Suitable for the following vehicles:Mercedes C190 AMG GT 340-390KW/462-530hp (2015-2020)Mercedes C190 AMG GT S 340-390KW/462-530hp (2015-2020)Mercedes C190 AMG GT C 410KW/557hp (2017+)Mercedes C190 AMG GT R 430KW/585hp (2017+)
The Wagner Tuning air intake system sets new standards for the performance optimization of your Mercedes-AMG GT. As a direct replacement for the standard system, it specifically eliminates its weak points and optimizes the performance of your vehicle.
Our carbon air intake system was developed with a flow-optimized carbon air intake cover, a plastic lower section and a Ø102mm (4 inch) carbon tube. These components ensure optimum flow characteristics without unnecessarily blocking or swirling the intake air.
By adjusting the connection diameter towards the turbocharger to Ø76mm and using silicone hoses, the air mass flow rate is increased by an impressive +42%. This leads to improved engine response and a direct increase in performance. Our air intake system also includes 50% larger filter surfaces, ensuring optimum filtration with minimal pressure loss. This keeps the air quality at the highest level while maximizing performance.
In addition to the increase in performance, our air intake system also impresses with its visual appearance and high-quality finish, which enhances the engine compartment of your Mercedes-AMG GT.
Ready to take your driving experience to a new level? Experience maximum performance and first-class design with the Wagner Tuning carbon air intake system for your Mercedes-AMG GT.
Scope of delivery:2 carbon airbox covers2 plastic airbox lower part2 carbon tube2 silicone adapter hoses (black)2 sports air filters1 mounting material1 installation instructionAttention: Not approved in the area of the StVZO.
Unleash the ultimate performance of your Mercedes AMG GT M178 and transform your driving experience with the BlackBoost Gen-2 Cold Air Intake System - a premium upgrade that boosts performance, optimizes airflow and enhances style. Whether you're aiming for thrilling stock performance or want to push your AMG to over 1000 WHP, this system is designed to deliver unprecedented results.
The factory airbox, while adequate for normal use, limits airflow and filter surface area, limiting your car's true potential. The BlackBoost Cold Air Intake is precisely engineered to overcome these limitations by maximizing airflow and minimizing intake temperatures - while fitting seamlessly into the engine bay of your AMG GT.
Advanced design features- CFD Optimized Intake Pipes: Made from molded synthetic composite material, these pipes provide smooth, high-flow air delivery and feature a 1/8 NPT port for methanol injection to support extreme power setups.- Oversized turbo coupler and intake manifold: The oversized turbo coupler and intake duct are strategically designed to maximize airflow and improve engine efficiency and performance in all driving conditions.- 5.5-inch High-Flow Synthetic Dry Air Filter: These oversized filters are designed for superior filtration and maximum airflow. They protect your engine while increasing performance.- Laser-cut aluminum airbox panels: These airboxes are strong, lightweight and powder-coated for a sleek finish. They are built to last and ensure a precise seal to keep the intake air temperature cool.- Customized cover: This high-quality engine cover improves protection while providing a classy, polished look that enhances the aesthetics of your engine bay.- Plug-and-play installation: No ECU tuning or additional modifications are required. The system easily integrates into your AMG GT's existing setup and supports further upgrades such as turbochargers, downpipes and methanol injection.
Important performance benefits- Proven 8-30+ hp increase on production vehicles- Improved throttle response and airflow across the entire rev range- Higher volumetric efficiency and filter surface area compared to OEM parts- Supports extreme airflow requirements for systems with more than 1000 WHP- Oversized turbocharger and intake duct for optimized airflow and engine performance- Customized engine cover for enhanced protection and style- No check engine light (CEL) or ECU tuning required
Scope of delivery:- Powder-coated airbox and custom engine cover- 5.5-inch high-flow synthetic dry air filter- Molded synthetic composite intake manifold with 1/8 NPT methanol port- Oversized turbo coupler and intake port- CNC anodized plug- AMG badge transfer kit- 1/8 NPT plug
Compatible vehicles:AMG GT (C190/R190) - M178 4.0L V8 BiTurbo - (2015 - 2021)AMG GT S (C190/R190) - M178 4.0L V8 BiTurbo - (2016 - 2021)AMG GT C (C190/R190) - M178 4.0L V8 BiTurbo - (2017 - 2021)AMG GT R (C190/R190) - M178 4.0L V8 BiTurbo - (2018 - 2021)
Developed using the latest CAD technology to ensure a high flow rate and a perfect fit.
Facts:
- Beautiful racing exhaust sound
- Enormous improvement of the exhaust flow
- Complete bypass of the primary and secondary catalytic converter
- DPF & OPF* catalytic converters
- High power/torque increases depending on modifications
- Reduces back pressure in turbo applications
- Manufactured entirely from low carbon 304 stainless steel
- Mandrel bent and laser cut components
- Hand finished
- Bolt-on plug-and-play installation
Technical details:
- 3.5"
- 304 stainless steel
- V-band connection in 3"
- Handmade in-house
- Screw mounting
Not street legal.For racing use only.Purchase, install and use at your own risk.Requires tuning to remove the check engine light as the factory catalytic converters have been removed.
Compatible vehicles:
AMG GT (C190/R190) - M178 4.0L V8 BiTurbo - (2015-2021)
AMG GT S (C190/R190) - M178 4.0L V8 BiTurbo - (2015-2022)
AMG GT C (C190/R190) - M178 4.0L V8 BiTurbo - (2015-2023)
AMG GT R (C190/R190) - M178 4.0L V8 BiTurbo - (2015-2024)
KW V5 Clubsport coilover suspension incl. support bearings (incl. decommissioning for electric dampers)
The new 4-way adjustable KW V5 Clubsport offers the latest KW Solid Piston GT3 motorsport suspension technology for the sportiest road cars with sports tyre setup for use on the race track and on the road. The entire suspension design of the KW V5 Clubsport coilover suspension with its unibal bearings is designed for the use of semi-slick tyres on close-to-production vehicles.
KW Solid Piston Technology for the race track and road
In contrast to vibration dampers with overflowed working pistons, KW uses its KW Solid Piston Technology (displacement piston design), which is proven in motorsport and homologated for vehicles such as the BMW M4 GT3 and Porsche 911 GT3 R, in the KW V5 Clubsport coilover suspension. The compression and rebound valves, which can be adjusted separately in the low-speed and high-speed forces, are arranged separately from the damper inner tube and the piston rod. As a result, the KW V5 Clubsport with adjustable KW SPCLH-A (KW Solid Piston Compression Low- and Highspeed Adjustable) compression damping and the KW SPRLH-A (KW Solid Piston Rebound Low- and Highspeed Adjustable) rebound damping offers significant added value.
- More sensitive and high-frequency damping
- Cavitation-free function
- Low-pressure gas range from 6 to 10 bar
- Unique, independently acting damper force adjustment
- Freely adjustable damping technology for compression and rebound damping
- Adjustable low-speed compression damping with 13 exact clicks
- Adjustable high-speed compression damping with 13 exact clicks
- Adjustable low-speed rebound damping with 13 exact clicks
- Adjustable high-speed rebound damping with 13 exact clicks
- Stepless lowering
- Tested adjustment range
- Aluminium Unibal support bearing
- parts certificate
- High-quality components for a long service life
The bodywork remains perfectly supported during aggressive steering manoeuvres and extreme compression. Thanks to the adjustable multi-valve technology, the KW V5 Clubsport dampens bumps and relatively large transverse joints cleanly. Even when hitting curbs, near-series sports cars remain safely controllable with the KW V5 Clubsport coilover suspension. The height adjustment options allow the wheel loads to be adapted. The adjustment options, combined with the damping technology (SPCLH-A and SPRLH-A technology), which can be adjusted separately in compression and rebound, enable individual setups to suit the vehicle weight, tyre characteristics, different track conditions and operating conditions - thanks to multi-valve technology and parts certificates, the KW V5 Clubsport coilover suspension can also be used on public roads.
Setup: Application range and damper tuning
The KW V5 Clubsport coilover suspension with its KW Solid Piston Technology is the ideal upgrade to drive near-series sports cars safely and quickly with semi-slick tyres on trackdays and tourist drives on race tracks. Thanks to the parts certificate, the KW V5 Clubsport can also be used in everyday life on public roads.
Please note the conditions and instructions for this product:
- VA + HA height-adjustable (coilover struts)
- For vehicles with electronic damper control, this must be deactivated. Vehicle-specific KW decommissioning kits can be found in the accessories table.
- The dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted if the piston rod is accessible.
- Aluminum struts (no Inox-line)
- Clubsport suspension with support bearing: available with VA + HA support bearing
Technical information:
- Lowering VA/HA (mm): 25-40/30-45
- Axle load VA/HA (kg): -930/-1100
- Version: V5 Clubsport
- Height adjustment: Rebound and compression damping
- Material: Aluminum
- Adjustment VA/HA: thread/thread
- Approval: Parts certificate (§19.3)Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
Mercedes AMG GT (C190) 197 10/2014- GT (190.377) Coupe Petrol 340 KW 3982 ccm 8 Rear-wheel drive
Mercedes AMG GT (C190) 197 10/2014- GT (190. 377) Coupe Petrol 350 KW 3982 ccm 8 Rear-wheel drive
Mercedes AMG GT (C190) 197 10/2014- GT (190.382) Coupe Petrol 390 KW 3982 ccm 8 Rear-wheel drive
Mercedes AMG GT (C190) 197 10/2014- GT C (190.380) Coupe Petrol 410 KW 3982 ccm 8 Rear-wheel drive
Mercedes AMG GT (C190) 197 10/2014- GT S (190. 378) Coupe Petrol 375 KW 3982 ccm 8 Rear-wheel drive
Mercedes AMG GT (C190) 197 10/2014- GT S (190.378) Coupe Petrol 384 KW 3982 ccm 8 Rear-wheel drive
Mercedes AMG GT Roadster (R190) 197 11/2016- GT (190.477) Cabriolet Petrol 350 KW 3982 ccm 8 Rear-wheel drive
Mercedes AMG GT Roadster (R190) 197 11/2016- GT (190. 477) Cabriolet Petrol 390 KW 3982 ccm 8 Rear-wheel drive
Mercedes AMG GT Roadster (R190) 197 11/2016- GT C (190.480) Cabriolet Petrol 410 KW 3982 ccm 8 Rear-wheel drive
Mercedes AMG GT Roadster (R190) 197 11/2016- GT S (190.478) Cabriolet Petrol 384 KW 3982 ccm 8 Rear-wheel drive
The Wagner Tuning Performance intercooler kit is suitable for the following models:Mercedes C190 AMG GT 340-390KW/462-530hp (2015-2020)Mercedes C190 AMG GT S 340-390KW/462-530hp (2015-2020)Mercedes C190 AMG GT C 410KW/557hp (2017+)Mercedes C190 AMG GT R 430KW/585hp (2017+)
Boost the performance of your Mercedes-AMG to a new level with our groundbreaking Wagner Tuning high performance intercooler!
The 4.0 liter V8 BiTurbo engine (M178 DE 40 AL) of your AMG model is equipped with an indirect charge air cooling circuit, which is replaced by our innovative intercooler.
Our high-performance intercooler features an innovative performance mesh measuring 209 mm x 175 mm x 110 mm, which has been specially developed to meet the demanding requirements of your AMG engine. With an impressive 86% larger outer mesh volume compared to the original radiator, the optimal ratio between inner and outer cooling surface allows for maximum heat transfer and optimal internal airflow. The cast aluminium end boxes have been optimized using the latest CAD technology and CFD simulations to ensure outstanding cooling performance with minimal back pressure. This kit is therefore also ideally suited for racing and ensures optimum cooling of the supercharged air with a significant increase in performance!
To ensure that your vehicle is always optimally cooled, our Wagner Tuning intercooler is equipped with a thermally conductive anti-corrosion coating, which guarantees a long-lasting and effective cooling effect. Installation of the system is straightforward thanks to our detailed installation instructions and can be carried out in plug & play style.
Advantages:- Significantly improved cooling performance for your engine- Reduced back pressure for optimum performance- More power and torque for a more intense driving experience- Mechanical relief of the turbocharger for a longer service life- 100% pressure resistance for maximum reliability- Simple plug & play installation without complex modifications- Up to 4-year warranty for a worry-free driving experience
Give your Mercedes-AMG the performance it deserves with our high-quality Wagner Tuning high-performance intercooler. Order today and experience the power!
Mesh dimensions OEM intercooler:177 mm x 153 mm x 80 mmV = 2.16 liters
Mesh dimensions Wagner Tuning intercooler:209 mm x 175 mm x 110 mmV = 4.02 liters (+86%)
Scope of delivery:2 intercoolers4 silicone air hoses1 mounting materialAttention: Not approved in the area of the StVZO.
Blackboost Conical Twin Flow Synthetic Dry Air Filters
The filter consists of two filter elements, firstly the primary filter element on the outside.
The secondary filter element on the top increases the surface area through which the air can flow. Underneath the secondary filter element is a TPU cone which helps to direct the air flowing through the filter, reducing turbulence and increasing the overall flow rate.
We opted for dry filters as they allow us to cover a wide range of applications involving mass airflow sensors that are damaged over time by oiled filters. With the synthetic cotton filter element, we can work completely dry (unoiled) and still ensure good filtration and airflow.
The layers of the synthetic filter material are better than its non-synthetic counterpart as the layered structure of the synthetic cotton allows a homogeneous airflow through the filter.
The kits include the hoses, the moulded plastic composite adapters and the necessary BlackBoost SS316 clamps to keep the components well in place.
Features:
-Twin Flow technology for more air
-Black Boost centre cone for flow optimisation
-High flow and homogeneous synthetic filtration
-High protection through synthetic filtration
-High heat resistance
-Plug and Play: can be used in universal applications
-Fits plug and play on BlackBoost intake manifolds
-Upgraded look, non-invasive, completely black
-316 stainless steel BlackBoost clamp for secure attachment
-Inlet diameter: 4.3"/ 110mm
-Length: 8.6"/ 218mm
Scope of delivery:
2x Blackboost Twin Flow Synthetic Dry Conical air filter
2x Black Boost stainless steel 316 clamps
Suitable for the following vehicles:
Mercedes C190 AMG GT 340-390KW/462-530hp (2015-2020)
Mercedes C190 AMG GT S 340-390KW/462-530hp (2015-2020)
Mercedes C190 AMG GT C 410KW/557hp (2017+)
Mercedes C190 AMG GT R 430KW/585hp (2017+)
The 4.0L V8 biturbo engine of the AMG GT models is equipped with an indirect charge air cooling circuit. This means that the charge air cooling process is not realised using the ambient air as a cooling medium (as usual), but with the help of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water cooler come into play.
The newly developed competition racing mesh of the WAGNERTUNING high-performance water cooler increases the radiator volume of the standard water cooler by a total of 75 %. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the neighbouring components (e.g. the engine water cooler behind it) sufficient air flow for heat exchange. Furthermore, the water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. Installation of the system is also uncomplicated and plug & play with the help of our installation instructions.
OEM front cooler dimensions:
640 mm x 420 mm x 26 mm
V = 7.00 litres
A = 2688 cm²
WT front cooler dimensions:
645 mm x 395 mm x 52 mm
V = 12.2 litres +75%
A = 2546 cm²
Attention: Not approved in the area of the StVZO.