Suitable for the following vehicles:VW Golf 8 GTI Clubsport 2,0TSI 221KW/300PS year 2020-VW Golf 8 R 2,0TSI 235KW/320PS year 2020- Ready for the next level?Boost the performance and style of your VW Golf 8 GTI Clubsport or R with the WagnerTuning Carbon Air Intake System. Order now and get ready for an unforgettable driving experience. Experience a revolution in the engine bay of your VW Golf 8 GTI Clubsport or R with our innovative carbon fibre air intake system from Wagner Tuning. Designed to eliminate the weak points of the stock system while delivering premium performance, this system is a must-have for any performance enthusiast. Our carbon air intake system has been developed with elaborate 3D flow simulations to ensure optimal flow characteristics and maximise performance. The result? An impressive intake sound that turns your ride into an experience. The kit includes a specially developed sports air filter that offers maximum filtration efficiency with minimum back pressure. With a connection diameter of Ø76mm to the turbocharger and an adaptive silicone hose, the system adapts seamlessly to the original connection diameter. This increases the air mass flow rate by an impressive +50%, resulting in improved engine response and a direct increase in performance. In addition to its impressive performance, our air intake system also improves the appearance of the engine compartment. The high-quality workmanship and attractive design give your vehicle a touch of exclusivity and sportiness. Scope of delivery:1 carbon airbox1 Ø76mm aluminium adapter1 sports air filter1 mounting material1 installation instruction With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

Facts: - replaces the main catalytic converter - with 200-cell stainless steel sports catalytic converter and OPF - Euro 6 compatible - with ECE approval* Compatible vehicles: ManufacturerModelTypeEngine capacity (litres)Power (kW)Engine typeEmission standardCupraFormentorKM2.0180DNPAEuro 6d - OPFSkodaOctavia III RSNX2.0180DNPAEuro 6d - OPFVW GOLFGolf 8 GTICD2.0180DNPAEuro 6d - OPFVW GOLFGolf 8 GTI ClubsportCD2.0221DNFCEuro 6d - OPF Note: Depending on the software version, the engine control light may light up. We recommend a software adjustment in this case. *This downpipe has ECE approval so that it can be used within the scope of the German Road Traffic Licensing Regulations (StVZO) without registration in the vehicle documents.

This article is only a pre-order! The reduced price is only valid for the time of the pre-order, after that the regular price applies. Facts: - Tailpipes: 2x101mm black matt - Stainless steel 3 inch - 2 electric flaps: unique on the market, when the flap is closed, steam continues to come out of both tailpipes - Specially tuned for use/registration in combination with performance upgrade, DP, intake and intercooler (legal noise increase possible) - Exhaust flaps with ceramic bearings - Made in Germany (developed, tested and built at Lake Constance) - with ECE approval* Attention: The delivery date of the exhaust system is in January/February 2026! Scope of delivery: - 1x Aulitzky exhaust system from catalytic converter - 1x Aulitzky Exhaust flap control unit - 2 x tailpipes 101mm - ECE handoutCompatible vehicles: VehicleVehicle typePower outputcubic capacityEngineYear of construction VW Golf 8GTI180kW / 245PS1984cm³DNP (Euro 6d)08.20 - 02.24 VW Golf 8Clubsport/ED45221kW / 300PS1984cm³DNF (Euro 6d)10.20 - 02.24 *The combination certificate is available (includes intake, intercooler, boost / charge pipe kit, downpipe, exhaust system, performance increase of up to 345PS for GTI and 455PS for CS models and 102dB increase in stationary noise).In conjunction with the ECE flap control (with type approval), this flap exhaust system has ECE approval so that it can be used legally within the scope of the StVZO without registration in the vehicle documents.

Suitable for the following vehicles:VW Golf VIII 2.0TSI GTI Clubsport (from 10/2020)VW Golf VIII 2.0TSI R (from 12/2020)VW Arteon (type 3H) 2.0TSI R (from 12/2020) Experience optimised performance and improved responsiveness with our high-quality Charge and Boost Pipe Kit Ø70mm, specially developed for the VAG 2.0TSI EA888 Gen.4 engine in vehicles such as the VW Golf VIII 2.0TSI GTI Clubsport, VW Golf VIII 2.0TSI R and the VW Arteon (Type 3H) 2.0TSI R. Developed with the highest precision and performance, this kit offers an ideal solution for enthusiasts who want to take their vehicles to the next level of performance. Optimised performance: The larger Ø70mm diameter allows for improved airflow, resulting in increased performance and improved responsiveness. High quality materials: Made from high quality aluminium and robust silicone for maximum durability and performance. Plug-and-play installation: The kit comes with all required mounting hardware and can be easily installed without any complex adjustments. Scope of delivery:4 silicone hoses2 aluminium charge air pipes8 hose clamps Attention:This Charge and Boost Pipe Kit is only compatible with the original Wagner Tuning intercooler.With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

The BlackBoost Cold Air Intake for the VW Mk8 GTI/CS/R is here to increase airflow, improve throttle response and maximise performance gains. Innovative design and superior durabilityThese air intakes are laser-cut with the highest precision from high-strength aluminium and finished with a stylish black powder coating for superior durability. The robust construction is specially designed for extreme conditions and guarantees top performance on every ride. Removable filter cover for optimised airflowThis advanced intake system features a removable filter cover that allows you to adjust the airflow to suit the riding conditions. Simply open the cover for maximum airflow or close it for extra protection. This puts you in control of performance and durability. Extra-large intake duct for maximum airflowThe intake's extra-large inlet duct is strategically designed to increase airflow, optimising engine efficiency and performance in all riding conditions. 13.97 cm (5.5 inch) dual high-flow synthetic dry air filterThis system features newly developed 13.97 cm (5.5 inch) high-flow filters and maximises surface area for excellent airflow and filtration. These premium filters with synthetic filter element deliver cleaner air to the engine, improving power and performance. Moulded silicone hose with 1/8 NPT pre-turbo methanol connectorDesigned for efficiency and durability, this high performance coupler features 1/8″ NPT fittings, making it compatible with pre-turbo methanol injection upgrades to lower intake temperatures. Its oversized design improves engine performance across the board. Secondary air filter for US specificationsOn US models, the system includes a secondary twin-flow dry air filter. Replacement coolant lineThe BlackBoost Cold Air Intake features a specially designed coolant line that blends seamlessly with the aesthetics of the intake box. This direct OEM replacement offers a straightforward upgrade that combines durability with a sleek and uniform look for your engine bay. Included:- Powder coated airbox with oversized duct- Filter cover- Moulded silicone hose with 1/8 NPT pre-turbo methanol connector.- 13.97 cm (5.5 inch) Twin Flow dry filter- SAI filter with bracket (US specification)- Coolant line with clamps Key features:- Completely new design with customised engine cover- Double 13.97 cm (5.5 inch) high-flow dry air filter made of synthetic material- Open/close filter cover for customisable performance- Integrated methanol connections for easy performance upgrades- Secondary air filter for US specifications- Replacement coolant- Proven power increase from 8 to 30+ hp on stock vehicles- Improved throttle response across the entire rev range- Supports airflow for systems with more than 1000 WHP- Direct plug-and-play installation with no ECU tuning required- Check engine light (CEL) is not triggered Compatible vehicles: VW Golf 8 GTI 2.0 TSI 180kW/245PS 1984cm³ 2020- VW Golf 8 GTI Clubsport/ED45 2.0 TSI 221kW/300PS 1984cm³ 2020- VW Golf 8 R 2.0 TSI 235kW/320PS 1984cm³ 4motion 2020- VW Golf 8 R Performance 2.0 TSI | 245kW | 333PS | 1984cm³ | 4motion 2022-2024 VW Golf 8 R 20Years 2.0 TSI 245kW/333PS 1984cm³ 4motion 2024- (fits, but without registration!)

Suitable for the following vehicles:Audi S3 8Y 2.0TFSI 228KW/310hp (from 10/2020 MKB: DNFB)Audi TT 8S 45TSI 180kW / 245hp (from 10/2020 MKB: DNPA)Audi TTS 8S 235KW/320hp (from 11/2020 MKB: DNFD)VW Golf VIII type CD2.0 GTI 180kW / 245hp (from 08/2020 MKB: DNPA)VW Golf VIII type CD2.0 GTI Clubsport 220KW/300hp (from 10/2020 MKB: DNFC)VW Golf VIII Type CD2.0 R 235KW/320hp (from 12/2020 MKB: DNFG)VW Passat B8 2.0TSI 206KW/280hp (from 11/2020 MKB:DNFE)VW Arteon (type 3H) 2.0TSI R 206-235KW / 280-320hp (from 12/2020 MKB: DNFE, DNFG)VW T-Roc R 221kW/300hp (from 10/2020 MKB: DNFC)Cupra Leon IV KL Cupra TSI 4Drive 228KW/310hp (from 02/2021 MKB: DNFB)Cupra Formentor VZ 2.0TSI 180kW / 245hp (from 03/2021 MKB: DNPA)Cupra Formentor VZ 2.0TSI 228kW / 310hp (from 11/2020 MKB: DNFB)Skoda Octavia NX 2.0 TSI RS 180kW / 245hp (from 09/2020 MKB: DNPA)Skoda Superb 3V 2.0TSI 206KW/280hp (from 11/2020 MKB:DNFE) With parts certificate! With our Wagner Tuning Competition intercooler, we offer you the perfect solution to exploit the full potential of your vehicle and experience an extraordinary driving experience. With impressive mesh dimensions of 620 mm x 440 mm x 65 mm and an external charge air volume of 17.7 liters (compared to 9 liters for OEM), this high-performance charge air cooler ensures optimum cooling of the charged air. Our newly developed competition high-performance mesh (Tube Fine) not only enables excellent cooling performance, but also ensures sufficient airflow for adjacent components such as the water cooler. The intercooler remains lightweight and weighs only 9.2 kg in total. The cast aluminium end boxes have been optimized using CAD technology and CFD simulations to achieve optimum internal airflow. An integrated air duct in the end box ensures even filling of the competition high-performance mesh. With an inlet and outlet diameter of Ø70 mm, this intercooler offers a significantly lower back pressure compared to the intercooler fitted as standard. In addition, all our charge air coolers are provided with a high-quality anti-corrosion coating, which not only ensures protection against environmental influences, but also has superior heat conduction properties. This ensures a long-lasting and optimum cooling effect with a noticeable increase in performance. Installation is carried out by simply replacing the OEM intercooler and is straightforward. You can rely on our constant quality monitoring to offer you only the highest quality products. Boost your vehicle's performance to a new level and rely on the Competition intercooler. Treat yourself to the upgrade your vehicle deserves! Important information!Our intercooler is currently only compatible with the 5Q0-121-251GN engine water cooler. We are currently working on a solution for vehicles equipped with the current 5WA121251H engine water cooler. Scope of delivery:1 intercooler2 silicone hoses4 hose clamps1 mounting material1 assembly instruction1 parts certificate With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

Facts: Material: Carbon Manufacturer: Eventuri We are pleased to release our carbon engine cover for the VW Golf 8 platform.Compatible vehicles: VehicleTypePowerEngine capacityEngine type Audi A3 (8Y)S3 2.0 TFSI quattro228kW / 310hp1984cm³DNFB (from 09.20) Audi TT (8J1/8S)45 TFSI quattro180kW / 245hp1984cm³DNPA (from 10.20) Audi TT (8J1/8S)TTS 2.0 TFSI quattro235kW / 320hp1984cm³DNFD (from 11.20) Audi Q3 (F3)45 TFSI quattro180kW / 245hp1984cm³DNPA (from 01.21) Cupra Ateca (KH)2.0 TSI 4Drive221kW / 300hp1984cm³DNFC (from 07.20) Cupra Formentor (KM)2.0 TSI 4Drive140kW / 190hp1984cm³DNPA (from 03.21) Cupra Formentor (KM)2.0 TSI180kW / 245hp1984cm³DNPA (from 03.21) Cupra Formentor (KM)2.0 TSI 4Drive228kW / 310hp1984cm³DNFB (from 11.20) Cupra Leon (KL)2.0 TSI180kW / 245hp1984cm³DNPA (from 04.21) Cupra Leon (KL)2.0 TSI221kW / 300hp228kW / 310hp1984cm³DNFC (from 01.21)DNFB (from 06.21) Seat Tarraco (KN)2.0 TFSI 4Drive180kW / 245hp1984cm³DNPA (from 01.21) Skoda KodiaqRS 2.0 TSI 4x4180kW / 245hp1984cm³DNPA (from 06.21) Skoda Octavia IV (NX)RS 2.0 TFSI180kW / 245hp1984cm³DNPA (from 09.20) Skoda Superb III (3V)2.0 TSI 4x4206kW / 280hp1984cm³DNFE (from 11.20) VW Arteon2.0 TSI 4motionR 2.0 TSI 4motion206kW / 280hp235kW / 320hp1984cm³DNFE (from 11.20)DNFG (from 12.20) VW Golf 8GTI 2.0 TSI180kW / 245hp1984cm³DNPA (from 08.20) VW Golf 8GTI Clubsport/ED45 2.0 TSI221kW / 300hp1984cm³DNFC (from 10.20) VW Golf 8R 2.0 TSI 4motion235kW / 320hp1984cm³DNFG (from 12.20) VW Passat B8 (3G)2.0 TSI 4motion206kW / 280hp1984cm³DNFE (from 11.20) VW T-Roc (A1 Facelift)2.0 TSI 4motion221kW / 300hp1984cm³DNFC (from 11.21) VW Tiguan II (AD)2.0 TSI 4motion180kW / 245hp1984cm³DNPA (from 11.20) VW Tiguan II (AD)R 2.0 TSI 4motion235kW / 320hp1984cm³DNFG (from 11.20)

Facts: Performance increase (standard Golf R): 10-13hp, 12-15Nm Performance increase (tuned Golf R): 15-20hp, 25-30Nm Material: Carbon fibre Manufacturer: Eventuri Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) The MK8 Golf GTi/R intake manifold is a complete revision of the standard intake manifold up to the turbo inlet. Taking inspiration from our RS3 intake, we have maximised the space available to create an intake that is suitable for all power levels, from standard specification through to high performance systems with hybrid or full frame turbos. This intake system has been developed to provide the highest possible flow rate whilst achieving the lowest possible intake temperatures. Each component has been designed to give the turbo a smooth and clear flow path. The restrictive standard intake pipe with a diameter of 73 mm is replaced by an intake pipe with a larger diameter of 94 mm. The filter itself has an outer diameter of 192mm or 7.5? with a filter area of over 110,000mm^2. The patented Venturi housing is designed to provide the largest possible internal volume for the available space in the Golf engine bay and provides laminar flow to the turbo pipe. Finally, the duct seals the filter opening at the windscreen, but is not restricted by the standard intake alone. We have raised the front of the duct to now create an additional opening behind the bonnet, equivalent to an extra 7? diameter hole for the inlet to draw from. The resulting system can significantly outflow the stock airbox while keeping intake temperatures to a minimum with the sealed design. Dyno testing Our MK8 Golf intake has been independently tested by a renowned tuner in the UK, Regal Autosport. A MK8 Golf R was tested in original condition and with a tuning box. The tests were carried out on the same day, with the standard airbox being tested first and then the Eventuri. No other changes were made to the car. The first graph shows the results with a stock map. As can be seen, there is a measurable gain across the rev range of up to 12bhp. This gain is noticeable even in a standard vehicle on the road due to better throttle response and faster acceleration. The second diagram shows the results when using a tuning box that increases the flow requirement of the intake system. The tuning box was used for both the standard airbox and the Eventuri intake, with no changes made between tests. With a higher flow requirement, the stock airbox places a greater restriction on the turbo, which is evident by the significant gain achieved with the Eventuri fitted. We now have a power increase of up to 20 hp and 30 Nm across the entire rev range, which is even more noticeable on the road. We expect the gains to be even greater with higher tuning levels. The improvements are due to a combination of reasons: 1) The closed system keeps IAT levels low - the Golf's engine bay can heat up very quickly, so an open cone filter leads to an increase in IAT levels and therefore a loss of power. 2) The Venturi housing provides a smooth transition from the filter to the intake pipes, both of which are matched to an internal diameter of 94mm. This contributes to a more efficient operation of the turbo. 3) The entire system is made from pure pre-impregnated carbon fibre, which provides excellent insulation against heat and has smooth internal surfaces, unlike glass fibre, which has sharp resin lines. Parts certificate The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT Audi S3 (8Y) e1*2007/46*2060*.. DE/AT Audi TTS (FV/FVP/8S e1*2001/116*0369*.. DE/AT Cupra Ateca LCI e9*2007/46*6394*.. DE/AT Cupra Formentor e9*2007/46*4008*.. DE/AT Cupra Leon e9*2007/46*3167*.. DE/AT Skoda Octavia RS e8*2007/46*0355*.. DE/AT Skoda Superb e8*2007/46*0317*.. DE/AT Volkswagen Arteon R e1*2007/46*1725*.. DE/AT Volkswagen Golf 8 GTI e1*2007/46*2014*.. DE/AT Volkswagen Golf 8 GTI CS e1*2007/46*2014*.. DE/AT Volkswagen Golf 8R e1*2007/46*2014*.. DE/AT Volkswagen Tiguan R e1*2001/116*0450*.. DE/AT Volkswagen Tiguan R (AD1) e1*2007/46*0487*.. Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine type Audi A3 (8Y)S3 2.0 TFSI quattro228kW / 310hp1984cm³DNFB Audi Q2 (GA)SQ2 2.0 TFSI quattro221kW / 300hp1984cm³DNFC Cupra Ateca (KH)2.0 TSI 4Drive221kW / 300hp1984cm³DNFC Cupra Leon (KL)2.0 TSI221kW / 300hp228kW / 310hp1984cm³DNFCDNFB Cupra Formentor (KM)2.0 TSI 4Drive228kW / 310hp1984cm³DNFB VW Arteon2.0 TSI 4motionR 2.0 TSI 4motion206kW / 280hp235kW / 320hp1984cm³DNFEDNFG VW Golf 8GTI Clubsport/ED45 2.0 TSI221kW / 300hp1984cm³DNFC VW Golf 8R 2.0 TSI 4motionR 2.0 TSI 4motion 20Years235kW / 320hp245kW / 333hp1984cm³DNFGDNNF VW Passat B8 (3G)2.0 TSI 4motion206kW / 280hp1984cm³DNFE VW T-Roc (A1)2.0 TSI 4motion221kW / 300hp1984cm³DNFC VW Tiguan II (AD)R 2.0 TSI 4motion235kW / 320hp1984cm³DNFG

The certificate includes the increase in rated power to 227-326kW/309-443PS (depending on the vehicle and hardware installed).Note: The purchase of the performance upgrade does not include registration in the vehicle documents. This must be purchased separately.To get the maximum performance from your vehicle, we recommend filling up with premium fuel (100/102 octane) before and after the optimisation. The following hardware components may also be installed individually or in combination for all listed vehicles as part of our combination certificate: - HJS downpipe- Wagner Tuning intercooler- Wagner Tuning intake system- Wagner Tuning pressure pipes- Aulitzky exhaust systemIn combination with all the hardware, a legal stationary noise increase to 102dB is possible. Compatible vehicles:VehicleTypePower outputEngine capacityEngineNew rated powerNote Audi A3 (8YA/8YS)S3 quattro228kW / 310PS1984cm³DNFB1) 281kW (382PS)2) 326kW (443PS)optionally in conjunction with the standard or Aulitzky exhaust system Audi Q3 (F3B/F3N)45 TFSI quattro180kW / 245PS1984cm³DNPA1) 227kW (309PS)2) 253kW (344PS)only in conjunction with the standard exhaust system Audi TT (FV3/FV9)45 TFSI / quattro180kW / 245PS1984cm³DNPA1) 227kW (309PS)2) 253kW (344PS)optionally in conjunction with the standard or Aulitzky exhaust system Audi TT (FV3/FV9)TTS quattro235kW / 320PS1984cm³DNFG1) 281kW (382PS)2) 326kW (443PS)optionally in conjunction with the standard or Aulitzky exhaust system Cupra Ateca (KH)2.0 TSI 4Drive221kW / 300PS1984cm³DNFC1) 281kW (382PS)2) 326kW (443PS)only in conjunction with the standard exhaust system Cupra Leon (KL1/KL8)2.0 TSI180kW / 245PS1984cm³DNPA1) 227kW (309PS)2) 253kW (344PS)optionally in conjunction with the standard or Aulitzky exhaust system Cupra Leon (KL1/KL8)2.0 TSI / 4Drive221kW / 300PS228kW / 310PS1984cm³DNFB, DNFC1) 281kW (382PS)2) 326kW (443PS)optionally in conjunction with the standard or Aulitzky exhaust system Skoda Octavia IV (NX5)RS 2.0 TSI180kW / 245PS1984cm³DNPA1) 227kW (309PS)2) 253kW (344PS)only in conjunction with the standard exhaust system VW Golf VIII (CD1)GTI 2.0 TSI180kW / 245PS1984cm³DNPA1) 227kW (309PS)2) 253kW (344PS)optionally in conjunction with the standard or Aulitzky exhaust system VW Golf VIII (CD1)GTI CS/ED45 2.0 TSI221kW / 300PS1984cm³DNFC1) 281kW (382PS)2) 326kW (443PS)optionally in conjunction with the standard or Aulitzky exhaust system VW Golf VIII (CD1/CDV)R 2.0 TSI 4motion235kW / 320PS245kW / 333PS1984cm³DNFF, DNFG1) 281kW (382PS)2) 326kW (443PS)optionally in conjunction with the standard or Aulitzky exhaust system VW Tiguan (AD1)2.0 TSI180kW / 245PS1984cm³DNPA1) 227kW (309PS)2) 253kW (344PS)only in conjunction with the standard exhaust system VW Tiguan (AD1)R 2.0 TSI 4motion235kW / 320PS1984cm³DNFG1) 281kW (382PS)2) 326kW (443PS)only in conjunction with the standard exhaust system VW T-Roc (A1)R 2.0 TSI 4motion221kW / 300PS1984cm³DNFC1) 281kW (382PS)2) 326kW (443PS)only in conjunction with the standard exhaust system 1) with Wagner Turbo Outlet2) with Wagner Turbo Outlet + HJS downpipe

Suitable for the following models:VW Golf VIII Type CD 2.0 GTI 180kW / 245PS (from 08/2020 MKB: DNPA)VW Golf VIII Type CD 2.0 GTI Clubsport/ED45 220KW/300PS (from 10/2020 MKB: DNFC) Optimise the performance and reliability of your VW Golf 8 GTI 2.0TSI with our high-quality silicone hose kit, specially developed for the EA888 Gen.4 engine. This kit provides a direct replacement for the stock hoses and ensures improved airflow for optimised performance. High quality materials:Made from high quality silicone for maximum durability and reliability. Precise fit:The hoses are precisely matched to the requirements of the EA888 Gen.4 engine to ensure a perfect fit and optimum performance. Improved airflow:Improved airflow increases engine performance and optimises engine response. Easy installation: Installation is straightforward and requires no special tools. Simply replace the standard hoses with the new silicone hoses and secure with the hose clamps provided. Compatibility:This hose kit is only compatible with the original Wagner Tuning intercooler. Note: Please note that the article image is for illustrative purposes only and the actual product may differ slightly. Scope of delivery:2 silicone hoses4 hose clamps