KW V1 coilover suspension Sportiness paired with outstanding looks. With factory pre-configured damping.Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car. Stepless loweringThe KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or, in the case of non-wheel-guiding double-wishbone rear axles, on the rear axle height adjustment. The benchmark for sporty, dynamic tuning fansWith its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to enhance your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasureAs a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, the warranty is up to five years. - Optimally adjusted in advance- sporty and harmonious damping technology- Stainless steel technology "inox-line"- Individually height-adjustable- Tested adjustment range- Ready-to-install complete solution- High-quality components for a long service life- Complete documentation for easy handling Setup - factory pre-configured damping setupThe KW V1 has a vehicle-specific, permanently configured damper setup. The spring and damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving. Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. It is interesting to note that the KW V1 is particularly popular with tuning enthusiasts who prioritise the idea of show & shine. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) - For vehicles with electronic damper control, this must be decommissioned. Electronic kit for decommissioning is included in the scope of delivery for item variant "YES".  - For camber correction on the rear axle, we recommend the use of the adjustable KW wishbone. Technical information: Product line: Street Performance Lowering VA/HA (mm): 20-45/20-45 Design: V1 Hardness adjustment: none Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper Hatchback Petrol 100 KW 1499 ccm 3 Front wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper D Hatchback Diesel 85 KW 1496 ccm 3 Front wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper S Hatchback Petrol 120 KW 1998 ccm 4 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper S Hatchback Petrol 131 KW 1998 ccm 4 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper S Hatchback Petrol 141 KW 1998 ccm 4 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper S JCW Hatchback Petrol 155 KW 1998 ccm 4 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper SD Hatchback Diesel 120 KW 1995 ccm 4 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper SD Hatchback Diesel 125 KW 1995 ccm 4 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- John Cooper Works Hatchback Petrol 170 KW 1998 ccm 4 front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- One Hatchback Petrol 75 KW 1198 ccm 3 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- One Hatchback Petrol 75 KW 1499 ccm 3 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- One D Hatchback Diesel 70 KW 1496 ccm 3 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- One First Hatchback Petrol 55 KW 1198 ccm 3 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- One First Hatchback Petrol 55 KW 1499 ccm 3 Front-wheel drive MINI MINI (F66, F65) 03/2024- Cooper C Hatchback Petrol 120 KW 1998 ccm 4 Front-wheel drive MINI MINI (F66, F65) 03/2024- Cooper C (F65) Hatchback Petrol 115 KW 1499 ccm 3 Front-wheel drive MINI MINI (F66, F65) 03/2024- Cooper S Hatchback Petrol 150 KW 1998 ccm 4 Front-wheel drive MINI MINI (F66, F65) 03/2024- John Cooper Works Hatchback Petrol 170 KW 1998 ccm 4 Front-wheel drive

KW V2 coilover suspension For more stability or driving comfort. With adjustable rebound damping.Sporty drivers who want more than just an outstanding look thanks to stepless lowering in the tested adjustment range will find the ideal suspension solution in the KW V2 coilover suspension in the typical KW "inox-line". In addition to the high-quality workmanship, the use of rust-free stainless steel struts, corrosion-resistant components and the convincing durability, the KW V2 convinces with the possibility of additionally adapting the damper setup to your own requirements with the rebound stage adjustable in 16 clicks. More comfort or more sport - you decideAs with all KW coilover suspensions, the KW engineers develop the vehicle-specific KW damper tuning, which is appreciated by car enthusiasts worldwide, in extensive test cycles on the Nürburgring Nordschleife and in our test centre on the KW 7-post driving dynamics test bench. With a KW coilover suspension you will experience your car more directly and dynamically. With the KW V2, as an experienced sports driver, you can influence the handling and comfort yourself with the individually adjustable rebound damping. The 16 precise clicks allow you to tune the KW dampers to be firmer or more comfortable without affecting the bottom valve of the compression stage. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery. By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car will track more accurately and you will have even more stability at higher cornering speeds. If, for example, you change the approved wheel/tyre combinations of your car manufacturer for larger rims, you can use the KW V2 with adjustable rebound to perfectly match the handling of your car and your new alloy wheels. KW quality - your satisfaction is our incentiveDuring production at our headquarters in Fichtenberg, the KW Variant 2 "inox-line" coilover suspension kits are subjected to extensive tests during the production process in order to fulfil our quality standards. Every single damper and every suspension is extensively tested. As a German manufacturer, it is a matter of course for us to provide a warranty of up to 5 years on our coilover suspension kits, which exceed the requirements of the original equipment industry, and on our suspension programme comprising over 4,600 applications when installed by one of our KW specialist dealers. Finally, KW coilover suspension struts are 100 per cent rust-free under all weather conditions and have an unlimited service life. The function of the stepless lowering via the dirt-resistant trapezoidal thread and the polyamide threaded ring on the KW V2 is also designed for many years of use. In a salt spray test, no oxidation occurred on the KW coilover struts. This means that the adjustment of the stepless lowering is not affected even after years of use. - Damping technology adjustable in the rebound stage in 16 exact clicks- Stainless steel technology inox-line- Individual, stepless lowering- Tested adjustment range- Ready-to-install complete solution- high-quality components for a long service life- Complete documentation for easy application Setup - Adjustable rebound damping with 16 clicks.With the KW V2, you can further adjust the vehicle-specific KW damper tuning, which is appreciated by car enthusiasts worldwide, with 16 clicks. The rebound adjustment allows you to take into account the changes in driving dynamics that result from changing the complete set of wheels or fitting winter tyres. The damper characteristic curve of the weather-resistant KW V2 coilover suspension can be adjusted to be firmer or more comfortable, depending on your own requirements. The suspension is suitable for all sporty drivers who want more than just stepless lowering for their driving pleasure. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) - For vehicles with electronic damper control, this must be decommissioned. Electronic kit for decommissioning is included in the scope of delivery for item variant "YES".  - Dampers have easy-to-operate adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible. - For camber correction on the rear axle, we recommend the use of the adjustable KW wishbone. Technical information: Product line: Street Performance Lowering VA/HA (mm): 20-45/20-45 Design: V2 Hardness adjustment: Rebound Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper Hatchback Petrol 100 KW 1499 ccm 3 Front wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper D Hatchback Diesel 85 KW 1496 ccm 3 Front wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper S Hatchback Petrol 120 KW 1998 ccm 4 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper S Hatchback Petrol 131 KW 1998 ccm 4 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper S Hatchback Petrol 141 KW 1998 ccm 4 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper S JCW Hatchback Petrol 155 KW 1998 ccm 4 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper SD Hatchback Diesel 120 KW 1995 ccm 4 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper SD Hatchback Diesel 125 KW 1995 ccm 4 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- John Cooper Works Hatchback Petrol 170 KW 1998 ccm 4 front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- One Hatchback Petrol 75 KW 1198 ccm 3 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- One Hatchback Petrol 75 KW 1499 ccm 3 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- One D Hatchback Diesel 70 KW 1496 ccm 3 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- One First Hatchback Petrol 55 KW 1198 ccm 3 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- One First Hatchback Petrol 55 KW 1499 ccm 3 Front-wheel drive MINI MINI (F66, F65) 03/2024- Cooper C Hatchback Petrol 120 KW 1998 ccm 4 Front-wheel drive MINI MINI (F66, F65) 03/2024- Cooper C (F65) Hatchback Petrol 115 KW 1499 ccm 3 Front-wheel drive MINI MINI (F66, F65) 03/2024- Cooper S Hatchback Petrol 150 KW 1998 ccm 4 Front-wheel drive MINI MINI (F66, F65) 03/2024- John Cooper Works Hatchback Petrol 170 KW 1998 ccm 4 Front-wheel drive

KW V3 Clubsport coilover suspension incl. support bearing With an uncompromising technology transfer from racing to the road, the KW Clubsport coilovers convince.The KW Clubsport coilovers convince with their uncompromising combination of high-end racing technology with maintenance-free KW original equipment components and expertises.This gives you the ideal accessories to realise the full potential of your sports car at trackdays, sports driver training courses, tourist drives on Grand Prix circuits and on the Nürburgring Nordschleife. Developed for the toughest racetrack in the world: the Nürburgring NordschleifeEven in their basic set-up, KW Clubsport coilovers are tuned to the different track surfaces, steep bends, jumps and chicanes of the 20.8 kilometre long Nürburgring Nordschleife. After all, as one of the most successful suspension manufacturers and suppliers in motorsport, we are at home on the Nordschleife.In the VLN Endurance Championship alone, we equip over 70 racing teams and, as a suspension manufacturer, have supported six overall victories at the ADAC Zurich 24h Race Nürburgring in ten years. The winner of the ADAC GT Masters 2011 also relies on our racing expertise, from which the KW Clubsport coilovers benefit.The basic setup of the KW V3 Clubsport and KW V4 Clubsport with separate expansion tank, which is perfectly adapted to the Nordschleife, allows you to adjust your sports car even more individually to the desired sports tyre setup thanks to the numerous adjustment options.In addition to optionally available adjustable support bearings, the KW Clubsport coilovers allow you to adjust the damper forces independently in the rebound and compression stages with the integrated KW V3 Clubsport coilover suspension technology like in racingWith the adjustment wheels for the rebound adjustment, you can fine-tune the recommended basic setup for your sports car and your individually installed performance components with 16 exact clicks. This allows you to directly influence changed wheel loads, for example to influence bodywork movements. Separate from the rebound adjustment, the KW V3 Clubsport allows you to adjust the compression damping with twelve exact clicks in the low-speed range to your requirements, such as the sports tyres used.These setting options allow you to consider individual setups to suit the vehicle weight, sports tyre characteristics, track characteristics and operating conditions. - Freely adjustable damping technology in rebound and compression damping- Stainless steel technology "inox-line"- Stepless lowering- Tested adjustment range- high-quality components for a long service life- Adjustable rebound damping with 16 exact clicks- Adjustable compression damping with 12 exact clicks- unique, independently acting damping force adjustment- optionally available with aluminium Unibal support bearing. Setup: Application range and damper tuningThe KW V3 Clubsport coilover suspensions impress with their vehicle-specific setup for trackday events on the Nürburgring Nordschleife, as well as the possibility of quickly tuning these suspensions for other racetracks and individual performance sports cars. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) - For vehicles with electronic damper control, this must be decommissioned. Electronic kit for decommissioning is included in the scope of delivery for item variant "YES".  - Dampers have easy-to-operate adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible. - For camber correction on the rear axle, we recommend the use of the adjustable KW wishbone. - Clubsport suspension with support bearing: only available with VA support bearing Technical information: Product line: Track Performance Lowering VA/HA (mm): 35-50/20-45 Version: V3 Clubsport Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper Hatchback Petrol 100 KW 1499 ccm 3 Front wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper D Hatchback Diesel 85 KW 1496 ccm 3 Front wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper S Hatchback Petrol 120 KW 1998 ccm 4 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper S Hatchback Petrol 131 KW 1998 ccm 4 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper S Hatchback Petrol 141 KW 1998 ccm 4 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper S JCW Hatchback Petrol 155 KW 1998 ccm 4 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper SD Hatchback Diesel 120 KW 1995 ccm 4 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper SD Hatchback Diesel 125 KW 1995 ccm 4 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- John Cooper Works Hatchback Petrol 170 KW 1998 ccm 4 front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- One Hatchback Petrol 75 KW 1198 ccm 3 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- One Hatchback Petrol 75 KW 1499 ccm 3 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- One D Hatchback Diesel 70 KW 1496 ccm 3 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- One First Hatchback Petrol 55 KW 1198 ccm 3 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- One First Hatchback Petrol 55 KW 1499 ccm 3 Front-wheel drive MINI MINI (F66, F65) 03/2024- Cooper C Hatchback Petrol 120 KW 1998 ccm 4 Front-wheel drive MINI MINI (F66, F65) 03/2024- Cooper C (F65) Hatchback Petrol 115 KW 1499 ccm 3 Front-wheel drive MINI MINI (F66, F65) 03/2024- Cooper S Hatchback Petrol 150 KW 1998 ccm 4 Front-wheel drive MINI MINI (F66, F65) 03/2024- John Cooper Works Hatchback Petrol 170 KW 1998 ccm 4 Front-wheel drive

KW V3 coilover suspension Unlimited individuality for performance & comfort. Damper force adjustment separately for rebound & compression damping.As with every KW coilover suspension, our suspension engineers also develop a sporty and harmonious basic set-up for the vehicle-specific applications of the KW V3. In addition to tests on our KW 7-post driving dynamics test bench, we also carry out extensive test drives on country roads, the motorway and even on the Nürburgring Nordschleife, kilometre by kilometre, to guarantee you the perfect suspension set-up. For years, the KW V3, one of the world's top aftermarket products, has been the reference for coilover suspensions. With its damper characteristics, high-quality workmanship and excellent durability, it has impressed discerning sports car drivers, tuners, large and small series manufacturers such as Alpina, MTM, Manthey, Oettinger and many other well-known companies in the international automotive industry. Cutting-edge technology from motorsportYou get much more than a sporty lowering and excellent handling on all roads with the KW V3. It is based on our many years of experience as a suspension manufacturer and supplier in international motorsport, such as in the ADAC GT Masters touring car series, FIA GT1, FIA GT3, International GT Open, WTC, VLN and also in the legendary ADAC Zurich 24h Race Nürburgring.Similar to our racing coilovers from the KW Competition programme, the rebound and compression damping of the KW V3 can be adjusted independently of each other. This individual tuning option is appreciated by tuners, sports car manufacturers, tuners and demanding drivers worldwide. The perfect suspension setup for significantly more driving dynamicsIf you have already carried out initial performance modifications to your sporty road vehicle, it is easy to incorporate these into the damper set-up in a targeted manner with the KW V3. The patented KW valve technology for the separate adjustment of the rebound and compression damping allows you to customise the vehicle-specific basic set-up from KW. For example, the KW bottom valve, which can be adjusted in twelve clicks in the low-speed range of the compression damping, gives you the scope to even take the tyre characteristics of your high and ultra-high performance road tyres into account in the suspension set-up.Thanks to the patented compression adjustment at the lower piston end of the stainless steel housing, you don't even need any tools. The adjustable compression adjustment with its twelve precise clicks allows you to influence body roll and body roll movements by hand without having to change the rebound damping to match the spring rate.With the individually adjustable rebound damping of the KW V3, you can directly influence the handling and comfort through the exact click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery.By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car tracks more accurately and you have even more stability at higher cornering speeds. If, for example, you change from the approved wheel/tyre combinations of your car manufacturer to larger rims, you can use the KW V3 to perfectly match the handling of your car and your new alloy wheels. High-quality, customised and durableThe KW V3 is subjected to extensive quality tests during production and every single damper is checked. This is the only way we can fulfil our claim to provide a warranty of up to five years when a KW coilover suspension V3 is installed by a KW specialist dealer. Due to the filigree workmanship and the use of high-quality components, the KW coilover struts made of stainless steel, for example, are 100 per cent rust-free and have an unlimited service life.This means that the functionality of the stepless lowering system via the dirt-resistant KW trapezoidal thread and the KW polyamide threaded ring is not impaired even after many years. Thanks to the individual lowering with its stepless adjustment range, you can also emphasise the sportiness of your vehicle visually. A feature that is very popular in the performance-orientated tuning scene. - Freely adjustable damping technology in rebound and compression damping- inox-line stainless steel technology- Individual, stepless lowering- Tested adjustment range- high-quality components for a long service life- adjustable rebound damping with 16 exact clicks- 12-way adjustable compression damping with click adjustment- Unique, independently acting damping force adjustment Setup: The individually adjustable rebound & compression damping of the KW V3The KW V3 is the ideal accessory for performance-orientated drivers and tuning enthusiasts who demand a high level of sportiness from their vehicles. The dampers, which are separately adjustable in rebound and compression, allow extensive damper tuning with their sophisticated click adjustment. This makes it easy to directly influence the turn-in behaviour, directional stability, tyre grip and handling characteristics for safe controllability at the limit. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) - For vehicles with electronic damper control, this must be decommissioned. Electronic kit for decommissioning is included in the scope of delivery for item variant "YES".  - Dampers have easy-to-operate adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible. - For camber correction on the rear axle, we recommend the use of the adjustable KW wishbone. Technical information: Product line: Street Performance Lowering VA/HA (mm): 20-45/20-45 Design: V3 Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper Hatchback Petrol 100 KW 1499 ccm 3 Front wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper D Hatchback Diesel 85 KW 1496 ccm 3 Front wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper S Hatchback Petrol 120 KW 1998 ccm 4 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper S Hatchback Petrol 131 KW 1998 ccm 4 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper S Hatchback Petrol 141 KW 1998 ccm 4 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper S JCW Hatchback Petrol 155 KW 1998 ccm 4 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper SD Hatchback Diesel 120 KW 1995 ccm 4 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper SD Hatchback Diesel 125 KW 1995 ccm 4 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- John Cooper Works Hatchback Petrol 170 KW 1998 ccm 4 front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- One Hatchback Petrol 75 KW 1198 ccm 3 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- One Hatchback Petrol 75 KW 1499 ccm 3 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- One D Hatchback Diesel 70 KW 1496 ccm 3 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- One First Hatchback Petrol 55 KW 1198 ccm 3 Front-wheel drive MINI MINI (F56) FML2, UKL-L 12/2013- One First Hatchback Petrol 55 KW 1499 ccm 3 Front-wheel drive MINI MINI (F66, F65) 03/2024- Cooper C (F65) Hatchback Petrol 115 KW 1499 ccm 3 Front-wheel drive MINI MINI (F66, F65) 03/2024- Cooper S Hatchback Petrol 150 KW 1998 ccm 4 Front-wheel drive MINI MINI (F66, F65) 03/2024- John Cooper Works Hatchback Petrol 170 KW 1998 ccm 4 Front-wheel drive