Diffusor Carbon | fits BMW X5M (F85) 575hp S63 | 3DDesign

Actuator for exhaust flap OEM part number: 18307851568 (18 30 7 851 568) Suitable for the following BMW models with exhaust flap: F80 F82 F83 F85 F86 F87N F90 F91 F92 F93 F95 F96 F97 F98 G01 G02 G05 G06 G14 G15 G16 G20 G21 G22 G23 G26 G30 G42 G82 G83

Facts: - Tailpipes: 4x90mm black - electric flaps - Made in Germany (Lake Constance) - with/without ECE approval (depending on choice of flap control)* Scope of delivery: - 1x Aulitzky Exhaust rear silencer - 4x tailpipes 90mm black - ECE handout Compatible vehicles: VehicleVehicle typePowerEngine capacityEngineYear of constructionBMW X5 (F85)M423kW / 575hp4395cm³S63 B44 B12.14 - 07.18BMW X6 (F86)M423kW / 575hp4395cm³S63 B44 B12.14 - 07.19 *ATTENTION! In conjunction with the standard or ECE flap control system (with type approval), this flap rear silencer has ECE approval so that it can be used legally within the scope of the StVZO without registration in the vehicle documents.The use of flap rear silencers in conjunction with the race flap control (without approval) is not permitted for use on public roads and is only intended for racing purposes! If you nevertheless install a product without approval in your vehicle and use it within the scope of the StVZO, you are liable to prosecution. Possible consequences that you can expect in this case: Expiry of the operating licence in accordance with §19 of the StVZO and possible resulting immobilisation of the vehicle. Other possible consequences, such as a charge of tax evasion, as well as possible investigations by the environmental authorities are at the discretion of the investigators.

The 3DDesign carbon diffuser for the F85 gives the rear of the vehicle a completely new look. The diffuser is made of carbon fiber and is simply replaced with the original rear apron. Incl. parts certificate Compatible vehicles:BMW X5 (F15, F85) M 2014-2018

The 3DDesign carbon front lip for the F85 gives the front of the mighty vehicle an even sportier look. Perfect fit, fierce looks, individuality in the blink of an eye - what more could you want? Incl. parts certificate Compatible vehicles:BMW X5 (F15, F85) M 2014-2018

The certificate includes the increase in rated power to 515kW (700hp).Note: Price errors/errors/changes reserved! Some vehicles require an additional OBD unlock. We will be happy to check this in advance using the chassis number.The purchase of the performance upgrade does not include registration in the vehicle documents. This must be purchased separately.To get the maximum performance from your vehicle, we recommend filling up with premium fuel (100/102 octane) before and after the optimisation.Compatible vehicles:VehicleTypePower outputEngine capacityEngineYear of construction BMW 5 Series (F10)M5412kW / 560hp4395ccS63 B44 B09.11 - 10.16 BMW 6 Series (F06/F12/F13)M6412kW / 560hp4395ccS63 B44 B03.12 - 10.18 BMW X5 (F85)M423kW / 575hp4395ccS63 B44 B12.14 - 07.18 BMW X6 (F86)M423kW / 575hp4395ccS63 B44 B12.14 - 07.19

The 3DDesign carbon side skirts for the F85 provide an ideal visual connection between the front lip and diffuser. The sills are supplied as a set, are made from genuine carbon fiber and can be fitted in next to no time. Incl. parts certificate Compatible vehicles:BMW X5 (F15, F85) M 2014-2018

The AULITZKY app “do it yourself” Get your app now to tune your car yourself or manage a selection of your finished maps, which have been individually tuned by us on the test bench, and flash them to your vehicle in no time at all. In addition to flashing your engine control unit, we also offer transmission programming. It is also possible to fully read and delete the fault memory. Your benefits at a glance:-software for ECU (engine control unit)-Software for TCU (transmission control unit)-Read fault memory-Delete fault memory-Datalogging-Tuning for Stage 1 & Stage 2 included-Custom maps possible-Stage 3 available on site for an additional charge Attention: From certain model years and variants, an OBD unlock or ECU unlock is required to ensure that your vehicle can be flashed via OBD.The OBD unlock can be carried out by sending the ECU to us or by our support partners at various locations in Germany. For the ECU unlock we need the vehicle in our workshop for approx. 1.5 - 2 weeks. -Stage 1: Pipercross air filter-Stage 2: additional downpipe, charge pipe-Stage 3: additional upgrade turbocharger, Dorch high-pressure pump, turbocharger inlet, exhaust system Note: Registration of the performance upgrade is not part of this order and must be requested separately by e-mail.Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction BMW 5er (F07)550i / xDrive 330kW / 449hp4395cm³N63 B44 A, N63 B44 B07.12 - 02.17 BMW 5er (F10)M5 412kW / 560hp4395cm³S63 B44 B09.11 - 10.16 BMW 5er (F10)M5 Competition423kW / 575hp4395cm³S63 B44 B02.13 - 10.16 BMW 5er (F10)M5 30th Anniversary441kW / 600hp4395cm³S63 B44 B07.14 - 10.16 BMW 6er (F13)650i / xDrive 330kW / 449hp4395cm³N63 B44 B07.12 - 10.17 BMW 6er (F13)M6412kW / 560hp4395cm³S63 B44 B07.12 - 10.17 BMW 6er (F13)M6 Competition423kW / 575hp441kW / 600hp4395cm³S63 B44 B07.13 - 02.1503.15 - 10.17 BMW X5 (F15/F85)50i xDrive330kW / 449hp4395cm³N63 B44 B08.13 - 07.18 BMW X5 (F85)M423kW / 575hp4395cm³S63 B44 B12.14 - 07.18 BMW X6 (F16/F86)50i xDrive330kW / 449hp4395cm³N63 B44 B08.14 - 07.19 BMW X6 (F86)M423kW / 575hp4395cm³S63 B44 B12.14 - 07.19

Your 5 Series is missing a data display! We present the data display for the E39 here. Access to all data from the engine control unit:So ALL. The sensors are queried directly via CanBus and are displayed on our tried and tested MFD28. The display comes with a vehicle-specific panel and fits into the interior like an original part. The ventilation remains intact through the slots. The sensors are interrogated by the CanBus via the manufacturer-specific protocol. We have optimised the protocol to achieve maximum polling speed. Details:- Integrates perfectly into the vehicle interior- Up to 128 sensors can be interrogated- 10 individually configurable views with our DSS - Display Setup Software- ready-made views for a quick start with our display- simply plug and play via our cable set - plug in, done- 4 additional analogue inputs for exhaust gas temperature, oil pressure and more- Best readability - optional anti-reflective film included- Query the sensors like manufacturer diagnostic tools Performance metre:Measure your acceleration times in our performance widget - 0-100, 100-200, 0-200 Data jogging:Log all data to the internal SD card. Whether "on-demand" (start with a tap) or permanently. All data from your last turn is saved. Preset alarms:Preset alerts can be easily activated and customised. For example, receive a large warning message if the exhaust gas temperature is above 900 degrees. 4 additional analogue inputs:Additional temperature and/or pressure sensors can be connected for further monitoring options. e.g. exhaust gas temperature or exhaust gas back pressure. An ethanol sensor can be connected to one of the digital inputs. Read out/delete errors:Read out errors from the engine control unit in plain text and also delete them Customised designWhether it's the customised start screen or the selection from a variety of different widgets. Make the display your display! Access to all data from the engine control unit:We supply your display with a ready-made TRI file as standard. All sensors that are queried are defined here. Temperatures:Engine water temperature, intake temperature, exhaust temperature, transmission temperature Pressures:Boost pressure, ambient pressure, oil pressure Lambda/mixture:Lambda value target/actual, short-term lambda adjustment, long-term lambda adjustment, MAF, engine load, torque Driver dynamics:Brake pressure, vehicle speed, throttle angle/gas pedal position Other:Engine speed, total ignition angle, gear, battery voltage, ignition angle reduction per cylinder Analogue inputs:Additional sensors can be added here: Oil temperature, petrol pressure, oil pressure, exhaust gas temperature, etc. but also an ethanol sensor (Flex Fuel) If values are missing, they can easily be added. ATTENTION: not every engine offers all values! For which engines and models is the display:The display panel fits all E39 vehicles with M62 or S62 engines (LHD or RHD).MFD28 Technical data:- Dimensions: 70.3 x 52mm - Hardware: 2.8" TFT screen, touchscreen, MicroSD, MicroUSB- High-quality milled aluminium front frame- Symmetrical display - ideal for rotating it by 90°- Views completely freely configurable on the PC with our DSS - Display Setup Software- Up to 64 widgets per display- 64 sensors (Can Bus + internal)- 10 views- 4x analogue inputs- Optional external switching flash- Can bus switching- Can Bus protocols: UDS, KWP2000, OBD Supported values:Many KViele customers always ask: "Which values can I query from my control unit". The answer: "ALL". Our MFD28 is compatible with ISO 11898-2 and SAE J2284.The control unit manufacturers themselves determine which values are sent via the CAN bus interface. The documentation is important here - possibly even in the form of a DBC file that can be imported directly. You can also access our extensive list of already implemented control units. This can be found in the download area. A total of up to 50 sensors can be queried if the manufacturer supports this.Broadcast data as well as OBD2 queries via Can Bus (11bit/29bit) are implemented. Special protocols such as TP2.0 from VW/Audi and UDS are also available. DSS - Display Setup Software:With our DSS - Display Setup Software, the display can be conveniently configured on the PC. The Can Bus protocol can be customised, you can import DBC files and design the displays with your own widgets.The log viewer downloads log files from the display. These can then be viewed and values can be individually selected and scaled.An in-built Can Bus logger allows you to take a close look at the log. This can be used to reverse-engineer unknown Can Buses.

The report includes the increase in rated power to 300kW (408hp).Note: Price errors/errors/changes reserved! Some vehicles require an additional OBD unlock. We will be happy to check this in advance using the chassis number.The purchase of the performance upgrade does not include registration in the vehicle documents. This must be purchased separately.To get the maximum performance from your vehicle, we recommend filling up with premium fuel (100/102 octane) before and after the optimisation.Compatible vehicles:VehicleTypePower outputEngine capacityEngineYear of construction BMW 2 Series (F87)M2272kW / 370hp2979ccN55 B30 A11.15 - 06.18

Facts:- Plug & Play installation using illustrated installation instructions- Special wiring harness for your vehicle- High-quality electronics “Made In Germany”- Electronic components with product qualification for motor vehicles according to AEC-Q100 installed- Support from us as co-developer and manufacturer Scope of delivery:The scope of delivery includes the motorsport add-on module, an engine-specific wiring harness, illustrated installation instructions in DE/EN and a BYPASS connector, which you can use to restore your vehicle to series production. Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeYear of constructionBMW 8er (F91/F92/F93)M8 441kW / 600hp4395cm³S63 B44 B07.19 - BMW 8er (F91/F92/F93)M8 Competition460kW / 625hp4395cm³S63 B44 B07.19 - LEGAL INFORMATION: THE INSTALLATION OF ADDITIONAL ELECTRONICS IS A STRUCTURAL MODIFICATION TO THE MANUFACTURER'S ELECTRONICS. WITHOUT REGISTRATION IN THE VEHICLE DOCUMENTS BY MEANS OF AN INDIVIDUAL CERTIFICATE FROM TÜV; DEKRA OR OTHER RECOGNIZED TESTING INSTITUTES, THE INSTALLATION WILL INVALIDATE THE OPERATING LICENSE. IF USED ON PUBLIC ROADS, THIS WILL RESULT IN THE LOSS OF INSURANCE COVER. WE DO NOT CURRENTLY HAVE A PARTS CERTIFICATE FOR YOUR VEHICLE. THEREFORE, THIS SYSTEM IS EXCLUSIVELY SUITABLE FOR MOTORSPORT. ATTENTION: IF YOU USE THE ADDITIONAL ELECTRONICS, YOU MAY LOSE YOUR WARRANTY CLAIMS AGAINST THE SELLER OR WARRANTY CLAIMS AGAINST THE MANUFACTURER. IF YOU HAVE ANY FURTHER QUESTIONS, PLEASE DO NOT HESITATE TO CONTACT US!

Facts:- Plug & Play installation using illustrated installation instructions- Special wiring harness for your vehicle- High-quality electronics “Made In Germany”- Electronic components with product qualification for motor vehicles according to AEC-Q100 installed- Support from us as co-developer and manufacturer Scope of delivery:The scope of delivery includes the motorsport add-on module, an engine-specific wiring harness, illustrated installation instructions in DE/EN and a BYPASS connector, which you can use to restore your vehicle to series production. Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeYear of constructionBMW Z4 (G29)M40i OPF250kW / 340hp2998cm³B58 B30 C11.18 - LEGAL INFORMATION: THE INSTALLATION OF ADDITIONAL ELECTRONICS IS A STRUCTURAL MODIFICATION TO THE MANUFACTURER'S ELECTRONICS. WITHOUT REGISTRATION IN THE VEHICLE DOCUMENTS BY MEANS OF AN INDIVIDUAL CERTIFICATE FROM TÜV; DEKRA OR OTHER RECOGNIZED TESTING INSTITUTES, THE INSTALLATION WILL INVALIDATE THE OPERATING LICENSE. IF USED ON PUBLIC ROADS, THIS WILL RESULT IN THE LOSS OF INSURANCE COVER. WE DO NOT CURRENTLY HAVE A PARTS CERTIFICATE FOR YOUR VEHICLE. THEREFORE, THIS SYSTEM IS EXCLUSIVELY SUITABLE FOR MOTORSPORT. ATTENTION: IF YOU USE THE ADDITIONAL ELECTRONICS, YOU MAY LOSE YOUR WARRANTY CLAIMS AGAINST THE SELLER OR WARRANTY CLAIMS AGAINST THE MANUFACTURER. IF YOU HAVE ANY FURTHER QUESTIONS, PLEASE DO NOT HESITATE TO CONTACT US!

The Competition intercooler kit fits the following vehicles:Ford Focus MK3 ST250 2,0L 184KW/250hp (2012+) Unleash the true power of your Ford Focus MK3 with our Competition high performance intercooler kit! Your Ford Focus MK3 deserves the best, and our Competition High Performance Intercooler Kit will ensure you get just that. Here's what you can expect: With mesh dimensions of 640mm x 200mm x 110mm, our intercooler offers an impressive 24% larger flow area compared to the factory radiator. This means your engine gets more air, resulting in a noticeable increase in power.Our kit offers an astonishing 60% more charge air volume than the stock radiator. This leads to improved combustion and ultimately more power and efficiency. Despite its impressive size, our intercooler weighs only 10.5 kg. The radiator's end boxes are made of cast aluminium and have been optimized for the best possible internal airflow using CAD designs. This guarantees optimal airflow and minimizes back pressure. Our competition high performance mesh is specially developed to provide excellent cooling characteristics. All our intercoolers have an anti-corrosion coating with excellent heat conduction properties to ensure long-lasting and optimal cooling. Installation is carried out by replacing the OEM intercooler and is easy to perform. No complex adjustments required. Our kit is completely ready to install and allows for a smooth plug-and-play experience. If you're out on the track or simply want to get the maximum performance out of your Ford Focus MK3, this kit is the right choice. We subject all our products to rigorous quality control to ensure they meet the highest standards. Don't miss the chance to take the performance of your Ford Focus MK3 to a new level. Visit our website for more information and to order your kit. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 24% larger inflow area- 60% more charge air volume- flow-optimized- minimized back pressure- Plug & Play Scope of delivery:1 intercooler1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.

The Wagner Tuning Competition intercooler kit EVO 2 fits the following vehicles:Volkswagen T5.1 2,5TDI 96KW/131hp 2003-2009*Volkswagen T5.1 2,5TDI 128KW/174hp 2003-2009** Vehicles with MKB: AXB, AXC, AXD, AXE, BLJ, BRR, BRS require the Wagner Tuning silicone hose kit on the driver's side. Ready to take your vehicle to the next level of performance? Our Competition high performance intercooler is the solution for demanding drivers who want maximum performance and optimum cooling. With net dimensions of 670 mm x 302 mm x 75 mm (= 15,175 cm³), this intercooler offers an impressive 40% larger flow area and an incredible 229% more charge air volume compared to the standard cooler. This means that your engine receives more air, resulting in a noticeable increase in performance. The Competition high-performance mesh has been specially developed and offers outstanding cooling properties. It allows your engine to operate at the optimum temperature. Despite its impressive performance, this high-performance intercooler weighs just 8.9 kg. The free-form end boxes made of high-quality cast aluminum have been developed in the CAD system to ensure the best possible internal air flow. With integrated air baffles in the inlet, this intercooler ensures even filling to maximize performance. The original click connections have been eliminated and the connection diameters at the inlet and outlet have been increased to a generous Ø65 mm. Our kit includes two reinforced silicone hoses to ensure excellent cooling with minimal back pressure. All our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This ensures long-lasting and optimum cooling with a clear increase in performance. Installation is carried out at the original mounting points and is effortless. This intercooler is a 1:1 replacement that requires no complex modifications. Our products are subject to strict quality control procedures to ensure they meet the highest standards. Get ready to dominate the road and take your vehicle to a new level of performance. Our Competition high performance intercooler is the choice of champions. Order today and experience the power! Advantages of the Wagner Tuning intercooler:- improved cooling performance- 40% larger inflow area- 229% more charge air volume- Inlet and outlet extended to Ø65 mm- original mounting points (plug & play) OEM intercooler:Cooling surface 1440cm²charge air volume 4,6L Wagner Tuning intercooler:Cooling surface 2023cm²Charge air volume 15.2L Scope of delivery:1 intercooler2 silicone hoses1 aluminum adapter1 mounting material1 assembly instructionAttention: Not approved in the area of the StVZO.