and instructions for this product: - VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers) Technical information: Lowering VA/HA (mm): 15-40/0-25 Adjustment HA: Thread Approval: Parts certificate (§19.3) Scope of delivery: Set (VA+HA) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A4 Avant (8E) 8ED, QB6, B7 11/2004-06/2008 RS4 quattro station wagon Petrol 309 KW 4163 ccm 8 All-wheel drive AUDI A4 B7 Cabriolet (8HE) 01/2002-12/2009 RS4 quattro Cabriolet Petrol 309 KW 4163 ccm 8 All-wheel drive

KW coilover springs The spring set with stepless lowering KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active. Setup - sporty and harmonious spring rates The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range. Stepless lowering Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles. Please note the conditions and instructions for this product: - VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers) Technical information: Lowering VA/HA (mm): 15-40/0-25 Adjustment HA: Thread Approval: Parts certificate (§19.3) Scope of delivery: Set (VA+HA) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A4 (8E) 8EC, QB6, B7 11/2004-06/2008 RS4 quattro notchback Petrol 309 KW 4163 ccm 8 All-wheel drive

KW coilover springs The spring set with stepless loweringKW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active. Setup - sporty and harmonious spring ratesThe high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range. Stepless loweringSimilar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles. Please note the conditions and instructions for this product:- depending on selection not/only for vehicles with electronic damper control- VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers) Technical information:Lowering VA/HA (mm): 5-25/5-30HA adjustment: ThreadApproval: Parts certificate (§19.3)Scope of delivery: Set (VA+HA) Compatible vehicles:Manufacturer Model Version Body Fuel Performance Displacement Cylinder DriveAUDI A4 Avant (B9) B8, 8W5 08/2015- RS4 quattro estate petrol 331 KW 2894 ccm 6 all-wheel drive

KW decommissioning kit for electronic damper force adjustment - Prevents error messages when changing the suspension- Only the standard damper control is decommissioned and at the same time- prevents error messages at the same time- The function of the control unit is fully retained- Can also be used separately for other makes and OE aftermarket suspensions Compatible vehicles:Manufacturer Model Version Body Fuel Performance Displacement Cylinder DriveAUDI A4 Avant (B8) 8K5 11/2007-12/2015 RS4 quattro estate petrol 331 KW 4163 ccm 8 all-wheel driveAUDI A5 (B8) 8T3 06/2007-01/2017 RS5 quattro Coupe petrol 331 KW 4163 ccm 8 all-wheel driveAUDI A5 Cabriolet (B8) 8F7 02/2009-01/2017 RS5 quattro Cabriolet petrol 331 KW 4163 ccm 8 all-wheel drive

KW V1 coilover suspension Sportiness paired with outstanding looks. With factory pre-configured damping.Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car. Stepless loweringThe KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, the lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or on the rear axle height adjustment for non-wheel-guiding double-wishbone rear axles. The benchmark for sporty, dynamic tuning fansWith its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to increase your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasureAs a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, this warranty is valid for up to five years. - Optimally adjusted in advance- sporty and harmonious damping technology- Stainless steel technology "inox-line"- Individually height-adjustable- Tested adjustment range- Ready-to-install complete solution- High-quality components for a long service life- Complete documentation for easy handling Setup - factory pre-configured damping setupThe KW V1 has a vehicle-specific, permanently configured damper setup. The spring and the damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving. Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. The KW V1 is particularly interesting for tuning enthusiasts who prioritise the show & shine concept. Please note the conditions and instructions for this product: - VA + HA height-adjustable (threaded struts) - With variant 2 or variant 3, hardness adjustment also possible on the VA only when removed! Technical information: Lowering VA/HA (mm): 10-30/10-30 Version: V1 Hardness adjustment: none Material: stainless steel Adjustment VA/HA: thread/thread Approval: parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A4 Avant (B5) 8D5, B51 11/1994-12/2002 RS4 quattro station wagon Petrol 280 KW 2671 ccm 6 All-wheel drive

KW V1 coilover suspension Sportiness paired with outstanding looks. With factory pre-configured damping.Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car. Stepless loweringThe KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, the lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or on the rear axle height adjustment for non-wheel-guiding double-wishbone rear axles. The benchmark for sporty, dynamic tuning fansWith its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to increase your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasureAs a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, this warranty is valid for up to five years. - Optimally adjusted in advance- sporty and harmonious damping technology- Stainless steel technology "inox-line"- Individually height-adjustable- Tested adjustment range- Ready-to-install complete solution- High-quality components for a long service life- Complete documentation for easy handling Setup - factory pre-configured damping setupThe KW V1 has a vehicle-specific, permanently configured damper setup. The spring and the damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving. Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. The KW V1 is particularly interesting for tuning enthusiasts who prioritise the show & shine concept. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) - With variant 2 or variant 3, hardness adjustment also possible on the VA only when removed! Technical information: Lowering VA/HA (mm): 15-45/10-30 Version: V1 Hardness adjustment: none Material: stainless steel Adjustment VA/HA: thread/thread Approval: parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A4 Avant (8E) 8ED, QB6, B7 11/2004-06/2008 RS4 quattro station wagon Petrol 309 KW 4163 ccm 8 All-wheel drive AUDI A4 B7 Cabriolet (8HE) 01/2002-12/2009 RS4 quattro Cabriolet Petrol 309 KW 4163 ccm 8 All-wheel drive

KW V1 coilover suspension Sportiness paired with outstanding looks. With factory pre-configured damping.Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car. Stepless loweringThe KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, the lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or on the rear axle height adjustment for non-wheel-guiding double-wishbone rear axles. The benchmark for sporty, dynamic tuning fansWith its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to increase your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasureAs a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, this warranty is valid for up to five years. - Optimally adjusted in advance- sporty and harmonious damping technology- Stainless steel technology "inox-line"- Individually height-adjustable- Tested adjustment range- Ready-to-install complete solution- High-quality components for a long service life- Complete documentation for easy handling Setup - factory pre-configured damping setupThe KW V1 has a vehicle-specific, permanently configured damper setup. The spring and the damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving. Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. The KW V1 is particularly interesting for tuning enthusiasts who prioritise the show & shine concept. Please note the conditions and instructions for this product: - VA + HA height adjustable (VA coilover struts, HA springs with height adjustment + damper) - With variant 2 or variant 3, hardness adjustment also possible on the VA only when removed! Technical information: Lowering VA/HA (mm): 15-45/10-30 Version: V1 Hardness adjustment: none Material: stainless steel Adjustment VA/HA: thread/thread Approval: parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A4 (8E) 8EC, QB6, B7 11/2004-06/2008 RS4 quattro notchback Petrol 309 KW 4163 ccm 8 All-wheel drive

KW V3 coilover suspension Unlimited individuality for performance & comfort. Separate damper force adjustment for rebound and compression damping.As with every KW coilover suspension, our suspension engineers also develop a sporty and harmonious basic set-up for the vehicle-specific applications of the KW V3. In addition to tests on our KW 7-post driving dynamics test bench, we also carry out extensive test drives on country roads, the motorway and even on the Nürburgring Nordschleife, kilometre by kilometre, to guarantee you the perfect suspension set-up. For years, the KW V3, one of the world's top aftermarket products, has been the reference for coilover suspensions. With its damper characteristics, high-quality workmanship and excellent durability, it has impressed discerning sports car drivers, tuners, large and small series manufacturers such as Alpina, MTM, Manthey, Oettinger and many other well-known companies in the international automotive industry. Cutting-edge technology from motorsportYou get much more than a sporty lowering and excellent handling on all roads with the KW V3. It is based on our many years of experience as a suspension manufacturer and supplier in international motorsport, such as in the ADAC GT Masters touring car series, FIA GT1, FIA GT3, International GT Open, WTC, VLN and also in the legendary ADAC Zurich 24h Race Nürburgring.Similar to our racing coilovers from the KW Competition programme, the rebound and compression damping of the KW V3 can be adjusted independently of each other. This individual tuning option is appreciated by tuners, sports car manufacturers, tuners and demanding drivers worldwide. The perfect suspension setup for significantly more driving dynamicsIf you have already carried out initial performance modifications to your sporty road vehicle, it is easy to incorporate these into the damper set-up in a targeted manner with the KW V3. The patented KW valve technology for the separate adjustment of the rebound and compression damping allows you to customise the vehicle-specific basic set-up from KW. For example, the KW bottom valve, which can be adjusted in twelve clicks in the low-speed range of the compression stage, gives you the freedom to even take the tyre characteristics of your high and ultra-high performance road tyres into account in the suspension set-up.Thanks to the patented compression adjustment at the lower piston end of the stainless steel housing, you don't even need any tools. The adjustable compression adjustment with its twelve precise clicks allows you to influence body roll and body roll movements by hand without having to change the rebound damping to match the spring rate.With the individually adjustable rebound damping of the KW V3, you can directly influence the handling and comfort through the exact click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery.By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car tracks more accurately and you have even more stability at higher cornering speeds. If, for example, you change from the approved wheel/tyre combinations of your car manufacturer to larger rims, you can use the KW V3 to perfectly match the handling of your car and your new alloy wheels. High-quality, customised and durableThe KW V3 is subjected to extensive quality tests during production and every single damper is checked. This is the only way we can fulfil our claim to provide a warranty of up to five years when a KW coilover suspension V3 is installed by a KW specialist dealer. Due to the filigree workmanship and the use of high-quality components, the KW coilover struts made of stainless steel, for example, are 100 per cent rust-free and have an unlimited service life.This means that the functionality of the stepless lowering system via the dirt-resistant KW trapezoidal thread and the KW polyamide threaded ring is not impaired even after many years. Thanks to the individual lowering with its stepless adjustment range, you can also emphasise the sportiness of your vehicle visually. A feature that is very popular in the performance-orientated tuning scene. - Freely adjustable damping technology in rebound and compression damping- inox-line stainless steel technology- Individual, stepless lowering- Tested adjustment range- high-quality components for a long service life- adjustable rebound damping with 16 exact clicks- 12-way adjustable compression damping with click adjustment- Unique, independently acting damping force adjustment Setup: The individually adjustable rebound & compression damping of the KW V3The KW V3 is the ideal accessory for performance-orientated drivers and tuning enthusiasts who demand a high level of sportiness from their vehicles. The dampers, which are separately adjustable in rebound and compression, allow extensive damper tuning with their sophisticated click adjustment. This makes it easy to directly influence the turn-in behaviour, directional stability, tyre grip and handling characteristics for safe controllability at the limit. Please note the conditions and instructions for this product: - VA + HA height adjustable (coilover struts) - With variant 2 or variant 3, hardness adjustment also possible on the VA only when removed! Technical information: Lowering VA/HA (mm): 10-30/10-30 Version: V3 Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A4 Avant (B5) 8D5, B51 11/1994-12/2002 RS4 quattro station wagon Petrol 280 KW 2671 ccm 6 All-wheel drive

KW V3 coilover suspension Unlimited individuality for performance & comfort. Separate damper force adjustment for rebound and compression damping.As with every KW coilover suspension, our suspension engineers also develop a sporty and harmonious basic set-up for the vehicle-specific applications of the KW V3. In addition to tests on our KW 7-post driving dynamics test bench, we also carry out extensive test drives on country roads, the motorway and even on the Nürburgring Nordschleife, kilometre by kilometre, to guarantee you the perfect suspension set-up. For years, the KW V3, one of the world's top aftermarket products, has been the reference for coilover suspensions. With its damper characteristics, high-quality workmanship and excellent durability, it has impressed discerning sports car drivers, tuners, large and small series manufacturers such as Alpina, MTM, Manthey, Oettinger and many other well-known companies in the international automotive industry. Cutting-edge technology from motorsportYou get much more than a sporty lowering and excellent handling on all roads with the KW V3. It is based on our many years of experience as a suspension manufacturer and supplier in international motorsport, such as in the ADAC GT Masters touring car series, FIA GT1, FIA GT3, International GT Open, WTC, VLN and also in the legendary ADAC Zurich 24h Race Nürburgring.Similar to our racing coilovers from the KW Competition programme, the rebound and compression damping of the KW V3 can be adjusted independently of each other. This individual tuning option is appreciated by tuners, sports car manufacturers, tuners and demanding drivers worldwide. The perfect suspension setup for significantly more driving dynamicsIf you have already carried out initial performance modifications to your sporty road vehicle, it is easy to incorporate these into the damper set-up in a targeted manner with the KW V3. The patented KW valve technology for the separate adjustment of the rebound and compression damping allows you to customise the vehicle-specific basic set-up from KW. For example, the KW bottom valve, which can be adjusted in twelve clicks in the low-speed range of the compression stage, gives you the freedom to even take the tyre characteristics of your high and ultra-high performance road tyres into account in the suspension set-up.Thanks to the patented compression adjustment at the lower piston end of the stainless steel housing, you don't even need any tools. The adjustable compression adjustment with its twelve precise clicks allows you to influence body roll and body roll movements by hand without having to change the rebound damping to match the spring rate.With the individually adjustable rebound damping of the KW V3, you can directly influence the handling and comfort through the exact click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery.By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car tracks more accurately and you have even more stability at higher cornering speeds. If, for example, you change from the approved wheel/tyre combinations of your car manufacturer to larger rims, you can use the KW V3 to perfectly match the handling of your car and your new alloy wheels. High-quality, customised and durableThe KW V3 is subjected to extensive quality tests during production and every single damper is checked. This is the only way we can fulfil our claim to provide a warranty of up to five years when a KW coilover suspension V3 is installed by a KW specialist dealer. Due to the filigree workmanship and the use of high-quality components, the KW coilover struts made of stainless steel, for example, are 100 per cent rust-free and have an unlimited service life.This means that the functionality of the stepless lowering system via the dirt-resistant KW trapezoidal thread and the KW polyamide threaded ring is not impaired even after many years. Thanks to the individual lowering with its stepless adjustment range, you can also emphasise the sportiness of your vehicle visually. A feature that is very popular in the performance-orientated tuning scene. - Freely adjustable damping technology in rebound and compression damping- inox-line stainless steel technology- Individual, stepless lowering- Tested adjustment range- high-quality components for a long service life- adjustable rebound damping with 16 exact clicks- 12-way adjustable compression damping with click adjustment- Unique, independently acting damping force adjustment Setup: The individually adjustable rebound & compression damping of the KW V3The KW V3 is the ideal accessory for performance-orientated drivers and tuning enthusiasts who demand a high level of sportiness from their vehicles. The dampers, which are separately adjustable in rebound and compression, allow extensive damper tuning with their sophisticated click adjustment. This makes it easy to directly influence the turn-in behaviour, directional stability, tyre grip and handling characteristics for safe controllability at the limit. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) - With variant 2 or variant 3, hardness adjustment also possible on the VA only when removed! Technical information: Lowering VA/HA (mm): 15-45/10-30 Version: V3 Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A4 Avant (8E) 8ED, QB6, B7 11/2004-06/2008 RS4 quattro station wagon Petrol 309 KW 4163 ccm 8 All-wheel drive AUDI A4 B7 Cabriolet (8HE) 01/2002-12/2009 RS4 quattro Cabriolet Petrol 309 KW 4163 ccm 8 All-wheel drive

KW V3 coilover suspension Unlimited individuality for performance & comfort. Separate damper force adjustment for rebound and compression damping.As with every KW coilover suspension, our suspension engineers also develop a sporty and harmonious basic set-up for the vehicle-specific applications of the KW V3. In addition to tests on our KW 7-post driving dynamics test bench, we also carry out extensive test drives on country roads, the motorway and even on the Nürburgring Nordschleife, kilometre by kilometre, to guarantee you the perfect suspension set-up. For years, the KW V3, one of the world's top aftermarket products, has been the reference for coilover suspensions. With its damper characteristics, high-quality workmanship and outstanding durability, it has impressed discerning sports car drivers, tuners, large and small series manufacturers such as Alpina, MTM, Manthey, Oettinger and many other well-known companies in the international automotive industry. Cutting-edge technology from motorsportYou get much more than a sporty lowering and excellent handling on all roads with the KW V3. It is based on our many years of experience as a suspension manufacturer and supplier in international motorsport, such as in the ADAC GT Masters touring car series, FIA GT1, FIA GT3, International GT Open, WTC, VLN and also in the legendary ADAC Zurich 24h Race Nürburgring.Similar to our racing coilovers from the KW Competition programme, the rebound and compression damping of the KW V3 can be adjusted independently of each other. This individual tuning option is appreciated by tuners, sports car manufacturers, tuners and demanding drivers worldwide. The perfect suspension setup for significantly more driving dynamicsIf you have already carried out initial performance modifications to your sporty road vehicle, it is easy to incorporate these into the damper set-up in a targeted manner with the KW V3. The patented KW valve technology for the separate adjustment of the rebound and compression damping allows you to customise the vehicle-specific basic set-up from KW. For example, the KW bottom valve, which can be adjusted in twelve clicks in the low-speed range of the compression damping, gives you the freedom to even take the tyre characteristics of your high and ultra-high performance road tyres into account in the suspension set-up.Thanks to the patented compression adjustment at the lower piston end of the stainless steel housing, you don't even need any tools. The adjustable compression adjustment with its twelve precise clicks allows you to influence body roll and body roll movements by hand without having to change the rebound damping to match the spring rate.With the individually adjustable rebound damping of the KW V3, you can directly influence the handling and comfort through the exact click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery.By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car tracks more accurately and you have even more stability at higher cornering speeds. If, for example, you change from the approved wheel/tyre combinations of your car manufacturer to larger rims, you can use the KW V3 to perfectly match the handling of your car and your new alloy wheels. High-quality, customised and durableThe KW V3 is subjected to extensive quality tests during production and every single damper is checked. This is the only way we can fulfil our claim to provide a warranty of up to five years when a KW coilover suspension V3 is installed by a KW specialist dealer. Due to the filigree workmanship and the use of high-quality components, the KW coilover struts made of stainless steel, for example, are 100 per cent rust-free and have an unlimited service life.This means that the functionality of the stepless lowering system via the dirt-resistant KW trapezoidal thread and the KW polyamide threaded ring is not impaired even after many years. Thanks to the individual lowering with its stepless adjustment range, you can also emphasise the sportiness of your vehicle visually. A feature that is very popular in the performance-orientated tuning scene. - Freely adjustable damping technology in rebound and compression damping- inox-line stainless steel technology- Individual, stepless lowering- Tested adjustment range- high-quality components for a long service life- adjustable rebound damping with 16 exact clicks- 12-way adjustable compression damping with click adjustment- Unique, independently acting damping force adjustment Setup: The individually adjustable rebound & compression damping of the KW V3The KW V3 is the ideal accessory for performance-orientated drivers and tuning enthusiasts who demand a high level of sportiness from their vehicles. The dampers, which are separately adjustable in rebound and compression, allow extensive damper tuning with their sophisticated click adjustment. This makes it easy to directly influence the turn-in behaviour, directional stability, tyre grip and handling characteristics for safe controllability at the limit. Please note the conditions and instructions for this product:- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper)- With variant 2 or variant 3, hardness adjustment also possible on the VA only when removed! Technical information:Lowering VA/HA (mm): 15-45/10-30Version: V3Hardness adjustment: Rebound and compression stageMaterial: Stainless steelAdjustment VA/HA: thread/threadApproval: Parts certificate (§19.3) Compatible vehicles:Manufacturer Model Version Body Fuel Performance Displacement Cylinder DriveAUDI A4 (8E) 8EC, QB6, B7 11/2004-06/2008 RS4 quattro notchback petrol 309 KW 4163 ccm 8 all-wheel drive

KW V3 coilover suspension Unlimited individuality for performance & comfort. Damper force adjustment separately for rebound & compression.As with every KW coilover suspension, our suspension engineers also develop a sporty and harmonious basic set-up for the vehicle-specific applications of the KW V3. In addition to tests on our KW 7-post driving dynamics test bench, we also carry out extensive test drives on country roads, the motorway and even on the Nürburgring Nordschleife, kilometre by kilometre, to guarantee you the perfect suspension set-up. For years, the KW V3, one of the world's top aftermarket products, has been the reference for coilover suspensions. With its damper characteristics, high-quality workmanship and outstanding durability, it has impressed discerning sports car drivers, tuners, large and small series manufacturers such as Alpina, MTM, Manthey, Oettinger and many other well-known companies in the international automotive industry. Cutting-edge technology from motorsportYou get much more than a sporty lowering and excellent handling on all roads with the KW V3. It is based on our many years of experience as a suspension manufacturer and supplier in international motorsport, such as in the ADAC GT Masters touring car series, FIA GT1, FIA GT3, International GT Open, WTC, VLN and also in the legendary ADAC Zurich 24h Race Nürburgring.Similar to our racing coilovers from the KW Competition programme, the rebound and compression damping of the KW V3 can be adjusted independently of each other. This individual tuning option is appreciated by tuners, sports car manufacturers, tuners and demanding drivers worldwide. The perfect suspension setup for significantly more driving dynamicsIf you have already carried out initial performance modifications to your sporty road vehicle, it is easy to incorporate these into the damper set-up in a targeted manner with the KW V3. The patented KW valve technology for the separate adjustment of the rebound and compression damping allows you to customise the vehicle-specific basic set-up from KW. For example, the KW bottom valve, which can be adjusted in twelve clicks in the low-speed range of the compression damping, gives you the freedom to even take the tyre characteristics of your high and ultra-high performance road tyres into account in the suspension set-up.Thanks to the patented compression adjustment at the lower piston end of the stainless steel housing, you don't even need any tools. The adjustable compression adjustment with its twelve precise clicks allows you to influence body roll and body roll movements by hand without having to change the rebound damping to match the spring rate.With the individually adjustable rebound damping of the KW V3, you can directly influence the handling and comfort through the exact click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery.By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car tracks more accurately and you have even more stability at higher cornering speeds. If, for example, you change from the approved wheel/tyre combinations of your car manufacturer to larger rims, you can use the KW V3 to perfectly match the handling of your car and your new alloy wheels. High-quality, customised and durableThe KW V3 is subjected to extensive quality tests during production and every single damper is checked. This is the only way we can fulfil our claim to provide a warranty of up to five years when a KW coilover suspension V3 is installed by a KW specialist dealer. Due to the filigree workmanship and the use of high-quality components, the KW coilover struts made of stainless steel, for example, are 100 per cent rust-free and have an unlimited service life.This means that the functionality of the stepless lowering system via the dirt-resistant KW trapezoidal thread and the KW polyamide threaded ring is not impaired even after many years. Thanks to the individual lowering with its stepless adjustment range, you can also emphasise the sportiness of your vehicle visually. A feature that is very popular in the performance-orientated tuning scene. - Freely adjustable damping technology in rebound and compression damping- inox-line stainless steel technology- Individual, stepless lowering- Tested adjustment range- high-quality components for a long service life- adjustable rebound damping with 16 exact clicks- 12-way adjustable compression damping with click adjustment- Unique, independently acting damping force adjustment Setup: The individually adjustable rebound & compression damping of the KW V3The KW V3 is the ideal accessory for performance-orientated drivers and tuning enthusiasts who demand a high level of sportiness from their vehicles. The dampers, which are separately adjustable in rebound and compression, allow extensive damper tuning with their sophisticated click adjustment. This makes it easy to directly influence the turn-in behaviour, directional stability, tyre grip and handling characteristics for safe controllability at the limit. Please note the conditions and instructions for this product:- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + dampers)- Electronic damper control must be deactivated.- Dampers have easy-to-operate adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible.- Only for vehicles with VA shock absorber diameter 50mm (not 48.5mm) Technical info:Lowering VA/HA (mm): 10-35/10-35Version: V3Hardness adjustment: Rebound and compression stageMaterial: Stainless steelAdjustment VA/HA: Thread/threadDiameter VA (mm): 50Approval: Parts certificate (§19.3) Compatible vehicles:Manufacturer Model Version Body Fuel Performance Displacement Cylinder DriveAUDI A4 Avant (B9) B8, 8W5 08/2015- S4 quattro estate petrol 260 KW 2995 ccm 6 all-wheel driveAUDI A4 Avant (B9) B8, 8W5 08/2015- S4 TDI Mild Hybrid quattro estate diesel/electric 255 KW 2967 ccm 6 all-wheel driveAUDI A4 Avant (B9) B8, 8W5 08/2015- S4 TDI MILD HYBRID QUATTRO estate diesel/electric 251 KW 2967 ccm 6 all-wheel driveAUDI A5 Sportback (B8) F5A 06/2016- S5 quattro hatchback petrol 260 KW 2995 ccm 6 all-wheel driveAUDI A5 Sportback (B8) F5A 06/2016- S5 TDI Mild Hybrid quattro hatchback diesel/electric 251 KW 2967 ccm 6 all-wheel driveAUDI A5 Sportback (B8) F5A 06/2016- S5 TDI Mild Hybrid quattro Hatchback Diesel/Electric 255 KW 2967 ccm 6 All-wheel drive

KW V3 coilover suspension Unlimited individuality for performance & comfort. Separate damper force adjustment for rebound and compression damping.As with every KW coilover suspension, our suspension engineers also develop a sporty and harmonious basic set-up for the vehicle-specific applications of the KW V3. In addition to tests on our KW 7-post driving dynamics test bench, we also carry out extensive test drives on country roads, the motorway and even on the Nürburgring Nordschleife, kilometre by kilometre, to guarantee you the perfect suspension set-up. For years, the KW V3, one of the world's top aftermarket products, has been the reference for coilover suspensions. With its damper characteristics, high-quality workmanship and outstanding durability, it has impressed discerning sports car drivers, tuners, large and small series manufacturers such as Alpina, MTM, Manthey, Oettinger and many other well-known companies in the international automotive industry. Cutting-edge technology from motorsportYou get much more than a sporty lowering and excellent handling on all roads with the KW V3. It is based on our many years of experience as a suspension manufacturer and supplier in international motorsport, such as in the ADAC GT Masters touring car series, FIA GT1, FIA GT3, International GT Open, WTC, VLN and also in the legendary ADAC Zurich 24h Race Nürburgring.Similar to our racing coilovers from the KW Competition programme, the rebound and compression damping of the KW V3 can be adjusted independently of each other. This individual tuning option is appreciated by tuners, sports car manufacturers, tuners and demanding drivers worldwide. The perfect suspension setup for significantly more driving dynamicsIf you have already carried out initial performance modifications to your sporty road vehicle, it is easy to incorporate these into the damper set-up in a targeted manner with the KW V3. The patented KW valve technology for the separate adjustment of the rebound and compression damping allows you to customise the vehicle-specific basic set-up from KW. For example, the KW bottom valve, which can be adjusted in twelve clicks in the low-speed range of the compression damping, gives you the freedom to even take the tyre characteristics of your high and ultra-high performance road tyres into account in the suspension set-up.Thanks to the patented compression adjustment at the lower piston end of the stainless steel housing, you don't even need any tools. The adjustable compression adjustment with its twelve precise clicks allows you to influence body roll and body roll movements by hand without having to change the rebound damping to match the spring rate.With the individually adjustable rebound damping of the KW V3, you can directly influence the handling and comfort through the exact click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery.By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car tracks more accurately and you have even more stability at higher cornering speeds. If, for example, you change from the approved wheel/tyre combinations of your car manufacturer to larger rims, you can use the KW V3 to perfectly match the handling of your car and your new alloy wheels. High-quality, customised and durableThe KW V3 is subjected to extensive quality tests during production and every single damper is checked. This is the only way we can fulfil our claim to provide a warranty of up to five years when a KW coilover suspension V3 is installed by a KW specialist dealer. Due to the filigree workmanship and the use of high-quality components, the KW coilover struts made of stainless steel, for example, are 100 per cent rust-free and have an unlimited service life.This means that the functionality of the stepless lowering system via the dirt-resistant KW trapezoidal thread and the KW polyamide threaded ring is not impaired even after many years. Thanks to the individual lowering with its stepless adjustment range, you can also emphasise the sportiness of your vehicle visually. A feature that is very popular in the performance-orientated tuning scene. - Freely adjustable damping technology in rebound and compression damping- inox-line stainless steel technology- Individual, stepless lowering- Tested adjustment range- high-quality components for a long service life- adjustable rebound damping with 16 exact clicks- 12-way adjustable compression damping with click adjustment- Unique, independently acting damping force adjustment Setup: The individually adjustable rebound & compression damping of the KW V3The KW V3 is the ideal accessory for performance-orientated drivers and tuning enthusiasts who demand a high level of sportiness from their vehicles. The dampers, which are separately adjustable in rebound and compression, allow extensive damper tuning with their sophisticated click adjustment. This makes it easy to directly influence the turn-in behaviour, directional stability, tyre grip and handling characteristics for safe controllability at the limit. Please note the conditions and instructions for this product:- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper)- For vehicles with electronic damper control, this must be deactivated.- Dampers have easy-to-operate adjustment wheels. Due to the design, the rebound stage can only be adjusted if the piston rod is accessible.- Only for vehicles with VA shock absorber diameter 48.5mm (not 50mm) Technical information:Lowering VA/HA (mm): 15-35/20-40Version: V3Hardness adjustment: Rebound and compression stageMaterial: Stainless steelAdjustment VA/HA: thread/threadDiameter VA (mm): 48.5Approval: Parts certificate (§19.3) Compatible vehicles (with DRC):AUDI A4 Avant (B9) B8, 8W5 08/2015- RS4 quattro estate petrol 331 KW 2894 ccm 6 all-wheel drive

KW V3 levelling You can't see it - you can FEEL IT!The KW levelling suspensions are ideal for drivers who are not looking for maximum lowering, but are looking for the driving dynamics and driving comfort of a KW coilover suspension in combination with the almost original standard ground clearance. The KW V3 Levelling focuses on the combination of increased driving dynamics and driving comfort in conjunction with a minimum lowering or, if desired, raising. The KW V3 Leveling is the ideal retrofit suspension for frequent drivers on poorly developed secondary roads or drivers who mainly use their car in metropolises and urban areas with numerous speed bumps. The progressive suspension springs are clearly designed for increased ride comfort. Accordingly, the KW V3 levelling has an adjustable, comfort-oriented basic damper tuning. If required, the KW levelling enables an adapted level regulation in the range of + 5 - 20 mm. The KW V3 Levelling is the ideal retrofit option for drivers who attach great importance to suitability for everyday use, increased ride comfort and a plus in sportiness. The separately adjustable dampers in compression and rebound with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to influence the turn-in behaviour, directional stability, tyre grip and handling characteristics significantly for safe controllability at the limit and increased ride comfort. - Freely adjustable damping technology in rebound and compression damping- inox-line stainless steel technology- Individual stepless levelling adjustment- Tested adjustment range- high-quality components for a long service life- Adjustable rebound damping with 16 precise clicks- 12-way adjustable compression damping with click adjustment- Unique, independently acting damping force adjustment Please note the conditions and instructions for this product:- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper)- Electronic damper control must be deactivated. The electronic kit for decommissioning is optionally included in the scope of delivery, depending on the selection.- Dampers have easy-to-operate adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible. Technical information:Level change (mm) between: VA -10 and +5 / HA -5 and +10Version: V3 levellingHardness adjustment: Rebound and compression stageMaterial: Stainless steelAdjustment VA/HA: thread/threadApproval: Parts certificate (§19.3) Compatible vehicles:Manufacturer Model Version Body Fuel Performance Displacement Cylinder DriveAUDI A4 Avant (B8) 8K5 11/2007-12/2015 RS4 quattro estate petrol 331 KW 4163 ccm 8 all-wheel drive

KW V4 coilover suspension incl. support bearings - State of the Art With the new KW V4 with its stainless steel or aluminium coilover struts, you give your super sports car the necessary reserves to further increase the driving dynamics. The three-way adjustable high-performance dampers with their independent adjustment of the rebound, low-speed and high-speed compression damping are based on the successful racing technology of the multiple overall winner of the ADAC Zurich 24h Race Nürburgring and, depending on the vehicle-specific version, have aluminium support bearings. The new KW V4 is developed exclusively for selected high-performance vehicles, which can be moved more safely at the limits of driving dynamics thanks to our KW suspension technology. - 3-way adjustable high-performance dampers with stainless steel coilover struts- Separate and independent damper adjustment in:- Rebound damping with 16 exact clicks + (firmer) / - (more comfortable)- Low-speed compression damping with 6 exact clicks + (firmer) / - (more comfortable)- High-speed compression damping with 14 exact clicks + (firmer) / - (more comfortable)- Two basic set-ups ex works with comfort setting and performance setting- Depending on the vehicle, aluminium support bearings are an integral part of the scope of delivery Please note the conditions and instructions for this product:- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + dampers)- Electronic damper control must be deactivated. - Dampers have easy-to-operate adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible.- Only for vehicles with VA shock absorber diameter 48.5mm (not 50mm)- Variant 4 / Variant 5 Aluminium struts / dampers or combined aluminium and stainless steel on each axle Technical information:Lowering VA/HA (mm): 15-35/20-40Version: V4Hardness adjustment: Rebound and compression stageMaterial: AluminiumAdjustment VA/HA: thread/threadApproval: Parts certificate (§19.3) Compatible vehicles:Manufacturer Model Version Body Fuel Performance Displacement Cylinder DriveAUDI A4 Avant (B9) B8, 8W5 08/2015- RS4 quattro estate petrol 331 KW 2894 ccm 6 all-wheel drive

Plug and Play suitable for the following models:Audi RS4 B9 331KW/450hp from 2017Audi RS5 F5 331KW/450hp from 2017 onwards Experience ultimate performance with our Wagner Tuning high-performance intercooler for the Audi RS4/RS5! Our high-performance intercooler was specially developed for the demanding 2.9 liter V6 biturbo engine (VW EA839) of the Audi RS4/RS5 models. It replaces the standard water-cooled intercooler and offers you a multitude of advantages. With our new performance mesh, which measures 222 mm x 200 mm x 120 mm, we have increased the external mesh volume by an impressive 185%. The optimal ratio between internal and external cooling surface ensures maximum heat transfer and optimal internal airflow. The cast aluminum end boxes were designed in CAD and perfected using CFD simulations. The result is outstanding cooling properties with minimal back pressure. Our high-performance intercooler is therefore also ideally suited for racing and ensures optimum cooling of the supercharged air with a significant increase in performance. For a long-lasting and reliable cooling effect, all our Wagner Tuning intercoolers are equipped with a thermally conductive anti-corrosion coating. Installation of the system is uncomplicated thanks to our detailed installation instructions and is carried out using the plug & play method. The advantages at a glance:- Significantly improved cooling performance for optimum power delivery- Minimized back pressure for optimized performance- More power and torque for a more intense driving experience- Mechanical relief of the turbocharger for a longer service life- 100% pressure resistance for maximum reliability- Simple and easy plug & play installation- Up to 4-year warranty for a worry-free driving experience Take your Audi RS4/RS5 to a new level of performance with our Wagner Tuning high-performance intercooler. Experience outstanding cooling performance and maximum performance in every race! Mesh dimensions OEM intercooler:220 mm x 100 mm x 85 mmV = 1.87 liters Mesh dimensions Wagner Tuning intercooler:222 mm x 200 mm x 120 mmV = 5.33 liters Scope of delivery:1 intercooler2 silicone air hoses6 cooling water hoses1 mounting material1 installation instructionAttention: Not approved in the area of the StVZO.

The silicone hose kit EVO 1 is suitable for:Audi RS4 B5 2,7 BiTurbo 280KW/380hp Maximize the performance of your Audi RS4 B5 with our state-of-the-art silicone hose kit EVO1. Designed for performance enthusiasts, this kit provides optimal airflow and improved durability to take your vehicle's performance to the next level. Precision Manufactured Silicone Hoses: The four silicone hoses in this kit are precision manufactured to ensure a perfect fit and effortless installation. High-quality materials: Made from high-quality silicone and reinforced hose clamps, the components of this kit are extremely heat-resistant and durable, even under extreme operating conditions. Improved performance: With optimized air routing, the kit contributes to improved engine performance by maximizing airflow and minimizing pressure loss. Exclusive compatibility: This hose kit is exclusively compatible with our Wagner Tuning intercooler to ensure seamless integration and optimize the performance of your Audi RS4 B5. Scope of delivery:4 silicone hoses8 hose clamps Attention: This hose kit is only compatible with our Wagner Tuning intercooler EVO 2. Note: Please note that the article image is for illustrative purposes only and the actual shape of the kit may differ slightly.

The EVO 2 silicone hose kit is suitable for:Audi RS4 B5 2,7 BiTurbo 280KW/380hp Maximize the performance of your Audi RS4 B5 with our state of the art silicone hose kit EVO2. Designed for performance enthusiasts, this kit provides optimal airflow and improved durability to take your vehicle's performance to the next level. Precision Manufactured Silicone Hoses: The four silicone hoses in this kit are precision manufactured to ensure a perfect fit and effortless installation. High quality materials: Made from high quality silicone and reinforced hose clamps, the components of this kit are extremely heat resistant and durable, even under extreme operating conditions. Improved performance: With optimized air routing, the kit contributes to improved engine performance by maximizing airflow and minimizing pressure loss. Exclusive compatibility: This hose kit is exclusively compatible with our Wagner Tuning intercooler to ensure seamless integration and optimize the performance of your Audi RS4 B5. Scope of delivery:4 silicone hoses8 hose clamps Attention: This hose kit is only compatible with our Wagner Tuning intercooler EVO 2. Note: Please note that the article image is for illustrative purposes only and the actual shape of the kit may differ slightly.

The Wagner Tuning silicone hose kit is suitable for the following vehicles:Audi A4 B8 1,8 TFSI 2008-2013 (MKB:CABA, CDHA, CABB, CABD, CDHB)*Audi A4 B8 2.0 TFSI 2008-2013 (MKB: CDNB; CAEA; CDNC; CAEB; CFKA)*Audi A4 B8 Allroad 2.0 TFSI 2008-2013 (MKB: CDNB; CAEA; CDNC; CAEB; CFKA)*Audi A5 B8 1.8 TFSI 2008-2013 (MKB:CABA, CDHA, CABB, CABD, CDHB)*Audi A5 B8 2.0 TFSI 2008-2013 (MKB: CDNB; CAEA; CDNC; CAEB; CFKA)*Audi A5 B8 Sportback 1.8 TFSI 2008-2013 (MKB:CABA, CDHA, CABB, CDHB)*Audi A5 B8 Sportback 2.0 TFSI 2008-2013 (MKB: CDNB; CAEA; CDNC; CAEB; CFKA)** Not suitable for B8.5 facelift modelsOptimize the performance and reliability of your Audi A4/A5 1.8 TFSI with the high-quality silicone hose kit from Wagner Tuning. Designed to improve intercooling and ensure a perfect fit, this kit offers a customized solution for your Audi. Compatibility:The silicone hose kit is exclusively compatible with our original intercooler and offers a hassle-free integration into Audi A4/A5 1.8 TFSI models. High quality material: The charge air hoses are made of high-quality silicone material that provides excellent heat and pressure resistance and is designed for long-lasting performance.Improved performance: By optimizing airflow, engine cooling performance is improved, resulting in increased power and responsive driving.Easy installation: Supplied with four hose clamps, the kit is simple and straightforward to install with no additional modifications required.Customized fit: The kit is specifically tailored to the Audi A4/A5 1.8 TFSI and offers a perfect fit as well as optimum performance. Attention: This hose kit is only compatible with the original Wagner Tuning intercooler. Scope of delivery:2 charge air hoses4 hose clamps Note: The article image is for illustrative purposes only. The actual shape of the product may differ slightly.

Facts: Material: Carbon Manufacturer: Eventuri Expertise: Material Expertise Compatible vehicles:VehicleVehicle typePower outputDisplacementEngine type Audi A4 (B8/8K)RS4 quattro331kW / 450PS4136ccCFSA

One filter per item. Please order one or two filters depending on the system. Customised filter design We are pleased to introduce our customised filter design for 2018. This filter is a proprietary design developed to deliver optimal airflow through our Eventuri housings where the filter is mounted backwards. It is a direct replacement for all our systems fitted with Eventuri carbon filter housings and factory fitted in all new intake systems from 2018. Filtration and construction Unlike many other suppliers who use a conventional filter, we have carried out extensive research and development and invested significant resources in our own unique filter design, which is optimally suited to our patented backward orientated filter shape. The filter media consists of a non-woven mesh and is tested to ISO 5011, which is the same filtration standard as OEM filters. The mesh is double layered and dry which means it will not damage the air mass sensors with oil. Our filters have 2 flow guide cones which have been carefully modelled to direct the airflow as follows: Internal cone - designed to direct the incoming airflow through the filter and create a uniform velocity profile along the entire length of the filter material. This cone effectively helps to distribute the airflow across the filter without turbulence. External cone - CNC machined, with a unique profile that has been extensively optimised to draw the airflow to the centre and smoothly transfer it to the downstream bags. This cone creates a controlled area of turbulence around the tip which increases the convergence speed of the air, giving the connecting hose a higher velocity profile of airflow leading to the motor. Airflow The resulting smooth flow through the filter smooths out at the outlet of the inlet with a high velocity profile. In reality, this means that the engine can draw in air very efficiently and the driver will notice a sharper throttle response as well as the power and torque improvements. If the engine has a turbocharger, it can reach its peak power earlier as it operates with less resistance. Tests have shown that our systems reduce the waste-gate duty cycle by a significant percentage compared to the OEM system. Resulting improvements Through dyno testing, where the Eventuri is sequentially recorded with the original filters against the improved filters, we have found an additional power and torque gain. This confirms our theoretical modelling and proves that the improved filters have a significant impact on the airflow through the intake. The power gains over the original filters vary between vehicles, but here are some of the results we have measured so far. Please note - these graphs show Eventuri intakes with original filters versus upgraded filters. Not against the stock airboxes - the increase in performance is huge! Which filter fits which system? Type B: Audi S1 VAG 2.0 TFSI Audi RS3 MK2 pre-facelift Audi B9 S4/S5 and RS4/RS5 BMW B58 BMW E39 M5 BMW E46 M3 BMW E6X M5/M6 BMW F90 M5 BMW F10 M5 BMW F1X M6 BMW N55 M2/M135i etc. Lamborghini Huracan Mercedes C190/R190 GTR, GTS, GT Type C Mercedes (X)205 C63(S) AMG Mercedes GLC63(S) Type C8 Audi C8 RS6/RS7 Type D Audi 8V/8S RS3/TTRS Stage 3 Audi 8Y RS3 Audi F3 RSQ3 Toyota Yaris GRType E BMW E9X M3 Type L BMW G20 B48/B46 BMW G20 B58 BMW G29 Z4M B58 BMW G29 Z4 B48 Mercedes A35 AMG, GLA35, GLB35, A250 Toyota Supra GR MK5 A90 B58/B48Type S Audi B8 RS4/RS5 Audi C7 RS6/RS7 Audi C7 S6/S7 BMW S55 M3/M4 BMW F40 M135i, F44 M235i BMW S55 M2 Competition Honda Civic FK2 Type-R Honda Civic FK8 Type-R All Mini Intakes Porsche 991 Turbo (S)

The upgrade oil cooler kit is suitable for:Audi RS4 B5 2.7 BiTurbo 280KW/380hp Optimize the performance and longevity of your Audi RS4 B5 2.7 BiTurbo with the advanced Wagner Tuning Upgrade Oil Cooler Kit. This kit has been specially developed for performance-enhanced vehicles and ensures that the oil temperatures remain in the optimum range even under extreme conditions. This guarantees constant oil pressure, which leads to improved engine performance and service life. Maximum cooling capacity: The 7-row all-aluminum oil cooler replaces the original 5-row oil cooler and offers a 112% larger cooling surface.Excellent heat dissipation: The significantly larger mesh volume efficiently reduces the oil temperature even under high loads.Robust construction: The oil cooler and air duct are coated black to prevent corrosion and ensure a long service life.Easy installation: The kit is designed for easy plug & play installation and includes an aluminum air duct for optimal air circulation. Scope of delivery:1x oil cooler (black coated)1x air duct (black coated)1x mounting material Not subject to approval:According to the KBA, oil coolers are not subject to approval, so they can be registered without a parts certificate. Why Wagner Tuning?The Wagner Tuning Upgrade oil cooler kit is the ideal solution for all Audi RS4 B5 2.7 BiTurbo owners who are looking for improved cooling and increased engine performance. With a 112% increase in cooling surface area and a robust design, this kit ensures that your vehicle is optimally cooled even in extreme conditions.Invest in the Wagner Tuning Upgrade Oil Cooler Kit and enjoy the benefits of improved cooling performance and longer engine life. Perfect for track enthusiasts and demanding drivers who want to get the best out of their vehicle.

Plug and Play suitable for the following models: Audi RS4 B9 331KW/450hp from 2017 Audi RS5 F5 331KW/450hp from 2017 The 2.9L V6 biturbo engine of the Audi RS4 / RS5 is equipped with an indirect charge air cooling circuit. This means that the charge air cooling process is not realised using the ambient air as a cooling medium (as usual), but with the help of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water cooler come into play. The newly developed competition racing mesh of the WAGNERTUNING high-performance water cooler increases the radiator volume of the standard water cooler by a total of 55%. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the neighbouring components (e.g. the engine water cooler behind it) sufficient airflow for heat exchange. Furthermore, the water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. Installation of the system is also uncomplicated and plug & play with the help of our installation instructions. OEM water cooler dimensions: 720 mm x 485 mm x 25 mm V = 8.73 litres A = 3492 cm² WT water cooler dimensions: 690 mm x 490 mm x 40 mm V = 13.52 litres A = 3381 cm² Attention: Not approved in the area of the StVZO.