Facts:
- replaces the main catalyst
- with 300 cell stainless steel sports catalyst
- Euro 6 compatible
- for current OPF models
- with Thermo-Integral insulation (for an extra charge)
- with ECE approval*
Compatible vehicles:VehicleVehicle typePower outputEngine capacityEngineYear of construction
BMW 5 Series (G30/G31)540i / xDrive250kW / 340PS2998cm³B58 B30 A, B58 B30 C09.16 - 07.19
BMW 5 Series (G30/G31)540i / xDrive265kW / 360PS2998ccB58 B30 A09.16 - 07.19
BMW 6 Series (G32)640i / xDrive250kW / 340hp2998cm³B58 B30 A, B58 B30 C06.17 - 07.19
BMW 6 Series (G32)640i / xDrive265kW / 360PS2998cm³B58 B30 A, B58 B30 C06.17 - 07.19
Note: Depending on the software version, the engine control light may light up. We recommend the purchase of an OFF set module or software customisation.
*This downpipe has ECE approval so that it can be used within the scope of the StVZO without registration in the vehicle documents.
Facts:
- 4.49“ (114mm) > 3” (76mm), replaces the main catalyst
- with 200 cell stainless steel sports catalyst
- Euro 6 compatible
- for current OPF models
- with Thermo-Integral insulation (for an extra charge)
- with ECE approval*
Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction
BMW 5 Series (G30/G31)540i / xDrive250kW / 340hp2998cm³B58 B30 A, B58 B30 C08.19 - 06.20
BMW 5 Series (G30/G31)540i / xDrive265kW / 360hp2998cm³B58 B30 A08.19 - 06.20
BMW 6 Series (G32)640i / xDrive250kW / 340hp2998cm³B58 B30 A, B58 B30 C08.19 - 06.20
BMW 6 Series (G32)640i / xDrive265kW / 360hp2998cm³B58 B30 A, B58 B30 C08.19 - 06.20
Note: Depending on the software version, the engine control light may come on. We recommend the purchase of an OFF set module or software customisation.
*This downpipe has ECE approval so that it can be used within the scope of the StVZO without registration in the vehicle documents.
MOVIT DDE steel brake system 380x32mm (6 piston calliper) for the front axle, from 19 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined.
The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications.
The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple layer of paint.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts
Attention: The conversion means that only rims with at least 19 inches can be fitted!
The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate.
MOVIT sports brake callipers, 6-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force
MOVIT sports brake discs, 380x32mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Highest fading resistance- Special alloy for high thermal conductivity
MOVIT comfort brake pads- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life
Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x assembly material1x installation instructions and running-in instructions1x parts certificate
Compatible vehicles:BMW 5 Series (E60) M5 373kW / 507PS / 4999cm³ / S85BMW 6 Series (E63) M6 373kW / 507PS / 4999cm³ / S85
Facts:
- 3 inch (76cm) Charge Pipe made of T-6061 aluminum in black
- incl. mounting rubbers, clamps
- replaces the BMW original part with the part number 13718601684
- Plug'n'Play installation
- without approval in the area of the StVZO
The aluminium charge pipe replaces the factory plastic pipe. In more powerful vehicles, the increased boost pressure can cause the original pipe to burst. In the worst case, this can lead to engine damage due to fragments being sucked in.
Compared to the original, the pressure pipe has an enlarged diameter of 76mm (3").This reduces air turbulence and at the same time increases the air flow. This allows the turbocharger to respond more quickly, which increases the maximum possible output. The engine control unit does not need to be retuned. Even at very high charge pressures, there is no risk of bursting with this pressure pipe.
The charge pipe also provides a good basis for retrofitting a water-methanol injection system; a connection for the injector is already prepared (thread for water-methanol injection: 1/8" inch, 21/64 fine thread).The charge pipe is fitted as a plug'n'play direct replacement for the standard part.
The charge pipe replaces the original part with the following part number: 13718601684
Compatible vehicles:BMW 1' F20 LCI (09/2015 - 08/2018) M140i / xDriveBMW 1' F21 LCI (09/2015 - 08/2018) M140i / xDriveBMW 2' F22 (09/2015 - 06/2017) M240i / xDriveBMW 2' F22 LCI (09/2016 - 08/2018) M240i / xDriveBMW 2' F23 (09/2015 - 06/2017) M240i / xDriveBMW 2' F23 LCI (10/2016 - 08/2018) M240i / xDriveBMW 3' F30 LCI (10/2014 - 09/2018) 340i / xDriveBMW 3' F31 LCI (10/2014 - 08/2018) 340i / xDriveBMW 3' F34 GT LCI (09/2015 - 07/2018) 340i / xDriveBMW 4' F32 (04/2015 - 02/2017) 440i / xDriveBMW 4' F32 LCI (05/2016 - 08/2018) 440i / xDriveBMW 4' F33 (03/2015 - 02/2017) 440i / xDriveBMW 4' F33 LCI (05/2016 - 08/2018) 440i / xDriveBMW 4' F36 Gran Coupé (03/2015 - 02/2017) 440i / xDriveBMW 4' F36 Gran Coupé LCI (05/2016 - 07/2018) 440i / xDriveBMW 5' G30 (10/2015 - 08/2018) 540i / xDriveBMW 5' G31 (03/2016 - 07/2018) 540i / xDriveBMW 5' G38 (02/2016 - 08/2018) 540i / xDriveBMW 6' G32 GT (09/2016 - 07/2018) 640i / xDriveBMW 7' G11 (10/2014 - 07/2018) 740i / xDriveBMW 7' G12 (10/2014 - 08/2018) 740i / xDriveBMW X3 G01 (10/2016 - 09/2018) xDrive M40iBMW X4 G02 (03/2017 - 08/2018) xDrive M40i
Attention: Not approved in the area of the StVZO.
The Competition intercooler kit is suitable for the following vehicles:BMW G30/G31 518d MKB: B47 110KW/150hp (2018+) *BMW G30/G31 520d MKB: B47 140KW/190hp (2017-2020) *BMW G30/G31 525d MKB: B47 170KW/231hp (2017-2019) *BMW G30/G31 530d MKB: B57 195-210KW/265-286hp (2017-07/2020) *BMW G30/G31 540d MKB: B57 235-250KW/320-340hp (2017-07/2020) *BMW G32 620d MKB: B47 140KW/190hp (2018-2020) *BMW G32 630d MKB: B57 195-210KW/265-286hp (2017-07/2020) *BMW G32 640d MKB: B57 235-250KW/320-340hp (2017-07/2020) *BMW G11/12 740d MKB: B57 235-250KW/320-340hp (2017-07/2020) *BMW G14/15/16 840d MKB: B57 235-250KW/320-340hp (2017-07/2020) **not suitable for facelift vehicles from 07/2020 and/or with XD5O engine
Optimize the performance of your vehicle with our Wagner Tuning Competition high-performance intercooler!
Do you want to unleash the full potential of your
vehicle? Our Competition high performance intercooler is the answer to your performance needs and offers:
Our intercooler sets new standards. With impressive mesh dimensions of 570 mm x 236 mm x 150 mm (stepped), it offers an astonishing 70% larger flow area and a significant 112% more charge air volume compared to the standard intercooler. This results in a noticeable increase in performance and a better overall driving experience.
Our high-performance mesh has been specially developed and is characterized by its quality. It consists of a Tube Fin mesh with internal turbulators, which ensures optimum air flow and heat dissipation.
Although our intercooler is large, it only weighs 10.5 kg. This means that you can increase the performance of your
vehicle
without increasing the weight, which has a positive effect on driving dynamics.
Thanks to extensive flow optimization in the CAD system, the cast aluminium end boxes of our intercooler ensure excellent cooling performance with minimal back pressure. This is crucial for an efficient increase in performance. All our intercoolers are equipped with an anti-corrosion coating that not only prevents rust, but also has heat conduction properties. This ensures long-lasting and optimum cooling, which in turn improves performance.
Our intercooler is supplied as a complete ready-to-install kit, allowing for easy replacement with the stock intercooler - plug-and-play. The use of the original charge air hoses is still possible. We subject all our products to strict quality control to ensure that you receive only the best.
It's time to take your
vehicles performance to the next level. With our Competition high performance intercooler, you can expect more power, better cooling and an overall improved driving experience. Experience the future of performance enhancement. Invest in quality and boost your
vehicles performance with our Competition High Performance Intercooler!
Advantages of the Wagner Tuning intercooler:- improved cooling performance- 70% larger inflow area- 112% more charge air volume- Optimized air flow- Minimal back pressure- Plug and Play
Dimensions original intercooler:545mm x 145mm x 96mmV=7.6 litersA=790 cm²
Wagner Tuning intercooler dimensions:570mm x 236mm x 150mm / steppedV=16.2 litersA=1345 cm²
Scope of delivery:1 intercooler (black coated)1 installation instructionAttention: Not approved in the area of the StVZO.
Includes the following services:- Remove and replace connecting rod bearings- Check and measure crankshaft journals- Check and adjust oil pump- Clean all parts- Wheel alignment- Change oil and filter- Including all parts such as bearings, screws, seals, oil filter and engine oil (10W60)- Entry with BMW company number stamp in the service booklet- 1 l oil refillIn addition and depending on requirements, we can also replace the spark plugs and engine bearings for an additional charge for the parts.
Note:This service can only be carried out at our company headquarters!
The 3DDesign carbon diffuser for the F06, F12 and F13 not only ensures an unmistakably sporty rear view of the vehicle. It also improves the downforce on the rear axle and thus the aerodynamics of the entire vehicle! Our premium partner 3DDesign is known as a perfectionist and stands for a high degree of individuality as well as the continuous further development of the product range.
This rear apron is supplied without the matching rear splitter.Incl. parts certificate
Compatible vehicles:BMW 6 Convertible (F12) M6 2012-2018BMW 6 Convertible (F12) M6 Competition 2013-2015BMW 6 Convertible (F12) M6 Competition 2015-2018BMW 6 Coupe (F13) M6 2012-2017BMW 6 Coupe (F13) M6 Competition 2013-2015BMW 6 Coupe (F13) M6 Competition 2015-2017BMW 6 Gran Coupe (F06) M6 2013-2018BMW 6 Gran Coupe (F06) M6 Competition 2013-2015BMW 6 Gran Coupe (F06) M6 Competition 2015-2018
The Vorsteiner carbon diffuser for the F06/F12/F13 improves the aerodynamics of the vehicle. Thanks to its uneven shape, it ensures pressure distribution at the rear and thus downforce.
Made from autoclaved prepreg carbon fibre.Expertise: Material certificate
Compatible vehicles:BMW 6 Convertible (F12) M6 2012-2018BMW 6 Convertible (F12) M6 Competition 2013-2015BMW 6 Convertible (F12) M6 Competition 2015-2018BMW 6 Coupe (F13) M6 2012-2017BMW 6 Coupe (F13) M6 Competition 2013-2015BMW 6 Coupe (F13) M6 Competition 2015-2017BMW 6 Gran Coupe (F06) M6 2013-2018BMW 6 Gran Coupe (F06) M6 Competition 2013-2015BMW 6 Gran Coupe (F06) M6 Competition 2015-2018
The 3DDesign carbon front lip for the F06/F12/F13 provides that certain something. Our premium partner 3DDesign is known as a perfectionist and stands for a high degree of individuality as well as the continuous further development of the product range. The front lip impresses with its brute sporty look.
Supplied without front splitter.
Incl. parts certificate
Compatible vehicles:BMW 6 Convertible (F12) M6 2012-2018BMW 6 Convertible (F12) M6 Competition 2013-2015BMW 6 Convertible (F12) M6 Competition 2015-2018BMW 6 Coupe (F13) M6 2012-2017BMW 6 Coupe (F13) M6 Competition 2013-2015BMW 6 Coupe (F13) M6 Competition 2015-2017BMW 6 Gran Coupe (F06) M6 2013-2018BMW 6 Gran Coupe (F06) M6 Competition 2013-2015BMW 6 Gran Coupe (F06) M6 Competition 2015-2018
The Vorsteiner carbon front lip add-on for the F12 provides more downforce on the front axle.
Made from autoclaved prepreg carbon.Expert opinion: Material certificate
Compatible vehicles:BMW 6 Convertible (F12) M6 2012-2018BMW 6 Convertible (F12) M6 Competition 2013-2015BMW 6 Convertible (F12) M6 Competition 2015-2018BMW 6 Coupe (F13) M6 2012-2017BMW 6 Coupe (F13) M6 Competition 2013-2015BMW 6 Coupe (F13) M6 Competition 2015-2017BMW 6 Gran Coupe (F06) M6 2013-2018BMW 6 Gran Coupe (F06) M6 Competition 2013-2015BMW 6 Gran Coupe (F06) M6 Competition 2015-2018
Facts:
Power increase of up to +15 hp
Material: Carbon
Manufacturer: Eventuri
Parts certificate: A certificate is available for this product for certain regions and vehicles (details below)
The Eventuri Carbon Intake System for the E60 and E63 is designed to increase engine performance, improve handling and enhance the overall driving experience.
The main aspects are the balance between aerodynamic efficiency and air intake temperature. An open system was chosen but with differences to other aftermarket airboxes. This can be recognised by the shape of the carbon housing and the position and shape of the air filter. The inverted cone-shaped filter, which is also encased in carbon fibre, creates the so-called Venturi effect.
The resulting uniform laminar airflow means that a power increase of +15 hp is realistic.
The airbox is manufactured using the prepreg carbon fibre process.
Parts certificate
The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle.
A certificate is available for this product for the following regions and vehicles:
* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24
Country Model Type approval*
DE/AT BMW M5 e1*2001/116*0297*..
DE/AT BMW M6 e1*2001/116*0297*..
Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction
BMW 5 Series (E60/E61)M5373kW / 507hp4999cm³S85 B50 A09.04 - 12.10
BMW 6 Series (E63/E64)M6373kW / 507hp4999cm³S85 B50 A09.05 - 08.10
Facts:more power, better response and a new sound experienceMaterial: CarbonManufacturer: EventuriParts certificate: A certificate is available for this product for certain regions and vehicles (details below)
The Eventuri Carbon Kevlar Intake System for F12/F13 is designed to increase engine performance, improve handling and enhance the overall driving experience. Using an inverted cone-shaped filter enclosed in a carbon/Kevlar housing, Eventuri utilizes the so-called Venturi effect. The result is an even laminar airflow, which not only provides more power but also better responsiveness and a new sound experience.
The airbox is manufactured using the pre-preg process.
The intake system is supplied complete with a parts certificate!
Parts certificateThe manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle.
A certificate is available for this product for the following regions and vehicles:* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24Country Model Type approval*DE/AT BMW M5 (F10) e1*xx/xx*0361*..DE/AT BMW M6 (F06) e1*xx/xx*0361*..DE/AT BMW M6 (F12) e1*xx/xx*0361*..DE/AT BMW M6 (F13) e1*xx/xx*0361*..
Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction
BMW 6er (F12/F13)M6412kW / 560hp4395cm³S63 B44 B03.12 - 06.18
Looking to add a little more kick to your interior? Look no further, because we've just released our replacement bright red M1/M2 buttons for select F-Series vehicles. These buttons are manufactured from precision ABS plastic and finished with a hardwearing, UV and scratch resistant clear coat to ensure a long life in everyday use.
Please note that this product is only suitable for M-series vehicles (see example image).
Compatible vehicles:BMW 2 Coupe (F22, F87) M2 2015-2018BMW 2 Coupe (F22, F87) M2 CS 2019-2021BMW 2 Coupe (F22, F87) M2 Competition 2018-2021BMW 3 (F30, F80) M3 2014-2018BMW 3 (F30, F80) M3 CS 2018-2018BMW 3 (F30, F80) M3 Competition 2016-2018BMW 4 Convertible (F33, F83) M4 2014-2020BMW 4 Convertible (F33, F83) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 2014-2020BMW 4 Coupe (F32, F82) M4 CS 2017-2019BMW 4 Coupe (F32, F82) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 GTS 2016-2019BMW 5 (F10) M5 2011-2016BMW 5 (F10) M5 30th Anniversary 2014-2016BMW 5 (F10) M5 Competition 2013-2016BMW 6 Convertible (F12) M6 2012-2018BMW 6 Convertible (F12) M6 Competition 2013-2015BMW 6 Convertible (F12) M6 Competition 2015-2018BMW 6 Coupe (F13) M6 2012-2017BMW 6 Coupe (F13) M6 Competition 2013-2015BMW 6 Coupe (F13) M6 Competition 2015-2017BMW 6 Gran Coupe (F06) M6 2013-2018BMW 6 Gran Coupe (F06) M6 Competition 2013-2015BMW 6 Gran Coupe (F06) M6 Competition 2015-2018
These PaddleShifterz aluminium paddle shifters fit the G-series steering wheel. They are a complete replacement for the OEM paddle shifters in your vehicle. They are finished in matt black and take the look of your vehicle interior to the next level.
Ergonomics was a key consideration during development, as the paddle shifters should not only look good, but also function as expected. They have been designed to work better than the OEM paddle shifters.
They are fitted as a direct replacement for the OEM paddle shifters. No additional adapters or mounting hardware are required.Simply remove the original part and insert the new paddle shifters - it's easy!
Scope of delivery:- 2x paddle shifters (left and right) in matt black (powder-coated)- Made from aluminium, CNC-milled
Compatible vehicles:BMW 1 Series (2019+, F40)BMW 2 Series (2020+, F44)BMW 3 Series (2018+, G20, G21)BMW 4 Series (2020+, G22, G23, G26)BMW 5 Series (2017+, G30, G31)BMW 7 Series (2015+, G11, G12)BMW 8 Series (2018+, G14, G15, G16)BMW M3/Competition (2021+, G80, G81)BMW M4/Competition (2021+, G82)BMW M5/M5/Competition (2017+, F90, F90 LCI)BMW M8 Competition (2018+, F91, F92, F93)BMW X3/X3M/Competition (2017+, G01, F97)BMW X4/X4M/Competition (2018+, G02, F98)BMW X5/X5M/Competition (2019+, G05, F95)BMW X6/X6M/Competition (2019+, G06, F96)BMW X7/X7M (2019+, G07)BMW Z4 G29Toyota Supra MK5
These PaddleShifterz aluminium paddle shifters fit the G-series steering wheel. They are a complete replacement for the OEM paddle shifters in your vehicle. They are finished in silver and take the look of your vehicle interior to the next level.
Ergonomics was a key consideration during development, as the paddle shifters should not only look good, but also function as expected. They have been designed to work better than the OEM paddle shifters.
They are fitted as a direct replacement for the OEM paddle shifters. No additional adapters or mounting hardware are required.Simply remove the original part and insert the new paddle shifters - it's easy!
Scope of delivery:- 2x shift paddles (left and right) in silver- Made from aluminium, CNC-milled
Compatible vehicles:BMW 1 Series (2019+, F40)BMW 2 Series (2020+, F44)BMW 3 Series (2018+, G20, G21)BMW 4 Series (2020+, G22, G23, G26)BMW 5 Series (2017+, G30, G31)BMW 7 Series (2015+, G11, G12)BMW 8 Series (2018+, G14, G15, G16)BMW M3/Competition (2021+, G80, G81)BMW M4/Competition (2021+, G82)BMW M5/M5/Competition (2017+, F90, F90 LCI)BMW M8 Competition (2018+, F91, F92, F93)BMW X3/X3M/Competition (2017+, G01, F97)BMW X4/X4M/Competition (2018+, G02, F98)BMW X5/X5M/Competition (2019+, G05, F95)BMW X6/X6M/Competition (2019+, G06, F96)BMW X7/X7M (2019+, G07)BMW Z4 G29Toyota Supra MK5
Introducing the ultimate upgrade for the F-Series: The Pre-preg carbon fibre paddle shifters, designed and manufactured in Germany.
These high-quality paddle shifters are made from pre-impregnated carbon fibre, resulting in a stronger and more durable product. In addition, the lightweight design of these paddle shifters not only gives your car a sporty look, but also improves your driving experience with faster and more precise gear changes. Furthermore, the carbon fibre material is wear-resistant, ensuring the durability of these paddle shifters for years to come.
Whether you're an avid racetrack fan or just want to add a touch of racing style to your vehicle, these paddle shifters are the perfect choice.
Details:- Full replacement for the OEM paddle shifters- Manufactured using 2×2 woven and pre-impregnated carbon fibre- Full carbon fibre replacement, hollow design- Coated in gloss lacquered finish- Better ergonomics, our paddle shifters were developed using 3D scans of the OEM steering wheel to get the best fit- Developed and manufactured in Germany
When developing these paddle shifters, we kept two things in mind:1. they had to look fantastic, as you spend a lot of time behind the wheel, it has to look good.2. obviously: ergonomics, they have to look good and work better than OEM. No matter where you interact with them, they work perfectly.
Scope of delivery:- 2x paddle shifters (left and right)- Made from carbon fibre- available +/- colours: red, blue, white- Made in Germany
Compatible vehicles:BMW 1 Series F20/F21BMW 2 Series F22/F23BMW 2 Series F45BMW 2 Series F87BMW 3 Series F30/F31BMW 3 Series F34BMW 3 Series F80BMW 4 Series F32/F33BMW 4 Series F82/83BMW 5 Series F07/F10/F11BMW 6 Series F06/F12/F13BMW i8BMW X1 F48 (from 2015)BMW X3 F25BMW X4 F26BMW X5 F15BMW X5 F85BMW X6 F16BMW X6 F86
We present the ultimate upgrade for the G-Series, F4X/F9X or Toyota Supra: The Pre-preg Carbon Paddle Shifters, developed and manufactured in Germany.
These high-quality paddle shifters are made from pre-impregnated carbon fibre, resulting in a stronger and more durable product. In addition, the lightweight design of these paddle shifters not only gives your car a sporty look, but also improves your driving experience with faster and more precise gear changes. Furthermore, the carbon fibre material is wear-resistant, ensuring the durability of these paddle shifters for years to come.
Whether you're an avid racetrack fan or just want to add a touch of racing style to your vehicle, these paddle shifters are the perfect choice.
Details:- Full replacement for the OEM paddle shifters- Manufactured using 2×2 woven and pre-impregnated carbon fibre- Full carbon fibre replacement, hollow design- Coated in gloss lacquered finish- Better ergonomics, our paddle shifters were developed using 3D scans of the OEM steering wheel to get the best fit- Developed and manufactured in Germany
When developing these paddle shifters, we kept two things in mind:1. they had to look fantastic, as you spend a lot of time behind the wheel, it has to look good.2. obviously: ergonomics, they have to look good and work better than OEM. No matter where you interact with them, they work perfectly.
Scope of delivery:- 2x paddle shifters (left and right)- Made from carbon fibre
Compatible vehicles:BMW 1 Series (2019+, F40)BMW 2 Series (2020+, F44)BMW 3 Series (2018+, G20, G21)BMW 4 Series (2020+, G22, G23, G26)BMW 5 Series (2017+, G30, G31)BMW 7 Series (2015+, G11, G12)BMW 8 Series (2018+, G14, G15, G16)BMW M3 Competition (2021+, G80, G81)BMW M4 Competition (2021+, G82)BMW M5/M5 Competition (2017+, F90, F90 LCI)BMW M8 Competition (2018+, F91, F92, F93)BMW X3/X3M Competition (2017+, G01, F97)BMW X4/X4M Competition (2018+, G02, F98)BMW X5/X5M Competition (2019+, G05, F95)BMW X6/X6M Competition (2019+, G06, F96)BMW X7/X7M (2019+, G07)BMW Z4 G29Toyota Supra MK5
Facts:
Material: Carbon
Manufacturer: Eventuri
The Eventuri philosophy of challenging the standard for existing aftermarket solutions is also reflected in the panel filters. The best design, relentless testing to perfection and the latest prototyping methods result in an exceptional product.
With the panel filters, the focus is on performance, which is guaranteed by CFD analyses, airflow tests, inlet temperatures and extensive dyno tests. Each panel filter is designed to fit into the OEM filter housings.
Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction
BMW 5 Series (F10)M5412kW / 560hp4395cm³S63 B44 B09.11 - 10.16
BMW 6 Series (F12/F13)M6412kW / 560hp4395cm³S63 B44 B03.12 - 06.18
The Performance intercooler kit is suitable for the following vehicles:BMW 525d 2004-2010 E60/61 130-145KW/177-197hp*BMW 530d 2003-2010 E60/61 160-173KW/218-235hp*BMW 535d 2004-2010 E60/E61 200-210KW/272-286hpBMW 635d 2006-2010 E63/E64 200-210KW/272-286hp*Adaptation to the module carrier necessary.
Maximum power for your vehicle with our Performance intercooler kit!
Your BMW deserves the best when it comes to performance and efficiency. Our Performance intercooler kit is the ultimate solution to unlock the full potential of your vehicle. Here are some impressive features of this kit: With net dimensions of 530 mm x 244 [134] mm x 150 [50] mm )= 13.5Liter and a stepped shape, our intercooler offers an impressive 87% larger flow area than the stock cooler. This means your engine gets more fresh air, resulting in improved combustion and increased performance. Our kit offers an astonishing 95% more charge air volume than the factory radiator. This results in increased power and a noticeable increase in torque.
The high performance mesh offers excellent cooling properties and ensures that your engine always maintains the optimum operating temperature. Despite its impressive performance increase, our intercooler is lightweight at just 9.8 kg and does not add unnecessary weight to your vehicle. CAD designed free-form cast aluminum end boxes ensure the best possible internal airflow and minimize back pressure compared to the stock cooler. Installation is carried out by replacing the OEM intercooler and is easy to perform. The original charge air hoses can still be used, which makes installation even easier. All our intercoolers are coated with an anti-corrosion coating that also has heat conduction properties. This guarantees long-lasting and optimum cooling. We place great emphasis on quality and continuously monitor the manufacture of our products to ensure that they meet the highest standards.
Take the opportunity to increase the performance and efficiency of your vehicle. Visit our website for more information and to order your kit.
Advantages of the Wagner Tuning intercooler:- Improved cooling performance- 87% larger inflow area- 95% more charge air volume- Minimized back pressure- Plug & Play
Scope of delivery:1 intercooler1 assembly instructionAttention: Not approved in the area of the StVZO.
The performance intercooler kit fits the following vehicles:BMW F07/F10/F11/F18 535i (x) (2009-2016)BMW F10/F11 518d (2013-2016)BMW F07/F10/F11 520d (x) (2010-2016)BMW F10/F11 525d (x) (2010-2016)BMW F07/F10/F11 530d (x) (2010-2016)BMW F07/F10/F11 535d (x) (2010-2016)BMW F06/F12/F13 640i (x) (2010-2016)BMW F06/F12/F13 640d (x) (2010-2016)BMW F01/F02 740i (2007-2012)BMW F01/F02 730d (x) (2007-2015)BMW F01/F02 740d (x) (2007-2015)
Unleash the full power of your vehicle with our Performance Intercooler Kit!
Your
vehicle
deserves the best, and our Performance Intercooler Kit will make sure you get just that. Here's what you can expect:
With mesh dimensions of 570 mm x 302 mm x 100 mm (stepped), our intercooler offers an impressive 92% larger flow area compared to the factory intercooler. This means your engine gets more fresh air, resulting in a noticeable increase in power. Our kit offers an astonishing 97% more charge air volume than the stock radiator. This leads to improved combustion and ultimately more power and efficiency. Despite its impressive size, our intercooler weighs only 11.7 kg. The radiator's end boxes are made of cast aluminium and have been optimized for the best possible internal airflow using CAD designs with internal baffles. This ensures optimal airflow and minimizes back pressure.
Our high performance mesh is specifically designed to provide excellent cooling characteristics. All our intercoolers have an anti-corrosion coating with excellent heat conduction properties to ensure long-lasting and optimal cooling.
Installation is carried out by replacing the OEM intercooler and is simple to perform. No complex adjustments required. We subject all our products to rigorous quality control to ensure they meet the highest standards.
Don't miss the chance to take the performance to a new level. Visit our website for more information and to order your kit.
Advantages of the Wagner Tuning intercooler:- improved cooling performance- 92% larger inflow area- 97% more charge air volume- flow-optimized- Plug & Play
Scope of delivery:1 intercooler1 mounting material1 fitting instructions
Attention: Not approved in the area of the StVZO.
The report includes the increase in rated power to 298kW (405hp).Note: Price errors/errors/changes reserved! Some vehicles require an additional OBD unlock. We will be happy to check this in advance using the chassis number.The purchase of the performance upgrade does not include registration in the vehicle documents. This must be purchased separately.To get the maximum performance from your vehicle, we recommend filling up with premium fuel (100/102 octane) before and after the optimisation.Compatible vehicles:VehicleTypePower outputEngine capacityEngineYear of construction
BMW 1 Series (F20/F21)M135i235kW / 320hp240kW / 326hp2979ccN55 B30 A07.12 - 06.16
BMW 2 Series (F22/F23)M235i / xDrive235kW / 320hp240kW / 326hp2979ccN55 B30 A10.13 - 06.16
BMW 3 Series (F30/F31/F34)335i225kW / 306hp2979ccN55 B30 A11.11 - 06.16
BMW 4 Series (F32/F33/F36)435i225kW / 306hp2979ccN55 B30 A07.13 - 02.16
BMW 5 Series (F07/F10/F11)535i225kW / 306hp2979ccN55 B30 A01.09 - 02.17
BMW 6 Series (F06/F12/F13)640i235kW / 320hp2979ccN55 B30 A07.11 - 10.18
BMW 7 Series (F01/F02/F03/F04)740i235kW / 320hp2979ccN55 B30 A07.12 - 12.15
BMW X5 (F15)xDrive 35i225kW / 306hp2979ccN55 B30 A12.13 - 07.18
BMW X6 (F16)xDrive 35i225kW / 306hp2979ccN55 B30 A08.14 - 07.19
The certificate includes the increase in rated power to 515kW (700hp).Note: Price errors/errors/changes reserved! Some vehicles require an additional OBD unlock. We will be happy to check this in advance using the chassis number.The purchase of the performance upgrade does not include registration in the vehicle documents. This must be purchased separately.To get the maximum performance from your vehicle, we recommend filling up with premium fuel (100/102 octane) before and after the optimisation.Compatible vehicles:VehicleTypePower outputEngine capacityEngineYear of construction
BMW 5 Series (F10)M5412kW / 560hp4395ccS63 B44 B09.11 - 10.16
BMW 6 Series (F06/F12/F13)M6412kW / 560hp4395ccS63 B44 B03.12 - 10.18
BMW X5 (F85)M423kW / 575hp4395ccS63 B44 B12.14 - 07.18
BMW X6 (F86)M423kW / 575hp4395ccS63 B44 B12.14 - 07.19
The Vorsteiner carbon rear spoiler for the F12 provides more downforce on the rear axle.
Made from autoclaved prepreg carbon.Expert opinion: Material certificate
Compatible vehicles:BMW 6 Convertible (F12) M6 2012-2018BMW 6 Convertible (F12) M6 Competition 2013-2015BMW 6 Convertible (F12) M6 Competition 2015-2018BMW 6 Coupe (F13) M6 2012-2017BMW 6 Coupe (F13) M6 Competition 2013-2015BMW 6 Coupe (F13) M6 Competition 2015-2017BMW 6 Gran Coupe (F06) M6 2013-2018BMW 6 Gran Coupe (F06) M6 Competition 2013-2015BMW 6 Gran Coupe (F06) M6 Competition 2015-2018
These PaddleShifterz aluminium paddle shifters fit the F-series steering wheel. They are a complete replacement for the OEM paddle shifters in your vehicle. They are finished in matte black and take the look of your vehicle's interior to the next level.
The paddle shifters are 155% larger than the OEM paddle shifters and offer more shifting range for a better daily drive or for track days like on the Nordschleife (Nürburgring). These paddle shifters have been designed with ease of use as the main focus. Not only should they look fantastic, but you should be able to shift through the gears with them from any angle. They are a direct replacement for the original paddle shifters, no additional glue or screws are required.Simply remove the original part and insert the new paddle shifters - it's easy!
Scope of delivery:- 2x paddle shifters (left and right) in matt black (powder-coated)- Made from 6061-grade aircraft aluminium, CNC-milled- +/- removed by CNC machine
Compatible vehicles:BMW 1 Series F20/F21BMW 2 Series F22/F23BMW 2 Series F45BMW 2 Series F87BMW 3 Series F30/F31BMW 3 Series F34BMW 3 Series F80BMW 4 Series F32/F33BMW 4 Series F82/83BMW 5 Series F07/F10/F11BMW 6 Series F06/F12/F13BMW i8BMW X1 F48 (from 2015)BMW X3 F25BMW X4 F26BMW X5 F15BMW X5 F85BMW X6 F16BMW X6 F86
These PaddleShifterz aluminium paddle shifters fit the G-series steering wheel. They are a complete replacement for the OEM paddle shifters in your vehicle. They come in a glossy red colour and take the look of your vehicle interior to the next level.
Ergonomics was a key consideration during development, as the paddle shifters should not only look good, but also function as expected. They have been designed to work better than the OEM paddle shifters.
They are fitted as a direct replacement for the OEM paddle shifters. No additional adapters or mounting hardware are required.Simply remove the original part and insert the new paddle shifters - it's easy!
Scope of delivery:- 2x shift paddles (left and right) in glossy red (powder-coated)- Made from aluminium, CNC-milled
Compatible vehicles:BMW 1 Series (2019+, F40)BMW 2 Series (2020+, F44)BMW 3 Series (2018+, G20, G21)BMW 4 Series (2020+, G22, G23, G26)BMW 5 Series (2017+, G30, G31)BMW 7 Series (2015+, G11, G12)BMW 8 Series (2018+, G14, G15, G16)BMW M3/Competition (2021+, G80, G81)BMW M4/Competition (2021+, G82)BMW M5/M5/Competition (2017+, F90, F90 LCI)BMW M8 Competition (2018+, F91, F92, F93)BMW X3/X3M/Competition (2017+, G01, F97)BMW X4/X4M/Competition (2018+, G02, F98)BMW X5/X5M/Competition (2019+, G05, F95)BMW X6/X6M/Competition (2019+, G06, F96)BMW X7/X7M (2019+, G07)BMW Z4 G29Toyota Supra MK5
These PaddleShifterz aluminium paddle shifters fit the F-series steering wheel. They are a complete replacement for the OEM paddle shifters in your vehicle. They are finished in silver and take the look of your vehicle interior to the next level.
The paddle shifters are 155% larger than the OEM paddle shifters and offer more shifting range for a better daily drive or for track days like on the Nordschleife (Nürburgring). These paddle shifters have been designed with ease of use as the main focus. Not only should they look fantastic, but you should be able to shift through the gears with them from any angle. They are a direct replacement for the original paddle shifters, no additional glue or screws are required.Simply remove the original part and insert the new paddle shifters - it's easy!
Scope of delivery:- 2x paddle shifters (left and right) in silver (powder-coated)- Made from 6061-grade aircraft aluminium, CNC-milled- +/- removed by CNC machine
Compatible vehicles:BMW 1 Series F20/F21BMW 2 Series F22/F23BMW 2 Series F45BMW 2 Series F87BMW 3 Series F30/F31BMW 3 Series F34BMW 3 Series F80BMW 4 Series F32/F33BMW 4 Series F82/83BMW 5 Series F07/F10/F11BMW 6 Series F06/F12/F13BMW i8BMW X1 F48 (from 2015)BMW X3 F25BMW X4 F26BMW X5 F15BMW X5 F85BMW X6 F16BMW X6 F86
These aluminum PaddleShifterz paddle shifters fit the F-Series steering wheel. They are a complete replacement for the OEM paddle shifters in your vehicle. They are finished in glossy red and take the look of your vehicle's interior to the next level.
The paddle shifters are 155% larger than the OEM paddle shifters and offer more shifting range for a better daily drive or for track days like on the Nordschleife (Nürburgring). These paddle shifters have been designed with ease of use in mind. Not only should they look fantastic, but you should be able to shift through the gears with them from any angle. They are a direct replacement for the original paddle shifters, no additional glue or screws are required.Simply remove the original part and insert the new paddle shifters - it's easy!
Scope of delivery:- 2x shift paddles (left and right) in glossy red (powder-coated)- Made from 6061-grade aircraft aluminum, CNC machined- +/- removed by CNC machine
Compatible vehicles:BMW 1 Series F20/F21BMW 2 Series F22/F23BMW 2 Series F45BMW 2 Series F87BMW 3 Series F30/F31BMW 3 Series F34BMW 3 Series F80BMW 4 Series F32/F33BMW 4 Series F82/83BMW 5 Series F07/F10/F11BMW 6 Series F06/F12/F13BMW i8BMW X1 F48 (from 2015)BMW X3 F25BMW X4 F26BMW X5 F15BMW X5 F85BMW X6 F16BMW X6 F86
The 3DDesign carbon side skirts for F06 enhance the side view of the vehicle immensely. Our premium partner 3DDesign is known as a perfectionist and stands for a high degree of individuality as well as the continuous further development of the product range. These carbon side skirts not only impress with their sporty carbon fibre look, but also leave nothing to be desired in terms of aerodynamics.Incl. parts certificate
Compatible vehicles:BMW 6 Convertible (F12) M6 2012-2018BMW 6 Convertible (F12) M6 Competition 2013-2015BMW 6 Convertible (F12) M6 Competition 2015-2018BMW 6 Coupe (F13) M6 2012-2017BMW 6 Coupe (F13) M6 Competition 2013-2015BMW 6 Coupe (F13) M6 Competition 2015-2017BMW 6 Gran Coupe (F06) M6 2013-2018BMW 6 Gran Coupe (F06) M6 Competition 2013-2015BMW 6 Gran Coupe (F06) M6 Competition 2015-2018
The Vorsteiner carbon side skirts for the F12 improve the aerodynamics of the vehicle. A suction effect is created at higher speeds.
Made from autoclaved prepreg carbon fibre.Expertise: Material certificate
Compatible vehicles:BMW 6 Convertible (F12) M6 2012-2018BMW 6 Convertible (F12) M6 Competition 2013-2015BMW 6 Convertible (F12) M6 Competition 2015-2018
The AULITZKY app “do it yourself”
Get your app now to tune your car yourself or manage a selection of your finished maps, which have been individually tuned by us on the test bench, and flash them to your vehicle in no time at all.
In addition to flashing your engine control unit, we also offer transmission programming.
It is also possible to fully read and delete the fault memory.
Your benefits at a glance:-software for ECU (engine control unit)-Software for TCU (transmission control unit)-Read fault memory-Delete fault memory-Datalogging-Tuning for Stage 1 & Stage 2 included-Custom maps possible-Stage 3 available on site for an additional charge
Attention: From certain model years and variants, an OBD unlock or ECU unlock is required to ensure that your vehicle can be flashed via OBD.The OBD unlock can be carried out by sending the ECU to us or by our support partners at various locations in Germany. For the ECU unlock we need the vehicle in our workshop for approx. 1.5 - 2 weeks.
-Stage 1: Pipercross air filter-Stage 2: additional downpipe, charge pipe-Stage 3: additional upgrade turbocharger, Dorch high-pressure pump, turbocharger inlet, exhaust system
Note: Registration of the performance upgrade is not part of this order and must be requested separately by e-mail.Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction
BMW 5er (F07)550i / xDrive 330kW / 449hp4395cm³N63 B44 A, N63 B44 B07.12 - 02.17
BMW 5er (F10)M5 412kW / 560hp4395cm³S63 B44 B09.11 - 10.16
BMW 5er (F10)M5 Competition423kW / 575hp4395cm³S63 B44 B02.13 - 10.16
BMW 5er (F10)M5 30th Anniversary441kW / 600hp4395cm³S63 B44 B07.14 - 10.16
BMW 6er (F13)650i / xDrive 330kW / 449hp4395cm³N63 B44 B07.12 - 10.17
BMW 6er (F13)M6412kW / 560hp4395cm³S63 B44 B07.12 - 10.17
BMW 6er (F13)M6 Competition423kW / 575hp441kW / 600hp4395cm³S63 B44 B07.13 - 02.1503.15 - 10.17
BMW X5 (F15/F85)50i xDrive330kW / 449hp4395cm³N63 B44 B08.13 - 07.18
BMW X5 (F85)M423kW / 575hp4395cm³S63 B44 B12.14 - 07.18
BMW X6 (F16/F86)50i xDrive330kW / 449hp4395cm³N63 B44 B08.14 - 07.19
BMW X6 (F86)M423kW / 575hp4395cm³S63 B44 B12.14 - 07.19
The AULITZKY app “do it yourself”
Get your app now to tune your car yourself or manage a selection of your finished maps, which have been individually tuned by us on the test bench, and flash them to your vehicle in no time at all.
In addition to flashing your engine control unit, we also offer transmission programming.
It is also possible to fully read and delete the fault memory.
Your benefits at a glance:-software for ECU (engine control unit)-Software for TCU (transmission control unit)-Read fault memory-Delete fault memory-Datalogging-Tuning for Stage 1 & Stage 2 included-Custom maps possible-Stage 3 available on site for an additional charge
Attention: From certain model years and variants, an OBD unlock or ECU unlock is required to ensure that your vehicle can be flashed via OBD.The OBD unlock can be carried out by sending the ECU to us or by our support partners at various locations in Germany. For the ECU unlock we need the vehicle in our workshop for approx. 1.5 - 2 weeks.
-Stage 1: Pipercross air filter-Stage 2: additional downpipe, charge pipe-Stage 3: additional upgrade turbocharger, Dorch high-pressure pump, turbocharger inlet, exhaust system
Note: Registration of the performance upgrade is not part of this order and must be requested separately by e-mail.Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction
BMW 1er (F20/F21)M140i / xDrive250kW / 340hp2998cm³B58 B30 A09.15- 05.18
BMW 2er Coupe (F22)M240i / xDrive250kW / 340hp2998cm³B58 B30 A09.15 - 05.18
BMW 2er Coupe (G42)M240i / xDrive275kW / 374hp2998cm³B58 B30 B07.21 -
BMW 3er (F30/F31/F34)340i / xDrive240kW / 326hp265kW / 360hp2979cm³B58 B30 A07.15 -
BMW 3er (G20)M340i xDrive275kW / 374hp285kW / 387hp2998cm³B58B30B07.20 -
BMW 4er (F32/F33/F36)440i / xDrive240kW / 326hp265kW / 360hp2979cm³B58 B30 A03.16 - 05.21
BMW 4er (G22)M440i xDrive275kW / 374hp285kW / 387hp2998cm³B58B30B07.20 -
BMW 5er (G30/G31)540i / xDrive250kW / 340hp265kW / 360hp2998cm³B58 B30 A, B58 B30 C09.16 - 07.19
BMW 5er (G30/G31)545e xDrive290kW / 394hp2998cm³B58 B30 C11.20 -
BMW 6er (G32)640i / xDrive250kW / 340hp265kW / 360hp2998cm³B58 B30 A, B58 B30 C06.17 - 07.19
BMW 7er (G11/G12)740i / xDrive245kW / 333hp250kW / 340hp2998cm³B58 B30 C03.19 -
BMW 8er (G14/G15/G16)840i / xDrive245kW / 333hp250kW / 340hp2998cm³B58 B30 C07.19 -
BMW X3 (G01)xDrive M40i260kW / 354hp265kW / 360hp285kW / 387hp2998cm³B58 B30 A, B58 B30 B08.17 - 10.19
BMW X4 (G02)xDrive M40i260kW / 354hp265kW / 360hp285kW / 387hp2998cm³B58 B30 A04.18 -
BMW X5 (G05)xDrive 40i250kW / 340hp280kW / 381hp2998cm³B58 B30 C08.18 -04.23 -
BMW X5 (G05)xDrive 45e235kW / 320hp290kW / 394hp2998cm³B58 B30 C06.19 -
BMW X6 (G06)xDrive 40i250kW / 340hp2998cm³B58 B30 C08.19 - 03.23
BMW X7 (G07)xDrive 40i250kW / 340hp2998cm³B58 B30 C03.19 -
BMW Z4 (G29)M40i250kW / 340hp2998cm³B58 B30 C11.18 -
ToyotaSupra GR (A90/DB)250kW / 340hp2998cm³B5803.19 -