Engine cover Carbon | fits Honda Civic Gen.9 Type-R (FK2) 310hp | Eventuri

Facts:Power increase: 24-30 hp, 28-35 ft-lbBrand: EventuriMaterial: CarbonParts certificate: A certificate is available for this product for certain regions and vehicles (details below) The FK2 Type R V2 intake is an updated version of our original FK2 system that now replaces the stock rubber intake tube with our carbon tube and a custom silicone hose. The new carbon tube also includes the MAF sensor and therefore also replaces our original MAF metal tube from the original Eventuri system. The addition of the carbon tube smooths the path from the venturi filter housing to the stock turbo inlet tube and the difference is significant in terms of additional power gained. The rest of the intake remains the same, with our cold air scoop and venturi filter housing ensuring smooth airflow and low intake temperatures. By incorporating an effective cold air intake, which the stock system lacks, and coupling it with our patented venturi housing and carbon intake tube, our intake delivers industry-leading results consistently. The Eventuri differenceThe FK2 Type R V2 Eventuri system uses our patented carbon fiber housing with our custom Gen 2 filter that provides an aerodynamically efficient airflow path from the filter to the turbos. Not just another cone filter with a heat shield, but a unique design that creates the Venturi effect and maintains laminar flow conditions to reduce drag on the turbo. Each component has been designed for a specific purpose and to a very high standard. Each Eventuri FK2 V2 kit consists of:Patented carbon fiber intake housingAnodized aluminum intake coverTailor-made generation 2 high-flow filterCarbon intake tube with integrated MAF sensor holderCustomized silicone hose with vent outletsCarbon cold air duct with water drainOEM windshield pre-cut for the ductMounting bracket made from laser-cut stainless steelHigh-quality silicone coupling with hose clamps according to OEM specification Parts certificateThe manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles:* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24Country Model Type approval*DE/AT Honda Civic e11*xx/xx*0256*.. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Honda Civic (FK2)Type-R228kW / 310hp1996cm³K20C108.15 - 12.16

Material: Carbon Manufacturer: Eventuri Expertise: Parts certificate The long awaited upgrade for the Eventuri carbon intake system for the Honda Civic FK2 Type-R! The new addition to the Eventuri portfolio is a 1 to 1 replacement of the OEM LMM pipe with a perfectly crafted full carbon fibre LMM pipe. The improved flow characteristics and the optimised shielding from engine heat thanks to the Prepeg carbon make this small upgrade an improvement, and not just visually. In road tests, 12 hp more power was measured over and above the additional power already delivered by the Eventuri Intake! Compatible vehicles: VehicleTypePower outputDisplacementEngineYear of construction Honda Civic (FK2)Type-R228kW / 310PS1996ccK20C108.15 - 12.16

Facts: +30 hp on the Dyno Stage 3 Civic FK2 Type-R Brand: Eventuri Material: Carbon fibre Installation: like original part (exchange) Expertise: without By now it is clear that Eventuri is not your next run-of-the-mill company, but has a special goal with extraordinary products. The design of the new turbo tubes for the Civic FK2 and FK8 makes this clear once again. Small part, big effect: +30 hp on the Dyno Stage 3 Civic FK8 Type-R Naturally full carbon fibre Perfect fit Both the Eventuri Honda Civic FK2 Type-R Intake and the FK8 Type-R Intake were available in 2 versions. In both cases, the turbo pipe ONLY fits the new variants (V2) of the intakes. This means that for all customers with old (V1) intakes, the LMM pipe upgrade must first be purchased. Eventuri offers two variants for both pipes (FK2 and FK8): For V1 and V2 customers respectively. Eventuri Turbo Tube for Honda Civic FK2 Type-R The turbo tube for the FK8 is available in 2 variants and only fits the Eventuri Intake. Variant 1: Customers with the old V1 Intake (old carbon LMM tube) Scope of delivery: - Carbon Turbo Tube - CNC turbo flanges - FK2 specific silicone tube - FK2 V2 carbon LMM tube Variant 2: Customers with the new V2 Intake (with new carbon LMM tube) Scope of delivery: - Carbon Turbo Tube - CNC turbo flanges - FK2 specific silicone tubeCompatible vehicles: VehicleTypepowerengine capacityEngineYear of construction Honda Civic (FK2)Type-R228kW / 310PS1996ccK20C108.15 - 12.16

The Eventuri Carbon Side Panel for Honda Civic FK2 Type R is made entirely of carbon fiber and is sure to attract envious glances when you look under the hood.Especially in combination with the intake system and the engine cover, the side panel makes the engine compartment of the Civic shine in new splendor.The engine cover is not included in the scope of delivery, but can be ordered separately. Expert opinion: Material certificate Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Honda Civic (FK2)Type-R228kW / 310hp1996cm³K20C108.15 - 12.16

The report includes the increase in rated power to 300kW (408hp).Note: Price errors/errors/changes reserved! Some vehicles require an additional OBD unlock. We will be happy to check this in advance using the chassis number.The purchase of the performance upgrade does not include registration in the vehicle documents. This must be purchased separately.To get the maximum performance from your vehicle, we recommend filling up with premium fuel (100/102 octane) before and after the optimisation.Compatible vehicles:VehicleTypePower outputEngine capacityEngineYear of construction BMW 2 Series (F87)M2272kW / 370hp2979ccN55 B30 A11.15 - 06.18

Transform your F97 into a high-performance powerhouse with the BlackBoost cooling air intake system. Experience more power, style and driving dynamics with this premium upgrade. In the world of performance modifications, the airbox is one of the most important engine components you should upgrade. The factory airbox is very restrictive in terms of airflow and filter area. Our cooling air intakes are designed and engineered to overcome these factory restrictions and deliver the maximum airflow with the lowest possible temperatures given the space available. The BlackBoost Cold Air Intakes are designed to be flush with the bonnet of the vehicle and ensure a consistent seal with the rubber seals of the airbox, whilst also ensuring a large surface area to work properly. The BlackBoost twin-flow filters are specifically designed to maximise airflow and surface area. The BlackBoost intake kit is a plug-and-play solution that works perfectly without further customisation and requires no additional software tuning. It also works smoothly in combination with turbo upgrades, downpipes, methanol injections etc. to unleash the necessary airflow and utilise the full capacity of the engine for those aiming for 1000+ WHP figures.Key Features:- Proven power increase from 8 to 30+ hp on production vehicles- Improved responsiveness across the entire rev range- Optimised airflow and increased volume range compared to standard equipment- Increased surface area of the filter elements- Can support airflow for 1000+ WHP configurations- Larger filter element surface area compared to OEM- Plug-and-play bolt-on installation- No ECU tuning required Compatible vehicles:BMW X3M (F97) 353kW | 480HP | 2993cm³ | S58BMW X3M (F97) Competition | 375kW | 510HP | 2993cm³ | S58 Attention: The intake can only be used in combination with the approved 670hp Stage and must be installed in an open configuration! The intake itself is not approved. Only with in-house installation!

The 3DDesign carbon front lip for the F87 provides an even more aggressive look at the front of the vehicle in no time at all. The lip is made of carbon fibre/GRP and is not just visually impressive: it also increases the downforce on the front axle.Compatible vehicles:BMW 2 Coupe (F22, F87) M2 2015-2018

Facts:- Plug & Play installation using illustrated installation instructions- Special wiring harness for your vehicle- High-quality electronics “Made In Germany”- Electronic components with product qualification for motor vehicles according to AEC-Q100 installed- Support from us as co-developer and manufacturer Scope of delivery:The scope of delivery includes the motorsport add-on module, an engine-specific wiring harness, illustrated installation instructions in DE/EN and a BYPASS connector, which you can use to restore your vehicle to series production. Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeYear of constructionBMW 8er (F91/F92/F93)M8 441kW / 600hp4395cm³S63 B44 B07.19 - BMW 8er (F91/F92/F93)M8 Competition460kW / 625hp4395cm³S63 B44 B07.19 - LEGAL INFORMATION: THE INSTALLATION OF ADDITIONAL ELECTRONICS IS A STRUCTURAL MODIFICATION TO THE MANUFACTURER'S ELECTRONICS. WITHOUT REGISTRATION IN THE VEHICLE DOCUMENTS BY MEANS OF AN INDIVIDUAL CERTIFICATE FROM TÜV; DEKRA OR OTHER RECOGNIZED TESTING INSTITUTES, THE INSTALLATION WILL INVALIDATE THE OPERATING LICENSE. IF USED ON PUBLIC ROADS, THIS WILL RESULT IN THE LOSS OF INSURANCE COVER. WE DO NOT CURRENTLY HAVE A PARTS CERTIFICATE FOR YOUR VEHICLE. THEREFORE, THIS SYSTEM IS EXCLUSIVELY SUITABLE FOR MOTORSPORT. ATTENTION: IF YOU USE THE ADDITIONAL ELECTRONICS, YOU MAY LOSE YOUR WARRANTY CLAIMS AGAINST THE SELLER OR WARRANTY CLAIMS AGAINST THE MANUFACTURER. IF YOU HAVE ANY FURTHER QUESTIONS, PLEASE DO NOT HESITATE TO CONTACT US!

The Wagner Tuning Competition intercooler kit EVO 2 fits the following vehicles:Volkswagen T5.1 2,5TDI 96KW/131hp 2003-2009*Volkswagen T5.1 2,5TDI 128KW/174hp 2003-2009** Vehicles with MKB: AXB, AXC, AXD, AXE, BLJ, BRR, BRS require the Wagner Tuning silicone hose kit on the driver's side. Ready to take your vehicle to the next level of performance? Our Competition high performance intercooler is the solution for demanding drivers who want maximum performance and optimum cooling. With net dimensions of 670 mm x 302 mm x 75 mm (= 15,175 cm³), this intercooler offers an impressive 40% larger flow area and an incredible 229% more charge air volume compared to the standard cooler. This means that your engine receives more air, resulting in a noticeable increase in performance. The Competition high-performance mesh has been specially developed and offers outstanding cooling properties. It allows your engine to operate at the optimum temperature. Despite its impressive performance, this high-performance intercooler weighs just 8.9 kg. The free-form end boxes made of high-quality cast aluminum have been developed in the CAD system to ensure the best possible internal air flow. With integrated air baffles in the inlet, this intercooler ensures even filling to maximize performance. The original click connections have been eliminated and the connection diameters at the inlet and outlet have been increased to a generous Ø65 mm. Our kit includes two reinforced silicone hoses to ensure excellent cooling with minimal back pressure. All our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This ensures long-lasting and optimum cooling with a clear increase in performance. Installation is carried out at the original mounting points and is effortless. This intercooler is a 1:1 replacement that requires no complex modifications. Our products are subject to strict quality control procedures to ensure they meet the highest standards. Get ready to dominate the road and take your vehicle to a new level of performance. Our Competition high performance intercooler is the choice of champions. Order today and experience the power! Advantages of the Wagner Tuning intercooler:- improved cooling performance- 40% larger inflow area- 229% more charge air volume- Inlet and outlet extended to Ø65 mm- original mounting points (plug & play) OEM intercooler:Cooling surface 1440cm²charge air volume 4,6L Wagner Tuning intercooler:Cooling surface 2023cm²Charge air volume 15.2L Scope of delivery:1 intercooler2 silicone hoses1 aluminum adapter1 mounting material1 assembly instructionAttention: Not approved in the area of the StVZO.