In order to transport the air precisely to the brake system, a suitable inlet is essential.
To ensure that the air let in through the inlet ducts of the front bumper is not randomly swirled around in the wheel arch, we have developed an inlet duct that can be fitted with little effort and directs the air precisely to the brakes - i.e. exactly where it is needed.
The covers can optionally be fitted on the outside in front of the ventilation grilles as protection against moisture or similar.
Our brake cooling system is plug & play and requires no modifications to the vehicle.
Scope of delivery:
- 4x intake scoop L+R, 2x anchor plate, mounting material, hose
Compatible vehicles:- 1er (E81)- 1er (E82) Coupé- 1er (E87)- 1er (E88) Cabrio
Attention: Without approval in the area of the StVZO.
MOVIT DDE steel brake system 342x34mm (4 piston calliper) for the front axle, from 18 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined.
The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications.
The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple layer of paint.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts
Attention: The conversion means that only rims with at least 18 inches can be fitted!
The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate.
MOVIT sports brake callipers, 4s3, 4-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force
MOVIT sports brake discs, 342x34mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Maximum fading resistance- Special alloy for high thermal conductivity
MOVIT brake pads, comfort BE-4s3- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life
Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x assembly material1x installation instructions and running-in instructions1x parts certificate
Compatible vehicles:Audi A4 / S4 B7 / 8EAudi S3 8VBMW 1 Series E81 / E82 / E87 / E88BMW 3 Series E36BMW 3 Series E46BMW 3 Series E90BMW M3 E46BMW M3 E46 CSL
Your vehicle is missing a data display! We have - the CANchecked display in generation 2 for E81, E82, E87 and E88.
Access to all engine data:The sensors are queried directly via Can Bus and are displayed on our tried-and-tested MFD28. The display for the E-series comes with a vehicle-specific cover and fits into the interior like an original part. This means that the ventilation through the slots remains intact.
Our display emulates a manufacturer tester so that all detailed values are available. We have optimised the protocol to achieve maximum polling speed.
Details:- integrates perfectly into the vehicle interior- Up to 128 sensors can be interrogated- 10 individually configurable views with our DSS - Display Setup Software- ready-made views for a quick start with our display- simply plug and play via our cable set - plug in, done- 4 additional analogue inputs for exhaust gas temperature, oil pressure and more- Best readability - optional anti-reflective film included- Query the sensors like manufacturer diagnostic tools
Performance metre:Measure your acceleration times in our performance widget - 0-100, 100-200, 0-200
Data jogging:Log all data to the internal SD card. Whether "on-demand" (start with a tap) or permanently. All data from your last turn is saved.
Preset alarms:Preset alerts can be easily activated and customised. For example, receive a large warning message if the exhaust gas temperature is above 900 degrees.
4 additional analogue inputs:Additional temperature and/or pressure sensors can be connected for further monitoring options. e.g. exhaust gas temperature or exhaust gas back pressure. An ethanol sensor can be connected to one of the digital inputs.
Read out/delete errors:Read out errors from the engine control unit in plain text and also delete them
Customised designWhether it's the customised start screen or the selection from a variety of different widgets. Make the display your display!
Switch pages with the cruise control button:To make driving safer, we have integrated the cruise control switch here with the company Lightweight-Performance.
When cruise control is not active, you can use the up/down button to switch between the views in the display. This has the following advantages:
- No "searching" for the display while concentrating on the road ahead
- Switching even when wearing gloves (on trackdays)
- Quick and safe checking of overview pages and then returning to the main viewDriver Dynamics:We have developed a special view for all track drivers who want to further improve their driving style and become a second or two faster:- G-forces (lateral and longitudinal acceleration)- Vehicle speed- Steering angle- Accelerator pedal position- Brake pressure
This sensor system gives the driver the opportunity to aim for even higher speeds in bends and to hit the braking point even later.
Together with the data log in the internal memory, which can be downloaded from the display after a track day, this offers a great opportunity to synchronise the data with a video.
Access to all data from the engine control unit:We supply your display with a ready-made TRI file as standard. All sensors that are queried are defined here.
Temperatures:
Engine water temperature, oil temperature, intake temperature, exhaust temperature, transmission temperature
Pressures:
Boost pressure, boost pressure target, fuel pressure high pressure pump, exhaust back pressure, low pressure, brake pressure, oil pressure
Lambda/mixture:
Lambda value target/actual, injection correction, short-term lambda adjustment, total ignition angle
Other data:
RPM, air mass (g/s), vehicle speed, throttle valve angle, battery voltage, gear, accelerator pedal position, longitudinal and lateral acceleration, steering angle, yaw angle, torque, power, boost pressure control valve activation
If values are missing, they can easily be added. It always depends on the engine whether it supports the values, sometimes not all sensors are available.Attention: Not all values are available for all engines!
For which engines and models is the display for E81 E82 E87 E88:The display bezel fits the following 1 Series E vehicles:- N54- N55- N43- other engines on request
The respective version for RHD (right-hand drive) is also available. The data may vary between the different engines.
Read out and delete errors:Swipe down to access the "DTC" (Diagnostic Trouble Codes = fault memory). The display reads the fault memory from the engine. Optionally, you can also delete these directly on the display.
Errors for the engine are displayed in plain text so that you can decide for yourself whether you can continue driving.MFD28 Technical data:- Dimensions: 70.3 x 52mm - Hardware: 2.8" TFT screen, touchscreen, MicroSD, MicroUSB- High-quality milled aluminium front frame- Symmetrical display - ideal for rotating it by 90°- Views completely freely configurable on the PC with our DSS - Display Setup Software- Up to 64 widgets per display- 64 sensors (Can Bus + internal)- 10 views- 4x analogue inputs- Optional external switching flash- Can bus switching- Can Bus protocols: UDS, KWP2000, OBD
Supported values:Many customers always ask: "Which values can I query from my control unit? The answer: "ALL". Our MFD28 is compatible with ISO 11898-2 and SAE J2284.The control unit manufacturers themselves determine which values are sent via the CAN bus interface. The documentation is important here - possibly even in the form of a DBC file that can be imported directly. You can also access our extensive list of already implemented control units. This can be found in the download area. A total of up to 50 sensors can be queried if the manufacturer supports this.Broadcast data as well as OBD2 queries via Can Bus (11bit/29bit) are implemented. Special protocols such as TP2.0 from VW/Audi and UDS are also available.
DSS - Display Setup Software:With our DSS - Display Setup Software, the display can be conveniently configured on the PC. The Can Bus protocol can be customised, you can import DBC files and design the displays with your own widgets.The log viewer downloads log files from the display. These can then be viewed and values can be individually selected and scaled.An in-built Can Bus logger allows you to take a close look at the log. This can be used to reverse-engineer unknown Can Buses.
The performance intercooler kit for N47D20(TÜ2) and M47 engines is suitable for the following vehicles:BMW 116d E81/E82/E87/E88 85KW/1116hp (2009-2013) LCI models onlyBMW 118d E81/E82/E87/E88 90-105KW/122-143hp (2003-2013) incl. LCI modelsBMW 120d E81/E82/E87/E88 120KW/163hp (2003-2007) M47BMW 316d E90/E91/E92/E93 85KW/116hp (2009-2012) LCI models onlyBMW 318d E90/E91/E92/E93 90-105KW/122-143hp (2005-2013) incl. LCI modelsBMW 320d E90/E91/E92/E93 110-120KW/150-163hp (2003-2007)BMW X1 16d E84 85KW/116hp (2012-2014)BMW X1 18d(x) E84 105KW/143hp (2010-2014)
Maximum performance and cooling - The performance intercooler
Are you dreaming of a noticeable increase in performance and more efficient cooling of your engine? Our performance intercooler is the answer to your dreams. With advanced technology and customized design, this intercooler offers a fascinating driving experience.
This performance intercooler outperforms the competition with mesh dimensions of 520 mm x 200 mm x 120 mm (stepped), resulting in an impressive total volume of 10,400 cm³. This represents an impressive 104% increase in flow area and 140% increase in charge air volume compared to the standard intercooler. Our high-performance network ensures outstanding cooling performance and enables your engine to make full use of the cooled air. This allows you to maximize performance. Despite its impressive performance, this intercooler is surprisingly light at just 7.6 kg. CAD-developed free-form cast aluminum end boxes optimize internal airflow, resulting in more cooling capacity with less back pressure compared to the stock cooler.
An anti-corrosion coating with excellent heat conduction properties protects our intercooler from environmental influences. This ensures long-lasting and optimum cooling performance so that you can rely on constant performance.
Installation is carried out at the original mounting points and is child's play. This kit is completely ready to install, a plug and play experience that saves time. We continuously monitor the quality of our products to ensure they meet the highest standards.
If you want to optimize the performance and efficiency of your vehicle, then the Performance Intercooler is the perfect choice. Experience how your vehicle awakens to new strength and your driving experience improves. Get your Performance Intercooler today and boost the performance to a whole new level.
Scope of delivery:1x intercooler (black coated)1x mounting material1x installation instructionsAttention: Not approved in the area of the StVZO.
The Performance intercooler kit is suitable for N47 engines in the following vehicles:BMW 120d (130KW/177hp) E81/E82/E87/E88 (2007-2013)BMW 123d (150KW/204hp) E81/E82/E87/E88 (2007-2013)BMW 320d (120-135KW/163-184hp) E90/E91/E92/E93 (2008-2012)BMW X1 20d(x) E84 130-135KW/177-184hp (2009-2015)BMW X1 23d(x) E84 150KW/204hp (2009-2012)
Unleash the power of your engine with our Performance intercooler kit.
Your vehicle deserves only the best, which is why we proudly present our Performance intercooler kit. With impressive mesh dimensions of 520mm x 200mm x 100mm (stepped to 8,110cc), our intercooler offers an astonishing 94% larger flow area and an impressive 37% more charge air volume compared to the original intercooler.
Our specially designed high performance mesh guarantees outstanding cooling properties to keep your engine running optimally in all conditions.
Thanks to our advanced materials and manufacturing techniques, our intercooler weighs only 7.6 kg despite its size. Experience powerful cooling without the extra weight.
The CAD designed freeform cast aluminum end boxes ensure the best possible internal airflow. Reduced back pressure means your engine can breathe more freely, resulting in improved performance.
Our kit was developed to seamlessly replace the OEM intercooler. Installation is simple and straightforward. You can even re-use your original charge air hoses to make installation even easier.
All our intercoolers are equipped with a high-quality anti-corrosion coating, which not only ensures optimum cooling, but also guarantees a long service life.
Prepare yourself for an unparalleled driving experience. Our Performance intercooler kit is the key to more power and efficiency for your vehicle. Order today and feel the difference.
Advantages of the Wagner Tuning intercooler:- Improved cooling performance- 94% larger inflow area- 37% more charge air volume- Reduced back pressure- uncomplicated installation
Scope of delivery:1x intercooler (black coated)1x mounting material1x installation instructionsAttention: Not approved in the area of the StVZO.