Facts: - replaces the main catalytic converter - with 200-cell stainless steel sports catalytic converter and OPF - Euro 6 compatible - with ECE approval* Compatible vehicles: ManufacturerModelTypeEngine capacity (litres)Power (kW)Engine typeEmission standardCupraFormentorKM2.0180DNPAEuro 6d - OPFSkodaOctavia III RSNX2.0180DNPAEuro 6d - OPFVW GOLFGolf 8 GTICD2.0180DNPAEuro 6d - OPFVW GOLFGolf 8 GTI ClubsportCD2.0221DNFCEuro 6d - OPF Note: Depending on the software version, the engine control light may light up. We recommend a software adjustment in this case. *This downpipe has ECE approval so that it can be used within the scope of the German Road Traffic Licensing Regulations (StVZO) without registration in the vehicle documents.

Facts: - replaces the main catalytic converter - with/without 200 cell stainless steel sports catalytic converter and 2x OPF - Euro 6 compatible - with ECE approval* Compatible vehicles: ManufacturerModelTypeDisplacement (litres)Power (kW)Engine typeEmission standardAudiA3 40 TFSI quattroGY2.0140DNNAEuro 6d - OPFAudiS3 53 TFSI quattroGY2.0228DNFBEuro 6d - OPFAudiQ2 40 TFSI quattroGA2.0140DNNAEuro 6d - OPFAudiSQ2 quattroGA2.0221DNFCEuro 6d - OPFAudiTT 45 TFSI quattro8J2.0180DNPAEuro 6d - OPFAudiTT S quattro8J2.0235DNFDEuro 6d - OPFCupraAteca 4Drive5FP2.0140DNNAEuro 6d - OPFCupraAteca 4Drive5FP2.0221DNFCEuro 6d - OPFCupraFormentor 4DriveKM2.0140DNNAEuro 6d - OPFCupraFormentor VZ 4DriveKM2.0228DNFBEuro 6d - OPFCupraLeon IV ST 4DriveKL2.0228DNFBEuro 6d - OPFSkodaKaroq 4x4NU2.0140DNNAEuro 6d - OPFSkodaKodiaq 4x4NS2.0140DNNAEuro 6d - OPFSkodaKodiaq RS 4x4NS2.0180DNPAEuro 6d - OPFSkodaOctavia IV 4x4NX2.0140DNNAEuro 6d - OPFSkodaSuperb III 4x43Z2.0206DNFEEuro 6d - OPFVWArteon R 4motion3H2.0235DNFGEuro 6d - OPFVW GOLFGolf 8 R 4motionCD2.0235DNFGEuro 6d - OPFVWGolf 8 4motion / VariantCD2.0140DNNAEuro 6d - OPFVWPassat 4motion3C2.0206DNFEEuro 6d - OPFVWT-Roc R 4motionA12.0221DNFCEuro 6d - OPFVWT-Roc 4motionA12.0140DNNAEuro 6d - OPFVWTiguan R 4motion5N2.0235DNFGEuro 6d - OPF Note: Depending on the software version, the engine control light may light up. We recommend a software adjustment in this case. *This downpipe has ECE approval so that it can be used within the scope of the StVZO without registration in the vehicle documents.

Suitable for the following vehicles:Audi S3 8Y 2.0TFSI 228KW/310hp (from 10/2020 MKB: DNFB)Audi TT 8S 45TSI 180kW / 245hp (from 10/2020 MKB: DNPA)Audi TTS 8S 235KW/320hp (from 11/2020 MKB: DNFD)VW Golf VIII type CD2.0 GTI 180kW / 245hp (from 08/2020 MKB: DNPA)VW Golf VIII type CD2.0 GTI Clubsport 220KW/300hp (from 10/2020 MKB: DNFC)VW Golf VIII Type CD2.0 R 235KW/320hp (from 12/2020 MKB: DNFG)VW Passat B8 2.0TSI 206KW/280hp (from 11/2020 MKB:DNFE)VW Arteon (type 3H) 2.0TSI R 206-235KW / 280-320hp (from 12/2020 MKB: DNFE, DNFG)VW T-Roc R 221kW/300hp (from 10/2020 MKB: DNFC)Cupra Leon IV KL Cupra TSI 4Drive 228KW/310hp (from 02/2021 MKB: DNFB)Cupra Formentor VZ 2.0TSI 180kW / 245hp (from 03/2021 MKB: DNPA)Cupra Formentor VZ 2.0TSI 228kW / 310hp (from 11/2020 MKB: DNFB)Skoda Octavia NX 2.0 TSI RS 180kW / 245hp (from 09/2020 MKB: DNPA)Skoda Superb 3V 2.0TSI 206KW/280hp (from 11/2020 MKB:DNFE) With parts certificate! With our Wagner Tuning Competition intercooler, we offer you the perfect solution to exploit the full potential of your vehicle and experience an extraordinary driving experience. With impressive mesh dimensions of 620 mm x 440 mm x 65 mm and an external charge air volume of 17.7 liters (compared to 9 liters for OEM), this high-performance charge air cooler ensures optimum cooling of the charged air. Our newly developed competition high-performance mesh (Tube Fine) not only enables excellent cooling performance, but also ensures sufficient airflow for adjacent components such as the water cooler. The intercooler remains lightweight and weighs only 9.2 kg in total. The cast aluminium end boxes have been optimized using CAD technology and CFD simulations to achieve optimum internal airflow. An integrated air duct in the end box ensures even filling of the competition high-performance mesh. With an inlet and outlet diameter of Ø70 mm, this intercooler offers a significantly lower back pressure compared to the intercooler fitted as standard. In addition, all our charge air coolers are provided with a high-quality anti-corrosion coating, which not only ensures protection against environmental influences, but also has superior heat conduction properties. This ensures a long-lasting and optimum cooling effect with a noticeable increase in performance. Installation is carried out by simply replacing the OEM intercooler and is straightforward. You can rely on our constant quality monitoring to offer you only the highest quality products. Boost your vehicle's performance to a new level and rely on the Competition intercooler. Treat yourself to the upgrade your vehicle deserves! Important information!Our intercooler is currently only compatible with the 5Q0-121-251GN engine water cooler. We are currently working on a solution for vehicles equipped with the current 5WA121251H engine water cooler. Scope of delivery:1 intercooler2 silicone hoses4 hose clamps1 mounting material1 assembly instruction1 parts certificate With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

Facts: Material: Carbon Manufacturer: Eventuri We are pleased to release our carbon engine cover for the VW Golf 8 platform.Compatible vehicles: VehicleTypePowerEngine capacityEngine type Audi A3 (8Y)S3 2.0 TFSI quattro228kW / 310hp1984cm³DNFB (from 09.20) Audi TT (8J1/8S)45 TFSI quattro180kW / 245hp1984cm³DNPA (from 10.20) Audi TT (8J1/8S)TTS 2.0 TFSI quattro235kW / 320hp1984cm³DNFD (from 11.20) Audi Q3 (F3)45 TFSI quattro180kW / 245hp1984cm³DNPA (from 01.21) Cupra Ateca (KH)2.0 TSI 4Drive221kW / 300hp1984cm³DNFC (from 07.20) Cupra Formentor (KM)2.0 TSI 4Drive140kW / 190hp1984cm³DNPA (from 03.21) Cupra Formentor (KM)2.0 TSI180kW / 245hp1984cm³DNPA (from 03.21) Cupra Formentor (KM)2.0 TSI 4Drive228kW / 310hp1984cm³DNFB (from 11.20) Cupra Leon (KL)2.0 TSI180kW / 245hp1984cm³DNPA (from 04.21) Cupra Leon (KL)2.0 TSI221kW / 300hp228kW / 310hp1984cm³DNFC (from 01.21)DNFB (from 06.21) Seat Tarraco (KN)2.0 TFSI 4Drive180kW / 245hp1984cm³DNPA (from 01.21) Skoda KodiaqRS 2.0 TSI 4x4180kW / 245hp1984cm³DNPA (from 06.21) Skoda Octavia IV (NX)RS 2.0 TFSI180kW / 245hp1984cm³DNPA (from 09.20) Skoda Superb III (3V)2.0 TSI 4x4206kW / 280hp1984cm³DNFE (from 11.20) VW Arteon2.0 TSI 4motionR 2.0 TSI 4motion206kW / 280hp235kW / 320hp1984cm³DNFE (from 11.20)DNFG (from 12.20) VW Golf 8GTI 2.0 TSI180kW / 245hp1984cm³DNPA (from 08.20) VW Golf 8GTI Clubsport/ED45 2.0 TSI221kW / 300hp1984cm³DNFC (from 10.20) VW Golf 8R 2.0 TSI 4motion235kW / 320hp1984cm³DNFG (from 12.20) VW Passat B8 (3G)2.0 TSI 4motion206kW / 280hp1984cm³DNFE (from 11.20) VW T-Roc (A1 Facelift)2.0 TSI 4motion221kW / 300hp1984cm³DNFC (from 11.21) VW Tiguan II (AD)2.0 TSI 4motion180kW / 245hp1984cm³DNPA (from 11.20) VW Tiguan II (AD)R 2.0 TSI 4motion235kW / 320hp1984cm³DNFG (from 11.20)

The splitter is painted black and is wide enough to fit. The splitter visually lowers the front bumper by 3-5 cm (depending on the model) and improves the aerodynamics of the vehicle. The product is made of ABS plastic - this is characterized by increased strength and flexibility. With material certificate. Contents:Cup spoiler lip front attachmentFitting kitFitting instructionsFlapsFastening screws for flaps (silver)You have to mount the flaps on the splitter yourself. SPECIAL PRICE - STOCK SALE - Product may have minor defects (e.g. small scratches)

Facts: Performance increase (standard Golf R): 10-13hp, 12-15Nm Performance increase (tuned Golf R): 15-20hp, 25-30Nm Material: Carbon fibre Manufacturer: Eventuri Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) The MK8 Golf GTi/R intake manifold is a complete revision of the standard intake manifold up to the turbo inlet. Taking inspiration from our RS3 intake, we have maximised the space available to create an intake that is suitable for all power levels, from standard specification through to high performance systems with hybrid or full frame turbos. This intake system has been developed to provide the highest possible flow rate whilst achieving the lowest possible intake temperatures. Each component has been designed to give the turbo a smooth and clear flow path. The restrictive standard intake pipe with a diameter of 73 mm is replaced by an intake pipe with a larger diameter of 94 mm. The filter itself has an outer diameter of 192mm or 7.5? with a filter area of over 110,000mm^2. The patented Venturi housing is designed to provide the largest possible internal volume for the available space in the Golf engine bay and provides laminar flow to the turbo pipe. Finally, the duct seals the filter opening at the windscreen, but is not restricted by the standard intake alone. We have raised the front of the duct to now create an additional opening behind the bonnet, equivalent to an extra 7? diameter hole for the inlet to draw from. The resulting system can significantly outflow the stock airbox while keeping intake temperatures to a minimum with the sealed design. Dyno testing Our MK8 Golf intake has been independently tested by a renowned tuner in the UK, Regal Autosport. A MK8 Golf R was tested in original condition and with a tuning box. The tests were carried out on the same day, with the standard airbox being tested first and then the Eventuri. No other changes were made to the car. The first graph shows the results with a stock map. As can be seen, there is a measurable gain across the rev range of up to 12bhp. This gain is noticeable even in a standard vehicle on the road due to better throttle response and faster acceleration. The second diagram shows the results when using a tuning box that increases the flow requirement of the intake system. The tuning box was used for both the standard airbox and the Eventuri intake, with no changes made between tests. With a higher flow requirement, the stock airbox places a greater restriction on the turbo, which is evident by the significant increase achieved with the Eventuri fitted. We now have a power increase of up to 20 hp and 30 Nm across the entire rev range, which is even more noticeable on the road. We expect the gains to be even greater with higher tuning levels. The improvements are due to a combination of reasons: 1) The closed system keeps IAT levels low - the Golf's engine bay can heat up very quickly, so an open cone filter leads to an increase in IAT levels and therefore a loss of power. 2) The Venturi housing provides a smooth transition from the filter to the intake pipes, both of which are matched to an internal diameter of 94mm. This contributes to a more efficient operation of the turbo. 3) The entire system is made from pure pre-impregnated carbon fibre, which provides excellent insulation against heat and has smooth internal surfaces, unlike glass fibre, which has sharp resin lines. Parts certificate The manufacturer's specifications apply to installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT Audi S3 (8Y) e1*2007/46*2060*.. DE/AT Audi TTS (FV/FVP/8S e1*2001/116*0369*.. DE/AT Cupra Ateca LCI e9*2007/46*6394*.. DE/AT Cupra Formentor e9*2007/46*4008*.. DE/AT Cupra Leon e9*2007/46*3167*.. DE/AT Skoda Octavia RS e8*2007/46*0355*.. DE/AT Skoda Superb e8*2007/46*0317*.. DE/AT Volkswagen Arteon R e1*2007/46*1725*.. DE/AT Volkswagen Golf 8 GTI e1*2007/46*2014*.. DE/AT Volkswagen Golf 8 GTI CS e1*2007/46*2014*.. DE/AT Volkswagen Golf 8R e1*2007/46*2014*.. DE/AT Volkswagen Tiguan R e1*2001/116*0450*.. DE/AT Volkswagen Tiguan R (AD1) e1*2007/46*0487*.. Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine type Audi Q3 (F3)45 TFSI quattro180kW / 245hp1984cm³DNPA Cupra Formentor (KM)2.0 TSI180kW / 245hp1984cm³DNPA Cupra Leon (KL)2.0 TSI180kW / 245hp1984cm³DNPA Seat Tarraco (KN)2.0 TFSI 4Drive180kW / 245hp1984cm³DNPA Skoda Octavia IV (NX)RS 2.0 TFSI180kW / 245hp1984cm³DNPA Skoda KodiaqRS 2.0 TSI 4x4180kW / 245hp1984cm³DNPA VW Golf 8GTI 2.0 TSI180kW / 245hp1984cm³DNPA VW Tiguan II (AD)2.0 TSI 4motion180kW / 245hp1984cm³DNPA

KW coilover suspension DDC “Plug & Play” The “Plug & Play” solution for vehicles that have a standard electronic damper adjustment. KW also offers you the possibility to combine the active standard damper control of your sporty vehicle with the stainless steel KW DDC Plug & Play coilover suspension. In this way, you can continue to use the existing active damper control in your car such as VW Scirocco, VW Golf VI, VW Passat, BMW and other models in conjunction with a stepless lowering. The best thing about it: Apart from replacing the adaptive standard suspension with the KW DDC Plug & Play coilover suspension, no further conversion steps or even modifications to the on-board electronics are necessary. The adaptive KW dampers are simply connected to the original connectors of your car manufacturer via the KW DDC plug connection. The standard control unit then takes over the regulation and control of the KW DDC Plug & Play coilover suspension. Perfect symbiosis of an OEM control unit with the advantages of an adaptive KW coilover suspension Our suspension technology is compatible with the electronics of various car manufacturers. This means that the adaptive KW DDC Plug & Play coilover suspension is immediately recognized by the on-board electronics. All displays and controls of your standard vehicle remain fully functional and combine the advantages of an adaptive damping system with the stylish and sporty lowering of a high-quality KW coilover suspension. Due to the exclusive use of rust-free stainless steel and durable components, the functionality of the rust-free KW coilovers is maintained under all weather conditions. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, adjustment is also possible after a snowy winter, for example. No oxidation occurred on the KW threaded spring legs during a salt spray test. This means that the adjustment of the stepless lowering is not affected even after years. - the plug & play solution for sportiness or more ride comfort at the touch of a button with outstanding looks thanks to stepless lowering - Compatible with the standard suspension control unit - Vehicle-specific damper setups such as Comfort / Normal / Sport - Operation via series buttons in the interior Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) - Only for vehicles with electronic damper control Technical information: Lowering VA/HA (mm): 25-50/25-50 Level change (mm) between: VA and / HA and Version: DDC - Plug & Play Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A3 Sedan (GY) 8YS 04/2020- 40 TDI quattro notchback diesel 147 KW 1968 ccm 4 all-wheel drive AUDI A3 Sedan (GY) 8YS 04/2020- 40 TFSI quattro notchback petrol 140 KW 1984 ccm 4 all-wheel drive AUDI A3 Sedan (GY) 8YS 04/2020- S3 quattro notchback petrol 228 KW 1984 ccm 4 all-wheel drive AUDI A3 Sedan (GY) 8YS 04/2020-     S3 quattro notchback petrol 245 KW 1984 ccm 4 all-wheel drive AUDI A3 Sportback (GY) 8YA 11/2019- 40 TDI quattro hatchback diesel 147 KW 1968 ccm 4 all-wheel drive AUDI A3 Sportback (GY) 8YA 11/2019-     40 TFSI quattro Hatchback Petrol 140 KW 1984 ccm 4 All-wheel drive AUDI A3 Sportback (GY) 8YA 11/2019- S3 quattro Hatchback Petrol 228 KW 1984 ccm 4 All-wheel drive AUDI A3 Sportback (GY) 8YA 11/2019- S3 quattro Hatchback Petrol 245 KW 1984 ccm 4 All-wheel drive CUPRA LEON Sportstourer 10/2020- 2.0 TSI 4Drive Estate Petrol 228 KW 1984 ccm 4 All-wheel drive SKODA OCTAVIA IV (NX3) 01/2020- 2.0 RS Hatchback Petrol 195 KW 1984 ccm 4 Front-wheel drive SKODA OCTAVIA IV (NX3) 01/2020- 2. 0 TDI Hatchback Diesel 147 KW 1968 ccm 4 Front-wheel drive SKODA OCTAVIA IV (NX3) 01/2020- 2.0 TSI RS Hatchback Petrol 180 KW 1984 ccm 4 Front-wheel drive SKODA OCTAVIA IV Combi (NX5) 11/2019- 2. 0 RS Estate Petrol 195 KW 1984 ccm 4 Front-wheel drive SKODA OCTAVIA IV Combi (NX5) 11/2019- 2.0 TDI Estate Diesel 147 KW 1968 ccm 4 Front-wheel drive SKODA OCTAVIA IV Combi (NX5) 11/2019- 2. 0 TSI RS Combi Petrol 180 KW 1984 ccm 4 front-wheel drive VW GOLF VIII (CD1) 07/2019- 1.4 GTE Hatchback Petrol/Electric 110 KW 1395 ccm 4 front-wheel drive VW GOLF VIII (CD1) 07/2019- 1.4 GTE PLUG-IN HYBRID Hatchback Petrol/Electric 132 KW 1395 ccm 4 front-wheel drive

KW V3 coilover suspension Unlimited individuality for performance & comfort. Separate damper force adjustment for rebound and compression damping.As with every KW coilover suspension, our suspension engineers also develop a sporty and harmonious basic set-up for the vehicle-specific applications of the KW V3. In addition to tests on our KW 7-post driving dynamics test bench, we also carry out extensive test drives on country roads, the motorway and even on the Nürburgring Nordschleife, kilometre by kilometre, to guarantee you the perfect suspension set-up. For years, the KW V3, one of the world's top aftermarket products, has been the reference for coilover suspensions. With its damper characteristics, high-quality workmanship and outstanding durability, it has impressed discerning sports car drivers, tuners, large and small series manufacturers such as Alpina, MTM, Manthey, Oettinger and many other well-known companies in the international automotive industry. Cutting-edge technology from motorsportYou get much more than a sporty lowering and excellent handling on all roads with the KW V3. It is based on our many years of experience as a suspension manufacturer and supplier in international motorsport, such as in the ADAC GT Masters touring car series, FIA GT1, FIA GT3, International GT Open, WTC, VLN and also in the legendary ADAC Zurich 24h Race Nürburgring.Similar to our racing coilovers from the KW Competition programme, the rebound and compression damping of the KW V3 can be adjusted independently of each other. This individual tuning option is appreciated by tuners, sports car manufacturers, tuners and demanding drivers worldwide. The perfect suspension setup for significantly more driving dynamicsIf you have already carried out initial performance modifications to your sporty road vehicle, it is easy to incorporate these into the damper set-up in a targeted manner with the KW V3. The patented KW valve technology for the separate adjustment of the rebound and compression damping allows you to customise the vehicle-specific basic set-up from KW. For example, the KW bottom valve, which can be adjusted in twelve clicks in the low-speed range of the compression damping, gives you the freedom to even take the tyre characteristics of your high and ultra-high performance road tyres into account in the suspension set-up.Thanks to the patented compression adjustment at the lower piston end of the stainless steel housing, you don't even need any tools. The adjustable compression adjustment with its twelve precise clicks allows you to influence body roll and body roll movements by hand without having to change the rebound damping to match the spring rate.With the individually adjustable rebound damping of the KW V3, you can directly influence the handling and comfort through the exact click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery.By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car tracks more accurately and you have even more stability at higher cornering speeds. If, for example, you change from the approved wheel/tyre combinations of your car manufacturer to larger rims, you can use the KW V3 to perfectly match the handling of your car and your new alloy wheels. High-quality, customised and durableThe KW V3 is subjected to extensive quality tests during production and every single damper is checked. This is the only way we can fulfil our claim to provide a warranty of up to five years when a KW coilover suspension V3 is installed by a KW specialist dealer. Due to the filigree workmanship and the use of high-quality components, the KW coilover struts made of stainless steel, for example, are 100 per cent rust-free and have an unlimited service life.This means that the functionality of the stepless lowering system via the dirt-resistant KW trapezoidal thread and the KW polyamide threaded ring is not impaired even after many years. Thanks to the individual lowering with its stepless adjustment range, you can also emphasise the sportiness of your vehicle visually. A feature that is very popular in the performance-orientated tuning scene. - Freely adjustable damping technology in rebound and compression damping- inox-line stainless steel technology- Individual, stepless lowering- Tested adjustment range- high-quality components for a long service life- adjustable rebound damping with 16 exact clicks- 12-way adjustable compression damping with click adjustment- Unique, independently acting damping force adjustment Setup: The individually adjustable rebound & compression damping of the KW V3The KW V3 is the ideal accessory for performance-orientated drivers and tuning enthusiasts who demand a high level of sportiness from their vehicles. The dampers, which are separately adjustable in rebound and compression, allow extensive damper tuning with their sophisticated click adjustment. This makes it easy to directly influence the turn-in behaviour, directional stability, tyre grip and handling characteristics for safe controllability at the limit. Please note the conditions and instructions for this product:- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper)- For vehicles with electronic damper control, this must be deactivated.- Only for vehicles with a clamping diameter on the VA of 55mm- The dampers have easy-to-operate adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible. Technical information:Lowering VA/HA (mm): 25-50/25-50Level change (mm) between: VA and / HA andVersion: V3Hardness adjustment: Rebound and compressionMaterial: Stainless steelAdjustment VA/HA: thread/threadStrut clamping diameter VA (mm): 55Approval: Parts certificate (§19.3) Compatible vehicles:Manufacturer Model Version Body Fuel Performance Displacement Cylinder DriveAUDI A3 Sedan (GY) 8YS 04/2020- 40 TDI quattro notchback diesel 147 KW 1968 ccm 4 all-wheel driveAUDI A3 Sedan (GY) 8YS 04/2020- 40 TFSI quattro notchback petrol 140 KW 1984 ccm 4 all-wheel driveAUDI A3 Sedan (GY) 8YS 04/2020- S3 quattro notchback petrol 228 KW 1984 ccm 4 all-wheel driveAUDI A3 Sedan (GY) 8YS 04/2020- S3 quattro notchback petrol 245 KW 1984 ccm 4 all-wheel driveAUDI A3 Sportback (GY) 8YA 11/2019- 40 TDI quattro hatchback diesel 147 KW 1968 ccm 4 all-wheel driveAUDI A3 Sportback (GY) 8YA 11/2019- 40 TFSI quattro hatchback petrol 140 KW 1984 ccm 4 all-wheel driveAUDI A3 Sportback (GY) 8YA 11/2019- S3 quattro hatchback petrol 228 KW 1984 ccm 4 all-wheel driveAUDI A3 Sportback (GY) 8YA 11/2019- S3 quattro hatchback petrol 245 KW 1984 ccm 4 all-wheel driveSKODA OCTAVIA IV (NX3) 01/2020- 2.0 RS hatchback petrol 195 KW 1984 cc 4 front-wheel driveSKODA OCTAVIA IV (NX3) 01/2020- 2.0 TDI Hatchback Diesel 147 KW 1968 ccm 4 Front-wheel driveSKODA OCTAVIA IV (NX3) 01/2020- 2.0 TSI RS Hatchback Petrol 180 KW 1984 ccm 4 Front-wheel driveSKODA OCTAVIA IV Combi (NX5) 11/2019- 2.0 RS Combi Petrol 195 KW 1984 ccm 4 Front-wheel driveSKODA OCTAVIA IV Combi (NX5) 11/2019- 2.0 TDI Estate Diesel 147 KW 1968 ccm 4 front-wheel driveSKODA OCTAVIA IV Combi (NX5) 11/2019- 2.0 TSI RS Estate Petrol 180 KW 1984 ccm 4 Front-wheel driveVW GOLF VIII (CD1) 07/2019- 1.4 GTE Hatchback petrol/electric 110 KW 1395 ccm 4 front-wheel driveVW GOLF VIII (CD1) 07/2019- 1.4 GTE PLUG-IN HYBRID Hatchback Petrol/Electric 132 KW 1395 ccm 4 Front-wheel drive

The certificate includes the increase in rated power to 227-326kW/309-443PS (depending on the vehicle and hardware installed).Note: The purchase of the performance upgrade does not include registration in the vehicle documents. This must be purchased separately.To get the maximum performance from your vehicle, we recommend filling up with premium fuel (100/102 octane) before and after the optimisation. The following hardware components may also be installed individually or in combination for all listed vehicles as part of our combination certificate: - HJS downpipe- Wagner Tuning intercooler- Wagner Tuning intake system- Wagner Tuning pressure pipes- Aulitzky exhaust systemIn combination with all the hardware, a legal stationary noise increase to 102dB is possible. Compatible vehicles:VehicleTypePower outputEngine capacityEngineNew rated powerNote Audi A3 (8YA/8YS)S3 quattro228kW / 310PS1984cm³DNFB1) 281kW (382PS)2) 326kW (443PS)optionally in conjunction with the standard or Aulitzky exhaust system Audi Q3 (F3B/F3N)45 TFSI quattro180kW / 245PS1984cm³DNPA1) 227kW (309PS)2) 253kW (344PS)only in conjunction with the standard exhaust system Audi TT (FV3/FV9)45 TFSI / quattro180kW / 245PS1984cm³DNPA1) 227kW (309PS)2) 253kW (344PS)optionally in conjunction with the standard or Aulitzky exhaust system Audi TT (FV3/FV9)TTS quattro235kW / 320PS1984cm³DNFG1) 281kW (382PS)2) 326kW (443PS)optionally in conjunction with the standard or Aulitzky exhaust system Cupra Ateca (KH)2.0 TSI 4Drive221kW / 300PS1984cm³DNFC1) 281kW (382PS)2) 326kW (443PS)only in conjunction with the standard exhaust system Cupra Leon (KL1/KL8)2.0 TSI180kW / 245PS1984cm³DNPA1) 227kW (309PS)2) 253kW (344PS)optionally in conjunction with the standard or Aulitzky exhaust system Cupra Leon (KL1/KL8)2.0 TSI / 4Drive221kW / 300PS228kW / 310PS1984cm³DNFB, DNFC1) 281kW (382PS)2) 326kW (443PS)optionally in conjunction with the standard or Aulitzky exhaust system Skoda Octavia IV (NX5)RS 2.0 TSI180kW / 245PS1984cm³DNPA1) 227kW (309PS)2) 253kW (344PS)only in conjunction with the standard exhaust system VW Golf VIII (CD1)GTI 2.0 TSI180kW / 245PS1984cm³DNPA1) 227kW (309PS)2) 253kW (344PS)optionally in conjunction with the standard or Aulitzky exhaust system VW Golf VIII (CD1)GTI CS/ED45 2.0 TSI221kW / 300PS1984cm³DNFC1) 281kW (382PS)2) 326kW (443PS)optionally in conjunction with the standard or Aulitzky exhaust system VW Golf VIII (CD1/CDV)R 2.0 TSI 4motion235kW / 320PS245kW / 333PS1984cm³DNFF, DNFG1) 281kW (382PS)2) 326kW (443PS)optionally in conjunction with the standard or Aulitzky exhaust system VW Tiguan (AD1)2.0 TSI180kW / 245PS1984cm³DNPA1) 227kW (309PS)2) 253kW (344PS)only in conjunction with the standard exhaust system VW Tiguan (AD1)R 2.0 TSI 4motion235kW / 320PS1984cm³DNFG1) 281kW (382PS)2) 326kW (443PS)only in conjunction with the standard exhaust system VW T-Roc (A1)R 2.0 TSI 4motion221kW / 300PS1984cm³DNFC1) 281kW (382PS)2) 326kW (443PS)only in conjunction with the standard exhaust system 1) with Wagner Turbo Outlet2) with Wagner Turbo Outlet + HJS downpipe

Suitable for the following vehicles:Audi TT 8S 45 TFSI 2.0 TSI (EA888 Gen.4 DNP) 180kW / 245hpVW Golf VIII Type CD2.0 GTI (EA888 Gen.4 DNP) 180kW / 245hpVW Tiguan AD (FL) 2.0 TSI (EA888 Gen.4 DNP) 180kW / 245hpSkoda Octavia NX 2.0 TSI RS (EA888 Gen.4 DNP) 180kW / 245hpSkoda Kodiaq 2.0 TSI RS (EA888 Gen.4 DNP) 180kW / 245hpCupra Leon KL 2.0 TSI (EA888 Gen.4 DNP) 180kW / 245hpCupra Formentor VZ 2.0 TSI (EA888 Gen.4 DNP) 180kW / 245hp The Wagner Tuning Turbo Outlet has been specially developed for vehicles with the EA888 Gen.4 engine and Garrett turbocharger to optimise performance and response. With an innovative design and high-quality materials, this turbo outlet offers a plug-and-play solution for a wide range of vehicle models, including Audi, VW, Skoda and Seat. The Wagner Tuning Turbo Outlet is the ideal choice for discerning vehicle enthusiasts who want to get maximum power and performance from their vehicles.Optimised air mass flow: The Turbo Outlet has been developed using CFD flow simulations to maximise air mass flow and increase performance. Plug-and-play installation: Easy installation thanks to the plug-and-play design that allows direct replacement of the standard part. Reduction of turbulence: By increasing the internal diameter to Ø48mm, turbulence is minimised, resulting in improved airflow and optimised responsiveness. High-quality materials: CNC-machined from high-strength aluminium alloy and anodised black for durability and aesthetics.Made in Germany: Manufactured in Germany to the highest quality standards. Scope of delivery:1 x Turbo outlet (exhaust nozzle) With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).