Facts: - replaces the main catalytic converter - with 200-cell stainless steel sports catalytic converter and OPF - Euro 6 compatible - with ECE approval* Compatible vehicles: ManufacturerModelTypeEngine capacity (litres)Power (kW)Engine typeEmission standardCupraFormentorKM2.0180DNPAEuro 6d - OPFSkodaOctavia III RSNX2.0180DNPAEuro 6d - OPFVW GOLFGolf 8 GTICD2.0180DNPAEuro 6d - OPFVW GOLFGolf 8 GTI ClubsportCD2.0221DNFCEuro 6d - OPF Note: Depending on the software version, the engine control light may light up. We recommend a software adjustment in this case. *This downpipe has ECE approval so that it can be used within the scope of the German Road Traffic Licensing Regulations (StVZO) without registration in the vehicle documents.

Facts: - replaces the main catalytic converter - with/without 200 cell stainless steel sports catalytic converter and 2x OPF - Euro 6 compatible - with ECE approval* Compatible vehicles: ManufacturerModelTypeDisplacement (litres)Power (kW)Engine typeEmission standardAudiA3 40 TFSI quattroGY2.0140DNNAEuro 6d - OPFAudiS3 53 TFSI quattroGY2.0228DNFBEuro 6d - OPFAudiQ2 40 TFSI quattroGA2.0140DNNAEuro 6d - OPFAudiSQ2 quattroGA2.0221DNFCEuro 6d - OPFAudiTT 45 TFSI quattro8J2.0180DNPAEuro 6d - OPFAudiTT S quattro8J2.0235DNFDEuro 6d - OPFCupraAteca 4Drive5FP2.0140DNNAEuro 6d - OPFCupraAteca 4Drive5FP2.0221DNFCEuro 6d - OPFCupraFormentor 4DriveKM2.0140DNNAEuro 6d - OPFCupraFormentor VZ 4DriveKM2.0228DNFBEuro 6d - OPFCupraLeon IV ST 4DriveKL2.0228DNFBEuro 6d - OPFSkodaKaroq 4x4NU2.0140DNNAEuro 6d - OPFSkodaKodiaq 4x4NS2.0140DNNAEuro 6d - OPFSkodaKodiaq RS 4x4NS2.0180DNPAEuro 6d - OPFSkodaOctavia IV 4x4NX2.0140DNNAEuro 6d - OPFSkodaSuperb III 4x43Z2.0206DNFEEuro 6d - OPFVWArteon R 4motion3H2.0235DNFGEuro 6d - OPFVW GOLFGolf 8 R 4motionCD2.0235DNFGEuro 6d - OPFVWGolf 8 4motion / VariantCD2.0140DNNAEuro 6d - OPFVWPassat 4motion3C2.0206DNFEEuro 6d - OPFVWT-Roc R 4motionA12.0221DNFCEuro 6d - OPFVWT-Roc 4motionA12.0140DNNAEuro 6d - OPFVWTiguan R 4motion5N2.0235DNFGEuro 6d - OPF Note: Depending on the software version, the engine control light may light up. We recommend a software adjustment in this case. *This downpipe has ECE approval so that it can be used within the scope of the StVZO without registration in the vehicle documents.

A powerful brake is one of the most important components in motorsport. With these upgrade kits, the necessary balance of performance, weight and durability has been perfectly combined through the uncompromising selection of materials, so that this product can meet the high demands of extreme automotive applications. To achieve this, MOV'IT has increased the diameter and thickness of the brake discs and used more cross holes. Each pre-cast hole is re-drilled and countersunk to achieve a more favourable flow. The brake disc's optimised DDE ventilation system has an 80% larger surface area compared to other brake discs, resulting in a significant reduction in temperature and wear. Attention: The conversion means that only rims with at least 19 inches can be fitted!Please note that this upgrade kit for the Seat Leon Cupra is only compatible with the caliper of the performance brake system. As the original caliper is retained with this kit, it is essential that the performance caliper is already fitted. The chassis number of the vehicle on which the brakes are fitted is required to create the parts certificate. Bundle Street 1: - Upgrade kit front axle, 380mm, 2-piece disc, perforated - incl. parts certificate Bundle Street 2 (+ sports brake pads): - Upgrade kit front axle, 380mm, 2-piece disc, perforated - 4S4 Sport brake pads - incl. parts certificate Street 3 bundle (+ sports brake pads + steel flex lines): - Upgrade kit front axle, 380mm, 2-piece disc, perforated - 4S4 Sport brake pads - Steel flex lines for front and rear axle - incl. parts certificate Details:MOVIT steel brake discs, 2-piece- Highly efficient DDE cooling system- Maximum fading protection- Double, directional ventilation- Perforated for optimum response behaviour even on wet roads- Special alloy for high thermal conductivityMOVIT sports brake pads, front axle- For the original brake caliper- Optimally compatible with MOVIT brake discs- Enlarged friction surface- Even heat transfer- Longer service life- With road approval- Low noise development- Lower system temperature for the perfect friction coefficientMOVIT steel flex lines, front and rear axle- Better response behaviour of the brake system- Durable quality (does not become porous and therefore does not leak)- Brake line does not expand under pressure- Harder and more constant pressure point- Improved modulation Scope of delivery: - 2x brake disc perforated left/right incl. brake pot - 1x mounting material - 1x installation instructions and running-in instructions - 1x parts certificate - 2x sports brake pad (only bundle 2+3) - 2x steel flex lines VA + HA (only bundle 3) Compatible vehicles:Seat Leon III (5F) Cupra PP 2.0 TSI 195kW / 265PS / 1984cm³Seat Leon III (5F) Cupra PP 2.0 TSI 206kW / 280PS / 1984cm³Seat Leon III (5F) Cupra PP 2.0 TSI 213kW / 290PS / 1984cm³Seat Leon III (5F) Cupra PP 2.0 TSI 221kW / 300PS / 1984cm³Seat Leon III (5F) Cupra R PP 2.0 TSI 228kW / 310PS / 1984cm³Cupra Formentor (KM) VZ 2.0 TSI 180kW / 245PS / 1984cm³Cupra Formentor (KM) VZ 2.0 4Drive TSI 228kW / 310PS / 1984cm³Cupra Formentor (KM) 2.0 TSI 140kW / 190PS / 1984cm³Cupra Formentor (KM) 2.0 TSI 4Drive 140kW / 190PS / 1984cm³Cupra Ateca (KH) 2.0 TSI 4Drive 140kW / 190PS / 1984cm³Cupra Ateca (KH) 2.0 TSI 4Drive 221kW / 300PS / 1984cm³ Notes:When fitting the upgrade kit, we always recommend replacing the brake pads, as the use of used pads on new brake discs is not recommended.When fitted in our factory, the conversion is carried out exclusively with new brake pads!

Suitable for the following vehicles:Audi S3 8Y 2.0TFSI 228KW/310hp (from 10/2020 MKB: DNFB)Audi TT 8S 45TSI 180kW / 245hp (from 10/2020 MKB: DNPA)Audi TTS 8S 235KW/320hp (from 11/2020 MKB: DNFD)VW Golf VIII type CD2.0 GTI 180kW / 245hp (from 08/2020 MKB: DNPA)VW Golf VIII type CD2.0 GTI Clubsport 220KW/300hp (from 10/2020 MKB: DNFC)VW Golf VIII Type CD2.0 R 235KW/320hp (from 12/2020 MKB: DNFG)VW Passat B8 2.0TSI 206KW/280hp (from 11/2020 MKB:DNFE)VW Arteon (type 3H) 2.0TSI R 206-235KW / 280-320hp (from 12/2020 MKB: DNFE, DNFG)VW T-Roc R 221kW/300hp (from 10/2020 MKB: DNFC)Cupra Leon IV KL Cupra TSI 4Drive 228KW/310hp (from 02/2021 MKB: DNFB)Cupra Formentor VZ 2.0TSI 180kW / 245hp (from 03/2021 MKB: DNPA)Cupra Formentor VZ 2.0TSI 228kW / 310hp (from 11/2020 MKB: DNFB)Skoda Octavia NX 2.0 TSI RS 180kW / 245hp (from 09/2020 MKB: DNPA)Skoda Superb 3V 2.0TSI 206KW/280hp (from 11/2020 MKB:DNFE) With parts certificate! With our Wagner Tuning Competition intercooler, we offer you the perfect solution to exploit the full potential of your vehicle and experience an extraordinary driving experience. With impressive mesh dimensions of 620 mm x 440 mm x 65 mm and an external charge air volume of 17.7 liters (compared to 9 liters for OEM), this high-performance charge air cooler ensures optimum cooling of the charged air. Our newly developed competition high-performance mesh (Tube Fine) not only enables excellent cooling performance, but also ensures sufficient airflow for adjacent components such as the water cooler. The intercooler remains lightweight and weighs only 9.2 kg in total. The cast aluminium end boxes have been optimized using CAD technology and CFD simulations to achieve optimum internal airflow. An integrated air duct in the end box ensures even filling of the competition high-performance mesh. With an inlet and outlet diameter of Ø70 mm, this intercooler offers a significantly lower back pressure compared to the intercooler fitted as standard. In addition, all our charge air coolers are provided with a high-quality anti-corrosion coating, which not only ensures protection against environmental influences, but also has superior heat conduction properties. This ensures a long-lasting and optimum cooling effect with a noticeable increase in performance. Installation is carried out by simply replacing the OEM intercooler and is straightforward. You can rely on our constant quality monitoring to offer you only the highest quality products. Boost your vehicle's performance to a new level and rely on the Competition intercooler. Treat yourself to the upgrade your vehicle deserves! Important information!Our intercooler is currently only compatible with the 5Q0-121-251GN engine water cooler. We are currently working on a solution for vehicles equipped with the current 5WA121251H engine water cooler. Scope of delivery:1 intercooler2 silicone hoses4 hose clamps1 mounting material1 assembly instruction1 parts certificate With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

Your Leon/Formentor is missing a data display! Here we present the data display for the Cupra Formentor and Seat Leon or Cupra Leon. Access to all data from the engine control unit:So ALL. The sensors are queried directly via CanBus and are displayed on our tried and tested MFD28. The Cupra Formentor display comes with a vehicle-specific panel and fits into the interior like an original part. The ventilation remains intact through the slots. The sensors are queried by the CanBus via the manufacturer-specific protocol. We have optimized the protocol to achieve maximum polling speed. Details:- integrates perfectly into the vehicle interior- Up to 64 sensors can be queried- 10 individually configurable views with our DSS - Display Setup Software- ready-made views for a quick start with our display- simply plug and play via our cable set - plug in, done- 4 additional analog inputs for exhaust gas temperature, oil pressure and more- Best readability - optional anti-reflective film included- Query the sensors like manufacturer diagnostic tools Performance meter:Measure your acceleration times in our performance widget - 0-100, 100-200, 0-200 Data jogging:Log all data to the internal SD card. Whether “on-demand” (start with a tap) or permanent. All data from your last turn is saved. Preset Alarms:Preset alerts can be easily activated and also customized. For example, receive a large warning message if the exhaust gas temperature is above 900 degrees. 4 additional analog inputs:Additional temperature and/or pressure sensors can be connected for further monitoring options. e.g. exhaust gas temperature or exhaust gas back pressure. An ethanol sensor can be connected to one of the digital inputs. Read out/delete errors:Read out errors from the engine control unit in plain text and also delete them Individual designWhether it's the individual start screen or the selection from a variety of different widgets. Make the display your display! Access to all data from the engine control unit:We supply your display with a ready-made TRI file as standard. All sensors that are queried are defined here. Temperatures:Engine water temperature, intake temperature, exhaust temperature, transmission temperature Pressures:Boost pressure, ambient pressure, oil pressure Lambda/mixture:Lambda value target/actual, short-term lambda adjustment, long-term lambda adjustment, MAF, engine load, torque Driver dynamics:Brake pressure, vehicle speed, throttle angle/gas pedal position Other:RPM, total ignition angle, gear, battery voltage, ignition angle reduction per cylinder Analog inputs:Additional sensors can be added here: Oil temperature, fuel pressure, oil pressure, exhaust gas temperature, etc. but also an ethanol sensor (Flex Fuel) If values are missing, they can easily be added. ATTENTION: not every engine offers all values! For which engines and models is the Cupra Formentor display:The display panel fits all Cupra Formentor and Seat Leon 4 left-hand drive vehicles (LHD). A version for RHD (right-hand drive) is in progress. MFD28 Technical data:- Dimensions: 70.3 x 52mm - Hardware: 2.8” TFT screen, touchscreen, MicroSD, MicroUSB- High-quality milled aluminum front frame- Symmetrical display - ideal for rotating it by 90- Views completely freely configurable on the PC with our DSS - Display Setup Software- Up to 64 widgets per display- 64 sensors (Can Bus + internal)- 10 views- 4x analog inputs- Optional external switching flash- Can bus switching- Can Bus protocols: UDS, KWP2000, OBD Supported values:Many KViele customers always ask: “Which values can I query from my control unit”. The answer: “ALL”. Our MFD28 is compatible with ISO 11898-2 and SAE J2284.The control unit manufacturers themselves determine which values are sent via the CAN bus interface. The documentation is important here - possibly even in the form of a DBC file that can be imported directly. You can also access our extensive list of already implemented control units. This can be found in the download area. A total of up to 50 sensors can be queried if the manufacturer supports this.Broadcast data as well as OBD2 queries via Can Bus (11bit/29bit) are implemented. Special protocols such as TP2.0 from VW/Audi and UDS are also available. DSS - Display Setup Software:With our DSS - Display Setup Software, the display can be conveniently configured on the PC. The Can Bus protocol can be customized, you can import DBC files and design the displays with your own widgets.The log viewer downloads log files from the display. These can then be viewed and values can be individually selected and scaled.A built-in Can Bus logger makes it possible to take a close look at the log. This can be used to reverse-engineer unknown Can Buses.

Facts: Material: Carbon Manufacturer: Eventuri We are pleased to release our carbon engine cover for the VW Golf 8 platform.Compatible vehicles: VehicleTypePowerEngine capacityEngine type Audi A3 (8Y)S3 2.0 TFSI quattro228kW / 310hp1984cm³DNFB (from 09.20) Audi TT (8J1/8S)45 TFSI quattro180kW / 245hp1984cm³DNPA (from 10.20) Audi TT (8J1/8S)TTS 2.0 TFSI quattro235kW / 320hp1984cm³DNFD (from 11.20) Audi Q3 (F3)45 TFSI quattro180kW / 245hp1984cm³DNPA (from 01.21) Cupra Ateca (KH)2.0 TSI 4Drive221kW / 300hp1984cm³DNFC (from 07.20) Cupra Formentor (KM)2.0 TSI 4Drive140kW / 190hp1984cm³DNPA (from 03.21) Cupra Formentor (KM)2.0 TSI180kW / 245hp1984cm³DNPA (from 03.21) Cupra Formentor (KM)2.0 TSI 4Drive228kW / 310hp1984cm³DNFB (from 11.20) Cupra Leon (KL)2.0 TSI180kW / 245hp1984cm³DNPA (from 04.21) Cupra Leon (KL)2.0 TSI221kW / 300hp228kW / 310hp1984cm³DNFC (from 01.21)DNFB (from 06.21) Seat Tarraco (KN)2.0 TFSI 4Drive180kW / 245hp1984cm³DNPA (from 01.21) Skoda KodiaqRS 2.0 TSI 4x4180kW / 245hp1984cm³DNPA (from 06.21) Skoda Octavia IV (NX)RS 2.0 TFSI180kW / 245hp1984cm³DNPA (from 09.20) Skoda Superb III (3V)2.0 TSI 4x4206kW / 280hp1984cm³DNFE (from 11.20) VW Arteon2.0 TSI 4motionR 2.0 TSI 4motion206kW / 280hp235kW / 320hp1984cm³DNFE (from 11.20)DNFG (from 12.20) VW Golf 8GTI 2.0 TSI180kW / 245hp1984cm³DNPA (from 08.20) VW Golf 8GTI Clubsport/ED45 2.0 TSI221kW / 300hp1984cm³DNFC (from 10.20) VW Golf 8R 2.0 TSI 4motion235kW / 320hp1984cm³DNFG (from 12.20) VW Passat B8 (3G)2.0 TSI 4motion206kW / 280hp1984cm³DNFE (from 11.20) VW T-Roc (A1 Facelift)2.0 TSI 4motion221kW / 300hp1984cm³DNFC (from 11.21) VW Tiguan II (AD)2.0 TSI 4motion180kW / 245hp1984cm³DNPA (from 11.20) VW Tiguan II (AD)R 2.0 TSI 4motion235kW / 320hp1984cm³DNFG (from 11.20)

The closed APR carbon intake system increases performance by optimising the air mass flow and at the same time offers perfect filtration. Facts:- Higher power and more torque- Better throttle response- Improved engine noise- Closed carbon fibre system- All fastening elements included- Pleated filter made from cotton gauze- Directional rotating vanes for correct loading of the filter The carbon fibre intake system is an attractive high performance upgrade for the 1.8T and 2.0T engines found in various vehicles on the MQB platform. The factory intake design has the foundation for excellent performance, but much of it is sacrificed in an effort to fulfil other design requirements. With requirements to support only factory power output, low noise levels and long service intervals, there is plenty of room for improvement. Expect more power and torque across the powerband with a more direct and responsive feel when operating the throttle. Engine and turbocharger noise will be improved and, depending on driving style, fuel consumption may even be reduced. In the endeavour to achieve an ideal pressure ratio (1:1) between inlet and outlet, the intake area has several important features. Through CFD optimisation and validation on the test bench, the filter housing of the intake section has been shaped into a spiral that uses the inertia of the air entering the system to increase the pressure on the outside of the filter. In this way, an even pressure distribution is achieved over the entire surface of the filter and not just at a few key points, maximising the utilisation of the filter area. Compared to many other common intake styles, the APR intake system allows the use of a small, compact filter with better filter utilisation than systems that are often twice the size. Unlike conventional open element filters, the APR intake system only draws air from the grille area near the front edge of the bonnet. In this way, air is drawn in from an area of relatively high pressure. As the speed of the vehicle increases, the pressure builds up further and ultimately supports the effectiveness of the intake system. By sealing the intake system, the pressure created by the ram air effect and the spiral shape is not simply lost in the engine compartment. This is in contrast to filters with open elements, which draw in air from a relatively low pressure range in the engine compartment. The design specifications called for an intake system that would only reproduce the true turbocharger sound of the engine when the air is drawn in through the turbocharger or expelled from the diverter valve when the throttle valve is lifted. The stiffness of the carbon fibre composite material results in engine intake resonance, allowing occupants to hear a clean and clear intake note without sounding intrusive or cheap. Compatible vehicles:Audi A3 (8V1, 8VK) 1.8 TFSI CJSA - 180 hpAudi A3 (8V1, 8VK) 1.8 TFSI quattro CJSB - 180 hpAudi A3 (8V1, 8VK) 2.0 TFSI CZPB - 190 hpAudi A3 (8V1, 8VK) 2.0 TFSI quattro CZPB - 190 hpAudi A3 (8V1, 8VK) S3 quattro CJXB - 280 hpAudi A3 (8V1, 8VK) S3 quattro CJXC - 300 hpAudi A3 (8V1, 8VK) S3 quattro CJXF - 286 hpAudi A3 (8V1, 8VK) S3 quattro CJXG - 310 hpAudi A3 (8V1, 8VK) S3 quattro DJHA - 310 hpAudi A3 Cabriolet (8V7, 8VE) 1.8 TFSI CJSA - 180 hpAudi A3 Cabriolet (8V7, 8VE) 1.8 TFSI CJSB - 180 hpAudi A3 Cabriolet (8V7, 8VE) 1.8 TFSI quattro CJSB - 180 hpAudi A3 Cabriolet (8V7, 8VE) 2.0 TFSI CZPB - 190 hpAudi A3 Cabriolet (8V7, 8VE) 2.0 TFSI quattro CZPB - 190 hpAudi A3 Cabriolet (8V7, 8VE) S3 quattro CJXC - 300 hpAudi A3 Cabriolet (8V7, 8VE) S3 quattro CJXF - 286 hpAudi A3 Cabriolet (8V7, 8VE) S3 quattro DJHA - 310 hpAudi A3 Cabriolet (8V7, 8VE) S3 quattro DNUE - 300 hpAudi A3 Saloon (8VS, 8VM) 1.8 TFSI CJSA - 180 hpAudi A3 Saloon (8VS, 8VM) 1.8 TFSI CJSB - 180 hpAudi A3 Saloon (8VS, 8VM) 1.8 TFSI quattro CJSB - 180 hpAudi A3 Saloon (8VS, 8VM) 2.0 TFSI CZPB - 190 hpAudi A3 Saloon (8VS, 8VM) S3 quattro CJXB - 280 hpAudi A3 Saloon (8VS, 8VM) S3 quattro CJXC - 300 hpAudi A3 Saloon (8VS, 8VM) S3 quattro CJXF - 286 hpAudi A3 Saloon (8VS, 8VM) S3 quattro CJXG - 310 hpAudi A3 Saloon (8VS, 8VM) S3 quattro DJHA - 310 hpAudi A3 Saloon (8VS, 8VM) S3 quattro DNUE - 300 hpAudi A3 Sportback (8VA, 8VF) 1.8 TFSI CJSA - 180 hpAudi A3 Sportback (8VA, 8VF) 1.8 TFSI CJSB - 180 hpAudi A3 Sportback (8VA, 8VF) 1.8 TFSI quattro CJSB - 180 hpAudi A3 Sportback (8VA, 8VF) 2.0 TFSI CZPB - 190 hpAudi A3 Sportback (8VA, 8VF) 2.0 TFSI quattro CZPB - 190 hpAudi A3 Sportback (8VA, 8VF) S3 quattro CJXB - 280 hpAudi A3 Sportback (8VA, 8VF) S3 quattro CJXC - 300 hpAudi A3 Sportback (8VA, 8VF) S3 quattro CJXF - 286 hpAudi A3 Sportback (8VA, 8VF) S3 quattro CJXG - 310 hpAudi A3 Sportback (8VA, 8VF) S3 quattro DJHA - 310 hpAudi A3 Sportback (8VA, 8VF) S3 quattro DNUE - 300 hpAudi Q2 (GAB, GAG) 2.0 TFSI quattro CZPB - 190 hpAudi Q2 (GAB, GAG) SQ2 TFSI quattro DNUE - 300 hpAudi Q3 (F3B) 40 TFSI quattro DKTC - 190 hpAudi Q3 (F3B) 45 TFSI quattro DKTA - 230 hpAudi Q3 Sportback (F3N) 40 TFSI quattro DKTC - 190 hpAudi Q3 Sportback (F3N) 45 TFSI quattro DKTA - 230 hpAudi TT (FV3, FVP) 1.8 TFSI CJSA - 180 hpAudi TT (FV3, FVP) 1.8 TFSI CJSB - 180 hpAudi TT (FV3, FVP) 2.0 TFSI CHHC - 230 hpAudi TT (FV3, FVP) 2.0 TFSI quattro CHHC - 230 hpAudi TT (FV3, FVP) 2.0 TTS quattro CJXF - 286 hpAudi TT (FV3, FVP) 2.0 TTS quattro CJXG - 310 hpAudi TT (FV3, FVP) 2.0 TTS quattro DNUF - 306 hpAudi TT (FV3, FVP) 45 TFSI DKTB - 245 hpAudi TT (FV3, FVP) 45 TFSI quattro DKTB - 245 hpAudi TT Roadster (FV9, FVR) 1.8 TFSI CJSA - 180 hpAudi TT Roadster (FV9, FVR) 1.8 TFSI CJSB - 180 hpAudi TT Roadster (FV9, FVR) 2.0 TFSI CHHC - 230 hpAudi TT Roadster (FV9, FVR) 2.0 TFSI quattro CHHC - 230 hpAudi TT Roadster (FV9, FVR) 2.0 TTS quattro CJXF - 286 hpAudi TT Roadster (FV9, FVR) 2.0 TTS quattro CJXG - 310 hpAudi TT Roadster (FV9, FVR) 2.0 TTS quattro DNUF - 306 hpAudi TT Roadster (FV9, FVR) 45 TFSI DKTB - 245 hpAudi TT Roadster (FV9, FVR) 45 TFSI quattro DKTB - 245 hpCupra Ateca (KH7, KHP) 2.0 TSI 4Drive DNUE - 300 hpCupra Formentor (KM7) 2.0 TSI 4Drive CZPB - 190 hpSeat Ateca (KH7, KHP) 2.0 TSI 4Drive CZPB - 190 hpSeat Leon (5F1) 1.8 TSI CJSA - 180 PSSeat Leon (5F1) 2.0 Cupra CJXA - 280 hpSeat Leon (5F1) 2.0 Cupra CJXC - 300 hpSeat Leon (5F1) 2.0 Cupra CJXE - 265 hpSeat Leon (5F1) 2.0 Cupra CJXH - 290 hpSeat Leon (5F1) 2.0 Cupra DNUC - 290 hpSeat Leon (5F1) 2.0 Cupra R CJXG - 310 hpSeat Leon SC (5F5) 1.8 TSI CJSA - 180 hpSeat Leon SC (5F5) 2.0 Cupra CJXA - 280 hpSeat Leon SC (5F5) 2.0 Cupra CJXC - 300 hpSeat Leon SC (5F5) 2.0 Cupra CJXE - 265 hpSeat Leon SC (5F5) 2.0 Cupra CJXH - 290 hpSeat Leon ST (5F8) 1.8 TSI CJSA - 180 hpSeat Leon ST (5F8) 2.0 Cupra CJXA - 280 hpSeat Leon ST (5F8) 2.0 Cupra CJXC - 300 hpSeat Leon ST (5F8) 2.0 Cupra CJXE - 265 hpSeat Leon ST (5F8) 2.0 Cupra CJXH - 290 hpSeat Leon ST (5F8) 2.0 Cupra DNUC - 290 hpSeat Leon ST (5F8) 2.0 Cupra 4Drive CJXC - 300 hpSeat Leon ST (5F8) 2.0 Cupra 4Drive DNUE - 300 hpSkoda Octavia III (5E3, NL3, NR3) 1.8 TSI CJSA - 180 hpSkoda Octavia III (5E3, NL3, NR3) 2.0 TSI RS CHHA - 230 hpSkoda Octavia III (5E3, NL3, NR3) 2.0 TSI RS CHHB - 220 hpSkoda Octavia III (5E3, NL3, NR3) 2.0 TSI RS DLBA - 245 hpSkoda Octavia III Combi (5E5, 5E6) 1.8 TSI CJSA - 180 hpSkoda Octavia III Combi (5E5, 5E6) 1.8 TSI CJSB - 180 hpSkoda Octavia III Combi (5E5, 5E6) 2.0 TSI RS CHHA - 230 hpSkoda Octavia III Combi (5E5, 5E6) 2.0 TSI RS CHHB - 220 hpSkoda Octavia III Combi (5E5, 5E6) 2.0 TSI RS DLBA - 245 hpSkoda Superb III (3V3) 2.0 TSI CHHB - 220 hpSkoda Superb III (3V3) 2.0 TSI 4x4 CJXA - 280 hpSkoda Superb III Estate (3V5) 2.0 TSI CHHB - 220 hpSkoda Superb III Estate (3V5) 2.0 TSI 4x4 CJXA - 280 hpVW Arteon (3H7, 3H8) 2.0 TSI CZPB - 190 hpVW Arteon (3H7, 3H8) 2.0 TSI 4motion DJHC - 280 hpVW Arteon (3H7, 3H8) 2.0 TSI 4motion DNUA - 272 hpVW Arteon SHOOTING BRAKE (3H9) 2.0 TSi CZPB - 190 hpVW Arteon SHOOTING BRAKE (3H9) 2.0 TSi 4motion DNUA - 272 hpVW Golf VII (5G1, BQ1, BE1, BE2) 2.0 GTI CHHA - 230 hpVW Golf VII (5G1, BQ1, BE1, BE2) 2.0 GTI CHHB - 220 PSVW Golf VII (5G1, BQ1, BE1, BE2) 2.0 GTI CXDA - 220 hpVW Golf VII (5G1, BQ1, BE1, BE2) 2.0 GTI DKTB - 245 hpVW Golf VII (5G1, BQ1, BE1, BE2) 2.0 GTI DLBA - 245 PSVW Golf VII (5G1, BQ1, BE1, BE2) 2.0 GTI Clubsport CJXE - 265 PSVW Golf VII (5G1, BQ1, BE1, BE2) 2.0 GTI Clubsport S CJXG - 310 PSVW Golf VII (5G1, BQ1, BE1, BE2) 2.0 GTI TCR DNUC - 290 PSVW Golf VII (5G1, BQ1, BE1, BE2) 2.0 R 4motion CJXC - 300 hpVW Golf VII (5G1, BQ1, BE1, BE2) 2.0 R 4motion CJXG - 310 hpVW Golf VII (5G1, BQ1, BE1, BE2) 2.0 R 4motion DJHA - 310 hpVW Golf VII (5G1, BQ1, BE1, BE2) 2.0 R 4motion DNUE - 300 hpVW Golf VII Estate (BA5, BV5) 1.8 TSI 4motion CJSB - 179 hpVW Golf VII Variant (BA5, BV5) 2.0 R 4motion CJXC - 300 hpVW Golf VII Variant (BA5, BV5) 2.0 R 4motion CJXG - 310 hpVW Golf VII Estate (BA5, BV5) 2.0 R 4motion DJHA - 310 hpVW Golf VII Variant (BA5, BV5) 2.0 R 4motion DNUE - 300 hpVW Passat ALLTRACK B8 Variant (3G5, CB5) 2.0 TSI 4motion CHHB - 220 hpVW Passat ALLTRACK B8 Variant (3G5, CB5) 2.0 TSI 4motion CJXA - 280 hpVW Passat B8 (3G2, CB2) 1.8 TSI CJSA - 180 hpVW Passat B8 (3G2, CB2) 1.8 TSI CJSC - 180 hpVW Passat B8 (3G2, CB2) 2.0 TSI CHHB - 220 hpVW Passat B8 (3G2, CB2) 2.0 TSI CXDA - 220 hpVW Passat B8 (3G2, CB2) 2.0 TSI CZPB - 190 hpVW Passat B8 (3G2, CB2) 2.0 TSI 4motion CJXA - 280 hpVW Passat B8 (3G2, CB2) 2.0 TSI 4motion DNUA - 272 hpVW Passat B8 Estate (3G5, CB5) 1.8 TSI CJSA - 180 hpVW Passat B8 Estate (3G5, CB5) 1.8 TSI CJSC - 180 hpVW Passat B8 Estate (3G5, CB5) 2.0 TSI CHHB - 220 hpVW Passat B8 Estate (3G5, CB5) 2.0 TSI CXDA - 220 hpVW Passat B8 Estate (3G5, CB5) 2.0 TSI CZPB - 190 hpVW Passat B8 Estate (3G5, CB5) 2.0 TSI 4motion CJXA - 280 hpVW Passat B8 Estate (3G5, CB5) 2.0 TSI 4motion DNUA - 272 hpVW Tiguan (AD1, AX1) 2.0 TSI 4motion CHHB - 220 hpVW Tiguan (AD1, AX1) 2.0 TSI 4motion CZPA - 180 hpVW Tiguan (AD1, AX1) 2.0 TSI 4motion DKTA - 230 hpVW Tiguan ALLSPACE (BW2, BJ2) 2.0 TSI 4motion CXDA - 220 hpVW Tiguan ALLSPACE (BW2, BJ2) 2.0 TSI 4motion DGVA - 180 hpVW Tiguan ALLSPACE (BW2, BJ2) 2.0 TSI 4motion DNJA - 220 hpVW Touran (5T1) 1.8 TSI CJSA - 180 hpVW T-Roc (A11, D11) 2.0 R 4motion DNUE - 300 hpVW T-Roc (A11, D11) 2.0 TSI 4motion CZPB - 190 hp

Facts: Performance increase (standard Golf R): 10-13hp, 12-15Nm Performance increase (tuned Golf R): 15-20hp, 25-30Nm Material: Carbon fibre Manufacturer: Eventuri Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) The MK8 Golf GTi/R intake manifold is a complete revision of the standard intake manifold up to the turbo inlet. Taking inspiration from our RS3 intake, we have maximised the space available to create an intake that is suitable for all power levels, from standard specification through to high performance systems with hybrid or full frame turbos. This intake system has been developed to provide the highest possible flow rate whilst achieving the lowest possible intake temperatures. Each component has been designed to give the turbo a smooth and clear flow path. The restrictive standard intake pipe with a diameter of 73 mm is replaced by an intake pipe with a larger diameter of 94 mm. The filter itself has an outer diameter of 192mm or 7.5? with a filter area of over 110,000mm^2. The patented Venturi housing is designed to provide the largest possible internal volume for the available space in the Golf engine bay and provides laminar flow to the turbo pipe. Finally, the duct seals the filter opening at the windscreen, but is not restricted by the standard intake alone. We have raised the front of the duct to now create an additional opening behind the bonnet, equivalent to an extra 7? diameter hole for the inlet to draw from. The resulting system can significantly outflow the stock airbox while keeping intake temperatures to a minimum with the sealed design. Dyno testing Our MK8 Golf intake has been independently tested by a renowned tuner in the UK, Regal Autosport. A MK8 Golf R was tested in original condition and with a tuning box. The tests were carried out on the same day, with the standard airbox being tested first and then the Eventuri. No other changes were made to the car. The first graph shows the results with a stock map. As can be seen, there is a measurable gain across the rev range of up to 12bhp. This gain is noticeable even in a standard vehicle on the road due to better throttle response and faster acceleration. The second diagram shows the results when using a tuning box that increases the flow requirement of the intake system. The tuning box was used for both the standard airbox and the Eventuri intake, with no changes made between tests. With a higher flow requirement, the stock airbox places a greater restriction on the turbo, which is evident by the significant gain achieved with the Eventuri fitted. We now have a power increase of up to 20 hp and 30 Nm across the entire rev range, which is even more noticeable on the road. We expect the gains to be even greater with higher tuning levels. The improvements are due to a combination of reasons: 1) The closed system keeps IAT levels low - the Golf's engine bay can heat up very quickly, so an open cone filter leads to an increase in IAT levels and therefore a loss of power. 2) The Venturi housing provides a smooth transition from the filter to the intake pipes, both of which are matched to an internal diameter of 94mm. This contributes to a more efficient operation of the turbo. 3) The entire system is made from pure pre-impregnated carbon fibre, which provides excellent insulation against heat and has smooth internal surfaces, unlike glass fibre, which has sharp resin lines. Parts certificate The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT Audi S3 (8Y) e1*2007/46*2060*.. DE/AT Audi TTS (FV/FVP/8S e1*2001/116*0369*.. DE/AT Cupra Ateca LCI e9*2007/46*6394*.. DE/AT Cupra Formentor e9*2007/46*4008*.. DE/AT Cupra Leon e9*2007/46*3167*.. DE/AT Skoda Octavia RS e8*2007/46*0355*.. DE/AT Skoda Superb e8*2007/46*0317*.. DE/AT Volkswagen Arteon R e1*2007/46*1725*.. DE/AT Volkswagen Golf 8 GTI e1*2007/46*2014*.. DE/AT Volkswagen Golf 8 GTI CS e1*2007/46*2014*.. DE/AT Volkswagen Golf 8R e1*2007/46*2014*.. DE/AT Volkswagen Tiguan R e1*2001/116*0450*.. DE/AT Volkswagen Tiguan R (AD1) e1*2007/46*0487*.. Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine type Audi A3 (8Y)S3 2.0 TFSI quattro228kW / 310hp1984cm³DNFB Audi Q2 (GA)SQ2 2.0 TFSI quattro221kW / 300hp1984cm³DNFC Cupra Ateca (KH)2.0 TSI 4Drive221kW / 300hp1984cm³DNFC Cupra Leon (KL)2.0 TSI221kW / 300hp228kW / 310hp1984cm³DNFCDNFB Cupra Formentor (KM)2.0 TSI 4Drive228kW / 310hp1984cm³DNFB VW Arteon2.0 TSI 4motionR 2.0 TSI 4motion206kW / 280hp235kW / 320hp1984cm³DNFEDNFG VW Golf 8GTI Clubsport/ED45 2.0 TSI221kW / 300hp1984cm³DNFC VW Golf 8R 2.0 TSI 4motionR 2.0 TSI 4motion 20Years235kW / 320hp245kW / 333hp1984cm³DNFGDNNF VW Passat B8 (3G)2.0 TSI 4motion206kW / 280hp1984cm³DNFE VW T-Roc (A1)2.0 TSI 4motion221kW / 300hp1984cm³DNFC VW Tiguan II (AD)R 2.0 TSI 4motion235kW / 320hp1984cm³DNFG

Facts: Performance increase (standard Golf R): 10-13hp, 12-15Nm Performance increase (tuned Golf R): 15-20hp, 25-30Nm Material: Carbon fibre Manufacturer: Eventuri Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) The MK8 Golf GTi/R intake manifold is a complete revision of the standard intake manifold up to the turbo inlet. Taking inspiration from our RS3 intake, we have maximised the space available to create an intake that is suitable for all power levels, from standard specification through to high performance systems with hybrid or full frame turbos. This intake system has been developed to provide the highest possible flow rate whilst achieving the lowest possible intake temperatures. Each component has been designed to give the turbo a smooth and clear flow path. The restrictive standard intake pipe with a diameter of 73 mm is replaced by an intake pipe with a larger diameter of 94 mm. The filter itself has an outer diameter of 192mm or 7.5? with a filter area of over 110,000mm^2. The patented Venturi housing is designed to provide the largest possible internal volume for the available space in the Golf engine bay and provides laminar flow to the turbo pipe. Finally, the duct seals the filter opening at the windscreen, but is not restricted by the standard intake alone. We have raised the front of the duct to now create an additional opening behind the bonnet, equivalent to an extra 7? diameter hole for the inlet to draw from. The resulting system can significantly outflow the stock airbox while keeping intake temperatures to a minimum with the sealed design. Dyno testing Our MK8 Golf intake has been independently tested by a renowned tuner in the UK, Regal Autosport. A MK8 Golf R was tested in original condition and with a tuning box. The tests were carried out on the same day, with the standard airbox being tested first and then the Eventuri. No other changes were made to the car. The first graph shows the results with a stock map. As can be seen, there is a measurable gain across the rev range of up to 12bhp. This gain is noticeable even in a standard vehicle on the road due to better throttle response and faster acceleration. The second diagram shows the results when using a tuning box that increases the flow requirement of the intake system. The tuning box was used for both the standard airbox and the Eventuri intake, with no changes made between tests. With a higher flow requirement, the stock airbox places a greater restriction on the turbo, which is evident by the significant increase achieved with the Eventuri fitted. We now have a power increase of up to 20 hp and 30 Nm across the entire rev range, which is even more noticeable on the road. We expect the gains to be even greater with higher tuning levels. The improvements are due to a combination of reasons: 1) The closed system keeps IAT levels low - the Golf's engine bay can heat up very quickly, so an open cone filter leads to an increase in IAT levels and therefore a loss of power. 2) The Venturi housing provides a smooth transition from the filter to the intake pipes, both of which are matched to an internal diameter of 94mm. This contributes to a more efficient operation of the turbo. 3) The entire system is made from pure pre-impregnated carbon fibre, which provides excellent insulation against heat and has smooth internal surfaces, unlike glass fibre, which has sharp resin lines. Parts certificate The manufacturer's specifications apply to installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT Audi S3 (8Y) e1*2007/46*2060*.. DE/AT Audi TTS (FV/FVP/8S e1*2001/116*0369*.. DE/AT Cupra Ateca LCI e9*2007/46*6394*.. DE/AT Cupra Formentor e9*2007/46*4008*.. DE/AT Cupra Leon e9*2007/46*3167*.. DE/AT Skoda Octavia RS e8*2007/46*0355*.. DE/AT Skoda Superb e8*2007/46*0317*.. DE/AT Volkswagen Arteon R e1*2007/46*1725*.. DE/AT Volkswagen Golf 8 GTI e1*2007/46*2014*.. DE/AT Volkswagen Golf 8 GTI CS e1*2007/46*2014*.. DE/AT Volkswagen Golf 8R e1*2007/46*2014*.. DE/AT Volkswagen Tiguan R e1*2001/116*0450*.. DE/AT Volkswagen Tiguan R (AD1) e1*2007/46*0487*.. Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine type Audi Q3 (F3)45 TFSI quattro180kW / 245hp1984cm³DNPA Cupra Formentor (KM)2.0 TSI180kW / 245hp1984cm³DNPA Cupra Leon (KL)2.0 TSI180kW / 245hp1984cm³DNPA Seat Tarraco (KN)2.0 TFSI 4Drive180kW / 245hp1984cm³DNPA Skoda Octavia IV (NX)RS 2.0 TFSI180kW / 245hp1984cm³DNPA Skoda KodiaqRS 2.0 TSI 4x4180kW / 245hp1984cm³DNPA VW Golf 8GTI 2.0 TSI180kW / 245hp1984cm³DNPA VW Tiguan II (AD)2.0 TSI 4motion180kW / 245hp1984cm³DNPA

KW coilover suspension DDC “Plug & Play” The “Plug & Play” solution for vehicles that have a standard electronic damper adjustment. KW also offers you the possibility to combine the active standard damper control of your sporty vehicle with the stainless steel KW DDC Plug & Play coilover suspension. In this way, you can continue to use the existing active damper control in your car such as VW Scirocco, VW Golf VI, VW Passat, BMW and other models in conjunction with a stepless lowering. The best thing about it: Apart from replacing the adaptive standard suspension with the KW DDC Plug & Play coilover suspension, no further conversion steps or even modifications to the on-board electronics are necessary. The adaptive KW dampers are simply connected to the original connectors of your car manufacturer via the KW DDC plug connection. The standard control unit then takes over the regulation and control of the KW DDC Plug & Play coilover suspension. Perfect symbiosis of an OEM control unit with the advantages of an adaptive KW coilover suspension Our suspension technology is compatible with the electronics of various car manufacturers. This means that the adaptive KW DDC Plug & Play coilover suspension is immediately recognized by the on-board electronics. All displays and controls of your standard vehicle remain fully functional and combine the advantages of an adaptive damping system with the stylish and sporty lowering of a high-quality KW coilover suspension. Due to the exclusive use of rust-free stainless steel and durable components, the functionality of the rust-free KW coilovers is maintained under all weather conditions. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, adjustment is also possible after a snowy winter, for example. No oxidation occurred on the KW threaded spring legs during a salt spray test. This means that the adjustment of the stepless lowering is not affected even after years. - the plug & play solution for sportiness or more ride comfort at the touch of a button with outstanding looks thanks to stepless lowering - Compatible with the standard suspension control unit - Vehicle-specific damper setups such as Comfort / Normal / Sport - Operation via series buttons in the interior Please note the requirements and information regarding this product: - Front and rear height adjustable (front threaded struts, rear springs with height adjustment + dampers) - Only for vehicles with electronic damper control Technical information: Product line: Street Performance Lowering front/rear (mm): 40-60/45-70 Design: DDC - Plug & Play Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinders Drive CUPRA     FORMENTOR (KM7, KMP) 07/2020-     1.5 eTSI     SUV     Gasoline/electric     110 kW     1498 cc     4     Front-wheel drive CUPRA     FORMENTOR (KM7, KMP) 07/2020-     1.5 TSI     SUV     Gasoline     110 KW     1498 cc     4     Front-wheel drive CUPRA     FORMENTOR (KM7, KMP) 07/2020-     2.0 TDI     SUV     Diesel     110 KW     1968 cc     4     Front-wheel drive CUPRA     FORMENTOR (KM7, KMP) 07/2020-     2.0 TSI     SUV     Gasoline     140 KW     1984 cc     4     Front-wheel drive CUPRA     FORMENTOR (KM7, KMP) 07/2020-     2.0 TSI     SUV     Gasoline     180 KW     1984 cc     4     Front-wheel drive CUPRA     FORMENTOR (KM7, KMP) 07/2020-     2.0 VZ     SUV     Gasoline     195 kW     1984 cc     4     Front-wheel drive

KW coilover suspension DDC “Plug & Play” The “Plug & Play” solution for vehicles that have a standard electronic damper adjustment. KW also offers you the possibility to combine the active standard damper control of your sporty vehicle with the stainless steel KW DDC Plug & Play coilover suspension. In this way, you can continue to use the existing active damper control in your car such as VW Scirocco, VW Golf VI, VW Passat, BMW and other models in conjunction with a stepless lowering. The best thing about it: Apart from replacing the adaptive standard suspension with the KW DDC Plug & Play coilover suspension, no further conversion steps or even modifications to the on-board electronics are necessary. The adaptive KW dampers are simply connected to the original connectors of your car manufacturer via the KW DDC plug connection. The standard control unit then takes over the regulation and control of the KW DDC Plug & Play coilover suspension. Perfect symbiosis of an OEM control unit with the advantages of an adaptive KW coilover suspension Our suspension technology is compatible with the electronics of various car manufacturers. This means that the adaptive KW DDC Plug & Play coilover suspension is immediately recognized by the on-board electronics. All displays and controls of your standard vehicle remain fully functional and combine the advantages of an adaptive damping system with the stylish and sporty lowering of a high-quality KW coilover suspension. Due to the exclusive use of rust-free stainless steel and durable components, the functionality of the rust-free KW coilovers is maintained under all weather conditions. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, adjustment is also possible after a snowy winter, for example. No oxidation occurred on the KW threaded spring legs during a salt spray test. This means that the adjustment of the stepless lowering is not affected even after years. - the plug & play solution for sportiness or more ride comfort at the touch of a button with outstanding looks thanks to stepless lowering - Compatible with the standard suspension control unit - Vehicle-specific damper setups such as Comfort / Normal / Sport - Operation via series buttons in the interior Please note the requirements and information for this product: - Front and rear height adjustable (front coilover struts, rear springs with height adjustment + dampers) - Only for vehicles with electronic damper control Technical information: Product line: Street Performance Lowering front/rear (mm): 40-60/40-65 Design: DDC - Plug & Play Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment front/rear: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinders Drive CUPRA     FORMENTOR (KM7, KMP) 07/2020-     2.0 TDI 4Drive     SUV     Diesel     110 KW     1968 cc     4     All-wheel drive CUPRA     FORMENTOR (KM7, KMP) 07/2020-     2.0 TSI 4Drive     SUV     Gasoline     140 KW     1984 cc     4     All-wheel drive CUPRA     FORMENTOR (KM7, KMP) 07/2020-     2.0 TSI 4Drive     SUV     Gasoline     228 KW     1984 cc     4     All-wheel drive CUPRA     FORMENTOR (KM7, KMP) 07/2020-     2.0 VZ 4Drive     SUV     Gasoline     245 KW     1984 cc     4     All-wheel drive CUPRA     FORMENTOR (KM7, KMP) 07/2020-     2.5 VZ5 4Drive     SUV     Gasoline     287 kW     2480 cc     5     All-wheel drive

KW V1 coilover suspension Sportiness paired with outstanding looks. With factory pre-configured damping.Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car. Stepless loweringThe KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or, in the case of non-wheel-guiding double-wishbone rear axles, on the rear axle height adjustment. The benchmark for sporty, dynamic tuning fansWith its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to enhance your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasureAs a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, the warranty is up to five years. - Optimally adjusted in advance- sporty and harmonious damping technology- Stainless steel technology "inox-line"- Individually height-adjustable- Tested adjustment range- Ready-to-install complete solution- High-quality components for a long service life- Complete documentation for easy handling Setup - factory pre-configured damping setupThe KW V1 has a vehicle-specific, permanently configured damper setup. The spring and damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving. Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. It is interesting to note that the KW V1 is particularly popular with tuning enthusiasts who prioritise the idea of show & shine. Please note the requirements and information regarding this product: - VA + HA height adjustable (VA threaded struts, HA springs with height adjustment + dampers) - For vehicles with electronic damper control, this must be deactivated. An electronics kit for deactivation is included in the scope of delivery, depending on the selection. Technical information: Product line: Street Performance Lowering VA/HA (mm): 40-60/40-65 Version: V1 Hardness adjustment: none Material: stainless steel Adjustment VA/HA: thread/thread Approval: parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinders Drive CUPRA     FORMENTOR (KM7, KMP) 07/2020-     2.0 TDI 4Drive     SUV     Diesel     110 KW     1968 cc     4     All-wheel drive CUPRA     FORMENTOR (KM7, KMP) 07/2020-     2.0 TSI 4Drive     SUV     Gasoline     140 KW     1984 cc     4     All-wheel drive CUPRA     FORMENTOR (KM7, KMP) 07/2020-     2.0 TSI 4Drive     SUV     Gasoline     228 KW     1984 cc     4     All-wheel drive CUPRA     FORMENTOR (KM7, KMP) 07/2020-     2.0 VZ 4Drive     SUV     Gasoline     245 kW     1984 cc     4     All-wheel drive

KW V3 coilover suspension Unlimited individuality for performance & comfort. Damper force adjustment separately for rebound & compression damping.As with every KW coilover suspension, our suspension engineers also develop a sporty and harmonious basic set-up for the vehicle-specific applications of the KW V3. In addition to tests on our KW 7-post driving dynamics test bench, we also carry out extensive test drives on country roads, the motorway and even on the Nürburgring Nordschleife, kilometre by kilometre, to guarantee you the perfect suspension set-up. For years, the KW V3, one of the world's top aftermarket products, has been the reference for coilover suspensions. With its damper characteristics, high-quality workmanship and excellent durability, it has impressed discerning sports car drivers, tuners, large and small series manufacturers such as Alpina, MTM, Manthey, Oettinger and many other well-known companies in the international automotive industry. Cutting-edge technology from motorsportYou get much more than a sporty lowering and excellent handling on all roads with the KW V3. It is based on our many years of experience as a suspension manufacturer and supplier in international motorsport, such as in the ADAC GT Masters touring car series, FIA GT1, FIA GT3, International GT Open, WTC, VLN and also in the legendary ADAC Zurich 24h Race Nürburgring.Similar to our racing coilovers from the KW Competition programme, the rebound and compression damping of the KW V3 can be adjusted independently of each other. This individual tuning option is appreciated by tuners, sports car manufacturers, tuners and demanding drivers worldwide. The perfect suspension setup for significantly more driving dynamicsIf you have already carried out initial performance modifications to your sporty road vehicle, it is easy to incorporate these into the damper set-up in a targeted manner with the KW V3. The patented KW valve technology for the separate adjustment of the rebound and compression damping allows you to customise the vehicle-specific basic set-up from KW. For example, the KW bottom valve, which can be adjusted in twelve clicks in the low-speed range of the compression damping, gives you the scope to even take the tyre characteristics of your high and ultra-high performance road tyres into account in the suspension set-up.Thanks to the patented compression adjustment at the lower piston end of the stainless steel housing, you don't even need any tools. The adjustable compression adjustment with its twelve precise clicks allows you to influence body roll and body roll movements by hand without having to change the rebound damping to match the spring rate.With the individually adjustable rebound damping of the KW V3, you can directly influence the handling and comfort through the exact click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery.By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car tracks more accurately and you have even more stability at higher cornering speeds. If, for example, you change from the approved wheel/tyre combinations of your car manufacturer to larger rims, you can use the KW V3 to perfectly match the handling of your car and your new alloy wheels. High-quality, customised and durableThe KW V3 is subjected to extensive quality tests during production and every single damper is checked. This is the only way we can fulfil our claim to provide a warranty of up to five years when a KW coilover suspension V3 is installed by a KW specialist dealer. Due to the filigree workmanship and the use of high-quality components, the KW coilover struts made of stainless steel, for example, are 100 per cent rust-free and have an unlimited service life.This means that the functionality of the stepless lowering system via the dirt-resistant KW trapezoidal thread and the KW polyamide threaded ring is not impaired even after many years. Thanks to the individual lowering with its stepless adjustment range, you can also emphasise the sportiness of your vehicle visually. A feature that is very popular in the performance-orientated tuning scene. - Freely adjustable damping technology in rebound and compression damping- inox-line stainless steel technology- Individual, stepless lowering- Tested adjustment range- high-quality components for a long service life- adjustable rebound damping with 16 exact clicks- 12-way adjustable compression damping with click adjustment- Unique, independently acting damping force adjustment Setup: The individually adjustable rebound & compression damping of the KW V3The KW V3 is the ideal accessory for performance-orientated drivers and tuning enthusiasts who demand a high level of sportiness from their vehicles. The dampers, which are separately adjustable in rebound and compression, allow extensive damper tuning with their sophisticated click adjustment. This makes it easy to directly influence the turn-in behaviour, directional stability, tyre grip and handling characteristics for safe controllability at the limit. Please note the requirements and information regarding this product: - VA + HA height adjustable (VA threaded struts, HA springs with height adjustment + dampers) - For vehicles with electronic damper control, this must be deactivated. An electronics kit for deactivation is included in the scope of delivery for the “YES” version of the product.  - Dampers have easy-to-use adjustment wheels. Due to their design, they can only be adjusted in the rebound stage when the piston rod is accessible. Technical information: Product line: Street Performance Lowering VA/HA (mm): 40-60/45-70 Version: V3 Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinders Drive CUPRA     FORMENTOR (KM7, KMP) 07/2020-     1.5 eTSI     SUV     Gasoline/electric     110 KW     1498 cc     4     Front-wheel drive CUPRA     FORMENTOR (KM7, KMP) 07/2020-     1.5 TSI     SUV     Gasoline     110 KW     1498 cc     4     Front-wheel drive CUPRA     FORMENTOR (KM7, KMP) 07/2020-     2.0 TDI     SUV     Diesel     110 kW     1968 cc     4     Front-wheel drive CUPRA     FORMENTOR (KM7, KMP) 07/2020-     2.0 TSI     SUV     Gasoline     140 KW     1984 cc     4     Front-wheel drive CUPRA     FORMENTOR (KM7, KMP) 07/2020- 2.0 TSI SUV Gasoline 180 kW 1984 cc 4 Front-wheel drive

KW V3 coilover suspension Unlimited individuality for performance & comfort. Damper force adjustment separately for rebound & compression damping.As with every KW coilover suspension, our suspension engineers also develop a sporty and harmonious basic set-up for the vehicle-specific applications of the KW V3. In addition to tests on our KW 7-post driving dynamics test bench, we also carry out extensive test drives on country roads, the motorway and even on the Nürburgring Nordschleife, kilometre by kilometre, to guarantee you the perfect suspension set-up. For years, the KW V3, one of the world's top aftermarket products, has been the reference for coilover suspensions. With its damper characteristics, high-quality workmanship and excellent durability, it has impressed discerning sports car drivers, tuners, large and small series manufacturers such as Alpina, MTM, Manthey, Oettinger and many other well-known companies in the international automotive industry. Cutting-edge technology from motorsportYou get much more than a sporty lowering and excellent handling on all roads with the KW V3. It is based on our many years of experience as a suspension manufacturer and supplier in international motorsport, such as in the ADAC GT Masters touring car series, FIA GT1, FIA GT3, International GT Open, WTC, VLN and also in the legendary ADAC Zurich 24h Race Nürburgring.Similar to our racing coilovers from the KW Competition programme, the rebound and compression damping of the KW V3 can be adjusted independently of each other. This individual tuning option is appreciated by tuners, sports car manufacturers, tuners and demanding drivers worldwide. The perfect suspension setup for significantly more driving dynamicsIf you have already carried out initial performance modifications to your sporty road vehicle, it is easy to incorporate these into the damper set-up in a targeted manner with the KW V3. The patented KW valve technology for the separate adjustment of the rebound and compression damping allows you to customise the vehicle-specific basic set-up from KW. For example, the KW bottom valve, which can be adjusted in twelve clicks in the low-speed range of the compression damping, gives you the scope to even take the tyre characteristics of your high and ultra-high performance road tyres into account in the suspension set-up.Thanks to the patented compression adjustment at the lower piston end of the stainless steel housing, you don't even need any tools. The adjustable compression adjustment with its twelve precise clicks allows you to influence body roll and body roll movements by hand without having to change the rebound damping to match the spring rate.With the individually adjustable rebound damping of the KW V3, you can directly influence the handling and comfort through the exact click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery.By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car tracks more accurately and you have even more stability at higher cornering speeds. If, for example, you change from the approved wheel/tyre combinations of your car manufacturer to larger rims, you can use the KW V3 to perfectly match the handling of your car and your new alloy wheels. High-quality, customised and durableThe KW V3 is subjected to extensive quality tests during production and every single damper is checked. This is the only way we can fulfil our claim to provide a warranty of up to five years when a KW coilover suspension V3 is installed by a KW specialist dealer. Due to the filigree workmanship and the use of high-quality components, the KW coilover struts made of stainless steel, for example, are 100 per cent rust-free and have an unlimited service life.This means that the functionality of the stepless lowering system via the dirt-resistant KW trapezoidal thread and the KW polyamide threaded ring is not impaired even after many years. Thanks to the individual lowering with its stepless adjustment range, you can also emphasise the sportiness of your vehicle visually. A feature that is very popular in the performance-orientated tuning scene. - Freely adjustable damping technology in rebound and compression damping- inox-line stainless steel technology- Individual, stepless lowering- Tested adjustment range- high-quality components for a long service life- adjustable rebound damping with 16 exact clicks- 12-way adjustable compression damping with click adjustment- Unique, independently acting damping force adjustment Setup: The individually adjustable rebound & compression damping of the KW V3The KW V3 is the ideal accessory for performance-orientated drivers and tuning enthusiasts who demand a high level of sportiness from their vehicles. The dampers, which are separately adjustable in rebound and compression, allow extensive damper tuning with their sophisticated click adjustment. This makes it easy to directly influence the turn-in behaviour, directional stability, tyre grip and handling characteristics for safe controllability at the limit. Please note the requirements and information regarding this product: - Front and rear height adjustable (front coilover struts, rear springs with height adjustment + dampers) - On vehicles with electronic damper control, this must be deactivated. An electronics kit for deactivation is included in the scope of delivery, depending on the selection. - Dampers have easy-to-use adjustment wheels. Due to their design, they can only be adjusted in the rebound stage when the piston rod is accessible. Technical information: Product line: Street Performance Lowering front/rear (mm): 40-60/40-65 Version: V3 Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment front/rear: Threaded/threaded Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinders Drive CUPRA     FORMENTOR (KM7, KMP) 07/2020-     2.0 TDI 4Drive     SUV     Diesel     110 KW     1968 cc     4     All-wheel drive CUPRA     FORMENTOR (KM7, KMP) 07/2020-     2.0 TSI 4Drive     SUV     Gasoline     140 KW     1984 cc     4     All-wheel drive CUPRA     FORMENTOR (KM7, KMP) 07/2020-     2.0 TSI 4Drive     SUV     Gasoline     180 KW     1984 cc     4     All-wheel drive CUPRA     FORMENTOR (KM7, KMP) 07/2020-     2.0 VZ 4Drive     SUV     Gasoline     228 kW     1984 cc     4     All-wheel drive CUPRA     FORMENTOR (KM7, KMP) 07/2020-     2.5 VZ5 4Drive     SUV     Gasoline     287 kW     2480 cc     5     All-wheel drive

Suitable for the following vehicles:Audi TT 8S 45 TFSI 2.0 TSI (EA888 Gen.4 DNP) 180kW / 245hpVW Golf VIII Type CD2.0 GTI (EA888 Gen.4 DNP) 180kW / 245hpVW Tiguan AD (FL) 2.0 TSI (EA888 Gen.4 DNP) 180kW / 245hpSkoda Octavia NX 2.0 TSI RS (EA888 Gen.4 DNP) 180kW / 245hpSkoda Kodiaq 2.0 TSI RS (EA888 Gen.4 DNP) 180kW / 245hpCupra Leon KL 2.0 TSI (EA888 Gen.4 DNP) 180kW / 245hpCupra Formentor VZ 2.0 TSI (EA888 Gen.4 DNP) 180kW / 245hp The Wagner Tuning Turbo Outlet has been specially developed for vehicles with the EA888 Gen.4 engine and Garrett turbocharger to optimise performance and response. With an innovative design and high-quality materials, this turbo outlet offers a plug-and-play solution for a wide range of vehicle models, including Audi, VW, Skoda and Seat. The Wagner Tuning Turbo Outlet is the ideal choice for discerning vehicle enthusiasts who want to get maximum power and performance from their vehicles.Optimised air mass flow: The Turbo Outlet has been developed using CFD flow simulations to maximise air mass flow and increase performance. Plug-and-play installation: Easy installation thanks to the plug-and-play design that allows direct replacement of the standard part. Reduction of turbulence: By increasing the internal diameter to Ø48mm, turbulence is minimised, resulting in improved airflow and optimised responsiveness. High-quality materials: CNC-machined from high-strength aluminium alloy and anodised black for durability and aesthetics.Made in Germany: Manufactured in Germany to the highest quality standards. Scope of delivery:1 x Turbo outlet (exhaust nozzle) With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).