Actuator for exhaust flap OEM part number: 18307851568 (18 30 7 851 568) Suitable for the following BMW models with exhaust flap: F80 F82 F83 F85 F86 F87N F90 F91 F92 F93 F95 F96 F97 F98 G01 G02 G05 G06 G14 G15 G16 G20 G21 G22 G23 G26 G30 G42 G82 G83

The sports air filter for the F97 and F98 features a direct-fit design that does not interfere with your vehicle's ECU recognition and retains the original design. - Improved mileage - Reduced emissions - Cost-effective and quick upgrade - Extends the life of the engine - Increased performance - Improved airflow - Reusable, can be cleaned - Larger filter area     - Higher air permeability     - Not approved in the STVZO area OEM part number: 13729502014 Compatible vehicles: - X3 M / Competition (F97) - X4 M / Competition (F98)

Experience the fascinating world of carbon air intakes customised for the F97 and F98. These have been developed to give your vehicle a unique appearance.Unlike normal carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x SOOQOO air intakes Compatible vehicles:BMW X3M/ Competition (F97) FaceliftBMW X4M/ Competition (F98) Facelift Note: This is NOT an original BMW product!

Facts: - 4.49“ (114mm) > 3” (76mm), replaces the main catalyst - with 200 cell stainless steel sports catalyst - Euro 6 compatible - for current OPF models up to 10/2019 - with Thermo-Integral insulation (for an extra charge) - with ECE approval* Compatible vehicles:VehicleVehicle typePowerEngine capacityEngineYear of construction BMW X3 (G01)xDrive M40i OPF260kW / 354hp2998cm³B58 B30 A05.18 - 10.19 BMW X4 (G02)xDrive M40i OPF260kW / 354hp2998cm³B58 B30 A04.18 - 10.19 Note: Depending on the software version, the engine control light may light up. We recommend the purchase of an OFF set module or software customisation. *This downpipe has ECE approval so that it can be used within the scope of the StVZO without registration in the vehicle documents.

Facts: - 4.49“ (114mm) > 3” (76mm), replaces the main catalyst - with 200 cell stainless steel sports catalyst - Euro 6 compatible - for current OPF models from 10/2019 - with Thermo-Integral insulation (for an extra charge) - with ECE approval* Compatible vehicles:VehicleVehicle typePowerEngine capacityEngineYear of construction BMW X3 (G01)xDrive M40i OPF285kW / 387hp2998cm³B58 B30 B10.19 - BMW X4 (G02)xDrive M40i OPF285kW / 387hp2998cm³B58 B30 A10.19 - Note: Depending on the software version, the engine control light may light up. We recommend the purchase of an OFF set module or software customisation. *This downpipe has ECE approval so that it can be used within the scope of the German Road Traffic Licensing Regulations (StVZO) without registration in the vehicle documents.

Facts: - Tailpipes: 4x black - 3.0 inch (76mm) stainless steel - MSD removal - electric flaps - Made in Germany (Lake Constance) - with/without ECE approval (depending on choice of flap control)* Scope of delivery: - 1x Aulitzky Exhaust exhaust system from OPF - 4x black tailpipes - ECE handout Compatible vehicles:VehicleVehicle typePowerEngine capacityEngineYear of constructionBMW X3 (F97)M353kW / 480hp2993cm³S58 B30 A03.19 -BMW X3 (F97)M Competition375kW / 510hp2993cmS58 B30 A03.19 -BMW X4 (F98)M353kW / 480hp2993cm³S58 B30 A03.19 -BMW X4 (F98)M Competition375kW / 510hp2993cmS58 B30 A03.19 - *ATTENTION!In conjunction with the standard or ECE flap control (with type approval), this flap exhaust system has ECE approval so that it can be used legally within the scope of the StVZO without registration in the vehicle documents.The use of flap exhaust systems in conjunction with the race flap control (without approval) is not permitted for use on public roads and is only intended for racing purposes!  If you nevertheless install a product without approval in your vehicle and use it within the scope of the StVZO, you are liable to prosecution. Possible consequences that you can expect in this case: Expiry of the operating license according to §19 of the StVZO and a possible resulting immobilization of the vehicle. Other possible consequences, such as a charge of tax evasion, as well as possible investigations by the environmental authorities are at the discretion of the investigators.

Experience the fascinating world of carbon front canards customised for the F97/F98. These have been developed to give your vehicle a unique appearance.Unlike normal carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x set of SOOQOO front canards Compatible vehicles:BMW X3M/ Competition (F97) FaceliftBMW X4M/ Competition (F98) Facelift Note: This is NOT an original BMW product!

Facts: - 3 inch (76cm) Charge Pipe made of T-6061 aluminum in black - incl. mounting rubbers, clamps - replaces the BMW original part with the part number 13718601684 - Plug'n'Play installation - without approval in the area of the StVZO The aluminium charge pipe replaces the factory plastic pipe. In more powerful vehicles, the increased boost pressure can cause the original pipe to burst. In the worst case, this can lead to engine damage due to fragments being sucked in. Compared to the original, the pressure pipe has an enlarged diameter of 76mm (3").This reduces air turbulence and at the same time increases the air flow. This allows the turbocharger to respond more quickly, which increases the maximum possible output. The engine control unit does not need to be retuned. Even at very high charge pressures, there is no risk of bursting with this pressure pipe. The charge pipe also provides a good basis for retrofitting a water-methanol injection system; a connection for the injector is already prepared (thread for water-methanol injection: 1/8" inch, 21/64 fine thread).The charge pipe is fitted as a plug'n'play direct replacement for the standard part. The charge pipe replaces the original part with the following part number: 13718601684 Compatible vehicles:BMW 1' F20 LCI (09/2015 - 08/2018) M140i / xDriveBMW 1' F21 LCI (09/2015 - 08/2018) M140i / xDriveBMW 2' F22 (09/2015 - 06/2017) M240i / xDriveBMW 2' F22 LCI (09/2016 - 08/2018) M240i / xDriveBMW 2' F23 (09/2015 - 06/2017) M240i / xDriveBMW 2' F23 LCI (10/2016 - 08/2018) M240i / xDriveBMW 3' F30 LCI (10/2014 - 09/2018) 340i / xDriveBMW 3' F31 LCI (10/2014 - 08/2018) 340i / xDriveBMW 3' F34 GT LCI (09/2015 - 07/2018) 340i / xDriveBMW 4' F32 (04/2015 - 02/2017) 440i / xDriveBMW 4' F32 LCI (05/2016 - 08/2018) 440i / xDriveBMW 4' F33 (03/2015 - 02/2017) 440i / xDriveBMW 4' F33 LCI (05/2016 - 08/2018) 440i / xDriveBMW 4' F36 Gran Coupé (03/2015 - 02/2017) 440i / xDriveBMW 4' F36 Gran Coupé LCI (05/2016 - 07/2018) 440i / xDriveBMW 5' G30 (10/2015 - 08/2018) 540i / xDriveBMW 5' G31 (03/2016 - 07/2018) 540i / xDriveBMW 5' G38 (02/2016 - 08/2018) 540i / xDriveBMW 6' G32 GT (09/2016 - 07/2018) 640i / xDriveBMW 7' G11 (10/2014 - 07/2018) 740i / xDriveBMW 7' G12 (10/2014 - 08/2018) 740i / xDriveBMW X3 G01 (10/2016 - 09/2018) xDrive M40iBMW X4 G02 (03/2017 - 08/2018) xDrive M40i Attention: Not approved in the area of the StVZO.

Transform your F97 into a high-performance powerhouse with the BlackBoost cooling air intake system. Experience more power, style and driving dynamics with this premium upgrade. In the world of performance modifications, the airbox is one of the most important engine components you should upgrade. The factory airbox is very restrictive in terms of airflow and filter area. Our cooling air intakes are designed and engineered to overcome these factory restrictions and deliver the maximum airflow with the lowest possible temperatures given the space available. The BlackBoost Cold Air Intakes are designed to be flush with the bonnet of the vehicle and ensure a consistent seal with the rubber seals of the airbox, whilst also ensuring a large surface area to work properly. The BlackBoost twin-flow filters are specifically designed to maximise airflow and surface area. The BlackBoost intake kit is a plug-and-play solution that works perfectly without further customisation and requires no additional software tuning. It also works smoothly in combination with turbo upgrades, downpipes, methanol injections etc. to unleash the necessary airflow and utilise the full capacity of the engine for those aiming for 1000+ WHP figures.Key Features:- Proven power increase from 8 to 30+ hp on production vehicles- Improved responsiveness across the entire rev range- Optimised airflow and increased volume range compared to standard equipment- Increased surface area of the filter elements- Can support airflow for 1000+ WHP configurations- Larger filter element surface area compared to OEM- Plug-and-play bolt-on installation- No ECU tuning required Compatible vehicles:BMW X3M (F97) 353kW | 480HP | 2993cm³ | S58BMW X3M (F97) Competition | 375kW | 510HP | 2993cm³ | S58 Attention: The intake can only be used in combination with the approved 670hp Stage and must be installed in an open configuration! The intake itself is not approved. Only with in-house installation!

For the F97/F98, we have chosen our usual strategy of combining discreet aesthetics with exceptional aerodynamic efficiency. The finished piece with the twill weave pattern is visually even more impressive than its standard counterpart, yet blends in perfectly with the M Performance design details.The front splitter developed by Sterckenn consists of three vertical bars that dramatically emphasize the aggressive appearance of the hot SUVs without compromising their usability. Consisting of three independent components, the splitter does not compromise the ground clearance of the bumper and is easy to fit thanks to its add-on design.The three-part design also offers the advantage of lower shipping costs.

3DDesign carbon front lip for F97 and F98 Compatible vehicles:BMW X3 (G01, F97) M Since 2019BMW X3 (G01, F97) M Competition since 2019BMW X4 (G02, F98) M since 2019BMW X4 (G02, F98) M Competition Since 2019

Experience the fascinating world of the carbon front spoiler customised for the F97/F98. This has been developed to give your vehicle a unique appearance.Unlike normal carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x SOOQOO front spoiler Compatible vehicles:BMW X3M/ Competition (F97) FaceliftBMW X4M/ Competition (F98) Facelift Note: This is NOT an original BMW product!

Facts:Acceleration time : 60-130mph reduced by 0.2 secondsBrand: EventuriMaterial: CarbonColor: Carbon blackParts certificate: A certificate is available for this product for certain regions and vehicles (details below) The OEM Intake, although awkward at first glance, is a very well thought-out system given the available space. The flow path from the filters to the turbo inlets is very direct and does not change direction as abruptly as the usual OEM airbox designs. So instead of a completely new design, we focused on improving the OEM airbox with less restrictive flow and improved temperature efficiency. We developed replacement filters made of non-woven fabric, which have a much higher flow rate compared to the paper filters. To lower air intake temperatures and force air into the airbox, we designed large front vanes that sit behind the grilles. The carbon vanes direct air into the ducts and effectively insulate the intake side of the airbox. The final piece is the carbon airbox lid, which doesn't increase performance, but allows for a more audible intake sound and gives the engine bay a much needed aesthetic improvement. The Eventuri intake system consists of a series of components designed for a specific purpose and manufactured to the highest standards. Here are the details for each component and the design ethos behind them: Each intake system consists of:1 x carbon fiber airbox cover2 x carbon air scoops4 x direct replacement high flow air filtersLaser cut stainless steel brackets Dyno data : Coming soon Parts certificateThe manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles:* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24Countries Model Type approval*DE/AT BMW X3M e1*2007/46*1988*..DE/AT BMW X3M Competition e1*2007/46*1988*..DE/AT BMW X4M e1*2007/46*1988*..DE/AT BMW X4M Competition e1*2007/46*1988*.. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW X3 (F97)M353kW / 480hp2993cm³S58 B30 A03.19 -BMW X4 (F98)M353kW / 480hp2993cm³S58 B30 A03.19 -

Facts: NOW WITH PARTS CERTIFICATE! Acceleration time : 60-130mph reduced by 0.2 seconds Brand: Eventuri Material: Carbon Colour: Carbon black Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) The F97/F98 OEM Intake, although awkward at first glance, is a very well thought-out system given the available space. The flow path from the filters to the turbo inlets is very direct and does not change direction as abruptly as the usual OEM airbox designs. So instead of a completely new design, we focussed on improving the OEM airbox with less restrictive flow and improved temperature efficiency. We have developed replacement filters made of non-woven fabric, which have a much higher flow rate compared to the paper filters. To lower air intake temperatures and force air into the airbox, we designed large front vanes that sit behind the grilles. The carbon vanes direct air into the ducts and effectively insulate the intake side of the airbox. The final piece is the carbon airbox lid, which doesn't increase performance, but allows for a more audible intake sound and gives the engine bay a much needed aesthetic improvement. The Eventuri intake system consists of a number of components designed for a specific purpose and manufactured to the highest standards. Here are the details for each component and the design ethos behind them: Each intake system consists of: 1 x carbon fibre airbox cover 2 x carbon fibre air scoops 4 x High flow direct replacement air filters Laser cut stainless steel brackets Dyno data : Coming soon Parts certificate The manufacturer's specifications apply for installation. The existence of a certificate is no guarantee that the product can be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24 Country ModelType approval* DE/AT BMW X3Me1*2007/46*1988*.. DE/AT BMW X3M Competition e1*2007/46*1988*.. DE/AT BMW X4M e1*2007/46*1988*.. DE/AT BMW X4M Competition e1*2007/46*1988*.. CH/LI BMW X3 M1BP684-1BP685 CH/LI BMW X4 M 1BP686-1BP687 Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of constructionBMW X3 (F97)M353kW / 480hp2993cm³S58 B30 A03.19 -BMW X4 (F98)M353kW / 480hp2993cm³S58 B30 A03.19 -

Eibach Pro-Kit performance suspension springs for front and rear axle E10-20-040-03-22 The Eibach Pro-Kit lowering springs are the ideal solution for your vehicle, as the kit lowers the centre of gravity, reduces rebound when accelerating, reduces body roll when cornering and dips when braking. As a result, understeer and oversteer no longer occur. Lowering the vehicle with the Pro-Kit springs reduces the standard distance between the tyres and the wheel arch and gives the vehicle a sporty look. In addition, the handling of the vehicle is maximised. The Eibach Pro-Kits are designed by Eibach suspension engineers and test experts to deliver a combination of sporty looks and performance without compromising on safety or ride quality. - Developed and tested for combination with standard and aftermarket dampers- Component of the Eibach Pro system- Top performance handling- Lowers the vehicle's centre of gravity by up to 40 mm (depending on the vehicle)- Spring design for traction and attraction- Progressive suspension characteristics- Performance handling- ABE or parts certificate Note: Only for vehicles without levelling control. Information:- Lowering front axle: approx. 25mm- Lowering rear axle: approx. 25mm- Type of approval: with expert opinion- Suspension: for all standard damping systems- Illustration may differ from the original Compatible vehicles:- Axle load front axle: up to 1185kg- Axle load rear axle: up to 1425kg- EC type approval number: e1*2007/46*1988*..- Only for vehicles without levelling system BMW X3 (F97) M 353kW / 480PS 7909-ACGBMW X3 (F97) M Competition 375kW / 510hp 7909-ACFBMW X4 (F98) M 353kW / 480PS 7909-ACHBMW X4 (F98) M Competition 375kW / 510hp 7909-ACI

These PaddleShifterz aluminium paddle shifters fit the G-series steering wheel. They are a complete replacement for the OEM paddle shifters in your vehicle. They are finished in matt black and take the look of your vehicle interior to the next level. Ergonomics was a key consideration during development, as the paddle shifters should not only look good, but also function as expected. They have been designed to work better than the OEM paddle shifters. They are fitted as a direct replacement for the OEM paddle shifters. No additional adapters or mounting hardware are required.Simply remove the original part and insert the new paddle shifters - it's easy! Scope of delivery:- 2x paddle shifters (left and right) in matt black (powder-coated)- Made from aluminium, CNC-milled Compatible vehicles:BMW 1 Series (2019+, F40)BMW 2 Series (2020+, F44)BMW 3 Series (2018+, G20, G21)BMW 4 Series (2020+, G22, G23, G26)BMW 5 Series (2017+, G30, G31)BMW 7 Series (2015+, G11, G12)BMW 8 Series (2018+, G14, G15, G16)BMW M3/Competition (2021+, G80, G81)BMW M4/Competition (2021+, G82)BMW M5/M5/Competition (2017+, F90, F90 LCI)BMW M8 Competition (2018+, F91, F92, F93)BMW X3/X3M/Competition (2017+, G01, F97)BMW X4/X4M/Competition (2018+, G02, F98)BMW X5/X5M/Competition (2019+, G05, F95)BMW X6/X6M/Competition (2019+, G06, F96)BMW X7/X7M (2019+, G07)BMW Z4 G29Toyota Supra MK5

These PaddleShifterz aluminium paddle shifters fit the G-series steering wheel. They are a complete replacement for the OEM paddle shifters in your vehicle. They are finished in silver and take the look of your vehicle interior to the next level. Ergonomics was a key consideration during development, as the paddle shifters should not only look good, but also function as expected. They have been designed to work better than the OEM paddle shifters. They are fitted as a direct replacement for the OEM paddle shifters. No additional adapters or mounting hardware are required.Simply remove the original part and insert the new paddle shifters - it's easy! Scope of delivery:- 2x shift paddles (left and right) in silver- Made from aluminium, CNC-milled Compatible vehicles:BMW 1 Series (2019+, F40)BMW 2 Series (2020+, F44)BMW 3 Series (2018+, G20, G21)BMW 4 Series (2020+, G22, G23, G26)BMW 5 Series (2017+, G30, G31)BMW 7 Series (2015+, G11, G12)BMW 8 Series (2018+, G14, G15, G16)BMW M3/Competition (2021+, G80, G81)BMW M4/Competition (2021+, G82)BMW M5/M5/Competition (2017+, F90, F90 LCI)BMW M8 Competition (2018+, F91, F92, F93)BMW X3/X3M/Competition (2017+, G01, F97)BMW X4/X4M/Competition (2018+, G02, F98)BMW X5/X5M/Competition (2019+, G05, F95)BMW X6/X6M/Competition (2019+, G06, F96)BMW X7/X7M (2019+, G07)BMW Z4 G29Toyota Supra MK5

Introducing the ultimate upgrade for the F-Series: The Pre-preg carbon fibre paddle shifters, designed and manufactured in Germany. These high-quality paddle shifters are made from pre-impregnated carbon fibre, resulting in a stronger and more durable product. In addition, the lightweight design of these paddle shifters not only gives your car a sporty look, but also improves your driving experience with faster and more precise gear changes. Furthermore, the carbon fibre material is wear-resistant, ensuring the durability of these paddle shifters for years to come. Whether you're an avid racetrack fan or just want to add a touch of racing style to your vehicle, these paddle shifters are the perfect choice. Details:- Full replacement for the OEM paddle shifters- Manufactured using 2×2 woven and pre-impregnated carbon fibre- Full carbon fibre replacement, hollow design- Coated in gloss lacquered finish- Better ergonomics, our paddle shifters were developed using 3D scans of the OEM steering wheel to get the best fit- Developed and manufactured in Germany When developing these paddle shifters, we kept two things in mind:1. they had to look fantastic, as you spend a lot of time behind the wheel, it has to look good.2. obviously: ergonomics, they have to look good and work better than OEM. No matter where you interact with them, they work perfectly. Scope of delivery:- 2x paddle shifters (left and right)- Made from carbon fibre- available +/- colours: red, blue, white- Made in Germany Compatible vehicles:BMW 1 Series F20/F21BMW 2 Series F22/F23BMW 2 Series F45BMW 2 Series F87BMW 3 Series F30/F31BMW 3 Series F34BMW 3 Series F80BMW 4 Series F32/F33BMW 4 Series F82/83BMW 5 Series F07/F10/F11BMW 6 Series F06/F12/F13BMW i8BMW X1 F48 (from 2015)BMW X3 F25BMW X4 F26BMW X5 F15BMW X5 F85BMW X6 F16BMW X6 F86

We present the ultimate upgrade for the G-Series, F4X/F9X or Toyota Supra: The Pre-preg Carbon Paddle Shifters, developed and manufactured in Germany. These high-quality paddle shifters are made from pre-impregnated carbon fibre, resulting in a stronger and more durable product. In addition, the lightweight design of these paddle shifters not only gives your car a sporty look, but also improves your driving experience with faster and more precise gear changes. Furthermore, the carbon fibre material is wear-resistant, ensuring the durability of these paddle shifters for years to come. Whether you're an avid racetrack fan or just want to add a touch of racing style to your vehicle, these paddle shifters are the perfect choice. Details:- Full replacement for the OEM paddle shifters- Manufactured using 2×2 woven and pre-impregnated carbon fibre- Full carbon fibre replacement, hollow design- Coated in gloss lacquered finish- Better ergonomics, our paddle shifters were developed using 3D scans of the OEM steering wheel to get the best fit- Developed and manufactured in Germany When developing these paddle shifters, we kept two things in mind:1. they had to look fantastic, as you spend a lot of time behind the wheel, it has to look good.2. obviously: ergonomics, they have to look good and work better than OEM. No matter where you interact with them, they work perfectly. Scope of delivery:- 2x paddle shifters (left and right)- Made from carbon fibre Compatible vehicles:BMW 1 Series (2019+, F40)BMW 2 Series (2020+, F44)BMW 3 Series (2018+, G20, G21)BMW 4 Series (2020+, G22, G23, G26)BMW 5 Series (2017+, G30, G31)BMW 7 Series (2015+, G11, G12)BMW 8 Series (2018+, G14, G15, G16)BMW M3 Competition (2021+, G80, G81)BMW M4 Competition (2021+, G82)BMW M5/M5 Competition (2017+, F90, F90 LCI)BMW M8 Competition (2018+, F91, F92, F93)BMW X3/X3M Competition (2017+, G01, F97)BMW X4/X4M Competition (2018+, G02, F98)BMW X5/X5M Competition (2019+, G05, F95)BMW X6/X6M Competition (2019+, G06, F96)BMW X7/X7M (2019+, G07)BMW Z4 G29Toyota Supra MK5

Facts:- Plug & Play installation using illustrated installation instructions- Special wiring harness for your vehicle- High-quality electronics “Made In Germany”- Electronic components with product qualification for motor vehicles according to AEC-Q100 installed- Support from us as co-developer and manufacturer Scope of delivery:The scope of delivery includes the motorsport add-on module, an engine-specific wiring harness, illustrated installation instructions in DE/EN and a BYPASS connector, which you can use to restore your vehicle to series production. Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeYear of constructionBMW X3 (F97)M353kW / 480hp2993cm³S58 B30 A03.19 -BMW X3 (F97)M Competition375kW / 510hp2993cmS58 B30 A03.19 -BMW X4 (F98)M353kW / 480hp2993cm³S58 B30 A03.19 -BMW X4 (F98)M Competition375kW / 510hp2993cmS58 B30 A03.19 - LEGAL INFORMATION: THE INSTALLATION OF ADDITIONAL ELECTRONICS IS A STRUCTURAL MODIFICATION TO THE MANUFACTURER'S ELECTRONICS. WITHOUT REGISTRATION IN THE VEHICLE DOCUMENTS BY MEANS OF AN INDIVIDUAL CERTIFICATE FROM TÜV; DEKRA OR OTHER RECOGNIZED TESTING INSTITUTES, THE INSTALLATION WILL INVALIDATE THE OPERATING LICENSE. IF USED ON PUBLIC ROADS, THIS WILL RESULT IN THE LOSS OF INSURANCE COVER. WE DO NOT CURRENTLY HAVE A PARTS CERTIFICATE FOR YOUR VEHICLE. THEREFORE, THIS SYSTEM IS EXCLUSIVELY SUITABLE FOR MOTORSPORT. ATTENTION: IF YOU USE THE ADDITIONAL ELECTRONICS, YOU MAY LOSE YOUR WARRANTY CLAIMS AGAINST THE SELLER OR WARRANTY CLAIMS AGAINST THE MANUFACTURER. IF YOU HAVE ANY FURTHER QUESTIONS, PLEASE DO NOT HESITATE TO CONTACT US!

Service package: The AULITZKY app "do it yourself" + downpipe (incl. installation) + registration Get your app now to tune your car yourself or manage a selection of your finished maps, which have been individually tuned on our test bench, and flash them to your vehicle in no time at all. In addition to flashing your engine control unit, we also offer transmission programming. It is also possible to fully read and delete the fault memory. Your benefits at a glance: -software for ECU (engine control unit) -Software for TCU (transmission control unit) -Read fault memory -Delete fault memory -Datalogging -Tuning for Stage 1 & Stage 2 included -Custom maps possible -Stage 3 available on site for an additional charge Please note: From certain model years and variants, an OBD unlock or ECU unlock is required to ensure that your vehicle can be flashed via OBD. The OBD unlock can be carried out by sending the ECU to us or by our service centre partners at various locations in Germany. For the ECU unlock, we need the vehicle on site for approx. 1.5 - 2 weeks. *Note: Registration of the performance upgrade is ONLY possible in conjunction with our downpipe (AEDPM3G80).The downpipe is automatically included in this package. Compatible vehicles:VehicleTypePower outputEngine capacityEngineYear of constructionBMW 2 Series (G87)M2338kW / 460hp353kW / 480hp2993cm³S58 B30 A11.22 -08.24 -BMW 3 Series (G80)M3353kW / 480hp2993ccS58 B30 B11.20 -BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510hp390kW / 530hp2993ccS58 B30 A05.21 -07.24 -BMW 4 Series (G82)M4353kW / 480hp2993ccS58 B30 B11.20 -BMW 4 Series (G82/G83)M4 Competition / xDrive375kW / 510hp2993cm³S58 B30 A05.21 -BMW X3 (F97)M353kW / 480hp2993cm³S58 B30 A03.19 -BMW X3 (F97)M Competition375kW / 510hp2993cmS58 B30 A03.19 -BMW X4 (F98)M353kW / 480hp2993cm³S58 B30 A03.19 -BMW X4 (F98)M Competition375kW / 510hp2993cmS58 B30 A03.19 -

The carbon seat shell covers are a must for your vehicle and significantly enhance the interior! The easy-to-fit seat shell covers are made of Pre-Preg 2x2 carbon and perfectly match your interior. Details:- Made from pre-preg carbon fiber with a 3k 2x2 weave (OEM style)- Coated with a high gloss paint finish- 100% carbon construction to reduce weight to a minimum- Pre-applied HI-Bond adhesive tape for easy installation and secure attachment - Scope of delivery: 2x seat covers (set) for both front seats- registration-free Why Pre-Preg Carbon?There are a number of reasons why we recommend it to our customers: It's much stronger than regular carbon, which means longer durability and life in the long run. Spend a little more money now so you don't have to resort to replacements later because you mishandled your carbon and hurt its feelings. Pre preg carbon has a more consistent quality when it comes out of the mold, which means fewer issues or imperfections that would otherwise be undesirable in the finished product. The process eliminates air bubbles and more easily results in a smooth, shiny surface. This makes it an ideal part for your car. If weight savings are important to you, Pre-Preg is ideal as it is 70% lighter than alternative carbon parts. Compatible vehicles (only for BMW Comfort seats, see article image):BMW M2 (G87) 2023+BMW M3 (G80) 2021+BMW M4 (G82) 2021+BMW M3 (G80/G81) X Drive (2021+)BMW M4 (G82/G83) X Drive (from 2021)BMW X3M (F97)BMW X4M (F98)Note: This is NOT an original BMW product!

Made from Aircraft Grade T-6061 Aluminum, the Evolve Gear Shift Paddle Set puts you back in control of your M Performance vehicle, more feel and ease of use make the Evolve Gear Shift Paddle Set the superior choice over OEM paddles. Designed specifically for the M Performance steering wheel, the sleek Evolve Paddle Set follows the curves and lines of the steering wheel. Available in two finishes to complement the interior of your vehicle, you have the choice between Titanium and Dark Anthracite. We designed these paddle shifters with the racetrack in mind, so you can easily engage gears regardless of steering angle.In addition, the OEM control unit is retained and the entire paddle is replaced, this is not a stick-on version. Fits all F-Series & G-Series vehicles with the latest Gen.3 M Performance steering wheel:G87 M2G80/G81 M3G82/G83 M4F90 M5F91/F92 M8F97 X3MF98 X4MG01 X3G02 X4G05 X5G06 X6G07 X7G30 5 Series

These PaddleShifterz aluminium paddle shifters fit the F-series steering wheel. They are a complete replacement for the OEM paddle shifters in your vehicle. They are finished in matte black and take the look of your vehicle's interior to the next level. The paddle shifters are 155% larger than the OEM paddle shifters and offer more shifting range for a better daily drive or for track days like on the Nordschleife (Nürburgring). These paddle shifters have been designed with ease of use as the main focus. Not only should they look fantastic, but you should be able to shift through the gears with them from any angle. They are a direct replacement for the original paddle shifters, no additional glue or screws are required.Simply remove the original part and insert the new paddle shifters - it's easy! Scope of delivery:- 2x paddle shifters (left and right) in matt black (powder-coated)- Made from 6061-grade aircraft aluminium, CNC-milled- +/- removed by CNC machine Compatible vehicles:BMW 1 Series F20/F21BMW 2 Series F22/F23BMW 2 Series F45BMW 2 Series F87BMW 3 Series F30/F31BMW 3 Series F34BMW 3 Series F80BMW 4 Series F32/F33BMW 4 Series F82/83BMW 5 Series F07/F10/F11BMW 6 Series F06/F12/F13BMW i8BMW X1 F48 (from 2015)BMW X3 F25BMW X4 F26BMW X5 F15BMW X5 F85BMW X6 F16BMW X6 F86

These PaddleShifterz aluminium paddle shifters fit the G-series steering wheel. They are a complete replacement for the OEM paddle shifters in your vehicle. They come in a glossy red colour and take the look of your vehicle interior to the next level. Ergonomics was a key consideration during development, as the paddle shifters should not only look good, but also function as expected. They have been designed to work better than the OEM paddle shifters. They are fitted as a direct replacement for the OEM paddle shifters. No additional adapters or mounting hardware are required.Simply remove the original part and insert the new paddle shifters - it's easy! Scope of delivery:- 2x shift paddles (left and right) in glossy red (powder-coated)- Made from aluminium, CNC-milled Compatible vehicles:BMW 1 Series (2019+, F40)BMW 2 Series (2020+, F44)BMW 3 Series (2018+, G20, G21)BMW 4 Series (2020+, G22, G23, G26)BMW 5 Series (2017+, G30, G31)BMW 7 Series (2015+, G11, G12)BMW 8 Series (2018+, G14, G15, G16)BMW M3/Competition (2021+, G80, G81)BMW M4/Competition (2021+, G82)BMW M5/M5/Competition (2017+, F90, F90 LCI)BMW M8 Competition (2018+, F91, F92, F93)BMW X3/X3M/Competition (2017+, G01, F97)BMW X4/X4M/Competition (2018+, G02, F98)BMW X5/X5M/Competition (2019+, G05, F95)BMW X6/X6M/Competition (2019+, G06, F96)BMW X7/X7M (2019+, G07)BMW Z4 G29Toyota Supra MK5

These PaddleShifterz aluminium paddle shifters fit the F-series steering wheel. They are a complete replacement for the OEM paddle shifters in your vehicle. They are finished in silver and take the look of your vehicle interior to the next level. The paddle shifters are 155% larger than the OEM paddle shifters and offer more shifting range for a better daily drive or for track days like on the Nordschleife (Nürburgring). These paddle shifters have been designed with ease of use as the main focus. Not only should they look fantastic, but you should be able to shift through the gears with them from any angle. They are a direct replacement for the original paddle shifters, no additional glue or screws are required.Simply remove the original part and insert the new paddle shifters - it's easy! Scope of delivery:- 2x paddle shifters (left and right) in silver (powder-coated)- Made from 6061-grade aircraft aluminium, CNC-milled- +/- removed by CNC machine Compatible vehicles:BMW 1 Series F20/F21BMW 2 Series F22/F23BMW 2 Series F45BMW 2 Series F87BMW 3 Series F30/F31BMW 3 Series F34BMW 3 Series F80BMW 4 Series F32/F33BMW 4 Series F82/83BMW 5 Series F07/F10/F11BMW 6 Series F06/F12/F13BMW i8BMW X1 F48 (from 2015)BMW X3 F25BMW X4 F26BMW X5 F15BMW X5 F85BMW X6 F16BMW X6 F86

These aluminum PaddleShifterz paddle shifters fit the F-Series steering wheel. They are a complete replacement for the OEM paddle shifters in your vehicle. They are finished in glossy red and take the look of your vehicle's interior to the next level. The paddle shifters are 155% larger than the OEM paddle shifters and offer more shifting range for a better daily drive or for track days like on the Nordschleife (Nürburgring). These paddle shifters have been designed with ease of use in mind. Not only should they look fantastic, but you should be able to shift through the gears with them from any angle. They are a direct replacement for the original paddle shifters, no additional glue or screws are required.Simply remove the original part and insert the new paddle shifters - it's easy! Scope of delivery:- 2x shift paddles (left and right) in glossy red (powder-coated)- Made from 6061-grade aircraft aluminum, CNC machined- +/- removed by CNC machine Compatible vehicles:BMW 1 Series F20/F21BMW 2 Series F22/F23BMW 2 Series F45BMW 2 Series F87BMW 3 Series F30/F31BMW 3 Series F34BMW 3 Series F80BMW 4 Series F32/F33BMW 4 Series F82/83BMW 5 Series F07/F10/F11BMW 6 Series F06/F12/F13BMW i8BMW X1 F48 (from 2015)BMW X3 F25BMW X4 F26BMW X5 F15BMW X5 F85BMW X6 F16BMW X6 F86

Experience the fascinating world of the carbon side sill customised for the F97/F98. This was developed to give your vehicle a unique look.Unlike normal carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x SOOQOO side skirts Compatible vehicles:BMW X3M/ Competition (F97) FaceliftBMW X4M/ Competition (F98) Facelift Note: This is NOT an original BMW product!

The AULITZKY app “do it yourself” Get your app now to tune your car yourself or manage a selection of your finished maps, which have been individually tuned by us on the test bench, and flash them to your vehicle in no time at all. In addition to flashing your engine control unit, we also offer transmission programming. It is also possible to fully read and delete the fault memory. Your benefits at a glance:-software for ECU (engine control unit)-Software for TCU (transmission control unit)-Read fault memory-Delete fault memory-Datalogging-Tuning for Stage 1 & Stage 2 included-Custom maps possible-Stage 3 available on site for an additional charge Attention: From certain model years and variants, an OBD unlock or ECU unlock is required to ensure that your vehicle can be flashed via OBD.The OBD unlock can be carried out by sending the ECU to us or by our support partners at various locations in Germany. For the ECU unlock we need the vehicle in our workshop for approx. 1.5 - 2 weeks. -Stage 1: Pipercross air filter-Stage 2: additional downpipe, charge pipe-Stage 3: additional upgrade turbocharger, Dorch high-pressure pump, turbocharger inlet, exhaust system *Note: Registration of the performance upgrade is ONLY possible in conjunction with our downpipe (AEDPM3G80). Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of constructionBMW 2er (G87)M2338kW / 460hp353kW / 480hp2993cm³S58 B30 A11.22 -08.24 -BMW 3er (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 -BMW 3er (G80/G81)M3 Competition / xDrive375kW / 510hp390kW / 530hp2993cm³S58 B30 A05.21 -07.24 -BMW 4er (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 -BMW 4er (G82/G83)M4 Competition / xDrive375kW / 510hp2993cm³S58 B30 A05.21 -BMW X3 (F97)M353kW / 480hp2993cm³S58 B30 A03.19 -BMW X3 (F97)M Competition375kW / 510hp2993cmS58 B30 A03.19 -BMW X4 (F98)M353kW / 480hp2993cm³S58 B30 A03.19 -BMW X4 (F98)M Competition375kW / 510hp2993cm³S58 B30 A03.19 -

The AULITZKY app “do it yourself” Get your app now to tune your car yourself or manage a selection of your finished maps, which have been individually tuned by us on the test bench, and flash them to your vehicle in no time at all. In addition to flashing your engine control unit, we also offer transmission programming. It is also possible to fully read and delete the fault memory. Your benefits at a glance:-software for ECU (engine control unit)-Software for TCU (transmission control unit)-Read fault memory-Delete fault memory-Datalogging-Tuning for Stage 1 & Stage 2 included-Custom maps possible-Stage 3 available on site for an additional charge Attention: From certain model years and variants, an OBD unlock or ECU unlock is required to ensure that your vehicle can be flashed via OBD.The OBD unlock can be carried out by sending the ECU to us or by our support partners at various locations in Germany. For the ECU unlock we need the vehicle in our workshop for approx. 1.5 - 2 weeks. -Stage 1: Pipercross air filter-Stage 2: additional downpipe, charge pipe-Stage 3: additional upgrade turbocharger, Dorch high-pressure pump, turbocharger inlet, exhaust system Note: Registration of the performance upgrade is not part of this order and must be requested separately by e-mail.Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction BMW 1er (F20/F21)M140i / xDrive250kW / 340hp2998cm³B58 B30 A09.15- 05.18 BMW 2er Coupe (F22)M240i / xDrive250kW / 340hp2998cm³B58 B30 A09.15 - 05.18 BMW 2er Coupe (G42)M240i / xDrive275kW / 374hp2998cm³B58 B30 B07.21 - BMW 3er (F30/F31/F34)340i / xDrive240kW / 326hp265kW / 360hp2979cm³B58 B30 A07.15 - BMW 3er (G20)M340i xDrive275kW / 374hp285kW / 387hp2998cm³B58B30B07.20 - BMW 4er (F32/F33/F36)440i / xDrive240kW / 326hp265kW / 360hp2979cm³B58 B30 A03.16 - 05.21 BMW 4er (G22)M440i xDrive275kW / 374hp285kW / 387hp2998cm³B58B30B07.20 - BMW 5er (G30/G31)540i / xDrive250kW / 340hp265kW / 360hp2998cm³B58 B30 A, B58 B30 C09.16 - 07.19 BMW 5er (G30/G31)545e xDrive290kW / 394hp2998cm³B58 B30 C11.20 - BMW 6er (G32)640i / xDrive250kW / 340hp265kW / 360hp2998cm³B58 B30 A, B58 B30 C06.17 - 07.19 BMW 7er (G11/G12)740i / xDrive245kW / 333hp250kW / 340hp2998cm³B58 B30 C03.19 - BMW 8er (G14/G15/G16)840i / xDrive245kW / 333hp250kW / 340hp2998cm³B58 B30 C07.19 - BMW X3 (G01)xDrive M40i260kW / 354hp265kW / 360hp285kW / 387hp2998cm³B58 B30 A, B58 B30 B08.17 - 10.19 BMW X4 (G02)xDrive M40i260kW / 354hp265kW / 360hp285kW / 387hp2998cm³B58 B30 A04.18 - BMW X5 (G05)xDrive 40i250kW / 340hp280kW / 381hp2998cm³B58 B30 C08.18 -04.23 - BMW X5 (G05)xDrive 45e235kW / 320hp290kW / 394hp2998cm³B58 B30 C06.19 - BMW X6 (G06)xDrive 40i250kW / 340hp2998cm³B58 B30 C08.19 - 03.23 BMW X7 (G07)xDrive 40i250kW / 340hp2998cm³B58 B30 C03.19 - BMW Z4 (G29)M40i250kW / 340hp2998cm³B58 B30 C11.18 - ToyotaSupra GR (A90/DB)250kW / 340hp2998cm³B5803.19 -

This wheel spacer is a push-through system with double centring. This ensures optimum driving behaviour and prevents unwanted vibrations. Technical information: - Disc thickness: 12mm per wheel (= 24mm per axle) - Bolt circle(s)*: 112/5 + 112/5 - Centre collar diameter: 66.6mm - Chamfer size PHO (standard disc - rim side): 2x45° - Hub hole depth NLT (standard disc - vehicle side): 12mm Package contents: 4 pieces incl. 20 screws *This may be a so-called double bolt circle. The item can be used for vehicles with both bolt hole circles. Compatible vehicles: BMW Vehicle designation: Year of manufacture: Type: 1 Series 2019-2024 F1H (F40) 1 Series 2024- F70 2 Series 2021- G42 2 Series Active Tourer 2014-2021 (F45) - UKL-L 2 Series Active Tourer 2017-2021 (F45) - F2GT 2 Series Active Tourer 2021- U2AT 2 Series Gran Coupe 2019- F44 2 Series Gran Coupé 2025- F74 2 Series Gran Tourer 2015-2022 (F46) - UKL-L 3 Series 2019- G20 3 Series Touring 2019- G21 4 Series Coupe, Convertible 2020- G22, G23 4 Series Gran Coupe 2021- G26 5 Series 2017-2023 (G30,G31) - G5L, G5K 5 Series 2023- (G60) - G6L 5 Series Touring 2024- (G61) - G6K 6 Series Gran Turismo 2017- (G32) - G6GT 7 Series 2015-2022 (G11/G12) - 7L 7 Series 2022- (G70) 8 Series 2018- (G14/G15/G16) i3 (incl. s) 2013- (i01) - BMWi-1 i4 2022- G26 i5 2024- (G60E) i7 2022- (G70) i8 2013-2020 (i12) - BMWi-2 iX 2021- (I20) iX3 2020- (G08 - G3XE) M2 2022- (G87) - G2M M3 (Competition) incl. Touring 2021- G80, G81 M4 (Competition) incl. Convertible 2021- G82, G83 M5 2017-2024 (F90) - F5ML X1 2015-2017 (F48) - UKL-L X1 2017-2022 (F48) - F1X X1 (incl. iX1) 2022- (U11) - U1X X2 2018-2023 (F39) X2, iX2 2024- (U10, U2X) X3 2017-2024 (G01) - G3X X3 2024- (G45) - G3XN X3 M 2019- (G3X); F34XM; F97 X4 2018- (G02) - X3 G4X X4 M 2019- (G4X); F34XM; F98 X5 2018- G05 X5 M 2019- G05 X6 2019- G06 (G6X) X6 M 2019- G06 X7 2019- G07 (G7X) Z4 2019- G29 Chrysler Vehicle designation: Year of manufacture: Type: Crossfire 2003-2007 ZH Mercedes Benz Vehicle designation: Year of construction: Type: 190E 1982-1993 201 200 - 280E incl. T and C 1977-1986 123, 123*C, *T 200 - 300 1967-1976 115 230 - 280 1967-1976 114 A-Class 1997-2004 168 A-Class 2004-2012 169 A-Class 2012-2018 176 AMG-Line A-Class 2012-2018 176, GA A-Class (incl. AMG) 2018- 177 AMG GT 2014-2021 X290 (190) AMG GT 2023- 192 AMG GT / GTC / GTS 2014-2021 197/ C190/R1EAMG B-Class 2005-2011 245* B-Class 2011-2018 246 B-Class 2018- 247 C-Class 1993-2000 202, HO C-Class 2007-2014 204, 204K C-Class 2021- R2CW, W206 C-Class Coupe 2011-2015 204 AMG-Line C-Class Coupe 2011-2015 204 C-Class incl. Estate and Coupe 2000-2007 203, 203K, 203CL C-Class incl. Coupe 2014-2021 204, 204K, 204 AMG, 204 K AMG (205) C-Class estate incl. All-Terrain 2021- R2CS, S206 C43, C63 (S) AMG incl. Coupe 2015-2023 204, 204K, 204 AMG, 204 K AMG (205) CL S-Class 1999-2006 215 CL-Class 1991-1998 C140 CL-Class 2006-2013 216 CLA 2013-2018 117, 245G CLA 2015-2018 Shooting Brake X117, 245G CLA (incl. AMG 45/S) 2019- C118 (F2CLA) CLA Shooting Brake (incl. AMG 45/S) 2019- X118 (F2CLA) CLE 2023- 236 CLK-Class 1997-2003 208 CLK-Class 2002-2010 209 CLS-Class 2004-2010 219 CLS-Class 2011-2018 218 CLS-Class 2018-2023 257 E-Class 2002-2009 211, 211K E-Class 2009-2016 212, 212K E-Class 2016-2023 213 E-Class 2023- W214 (R2EW) E-Class (except 4matic) 1995-2002 210, 210K E-Class All-Terrain 2017-2023 R1ES - (S213) E-Class Cabriolet 2017-2023 A238/R1EC E-Class Coupe 2009-2017 207 E-Class Coupe 2016-2023 C238 E-Class incl. estate and convertible 1985-1996 124 E-Class Estate (incl. All Terrain) 2023- S214 (R2ES) EQA 2021- DB, F2B, H243 EQB 2021- X243 (F2B) EQC 2019-2023 N293, 204X EQE 2022- V295 EQE SUV 2022- X294 EQS 2020- V297 EQS SUV 2022- X296 EQV 2020- W447 GL-Class 2006-2012 G164 GL-Class 2012-2015 166 GLA-Class 2013-2020 X 156 GLA-Class 2020- H 247 GLB-Class 2019- X247 (F2B) GLC-Class 2022- (X254) GLC-Class incl. Coupe 2015-2022 (X253) - 204 X GLE-Class incl. Coupe 2015-2019 (C292) - 166 GLK-Class 2008-2015 X204 GLS-Class 2015-2019 X 166 M-Class 1997-2005 163 M-Class 2005-2011 164 M-Class 2011-2015 166 R-Class 2005-2017 251 S-Class 1972-1980 116 S-Class 1979-1991 126, 126C S-Class 1991-1998 140 S-Class 1998-2005 220 S-Class 2005-2013 W221 AMG-Line S-Class 2005-2013 W221 S-Class 2013-2020 222 S-Class 2020- W223 (R2S) S-Class Cabriolet 2014-2020 (A217) - 221 S-Class Cabrio AMG 2014-2020 (A217) - 221 AMG-Line S-Class Coupe 2014-2020 (C217) - 221, 221AMG SL 1974-1985 107 (MK I) SL 1985-1989 107 (MK II) SL-Class 1989-2001 129 SL-Class 2001-2011 230 SL-Class 2012-2020 231 SL-Class 2021- 232 SLC-Class 2016-2020 R 172 SLK-Class 1996-2004 R 170 SLK-Class 2004-2011 R 171 SLK-Class 2011-2016 R 172 SLS 2009-2014 197 V-Class, Vito 1996-2003 1 gen (638) V-Class, Vito 2003-2014 2 gen. (639) V-Class, Vito 2014- 639/2, 639/4 (W447) Vaneo 2001-2005 414 Viano 2003-2014 639 Mini Vehicle designation: Year of construction: Type: Aceman E, SE 2024- JM5 Mini Clubman 2015- (F54) Mini Cooper 2024- FM6 (F66) Mini Cooper E 2023- (J01) Mini Cooper incl. S and Convertible 2014-2024 (F56, F57) - ULK-L Mini Cooper incl. S and Convertible 2016-2024 (F56, F57) - FMCA, FML2, FML4 Mini Cooper SE 2019-2023 SE Mini Countryman 2017-2023 FMX (F60) Mini Countryman (incl. electric) 2023- UMX Mini John Cooper Works incl. Convertible 2014-2016 (F56, F57) - ULK-L Mini John Cooper Works incl. Convertible 2016-2024 (F56, F57) - FMCA Rolls Royce Vehicle designation: Year of construction: Type: Cullinan 2018- RR31 Ssangyong Vehicle designation: Year of construction: Type: Korando 2021- C300 Tivoli 2015- XK (TIVOLI / XLV 1.6) Torres 2024- J100 XLV 2016- e-XGi 160, e-XDi 160, GPL Toyota Vehicle designation: Year of manufacture: Type: Supra 2019- A90 (JTSC/JBSC) Volkswagen Vehicle designation: Year of construction: Type: Bus T2, T3 1967-1992 245, 247, 251, 253, 255 (front bolts, rear nuts)