A powerful brake is one of the most important components in motorsport. With these upgrade kits, the necessary balance of performance, weight and durability has been perfectly combined through the uncompromising selection of materials, so that this product can meet the high demands of extreme automotive applications. To achieve this, MOV'IT has increased the diameter and thickness of the brake discs and used more cross holes. Each pre-cast hole is re-drilled and countersunk to achieve a more favourable flow. The brake disc's optimised DDE ventilation system has an 80% larger surface area compared to other brake discs, resulting in a significant reduction in temperature and wear. Attention: The conversion means that only rims with at least 19 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. Bundle Street 1: - Upgrade kit front axle, 382mm, 2-piece disc, perforated - incl. parts certificate Bundle Street 2 (+ sports / comfort brake pads): - Upgrade kit front axle, 382mm, 2-piece disc, perforated - MOVIT sports or comfort brake pads - incl. parts certificate Street 3 bundle (+ sports / comfort brake pads + steel flex lines): - Upgrade kit front axle, 382mm, 2-piece disc, perforated - MOVIT sports or comfort brake pads - Steel flex lines for front and rear axle - incl. parts certificate Details:MOVIT steel brake discs, 2-piece- Highly efficient DDE cooling system- Maximum fading protection- Double, directional ventilation- Perforated for optimum response behaviour even on wet roads- Special alloy for high thermal conductivityMOVIT sports brake pads, front axle- For the original brake caliper- Optimally compatible with MOVIT brake discs- Enlarged friction surface- Even heat transfer- Longer service life- With road approval- Low noise development- Lower system temperature for the perfect coefficient of frictionMOVIT comfort brake pads, front axle- Enlarged friction surface- Even heat transfer- Lower system temperature- Longer service lifeMOVIT steel flex lines, front and rear axle- Better response behaviour of the brake system- Durable quality (does not become porous and therefore does not leak)- Brake line does not expand under pressure- Harder and more constant pressure point- Improved modulation Scope of delivery: - 2x brake disc perforated left/right incl. brake pot - 1x mounting material - 1x installation instructions and running-in instructions - 1x parts certificate - 2x sports / comfort brake pad (only bundle 2+3) - 2x steel flex lines VA + HA (only bundle 3) Compatible vehicles:Audi A3 (8Y) RS3 quattro 294kW / 400PS / 2480cm³Audi A3 (8Y) RS3 quattro 299kW / 407PS / 2480cm³Audi Q3 (F3) RSQ3 quattro 294kW / 400PS / 2480cm³Cupra Formentor (KM7) VZ5 2.5 TSI 287kW / 390PS / 2480cm³ / 4Drive Notes:When installing the upgrade kit, we always recommend replacing the brake pads, as the use of used pads on new brake discs is not recommended.When installed in our factory, the conversion is carried out exclusively with new brake pads!

A powerful brake is one of the most important components in motorsport. With these upgrade kits, the necessary balance of performance, weight and durability has been perfectly combined through the uncompromising selection of materials, so that this product can meet the high demands of extreme automotive applications. To achieve this, MOV'IT has increased the diameter and thickness of the brake discs and used more cross holes. Each pre-cast hole is re-drilled and countersunk to achieve a more favourable flow. The brake disc's optimised DDE ventilation system has an 80% larger surface area compared to other brake discs, resulting in a significant reduction in temperature and wear. Attention: The conversion means that only rims with at least 19 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. Bundle Street 1: - Upgrade kit front axle, 382mm, 2-piece disc, slotted - incl. parts certificate Bundle Street 2 (+ sports / comfort brake pads): - Upgrade kit front axle, 382mm, 2-piece disc, slotted - MOVIT sports or comfort brake pads - incl. parts certificate Street 3 bundle (+ sports / comfort brake pads + steel flex lines): - Upgrade kit front axle, 382mm, 2-piece disc, slotted - MOVIT sports or comfort brake pads - Steel flex lines for front and rear axle - incl. parts certificate Details:MOVIT steel brake discs, 2-piece- Highly efficient DDE cooling system- Maximum fading protection- Double, directional ventilation- Perforated for optimum response behaviour even on wet roads- Special alloy for high thermal conductivityMOVIT sports brake pads, front axle- For the original brake caliper- Optimally compatible with MOVIT brake discs- Enlarged friction surface- Even heat transfer- Longer service life- With road approval- Low noise development- Lower system temperature for the perfect coefficient of frictionMOVIT comfort brake pads, front axle- Enlarged friction surface- Even heat transfer- Lower system temperature- Longer service lifeMOVIT steel flex lines, front and rear axle- Better response behaviour of the brake system- Durable quality (does not become porous and therefore does not leak)- Brake line does not expand under pressure- Harder and more constant pressure point- Improved modulation Scope of delivery: - 2x brake disc slotted left/right incl. brake pot - 1x mounting material - 1x installation instructions and running-in instructions - 1x parts certificate - 2x sports / comfort brake pad (only bundle 2+3) - 2x steel flex lines VA + HA (only bundle 3) Compatible vehicles:Audi A3 (8Y) RS3 quattro 294kW / 400PS / 2480cm³Audi A3 (8Y) RS3 quattro 299kW / 407PS / 2480cm³Audi Q3 (F3) RSQ3 quattro 294kW / 400PS / 2480cm³Cupra Formentor (KM7) VZ5 2.5 TSI 287kW / 390PS / 2480cm³ / 4Drive Notes:When installing the upgrade kit, we always recommend replacing the brake pads, as the use of used pads on new brake discs is not recommended.When installed in our factory, the conversion is carried out exclusively with new brake pads!

The Charge and Boost Pipe Kit is suitable for the: Audi RS3 8V Sportback/Sedan 294KW/400PS 07/2021+ The Charge and Boost Pipe Kit for the Audi RS3 8Y 2.5 TFSI is the perfect addition for demanding drivers looking for more power and a modern look. This kit has been specifically designed to maximise the efficiency of your supercharged engine while maintaining the Original Equipment Manufacturer (OEM) look. High quality materials: The charge pipes and boost pipes are made from high-strength aluminium to ensure durability and reliability. The black matt finish gives your engine bay an elegant and sporty touch. Optimised airflow: The precisely shaped pipes ensure a smooth flow of air from the turbocharger to the intercooler and on to the intake manifold. This minimises pressure loss and increases performance. OEM look: The kit has been designed to fit seamlessly into the original look of your Audi RS3 8Y 2.5 TFSI. The black matt finish blends in perfectly with the engine bay, giving your vehicle a subtle yet eye-catching style. Easy installation: The kit comes with all the necessary mounting hardware and can be installed without any complex modifications. Detailed instructions are included to make installation easy. Experience the power and style of the Charge and Boost Pipe Kit for your Audi RS3 8Y 2.5 TFSI. Order today and take your driving experience to the next level! ATTENTION:The Wagner Tuning Charge and Boost Pipe Kit is only suitable for use with the Wagner Tuning Competition Intercooler Kit EVO X Audi RS3 8Y 2.5 TFSI. Attention: Not authorised in the area of the StVZO.

The Wagner Tuning Competition Intercooler Kit EVO 1 for Audi RS3 8V / 8Y and TTRS 8S is suitable for:Audi RS3 8V Sportback 270KW/367PS 04/2015-04/2016Audi RS3 8V Sportback/Sedan 294KW/400PS 08/2017+Audi RS3 8Y Sportback/Sedan 294KW/400PS 2021+Audi TTRS 8S 294KW/400PS 11/2016+Audi RSQ3 F3 294KW/400PS 10/2019+Ready to give your Audi RS3 8V an impressive performance boost? The Competition high performance intercooler kit EVO1 is the answer you've been waiting for. With state-of-the-art technology and a customised design, this kit ensures an exciting driving experience. This high performance intercooler redefines performance. With mesh dimensions of 660mmx180mmx110mm and a mesh volume of 13,070 cm³, it offers an impressive 14% larger flow area and an astonishing 57% more charge air volume compared to the standard intercooler. The result? An explosive increase in performance and exceptional cooling capacity. Our intercooler is equipped with a high-quality Tube Fin mesh that uses internal turbulators to optimise airflow. Despite its impressive size, this cooler weighs just 8.3kg, meaning you get more power without the extra weight. Our cast aluminium end boxes were developed in the CAD system and optimised with flow analyses in the CFD system to perfect the internal airflow. The result is excellent cooling properties with minimal back pressure. Our kit is a completely ready-to-install package that allows for easy replacement of the standard intercooler - a true plug-and-play experience. No complex adjustments required. All our intercoolers are equipped with an anti-corrosion coating that not only protects against environmental influences, but also offers excellent heat conduction properties. This ensures constant and optimum cooling performance, accompanied by a significant increase in performance. Our product has been tested to withstand pressures of up to 6 bar in order to offer you reliability at the highest level. Quality is our top priority. All our products are subject to rigorous quality control to ensure they meet the highest standards. Designed specifically for racing, this kit offers the performance and reliability you need to excel on the track. Realise your performance dreams with the Competition high performance intercooler kit EVO1. Get the most out of your Audi RS3 8V now and experience a new dimension of driving pleasure! Advantages of the Wagner Tuning intercooler:- improved cooling performance- 14 % larger inflow area- 57 % more charge air volume- flow-optimised- Plug & Play Dimensions original intercooler:640mm x 163mm x 80mmV=8.3 litresA=1043 cm² Wagner Tuning intercooler dimensions:660mm x 180mm x 110mmV=13.07 litresA=1188 cm² Scope of delivery:1 intercooler (black coated)1 assembly instruction Attention: Not authorised in the area of the StVZO.

The EVO 1 Competition intercooler kit is suitable for the:Audi RS3 8V Sportback/Sedan 294KW/400hp 07/2021+ Discover the true potential of your vehicle with the revolutionary Competition high-performance intercooler. This innovative upgrade catapults your performance to a whole new level and gives you an unparalleled driving experience. With impressive mesh dimensions of 660mm x 180mm x 110mm and a flow area 14% larger than the original, the Competition High Performance Intercooler offers a staggering 57% increase in charge air volume. The high-quality Tube Fin mesh with internal turbulators ensures optimum cooling and maximum performance. Despite its size, the intercooler is surprisingly light, weighing just 8.3 kg. The cast aluminium end boxes have been optimized using advanced flow analysis in the CFD system and ensure excellent cooling properties with minimal back pressure. In addition, the intercooler is equipped with an anti-corrosion coating with excellent heat conduction properties. This enables permanent and optimum cooling with a significant increase in performance. The Competition high-performance intercooler kit is supplied completely ready for installation and can be effortlessly replaced with the standard intercooler - a real plug-and-play experience. With a pressure resistance of up to 6 bar, the intercooler has been extensively tested and demonstrates its outstanding stability under extreme conditions. Like all our products, this intercooler is subject to strict quality control in order to meet the highest standards. It goes without saying that it is also ideally suited for racing. Prepare to unleash the full potential of your vehicle and achieve a noticeable increase in performance. Choose the competition high-performance intercooler and experience a whole new dimension of performance and driving pleasure. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 14% larger inflow area- 57% larger charge air volume- Optimized flow behavior- Less back pressure- Plug & Play Dimensions original intercooler:640mm x 163mm x 80mmV=8.3 litersA=1043 cm² Wagner Tuning intercooler dimensions:660mm x 180mm x 110mmV=13.07 litersA=1188 cm² Scope of delivery:1 intercooler (black coated)1 air duct1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.

The EVO X Competition intercooler kit is suitable for the:Audi RS3 8V Sportback/Sedan 294KW/400hp 07/2021+ Get ready to unleash the full potential of your vehicle and experience a whole new dimension of performance and driving pleasure. With our Wagner Tuning high-performance intercooler, you can achieve impressive power increases and maximum vehicle performance. Thanks to its impressive mesh dimensions of 600 mm x 395 mm x 135 mm [stepped] (28.9L), this intercooler offers a 127% larger flow area and an incredible 250% more charge air volume compared to the original. The newly developed competition high performance mesh ensures sufficient airflow to the adjacent components such as the water cooler and thus guarantees optimum cooling conditions. This high-quality Tube Fin mesh with internal turbulators enables the intercooler to be filled evenly and achieves excellent cooling properties with minimal back pressure. This makes this kit perfect for racing and demanding driving conditions. Our intercoolers also have an anti-corrosion coating, which not only ensures protection against environmental influences, but also enables long-lasting and optimum cooling with a significant increase in performance. The cast aluminium end boxes are specially optimized and have been perfected under flow analysis in the CFD system to ensure the best possible airflow. The stable unit consisting of intercooler and crossbar weighs just 18.0 kg thanks to the new Competition high-performance mesh, which has also contributed to the weight reduction. It is easy to fit to the original mounting points and requires no additional effort (1:1 replacement). With a pressure test of up to 6 bar, we prove the pressure stability and reliability of our products. When developing this high-performance intercooler, the focus was on the best possible internal throughput with Ø82 mm inlets and outlets. As a result, the air flow is optimally directed and optimum performance is achieved. Choose our competition high-performance intercooler and experience an incomparable increase in performance that will catapult you into a new world of driving pleasure. Our product stands for the highest quality and is subject to continuous qualitative monitoring to meet your requirements. What are you waiting for? Discover the limits of your vehicle and exceed them with our Wagner Tuning high-performance intercooler. Advantages of the intercooler kit:- Improved cooling performance- 127% larger inflow area- 250% charge air volume- Stability thanks to integrated crossbar- Low weight (18kg)- Plug & Play OEM intercooler:640mm x 163mm x 80mmV=8.3 litersA=1043 cm² Wagner Tuning EVO X Competition:600mm x 395mm x 135mm [stepped]V=28.9 litersA=2370 cm² Scope of delivery intercooler single:1 intercooler together with the crossbar2 silicone hoses1 air baffle1 fixing material1 installation instruction Scope of delivery intercooler with charge air pipe:1 intercooler together with the crossbar1 air baffle1 cast aluminum charge pipe1 cast aluminum boost pipe3 silicone hoses1 Mounting material1 installation instructionAttention: Not approved in the area of the StVZO.

Material: Carbon Manufacturer: Eventuri Parts certificate: Material certificate Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine type Audi A3 (8V)RS3 quattro294kW / 400hp2480cm³DAZA, DNWA Audi A3 (8Y)RS3 quattro294kW / 400hp2480cm³DNWC Audi TT (8J1/8S)TTRS quattro294kW / 400hp2480cm³DAZA, DNWA Audi Q3 (F3) 2019+RSQ3 quattro294kW / 400hp2480cm³DAZA, DNWA Cupra Formentor (KM)VZ5 4Drive287kW / 390hp2480cm³DNWB

Facts: Power increase (RS3 with standard turbo): 15-20 hp, 13-18ft-lb Flow measurement data: stock intake 530 CFM : Eventuri intake 840 CFM Material: Carbon fibre Manufacturer: Eventuri Parts certificate: Certification is available for this product for certain regions and vehicles (details below) Summary of Dyno results: Stock airbox with modified stock turbo intake for TTE700 = 576.5 hp Eventuri stage 3 intake with modified stock turbo inlet for TTE700 = 606.5 hp Eventuri stage 3 intake with Eventuri turbo inlet for TTE700 = 620.8 hp Suitable for: Audi 8Y RS3 2020+ After our 8V RS3 system, we have now also included the 8Y system in our programme. The 8Y RS3 intake system is suitable for all power levels, from standard equipment to those with more than 1000 hp. This intake system has been developed to provide the highest possible flow rate whilst achieving the lowest possible intake temperatures. Every component has been designed to give the turbo a smooth and free flow path. The intake pipe has an internal diameter of 103mm or just over 4? and has a smooth bend from the filter housing to the turbo inlet. The filter itself has been specifically designed for this inlet and has a huge outer diameter of 210mm or 8.3? with a filter area of over 130,000mm^2. The patented Venturi housing has been designed to provide the maximum possible internal volume for the RS3 engine bay and provides laminar flow to the turbo pipe. Finally, the duct seals the filter opening to the front slam plate, but is not restricted only by the stock intake opening. We have raised the front of the duct to now create an additional opening behind the bonnet, equivalent to an extra 7? diameter hole from which air can be drawn in. The resulting system has the ability to lift 840 CFM at 28? H2O while keeping intake temperatures to a minimum with the sealed design. Flow tests We conducted tests with a Superflow SF-1020 to measure the maximum possible flow rate at a pressure drop of 28" H2O. The tests were conducted on the same day under controlled conditions using the same test fixture for each system. We tested our complete intake system against the stock airbox system. The results show how restrictive the stock airbox is, which we were able to improve by up to 58% in maximum possible flow rate. Importantly, this was achieved with a sealed intake system so that intake temperatures are also kept to a minimum. Dyno tests Our RS3 intake system has been tested by various renowned tuners worldwide who have built high performance RS3/TTRS projects for road and track use. The first results come from MSL Performance, who tested our system on a stock 8Y RS3. The tests were carried out back-to-back on the same day. As you can see, there is a measurable gain across the rev range of up to 22bhp. This gain is noticeable even on a standard vehicle on the road due to better throttle response and faster acceleration. Parts certificate The manufacturer's specifications apply to installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT Audi RS3 e1*xx/xx*0608*06 DE/AT Audi RS3 (8V) from e1*xx/xx*0608*06 DE/AT Audi RS3 (8V) e1*2007/46*0608*08 DE/AT Audi RS3 (8Y) e1*2007/xx*2144*.. DE/AT Audi RSQ3 (F3) e1*xx/xx*2038*.. DE/AT Audi TTRS (8J) e1*xx/xx*1686*.. DE/AT Cupra Formentor VZ5 e9*xx/xx*4008*.. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine type Audi A3 (8Y)RS3 quattro294kW / 400hp2480cm³DNWC Cupra Formentor (KM)VZ5 4Drive287kW / 390hp2480cm³DNWB

KW coilover springs The spring set with stepless lowering KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active. Setup - sporty and harmonious spring rates The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range. Stepless lowering Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles. Please note the conditions and instructions for this product: - VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers) Technical information: Lowering VA/HA (mm): 0-15/0-20 Adjustment VA/HA: Thread Approval: Parts certificate (§19.3) Scope of delivery: Set (VA+HA) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A3 Sedan (GY) 8YS 04/2020- RS3 quattro notchback Petrol 294 KW 2480 ccm 5 All-wheel drive AUDI A3 Sedan (GY) 8YS 04/2020-     RS3 quattro notchback petrol 299 KW 2480 ccm 5 all-wheel drive AUDI A3 Sportback (GY) 8YA 11/2019- RS3 quattro hatchback petrol 294 KW 2480 ccm 5 all-wheel drive AUDI A3 Sportback (GY) 8YA 11/2019- RS3 quattro hatchback petrol 299 KW 2480 ccm 5 all-wheel drive

KW coilover suspension DDC "Plug & Play" The "Plug & Play" solution for vehicles with standard electronic damper adjustment.KW also offers you the possibility to combine the active standard damper control of your sporty vehicle with the stainless steel KW DDC Plug & Play coilover suspension. This means that you can continue to use the existing active damper control in your car such as the VW Scirocco, VW Golf VI, VW Passat, BMW Dreier and other models in conjunction with a continuously variable lowering system.The best thing about it: Apart from replacing the adaptive standard suspension with the KW DDC Plug & Play coilover suspension, no further conversion steps or even modifications to the on-board electronics are necessary. The adaptive KW dampers are simply connected to the original connectors of your car manufacturer via the KW DDC plug connection. The standard control unit then takes over the regulation and control of the KW DDC Plug & Play coilover suspension. Perfect symbiosis of an OEM control unit with the advantages of an adaptive KW coilover suspensionOur suspension technology is compatible with the electronics of various car manufacturers. This means that the adaptive KW DDC Plug & Play coilover suspension is immediately recognised by the on-board electronics. All displays and controls of your standard vehicle remain fully functional and combine the advantages of an adaptive damping system with the stylish and sporty lowering of a high-quality KW coilover suspension. Thanks to the exclusive use of rust-free stainless steel and durable components, the functionality of the rust-free KW coilovers is maintained under all weather conditions. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, adjustment is also possible after a snowy winter, for example. No oxidation occurred on the KW threaded spring legs during a salt spray test. This means that the adjustment of the stepless lowering is not affected even after years. - the plug & play solution for sportiness or more ride comfort at the touch of a button with outstanding looks thanks to stepless lowering- Compatible with the standard suspension control unit- Vehicle-specific damper set-ups such as Comfort / Normal / Sport- Operation via series buttons in the interior Please note the conditions and instructions for this product:- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper)- Only for vehicles with electronic damper control Technical information:Lowering VA/HA (mm): 20-40/25-45Level change (mm) between: VA and / HA andVersion: DDC - Plug & PlayHardness adjustment: Rebound and compression dampingMaterial: Stainless steelAdjustment VA/HA: thread/threadApproval: Parts certificate (§19.3) Compatible vehicles:AUDI A3 Sedan (GY) 8YS 04/2020- RS3 quattro notchback petrol 294 KW 2480 ccm 5 all-wheel driveAUDI A3 Sedan (GY) 8YS 04/2020- RS3 quattro notchback petrol 299 KW 2480 ccm 5 all-wheel driveAUDI A3 Sportback (GY) 8YA 11/2019- RS3 quattro hatchback petrol 294 KW 2480 ccm 5 all-wheel driveAUDI A3 Sportback (GY) 8YA 11/2019- RS3 quattro hatchback petrol 299 KW 2480 ccm 5 all-wheel drive

KW V3 coilover suspension Unlimited individuality for performance & comfort. Separate damper force adjustment for rebound and compression damping.As with every KW coilover suspension, our suspension engineers also develop a sporty and harmonious basic set-up for the vehicle-specific applications of the KW V3. In addition to tests on our KW 7-post driving dynamics test bench, we also carry out extensive test drives on country roads, the motorway and even on the Nürburgring Nordschleife, kilometre by kilometre, to guarantee you the perfect suspension set-up. For years, the KW V3, one of the world's top aftermarket products, has been the reference for coilover suspensions. With its damper characteristics, high-quality workmanship and excellent durability, it has impressed discerning sports car drivers, tuners, large and small series manufacturers such as Alpina, MTM, Manthey, Oettinger and many other well-known companies in the international automotive industry. Cutting-edge technology from motorsportYou get much more than a sporty lowering and excellent handling on all roads with the KW V3. It is based on our many years of experience as a suspension manufacturer and supplier in international motorsport, such as in the ADAC GT Masters touring car series, FIA GT1, FIA GT3, International GT Open, WTC, VLN and also in the legendary ADAC Zurich 24h Race Nürburgring.Similar to our racing coilovers from the KW Competition programme, the rebound and compression damping of the KW V3 can be adjusted independently of each other. This individual tuning option is appreciated by tuners, sports car manufacturers, tuners and demanding drivers worldwide. The perfect suspension setup for significantly more driving dynamicsIf you have already carried out initial performance modifications to your sporty road vehicle, it is easy to incorporate these into the damper set-up in a targeted manner with the KW V3. The patented KW valve technology for the separate adjustment of the rebound and compression damping allows you to customise the vehicle-specific basic set-up from KW. For example, the KW bottom valve, which can be adjusted in twelve clicks in the low-speed range of the compression damping, gives you the freedom to even take the tyre characteristics of your high and ultra-high performance road tyres into account in the suspension set-up.Thanks to the patented compression adjustment at the lower piston end of the stainless steel housing, you don't even need any tools. The adjustable compression adjustment with its twelve precise clicks allows you to influence body roll and body roll movements by hand without having to change the rebound damping to match the spring rate.With the individually adjustable rebound damping of the KW V3, you can directly influence the handling and comfort through the exact click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery.By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car tracks more accurately and you have even more stability at higher cornering speeds. If, for example, you change from the approved wheel/tyre combinations of your car manufacturer to larger rims, you can use the KW V3 to perfectly match the handling of your car and your new alloy wheels. High-quality, customised and durableThe KW V3 is subjected to extensive quality tests during production and every single damper is checked. This is the only way we can fulfil our claim to provide a warranty of up to five years when a KW coilover suspension V3 is installed by a KW specialist dealer. Due to the filigree workmanship and the use of high-quality components, the KW coilover struts made of stainless steel, for example, are 100 per cent rust-free and have an unlimited service life.This means that the functionality of the stepless lowering system via the dirt-resistant KW trapezoidal thread and the KW polyamide threaded ring is not impaired even after many years. Thanks to the individual lowering with its stepless adjustment range, you can also emphasise the sportiness of your vehicle visually. A feature that is very popular in the performance-orientated tuning scene. - Freely adjustable damping technology in rebound and compression damping- inox-line stainless steel technology- Individual, stepless lowering- Tested adjustment range- high-quality components for a long service life- adjustable rebound damping with 16 exact clicks- 12-way adjustable compression damping with click adjustment- Unique, independently acting damping force adjustment Setup: The individually adjustable rebound & compression damping of the KW V3The KW V3 is the ideal accessory for performance-orientated drivers and tuning enthusiasts who demand a high level of sportiness from their vehicles. The dampers, which are separately adjustable in rebound and compression, allow extensive damper tuning with their sophisticated click adjustment. This makes it easy to directly influence the turn-in behaviour, directional stability, tyre grip and handling characteristics for safe controllability at the limit. Please note the conditions and instructions for this product:- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper)- For vehicles with electronic damper control, this must be deactivated.- Only for vehicles with a clamping diameter on the VA of 55mm- The dampers have easy-to-operate adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible. Technical information:Lowering VA/HA (mm): 20-40/25-45Level change (mm) between: VA and / HA andVersion: V3Hardness adjustment: Rebound and compressionMaterial: Stainless steelAdjustment VA/HA: thread/threadStrut clamping diameter VA (mm): 55Approval: Parts certificate (§19.3) Compatible vehicles:AUDI A3 Sedan (GY) 8YS 04/2020- RS3 quattro notchback petrol 294 KW 2480 ccm 5 all-wheel driveAUDI A3 Sedan (GY) 8YS 04/2020- RS3 quattro notchback petrol 299 KW 2480 ccm 5 all-wheel driveAUDI A3 Sportback (GY) 8YA 11/2019- RS3 quattro hatchback petrol 294 KW 2480 ccm 5 all-wheel driveAUDI A3 Sportback (GY) 8YA 11/2019- RS3 quattro hatchback petrol 299 KW 2480 ccm 5 all-wheel drive

KW V3 coilover suspension Unlimited individuality for performance & comfort. Separate damper force adjustment for rebound and compression damping.As with every KW coilover suspension, our suspension engineers also develop a sporty and harmonious basic set-up for the vehicle-specific applications of the KW V3. In addition to tests on our KW 7-post driving dynamics test bench, we also carry out extensive test drives on country roads, the motorway and even on the Nürburgring Nordschleife, kilometre by kilometre, to guarantee you the perfect suspension set-up. For years, the KW V3, one of the world's top aftermarket products, has been the reference for coilover suspensions. With its damper characteristics, high-quality workmanship and outstanding durability, it has impressed discerning sports car drivers, tuners, large and small series manufacturers such as Alpina, MTM, Manthey, Oettinger and many other well-known companies in the international automotive industry. Cutting-edge technology from motorsportYou get much more than a sporty lowering and excellent handling on all roads with the KW V3. It is based on our many years of experience as a suspension manufacturer and supplier in international motorsport, such as in the ADAC GT Masters touring car series, FIA GT1, FIA GT3, International GT Open, WTC, VLN and also in the legendary ADAC Zurich 24h Race Nürburgring.Similar to our racing coilovers from the KW Competition programme, the rebound and compression damping of the KW V3 can be adjusted independently of each other. This individual tuning option is appreciated by tuners, sports car manufacturers, tuners and demanding drivers worldwide. The perfect suspension setup for significantly more driving dynamicsIf you have already carried out initial performance modifications to your sporty road vehicle, it is easy to incorporate these into the damper set-up in a targeted manner with the KW V3. The patented KW valve technology for the separate adjustment of the rebound and compression damping allows you to customise the vehicle-specific basic set-up from KW. For example, the KW bottom valve, which can be adjusted in twelve clicks in the low-speed range of the compression damping, gives you the freedom to even take the tyre characteristics of your high and ultra-high performance road tyres into account in the suspension set-up.Thanks to the patented compression adjustment at the lower piston end of the stainless steel housing, you don't even need any tools. The adjustable compression adjustment with its twelve precise clicks allows you to influence body roll and body roll movements by hand without having to change the rebound damping to match the spring rate.With the individually adjustable rebound damping of the KW V3, you can directly influence the handling and comfort through the exact click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery.By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car tracks more accurately and you have even more stability at higher cornering speeds. If, for example, you change from the approved wheel/tyre combinations of your car manufacturer to larger rims, you can use the KW V3 to perfectly match the handling of your car and your new alloy wheels. High-quality, customised and durableThe KW V3 is subjected to extensive quality tests during production and every single damper is checked. This is the only way we can fulfil our claim to provide a warranty of up to five years when a KW coilover suspension V3 is installed by a KW specialist dealer. Due to the filigree workmanship and the use of high-quality components, the KW coilover struts made of stainless steel, for example, are 100 per cent rust-free and have an unlimited service life.This means that the functionality of the stepless lowering system via the dirt-resistant KW trapezoidal thread and the KW polyamide threaded ring is not impaired even after many years. Thanks to the individual lowering with its stepless adjustment range, you can also emphasise the sportiness of your vehicle visually. A feature that is very popular in the performance-orientated tuning scene. - Freely adjustable damping technology in rebound and compression damping- inox-line stainless steel technology- Individual, stepless lowering- Tested adjustment range- high-quality components for a long service life- adjustable rebound damping with 16 exact clicks- 12-way adjustable compression damping with click adjustment- Unique, independently acting damping force adjustment Setup: The individually adjustable rebound & compression damping of the KW V3The KW V3 is the ideal accessory for performance-orientated drivers and tuning enthusiasts who demand a high level of sportiness from their vehicles. The dampers, which are separately adjustable in rebound and compression, allow extensive damper tuning with their sophisticated click adjustment. This makes it easy to directly influence the turn-in behaviour, directional stability, tyre grip and handling characteristics for safe controllability at the limit. Please note the conditions and instructions for this product:- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper)- For vehicles with electronic damper control, this must be deactivated.- Only for vehicles with a clamping diameter on the VA of 55mm- The dampers have easy-to-operate adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible. Technical information:Lowering VA/HA (mm): 25-50/25-50Level change (mm) between: VA and / HA andVersion: V3Hardness adjustment: Rebound and compressionMaterial: Stainless steelAdjustment VA/HA: thread/threadStrut clamping diameter VA (mm): 55Approval: Parts certificate (§19.3) Compatible vehicles:Manufacturer Model Version Body Fuel Performance Displacement Cylinder DriveAUDI A3 Sedan (GY) 8YS 04/2020- 40 TDI quattro notchback diesel 147 KW 1968 ccm 4 all-wheel driveAUDI A3 Sedan (GY) 8YS 04/2020- 40 TFSI quattro notchback petrol 140 KW 1984 ccm 4 all-wheel driveAUDI A3 Sedan (GY) 8YS 04/2020- S3 quattro notchback petrol 228 KW 1984 ccm 4 all-wheel driveAUDI A3 Sedan (GY) 8YS 04/2020- S3 quattro notchback petrol 245 KW 1984 ccm 4 all-wheel driveAUDI A3 Sportback (GY) 8YA 11/2019- 40 TDI quattro hatchback diesel 147 KW 1968 ccm 4 all-wheel driveAUDI A3 Sportback (GY) 8YA 11/2019- 40 TFSI quattro hatchback petrol 140 KW 1984 ccm 4 all-wheel driveAUDI A3 Sportback (GY) 8YA 11/2019- S3 quattro hatchback petrol 228 KW 1984 ccm 4 all-wheel driveAUDI A3 Sportback (GY) 8YA 11/2019- S3 quattro hatchback petrol 245 KW 1984 ccm 4 all-wheel driveSKODA OCTAVIA IV (NX3) 01/2020- 2.0 RS hatchback petrol 195 KW 1984 cc 4 front-wheel driveSKODA OCTAVIA IV (NX3) 01/2020- 2.0 TDI Hatchback Diesel 147 KW 1968 ccm 4 Front-wheel driveSKODA OCTAVIA IV (NX3) 01/2020- 2.0 TSI RS Hatchback Petrol 180 KW 1984 ccm 4 Front-wheel driveSKODA OCTAVIA IV Combi (NX5) 11/2019- 2.0 RS Combi Petrol 195 KW 1984 ccm 4 Front-wheel driveSKODA OCTAVIA IV Combi (NX5) 11/2019- 2.0 TDI Estate Diesel 147 KW 1968 ccm 4 front-wheel driveSKODA OCTAVIA IV Combi (NX5) 11/2019- 2.0 TSI RS Estate Petrol 180 KW 1984 ccm 4 Front-wheel driveVW GOLF VIII (CD1) 07/2019- 1.4 GTE Hatchback petrol/electric 110 KW 1395 ccm 4 front-wheel driveVW GOLF VIII (CD1) 07/2019- 1.4 GTE PLUG-IN HYBRID Hatchback Petrol/Electric 132 KW 1395 ccm 4 Front-wheel drive

KW V4 Clubsport coilover suspension incl. support bearings With an uncompromising technology transfer from racing to the road, the KW Clubsport coilovers convince. The KW Clubsport coilovers convince with their uncompromising combination of high-end racing technology with maintenance-free KW original equipment components and expertises. This gives you the ideal accessories to realise the full potential of your sports car at trackdays, sports driver training courses, tourist drives on Grand Prix circuits and on the Nürburgring Nordschleife. Developed for the toughest racetrack in the world: the Nürburgring Nordschleife Even in their basic set-up, KW Clubsport coilovers are tuned to the different track surfaces, steep bends, jumps and chicanes of the 20.8 kilometre long Nürburgring Nordschleife. After all, as one of the most successful suspension manufacturers and suppliers in motorsport, we are at home on the Nordschleife. In the VLN Endurance Championship alone, we equip over 70 racing teams and, as a suspension manufacturer, have been able to support six overall victories at the ADAC Zurich 24h Race Nürburgring in ten years. The winner of the ADAC GT Masters 2011 also relies on our racing expertise, from which the KW Clubsport coilovers benefit. The basic setup of the KW V3 Clubsport and KW V4 Clubsport with separate reservoir, which is perfectly adapted to the Nordschleife, allows you to customise your sports car even more individually to the desired sports tyre setup thanks to the numerous adjustment options. KW V4 Clubsport coilover suspension The vehicle-specific basic setup of the KW V4 Clubsport, developed in numerous test and measurement drives on the Nordschleife and the KW 7-post driving dynamics test bench, can be further adapted to your wheel loads, vehicle weight and the modified body stiffness, for example with a bolted cage, welded-in safety cell or strut braces, using the click adjustment. Similar to the KW Competition racing suspensions used in international motorsport, the KW V4 Clubsport coilover suspension allows the compression damping to be fine-tuned separately in the low-speed and high-speed range. The click adjustment of the patented KW two-valve control takes place directly on the expansion tank. You can vary the low-speed compression damping by hand with six precise clicks on the purple-coloured adjustment wheel. The gold-coloured adjustment wheel underneath allows you to change the high-speed compression stage of the recommended basic setup for your track day with 14 exact clicks. Independently of this, you still have 16 clicks at your disposal to noticeably adjust the rebound setting. If you want to tune the KW V4 Clubsport coilover suspension, which is available with an expert opinion, more comfortably for your journey to the Nordschleife or other race track for driving on the motorway, simply reduce the rebound forces via the rebound damping. - freely adjustable damping technology with 16 precise clicks in the rebound stage - adjustable compression damping with 6 clicks in the low-speed range and 14 exact clicks in the high-speed range - infinitely variable lowering - Tested adjustment range - high-quality components for a long service life - unique, independently acting damping force adjustment available with aluminium Unibal support bearings for technically sensible applications Setup: Application range and damper tuning The KW V4 Clubsport coilover suspensions impress with their vehicle-specific setup for trackday events on the Nürburgring Nordschleife, as well as the possibility of quickly adapting these suspensions to other racetracks and individual performance sports cars. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + dampers) - Vehicles with electronic damper control must be decommissioned. Vehicle-specific KW decommissioning kits can be found in the accessories table. - Only for vehicles with a clamping diameter on the VA of 55mm - The dampers have easy-to-operate adjustment wheels. Due to the design, the rebound damping can only be adjusted when the piston rod is accessible. - Clubsport suspension with support bearing: only available with VA support bearing Technical information: Lowering VA/HA (mm): 20-40/15-35 Version: V4 Clubsport Height adjustment: Rebound and compression damping Material: Stainless steel Adjustment VA/HA: thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A3 Sedan (GY) 8YS 04/2020- RS3 quattro notchback petrol 294 KW 2480 ccm 5 all-wheel drive AUDI A3 Sedan (GY) 8YS 04/2020- RS3 quattro notchback petrol 299 KW 2480 ccm 5 all-wheel drive AUDI A3 Sportback (GY) 8YA 11/2019- RS3 quattro hatchbackPetrol 294 KW 2480 ccm 5 all-wheel drive AUDI A3 Sportback (GY) 8YA 11/2019- RS3 quattro Hatchbackpetrol 299 KW 2480 ccm 5 all-wheel drive AUDI TT (FV) FV3, 8J, 8J1 07/2014- 2.0 TDI quattro Coupe Diesel 135 KW 1968 ccm 4 all-wheel drive AUDI TT (FV) FV3, 8J, 8J1 07/2014- 2.0 TFSI quattro Coupe petrol 169 KW 1984 ccm 4 all-wheel drive AUDI TT (FV) FV3, 8J, 8J1 07/2014- 2.0 TTS quattro Coupe petrol 210 KW 1984 ccm 4 all-wheel drive AUDI TT (FV) FV3, 8J, 8J1 07/2014- 2.0 TTS quattro Coupe petrol 215 KW 1984 ccm 4 all-wheel drive AUDI TT (FV) FV3, 8J, 8J1 07/2014- 2.0 TTS quattro Coupe petrol 225 KW 1984 ccm 4 all-wheel drive AUDI TT (FV) FV3, 8J, 8J1 07/2014- 2.0 TTS quattro Coupe petrol 228 KW 1984 ccm 4 all-wheel drive AUDI TT (FV) FV3, 8J, 8J1 07/2014- 2.5 RS quattro Coupe Petrol 294 KW 2480 ccm 5 all-wheel drive AUDI TT (FV) FV3, 8J, 8J1 07/2014- 45 TFSI quattro CoupePetrol 180 KW 1984 ccm 4 all-wheel drive AUDI TT (FV) FV3, 8J, 8J1 07/2014- TTS Coupe quattro CoupePetrol 235 KW 1984 cc 4 all-wheel drive AUDI TT Roadster (FV) FV9, 8J, 8J1 11/2014- 2.0 TDI quattro Cabriolet Diesel 135 KW 1968 ccm 4 all-wheel drive AUDI TT Roadster (FV) FV9, 8J, 8J1 11/2014- 2.0 TFSI quattro Cabriolet petrol 169 KW 1984 ccm 4 all-wheel drive AUDI TT Roadster (FV) FV9, 8J, 8J1 11/2014- 2.0 TFSI quattro convertible petrol 215 KW 1984 ccm 4 all-wheel drive AUDI TT Roadster (FV) FV9, 8J, 8J1 11/2014- 2.0 TTS quattro Cabriolet petrol 210 KW 1984 ccm 4 all-wheel drive AUDI TT Roadster (FV) FV9, 8J, 8J1 11/2014- 2.0 TTS quattro Cabriolet petrol 225 KW 1984 ccm 4 all-wheel drive AUDI TT Roadster (FV) FV9, 8J, 8J1 11/2014- 2.0 TTS quattro Cabriolet Petrol 228 KW 1984 ccm 4 All-wheel drive AUDI TT Roadster (FV) FV9, 8J, 8J1 11/2014- 2.0 TTS TFSI QUATTRO Cabriolet petrol 235 KW 1984 ccm 4 all-wheel drive AUDI TT Roadster (FV) FV9, 8J, 8J1 11/2014- 2.5 RS quattro Cabriolet Petrol 294 KW 2480 ccm 5 all-wheel drive AUDI TT Roadster (FV) FV9, 8J, 8J1 11/2014- 45 TFSI quattro CabrioletPetrol 180 KW 1984 ccm 4 all-wheel drive

The upgrade engine water cooler kit is suitable for the: Audi RS3 8V Sportback/Sedan 294KW/400PS 07/2021+ Optimise the performance of your Audi RS3 8Y with the upgrade of the side-mounted engine water cooler. Our side-mounted Wagner Tuning water coolers are designed to directly replace the standard water coolers of your vehicle. By maximising the available installation space, we have been able to increase the size of the water coolers by an astonishing 132%. This significant increase in size, combined with the excellent thermal conductivity of our all-aluminium water radiators, offers significantly improved cooling efficiency. This is particularly suitable for vehicles that are heavily used on the racetrack or that require additional performance modifications. Our complete kit covers both the driver and passenger side and comes with additional brackets to ensure a smooth installation. Prepare your Audi RS3 8Y for peak performance and optimise its cooling system with our high-quality side engine water coolers. OEM water cooler dimensions:200 mm x 230 mm x 44 mmV = 1.84 litresA = 460 cm² Wagner Tuning water cooler dimensions:205 mm x 242 mm x 86 mmV = 4.27 litres (+132%)A = 496 cm² (+8%) Attention: Not authorised in the area of the StVZO.