The Wagner Tuning carbon air intake system fits the following vehicles:Audi RS6 C8 441KW/600hp (2020+)Audi RS7 C8 441KW/600hp (2020+) Discover the new Wagner Tuning carbon fibre air intake system for Audi RS6 and RS7 C8: Maximum performance, breathtaking design! The state-of-the-art Wagner Tuning air intake system has been specially developed for the powerful Audi RS6 and RS7 C8 models and sets new standards in terms of performance and design. Our air intake system replaces the standard system and effectively eliminates its restrictions. Thanks to the flow-optimised carbon cover and the enlarged turbo inlets, the system ensures optimum flow characteristics without blocking or swirling the air supply. The supplied plate filter also ensures a first-class filter effect with minimum pressure loss. By installing our air intake system, the back pressure is reduced by an impressive 38%, resulting in improved response behaviour and an increase in engine performance. In addition to its outstanding performance, our air intake system also impresses with its breathtaking design. The carbon airbox cover and the high-quality components refine the engine compartment and give your vehicle a unique look. Scope of delivery:1 carbon airbox cover1 sports air filter mat2 turbo inlet adapters2 silicone hoses (black)Assembly materialInstallation instructions Boost the performance and style of your Audi RS6 and RS7 C8 with the Wagner Tuning carbon air intake system. Order now and experience the ultimate driving experience!Order now and find out more - your way to unrivalled performance and aesthetics! Attention: Not approved in the area of the StVZO.

Facts: - replaces the main catalyst - with 2x 100 cell stainless steel sports catalyst - Euro 6 compatible - for non-OPF vehicles - without approval in the area of the StVZO Compatible vehicles:VehicleVehicle typePowerEngine capacityEngineYear of construction AudiS6 quattro (4G)309kW / 420hp3993cm³CEUC02.12 - 09.18 AudiS6 quattro (4G)331kW / 450hp3993cm³CTGE10.14 - 09.18 AudiRS6 quattro (4G)412kW / 560hp3993cm³CRDB, CWUB01.13 - 09.18 AudiRS6 performance quattro (4G)445kW / 605hp3993cm³CWUC11.15 - 09.18 AudiS7 quattro (4G)309kW / 420hp3993cm³CEUC02.12 - 03.15 AudiS7 quattro (4G)331kW / 450hp3993cm³CTGE07.14 - 05.18 AudiRS7 quattro (4G)412kW / 560hp3993cm³CRDB, CWUB10.13 - 04.18 AudiRS7 performance quattro (4G)445kW / 605hp3993cm³CWUC11.15 - 04.18 Note: Depending on the software version, the engine control light may light up. We recommend a software adjustment in this case.

Facts: Power gain: 15-19hp, 13-17ft-lb V-box acceleration: 60-130mph reduced by 0.4 seconds Material: Carbon Manufacturer: Eventuri Expertise: without !!!IMPORTANT!!! The article does not fit on models with auxiliary heating The Audi C7 S6/S7 Eventuri intake system sets a new benchmark for the intake system on this platform. It has been designed to achieve two goals - 1) Relieve the turbo intake paths. 2) Maintain low inlet temperatures. The first objective was achieved by fitting each turbo with a separate filter and venturi funnel to reduce drag and allow the turbos to work more efficiently. The second goal was achieved by enclosing the filters in a carbon air chamber and feeding them with an additional scoop mounted behind the front grille. The engine bay of the C7 RS6/RS7 has multiple heat sources from different directions, so a simple configuration of open filters and shielding would result in higher IAT values. Our carbon airbox housing has been designed to maximise the available volume and block all heat sources. The resulting performance gains and aesthetics are industry leading for the C7 S6/S7. The Eventuri difference The C7 S6/S7 Eventuri system utilises 2 Eventuri funnels mounted on the filters that seamlessly merge into the turbo pipes. These provide an aerodynamically efficient airflow path from the filters to the turbos. Not just another cone filter with a heat shield, but a unique design that creates the Venturi effect and allows laminar flow through the pipes, reducing drag on the turbos. Compatible vehicles:VehicleTypePower outputDisplacementEngineYear of construction Audi A6 (C7)S6 quattro309kW / 420PS331kW / 450PS3993ccCEUCCTGE02.12 - 09.1810.14 - 09.18 Audi A7 (4G)S7 quattro309kW / 420PS331kW / 450PS3993ccCEUCCTGE02.12 - 09.1807.14 - 05.18

The Wagner Tuning Competition intercooler kit is suitable for:Audi A6 4G (Allroad) 3,0 BiTDI 230KW/313PS 2011-2014Audi A6 4G (Allroad) 3,0 BiTDI 235-240KW/320-326PS 2014-Audi A7 4G 3.0 BiTDI 230KW/313PS 2011-2014Audi A7 4G 3.0 BiTDI 235-240KW/320-326PS 2014- Revolutionary cooling performance for your Audi 3.0 BiTDI - The Competition high-performance intercooler kit Ready to give your Audi 3.0BiTDI a performance boost? The Competition high performance intercooler kit is the answer you've been looking for. With state-of-the-art technology and customised design, this intercooler takes your driving expertise to a new level. With mesh dimensions of 610mm x 440mm x 65mm (17.446L), this intercooler offers an impressive 178% larger flow area and a remarkable 158% more charge air volume compared to the original intercooler. This means a dramatic increase in your engine performance and improved cooling capacity. The Competition high-performance network is a technical masterpiece. It is a high quality Tube Fin mesh with internal turbulators which, in combination with the intercooler, delivers exceptional cooling performance. Surprisingly, despite its size, the intercooler only weighs a light 9.1kg. The cast aluminium end boxes were developed in CAD and optimised for optimum internal airflow using CFD simulations. An integrated air duct in the end box ensures homogeneous filling of the competition high-performance network. The connection diameters have been extended to Ø67 mm, which is why this kit is supplied with reinforced silicone hoses. The result is an intercooler with considerably less back pressure compared to the standard intercooler. All our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This guarantees permanent and optimum cooling, which in turn leads to a noticeable increase in performance. This kit is completely ready to install and enables uncomplicated replacement with the standard intercooler. A plug-and-play experience that saves time and effort. This intercooler has been tested up to 6 bar and is pressure-stable. It therefore fulfils the requirements of racing. Put an end to performance restrictions. Get the Competition high-performance intercooler kit and experience how your Audi 3.0 BiTDI awakens to new strength. Advantages of the Wagner Tuning intercooler:- improved cooling properties- 178 % larger inflow area- 158 % more charge air volume- Connection diameter increased to Ø67 mm- Less back pressure- Plug & Play Scope of delivery:1 intercooler2 charge air hoses [67 mm inlet and outlet]4 hose clamps1 mounting material1 assembly instruction Attention: Not authorised in the area of the StVZO.

The Wagner Tuning Competition intercooler kit is suitable for:Audi A6 4G (allroad) 3,0 TDI 150KW/204hp 2010-2014Audi A6 4G (allroad) 3,0 TDI 160KW/218hp 2014-Audi A6 4G (allroad) 3,0 TDI 180KW/245hp 2010-2014Audi A6 4G (allroad) 3,0 TDI 200KW/272hp 2014-Audi A7 4G 3,0 TDI 150KW/204hp 2010-2014Audi A7 4G 3.0 TDI 160KW/218hp 2014-Audi A7 4G 3,0 TDI 180KW/245hp 2010-2014Audi A7 4G 3,0 TDI 200KW/272hp 2014- Increase the performance of your Audi A6 C7 3.0 TDI with our Competition intercooler kit. We proudly present our Wagner Tuning Competition intercooler kit. Designed to take the performance of your Audi A6 C7 3.0 TDI to the next level. Here you can see what makes this kit so special:Our intercooler kit offers remarkable cooling performance with minimal weight. At just 9.1 kg, it's significantly lighter than the stock cooler, boosting your vehicle's performance and efficiency. We have developed free-form end boxes made from high quality cast aluminum that have been perfected in the CAD system. These end boxes ensure optimum internal airflow and therefore better cooling efficiency. Our Competition mesh not only offers a 178% larger cooling surface, but also 158% more volume compared to the factory radiator. This leads to a drastic reduction in back pressure. We have added a special coating that not only prevents corrosion, but also dissipates heat. This guarantees long-lasting and optimum cooling with a noticeable increase in performance. Our kit is completely ready to install and fits 100% in your vehicle. Replacement with the stock intercooler is straightforward and made easy with the instructions provided. This kit is designed for optimum performance, offering a 67mm inlet and outlet to ensure your supercharged air is cooled as efficiently as possible. Maximize the performance of your Audi A6 C7 3.0 TDI with our Competition intercooler kit. Visit our website for more information and to order your kit. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 178% larger cooling surface- 158% more charge air volume- 67 mm inlet and outlet- uncomplicated replacement Scope of delivery:1 intercooler2 charge air hoses4 hose clamps1 mounting material1 assembly instructionAttention: Not approved in the area of the StVZO.

The Wagner Tuning Competition intercooler kit is suitable for:Audi A6 C8 45TDI 170KW/231hp (2018+)Audi A6 C8 50TDI 210KW/286hp (2018+)Audi A7 C8 45TDI 170KW/231hp (2018+)Audi A7 C8 50TDI 210KW/286hp (2018+) Unleash the full potential of your vehicle with the Wagner Tuning Competition high-performance intercooler. With its impressive technical data, this intercooler sets new standards in terms of performance and cooling. The Competition high-performance intercooler impresses with generous mesh dimensions of 550mm x 445mm x 70mm, which corresponds to a total volume of 17,130cm³. Thanks to this impressive size, it offers a 134% larger inflow area and a 105% increase in charge air volume compared to the standard intercooler. The high-quality Tube Fin mesh with internal turbulators ensures optimum air flow and maximum cooling performance. Despite its impressive dimensions, the total weight of the intercooler is just 9.5 kg, which saves weight and improves vehicle dynamics. The cast aluminium end boxes of the charge air cooler have been optimized with the help of flow analyses in the CFD system in order to achieve outstanding cooling performance with minimum back pressure. The connection diameters at the charge air cooler inlet are Ø62 mm and at the charge air cooler outlet Ø67 mm to ensure optimum flow efficiency. Another highlight is the anti-corrosion coating with excellent heat conduction properties, which is added to all our intercoolers. This ensures permanent and optimum cooling with a significant increase in performance. The intercooler kit is completely ready to install and can be easily replaced with the standard intercooler - simply plug and play. It has been tested up to 6 bar and is pressure-stable, so you can rely on its reliability. Our products are subject to constant quality monitoring to ensure the highest standards. The Competition high-performance intercooler is specially designed for racing and opens up a new dimension of performance. Take your vehicle to the next level with the Competition high-performance intercooler. Experience impressive cooling performance, improved power delivery and outstanding reliability every time you drive. Advantages:- Improved cooling properties- 134% larger inflow area- 105% more charge air volume- Intercooler inlet Ø62mm and intercooler outlet Ø67 mm- Plug & Play Dimensions original intercooler:720mm x 145mm x 80mmV=8.35 litersA=1044 cm² Wagner Tuning intercooler dimensions:550mm x 445mm x 70mmV=17.13 litersA=2447 cm² Scope of delivery:1 intercooler (black coated)1 silicone hose (black)1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.

The Wagner Tuning Competition intercooler kit is suitable for:Audi A6 C8 55TFSI 250KW/340hp (2019+)Audi A7 C8 55TFSI 250KW/340hp (2019+) Experience an impressive increase in performance and optimum cooling with the Competition high-performance intercooler. With mesh dimensions of 550mm x 445mm x 70mm and a total volume of 17,130cm³, this intercooler offers a massive 134% larger flow area and an impressive 105% more charge air volume compared to the standard intercooler. The high-quality Tube Fin mesh with internal turbulators ensures efficient cooling and maximum performance. Despite its imposing size, the intercooler impresses with a total weight of just 9.5 kg. The cast aluminium end boxes were optimized using flow analyses in the CFD system to ensure optimum air flow. The result is outstanding cooling properties with minimal back pressure, keeping your engine running at full speed. Each of our intercoolers is also coated with a high-quality anti-corrosion coating to ensure a long-lasting and optimal cooling effect. Installation of this completely ready-to-fit kit is a breeze. Simply replace the standard intercooler with the Competition high-performance intercooler - plug-and-play. The intercooler has been tested up to 6 bar and is absolutely pressure-stable. The quality of our products is our top priority, which is why all our products are subject to constant quality monitoring. This intercooler is also perfect for racing and will inspire you with its performance. Get your vehicle ready for the next level of performance with the Competition high-performance intercooler. Get the advantage of efficient cooling and an impressive increase in performance! The advantages at a glance:- Improved cooling performance- 32% larger inflow area- 279% more mesh volume- 26% less back pressure- Plug and play Dimensions original intercooler:720mm x 145mm x 80mmV=8.35 litersA=1044 cm² Wagner Tuning intercooler dimensions:550mm x 445mm x 70mmV=17.13 litersA=2447 cm² Scope of delivery:1 intercooler (black coated)1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.

The Wagner Tuning Competition intercooler fits the following vehicle:Audi RS6 C8Audi RS7 C8 Experience unsurpassed performance with our high-performance intercoolers! Get ready for a power upgrade that will take your engine to a new level. Our high-performance intercoolers offer outstanding features and ensure optimum cooling and a noticeable increase in performance. With generous mesh dimensions of 2 x [265mm x 340mm x 105mm], our intercoolers offer a whopping 41% more charge air volume compared to the original intercoolers. Thanks to our special competition high-performance mesh, you can enjoy superior cooling performance that meets even the most demanding requirements. And all this at a feather-light weight of just 6.5 kg per intercooler. Our unique intercooler kit intercooler with free-form cast aluminum end boxes developed using the latest CAD technology. This allows for optimal internal airflow, which contributes to maximum performance. These intercoolers are also impressively pressure resistant, withstanding pressures of up to 6 bar (tested). The kit includes 2 matching carbon air ducts for optimum airflow to the intercooler. To ensure a long-lasting cooling effect, all our intercoolers are equipped with a high-quality anti-corrosion coating, which also enables efficient heat dissipation. The result: optimum cooling and a significant increase in performance for your engine.our complete kit is fully ready to install and allows easy replacement of the standard intercooler. Enjoy the benefits of our high-performance intercooler without having to carry out complex modifications. Quality is our top priority, which is why all our products are subject to continuous quality monitoring. Incidentally, our high-performance intercoolers are also suitable for racing, for anyone looking for the ultimate driving experience. Please note that adjustment work is required for vehicles with auxiliary heating to ensure an optimum fit. Rev up your engine and experience the power explosion with our high performance intercoolers. Get it now and take pole position! Advantages of the Wagner Tuning intercooler:- improved cooling performance- 41% more charge air volume- 6.5kg per intercooler- 2 carbon air ducts- Optimum air flow- Plug & Play Mains OEM intercooler:V = 13.4 LA = 1490 cm² Mains Wagner Tuning intercooler:V = 18.9 L (+41%)A = 1802 cm² (+21%) Scope of delivery:2 intercoolers2 carbon air ducts4 silicone hoses1 mounting material1 assembly instructionAttention: Not approved in the area of the StVZO.

The Wagner Tuning Competition intercooler kit is suitable for the following vehicles:Audi S6 C8 3.0TDI 257KW/349PS 07/2019-11/2020 (Avant/Limousine)Audi S6 C8 3.0TDI 253KW/344PS 11/2020- (Avant/Saloon)Audi S7 C8 3.0TDI 257KW/349PS 07/2019-11/2020Audi S7 C8 3.0TDI 253KW/344PS 11/2020- Unleash the full potential of your vehicle with the Wagner Tuning Competition high-performance intercooler. With its impressive technical data, this intercooler sets new standards in terms of performance and cooling. The Competition high-performance intercooler impresses with generous net dimensions of 550 mm x 445 mm x 70 mm, which corresponds to a total volume of 17,130 cm³. Thanks to this impressive size, it offers a 134% larger inflow area and a 105% higher charge air volume compared to the standard intercooler. The high-quality Tube-Fin mesh with internal turbulators ensures optimum air flow and maximum cooling performance. Despite its impressive dimensions, the total weight of the intercooler is just 9.5 kg, which saves weight and improves vehicle dynamics. The cast aluminium end boxes of the charge air cooler were optimised with the help of flow analyses in the CFD system in order to achieve outstanding cooling performance with minimum back pressure. The connection diameters at the charge air cooler inlet are Ø62 mm and at the charge air cooler outlet Ø67 mm to ensure optimum flow efficiency. Another highlight is the anti-corrosion coating with excellent heat conduction properties, which is included with all our charge air coolers. This ensures permanent and optimum cooling with a significant increase in performance. The intercooler kit is completely ready to install and can be easily replaced with the standard intercooler - simply plug and play. It has been tested up to 6 bar and is pressure-stable, so you can rely on its reliability. Our products are subject to constant quality monitoring to ensure the highest standards. The Competition high-performance intercooler is specially designed for racing and opens up a new dimension of performance. Take your vehicle to the next level with the Competition high-performance intercooler. Experience impressive cooling performance, improved power delivery and outstanding reliability every time you drive. The advantages of the Wagner Tuning intercooler:- Significantly improved cooling performance- 134% larger inflow area- 105% increased charge air volume- More power and torque- Plug & Play- 100% pressure-resistant- Only 9.5kg Dimensions original intercooler:720mm x 145mm x 80mmV=8.35 litresA=1044 cm² Wagner Tuning intercooler dimensions:550mm x 445mm x 70mmV=17.13 litresA=2447 cm² Scope of delivery:1 intercooler (black coated)1 mounting material1 assembly instructions Attention: Not authorised in the area of the StVZO.

The competition water cooler kit is suitable for the following models:Audi RS6 C7 412KW/560hp 2013-2018Audi RS6 C7 Performance 445KW/605hp 2015-2018Audi RS7 C7 412KW/560hp 2013-2017Audi RS7 C7 Performance 445KW/605hp 2015-2017 Optimise the cooling performance of your Audi RS6 / RS7 C7 with our competition water cooler kit. The 4.0L V8 bi-turbo engine of the Audi RS6 and RS7 models is equipped with an indirect charge air cooling circuit. The charge air cooling process is therefore not realised with ambient air as usual, but with a separate cooling water circuit. A reduction in the cooling water temperature leads directly to an improved cooling performance of the charge air. This is where the advantages of our Wagner Tuning auxiliary water cooler come into play. Our newly developed competition racing mesh increases the radiator volume of the standard water cooler by an impressive 102%. The ratio between the inner and outer cooling surface ensures maximum heat transfer and at the same time allows sufficient airflow for neighbouring components such as the engine water cooler. The water coolers are also equipped with a thermally conductive anti-corrosion coating, which ensures a long-term cooling effect. Installation of the system is straightforward and plug-and-play thanks to our installation instructions. Prepare your Audi RS6 / RS7 C7 for maximum performance and optimise its cooling system with our competition water cooler kit. Attention: Not authorised in the area of the StVZO.

The competition water cooler kit is suitable for the following models:Audi S6 C7 309-331KW/420-450hp 2012-2018Audi S7 C7 309-331KW/420-450hp 2012-2018 Maximise the performance of your Audi S6 / S7 C7 with the Competition Water Cooler Kit from Wagner Tuning. The 4.0L V8 bi-turbo engine of the Audi S6 and S7 models is equipped with an innovative indirect charge air cooling circuit. In contrast to conventional systems, the charge air is not cooled with ambient air, but with its own cooling water circuit. The reduction of the cooling water temperature leads directly to an improved cooling performance of the charge air - and this is exactly where the Wagner Tuning additional water cooler kit comes in. Our newly developed competition racing mesh increases the radiator volume of the standard water cooler by an astonishing 92%. The unique ratio between the inner and outer cooling surface enables maximum heat transfer and ensures that neighbouring components receive sufficient airflow for their heat exchange. In addition, our water coolers are equipped with a thermally conductive anti-corrosion coating that ensures a long-term cooling effect. Installation of the system is simple and straightforward thanks to our detailed installation instructions. Enjoy the benefits of an improved cooling circuit and experience optimised performance from your Audi S6 / S7 C7. Ready to maximise your driving experience? Order the Competition Water Cooler Kit from Wagner Tuning today. Scope of delivery:1x additional water cooler incl. silicone hoses and mounting material Attention: Not authorised in the area of the StVZO.

Facts: Material: Carbon Manufacturer: Eventuri Made from prepreg carbon fibre and Kevlar - this engine cover is a direct replacement for the Audi C8 RS6 plastic engine cover. Available in gloss and matte finish. Compatible vehicles:VehicleTypePower outputEngine capacityEngineYear of construction Audi A6 (C8/4A)RS6 quattro441kW / 600hp463kW / 630hp3996cm³DJPB, DWLA, DYGBDYGA09.19 -01.23 - 10.23 Audi A7 (C8/4K)RS7 quattro441kW / 600hp463kW / 630hp3996cm³DJPB, DWLA, DYGBDYGA10.19 -01.23 -

Facts: Material: Carbon Manufacturer: Eventuri Expertise: without Eventuri Carbon Inlet for Audi C8 RS6/RS7 Intake for TTE888/1020 Upgrade Turbo Compatible vehicles:VehicleVehicle typePower outputDisplacementEngineYear of construction Audi A6 (C8/4A)RS6 quattro441kW / 600PS3996cm³DJPB, DWLA, DYGB09.19 - Audi A7 (C8/4K)RS7 quattro441kW / 600PS3996cm³DJPB, DWLA, DYGB09.19 -

Facts:Performance increase - Stage 1 : 45-50hp, 49ft-lbsStage 1 Acceleration 100-200Km/h : Shortening by 0.6sPerformance increase - Stage 2 : 60-80hp, 60-70ft-lbsMaterial: CarbonManufacturer: EventuriExpert opinion: without The Audi C8 RS6 intake system is the result of extensive development, testing and prototyping. Our goal was to fulfill 2 main criteria:1) Increased flow rate.2) Uniform airflow.The first objective was achieved by utilizing the limited space in the engine bay of the RS6, which was severely restricted by the underside of the hood. Our solution was to completely redesign the entire airbox, maximizing the volume, increasing the airflow inlets and creating a more favorable filter angle to the turbos. We also dramatically enlarged the turbo inlets by up to 85% when measuring the cross-sectional area at the openings. The second objective was achieved by designing an organically shaped system with a specially rounded plate filter to ensure that the airflow path did not contain any sharp corners and therefore the flow remained laminar. With smooth transitions from the filter to the turbo inlets, our intake system minimizes the formation of turbulence, allowing the turbos to work more efficiently. Working with BMC, we have developed a bespoke filter element to ensure that the filter area is as large as possible while keeping the airflow clean.When all targets are met, our C8 RS6 intake system delivers on all fronts and allows the turbos to generate boost pressure more efficiently. This results in improved throttle response and significant power gains, which have been independently tested and increase with higher tuning levels. The measured power gains are a result of the complete system we have developed from the airbox base to the cover to the inlets. Dyno testsOur intake system has been independently tested both on the dyno and on the road. At higher tuning levels, the turbos require more air and so the standard airbox becomes a greater restriction. Here are some results from renowned tuners who have tested the intake system. STAGE 1 TESTSDyno tests were carried out by Awesome GTI in the UK on their own C8 RS6 fitted with an OPF exhaust and their own Stage 1 remap. The car was run 4 times in 4th gear with the stock airbox and then switched to the Eventuri whilst the car remained on the dyno. The car was then driven again 4 times in 4th gear. The tests were all carried out on the same day and no other changes were made. The graph below shows the highest power with the stock airbox compared to the highest power with the Eventuri intake. In both cases, these are the first dyno runs, with performance decreasing on subsequent dyno runs due to heat build-up. As can be seen below, the intake offers a significant increase in power across the entire rev range. The highlighted point shows the highest power increase in the 60 hp rpm range at the crankshaft. The resulting power increases are noticeable on the road, with better throttle response and improved acceleration times. STAGE 2 TESTSThe dyno tests on a Stage 2 RS6 were conducted by Eurocharged Canada on a car with aftermarket downpipes, intercoolers and their own Stage 2 remap. The values shown here are measured at the steering wheel. The car was run several times with the stock airbox and the Eventuri. The resulting figures are shown below after comparing the best stock and best Eventuri results. Again, we see a dramatic increase in performance and as this is stage 2, the stock airbox is an even bigger restriction. The highlighted dot shows the highest gain in the rev range of 79hp at the wheels. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Audi A6 (C8/4A)RS6 quattro441kW / 600hp463kW / 630hp3996cm³DJPB, DWLA, DYGBDYGA09.19 -01.23 - 10.23 Audi A7 (C8/4K)RS7 quattro441kW / 600hp463kW / 630hp3996cm³DJPB, DWLA, DYGBDYGA10.19 -01.23 -

Facts: Performance increase with up to 15 hp Material: Carbon Manufacturer: Eventuri Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) Big cars - big intakes. With the intake system for the Audi RS6/RS7 C7, Eventuri sets new standards in precision and efficiency not only for itself but for the industry. Thanks to the two patented Eventuri air filters, the air flow is channelled laminar and without turbulence directly into the turbos. In addition to the rich sound of the intake, the Audi RS6/RS7 C7 intake comes with a significant increase in performance of up to 15 hp. The two-part, large heat shield ensures optimum shielding of the air flow from the engine heat. The heat shield cools itself through a small air slot between the insulating plates. The ingenious, fluid processing of the scoop for the air intake and the seamless transition into the patented Eventuri housing made of full carbon fibre ensure an individual and captivating look. The Eventuri intake for the Audi RS6/RS7 C7 comes in the following components: Carbon filter housing with integrated inlet pipe 2 efficient high-flow cones with urethane filter Carbon scoop Carbon filter cover CNC milled mount for the mass air flow sensor 2-piece main heat shield Laser-cut suspension The well-known Venturi effect is enhanced by Eventuri's technically ingenious product design. The alignment of the airflow through the elegant scoop creates a suction as it enters the filter housing through the filter, which compresses the airflow perfectly and directs it into the turbo. The optimised airflow then ensures a significant uplift in engine performance. Parts certificate The manufacturer's specifications apply to installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT Audi RS6 (4G) e1*2007/46*0544*.. DE/AT Audi RS7 (4G) e1*2007/46*0544*.. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Audi A6 (C7)RS6 quattro412kW / 560hp3993cm³CRDB, CWUB01.13 - 09.18 Audi A6 (C7)RS6 performance quattro445kW / 605hp3993cm³CWUC11.15 - 09.18 Audi A7 (4G)RS7 quattro412kW / 560hp3993cm³CRDB, CWUB10.13 - 04.18 Audi A7 (4G)RS7 performance quattro445kW / 605hp3993cm³CWUC11.15 - 04.18

KW coilover springs The spring set with stepless lowering KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active. Setup - sporty and harmonious spring rates The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range. Stepless lowering Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles. Please note the conditions and instructions for this product: - Not for vehicles with level control / air suspension - VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers) Technical information: Lowering VA/HA (mm): 5-30/15-40 Adjustment HA: Thread Approval: Parts certificate (§19.3) Scope of delivery: Set (VA+HA) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A6 Avant (4G) 4G5, 4GD, C7 05/2011-09/2018 RS6 performance quattro Kombi Petrol 445 KW 3993 ccm 8 All-wheel drive AUDI A6 Avant (4G) 4G5, 4GD, C7 05/2011-09/2018 RS6 quattro Estate Petrol 412 KW 3993 ccm 8 All-wheel drive AUDI A7 Sportback (4G) 4GA, 4GF 07/2010-05/2018 RS7 performance quattro Hatchback Petrol 445 KW 3993 ccm 8 All-wheel drive AUDI A7 Sportback (4G) 4GA, 4GF 07/2010-05/2018 RS7 quattro Hatchback Petrol 412 KW 3993 ccm 8 All-wheel drive

KW coilover springs The spring set with stepless lowering KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active. Setup - sporty and harmonious spring rates The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range. Stepless lowering Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles. Please note the conditions and instructions for this product: - Only for vehicles with electronic damper control - VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers) Technical information: Lowering VA/HA (mm): 5-30/5-30 Adjustment HA: Thread Approval: Parts certificate (§19.3) Scope of delivery: Set VA + HA Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A6 Avant (F2) C8, 4A5 05/2018- RS6 Mild Hybrid quattro Combi Petrol/Electric 441 KW 3996 ccm 8 All-wheel AUDI A6 Avant (F2) C8, 4A5 05/2018- RS6 Mild Hybrid quattro estate petrol/electric 463 KW 3996 ccm 8 all-wheel drive AUDI A7 Sportback (F2) 4KA 10/2017- RS7 Mild Hybrid quattro hatchback petrol/electric 441 KW 3996 ccm 8 all-wheel drive AUDI A7 Sportback (F2) 4KA 10/2017- RS7 Mild Hybrid quattro hatchback petrol/electric 463 KW 3996 ccm 8 all-wheel drive

KW V3 levelling You can't see it - you can FEEL IT!The KW levelling suspensions are ideal for drivers who are not looking for maximum lowering, but are looking for the driving dynamics and driving comfort of a KW coilover suspension in combination with the almost original standard ground clearance. The KW V3 Levelling focuses on the combination of increased driving dynamics and driving comfort in conjunction with a minimum lowering or, if desired, raising. The KW V3 Leveling is the ideal retrofit suspension for frequent drivers on poorly developed secondary roads or drivers who mainly use their car in metropolises and urban areas with numerous speed bumps. The progressive suspension springs are clearly designed for increased ride comfort. Accordingly, the KW V3 levelling has an adjustable, comfort-oriented basic damper tuning. If required, the KW levelling enables an adapted level regulation in the range of + 5 - 20 mm. The KW V3 Levelling is the ideal retrofit option for drivers who attach great importance to suitability for everyday use, increased ride comfort and a plus in sportiness. The separately adjustable dampers in compression and rebound with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to influence the turn-in behaviour, directional stability, tyre grip and handling characteristics significantly for safe controllability at the limit and increased ride comfort. - Freely adjustable damping technology in rebound and compression damping- inox-line stainless steel technology- Individual stepless levelling adjustment- Tested adjustment range- high-quality components for a long service life- Adjustable rebound damping with 16 precise clicks- 12-way adjustable compression damping with click adjustment- Unique, independently acting damping force adjustment Please note the conditions and instructions for this product:- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper)- Electronic damper control must be deactivated. The electronic kit for decommissioning is optionally included in the scope of delivery, depending on the selection.- Dampers have easy-to-operate adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible. Technical information:Level change (mm) between: VA -10 and +5 / HA -5 and +10Version: V3 levellingHardness adjustment: Rebound and compression stageMaterial: Stainless steelAdjustment VA/HA: thread/threadApproval: Parts certificate (§19.3) Compatible vehicles:Manufacturer Model Version Body Fuel Performance Displacement Cylinder DriveAUDI A4 Avant (B8) 8K5 11/2007-12/2015 RS4 quattro estate petrol 331 KW 4163 ccm 8 all-wheel drive

KW V4 coilover suspension incl. support bearings - State of the Art With the new KW V4 with its coilover struts made of stainless steel or aluminum, you give your super sports car the necessary reserves to further increase the driving dynamics. The three-way adjustable high-performance dampers with their independent adjustment of the rebound as well as low-speed and high-speed compression damping are based on the successful racing technology of the multiple overall winner of the ADAC Zurich 24h Race Nürburgring and, depending on the vehicle-specific version, have aluminum support bearings. The new KW V4 is developed exclusively for selected high-performance vehicles, which can be moved more safely at the limits of driving dynamics thanks to our KW suspension technology. - 3-way adjustable high-performance dampers with stainless steel coilover struts - Separate and independent damper adjustment in: - Rebound damping with 16 exact clicks + (firmer) / - (more comfortable) - Low-speed compression damping with 6 exact clicks + (firmer) / - (more comfortable) - High-speed compression damping with 14 exact clicks + (firmer) / - (more comfortable) - Two basic settings ex works with comfort setting and performance setting - Depending on the vehicle, aluminum support bearings are an integral part of the scope of delivery Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) - Not for vehicles with level control / air suspension - Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted if the piston rod is accessible. - Electronic damper control must be deactivated. Electronic kit for decommissioning is included in the scope of delivery. Technical information: Lowering VA/HA (mm): 10-35/10-35 Design: V4 Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A6 Avant (4G) 4G5, 4GD, C7 05/2011-09/2018 RS6 performance quattro Kombi Petrol 445 KW 3993 ccm 8 All-wheel AUDI A6 Avant (4G) 4G5, 4GD, C7 05/2011-09/2018 RS6 quattro estate Petrol 412 KW 3993 ccm 8 All-wheel drive AUDI A7 Sportback (4G) 4GA, 4GF 07/2010-05/2018 RS7 performance quattro hatchback Petrol 445 KW 3993 ccm 8 All-wheel drive AUDI A7 Sportback (4G) 4GA, 4GF 07/2010-05/2018 RS7 quattro hatchback Petrol 412 KW 3993 ccm 8 All-wheel drive For vehicles with DRC

KW V4 coilover suspension incl. support bearings - State of the Art With the new KW V4 with its coilover struts made of stainless steel or aluminum, you give your super sports car the necessary reserves to further increase the driving dynamics. The three-way adjustable high-performance dampers with their independent adjustment of the rebound as well as low-speed and high-speed compression damping are based on the successful racing technology of the multiple overall winner of the ADAC Zurich 24h Race Nürburgring and, depending on the vehicle-specific version, have aluminum support bearings. The new KW V4 is developed exclusively for selected high-performance vehicles, which can be moved more safely at the limits of driving dynamics thanks to our KW suspension technology. - 3-way adjustable high-performance dampers with stainless steel coilover struts - Separate and independent damper adjustment in: - Rebound damping with 16 exact clicks + (firmer) / - (more comfortable) - Low-speed compression damping with 6 exact clicks + (firmer) / - (more comfortable) - High-speed compression damping with 14 exact clicks + (firmer) / - (more comfortable) - Two basic settings ex works with comfort setting and performance setting - Depending on the vehicle, aluminum support bearings are an integral part of the scope of delivery Please note the conditions and instructions for this product: - VA + HA height adjustable (VA coilover struts, HA springs with height adjustment + damper) - Not for vehicles with level control / air suspension - Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted if the piston rod is accessible. - Electronic damper control must be deactivated. Electronic kit for decommissioning is included in the scope of delivery. - Variant 4 / Variant 5 Suspension struts / dampers made of aluminum or combined on each axle made of aluminum and stainless steel Technical information: Lowering VA/HA (mm): 10-35/10-40 Design: V4 Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A6 Avant (F2) C8, 4A5 05/2018- RS6 Mild Hybrid quattro Combi Petrol/Electric 441 KW 3996 ccm 8 All-wheel AUDI A6 Avant (F2) C8, 4A5 05/2018- RS6 Mild Hybrid quattro estate petrol/electric 463 KW 3996 ccm 8 all-wheel drive AUDI A7 Sportback (F2) 4KA 10/2017- RS7 Mild Hybrid quattro hatchback petrol/electric 441 KW 3996 ccm 8 all-wheel drive AUDI A7 Sportback (F2) 4KA 10/2017- RS7 Mild Hybrid quattro hatchback petrol/electric 463 KW 3996 ccm 8 all-wheel drive

The Wagner Tuning Performance intercooler kit fits the following models:Audi S6 C7 309-331KW/420-450hp 2012-2018Audi RS6 C7 412KW/560hp 2013-2018Audi RS6 C7 Performance 445KW/605hp 2015-2018Audi S7 C7 309-331KW/420-450hp 2012-2018Audi RS7 C7 412KW/560hp 2013-2017Audi RS7 C7 Performance 445KW/605hp 2015-2017 Enrich your driving experience with the innovative Wagner Tuning Performance intercooler for the Audi RS6/ RS7 and Audi S6/ S7 models with the powerful 4.0L V8 bi-turbo engine. Immerse yourself in a world of maximum power and impressive performance. The Audi RS6/ RS7 and Audi S6/ S7 have an indirect charge air cooling circuit in which the charge air is cooled by a water-cooled charge air cooler. In this vehicle, the intercooler is located specifically in the hot V of the engine. An upgrade of the OEM intercooler is necessary to ensure optimum cooling in the long term. Our unique Wagner Tuning Performance intercooler was specially developed for the demanding requirements of the RS models. The high-quality cooling network offers an additional 118 % more external network volume compared to the intercooler fitted as standard. The ratio between the inner and outer cooling surface ensures maximum heat transfer and at the same time optimises the internal air flow. CFD simulations were used to develop the end boxes from high-quality aluminium chill casting in order to ensure optimum air flow conditions. The result is outstanding cooling properties with minimal back pressure. This kit is therefore also ideally suited for racing. Experience optimum cooling of the supercharged air with a significant increase in performance! Our Wagner Tuning intercoolers are equipped with a thermally conductive anti-corrosion coating to ensure long-lasting durability. Installation of the complete kit is straightforward and plug-and-play thanks to our simple installation instructions. Benefit from the numerous advantages of this product:- Significantly improved cooling performance with up to 40°C cooler intake air temperatures- Maximum mechanical and thermal relief for the turbocharger- More power and torque for your engine- 100% pressure resistance- 100% plug-and-play without modifications- 4x 1/8 NPT connections for measuring additional parameters- Suitable for all power levels Treat yourself to the ultimate performance boost for your Audi RS6/ RS7 and Audi S6/ S7 and enjoy a driving experience that will thrill you. Opt for the Wagner Tuning Performance intercooler and take your vehicle to a new level of performance and dynamics. Attention: Not authorised in the area of the StVZO.

The Wagner tuning silicone hose kit is suitable for:Audi A6 4G (Allroad) 3,0 BiTDI 230KW/313hp 2011-2014Audi A6 4G (Allroad) 3,0 BiTDI 235-240KW/320-326hp 2014-Audi A7 4G 3.0 BiTDI 230KW/313hp 2011-2014Audi A7 4G 3,0 BiTDI 235-240KW/320-326hp 2014- Boost the performance and improve the reliability of your Audi A6 or A7 4G 3.0 BiTDI with our high quality silicone hose kit. Designed to meet the demands of discerning drivers, this kit offers optimum fit and performance in conjunction with our original intercooler. Precision Manufactured Hoses: Each silicone hose kit has been precision manufactured to ensure a perfect fit and easy installation. The included hose clamps ensure a secure and reliable connection. High quality materials: Made from high quality silicone that offers high temperature resistance and durability. These hoses are designed to withstand the stresses of the engine and ensure optimum performance. Compatibility:This silicone hose kit is exclusively compatible with our original intercooler, allowing for seamless integration and improved airflow dynamics. Improved performance: The improved airflow optimizes the airflow, resulting in increased power and improved engine response. Stylish design: In addition to their functionality, the silicone hoses also offer an attractive design that enhances the appearance of your Audi A6 or A7 4G 3.0 BiTDI. Attention: This hose kit is only compatible with the original Wagner Tuning intercooler. Scope of delivery:2 charge air hoses4 hose clamps Note: Please note that the article image is for illustrative purposes only and the actual shape of the kit may differ slightly.

We present the CSF upgrade intercooler, a real highlight for every Audi C8 RS6/RS7 owner. The product not only scores with quality, but also with visual appeal. Our CSF upgrade intercooler comes in a polished finish, which gives your engine compartment a particularly elegant look. Manufactured by the expert brand CSF, this intercooler promises maximum performance and optimum cooling efficiency. Installation is extremely straightforward, as this intercooler is interchangeable like the original part. No additional adjustments or modifications are required for installation, so you can enjoy improved performance and stability in no time. Made from high-quality aluminum, the CSF Upgrade intercooler promises high reliability and a long service life. Aluminum is known for its excellent heat dissipation and corrosion resistance, making this intercooler the perfect upgrade for your Audi C8 RS6/RS7. In summary, the CSF upgrade intercooler offers you an improvement in performance, efficiency and looks. Whether you're upgrading your vehicle for the ultimate racing pleasure or simply want to spruce up the engine bay, this intercooler is the ideal solution. Give yourself and your Audi the upgrade it deserves. Features of the CSF high performance intercooler system for Audi C8 RS6/RS7:Eliminates heat build-up and lowers intake air temperatures (IATs) for maximum performance under high performance and racing conditionsStage 1 (standard tuning) +20 WHP / +18 WTQ*Stage 2 (with high-performance tuning) +10 WHP / +20 WTQ*Formula 1 Performance Grade Core from PWR (2-row core with rolled tubes and inner slats)CNC-milled billet end tanks100% TIG welded vs OEM style gasket and crimped end tanks for maximum durabilityOEM style intake/exhaust ports for precise fitment with all OEM componentsTrue plug-and-play “drop-in fit” installation requires absolutely no modificationsManufactured in the USA by PWR North America* Compared to OEM intercoolers with same day dyno testing by VF Engineering Bench testingIn-depth development processes and testing in collaboration with leading VAG tuning and supercharger specialist VF Engineering and Pacific German allowed us to refine the components of this premium vehicle as much as the vehicle itself. Compatible vehicles:AUDI A6 C8 Avant (4A5) RS6 Mild Hybrid quattro 2019-2023AUDI A7 Sportback (4KA) RS7 Mild Hybrid quattro since 2019