MOVIT DDE steel brake system 342x34mm (6 piston calliper) for the front axle, from 18 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined. The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications. The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple layer of paint.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts Attention: The conversion means that only rims with at least 18 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. MOVIT sports brake callipers, 6-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force MOVIT sports brake discs, 342x34mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Maximum fading resistance- Special alloy for high thermal conductivity MOVIT comfort brake pads- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x assembly material1x installation instructions and running-in instructions1x parts certificate Compatible vehicles:Audi A4 / S4 8K / B8Audi A5 / S5 8TVW Beetle 5CVW Golf IV 4motionVW Golf VII GTI / GTD 57 series pistonsVW Golf VII GTI / GTD 57 series pistonsVW GOLF VII GTI Clubsport / Performance 60 series pistonsVW T5 / T6 Multivan

The Wagner Tuning Competition intercooler kit is suitable for the following vehicles:Audi A4 B8.5 1,8 TFSI 2013-2015 (MKB:CJEB/CJED/CJEE)*Audi A4 B8.5 2.0 TFSI 2013-2015 (MKB: CNCD/CNCE)*Audi A4 B8.5 Allroad 2.0 TFSI 2013-2015 (MKB: CNCD/CNCE)*Audi A5 B8.5 1.8 TFSI 2015- (MKB: CJEB/CJED/CJEE)*Audi A5 B8.5 2.0 TFSI 2013 (MKB: CNCD/CNCE)*Audi A5 B8.5 Sportback 1.8 TFSI 2015- (MKB: CJEB/CJED/CJEE)*Audi A5 B8.5 Sportback 2.0 TFSI 2013- (MKB: CNCD/CNCE)** For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. You can find information on this in our installation instructions. Immerse yourself in a world of improved performance with our high-performance intercooler. With impressive mesh dimensions of 610 mm x 440 mm x 65 mm and a substantial volume of 17,446 liters, this intercooler offers a 178% larger flow area and 158% more charge air volume compared to the factory intercooler. Our competition high-performance network, equipped with internal turbulators, sets new standards for efficiency and quality. Despite its size, this high-performance cooler weighs only 9.1 kg, which makes its performance even more impressive. The cast aluminium end boxes were developed using CAD design and optimized for optimum internal airflow using CFD simulations. An integrated air guide in the end box ensures even filling of the Competition high-performance mesh. With a connection diameter of Ø67mm, reinforced silicone hoses are supplied to further optimize the airflow. Our intercoolers are equipped with a high-quality anti-corrosion coating that not only protects against environmental influences, but also offers excellent heat conduction properties. This guarantees permanent and optimum cooling and leads to a noticeable increase in performance. Our intercooler kit is completely ready to install and only requires replacement with the factory intercooler. A simple step for a significant increase in performance. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 178% larger inflow area- 158% more charge air volume- Connection diameter of Ø67mm- Completely ready to install With pressure tests up to 6 bar, this intercooler is able to meet the requirements of racing and demanding drivers. We attach great importance to quality. Our intercooler kit is subject to constant quality monitoring to ensure that you receive only the best. Scope of delivery:1 intercooler2 charge air hoses1 aluminum pipe5 hose clamps1 mounting material1 assembly instructionAttention: Not approved in the area of the StVZO.

The Competition intercooler kit is suitable for:Audi A4 B8 2,7 TDI (140KW/190hp MKB:CAMA, CGKA)*Audi A4 B8 3,0 TDI (176KW/240hp MKB:CAPA, CCWA, CCLA)*Audi A4 B8 Allroad 3.0 TDI (176KW/240hp MKB:CAPA, CCWA, CCLA)*Audi A5 B8 2.7 TDI (140KW/190hp MKB:CAMA, CGKA)*Audi A5 B8 3.0 TDI (176KW/240hp MKB:CAPA, CCWA, CCLA)*Audi A5 Sportback 2.7 TDI (140KW/190hp MKB:CAMA, CGKA)*Audi A5 Sportback 3.0 TDI (176KW/240hp MKB:CAPA, CCWA, CCLA)** For B8.5 facelift models Part number: WT200001123* For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. You will find information on this in our installation instructions. Exceed all expectations with our Competition intercooler kit for the Audi A4 B8 Allroad 2.7 TDI! Our high-performance intercooler is the key to dramatically increasing the performance of your Audi A4 B8 Allroad 2.7 TDI. With impressive mesh dimensions of 610mm x 440mm x 65mm and a charge air volume of 17,446 liters, this intercooler offers a massive 178% larger flow area and 158% more charge air volume compared to the factory intercooler. Our Competition high-performance net is a quality tube fin net with internal turbulators. Despite its impressive size, the intercooler weighs only 9.1 kg. The cast aluminium end boxes were developed in the CAD system and optimized for optimal internal airflow using CFD simulations. An integrated air duct in the end box ensures uniform filling of the competition high-performance network. The connection diameters have been increased to Ø67 mm, which is why our kit is supplied with reinforced silicone hoses. All our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This ensures long-lasting and optimum cooling and provides a noticeable increase in performance. Our kit is completely ready to install and enables easy replacement with the factory intercooler. Our intercooler has been tested up to 6 bar and is pressure-stable, making it perfect for racing. All our products are subject to strict quality control procedures to ensure the highest standards. Your Audi A4 B8 Allroad 2.7 TDI deserves the best! Our Competition intercooler kit will take your Audi to a new level of performance and make your driving experience more exciting. Get ready to dominate the road with your Audi A4 B8 Allroad 2.7 TDI! Advantages of the Wagner Tuning intercooler:- improved cooling performance- 178% larger inflow area- 158% more charge air volume- Connection diameter increased to Ø67 mm- uncomplicated replacement Scope of delivery:1 intercooler2 charge air hoses4 hose clamps1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.

The Competition intercooler kit is suitable for:- Audi A4 B8.5 3.0 TDI (150KW/204hp MKB: CLAB)*- Audi A4 B8.5 3,0 TDI (180KW/245hp MKB: CDUC, CKVC)*- Audi A4 B8.5 Allroad 3.0 TDI (150KW/204hp MKB: CLAB)*- Audi A4 B8.5 Allroad 3.0 TDI (180KW/245hp MKB: CDUC, CKVC)*- Audi A5 B8.5 3.0 TDI (150KW/204hp MKB: CLAB)*- Audi A5 B8.5 3.0 TDI (180KW/245hp MKB: CDUC, CKVC)*- Audi A5 Sportback 3.0 TDI (150KW/204hp MKB: CLAB)*- Audi A5 Sportback 3.0 TDI (180KW/245hp MKB: CDUC, CKVC)** For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. You can find information on this in our installation instructions. Your Audi 3.0TDI deserves the best, and the best is our Wagner Tuning Competition intercooler. Experience the future of performance optimization! Our Competition mesh sets new standards in terms of cooling performance and weight. At just 9.1 kg, this intercooler is a lightweight that also offers impressive cooling performance. The freeform cast aluminum end boxes have been CAD designed to ensure optimal internal airflow. This intelligent design results in efficient cooling of your charge air. Our intercooler offers an impressive 178% more cooling surface and 158% more volume compared to the standard intercooler. This enables maximum heat transfer and increased performance. Compared to the standard intercooler, our Competition intercooler generates significantly less back pressure. This means that your engine works more efficiently and you experience a noticeable increase in performance. Our intercooler is equipped with an anti-corrosion coating that not only protects against environmental influences, but also enables optimum heat dissipation. The result: a long-lasting and optimum cooling effect. Our kit is completely ready to fit and 100% accurate. Replacing it with the standard intercooler is child's play. With a connection diameter of 67 mm on both sides, this intercooler is perfectly matched to your Audi 3.0TDI. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 178% more cooling surface- 158% more volume- less back pressure- Connection diameter 67 mm on both sides- Plug & Play Experience the future of performance enhancement with the Wagner Tuning Competition intercooler. Scope of delivery:1 intercooler2 charge air hoses4 hose clamps1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.

The Wagner Tuning Competition intercooler kit is suitable for the following vehicles:Audi A4 B8 1,8 TFSI 2008-2013 (MKB:CABA, CDHA, CABB, CABD, CDHB)*.Audi A4 B8 2.0 TFSI 2008-2013 (MKB: CDNB; CAEA; CDNC; CAEB; CFKA)*Audi A4 B8 Allroad 2.0 TFSI 2008-2013 (MKB: CDNB; CAEA; CDNC; CAEB; CFKA)*Audi A5 B8 1.8 TFSI 2008-2013 (MKB:CABA, CDHA, CABB, CABD, CDHB)*Audi A5 B8 2.0 TFSI 2008-2013 (MKB: CDNB; CAEA; CDNC; CAEB; CFKA)*Audi A5 B8 Sportback 1.8 TFSI 2008-2013 (MKB:CABA, CDHA, CABB, CDHB)*Audi A5 B8 Sportback 2.0 TFSI 2008-2013 (MKB: CDNB; CAEA; CDNC; CAEB; CFKA)** Not suitable for B8.5 facelift models* For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. Please refer to our installation instructions. Experience the ultimate increase in performance with our high-performance intercooler in a class of its own. This radiator sets new standards and will take your vehicle to a whole new level of performance. With impressive net dimensions of 610 mm x 440 mm x 65 mm (equivalent to 17,446 l), our high-performance intercooler offers a breathtaking 178 % larger intake area and an incredible 158 % more charge air volume compared to the standard intercooler. Experience a noticeable increase in performance and efficient cooling like never before. Our high performance competition mesh sets the benchmark in terms of quality and performance. It is a Tube Fin mesh with internal turbulators, specifically designed to optimize airflow and maximize cooling efficiency. Despite its impressive size, our intercooler weighs just 9.1 kg, making it a real lightweight. The cast aluminium end boxes were developed using the latest CAD technology and optimized through CFD simulations for optimal internal airflow. An integrated air duct in the end box ensures even filling of the Competition high performance mesh and maximizes cooling performance. The connection diameters were set to Ø67 mm, which is why this kit is supplied with reinforced silicone hoses. With our high-performance intercooler, you will not only experience improved cooling, but also significantly reduced backpressure compared to the standard intercooler. Our intercoolers are also equipped with a high-quality anti-corrosion coating, which has excellent heat conduction properties. This not only ensures long-lasting cooling, but also achieves an impressive increase in performance. The kit is completely ready to install and enables simple replacement with the standard intercooler. Our high-performance intercooler has undergone extensive testing and is pressure-stable up to 6 bar. We attach great importance to quality and continuously monitor the manufacture of our products. You can therefore rely on first-class quality. Our high-performance intercooler is not only suitable for racing, but for every driver who wants to get the most out of their vehicle. Experience the performance you have always wanted and increase the potential of your vehicle to unimagined heights. Advantages of the Wagner Tuning intercooler:- Improved cooling performance- 178 % larger inflow area- 158 % more charge air volume- Connection diameter Ø67 mm- Reduced back pressure- Simple replacement Scope of delivery:1 intercooler2 charge air hoses4 hose clamps1 fixing material1 assembly instructionsAttention: Not approved in the area of the StVZO.

The Wagner Tuning Competition water cooler kit is suitable for:Audi S4 B8 245KW/333PS 11/2008 - 06/2015 SedanAudi S4 B8 245KW/333PS 11/2008 - 06/2015 AvantAudi S5 8T 245KW/333PS 08/2011 - 07/2016 CoupeAudi S5 8T 245KW/333PS 03/2009 - 03/2017 CabrioletAudi S5 8T 245KW/333PS 11/2009 - 09/2016 Sportback Maximise the performance of your Audi S4/S5 with the Wagner Tuning additional water cooler kit. The 3.0L V6 supercharged engine of the Audi S4 and S5 models is a technical masterpiece. But even the best engines can benefit from optimisation. Our auxiliary water cooler kit is the solution for improved cooling performance and optimised efficiency. In contrast to conventional cooling with ambient air, our system utilises its own cooling water circuit. This enables a direct reduction in the cooling water temperature and leads to a noticeable improvement in the cooling performance of the charge air. Our new competition racing network increases the radiator volume of the standard water cooler by an impressive 92%. The intelligent ratio between the inner and outer cooling surface ensures maximum heat transfer. At the same time, sufficient airflow is ensured for heat exchange with neighbouring components. In addition, our water coolers are equipped with a thermally conductive anti-corrosion coating that ensures a long-lasting cooling effect. Installation of the system is straightforward and almost plug-and-play thanks to our detailed installation instructions. Increase the performance and reliability of your Audi S4/S5 with the Wagner Tuning additional water cooler kit. Scope of delivery:1x additional water cooler incl. silicone hoses and installation materialAttention: Not authorised in the area of the StVZO.

The Wagner Tuning silicone hose kit is suitable for the following vehicles:Audi A4 B8 1,8 TFSI 2008-2013 (MKB:CABA, CDHA, CABB, CABD, CDHB)*Audi A4 B8 2.0 TFSI 2008-2013 (MKB: CDNB; CAEA; CDNC; CAEB; CFKA)*Audi A4 B8 Allroad 2.0 TFSI 2008-2013 (MKB: CDNB; CAEA; CDNC; CAEB; CFKA)*Audi A5 B8 1.8 TFSI 2008-2013 (MKB:CABA, CDHA, CABB, CABD, CDHB)*Audi A5 B8 2.0 TFSI 2008-2013 (MKB: CDNB; CAEA; CDNC; CAEB; CFKA)*Audi A5 B8 Sportback 1.8 TFSI 2008-2013 (MKB:CABA, CDHA, CABB, CDHB)*Audi A5 B8 Sportback 2.0 TFSI 2008-2013 (MKB: CDNB; CAEA; CDNC; CAEB; CFKA)** Not suitable for B8.5 facelift modelsOptimize the performance and reliability of your Audi A4/A5 1.8 TFSI with the high-quality silicone hose kit from Wagner Tuning. Designed to improve intercooling and ensure a perfect fit, this kit offers a customized solution for your Audi. Compatibility:The silicone hose kit is exclusively compatible with our original intercooler and offers a hassle-free integration into Audi A4/A5 1.8 TFSI models. High quality material: The charge air hoses are made of high-quality silicone material that provides excellent heat and pressure resistance and is designed for long-lasting performance.Improved performance: By optimizing airflow, engine cooling performance is improved, resulting in increased power and responsive driving.Easy installation: Supplied with four hose clamps, the kit is simple and straightforward to install with no additional modifications required.Customized fit: The kit is specifically tailored to the Audi A4/A5 1.8 TFSI and offers a perfect fit as well as optimum performance. Attention: This hose kit is only compatible with the original Wagner Tuning intercooler. Scope of delivery:2 charge air hoses4 hose clamps Note: The article image is for illustrative purposes only. The actual shape of the product may differ slightly.