MOVIT DDE steel brake system 370x35mm (6 piston calliper) for the front axle, from 18 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined. The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications. The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple paint finish.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts Attention: The conversion means that only rims with at least 18 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. MOVIT sports brake callipers, 6s5, 6-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force MOVIT sports brake discs, 370x35mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Maximum fading resistance- Special alloy for high thermal conductivity MOVIT comfort brake pads, BE-6s1- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x assembly material1x installation instructions and running-in instructions1x parts certificate Compatible vehicles:BMW 1 Series F20 / F21 (also M)Ford Focus RS CB4 / MKIIAudi RS3 8PAudi RS4 B5Audi S4 Type 8D / B5BMW M3 E46BMW M3 E46 CSLBMW M3 E92Ford Mustang V Shelby GT 500Mercedes Benz W639 Vito / VianoVolvo XC90 1st gen. from 2011 onwardsVW Golf VII GTI / GTD 57 series pistonsVW Golf VII GTI / GTD 57 series pistonsVW GOLF VII GTI Clubsport / Performance 60 series pistonsVW Golf VII RVW Golf VII RVW T5 / T6 Multivan

MOVIT DDE steel brake system 396x36mm (6 piston calliper) for the front axle, from 20 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined. The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications. The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple layer of paint.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts Attention: The conversion means that only rims with at least 20 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. MOVIT sports brake callipers, 6s1, 6-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force MOVIT sports brake discs, 396x36mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Maximum fading resistance- Special alloy for high thermal conductivity MOVIT comfort brake pads, BE-6s1- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x assembly material1x installation instructions and running-in instructions1x parts certificate Compatible vehicles:Audi R8 type 420 -2018Audi S6 Type 4FBMW M2 F87BMW M3 E92BMW M4 F82BMW X5 E70Ford Mustang VI 2016- 2.3l EcoboostFord Mustang VI 5.0 V8 GT 2015-Mercedes Benz W906 Sprinter 3t & 3.5t

The intercooler upgrade kit is suitable for:Ford Fiesta ST180 1,6l EcoBoostFord Fiesta ST200 1.6l EcoBoost Maximize the performance of your Ford Fiesta ST180 or ST200 1.6l EcoBoost with our high performance intercooler upgrade kit! Your Ford Fiesta ST deserves the best, and our high performance intercooler kit will ensure you get just that. Here's what you can expect: With mesh dimensions of 670mm x 270mm x 70mm (stepped), our intercooler offers an amazing 100% larger flow area compared to the factory radiator. This means more fresh air for your engine and a noticeable increase in performance. More charge air volume: Our kit offers an astonishing 113% more charge air volume than the standard cooler. This leads to improved combustion and ultimately more power and efficiency. Quality meets lightness: Despite its impressive size, our intercooler weighs just 6.8 kg. The end boxes of the cooler are made of cast aluminium and have been optimized for the best possible internal airflow using CAD designs. This guarantees optimum airflow and minimizes back pressure. Optimum cooling: Our Competition high performance mesh is a high quality tube fin mesh with internal turbulators that provides excellent cooling properties. All our intercoolers have an anti-corrosion coating with excellent heat conduction properties to ensure long-lasting and optimal cooling. Easy installation: Our kit is designed for easy installation and is a plug-and-play upgrade. You can easily replace your original intercooler with our kit. No complex adjustments required. Our kit is ideal for racing and has been developed to meet the high demands of Ford Fiesta ST180 and ST200 drivers. We subject all our products to rigorous quality control to ensure they meet the highest standards. Don't miss the chance to take the performance of your Ford Fiesta ST to a new level. Visit our website for more information and to order your kit. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 100% larger inflow area- 113% more charge air volume- Minimal back pressure- Plug & Play upgrade Dimensions original intercooler:690mmx130mmx50mmV=4,5literA=900qcm Dimensions Wagner Tuning EVO1 intercooler:670mmx270mmx70mm/gestuftV=9,6literA=1800qcm Scope of delivery:1 intercooler black coated1 mounting material1 installation instructionAttention: Not approved in the area of the StVZO.

Competition intercooler kit for Ford Fiesta ST MK8 / Puma ST suitable for the models:Ford Fiesta ST 147KW/200PS (from 2018)Ford Puma ST 147KW/200PS (from 2019)**Minimal adjustments to the vehicle necessary (see installation instructions) Unleash the full power and potential of your Ford Fiesta ST / Puma ST with the Wagner Tuning high-performance intercooler. This outstanding kit is designed to make your racing dreams come true and give you the ultimate driving experience. The high performance intercooler features the innovative competition mesh (Tube Fin) with the dimensions 620 mm x 390 mm x 56 mm. With an impressive outer mesh volume of 13.5 litres, this intercooler offers an astonishing 150% larger front flow area and an incredible 86% more outer mesh volume compared to the standard intercooler. Feel the difference and experience a significant increase in performance for your Ford Fiesta ST / Puma ST. The cast aluminium end boxes have been precisely developed in CAD and optimised using CFD simulations to ensure ideal internal airflow. A specially integrated air duct in the radiator inlet ensures even filling of the intercooler network and maximum cooling properties with minimum back pressure. The newly developed competition high-performance network also ensures sufficient airflow to neighbouring components such as the water cooler and is particularly lightweight despite its performance. This kit is perfect for racing and enables optimum cooling of the supercharged air. In addition, the Wagner Tuning high-performance intercooler is equipped with a high-quality anti-corrosion coating, which offers excellent heat conduction properties and protects the radiator from environmental influences. This ensures a long-lasting and optimum cooling effect. Installation is easy using the original mounting points and is straightforward thanks to the "plug and play" design. You can rely on the outstanding quality of our products, which are subject to continuous quality monitoring. Experience the impressive performance level and improved drivability with the Wagner Tuning high-performance intercooler and take your vehicle to the next level of performance. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 150% larger inflow area- 86% more net volume- Inlet diameter Ø67 mm (OEM click connection); outlet diameter Ø61 mm (OEM click connection)- Plug and Play Mesh OEM intercooler:690 mm x 140 mm x 75 mmV = 7.25 LITRESA = 966 cm² Mesh Wagner Tuning intercooler:620 mm x 390 mm x 56 mmV = 13.5 LITRESA = 2418 cm² Scope of delivery:1 intercooler1 mounting material1 parts certificate + installation instructions With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

The Competition intercooler kit fits the following vehicles:Ford Focus MK3 1.6 EcoBoost Conquer the road with the Competition high-performance intercooler kit for the Ford Focus MK3 Ready to take the performance of your Ford Focus MK3 to a new level? The Competition High Performance Intercooler Kit is the ultimate answer to your performance needs. With cutting-edge technology and bespoke design, this intercooler not only offers more power, but also an exciting driving experience. With mesh dimensions of 640mm x 200mm x 110mm (14,080cc), this intercooler offers an impressive 21% larger flow area and an astonishing 235% more charge air volume compared to the standard intercooler. These factors result in a dramatic increase in your performance and improved cooling capacity. The Competition high performance mesh not only boasts first-class cooling performance, but also ensures sufficient airflow to neighboring components. Despite its impressive performance, this intercooler weighs just 10.3 kg. The free-form cast aluminum end boxes developed in CAD ensure the best possible internal air flow. The result is an intercooler with significantly less back pressure compared to the standard model. All our intercoolers are equipped with an anti-corrosion coating that not only protects against environmental influences, but also has outstanding heat conduction properties. This ensures optimum cooling and a noticeable increase in performance. This kit is completely ready to install and enables uncomplicated replacement with the standard intercooler. A true plug-and-play experience that saves time and effort. We place the highest value on quality and safety. All our products are subject to rigorous quality control to ensure that they meet the highest standards. The Wagner Tuning intercooler has been tested under extreme conditions and is pressure stable up to 6 bar, making it ideal for racing. Put an end to power bottlenecks. Get the Competition high-performance intercooler kit and experience how your Ford Focus MK3 awakens to unimagined power. Now available for your Ford Focus MK3. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 21 % larger inflow area- 235 % more charge air volume- Connection diameter: Ø50 mm on both sides- Less back pressure- Plug & Play Dimensions original intercooler:660mm x 160mm x 40mmV=4.2 litersA=1056cm² Wagner Tuning intercooler dimensions:640mm x 200mm x 110mmV=14.08 litersA=1280 cm² Scope of delivery:1 intercooler1 mounting material1 assembly instructions Attention: Not approved in the area of the StVZO.

The Competition intercooler kit fits the following vehicle:Ford Focus MK3 RS 257kW/350hp Ready for victory: The Wagner Tuning Competition high-performance intercooler for your Ford Focus Mk3. Do you strive for ultimate performance and unsurpassed power increase? Our Competition high performance intercooler is the answer you're looking for. Here's what you can expect: This intercooler offers mesh dimensions of 630mm x 215mm x 125mm and an impressive total volume of 16,931cm³. This means a staggering 10% larger flow area and a whopping 72% more charge air volume compared to the factory intercooler. Our competition high-performance mesh is specially designed to maximize cooling performance. Even under demanding conditions, this mesh ensures that your supercharged air stays as cool as possible. Despite offering impressive performance, our intercooler is surprisingly lightweight, weighing in at just 9.2 kg. This minimizes additional ballast and helps improve overall performance. The end boxes of the intercooler are made of cast aluminium and have been optimized in the CAD system using flow analyses. Integrated air baffles at the inlet ensure that the charge air cooler is filled evenly. The connection diameters at the inlet and outlet have been increased to a generous 70 mm. Our kit also includes two reinforced silicone hoses. The result: excellent cooling properties with minimal back pressure. This kit has been specially developed for racing and is the perfect choice for enthusiasts looking for top performance. It is fitted to the factory mounting points and is essentially a 1:1 replacement. Installation is straightforward and quick. Like all our products, our intercoolers undergo strict quality control. You can rely on the highest quality. Advantages of the Wagner Tuning intercooler:- Improved cooling performance- 10% larger inflow area- 72% more charge air volume- Inlet and outlet extended to 70mm- Original mounting point (plug & play) Prepare your Ford Focus Mk3 for victory. Install our Competition high performance intercooler today and experience the power it unleashes. For more information and to order, visit our website. Dimensions original intercooler:615mm x200mm x 80mmV=9.84 litersA=1230 cm² Wagner Tuning intercooler dimensions:630mm x 215mm x125mmV=16.9 litersA=1355 cm² Scope of delivery:1 intercooler2 silicone hoses1 mounting material1 assembly instructionAttention: Not approved in the area of the StVZO.

The Competition intercooler kit fits the following vehicles:Ford Focus MK3 ST250 2,0L 184KW/250hp (2012+) Unleash the true power of your Ford Focus MK3 with our Competition high performance intercooler kit! Your Ford Focus MK3 deserves the best, and our Competition High Performance Intercooler Kit will ensure you get just that. Here's what you can expect: With mesh dimensions of 640mm x 200mm x 110mm, our intercooler offers an impressive 24% larger flow area compared to the factory radiator. This means your engine gets more air, resulting in a noticeable increase in power.Our kit offers an astonishing 60% more charge air volume than the stock radiator. This leads to improved combustion and ultimately more power and efficiency. Despite its impressive size, our intercooler weighs only 10.5 kg. The radiator's end boxes are made of cast aluminium and have been optimized for the best possible internal airflow using CAD designs. This guarantees optimal airflow and minimizes back pressure. Our competition high performance mesh is specially developed to provide excellent cooling characteristics. All our intercoolers have an anti-corrosion coating with excellent heat conduction properties to ensure long-lasting and optimal cooling. Installation is carried out by replacing the OEM intercooler and is easy to perform. No complex adjustments required. Our kit is completely ready to install and allows for a smooth plug-and-play experience. If you're out on the track or simply want to get the maximum performance out of your Ford Focus MK3, this kit is the right choice. We subject all our products to rigorous quality control to ensure they meet the highest standards. Don't miss the chance to take the performance of your Ford Focus MK3 to a new level. Visit our website for more information and to order your kit. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 24% larger inflow area- 60% more charge air volume- flow-optimized- minimized back pressure- Plug & Play Scope of delivery:1 intercooler1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.

The Competition intercooler kit is suitable for:Ford Ranger PX2 2,2TDCi (96KW-125KW/130-170hp) 2016-2019 Experience an increase in performance and improved cooling with the Wagner Tuning Competition high-performance intercooler for the Ford Ranger. With an innovative competition mesh (Tube Fin) and impressive dimensions of 660 mm x 282 [254] mm x 120 [65] mm [stepped], this intercooler offers an external mesh volume of 21.3 litres. This means a 32% larger frontal inflow area and an incredible 279% more external net volume compared to the standard intercooler. The cast aluminium end boxes were developed in CAD design and optimised using CFD simulations to ensure ideal internal airflow. Thanks to special air routing in the radiator inlet, an even filling of the intercooler network is achieved. The result is outstanding cooling properties with minimal back pressure. In addition, the innovative competitive high-performance network ensures sufficient airflow for neighbouring components such as the water cooler and is also very lightweight. You can look forward to optimum cooling of the supercharged air and a noticeable increase in performance! Our Wagner Tuning intercoolers are provided with a high-quality anti-corrosion coating that offers excellent heat conduction properties. As a result, they are optimally protected against environmental influences and guarantee a long-lasting and optimum cooling effect. Installation is very simple at the original mounting points and is a plug-and-play process. You do not need any additional adjustments. At Wagner Tuning, we continuously attach great importance to quality monitoring in order to offer you the best possible product quality. Discover the Wagner Tuning Competition high performance intercooler now and experience a new dimension of performance and cooling for your Ford Ranger. Get your vehicle ready for impressive driving experiences! Advantages of the Wagner Tuning intercooler:- improved cooling performance- 32% larger inflow area- 279% more net volume- flow-optimised airflow- Plug & Play Inlet diameter Ø60 mmOutlet diameter Ø60 mm OEM intercooler:670 mm x 210 mm x 40 mmV = 5.62 LITRESA = 1407 cm² Wagner Tuning intercooler:660 mm x 282 [254] mm x 120 [65] mm [stepped]V = 21.3 LITRESA = 1861 cm² Scope of delivery:1 intercooler2 silicone hoses1 mounting material1 installation instruction Attention: Not authorised in the area of the StVZO.

Competition intercooler kit fits for:Ford Ranger PX2 3,2TDCi (147kW/200hp) 2015-2019[for pre-facelift models slight modifications to the intercooler grille are necessary] Boost the power and performance of your Ford Ranger diesel engine with the Wagner Tuning high performance intercooler. This impressive kit has been specially developed to meet the requirements of the Ford Ranger and will make your off-road adventures even more exciting. The high performance intercooler features a new competition core (Tube Fin) with the dimensions 660 mm x 282 [254] mm x 120 [65] mm [stepped]. This core offers a 32% larger front surface area and a 279% larger core volume compared to the standard intercooler. Feel the difference and experience improved performance with your Ford Ranger. The cast aluminum tanks were precisely designed in CAD and optimized in CFD simulations to ensure ideal internal airflow. An integrated air duct in the intercooler inlet ensures even filling and maximum cooling performance. The result is an outstanding cooling effect with minimal back pressure. The newly developed competition high-performance core is also particularly lightweight and ensures sufficient airflow to the adjacent components such as the water cooler. Enjoy optimum cooling of the supercharged air and experience a significant increase in performance. The Wagner Tuning high-performance intercooler is equipped with a high-quality anti-corrosion coating that offers excellent thermal conductivity and protects the intercooler from environmental influences. This ensures long-lasting and optimum cooling performance. Installation is carried out by replacing the standard intercooler and is easy to perform (plug and play). You can rely on our products, which are subject to continuous quality monitoring. Increase the performance of your Ford Ranger and be inspired by the impressive performance and cooling capacity of the Wagner Tuning high-performance intercooler. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 32% larger inflow area- 279% more net volume- Inlet diameter Ø60 mm (OEM click connection); outlet diameter Ø60 mm (OEM click connection)- Plug and Play Mesh OEM intercooler:670 mm x 210 mm x 40 mmV = 5.62 LA = 1407 cm² Mesh Wagner Tuning intercooler:660 mm x 282 [254] mm x 120 [65] mm [stepped]V = 21.3LA = 1861 cm² Scope of delivery:1 intercooler2 silicone hoses1 mounting material1 installation instructionAttention: Not approved in the area of the StVZO.

The Competition intercooler kit is suitable for:Ford Ranger Raptor 157KW / 213hp (05/2019-12/2021)*.*Not suitable for year of manufacture 01/2022-02/2023 Discover the new benchmark for high-performance intercoolers with our impressive model. With impressive net dimensions of 650 mm x 368 mm x 95 mm (stepped) and a voluminous total capacity of 20.8 liters, the Wagner Tuning high-performance intercooler offers a 48% larger flow area and an impressive 108% more charge air volume compared to the original. Experience the power of improved cooling and feel the performance boost in your vehicle. Our innovative competition high-performance mesh allows an unobstructed airflow to neighboring components such as the water cooler and thus ensures optimum cooling. The high-quality Tube Fin mesh with internal turbulators ensures efficient heat transfer. The intercooler end boxes have been carefully crafted from cast aluminium and optimized using CFD flow analysis. The strategically placed air baffles in the inlet area ensure that the charge air cooler is filled evenly. The result is outstanding cooling properties with minimal back pressure. This kit is perfect for racing and will exceed your expectations. All our intercoolers have a high-quality anti-corrosion coating with excellent heat conduction properties. This guarantees a long-lasting and optimal cooling performance, which is accompanied by a significant increase in performance. The combination of our new Competition high-performance mesh and the crossbar forms a stable unit that is remarkably light, weighing just 12 kg. Installation is effortless at the original mounting points and requires no complex conversion. Our high-performance intercooler has been pressure-tested up to 6 bar and has proven to be absolutely pressure-stable. The quality of our products is our top priority, which is why they are subject to continuous, strict quality monitoring. With optimized internal flow rates and Ø 66 mm inlets and outlets, this high-performance intercooler ensures the best possible airflow for optimal power delivery. Prepare to unleash the full power of your vehicle and enjoy a driving experience that pushes all boundaries. Opt for our high-performance intercooler and experience the future of performance and power. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 48% larger inflow area- Flow-optimized air routing- 108% more charge air volume- Ø 66 mm inlets and outlets- Plug & Play OEM intercooler:645mm x 250mm x 62mmV=10.0 litersA=1612 cm² Wagner Tuning EVO X Competition:650mm x 368mm x 95mm [stepped]V=20.8 litersA=2392 cm² Scope of delivery:1 intercooler2 silicone hoses1 mounting material1 installation instructionAttention: Not approved in the area of the StVZO.

KW coilover suspension DDC "Plug & Play" The "Plug & Play" solution for vehicles with standard electronic damper adjustment.KW also offers you the possibility to combine the active standard damper control of your sporty vehicle with the stainless steel KW DDC Plug & Play coilover suspension. This means that you can continue to use the existing active damper control in your vehicle in conjunction with a continuously variable lowering system.The best thing about it: Apart from replacing the adaptive standard suspension with the KW DDC Plug & Play coilover suspension, no further conversion steps or even modifications to the on-board electronics are necessary. The adaptive KW dampers are simply connected to the original connectors of your car manufacturer via the KW DDC plug connection. The standard control unit then takes over the regulation and control of the KW DDC Plug & Play coilover suspension. Perfect symbiosis of an OEM control unit with the advantages of an adaptive KW coilover suspensionOur suspension technology is compatible with the electronics of various car manufacturers. This means that the adaptive KW DDC Plug & Play coilover suspension is immediately recognised by the on-board electronics. All displays and controls of your standard vehicle remain fully functional and combine the advantages of an adaptive damping system with the stylish and sporty lowering of a high-quality KW coilover suspension. Thanks to the exclusive use of rust-free stainless steel and durable components, the functionality of the rust-free KW coilovers is maintained under all weather conditions. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, adjustment is also possible after a snowy winter, for example. No oxidation occurred on the KW threaded spring legs during a salt spray test. This means that the adjustment of the stepless lowering is not affected even after years. - the plug & play solution for sportiness or more ride comfort at the touch of a button with outstanding looks thanks to stepless lowering- Compatible with the standard suspension control unit- Vehicle-specific damper set-ups such as Comfort / Normal / Sport- Operation via series buttons in the interior Please note the conditions and instructions for this product:- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper)- Only for vehicles with electronic damper control Technical information:Lowering VA/HA (mm): 30-50/25-55Version: DDC - Plug & PlayHardness adjustment: Rebound and compression dampingMaterial: Stainless steelAdjustment VA/HA: thread/threadApproval: Parts certificate (§19.3) Compatible vehicles:Manufacturer Model Version Body Fuel Performance Displacement Cylinder DriveFORD FOCUS III (DYB_) 07/2010- 2.3 RS AWD Hatchback Petrol 257 KW 2261 ccm 4 All-wheel drive

KW V1 coilover suspension Sportiness paired with outstanding looks. With factory pre-configured damping.Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car. Stepless loweringThe KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, the lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or on the rear axle height adjustment for non-wheel-guiding double-wishbone rear axles. The benchmark for sporty, dynamic tuning fansWith its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to increase your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasureAs a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, this warranty is valid for up to five years. - Optimally adjusted in advance- sporty and harmonious damping technology- Stainless steel technology "inox-line"- Individually height-adjustable- Tested adjustment range- Ready-to-install complete solution- High-quality components for a long service life- Complete documentation for easy handling Setup - factory pre-configured damping setupThe KW V1 has a vehicle-specific, permanently configured damper setup. The spring and the damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving. Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. The KW V1 is particularly interesting for tuning enthusiasts who prioritise the show & shine concept. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) Technical information: Lowering VA/HA (mm): 5-30/10-35 Version: V1 Hardness adjustment: none Material: stainless steel Adjustment VA/HA: thread/thread Approval: parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive FORD FIESTA VI (JA8_, CB1, CCN) 06/2008- 1.6 ST Hatchback Petrol 134 KW 1596 ccm 4 Front-wheel drive FORD FIESTA VI (JA8_, CB1, CCN) 06/2008- 1.6 ST200 Hatchback Petrol 147 KW 1596 ccm 4 Front-wheel drive

KW V1 coilover suspension Sportiness paired with outstanding looks. With factory pre-configured damping.Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car. Stepless loweringThe KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, the lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or on the rear axle height adjustment for non-wheel-guiding double-wishbone rear axles. The benchmark for sporty, dynamic tuning fansWith its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to increase your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasureAs a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, this warranty is valid for up to five years. - Optimally adjusted in advance- sporty and harmonious damping technology- Stainless steel technology "inox-line"- Individually height-adjustable- Tested adjustment range- Ready-to-install complete solution- High-quality components for a long service life- Complete documentation for easy handling Setup - factory pre-configured damping setupThe KW V1 has a vehicle-specific, permanently configured damper setup. The spring and the damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving. Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. The KW V1 is particularly interesting for tuning enthusiasts who prioritise the show & shine concept. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) Technical info: Lowering VA/HA (mm): 10-40/10-40 Version: V1 Hardness adjustment: none Material: stainless steel Adjustment VA/HA: thread/thread Approval: parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive FORD FOCUS I (DA1, DAW, DB1, DBW, DBY) 09/1998-11/2009 RS Hatchback Petrol 158 KW 1988 ccm 4 Front-wheel drive

KW V1 coilover suspension Sportiness paired with outstanding looks. With factory pre-configured damping.Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car. Stepless loweringThe KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, the lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or on the rear axle height adjustment for non-wheel-guiding double-wishbone rear axles. The benchmark for sporty, dynamic tuning fansWith its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to increase your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasureAs a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, this warranty is valid for up to five years. - Optimally adjusted in advance- sporty and harmonious damping technology- Stainless steel technology "inox-line"- Individually height-adjustable- Tested adjustment range- Ready-to-install complete solution- High-quality components for a long service life- Complete documentation for easy handling Setup - factory pre-configured damping setupThe KW V1 has a vehicle-specific, permanently configured damper setup. The spring and the damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving. Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. The KW V1 is particularly interesting for tuning enthusiasts who prioritise the show & shine concept. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) Technical info: Lowering VA/HA (mm): 25-50/20-45 Version: V1 Hardness adjustment: none Material: stainless steel Adjustment VA/HA: thread/thread Approval: parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive FORD FOCUS II (DA_) 07/2004-09/2013 2.5 RS Hatchback Petrol 224 KW 2521 ccm 5 Front-wheel drive FORD FOCUS II (DA_) 07/2004-09/2013 2.5 RS 500 Hatchback Petrol 257 KW 2521 ccm 5 Front-wheel drive

KW V1 coilover suspension Sportiness paired with outstanding looks. With factory pre-configured damping.Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car. Stepless loweringThe KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, the lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or on the rear axle height adjustment for non-wheel-guiding double-wishbone rear axles. The benchmark for sporty, dynamic tuning fansWith its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to increase your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasureAs a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, this warranty is valid for up to five years. - Optimally adjusted in advance- sporty and harmonious damping technology- Stainless steel technology "inox-line"- Individually height-adjustable- Tested adjustment range- Ready-to-install complete solution- High-quality components for a long service life- Complete documentation for easy handling Setup - factory pre-configured damping setupThe KW V1 has a vehicle-specific, permanently configured damper setup. The spring and the damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving. Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. The KW V1 is particularly interesting for tuning enthusiasts who prioritise the show & shine concept. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) - When used with standard wheel/tyre combinations, additional standard wheel spacers from the accessories may be required Technical information: Lowering VA/HA (mm): 10-40/15-45 Design: V1 Hardness adjustment: none Material: stainless steel Adjustment VA/HA: thread/thread Approval: parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive FORD FOCUS II (DA_) 07/2004-09/2013 2.5 ST Hatchback Petrol 166 KW 2522 ccm 5 Front-wheel drive

Bitte beachten Sie die Auflagen und Hinweise zu diesem Produkt: - VA + HA höhenverstellbar (VA Gewindefederbeine, HA Federn mit Höhenverstellung + Dämpfer) KW V1 coilover suspension Sportiness paired with outstanding looks. With factory pre-configured damping.Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car. Stepless loweringThe KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, the lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or on the rear axle height adjustment for non-wheel-guiding double-wishbone rear axles. The benchmark for sporty, dynamic tuning fansWith its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to increase your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasureAs a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, this warranty is valid for up to five years. - Optimally adjusted in advance- sporty and harmonious damping technology- Stainless steel technology "inox-line"- Individually height-adjustable- Tested adjustment range- Ready-to-install complete solution- High-quality components for a long service life- Complete documentation for easy handling Setup - factory pre-configured damping setupThe KW V1 has a vehicle-specific, permanently configured damper setup. The spring and the damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving. Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. The KW V1 is particularly interesting for tuning enthusiasts who prioritise the show & shine concept. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) Technical info: Lowering VA/HA (mm): 25-40/20-35 Version: V1 Height adjustment: none Material: stainless steel Adjustment VA/HA: thread/thread Approval: parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive FORD FOCUS III (DYB_) 07/2010- 2.0 ST Hatchback Petrol 184 KW 1999 ccm 4 Front-wheel drive FORD FOCUS III (DYB_) 07/2010- 2.0 ST Hatchback Petrol 188 KW 1999 ccm 4 Front-wheel drive FORD FOCUS III (DYB_) 07/2010- 2.0 TDCi ST Hatchback Diesel 136 KW 1997 ccm 4 Front-wheel drive

KW V1 coilover suspension Sportiness paired with outstanding looks. With factory pre-configured damping.Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car. Stepless loweringThe KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, the lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or on the rear axle height adjustment for non-wheel-guiding double-wishbone rear axles. The benchmark for sporty, dynamic tuning fansWith its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to increase your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasureAs a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, this warranty is valid for up to five years. - Optimally adjusted in advance- sporty and harmonious damping technology- Stainless steel technology "inox-line"- Individually height-adjustable- Tested adjustment range- Ready-to-install complete solution- High-quality components for a long service life- Complete documentation for easy handling Setup - factory pre-configured damping setupThe KW V1 has a vehicle-specific, permanently configured damper setup. The spring and the damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving. Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. The KW V1 is particularly interesting for tuning enthusiasts who prioritise the show & shine concept. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) Technical info: Lowering VA/HA (mm): 25-40/20-40 Version: V1 Hardness adjustment: none Material: stainless steel Adjustment VA/HA: thread/thread Approval: parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive FORD FOCUS III Turnier (DYB) 07/2010- 2.0 ST Kombi Petrol 184 KW 1999 ccm 4 Front-wheel drive FORD FOCUS III Turnier (DYB) 07/2010- 2.0 TDCi ST Kombi Diesel 136 KW 1997 ccm 4 Front-wheel drive

KW V3 Clubsport coilover suspension incl. support bearing With an uncompromising technology transfer from racing to the road, the KW Clubsport coilovers convince.The KW Clubsport coilovers convince with their uncompromising combination of high-end racing technology with maintenance-free KW original equipment components and expertises.This gives you the ideal accessories to realise the full potential of your sports car at trackdays, sports driver training courses, tourist drives on Grand Prix circuits and on the Nürburgring Nordschleife. Developed for the toughest racetrack in the world: the Nürburgring NordschleifeEven in their basic set-up, KW Clubsport coilovers are tuned to the different track surfaces, steep bends, jumps and chicanes of the 20.8 kilometre long Nürburgring Nordschleife. After all, as one of the most successful suspension manufacturers and suppliers in motorsport, we are at home on the Nordschleife.In the VLN Endurance Championship alone, we equip over 70 racing teams and, as a suspension manufacturer, have supported six overall victories at the ADAC Zurich 24h Race Nürburgring in ten years. The winner of the ADAC GT Masters 2011 also relies on our racing expertise, from which the KW Clubsport coilovers benefit.The basic setup of the KW V3 Clubsport and KW V4 Clubsport with separate expansion tank, which is perfectly adapted to the Nordschleife, allows you to adjust your sports car even more individually to the desired sports tyre setup thanks to the numerous adjustment options.In addition to optionally available adjustable support mounts, the KW Clubsport coilovers allow you to adjust the damper forces independently in the rebound and compression stages with the integrated KW V3 Clubsport coilover suspension technology like in racingWith the adjustment wheels for the rebound adjustment, you can fine-tune the recommended basic setup for your sports car and your individually installed performance components with 16 exact clicks. This allows you to directly influence changed wheel loads, for example to influence bodywork movements. Separate from the rebound adjustment, the KW V3 Clubsport allows you to adjust the compression damping to your requirements, such as the sports tyres used, with twelve precise clicks in the low-speed range.These setting options allow you to consider individual setups to suit the vehicle weight, sports tyre characteristics, track characteristics and operating conditions. - Freely adjustable damping technology in rebound and compression damping- Stainless steel technology "inox-line"- Stepless lowering- Tested adjustment range- high-quality components for a long service life- Adjustable rebound damping with 16 exact clicks- Adjustable compression damping with 12 exact clicks- unique, independently acting damping force adjustment- optionally available with aluminium Unibal support bearing. Setup: Application range and damper tuningThe KW V3 Clubsport coilover suspensions impress with their vehicle-specific setup for trackday events on the Nürburgring Nordschleife as well as the possibility of quickly tuning these suspensions on other racetracks and on individual performance sports cars. Please note the conditions and instructions for this product:- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + dampers)- Vehicles with electronic damper control must be decommissioned. Vehicle-specific KW decommissioning kits can be found in the accessories table.- The dampers have easy-to-operate adjustment wheels. Due to the design, the rebound stage can only be adjusted if the piston rod is accessible.- Clubsport suspension with support bearing: only available with VA support bearing Technical information:Lowering VA/HA (mm): 30-50/25-55Version: V3 ClubsportHardness adjustment: Rebound and compression dampingMaterial: Stainless steelAdjustment VA/HA: thread/threadApproval: Parts certificate (§19.3) Compatible vehicles:Manufacturer Model Version Body Fuel Performance Displacement Cylinder DriveFORD FOCUS III (DYB_) 07/2010- 2.3 RS AWD Hatchback Petrol 257 KW 2261 ccm 4 All-wheel drive

KW V3 Clubsport coilover suspension incl. support bearing With an uncompromising technology transfer from racing to the road, the KW Clubsport coilovers convince.The KW Clubsport coilovers convince with their uncompromising combination of high-end racing technology with maintenance-free KW original equipment components and expertises.This gives you the ideal accessories to realise the full potential of your sports car at trackdays, sports driver training courses, tourist drives on Grand Prix circuits and on the Nürburgring Nordschleife. Developed for the toughest racetrack in the world: the Nürburgring NordschleifeEven in their basic set-up, KW Clubsport coilovers are tuned to the different track surfaces, steep bends, jumps and chicanes of the 20.8 kilometre long Nürburgring Nordschleife. After all, as one of the most successful suspension manufacturers and suppliers in motorsport, we are at home on the Nordschleife.In the VLN Endurance Championship alone, we equip over 70 racing teams and, as a suspension manufacturer, have supported six overall victories at the ADAC Zurich 24h Race Nürburgring in ten years. The winner of the ADAC GT Masters 2011 also relies on our racing expertise, from which the KW Clubsport coilovers benefit.The basic setup of the KW V3 Clubsport and KW V4 Clubsport with separate expansion tank, which is perfectly adapted to the Nordschleife, allows you to adjust your sports car even more individually to the desired sports tyre setup thanks to the numerous adjustment options.In addition to optionally available adjustable support bearings, you can adjust the damping forces of the KW Clubsport coilovers independently in the rebound and compression stages with the integrated KW V3 Clubsport coilover suspension technology like in racingWith the adjustment wheels for the rebound adjustment, you can fine-tune the recommended basic setup for your sports car and your individually installed performance components with 16 exact clicks. This allows you to directly influence changed wheel loads, for example to influence bodywork movements. Separate from the rebound adjustment, the KW V3 Clubsport allows you to adjust the compression damping with twelve exact clicks in the low-speed range to your requirements, such as the sports tyres used.These setting options allow you to consider individual setups to suit the vehicle weight, sports tyre characteristics, track characteristics and operating conditions. - Freely adjustable damping technology in rebound and compression damping- Stainless steel technology "inox-line"- Stepless lowering- Tested adjustment range- high-quality components for a long service life- Adjustable rebound damping with 16 exact clicks- Adjustable compression damping with 12 exact clicks- Unique, independently acting damping force adjustment- optionally available with aluminium Unibal support bearing. Setup: Application range and damper tuningThe KW V3 Clubsport coilover suspensions impress with their vehicle-specific setup for trackday events on the Nürburgring Nordschleife, as well as the possibility of quickly tuning these suspensions for other racetracks and individual performance sports cars. Please note the conditions and instructions for this product: - VA + HA height adjustable (VA coilover struts, HA springs with height adjustment + damper) - Clubsport suspension with support bearing: only available with VA support bearing Technical information: Lowering VA/HA (mm): 25-50/20-45 Version: V3 Clubsport Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive FORD FOCUS II (DA_) 07/2004-09/2013 2.5 RS Hatchback Petrol 224 KW 2521 ccm 5 Front-wheel drive FORD FOCUS II (DA_) 07/2004-09/2013 2.5 RS 500 Hatchback Petrol 257 KW 2521 ccm 5 Front-wheel drive

KW V3 Clubsport coilover suspension incl. support bearing With an uncompromising technology transfer from racing to the road, the KW Clubsport coilovers convince.The KW Clubsport coilovers convince with their uncompromising combination of high-end racing technology with maintenance-free KW original equipment components and expertises.This gives you the ideal accessories to realise the full potential of your sports car at trackdays, sports driver training courses, tourist drives on Grand Prix circuits and on the Nürburgring Nordschleife. Developed for the toughest racetrack in the world: the Nürburgring NordschleifeEven in their basic set-up, KW Clubsport coilovers are tuned to the different track surfaces, steep bends, jumps and chicanes of the 20.8 kilometre long Nürburgring Nordschleife. After all, as one of the most successful suspension manufacturers and suppliers in motorsport, we are at home on the Nordschleife.In the VLN Endurance Championship alone, we equip over 70 racing teams and, as a suspension manufacturer, have supported six overall victories at the ADAC Zurich 24h Race Nürburgring in ten years. The winner of the ADAC GT Masters 2011 also relies on our racing expertise, from which the KW Clubsport coilovers benefit.The basic setup of the KW V3 Clubsport and KW V4 Clubsport with separate expansion tank, which is perfectly adapted to the Nordschleife, allows you to adjust your sports car even more individually to the desired sports tyre setup thanks to the numerous adjustment options.In addition to optionally available adjustable support bearings, you can adjust the damping forces of the KW Clubsport coilovers independently in the rebound and compression stages with the integrated KW V3 Clubsport coilover suspension technology like in racingWith the adjustment wheels for the rebound adjustment, you can fine-tune the recommended basic setup for your sports car and your individually installed performance components with 16 exact clicks. This allows you to directly influence changed wheel loads, for example to influence bodywork movements. Separate from the rebound adjustment, the KW V3 Clubsport allows you to adjust the compression damping with twelve exact clicks in the low-speed range to your requirements, such as the sports tyres used.These setting options allow you to consider individual setups to suit the vehicle weight, sports tyre characteristics, track characteristics and operating conditions. - Freely adjustable damping technology in rebound and compression damping- Stainless steel technology "inox-line"- Stepless lowering- Tested adjustment range- high-quality components for a long service life- Adjustable rebound damping with 16 exact clicks- Adjustable compression damping with 12 exact clicks- Unique, independently acting damping force adjustment- optionally available with aluminium Unibal support bearing. Setup: Application range and damper tuningThe KW V3 Clubsport coilover suspensions impress with their vehicle-specific setup for trackday events on the Nürburgring Nordschleife, as well as the possibility of quickly tuning these suspensions for other racetracks and individual performance sports cars. Please note the conditions and instructions for this product: - VA + HA height adjustable (VA coilover struts, HA springs with height adjustment + damper) - Clubsport suspension with support bearing: only available with VA support bearing Technical information: Lowering VA/HA (mm): 30-55/35-60 Version: V3 Clubsport Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive FORD FOCUS II (DA_) 07/2004-09/2013 2.5 ST Hatchback Petrol 166 KW 2522 ccm 5 Front-wheel drive

KW V3 coilover suspension Unlimited individuality for performance & comfort. Separate damper force adjustment for rebound and compression damping.As with every KW coilover suspension, our suspension engineers also develop a sporty and harmonious basic set-up for the vehicle-specific applications of the KW V3. In addition to tests on our KW 7-post driving dynamics test bench, we also carry out extensive test drives on country roads, the motorway and even on the Nürburgring Nordschleife, kilometre by kilometre, to guarantee you the perfect suspension set-up. For years, the KW V3, one of the world's top aftermarket products, has been the reference for coilover suspensions. With its damper characteristics, high-quality workmanship and excellent durability, it has impressed discerning sports car drivers, tuners, large and small series manufacturers such as Alpina, MTM, Manthey, Oettinger and many other well-known companies in the international automotive industry. Cutting-edge technology from motorsportYou get much more than a sporty lowering and excellent handling on all roads with the KW V3. It is based on our many years of experience as a suspension manufacturer and supplier in international motorsport, such as in the ADAC GT Masters touring car series, FIA GT1, FIA GT3, International GT Open, WTC, VLN and also in the legendary ADAC Zurich 24h Race Nürburgring.Similar to our racing coilovers from the KW Competition programme, the rebound and compression damping of the KW V3 can be adjusted independently of each other. This individual tuning option is appreciated by tuners, sports car manufacturers, tuners and demanding drivers worldwide. The perfect suspension setup for significantly more driving dynamicsIf you have already carried out initial performance modifications to your sporty road vehicle, it is easy to incorporate these into the damper set-up in a targeted manner with the KW V3. The patented KW valve technology for the separate adjustment of the rebound and compression damping allows you to customise the vehicle-specific basic set-up from KW. For example, the KW bottom valve, which can be adjusted in twelve clicks in the low-speed range of the compression stage, gives you the freedom to even take the tyre characteristics of your high and ultra-high performance road tyres into account in the suspension set-up.Thanks to the patented compression adjustment at the lower piston end of the stainless steel housing, you don't even need any tools. The adjustable compression adjustment with its twelve precise clicks allows you to influence body roll and body roll movements by hand without having to change the rebound damping to match the spring rate.With the individually adjustable rebound damping of the KW V3, you can directly influence the handling and comfort through the exact click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery.By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car tracks more accurately and you have even more stability at higher cornering speeds. If, for example, you change from the approved wheel/tyre combinations of your car manufacturer to larger rims, you can use the KW V3 to perfectly match the handling of your car and your new alloy wheels. High-quality, customised and durableThe KW V3 is subjected to extensive quality tests during production and every single damper is checked. This is the only way we can fulfil our claim to provide a warranty of up to five years when a KW coilover suspension V3 is installed by a KW specialist dealer. Due to the filigree workmanship and the use of high-quality components, the KW coilover struts made of stainless steel, for example, are 100 per cent rust-free and have an unlimited service life.This means that the functionality of the stepless lowering system via the dirt-resistant KW trapezoidal thread and the KW polyamide threaded ring is not impaired even after many years. Thanks to the individual lowering with its stepless adjustment range, you can also emphasise the sportiness of your vehicle visually. A feature that is very popular in the performance-orientated tuning scene. - Freely adjustable damping technology in rebound and compression damping- inox-line stainless steel technology- Individual, stepless lowering- Tested adjustment range- high-quality components for a long service life- adjustable rebound damping with 16 exact clicks- 12-way adjustable compression damping with click adjustment- Unique, independently acting damping force adjustment Setup: The individually adjustable rebound & compression damping of the KW V3The KW V3 is the ideal accessory for performance-orientated drivers and tuning enthusiasts who demand a high level of sportiness from their vehicles. The dampers, which are separately adjustable in rebound and compression, allow extensive damper tuning with their sophisticated click adjustment. This makes it easy to directly influence the turn-in behaviour, directional stability, tyre grip and handling characteristics for safe controllability at the limit. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + dampers) - Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible. Technical information: Lowering VA/HA (mm): 5-30/10-35 Design: V3 Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive FORD FIESTA VI (JA8_, CB1, CCN) 06/2008- 1.6 ST Hatchback Petrol 134 KW 1596 ccm 4 Front-wheel drive FORD FIESTA VI (JA8_, CB1, CCN) 06/2008- 1.6 ST200 Hatchback Petrol 147 KW 1596 ccm 4 Front-wheel drive

KW V3 coilover suspension Unlimited individuality for performance & comfort. Separate damper force adjustment for rebound and compression damping.As with every KW coilover suspension, our suspension engineers also develop a sporty and harmonious basic set-up for the vehicle-specific applications of the KW V3. In addition to tests on our KW 7-post driving dynamics test bench, we also carry out extensive test drives on country roads, the motorway and even on the Nürburgring Nordschleife, kilometre by kilometre, to guarantee you the perfect suspension set-up. For years, the KW V3, one of the world's top aftermarket products, has been the reference for coilover suspensions. With its damper characteristics, high-quality workmanship and excellent durability, it has impressed discerning sports car drivers, tuners, large and small series manufacturers such as Alpina, MTM, Manthey, Oettinger and many other well-known companies in the international automotive industry. Cutting-edge technology from motorsportYou get much more than a sporty lowering and excellent handling on all roads with the KW V3. It is based on our many years of experience as a suspension manufacturer and supplier in international motorsport, such as in the ADAC GT Masters touring car series, FIA GT1, FIA GT3, International GT Open, WTC, VLN and also in the legendary ADAC Zurich 24h Race Nürburgring.Similar to our racing coilovers from the KW Competition programme, the rebound and compression damping of the KW V3 can be adjusted independently of each other. This individual tuning option is appreciated by tuners, sports car manufacturers, tuners and demanding drivers worldwide. The perfect suspension setup for significantly more driving dynamicsIf you have already carried out initial performance modifications to your sporty road vehicle, it is easy to incorporate these into the damper set-up in a targeted manner with the KW V3. The patented KW valve technology for the separate adjustment of the rebound and compression damping allows you to customise the vehicle-specific basic set-up from KW. For example, the KW bottom valve, which can be adjusted in twelve clicks in the low-speed range of the compression stage, gives you the freedom to even take the tyre characteristics of your high and ultra-high performance road tyres into account in the suspension set-up.Thanks to the patented compression adjustment at the lower piston end of the stainless steel housing, you don't even need any tools. The adjustable compression adjustment with its twelve precise clicks allows you to influence body roll and body roll movements by hand without having to change the rebound damping to match the spring rate.With the individually adjustable rebound damping of the KW V3, you can directly influence the handling and comfort through the exact click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery.By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car tracks more accurately and you have even more stability at higher cornering speeds. If, for example, you change from the approved wheel/tyre combinations of your car manufacturer to larger rims, you can use the KW V3 to perfectly match the handling of your car and your new alloy wheels. High-quality, customised and durableThe KW V3 is subjected to extensive quality tests during production and every single damper is checked. This is the only way we can fulfil our claim to provide a warranty of up to five years when a KW coilover suspension V3 is installed by a KW specialist dealer. Due to the filigree workmanship and the use of high-quality components, the KW coilover struts made of stainless steel, for example, are 100 per cent rust-free and have an unlimited service life.This means that the functionality of the stepless lowering system via the dirt-resistant KW trapezoidal thread and the KW polyamide threaded ring is not impaired even after many years. Thanks to the individual lowering with its stepless adjustment range, you can also emphasise the sportiness of your vehicle visually. A feature that is very popular in the performance-orientated tuning scene. - Freely adjustable damping technology in rebound and compression damping- inox-line stainless steel technology- Individual, stepless lowering- Tested adjustment range- high-quality components for a long service life- adjustable rebound damping with 16 exact clicks- 12-way adjustable compression damping with click adjustment- Unique, independently acting damping force adjustment Setup: The individually adjustable rebound & compression damping of the KW V3The KW V3 is the ideal accessory for performance-orientated drivers and tuning enthusiasts who demand a high level of sportiness from their vehicles. The dampers, which are separately adjustable in rebound and compression, allow extensive damper tuning with their sophisticated click adjustment. This makes it easy to directly influence the turn-in behaviour, directional stability, tyre grip and handling characteristics for safe controllability at the limit. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + dampers) - Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible. Technical information: Lowering VA/HA (mm): 15-40/25-50 Design: V3 Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive FORD FIESTA VII (JHH) 05/2017- 1.5 ST EcoBoost Hatchback Petrol 147 KW 1496 ccm 3 Front-wheel drive

KW V3 coilover suspension Unlimited individuality for performance & comfort. Separate damper force adjustment for rebound and compression damping.As with every KW coilover suspension, our suspension engineers also develop a sporty and harmonious basic set-up for the vehicle-specific applications of the KW V3. In addition to tests on our KW 7-post driving dynamics test bench, we also carry out extensive test drives on country roads, the motorway and even on the Nürburgring Nordschleife, kilometre by kilometre, to guarantee you the perfect suspension set-up. For years, the KW V3, one of the world's top aftermarket products, has been the reference for coilover suspensions. With its damper characteristics, high-quality workmanship and excellent durability, it has impressed discerning sports car drivers, tuners, large and small series manufacturers such as Alpina, MTM, Manthey, Oettinger and many other well-known companies in the international automotive industry. Cutting-edge technology from motorsportYou get much more than a sporty lowering and excellent handling on all roads with the KW V3. It is based on our many years of experience as a suspension manufacturer and supplier in international motorsport, such as in the ADAC GT Masters touring car series, FIA GT1, FIA GT3, International GT Open, WTC, VLN and also in the legendary ADAC Zurich 24h Race Nürburgring.Similar to our racing coilovers from the KW Competition programme, the rebound and compression damping of the KW V3 can be adjusted independently of each other. This individual tuning option is appreciated by tuners, sports car manufacturers, tuners and demanding drivers worldwide. The perfect suspension setup for significantly more driving dynamicsIf you have already carried out initial performance modifications to your sporty road vehicle, it is easy to incorporate these into the damper set-up in a targeted manner with the KW V3. The patented KW valve technology for the separate adjustment of the rebound and compression damping allows you to customise the vehicle-specific basic set-up from KW. For example, the KW bottom valve, which can be adjusted in twelve clicks in the low-speed range of the compression stage, gives you the freedom to even take the tyre characteristics of your high and ultra-high performance road tyres into account in the suspension set-up.Thanks to the patented compression adjustment at the lower piston end of the stainless steel housing, you don't even need any tools. The adjustable compression adjustment with its twelve precise clicks allows you to influence body roll and body roll movements by hand without having to change the rebound damping to match the spring rate.With the individually adjustable rebound damping of the KW V3, you can directly influence the handling and comfort through the exact click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery.By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car tracks more accurately and you have even more stability at higher cornering speeds. If, for example, you change from the approved wheel/tyre combinations of your car manufacturer to larger rims, you can use the KW V3 to perfectly match the handling of your car and your new alloy wheels. High-quality, customised and durableThe KW V3 is subjected to extensive quality tests during production and every single damper is checked. This is the only way we can fulfil our claim to provide a warranty of up to five years when a KW coilover suspension V3 is installed by a KW specialist dealer. Due to the filigree workmanship and the use of high-quality components, the KW coilover struts made of stainless steel, for example, are 100 per cent rust-free and have an unlimited service life.This means that the functionality of the stepless lowering system via the dirt-resistant KW trapezoidal thread and the KW polyamide threaded ring is not impaired even after many years. Thanks to the individual lowering with its stepless adjustment range, you can also emphasise the sportiness of your vehicle visually. A feature that is very popular in the performance-orientated tuning scene. - Freely adjustable damping technology in rebound and compression damping- inox-line stainless steel technology- Individual, stepless lowering- Tested adjustment range- high-quality components for a long service life- adjustable rebound damping with 16 exact clicks- 12-way adjustable compression damping with click adjustment- Unique, independently acting damping force adjustment Setup: The individually adjustable rebound & compression damping of the KW V3The KW V3 is the ideal accessory for performance-orientated drivers and tuning enthusiasts who demand a high level of sportiness from their vehicles. The dampers, which are separately adjustable in rebound and compression, allow extensive damper tuning with their sophisticated click adjustment. This makes it easy to directly influence the turn-in behaviour, directional stability, tyre grip and handling characteristics for safe controllability at the limit. Please note the conditions and instructions for this product: - VA + HA height adjustable (VA coilover struts, HA springs with height adjustment + damper) Technical info: Lowering VA/HA (mm): 10-40/10-40 Version: V3 Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive FORD FOCUS I (DA1, DAW, DB1, DBW, DBY) 09/1998-11/2009 RS Hatchback Petrol 158 KW 1988 ccm 4 Front-wheel drive

KW V3 coilover suspension Unlimited individuality for performance & comfort. Separate damper force adjustment for rebound and compression damping.As with every KW coilover suspension, our suspension engineers also develop a sporty and harmonious basic set-up for the vehicle-specific applications of the KW V3. In addition to tests on our KW 7-post driving dynamics test bench, we also carry out extensive test drives on country roads, the motorway and even on the Nürburgring Nordschleife, kilometre by kilometre, to guarantee you the perfect suspension set-up. For years, the KW V3, one of the world's top aftermarket products, has been the reference for coilover suspensions. With its damper characteristics, high-quality workmanship and excellent durability, it has impressed discerning sports car drivers, tuners, large and small series manufacturers such as Alpina, MTM, Manthey, Oettinger and many other well-known companies in the international automotive industry. Cutting-edge technology from motorsportYou get much more than a sporty lowering and excellent handling on all roads with the KW V3. It is based on our many years of experience as a suspension manufacturer and supplier in international motorsport, such as in the ADAC GT Masters touring car series, FIA GT1, FIA GT3, International GT Open, WTC, VLN and also in the legendary ADAC Zurich 24h Race Nürburgring.Similar to our racing coilovers from the KW Competition programme, the rebound and compression damping of the KW V3 can be adjusted independently of each other. This individual tuning option is appreciated by tuners, sports car manufacturers, tuners and demanding drivers worldwide. The perfect suspension setup for significantly more driving dynamicsIf you have already carried out initial performance modifications to your sporty road vehicle, it is easy to incorporate these into the damper set-up in a targeted manner with the KW V3. The patented KW valve technology for the separate adjustment of the rebound and compression damping allows you to customise the vehicle-specific basic set-up from KW. For example, the KW bottom valve, which can be adjusted in twelve clicks in the low-speed range of the compression stage, gives you the freedom to even take the tyre characteristics of your high and ultra-high performance road tyres into account in the suspension set-up.Thanks to the patented compression adjustment at the lower piston end of the stainless steel housing, you don't even need any tools. The adjustable compression adjustment with its twelve precise clicks allows you to influence body roll and body roll movements by hand without having to change the rebound damping to match the spring rate.With the individually adjustable rebound damping of the KW V3, you can directly influence the handling and comfort through the exact click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery.By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car tracks more accurately and you have even more stability at higher cornering speeds. If, for example, you change from the approved wheel/tyre combinations of your car manufacturer to larger rims, you can use the KW V3 to perfectly match the handling of your car and your new alloy wheels. High-quality, customised and durableThe KW V3 is subjected to extensive quality tests during production and every single damper is checked. This is the only way we can fulfil our claim to provide a warranty of up to five years when a KW coilover suspension V3 is installed by a KW specialist dealer. Due to the filigree workmanship and the use of high-quality components, the KW coilover struts made of stainless steel, for example, are 100 per cent rust-free and have an unlimited service life.This means that the functionality of the stepless lowering system via the dirt-resistant KW trapezoidal thread and the KW polyamide threaded ring is not impaired even after many years. Thanks to the individual lowering with its stepless adjustment range, you can also emphasise the sportiness of your vehicle visually. A feature that is very popular in the performance-orientated tuning scene. - Freely adjustable damping technology in rebound and compression damping- inox-line stainless steel technology- Individual, stepless lowering- Tested adjustment range- high-quality components for a long service life- adjustable rebound damping with 16 exact clicks- 12-way adjustable compression damping with click adjustment- Unique, independently acting damping force adjustment Setup: The individually adjustable rebound & compression damping of the KW V3The KW V3 is the ideal accessory for performance-orientated drivers and tuning enthusiasts who demand a high level of sportiness from their vehicles. The dampers, which are separately adjustable in rebound and compression, allow extensive damper tuning with their sophisticated click adjustment. This makes it easy to directly influence the turn-in behaviour, directional stability, tyre grip and handling characteristics for safe controllability at the limit. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) Technical info: Lowering VA/HA (mm): 25-50/20-45 Version: V3 Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive FORD FOCUS II (DA_) 07/2004-09/2013 2.5 RS Hatchback Petrol 224 KW 2521 ccm 5 Front-wheel drive FORD FOCUS II (DA_) 07/2004-09/2013 2.5 RS 500 Hatchback Petrol 257 KW 2521 ccm 5 Front-wheel drive

KW V3 coilover suspension Unlimited individuality for performance & comfort. Separate damper force adjustment for rebound and compression damping.As with every KW coilover suspension, our suspension engineers also develop a sporty and harmonious basic set-up for the vehicle-specific applications of the KW V3. In addition to tests on our KW 7-post driving dynamics test bench, we also carry out extensive test drives on country roads, the motorway and even on the Nürburgring Nordschleife, kilometre by kilometre, to guarantee you the perfect suspension set-up. For years, the KW V3, one of the world's top aftermarket products, has been the reference for coilover suspensions. With its damper characteristics, high-quality workmanship and excellent durability, it has impressed discerning sports car drivers, tuners, large and small series manufacturers such as Alpina, MTM, Manthey, Oettinger and many other well-known companies in the international automotive industry. Cutting-edge technology from motorsportYou get much more than a sporty lowering and excellent handling on all roads with the KW V3. It is based on our many years of experience as a suspension manufacturer and supplier in international motorsport, such as in the ADAC GT Masters touring car series, FIA GT1, FIA GT3, International GT Open, WTC, VLN and also in the legendary ADAC Zurich 24h Race Nürburgring.Similar to our racing coilovers from the KW Competition programme, the rebound and compression damping of the KW V3 can be adjusted independently of each other. This individual tuning option is appreciated by tuners, sports car manufacturers, tuners and demanding drivers worldwide. The perfect suspension setup for significantly more driving dynamicsIf you have already carried out initial performance modifications to your sporty road vehicle, it is easy to incorporate these into the damper set-up in a targeted manner with the KW V3. The patented KW valve technology for the separate adjustment of the rebound and compression damping allows you to customise the vehicle-specific basic set-up from KW. For example, the KW bottom valve, which can be adjusted in twelve clicks in the low-speed range of the compression stage, gives you the freedom to even take the tyre characteristics of your high and ultra-high performance road tyres into account in the suspension set-up.Thanks to the patented compression adjustment at the lower piston end of the stainless steel housing, you don't even need any tools. The adjustable compression adjustment with its twelve precise clicks allows you to influence body roll and body roll movements by hand without having to change the rebound damping to match the spring rate.With the individually adjustable rebound damping of the KW V3, you can directly influence the handling and comfort through the exact click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery.By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car tracks more accurately and you have even more stability at higher cornering speeds. If, for example, you change from the approved wheel/tyre combinations of your car manufacturer to larger rims, you can use the KW V3 to perfectly match the handling of your car and your new alloy wheels. High-quality, customised and durableThe KW V3 is subjected to extensive quality tests during production and every single damper is checked. This is the only way we can fulfil our claim to provide a warranty of up to five years when a KW coilover suspension V3 is installed by a KW specialist dealer. Due to the filigree workmanship and the use of high-quality components, the KW coilover struts made of stainless steel, for example, are 100 per cent rust-free and have an unlimited service life.This means that the functionality of the stepless lowering system via the dirt-resistant KW trapezoidal thread and the KW polyamide threaded ring is not impaired even after many years. Thanks to the individual lowering with its stepless adjustment range, you can also emphasise the sportiness of your vehicle visually. A feature that is very popular in the performance-orientated tuning scene. - Freely adjustable damping technology in rebound and compression damping- inox-line stainless steel technology- Individual, stepless lowering- Tested adjustment range- high-quality components for a long service life- adjustable rebound damping with 16 exact clicks- 12-way adjustable compression damping with click adjustment- Unique, independently acting damping force adjustment Setup: The individually adjustable rebound & compression damping of the KW V3The KW V3 is the ideal accessory for performance-orientated drivers and tuning enthusiasts who demand a high level of sportiness from their vehicles. The dampers, which are separately adjustable in rebound and compression, allow extensive damper tuning with their sophisticated click adjustment. This makes it easy to directly influence the turn-in behaviour, directional stability, tyre grip and handling characteristics for safe controllability at the limit. Please note the conditions and instructions for this product: - VA + HA height adjustable (VA coilover struts, HA springs with height adjustment + damper) - When used with standard wheel/tyre combinations, additional standard wheel spacers from the accessories may be required Technical information: Lowering VA/HA (mm): 10-40/15-45 Design: V3 Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive FORD FOCUS II (DA_) 07/2004-09/2013 2.5 ST Hatchback Petrol 166 KW 2522 ccm 5 Front-wheel drive

KW V3 coilover suspension Unlimited individuality for performance & comfort. Separate damper force adjustment for rebound and compression damping. As with every KW coilover suspension, our suspension engineers also develop a sporty and harmonious basic set-up for the vehicle-specific applications of the KW V3. In addition to tests on our KW 7-post driving dynamics test bench, we also carry out extensive test drives on country roads, the motorway and even on the Nürburgring Nordschleife, kilometre by kilometre, to guarantee you the perfect suspension set-up. For years, the KW V3, one of the world's top aftermarket products, has been the reference for coilover suspensions. With its damper characteristics, high-quality workmanship and excellent durability, it has impressed discerning sports car drivers, tuners, large and small series manufacturers such as Alpina, MTM, Manthey, Oettinger and many other well-known companies in the international automotive industry. Cutting-edge technology from motorsport You get much more than a sporty lowering and excellent handling on all roads with the KW V3. It is based on our many years of experience as a suspension manufacturer and supplier in international motorsport, such as in the ADAC GT Masters touring car series, FIA GT1, FIA GT3, International GT Open, WTC, VLN and also in the legendary ADAC Zurich 24h Race Nürburgring. Similar to our racing coilovers from the KW Competition programme, the rebound and compression damping of the KW V3 can be adjusted independently of each other. This individual tuning option is appreciated by tuners, sports car manufacturers, tuners and demanding drivers worldwide. The perfect suspension setup for significantly more driving dynamics If you have already carried out initial performance modifications to your sporty road vehicle, it is easy to incorporate these into the damper set-up in a targeted manner with the KW V3. The patented KW valve technology for the separate adjustment of the rebound and compression damping allows you to customise the vehicle-specific basic set-up from KW. For example, the KW bottom valve, which can be adjusted in twelve clicks in the low-speed range of the compression stage, gives you the freedom to even take the tyre characteristics of your high and ultra-high performance road tyres into account in the suspension set-up. Thanks to the patented compression adjustment at the lower piston end of the stainless steel housing, you don't even need any tools. The adjustable compression adjustment with its twelve precise clicks allows you to influence body roll and body roll movements by hand without having to change the rebound damping to match the spring rate. With the individually adjustable rebound damping of the KW V3, you can directly influence the handling and comfort through the exact click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery. By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car tracks more accurately and you have even more stability at higher cornering speeds. If, for example, you change from the approved wheel/tyre combinations of your car manufacturer to larger rims, you can use the KW V3 to perfectly match the handling of your car and your new alloy wheels. High-quality, customised and durable The KW V3 is subjected to extensive quality tests during production and every single damper is checked. This is the only way we can fulfil our claim to provide a warranty of up to five years when a KW coilover suspension V3 is installed by a KW specialist dealer. Due to the filigree workmanship and the use of high-quality components, the KW coilover struts made of stainless steel, for example, are 100 per cent rust-free and have an unlimited service life. This means that the functionality of the stepless lowering system via the dirt-resistant KW trapezoidal thread and the KW polyamide threaded ring is not impaired even after many years. Thanks to the individual lowering with its stepless adjustment range, you can also emphasise the sportiness of your vehicle visually. A feature that is very popular in the performance-orientated tuning scene. - Freely adjustable damping technology in rebound and compression damping - inox-line stainless steel technology - Individual, stepless lowering - Tested adjustment range - high-quality components for a long service life - adjustable rebound damping with 16 exact clicks - 12-way adjustable compression damping with click adjustment - Unique, independently acting damping force adjustment Setup: The individually adjustable rebound & compression damping of the KW V3 The KW V3 is the ideal accessory for performance-orientated drivers and tuning enthusiasts who demand a high level of sportiness from their vehicles. The dampers, which are separately adjustable in rebound and compression, allow extensive damper tuning with their sophisticated click adjustment. This makes it easy to directly influence the turn-in behaviour, directional stability, tyre grip and handling characteristics for safe controllability at the limit. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + dampers) - Dampers have easy-to-operate adjustment wheels. Due to the design, the rebound stage can only be adjusted if the piston rod is accessible. Technical information: Lowering VA/HA (mm): 25-40/20-35 Version: V3 Force adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive FORD FOCUS III (DYB_) 07/2010- 2.0 ST Hatchback Petrol 184 KW 1999 ccm 4 Front-wheel drive FORD FOCUS III (DYB_) 07/2010- 2.0 ST Hatchback Petrol 188 KW 1999 ccm 4 Front-wheel drive FORD FOCUS III (DYB_) 07/2010- 2.0 TDCi ST Hatchback Diesel 136 KW 1997 ccm 4 front-wheel drive

KW V3 coilover suspension Unlimited individuality for performance & comfort. Separate damper force adjustment for rebound and compression damping.As with every KW coilover suspension, our suspension engineers also develop a sporty and harmonious basic set-up for the vehicle-specific applications of the KW V3. In addition to tests on our KW 7-post driving dynamics test bench, we also carry out extensive test drives on country roads, the motorway and even on the Nürburgring Nordschleife, kilometre by kilometre, to guarantee you the perfect suspension set-up. For years, the KW V3, one of the world's top aftermarket products, has been the reference for coilover suspensions. With its damper characteristics, high-quality workmanship and excellent durability, it has impressed discerning sports car drivers, tuners, large and small series manufacturers such as Alpina, MTM, Manthey, Oettinger and many other well-known companies in the international automotive industry. Cutting-edge technology from motorsportYou get much more than a sporty lowering and excellent handling on all roads with the KW V3. It is based on our many years of experience as a suspension manufacturer and supplier in international motorsport, such as in the ADAC GT Masters touring car series, FIA GT1, FIA GT3, International GT Open, WTC, VLN and also in the legendary ADAC Zurich 24h Race Nürburgring.Similar to our racing coilovers from the KW Competition programme, the rebound and compression damping of the KW V3 can be adjusted independently of each other. This individual tuning option is appreciated by tuners, sports car manufacturers, tuners and demanding drivers worldwide. The perfect suspension setup for significantly more driving dynamicsIf you have already carried out initial performance modifications to your sporty road vehicle, it is easy to incorporate these into the damper set-up in a targeted manner with the KW V3. The patented KW valve technology for the separate adjustment of the rebound and compression damping allows you to customise the vehicle-specific basic set-up from KW. For example, the KW bottom valve, which can be adjusted in twelve clicks in the low-speed range of the compression stage, gives you the freedom to even take the tyre characteristics of your high and ultra-high performance road tyres into account in the suspension set-up.Thanks to the patented compression adjustment at the lower piston end of the stainless steel housing, you don't even need any tools. The adjustable compression adjustment with its twelve precise clicks allows you to influence body roll and body roll movements by hand without having to change the rebound damping to match the spring rate.With the individually adjustable rebound damping of the KW V3, you can directly influence the handling and comfort through the exact click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery.By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car tracks more accurately and you have even more stability at higher cornering speeds. If, for example, you change from the approved wheel/tyre combinations of your car manufacturer to larger rims, you can use the KW V3 to perfectly match the handling of your car and your new alloy wheels. High-quality, customised and durableThe KW V3 is subjected to extensive quality tests during production and every single damper is checked. This is the only way we can fulfil our claim to provide a warranty of up to five years when a KW coilover suspension V3 is installed by a KW specialist dealer. Due to the filigree workmanship and the use of high-quality components, the KW coilover struts made of stainless steel, for example, are 100 per cent rust-free and have an unlimited service life.This means that the functionality of the stepless lowering system via the dirt-resistant KW trapezoidal thread and the KW polyamide threaded ring is not impaired even after many years. Thanks to the individual lowering with its stepless adjustment range, you can also emphasise the sportiness of your vehicle visually. A feature that is very popular in the performance-orientated tuning scene. - Freely adjustable damping technology in rebound and compression damping- inox-line stainless steel technology- Individual, stepless lowering- Tested adjustment range- high-quality components for a long service life- adjustable rebound damping with 16 exact clicks- 12-way adjustable compression damping with click adjustment- Unique, independently acting damping force adjustment Setup: The individually adjustable rebound & compression damping of the KW V3The KW V3 is the ideal accessory for performance-orientated drivers and tuning enthusiasts who demand a high level of sportiness from their vehicles. The dampers, which are separately adjustable in rebound and compression, allow extensive damper tuning with their sophisticated click adjustment. This makes it easy to directly influence the turn-in behaviour, directional stability, tyre grip and handling characteristics for safe controllability at the limit. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + dampers) - Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible. - Electronic damper control must be deactivated. Electronic kit for decommissioning is included in the scope of delivery. Technical information: Lowering VA/HA (mm): 30-50/25-55 Design: V3 Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive FORD FOCUS III (DYB_) 07/2010- 2.3 RS AWD Hatchback Petrol 257 KW 2261 ccm 4 All-wheel drive

KW V3 coilover suspension Unlimited individuality for performance & comfort. Separate damper force adjustment for rebound and compression damping.As with every KW coilover suspension, our suspension engineers also develop a sporty and harmonious basic set-up for the vehicle-specific applications of the KW V3. In addition to tests on our KW 7-post driving dynamics test bench, we also carry out extensive test drives on country roads, the motorway and even on the Nürburgring Nordschleife, kilometre by kilometre, to guarantee you the perfect suspension set-up. For years, the KW V3, one of the world's top aftermarket products, has been the reference for coilover suspensions. With its damper characteristics, high-quality workmanship and excellent durability, it has impressed discerning sports car drivers, tuners, large and small series manufacturers such as Alpina, MTM, Manthey, Oettinger and many other well-known companies in the international automotive industry. Cutting-edge technology from motorsportYou get much more than a sporty lowering and excellent handling on all roads with the KW V3. It is based on our many years of experience as a suspension manufacturer and supplier in international motorsport, such as in the ADAC GT Masters touring car series, FIA GT1, FIA GT3, International GT Open, WTC, VLN and also in the legendary ADAC Zurich 24h Race Nürburgring.Similar to our racing coilovers from the KW Competition programme, the rebound and compression damping of the KW V3 can be adjusted independently of each other. This individual tuning option is appreciated by tuners, sports car manufacturers, tuners and demanding drivers worldwide. The perfect suspension setup for significantly more driving dynamicsIf you have already carried out initial performance modifications to your sporty road vehicle, it is easy to incorporate these into the damper set-up in a targeted manner with the KW V3. The patented KW valve technology for the separate adjustment of the rebound and compression damping allows you to customise the vehicle-specific basic set-up from KW. For example, the KW bottom valve, which can be adjusted in twelve clicks in the low-speed range of the compression stage, gives you the freedom to even take the tyre characteristics of your high and ultra-high performance road tyres into account in the suspension set-up.Thanks to the patented compression adjustment at the lower piston end of the stainless steel housing, you don't even need any tools. The adjustable compression adjustment with its twelve precise clicks allows you to influence body roll and body roll movements by hand without having to change the rebound damping to match the spring rate.With the individually adjustable rebound damping of the KW V3, you can directly influence the handling and comfort through the exact click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery.By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car tracks more accurately and you have even more stability at higher cornering speeds. If, for example, you change from the approved wheel/tyre combinations of your car manufacturer to larger rims, you can use the KW V3 to perfectly match the handling of your car and your new alloy wheels. High-quality, customised and durableThe KW V3 is subjected to extensive quality tests during production and every single damper is checked. This is the only way we can fulfil our claim to provide a warranty of up to five years when a KW coilover suspension V3 is installed by a KW specialist dealer. Due to the filigree workmanship and the use of high-quality components, the KW coilover struts made of stainless steel, for example, are 100 per cent rust-free and have an unlimited service life.This means that the functionality of the stepless lowering system via the dirt-resistant KW trapezoidal thread and the KW polyamide threaded ring is not impaired even after many years. Thanks to the individual lowering with its stepless adjustment range, you can also emphasise the sportiness of your vehicle visually. A feature that is very popular in the performance-orientated tuning scene. - Freely adjustable damping technology in rebound and compression damping- inox-line stainless steel technology- Individual, stepless lowering- Tested adjustment range- high-quality components for a long service life- adjustable rebound damping with 16 exact clicks- 12-way adjustable compression damping with click adjustment- Unique, independently acting damping force adjustment Setup: The individually adjustable rebound & compression damping of the KW V3The KW V3 is the ideal accessory for performance-orientated drivers and tuning enthusiasts who demand a high level of sportiness from their vehicles. The dampers, which are separately adjustable in rebound and compression, allow extensive damper tuning with their sophisticated click adjustment. This makes it easy to directly influence the turn-in behaviour, directional stability, tyre grip and handling characteristics for safe controllability at the limit. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + dampers) - Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible. Technical information: Lowering VA/HA (mm): 25-40/20-40 Design: V3 Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive FORD FOCUS III Turnier (DYB) 07/2010- 2.0 ST Kombi Petrol 184 KW 1999 ccm 4 Front-wheel drive FORD FOCUS III Turnier (DYB) 07/2010- 2.0 TDCi ST Kombi Diesel 136 KW 1997 ccm 4 Front-wheel drive

KW V3 coilover suspension Unlimited individuality for performance & comfort. Damper force adjustment separately for rebound & compression damping.As with every KW coilover suspension, our suspension engineers also develop a sporty and harmonious basic set-up for the vehicle-specific applications of the KW V3. In addition to tests on our KW 7-post driving dynamics test bench, we also carry out extensive test drives on country roads, the motorway and even on the Nürburgring Nordschleife, kilometre by kilometre, to guarantee you the perfect suspension set-up. For years, the KW V3, one of the world's top aftermarket products, has been the reference for coilover suspensions. With its damper characteristics, high-quality workmanship and excellent durability, it has impressed discerning sports car drivers, tuners, large and small series manufacturers such as Alpina, MTM, Manthey, Oettinger and many other well-known companies in the international automotive industry. Cutting-edge technology from motorsportYou get much more than a sporty lowering and excellent handling on all roads with the KW V3. It is based on our many years of experience as a suspension manufacturer and supplier in international motorsport, such as in the ADAC GT Masters touring car series, FIA GT1, FIA GT3, International GT Open, WTC, VLN and also in the legendary ADAC Zurich 24h Race Nürburgring.Similar to our racing coilovers from the KW Competition programme, the rebound and compression damping of the KW V3 can be adjusted independently of each other. This individual tuning option is appreciated by tuners, sports car manufacturers, tuners and demanding drivers worldwide. The perfect suspension setup for significantly more driving dynamicsIf you have already carried out initial performance modifications to your sporty road vehicle, it is easy to incorporate these into the damper set-up in a targeted manner with the KW V3. The patented KW valve technology for the separate adjustment of the rebound and compression damping allows you to customise the vehicle-specific basic set-up from KW. For example, the KW bottom valve, which can be adjusted in twelve clicks in the low-speed range of the compression damping, gives you the freedom to even take the tyre characteristics of your high and ultra-high performance road tyres into account in the suspension set-up.Thanks to the patented compression adjustment at the lower piston end of the stainless steel housing, you don't even need any tools. The adjustable compression adjustment with its twelve precise clicks allows you to influence body roll and body roll movements by hand without having to change the rebound damping to match the spring rate.With the individually adjustable rebound damping of the KW V3, you can directly influence the handling and comfort through the exact click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery.By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car tracks more accurately and you have even more stability at higher cornering speeds. If, for example, you change from the approved wheel/tyre combinations of your car manufacturer to larger rims, you can use the KW V3 to perfectly match the handling of your car and your new alloy wheels. High-quality, customised and durableThe KW V3 is subjected to extensive quality tests during production and every single damper is checked. This is the only way we can fulfil our claim to provide a warranty of up to five years when a KW coilover suspension V3 is installed by a KW specialist dealer. Due to the filigree workmanship and the use of high-quality components, the KW coilover struts made of stainless steel, for example, are 100 per cent rust-free and have an unlimited service life.This means that the functionality of the stepless lowering system via the dirt-resistant KW trapezoidal thread and the KW polyamide threaded ring is not impaired even after many years. Thanks to the individual lowering with its stepless adjustment range, you can also emphasise the sportiness of your vehicle visually. A feature that is very popular in the performance-orientated tuning scene. - Freely adjustable damping technology in rebound and compression damping- inox-line stainless steel technology- Individual, stepless lowering- Tested adjustment range- high-quality components for a long service life- adjustable rebound damping with 16 exact clicks- 12-way adjustable compression damping with click adjustment- Unique, independently acting damping force adjustment Setup: The individually adjustable rebound & compression damping of the KW V3The KW V3 is the ideal accessory for performance-orientated drivers and tuning enthusiasts who demand a high level of sportiness from their vehicles. The dampers, which are separately adjustable in rebound and compression, allow extensive damper tuning with their sophisticated click adjustment. This makes it easy to directly influence the turn-in behaviour, directional stability, tyre grip and handling characteristics for safe controllability at the limit. Please note the conditions and instructions for this product:- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + dampers)- For vehicles with electronic damper control, this must be deactivated. - Dampers have easy-to-operate adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible. Technical information:Lowering VA/HA (mm): 30-50/30-50Version: V3Hardness adjustment: Rebound and compression dampingMaterial: Stainless steelAdjustment VA/HA: thread/threadRear axle design: Multi-link (independent suspension)Approval: Parts certificate (§19.3) Compatible vehicles:Manufacturer Model Version Body Fuel Performance Displacement Cylinder DriveFORD FOCUS IV (DEH) 01/2018- 2.0 EcoBlue Hatchback Diesel 110 KW 1995 ccm 4 Front-wheel driveFORD FOCUS IV (DEH) 01/2018- 2.0 ST EcoBlue Hatchback Diesel 140 KW 1995 ccm 4 Front-wheel driveFORD FOCUS IV (DEH) 01/2018- 2.3 ST EcoBoost Hatchback Petrol 206 KW 2261 ccm 4 Front-wheel drive

The Wagner Tuning Performance intercooler kit fits the following vehicles:Ford Focus RS Mk2 2009-2010Ford Focus RS500 Mk2 2009-2010 Dive into the future of vehicle performance with our Wagner Tuning Evo 2 Performance Intercooler for the Ford Focus MK2! Ready to unleash the full potential of your Ford Focus MK2? Our Evo 2 Performance Intercooler is the ultimate choice for enthusiasts who want more. With impressive mesh dimensions of 730mm x 300mm x 70mm, equating to a massive 15.3 litres of volume, this cooler not only offers twice the flow area, but also an astonishing 125% increase in charge air volume compared to the original cooler. At the heart of our Evo 2 intercooler is our exclusive high performance mesh. Designed to not only provide superior cooling, but also optimise internal airflow. This mesh, combined with our CAD designed freeform cast aluminium end boxes, ensures maximum airflow and minimises back pressure compared to the stock cooler. Weighing just 10.7 kg, our intercooler is not only powerful but also lightweight. The reduced back pressure enables improved engine performance and efficiency. In addition, it is equipped with an anti-corrosion coating that not only protects against rust, but also has excellent heat conduction properties. Installation is child's play. The kit is completely ready to install and allows easy replacement with the standard intercooler. You can continue to use your original charge air hoses, saving time and effort. Prepare to conquer the roads and push the limits of performance. Order your Evo 2 Performance intercooler for the Ford Focus MK2 now and experience how your Ford Focus becomes a true performance legend. Advantages of the Wagner Tuning intercooler:- Improved cooling performance- 125% increased charge air volume- less back pressure- current-optimised- Plug & Play Scope of delivery:1 intercooler1 carbon fibre air duct1 mounting material1 fitting instructions Attention: Not authorised in the area of the StVZO.

The Wagner Tuning Performance intercooler kit fits the following vehicle:Ford Focus ST MK2 2008-2010 faceliftFord Focus ST MK2 2005-2008 pre-facelift Welcome to the future of performance: The Wagner Tuning Performance high performance intercooler for the Ford Focus MK2. Get ready for a performance revolution in your Ford Focus MK2. Our Performance high performance intercooler sets new standards in cooling and performance. With impressive net dimensions (730mm x 300mm x 70mm = 15.3 liters), this cooler not only offers a generous 100% larger intake area, but also an impressive 125% increase in charge air volume compared to the original intercooler. At the heart of this cooler is our exclusive high performance mesh. It has been developed to ensure optimum airflow and offers outstanding cooling properties. The free-form end boxes, precisely developed in CAD and made of high-quality cast aluminum, ensure the best possible internal airflow. The intercooler offers less back pressure than the standard radiator and has extended connection diameters of 66mm. The kit includes reinforced silicone hoses that are perfectly matched to the new connections. Installation is extremely simple, as our performance intercooler is supplied as a complete kit. Replacement with the standard intercooler is straightforward and requires no complex adjustments. This kit has been tested to up to 6 bar and is absolutely pressure-stable. Our intercooler also has an anti-corrosion coating with outstanding heat conduction properties. This not only guarantees optimum cooling, but also a significant increase in performance for your Ford Focus MK2. Ready to dominate the roads with impressive power? Order now and experience the future of performance technology. Your Ford Focus MK2 will thank you with every acceleration. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 100% larger inflow area- 125% charge air volume- flow-optimized- Lower back pressure- Plug & Play Scope of delivery:1 intercooler2 silicone hoses2 hose clamps1 mounting material1 assembly instruction Attention: Not approved in the area of the StVZO.

The Wagner Tuning Performance intercooler kit is suitable for the following model:Ford Focus ST Mk4 2.3 Ecoboost 206kW/280hp*Additional adaptations for vehicles with Adaptive Cruise Control (ACC). See installation instructions. Experience an impressive increase in performance with our Wagner Tuning Performance intercooler! Our Performance intercooler sets new standards in terms of efficiency and performance. With net dimensions of 720 mm x 201 mm x 130 mm (stepped), it offers a generous external charge air volume of 15.4 liters compared to the conventional 5.5 liters (OEM). Thanks to the newly developed performance high performance mesh (bar and plate), sufficient airflow is maintained for adjacent components such as the water cooler, while the intercooler itself remains light and compact. With a total weight of just 11.9 kg, it is a real lightweight. The cast aluminium end boxes were created using the CAD process and optimized using CFD simulations to ensure optimum internal airflow. An integrated air duct in the end box ensures even filling of the competition high-performance network. The inlets and outlets of the intercooler have been enlarged to Ø 65 mm, which makes it necessary to reinforce the silicone hoses. Overall, our intercooler offers a significantly lower back pressure than the standard intercooler. In addition, all our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This ensures long-lasting and optimum cooling with an impressive increase in performance. Installation is carried out by replacing the OEM charge air cooler and is easy to carry out thanks to our detailed installation instructions. We attach great importance to continuous quality monitoring of all our products in order to guarantee you the highest quality at all times. Take your performance to a new level with our performance intercooler and experience the full potential of your vehicle! Advantages of the Wagner Tuning intercooler:- improved cooling performance, flow-optimized- 32% less back pressure- Inlets and outlets of the intercooler enlarged to Ø 65 mm- 15.5 liters charge air volume (instead of OEM: 5.5 liters)- Plug & Play Scope of delivery:1 intercooler2 silicone hoses4 hose clamps1 mounting material1 assembly instructionAttention: Not approved in the area of the StVZO.

This silicone hose kit has been specially developed for use with our original intercooler and guarantees a perfect fit and optimum performance for the Ford Focus ST Mk2. Increase the performance and reliability of your Ford Focus ST Mk2 with the high-quality silicone hose kit from WAGNER Tuning. Designed for improved cooling performance and optimum power, this kit offers an ideal solution for demanding drivers who value quality and performance. Features:High quality materials: the silicone hoses are made from high quality material that provides excellent heat and pressure resistance to ensure long term durability.Improved performance: Optimized airflow improves engine cooling performance, resulting in increased power and a more responsive ride.Easy installation: The kit comes with all the necessary hose clamps and mounting materials and is simple and straightforward to install. No complicated modifications required.Optimum design: The kit is specially designed to meet the requirements of the Ford Focus ST Mk2 and offers a perfect fit and optimum performance. Note: The item image is for illustrative purposes only. The actual shape of the product may differ slightly. Attention: This hose kit is only compatible with our Performance intercooler. Scope of delivery:2 silicone hoses2 hose clampsFastening material