Door Set Carbon (4 pieces) | fits BMW 3 Series/M3 (G20/G80) | Aulitzky Tuning

KW coilover suspension DDC ECU KW Dynamic Damping Control ECU Individuality at the touch of a button.The KW DDC coilovers are the intelligent suspension solution for retrofitting from the KW iSuspension product range. They combine the advantages of an adaptive damping system with a vehicle-specific sporty and harmonious damper characteristic with a stylish and sporty lowering. The adaptive KW coilovers are available in the KW DDC ECU version with optional app control for vehicles without actively controlled standard suspension and as KW DDC Plug & Play version for selected vehicle models with adaptive standard suspension.The adaptive KW DDC ECU coilovers allow a stepless lowering in the tested adjustment range. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even after years. Depending on the vehicle, lowering takes place either on the wheel-guiding KW stainless steel suspension struts or, in the case of non-wheel-guiding double-wishbone rear axles, on the rear axle height adjustment. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW technology "Made in Germany".Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. It is up to five years when installed by one of our KW specialist dealers. The adaptive KW DDC ECU coilovers with app control are currently available for Audi, BMW, Mercedes-Benz, Porsche, VW and many other vehicles such as the Range Rover Evoque. - retrofittable electronic damper adjustment, combined with the advantages of a KW coilover suspension- with optional app control- Three damping setups: Comfort / Sport / Sport +- Operation via retrofit button or optional app- Create your own setups intuitively via KW DDC app KW DDC button - 1x button, 3x learn moreThe scope of delivery of the KW DDC ECU coilover kit also includes a KW DDC button. This allows you to select the KW DDC driving modes "Comfort", "Sport" and "Sport+" directly from the cockpit. The KW DDC button changes the colour to match the KW DDC APP. W-LAN module & app controlOptionally available app control for live suspension tuning via iPhone, iPod Touch, iPad.Experience top-class innovation and quality "Made in Germany": the KW DDC (Dynamic Damping Control) coilover suspension with ECU (Electronic Control Unit). The coilover suspension with its electronically adjustable dampers enables intelligent suspension tuning via app control and is already available for numerous vehicles without adaptive standard suspension.This allows you to upgrade your vehicle with adaptive damper control and optionally adapt it to your driving style via the KW DDC app. You do not need any tools or have to work on the dampers yourself.The free KW DDC App in combination with our optionally available W-Lan module is your tool to carry out an individual damper tuning live and in real time. Please note the conditions and instructions for this product:- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) Technical information:Lowering VA/HA (mm):5-30/0-30Version: DDC - ECUHardness adjustment: Rebound and compression stageMaterial: Stainless steelAdjustment VA/HA: thread/threadApproval: Parts certificate (§19.3) Compatible vehicles:Manufacturer Model Version Body Fuel Performance Displacement Cylinder DriveMERCEDES-BENZ C-KLASSE T-Model (S204) 204 K, 204 K AMG 08/2007-08/2014 C 63 AMG Estate Petrol 373 KW 6208 ccm 8 Rear-wheel driveMERCEDES-BENZ C-KLASSE T-Model (S204) 204 K, 204 K AMG 08/2007-08/2014 C 63 AMG Estate Petrol 383 KW 6208 ccm 8 Rear-wheel driveMERCEDES-BENZ C-CLASSE T-Model (S204) 204 K, 204 K AMG 08/2007-08/2014 C 63 AMG (204.277) Estate Petrol 336 KW 6208 ccm 8 Rear-wheel driveMERCEDES-BENZ C-CLASSE T-Model (S204) 204 K, 204 K AMG 08/2007-08/2014 C 63 AMG (204.277) Estate petrol 358 KW 6208 ccm 8 rear-wheel drive

KW V4 Clubsport coilover suspension incl. support bearings incl. decommissioning for electric dampers With an uncompromising technology transfer from racing to the road, the KW Clubsport coilovers are convincing. The KW Clubsport coilovers convince with their uncompromising combination of high-end racing technology with maintenance-free KW original equipment components and expertises. This gives you the ideal accessories to realise the full potential of your sports car at trackdays, sports driver training courses, tourist drives on Grand Prix circuits and on the Nürburgring Nordschleife. Developed for the toughest racetrack in the world: the Nürburgring Nordschleife Even in their basic set-up, KW Clubsport coilovers are tuned to the different track surfaces, steep bends, jumps and chicanes of the 20.8 kilometre long Nürburgring Nordschleife. After all, as one of the most successful suspension manufacturers and suppliers in motorsport, we are at home on the Nordschleife. In the VLN Endurance Championship alone, we equip over 70 racing teams and, as a suspension manufacturer, have been able to support six overall victories at the ADAC Zurich 24h Race Nürburgring in ten years. The winner of the ADAC GT Masters 2011 also relies on our racing expertise, from which the KW Clubsport coilovers benefit. The basic setup of the KW V3 Clubsport and KW V4 Clubsport with separate expansion tank, which is perfectly adapted to the Nordschleife, allows you to customise your sports car even more individually to the desired sports tyre setup thanks to the numerous adjustment options. KW V4 Clubsport coilover suspension The vehicle-specific basic setup of the KW V4 Clubsport, developed in numerous test and measurement drives on the Nordschleife and the KW 7-post driving dynamics test bench, can be further adapted to your wheel loads, vehicle weight and the modified body stiffness, for example with a bolted cage, welded-in safety cell or strut braces, using the click adjustment. Similar to the KW Competition racing suspensions used in international motorsport, the KW V4 Clubsport coilover suspension allows the compression damping to be fine-tuned separately in the low-speed and high-speed range. The click adjustment of the patented KW two-valve control takes place directly on the expansion tank. You can vary the low-speed compression damping by hand with six precise clicks on the purple-coloured adjustment wheel. The gold-coloured adjustment wheel underneath allows you to change the high-speed compression stage of the recommended basic setup for your track day with 14 exact clicks. Independently of this, you still have 16 clicks at your disposal to noticeably adjust the rebound setting. If you want to tune the KW V4 Clubsport coilover suspension, which is available with an expert opinion, more comfortably for your journey to the Nordschleife or other race track for driving on the motorway, simply reduce the rebound forces via the rebound damping. - freely adjustable damping technology with 16 precise clicks in the rebound stage - adjustable compression damping with 6 clicks in the low-speed range and 14 exact clicks in the high-speed range - infinitely variable lowering - Tested adjustment range - high-quality components for a long service life - unique, independently acting damping force adjustment available with aluminium Unibal support bearings for technically sensible applications Setup: Application range and damper tuning The KW V4 Clubsport coilover suspensions impress with their vehicle-specific setup for trackday events on the Nürburgring Nordschleife, as well as the possibility of quickly adapting these suspensions to other racetracks and individual performance sports cars. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + dampers) - Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible. - Electronic damper control must be deactivated. Electronic kit for deactivation is included in the scope of delivery. - Clubsport suspension with support bearing: only available with VA support bearing Technical information: Lowering VA/HA (mm): 20-45/20-45 Version: V4 Clubsport Height adjustment: Rebound and compression damping Material: Stainless steel Adjustment VA/HA: thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive BMW 2 Series Coupe (F22, F87) 1C, M3 10/2012- M2 CS Coupe Petrol 331 KW 2979 ccm 6 Rear-wheel drive

Designed and engineered with the OEM standard as the frame, these AutoTecknic dry carbon fibre wing trims are made with 100% dry carbon fibre composite material and fused with abs tabs that result in strong tabs throughout the durable construction for a secure and seamless fit. As an AutoTecknic standard, each trim piece is individually manufactured with precision, resulting in superior paint quality to accentuate any vehicle. The name of dry carbon fibre comes from its manufacturing process. Dry carbon fibre is formed by using a "pre-impregnated" or impregnated piece of carbon material. This piece of carbon is first placed in a mould and then placed in a sealed autoclave to cure properly. This method produces the least amount of waste and forms a lighter version of the carbon than the "wet" method. The autoclave vacuuming process in the production of dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest quality version of carbon fibre products produced. Package includes one pair (passenger and driver side) as a direct OEM replacement for wing liners. Note: The emblems shown in the photos are for demonstration purposes only. The emblems are not included in the package. Original emblems can be reused, or new emblems could be purchased through other suppliers. Compatible vehicles:BMW 3 (F30, F80) M3 2014-2018BMW 3 (F30, F80) M3 CS 2018-2018BMW 3 (F30, F80) M3 Competition 2016-2018BMW 4 Convertible (F33, F83) M4 2014-2020BMW 4 Convertible (F33, F83) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 2014-2020BMW 4 Coupe (F32, F82) M4 CS 2017-2019BMW 4 Coupe (F32, F82) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 GTS 2016-2019

The Wagner Tuning intercooler kit EVO III Competition fits the following vehicles with N54 & N55 engines:BMW 335 (x)i E90/E91/E92/93 2006-2011 (without ACC)BMW 335is E92 2009-2013 (without ACC)BMW 135i E82/E88 2007-2013 (without ACC / not in combination with M-Performance front bumper)BMW 1 SeriesM E82 2011-2013 (without ACC) Prepare to push the performance limits of your vehicle with our EVO 3 high performance intercooler kit. Designed to meet the demanding requirements of high performance tuning levels, this kit will provide you with an impressive level of performance enhancement and cooling. Measuring 510mm x 303mm x 180mm (stepped 20.65L), our high performance intercooler offers an impressive 162% larger flow area and a whopping 182% more charge air volume compared to the stock intercooler. This means a significant improvement in the cooling capacity and performance of your vehicle. At the heart of this intercooler is our high quality Tube Fin mesh with internal turbulators. This mesh ensures efficient heat transfer and optimizes airflow for maximum cooling. Despite its impressive size, the intercooler only weighs a light 13.2kg. The end boxes of the intercooler are made of cast aluminium and have been optimized with the help of flow analyses in the CFD system. This guarantees outstanding cooling performance with minimal back pressure. The inlets and outlets of the intercooler have been enlarged to Ø70mm to ensure maximum air flow. Our EVO 3 kit includes everything you need for installation, including reinforced silicone hoses. Replacement with the standard intercooler is simple and straightforward (plug-and-play). The anti-corrosion coating with heat conduction properties ensures long-lasting and optimum cooling. This kit was developed for the highest performance requirements and is tested and pressure-stable up to 6 bar. We place great emphasis on quality and constantly monitor our products to ensure they meet the highest standards. Prepare to dominate the road and take your vehicle to a new level of performance. With our EVO 3 high-performance intercooler kit, you are guaranteed breathtaking driving experiences. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 162% larger inflow area- 182% more charge air volume- Inlets and outlets of the intercooler have been extended to Ø70mm- Plug & Play Scope of delivery:1 intercooler2 silicone hoses1 aluminum adapter1 mounting material1 assembly instructionAttention: Not approved in the area of the StVZO.

KW V1 coilover suspension Sportiness paired with outstanding looks. With factory pre-configured damping.Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car. Stepless loweringThe KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, the lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or on the rear axle height adjustment for non-wheel-guiding double-wishbone rear axles. The benchmark for sporty, dynamic tuning fansWith its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to increase your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasureAs a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, this warranty is valid for up to five years. - Optimally adjusted in advance- sporty and harmonious damping technology- Stainless steel technology "inox-line"- Individually height-adjustable- Tested adjustment range- Ready-to-install complete solution- High-quality components for a long service life- Complete documentation for easy handling Setup - factory pre-configured damping setupThe KW V1 has a vehicle-specific, permanently configured damper setup. The spring and the damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving. Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. The KW V1 is particularly interesting for tuning enthusiasts who prioritise the show & shine concept. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) - When used with standard wheel/tyre combinations, additional standard wheel spacers from the accessories may be required Technical information: Lowering VA/HA (mm): 10-40/15-45 Design: V1 Hardness adjustment: none Material: stainless steel Adjustment VA/HA: thread/thread Approval: parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive FORD FOCUS II (DA_) 07/2004-09/2013 2.5 ST Hatchback Petrol 166 KW 2522 ccm 5 Front-wheel drive

The Competition intercooler kit EVO III is suitable for the following vehicles:BMW 335d E90/91/92/93 (2005-2013)* (without ACC)*Adaptations to the vehicle are necessary (see installation instructions). Only suitable for vehicles without ACC unit. Unleash the full potential of your vehicle with the EVO3 high performance intercooler. This radiator exceeds all expectations with net dimensions of 510mm x 303mm x 180mm (stepped to 20.65L). Compared to the standard intercooler, it offers an impressive 133% larger flow area and a whopping 183% more charge air volume. Our Competition high performance mesh is a masterpiece of engineering, a Tube Fin mesh with internal turbulators that takes air cooling to a new level. Despite its size, this cooler surprises with a total weight of only 13.2 kg. The EVO 3 intercooler kit was developed specifically for the extreme requirements of the largest tuning stages. Original click connections are a thing of the past, instead we offer generous connection diameters of Ø70 mm, supported by reinforced silicone hoses. The result? Excellent cooling with minimal back pressure. All our intercoolers have an anti-corrosion coating that not only prevents corrosion but also offers excellent heat conduction properties. This guarantees a long-lasting and optimum cooling performance with a noticeable increase in power. This kit is completely ready to install and can be easily replaced with your standard intercooler. However, due to its size, some minor adjustments to the radiator support are required. This intercooler has been tested to up to 6 bar and is absolutely pressure stable. You can rely on the quality of our products. Whether on the race track or on the road, the EVO 3 high-performance intercooler is designed for racing and offers the performance and cooling you need. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 133% larger inflow area- 183% more charge air volume- connection diameter of Ø70 mm- minimal back pressure- Plug and Play Mains OEM intercooler:V = 7.29 LA = 663 cm² Mains Wagner Tuning intercooler:V = 20.65 LA = 1545 cm² Scope of delivery:1 intercooler (black coated)3 silicone hoses1 aluminium adapter (black anodized)1 aluminium charge air pipe (black anodized)1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.