Front grille CS Carbon | fits BMW M2 (G87) S58 | Aulitzky Tuning

Our high quality SOOQOO front bumper insert made from pre-preg carbon fibre is a great addition to significantly increase the style and aggressiveness of your vehicle. Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x SOOQOO front bumper insert made from glossy prepreg carbon fibre Compatible vehicles:BMW G87 2 Series M2 (2023+) Note: This is NOT an original BMW product!

Your vehicle is missing a data display! We have - the CANchecked display for E36 models. Access to all engine data:The sensors are queried directly via Can Bus and are displayed on our tried-and-tested MFD28. The display for the E-series comes with a vehicle-specific cover and fits into the interior like an original part. This means that the ventilation through the slots remains intact. Our display emulates a manufacturer tester so that all detailed values are available. We have optimized the protocol to achieve maximum polling speed. Details:- integrates perfectly into the vehicle interior- Up to 128 sensors can be queried- 10 individually configurable views with our DSS - Display Setup Software- ready-made views for a quick start with our display- simply plug and play via our cable set - plug in, done- 4 additional analog inputs for exhaust gas temperature, oil pressure and more- Best readability - optional anti-reflective film included- Query the sensors like manufacturer diagnostic tools Performance meter:Measure your acceleration times in our performance widget - 0-100, 100-200, 0-200 Data jogging:Log all data to the internal SD card. Whether “on-demand” (start with a tap) or permanent. All data from your last turn is saved. Preset Alarms:Preset alerts can be easily activated and also customized. For example, receive a large warning message if the exhaust gas temperature is above 900 degrees. 4 additional analog inputs:Additional temperature and/or pressure sensors can be connected for further monitoring options. e.g. exhaust gas temperature or exhaust gas back pressure. An ethanol sensor can be connected to one of the digital inputs. Read out/delete errors:Read out errors from the engine control unit in plain text and also delete them Individual designWhether it's the individual start screen or the selection from a variety of different widgets. Make the display your display! Driver Dynamics:We have developed a special view for all track drivers who want to further improve their driving style and become a second or two faster:- G-forces (lateral and longitudinal acceleration)- Vehicle speed- Steering angle- accelerator pedal position- Brake pressure This sensor system gives the driver the opportunity to aim for even higher speeds in bends and to hit the braking point even later. Together with the data log in the internal memory, which can be downloaded from the display after a track day, this offers a great opportunity to synchronize the data with a video. Access to all data from the engine control unit:We supply your display with a ready-made TRI file as standard. All sensors that are queried are defined here. Temperatures:Engine water temperature, oil temperature, intake temperature, exhaust temperature, transmission temperature Pressures:Boost pressure, boost pressure target, fuel pressure high pressure pump, exhaust back pressure, low pressure, brake pressure, oil pressure Lambda/mixture:Lambda value target/actual, injection correction, short-term lambda adjustment, total ignition angle Other data:RPM, air mass (g/s), vehicle speed, throttle valve angle, battery voltage, gear, accelerator pedal position, longitudinal and lateral acceleration, steering angle, yaw angle, torque, power, boost pressure control valve activation If values are missing, they can easily be added. It always depends on the engine whether it supports the values, sometimes not all sensors are available. Attention: Not all values are available for all engines! For which engines and models is the display for E36:The display bezel fits the following 3 Series E models:- M50, M52- S50- Other engines on request Read out and delete errors:Swipe down to access the “DTC” (Diagnostic Trouble Codes = fault memory). The display reads the fault memory from the engine. Optionally, you can also delete these directly on the display. Errors for the engine are displayed in plain text so that you can decide for yourself whether you can continue driving. MFD28 Technical data:- Dimensions: 70.3 x 52mm - Hardware: 2.8” TFT screen, touchscreen, MicroSD, MicroUSB- High-quality milled aluminum front frame- Symmetrical display - ideal for rotating it by 90- Views completely freely configurable on the PC with our DSS - Display Setup Software- Up to 64 widgets per display- 64 sensors (Can Bus + internal)- 10 views- 4x analog inputs- Optional external switching flash- Can bus switching- Can Bus protocols: UDS, KWP2000, OBD Supported values:Many customers always ask: “Which values can I query from my control unit”. The answer: “ALL”. Our MFD28 is compatible with ISO 11898-2 and SAE J2284.The control unit manufacturers themselves determine which values are sent via the CAN bus interface. The documentation is important here - possibly even in the form of a DBC file that can be imported directly. You can also access our extensive list of already implemented control units. This can be found in the download area. A total of up to 50 sensors can be queried if the manufacturer supports this.Broadcast data as well as OBD2 queries via Can Bus (11bit/29bit) are implemented. Special protocols such as TP2.0 from VW/Audi and UDS are also available. DSS - Display Setup Software:With our DSS - Display Setup Software, the display can be conveniently configured on the PC. The Can Bus protocol can be customized, you can import DBC files and design the displays with your own widgets.The log viewer downloads log files from the display. These can then be viewed and values can be individually selected and scaled.A built-in Can Bus logger makes it possible to take a close look at the log. This can be used to reverse-engineer unknown Can Buses.

Your vehicle is missing a data display! We have - the CANchecked display for E46 models. Access to all engine data:The sensors are queried directly via Can Bus and are displayed on our tried-and-tested MFD28. The display for the E-series comes with a vehicle-specific cover and fits into the interior like an original part. This means that the ventilation through the slots remains intact. Our display emulates a manufacturer tester so that all detailed values are available. We have optimized the protocol to achieve maximum polling speed. Details:- integrates perfectly into the vehicle interior- Up to 128 sensors can be queried- 10 individually configurable views with our DSS - Display Setup Software- ready-made views for a quick start with our display- simply plug and play via our cable set - plug in, done- 4 additional analog inputs for exhaust gas temperature, oil pressure and more- Best readability - optional anti-reflective film included- Query the sensors like manufacturer diagnostic tools Performance meter:Measure your acceleration times in our performance widget - 0-100, 100-200, 0-200 Data jogging:Log all data to the internal SD card. Whether "on-demand" (start with a tap) or permanent. All data from your last turn is saved. Preset alarms:Preset alarms can be easily activated and customized. For example, receive a large warning message if the exhaust gas temperature is above 900 degrees. 4 additional analog inputs:Additional temperature and/or pressure sensors can be connected for further monitoring options, e.g. exhaust gas temperature or exhaust gas back pressure. An ethanol sensor can be connected to one of the digital inputs. Read out/delete errors:Read out errors from the engine control unit in plain text and also delete them Individual designWhether it's the individual start screen or the selection from a variety of different widgets. Make the display your display! Driver Dynamics:We have developed a special view for all track drivers who want to further improve their driving style and become a second or two faster:- G-forces (lateral and longitudinal acceleration)- Vehicle speed- Steering angle- accelerator pedal position- Brake pressure This sensor system gives the driver the opportunity to aim for even higher speeds in bends and to hit the braking point even later. Together with the data log in the internal memory, which can be downloaded from the display after a track day, this offers a great opportunity to synchronize the data with a video. Access to all data from the engine control unit:We supply your display with a ready-made TRI file as standard. All sensors that are queried are defined here. Temperatures:Engine water temperature, oil temperature, intake temperature, exhaust temperature, transmission temperature Pressures:Boost pressure, boost pressure target, fuel pressure high pressure pump, exhaust back pressure, low pressure, brake pressure, oil pressure Lambda/mixture:Lambda value target/actual, injection correction, short-term lambda adjustment, total ignition angle Other:RPM, air mass (g/s), vehicle speed, throttle valve angle, battery voltage, gear, accelerator pedal position, longitudinal and lateral acceleration, steering angle, yaw angle, torque, power, boost pressure control valve activation If values are missing, they can easily be added. It always depends on the engine whether it supports the values, sometimes not all sensors are available. Attention: Not all values are available for all engines! For which engines and models is the display for E46:The display panel fits the following 3 Series E models:- M52, M54- S54- Other engines on request Read out and delete errors:Swipe down to access the "DTC" (Diagnostic Trouble Codes = fault memory). The display reads the fault memory from the engine. Optionally, you can also delete these directly on the display. Errors for the engine are displayed in plain text so that you can decide for yourself whether you can continue driving. MFD28 Technical data:- Dimensions: 70.3 x 52mm - Hardware: 2.8" TFT screen, touchscreen, MicroSD, MicroUSB- High-quality milled aluminum front frame- Symmetrical display - ideal for rotating it by 90- Views completely freely configurable on the PC with our DSS - Display Setup Software- Up to 64 widgets per display- 64 sensors (Can Bus + internal)- 10 views- 4x analog inputs- Optional external switching flash- Can bus switching- Can Bus protocols: UDS, KWP2000, OBD Supported values:Many customers always ask: "Which values can I query from my control unit". The answer: "ALL". Our MFD28 is compatible with ISO 11898-2 and SAE J2284.The control unit manufacturers themselves determine which values are sent via the CAN bus interface. The documentation is important here - possibly even in the form of a DBC file that can be imported directly. You can also access our extensive list of already implemented control units. This can be found in the download area. A total of up to 50 sensors can be queried if the manufacturer supports this.Broadcast data as well as OBD2 queries via Can Bus (11bit/29bit) are implemented. Special protocols such as TP2.0 from VW/Audi and UDS are also available. DSS - Display Setup Software:With our DSS - Display Setup Software, the display can be conveniently configured on the PC. The Can Bus protocol can be customized, you can import DBC files and design the displays with your own widgets.The log viewer downloads log files from the display. These can then be viewed and values can be individually selected and scaled.A built-in Can Bus logger allows you to take a close look at the log. This can be used to reverse-engineer unknown Can Buses.

The Wagner Tuning Competition Intercooler Kit EVO 2 is suitable for:Audi TTRS 8J 250KW/340hp (2009-2014)Audi TTRS plus 8J 265KW/360hp (2009-2014) The Wagner Tuning intercooler upgrade kit EVO 2 for Audi TTRS 8J Discover the ultimate performance with our Wagner Tuning Evo 2 Competition intercooler for the Audi TTRS 8J! Would you like to raise your vehicle to a new level of performance? Our Evo 2 Competition intercooler is the answer for anyone looking for maximum performance and quality. With impressive mesh dimensions of 535 mm x 260 mm x 95 mm, this cooler not only offers an astonishing 62.5% larger flow area, but also a massive 94% increase in charge air volume compared to the original intercooler. The secret of our Evo 2 intercooler lies in the innovative Competition high performance mesh. Developed to not only provide superior cooling, but also to ensure sufficient airflow to the adjacent components. Thanks to high-quality cast aluminum, the end boxes are lightweight yet extremely robust. Each radiator has been carefully optimized in the CAD system to ensure the perfect airflow. This intercooler is not just an upgrade, but a statement. It is tailor-made for racing and offers not only outstanding cooling properties, but also a stable unit with the original cross member of your vehicle. Despite its powerful features, it weighs less than 10 kg, making it lighter than many other radiators on the market. Installation is child's play. Thanks to the 1:1 replacement, you can install it at the original mounting points. Feel the improved performance and optimized cooling of the supercharged air as you dominate the roads. Ready for the ultimate riding experience? Order your Evo 2 Competition intercooler for the Audi TTRS 8J now and unleash the true power of your vehicle. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 62.5% larger inflow area- 94% more charge air volume- flow-optimized- Plug & Play Scope of delivery:1 intercooler together with the crossbar1 set of license plate holdersAttention: Not approved in the area of the StVZO.

Wagner Tuning Competition Intercooler Kit fits for:Subaru WRX STI GD C-E 2,0 Turbo 195KW/265hp (2002-2005) RHD**Please note that this intercooler is only suitable for RHD vehicles (right-hand drive). Boost the performance of your Subaru WRX STI to a new level with our impressive Competition high performance intercooler. With net dimensions of 530 mm x 205 mm x 95 mm and a generous charge air volume of 10.3 liters, this intercooler offers a 23.6% larger flow area and provides an impressive 95.5% more charge air volume compared to the standard intercooler. Specially developed for the requirements of the Subaru WRX STI, our new competition high-performance mesh (Tube Fin) sets new standards. The cast aluminium end boxes have been optimized using CAD technology and CFD simulations to ensure the best possible internal airflow. The intercooler inlets and outlets remain unchanged, while the back pressure is minimally reduced. With our anti-corrosion coating, which has excellent heat conduction properties, your intercooler is optimally protected against environmental influences. This guarantees long-lasting and optimum cooling, accompanied by a significant increase in performance. Installation is done in no time at all by replacing the OEM intercooler. Thanks to our plug-and-play function, installation is child's play. You don't need any technical expertise. Our intercooler kit for the Subaru WRX STI has been manufactured with the utmost care and is subject to constant quality control to guarantee you the best possible quality. Technical details:- Net dimensions: 530 mm x 205 mm x 95 mm (10.3 liters)- 23.6% larger inflow area, 95.5% more charge air volume- Optimized competition high-performance mesh (Tube Fin)- Reduced back pressure compared to the standard intercooler- Anti-corrosion coating with heat conduction properties- Simple installation (plug and play) Our Competition Intercooler Kit for the Subaru WRX STI gives you the opportunity to unlock the full potential of your vehicle. Order today and experience a driving experience that will thrill you! Dimensions original intercooler:475mm x 185mm x 60mmV=5.27 litersA=878.75 cm² Wagner Tuning intercooler dimensions:530mm x 205mm x 95mmV=10.3 litersA=1086 cm² Scope of delivery:1 intercooler (black coated)1 air duct2 Silicone hose (black)1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.