Doors Carbon | fits BMW M2 (G87) S58 | Aulitzky Tuning

Facts: Power increase: 8-11hp, 8-10ft-lb Flow Bench Data: Stock intake 905 CFM : Eventuri intake 1025 CFM Brand: Eventuri Material: Carbon fibre Expertise: without The Porsche GT3 RS intake was developed to provide a more efficient flow path to the engine compared to the OEM airbox. By utilising our patented Venturi housing concept, the airflow can pass through the filters on a much less tortuous path, reducing the drag of the system. In addition, by increasing the total volume in the intake tract, the maximum flow capacity has also been increased. By using customised filters with an outer diameter of 192 mm or 7.5? and a filter surface area of over 110,000 mm^2 each, we have made optimum use of the available space. Intake air temperatures have also been minimised through a sealed system and the use of carbon fibre, which has a low coefficient of thermal conductivity across the wall thickness. The result is a real increase in performance and a noticeable improvement in throttle response. The Eventuri difference The 991 GT3 RS Eventuri system uses our patented carbon fibre housing, which provides an aerodynamically efficient airflow path from the filter to the engine. Flow tests We conducted flow tests using a Superflow SF-1020 to measure the maximum possible flow rate at a pressure drop of 28" H2O. The tests were performed on the same day under controlled conditions, using the same test fixture for each system. We tested our complete intake system compared to the stock airbox system. The results show an increase in maximum flow by an additional 120 CFM over the OEM airbox. Importantly, this was achieved with a sealed intake system so that intake temperatures are also kept to a minimum. Bench test Our GT3 RS intake was independently tested by ES Motors, who build high performance Porsches in the UK. The tests were carried out on a chassis dyno on the same day, one after the other. As you can see, there is a measurable gain across the rev range, not just at the peak, which is more important as the increased area under the graph shows that the intake has an impact beyond the headlines. This gain is noticeable even on a production car on the road through better throttle response and quicker acceleration. The first chart is the summary of the results and the second is a screenshot of the dyno test to show the gain in the mid-range. Compatible vehicles:VehicleTypePower outputDisplacementEngineYear of construction Porsche 911 (991.1)GT3 RS368kW / 500PS3996cm³MA1.76, MDG.GA04.15 - 12.20 Porsche 911 (991.2)GT3 RS383kW / 520PS3996cm³MA1.77, MDG.GB05.18 - 12.20

The 3DDesign carbon side skirts for F06 enhance the side view of the vehicle immensely. Our premium partner 3DDesign is known as a perfectionist and stands for a high degree of individuality as well as the continuous further development of the product range. These carbon side skirts not only impress with their sporty carbon fibre look, but also leave nothing to be desired in terms of aerodynamics.Incl. parts certificate Compatible vehicles:BMW 6 Convertible (F12) M6 2012-2018BMW 6 Convertible (F12) M6 Competition 2013-2015BMW 6 Convertible (F12) M6 Competition 2015-2018BMW 6 Coupe (F13) M6 2012-2017BMW 6 Coupe (F13) M6 Competition 2013-2015BMW 6 Coupe (F13) M6 Competition 2015-2017BMW 6 Gran Coupe (F06) M6 2013-2018BMW 6 Gran Coupe (F06) M6 Competition 2013-2015BMW 6 Gran Coupe (F06) M6 Competition 2015-2018

Facts: NOW WITH PARTS CERTIFICATE! Acceleration time : 60-130mph reduced by 0.2 seconds Brand: Eventuri Material: Carbon Colour: Carbon black Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) The F97/F98 OEM Intake, although awkward at first glance, is a very well thought-out system given the available space. The flow path from the filters to the turbo inlets is very direct and does not change direction as abruptly as the usual OEM airbox designs. So instead of a completely new design, we focussed on improving the OEM airbox with less restrictive flow and improved temperature efficiency. We have developed replacement filters made of non-woven fabric, which have a much higher flow rate compared to the paper filters. To lower air intake temperatures and force air into the airbox, we designed large front vanes that sit behind the grilles. The carbon vanes direct air into the ducts and effectively insulate the intake side of the airbox. The final piece is the carbon airbox lid, which doesn't increase performance, but allows for a more audible intake sound and gives the engine bay a much needed aesthetic improvement. The Eventuri intake system consists of a number of components designed for a specific purpose and manufactured to the highest standards. Here are the details for each component and the design ethos behind them: Each intake system consists of: 1 x carbon fibre airbox cover 2 x carbon fibre air scoops 4 x High flow direct replacement air filters Laser cut stainless steel brackets Dyno data : Coming soon Parts certificate The manufacturer's specifications apply for installation. The existence of a certificate is no guarantee that the product can be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24 Country ModelType approval* DE/AT BMW X3Me1*2007/46*1988*.. DE/AT BMW X3M Competition e1*2007/46*1988*.. DE/AT BMW X4M e1*2007/46*1988*.. DE/AT BMW X4M Competition e1*2007/46*1988*.. CH/LI BMW X3 M1BP684-1BP685 CH/LI BMW X4 M 1BP686-1BP687 Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of constructionBMW X3 (F97)M353kW / 480hp2993cm³S58 B30 A03.19 -BMW X4 (F98)M353kW / 480hp2993cm³S58 B30 A03.19 -

Looking to add a little more kick to your interior? Look no further, because we've just released our replacement bright red M1/M2 buttons for select F-Series vehicles. These buttons are manufactured from precision ABS plastic and finished with a hardwearing, UV and scratch resistant clear coat to ensure a long life in everyday use. Please note that this product is only suitable for M-series vehicles (see example image). Compatible vehicles:BMW 2 Coupe (F22, F87) M2 2015-2018BMW 2 Coupe (F22, F87) M2 CS 2019-2021BMW 2 Coupe (F22, F87) M2 Competition 2018-2021BMW 3 (F30, F80) M3 2014-2018BMW 3 (F30, F80) M3 CS 2018-2018BMW 3 (F30, F80) M3 Competition 2016-2018BMW 4 Convertible (F33, F83) M4 2014-2020BMW 4 Convertible (F33, F83) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 2014-2020BMW 4 Coupe (F32, F82) M4 CS 2017-2019BMW 4 Coupe (F32, F82) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 GTS 2016-2019BMW 5 (F10) M5 2011-2016BMW 5 (F10) M5 30th Anniversary 2014-2016BMW 5 (F10) M5 Competition 2013-2016BMW 6 Convertible (F12) M6 2012-2018BMW 6 Convertible (F12) M6 Competition 2013-2015BMW 6 Convertible (F12) M6 Competition 2015-2018BMW 6 Coupe (F13) M6 2012-2017BMW 6 Coupe (F13) M6 Competition 2013-2015BMW 6 Coupe (F13) M6 Competition 2015-2017BMW 6 Gran Coupe (F06) M6 2013-2018BMW 6 Gran Coupe (F06) M6 Competition 2013-2015BMW 6 Gran Coupe (F06) M6 Competition 2015-2018

The 3DDesign carbon rear spoiler for the E90 fits both the E90 M model and the standard E90.The spoiler lip is made entirely of carbon fiber and rounds off the rear of the 3 Series in a very sporty way. Compatible vehicles:BMW 3 (E90) M3 2007-2011BMW 3 (E90) M3 CRT 2011-2011BMW 3 (E90) 2011-2011