MOVIT DDE steel brake system 396x36mm (6 piston calliper) for the front axle, from 20 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined. The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications. The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple layer of paint.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts Attention: The conversion means that only rims with at least 20 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. MOVIT sports brake callipers, 6s1, 6-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force MOVIT sports brake discs, 396x36mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Maximum fading resistance- Special alloy for high thermal conductivity MOVIT comfort brake pads, BE-6s1- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x assembly material1x installation instructions and running-in instructions1x parts certificate Compatible vehicles:Audi R8 type 420 -2018Audi S6 Type 4FBMW M2 F87BMW M3 E92BMW M4 F82BMW X5 E70Ford Mustang VI 2016- 2.3l EcoboostFord Mustang VI 5.0 V8 GT 2015-Mercedes Benz W906 Sprinter 3t & 3.5t

A powerful brake is one of the most important components in motorsport. With these upgrade kits, the necessary balance of performance, weight and durability has been perfectly combined through the uncompromising selection of materials, so that this product can meet the high demands of extreme automotive applications. To achieve this, MOV'IT has increased the diameter and thickness of the brake discs and used more cross holes. Each pre-cast hole is re-drilled and countersunk to achieve a more favourable flow. The brake disc's optimised DDE ventilation system has an 80% larger surface area compared to other brake discs, resulting in a significant reduction in temperature and wear.Without parts certificate Attention: The conversion means that only rims with at least 19 inches can be fitted! Features: - Upgrade kit front axle, 370mm, 2-piece disc, perforated - Without parts certificate Scope of delivery: - 2x brake disc perforated left/right incl. brake pot - 1x mounting material - 1x installation instructions and running-in instructions Compatible vehicles:Audi R8 (422, 423) 4.2 FSI quattro 309kW / 420PS / 4163cm³ (until 31/08/2009)Audi A4 B7 (8E) RS4 quattro 309kW / 420PS / 4163cm³Audi A6 C5 (4B) RS6 quattro 331kW / 450PS / 4172cm³Audi A6 C5 (4B) RS6 quattro plus 353kW / 480PS / 4172cm³ Notes:When installing the upgrade kit, we always recommend replacing the brake pads, as the use of used pads on new brake discs is not recommended.When installed in our factory, the conversion is carried out exclusively with new brake pads!

The Vorsteiner VRS Aero carbon front spoiler provides significantly more downforce on the front axle and ensures a racy feeling on the road. This Vorsteiner front spoiler for the Audi R8 is made of high-quality prepreg carbon and features high-quality processing of the materials in the autoclave as well as an exact fit. The front spoiler for the Audi R8 is plug & play. Certificate: Material certificate Compatible vehicles:AUDI R8 (4S3, 4SP) 5.2 FSI Since 2017AUDI R8 (4S3, 4SP) 5.2 FSI quattro Since 2015AUDI R8 Spyder (4S9, 4SR) 5.2 FSI Since 2017AUDI R8 Spyder (4S9, 4SR) 5.2 FSI quattro 2016-

Facts:Material: CarbonManufacturer: EventuriExpert opinion: without The Lamborghini Huracan / Audi R8 4S Eventuri intake system - form and function in sublime harmony. Our goal was to create a flagship intake system and set a benchmark for this platform - by using organic curves and prepreg carbon fiber, the results speak for themselves. Gone are the awkward cuboid plastic airboxes and in their place is a beautifully engineered system that allows for smoother airflow and unleashes the glorious roar of the V10 engine. Every detail has been considered, from the flawless carbon fiber with integrated MAF pipes to the heat shields and custom silicone connectors. More power, improved throttle response and an exhilarating intake sound to enhance the Huracan driving experience. The Huracan requires tuning to make the intakes work without Check Engine Light. This is due to the narrow MAF range set at the factory, which is exceeded by the higher airflow delivered by the intakes. The Eventuri DifferenceThe Huracan Eventuri system uses our patented carbon fiber housing that provides an aerodynamically efficient airflow path from the filter to the MAF pipe. Not just another cone filter with a heat shield, but a unique design that creates the Venturi effect. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Audi R8 (4S)5.2 FSI / quattro5.2 FSI / quattro5.2 FSI quattro5.2 FSI quattro397kW / 540hp419kW / 570hp449kW / 610hp456kW / 620hp5204cm³DKABCSPB, DKABCSPA, DKAADMWA Lamborghini Huracan5.2 LP 580-25.2 LP 610-25.2 LP 610-4426kW / 580hp449kW / 610hp449kW / 610hp5204cm³CSJB, DKBDGFACSJB, DKB Lamborghini HuracanLP 640-2470kW / 640hp5204cm³DGFB Lamborghini Huracan5.2 Performante470kW / 640hp5204cm³DGFB

KW HLS Hydraulic Lift System For easy driving over various obstacles for sporty cars with low ground clearance More ground clearance at the touch of a button With the HLS lift system, you can raise your sports car or lowered vehicle to safely drive over obstacles such as speed bumps, speed humps, level crossings, construction sites, garage and underground parking garage entrances. Depending on the version of the HLS lift system installed, either the front axle or both axles of your vehicle are raised hydraulically by up to 45 millimetres. This prevents your aerodynamic components, underbody protection or even the oil pan from being damaged. Depending on the vehicle type and model, the lift system is available as a vehicle-specific solution with or without KW coilover suspension. If your vehicle is not yet included in our KW HLS product range, our engineers have also developed a universal lift system. Convincing solution made by KW Our HLS is available as an application-specific solution for a wide range of super sports cars and even for compact models. All the components supplied, such as the hydraulic lines and hydraulic pump, are adapted to your vehicle and therefore all our components harmonize perfectly with your sports car. Whether you combine the HLS with your standard suspension or with our KW coilovers in stainless steel, which are among the world's top aftermarket products, is up to you to decide. Alpina, BMW M, Manthey, Mercedes-Benz AMG, Novitec Rosso and many other well-known companies in the international automotive industry have already opted for KW. The "HLS 2" version of the lift kit, which is only installed on the front axle, allows you to lift the front of your sports car. If you opt for the "HLS 4" variant, your entire vehicle will be lifted. For this purpose, a hydraulic cylinder is mounted between the spring plate and spring on each KW coilover strut. The great advantage of the hydraulic system is that there is no compression (movement) of the extended cylinder unit during driving (no unwanted additional suspension) and therefore the driving dynamics cannot be impaired. The scope of delivery for all HLS Lift Kit variants also includes a control unit that is connected to the vehicle's on-board electronics. As a result, the vehicle is automatically lowered to the original depth of the KW coilover suspension or your standard suspension from a certain speed. - as a complete solution including KW coilover suspension - or available as a retrofit kit - Actuation from inside the vehicle via button with LED position indicator or optionally via radio remote control - Can be activated while driving (up to 80 km/h) - Quick lifting in 4-5 seconds with HLS 2 - Absolutely corrosion-resistant (coated aluminum cylinder components) Please note the conditions and instructions for this product: - VA + HA height-adjustable (threaded struts) - Vehicles with electronic damper control must be decommissioned. Vehicle-specific KW decommissioning kits can be found in the accessories table. - The dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted if the piston rod is accessible. - Aluminum struts (no Inox-line) Technical info: Lowering VA/HA (mm): 10-25/15-35 Version: HLS 2 Mounting position hydraulics: VA Material coilover suspension: aluminum Height adjustment: rebound and compression Adjustment VA/HA: thread/thread Approval: parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI R8 (4S) 4S3, 42 07/2015- 5.2 FSI Coupe Petrol 419 KW 5204 ccm 10 Rear-wheel drive AUDI R8 (4S) 4S3, 42 07/2015- 5. 2 FSI quattro Coupe Petrol 397 KW 5204 ccm 10 All-wheel AUDI R8 (4S) 4S3, 42 07/2015- 5.2 FSI quattro Coupe Petrol 419 KW 5204 ccm 10 All-wheel AUDI R8 (4S) 4S3, 42 07/2015- 5.2 FSI quattro Coupe Petrol 449 KW 5204 ccm 10 All-wheel AUDI R8 (4S) 4S3, 42 07/2015- 5. 2 FSI quattro Coupe Petrol 456 KW 5204 ccm 10 All-wheel drive AUDI R8 (4S) 4S3, 42 07/2015- 5.2 FSI RWS Coupe Petrol 397 KW 5204 ccm 10 Rear-wheel drive AUDI R8 (4S) 4S3, 42 07/2015- 5. 2 GT Coupe Petrol 456 KW 5204 ccm 10 Rear-wheel drive AUDI R8 (4S) Spyder 4S9, 42 05/2016- 5.2 FSI Cabriolet Petrol 419 KW 5204 ccm 10 Rear-wheel drive AUDI R8 (4S) Spyder 4S9, 42 05/2016- 5. 2 FSI quattro Cabriolet Petrol 397 KW 5204 ccm 10 All-wheel drive AUDI R8 (4S) Spyder 4S9, 42 05/2016- 5.2 FSI quattro Cabriolet Petrol 419 KW 5204 ccm 10 All-wheel drive AUDI R8 (4S) Spyder 4S9, 42 05/2016- 5.2 FSI quattro Cabriolet Petrol 449 KW 5204 ccm 10 All-wheel drive AUDI R8 (4S) Spyder 4S9, 42 05/2016- 5.2 FSI quattro Cabriolet Petrol 456 KW 5204 ccm 10 All-wheel drive AUDI R8 (4S) Spyder 4S9, 42 05/2016- 5.2 FSI RWS Cabriolet Petrol 397 KW 5204 ccm 10 Rear-wheel drive

KW V4 coilover suspension - State of the Art With the new KW V4 with its coilover struts made of stainless steel or aluminum, you give your super sports car the necessary reserves to further increase the driving dynamics. The three-way adjustable high-performance dampers with their independent adjustment of the rebound as well as low-speed and high-speed compression damping are based on the successful racing technology of the multiple overall winner of the ADAC Zurich 24h Race Nürburgring and, depending on the vehicle-specific version, have aluminum support bearings. The new KW V4 is developed exclusively for selected high-performance vehicles, which can be moved more safely at the limits of driving dynamics thanks to our KW suspension technology. - 3-way adjustable high-performance dampers with stainless steel coilover struts - Separate and independent damper adjustment in: - Rebound damping with 16 exact clicks + (firmer) / - (more comfortable) - Low-speed compression damping with 6 exact clicks + (firmer) / - (more comfortable) - High-speed compression damping with 14 exact clicks + (firmer) / - (more comfortable) - Two basic settings ex works with comfort setting and performance setting - Depending on the vehicle, aluminum support bearings are an integral part of the scope of delivery Please note the conditions and instructions for this product: - VA + HA height-adjustable (coilover struts) - Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible. - Electronic damper control must be deactivated. - Aluminum shock absorbers (no Inox-line) Technical information: Lowering VA/HA (mm): 5-25/15-35 Version: V4 Hardness adjustment: Rebound and compression Material: Aluminum Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI R8 (4S) 4S3, 42 07/2015- 5.2 FSI quattro Coupe Petrol 397 KW 5204 ccm 10 All-wheel AUDI R8 (4S) 4S3, 42 07/2015- 5. 2 FSI quattro Coupe Petrol 419 KW 5204 ccm 10 All-wheel AUDI R8 (4S) 4S3, 42 07/2015- 5.2 FSI quattro Coupe Petrol 449 KW 5204 ccm 10 All-wheel AUDI R8 (4S) 4S3, 42 07/2015- 5. 2 FSI quattro Coupe Petrol 456 KW 5204 ccm 10 All-wheel AUDI R8 (4S) Spyder 4S9, 42 05/2016- 5.2 FSI quattro Cabriolet Petrol 397 KW 5204 ccm 10 All-wheel AUDI R8 (4S) Spyder 4S9, 42 05/2016- 5. 2 FSI quattro Cabriolet Petrol 419 KW 5204 ccm 10 All-wheel drive AUDI R8 (4S) Spyder 4S9, 42 05/2016- 5.2 FSI quattro Cabriolet Petrol 449 KW 5204 ccm 10 All-wheel drive AUDI R8 (4S) Spyder 4S9, 42 05/2016- 5.2 FSI quattro Cabriolet Petrol 456 KW 5204 ccm 10 All-wheel drive

KW V5 coilover suspension With the new KW V5 coilover suspension, KW relies on its successful motorsport suspension technology with displacement pistons and modular as well as series-connected damper valves. The KW V5 convinces in sports cars and super sports cars with a precise and fast damping without time delay. Even with short suspension travel, steering movements and minimal road bumps, the dampers and valves react directly. Compared to conventional coilover and sports suspensions in original equipment and the aftermarket, the V5 utilises our successful damper technology with displacement pistons and modular and series-connected damper valves. In addition, it offers the freedom to further adjust the standard side-mounted valves for the low and high-speed forces of the compression and rebound damping with 14 clicks each exactly to the personally desired driving behaviour. With the KW V5 coilover suspension, a continuously adjustable maximum lowering can also be selected. - 4-way adjustable high-performance dampers with aluminium coilover struts- Solid piston (displacement piston) technology- Separate and independent damper adjustment in:- Lowspeed rebound damping with 14 exact clicks + (firmer) / - (more comfortable)- High-speed rebound damping with 14 exact clicks + (firmer) / - (more comfortable)- Low-speed compression damping with 14 exact clicks + (firmer) / - (more comfortable)- High-speed compression damping with 14 exact clicks + (firmer) / - (more comfortable)- Two basic set-ups ex works with comfort setting and performance setting Please note the conditions and instructions for this product:- VA + HA height-adjustable (coilover struts)- For vehicles with electronic damper control, this must be decommissioned. Electronic kit for decommissioning is included in the scope of delivery for item variant "YES". - The dampers have easy-to-operate adjustment wheels. Due to the design, the rebound stage can only be adjusted if the piston rod is accessible.- Aluminium shock absorbers (no Inox-line) Technical information:Lowering VA/HA (mm): 5-25/15-35Version: V5Hardness adjustment: Rebound and compression stageMaterial: AluminiumAdjustment VA/HA: thread/threadApproval: Parts certificate (§19.3) Compatible vehicles:Manufacturer Model Version Body Fuel Performance Displacement Cylinder DriveAUDI R8 (4S) 4S3, 42 07/2015- 5.2 FSI Coupe petrol 419 KW 5204 ccm 10 rear-wheel driveAUDI R8 (4S) 4S3, 42 07/2015- 5.2 FSI quattro Coupe Petrol 397 KW 5204 ccm 10 All-wheel driveAUDI R8 (4S) 4S3, 42 07/2015- 5.2 FSI quattro Coupe Petrol 419 KW 5204 ccm 10 All-wheel driveAUDI R8 (4S) 4S3, 42 07/2015- 5.2 FSI quattro Coupe Petrol 449 KW 5204 ccm 10 All-wheel driveAUDI R8 (4S) 4S3, 42 07/2015- 5.2 FSI quattro Coupe Petrol 456 KW 5204 ccm 10 All-wheel driveAUDI R8 (4S) 4S3, 42 07/2015- 5.2 FSI RWS Coupe Petrol 397 KW 5204 ccm 10 Rear-wheel driveAUDI R8 (4S) 4S3, 42 07/2015- 5.2 GT Coupe Petrol 456 KW 5204 ccm 10 Rear-wheel driveAUDI R8 (4S) Spyder 4S9, 42 05/2016- 5.2 FSI Cabriolet Petrol 419 KW 5204 ccm 10 Rear-wheel driveAUDI R8 (4S) Spyder 4S9, 42 05/2016- 5.2 FSI quattro Cabriolet Petrol 397 KW 5204 ccm 10 All-wheel driveAUDI R8 (4S) Spyder 4S9, 42 05/2016- 5.2 FSI quattro Cabriolet Petrol 419 KW 5204 ccm 10 All-wheel driveAUDI R8 (4S) Spyder 4S9, 42 05/2016- 5.2 FSI quattro Cabriolet Petrol 449 KW 5204 ccm 10 All-wheel driveAUDI R8 (4S) Spyder 4S9, 42 05/2016- 5.2 FSI quattro Cabriolet Petrol 456 KW 5204 ccm 10 All-wheel driveAUDI R8 (4S) Spyder 4S9, 42 05/2016- 5.2 FSI RWS Cabriolet Petrol 397 KW 5204 ccm 10 Rear-wheel drive

The Vorsteiner VRS Aero Carbon rear diffuser for the Audi R8 is made of high-quality prepreg carbon fibre and features high-quality autoclave processing of the materials. This Vorsteiner carbon diffuser offers maximum flexibility and high stability, which ensures significantly higher downforce on the rear axle and gives the Audi R8 an absolute race feeling. The diffuser for the Audi R8 is a perfect fit and plug & play. Expert opinion: Material certificate Compatible vehicles:AUDI R8 (4S3, 4SP) 5.2 FSI quattro Since 2015AUDI R8 Spyder (4S9, 4SR) 5.2 FSI Since 2017AUDI R8 Spyder (4S9, 4SR) 5.2 FSI quattro 2016

The Vorsteiner VRS carbon rear wing for the Audi R8 V10 provides significantly higher downforce on the rear axle and ensures an absolute racing feeling on the road. The rear wing manufactured for the Audi R8 is made of high-quality prepreg carbon fibre and features high-quality autoclave processing of the materials. The rear wing from Vorsteiner is an absolute highlight on the road, and the rear wings are a perfect fit and plug & play. Expertise: Material certificate Compatible vehicles:AUDI R8 (4S3, 4SP) 5.2 FSI quattro Since 2015AUDI R8 Spyder (4S9, 4SR) 5.2 FSI quattro Since 2017