Includes the following services:
- Removing and replacing the connecting rod bearings
- Check and measure crankshaft journals
- Check and adjust the oil pump
- Clean all parts
- Wheel alignment
- Oil & filter change
- incl. all parts such as bearings, screws, seals, oil filter and engine oil (10W60)
- Entry in the service booklet with BMW registration number stamp
- 1 litre oil refill
In addition, and depending on requirements, we can also replace the spark plugs and engine mounts for an additional charge.
Please note:
This service can only be carried out at our company headquarters!
Includes the following services:
- Removing and replacing the connecting rod bearings
- Check and measure crankshaft journals
- Check and adjust the oil pump
- Clean all parts
- Wheel alignment
- Oil & filter change
- incl. all parts such as bearings, screws, seals, oil filter and engine oil (10W60)
- Entry in the service booklet with BMW registration number stamp
- 1 litre oil refill
In addition, and depending on requirements, we can also replace the spark plugs and engine mounts for an additional charge.
Please note:
This service can only be carried out at our company headquarters!
Includes the following services:
- Removing and replacing the connecting rod bearings
- Check and measure crankshaft journals
- Check and adjust the oil pump
- Clean all parts
- Wheel alignment
- Oil & filter change
- incl. all parts such as bearings, screws, seals, oil filter and engine oil (10W60)
- Entry in the service booklet with BMW registration number stamp
- 1 litre oil refill
In addition, and depending on requirements, we can also replace the spark plugs and engine mounts for an additional charge.
Please note:
This service can only be carried out at our company headquarters!
Beinhaltet folgende Leistungen:
- Lager der Pleuel ausbauen und erneuern
- Kurbelwellenzapfen prüfen und vermessen
- Ölpumpe prüfen und einstellen
- alle Teile reinigen
- Achsvermessung
- Öl, & -filter Wechsel
- inkl. aller Teile wie Lager, Schrauben, Dichtungen, Ölfilter und Motoröl (5W40)
- Eintrag mit BMW Hd.nr Stempel ins Service Heft
- 1l Öl zum Nachfüllen
Zusätzlich und je nach Bedarf können wir die Zündkerzen und die Motorlager gegen Aufpreis der Teile mit erneuern.
Hinweis:
Diese Leistung kann nur an unseren Firmensitz durchgeführt werden!
Beinhaltet folgende Leistungen:
- Lager der Pleuel ausbauen und erneuern
- Kurbelwellenzapfen prüfen und vermessen
- Ölpumpe prüfen und einstellen
- alle Teile reinigen
- Achsvermessung
- Öl, & -filter Wechsel
- inkl. aller Teile wie Lager, Schrauben, Dichtungen, Ölfilter und Motoröl (10W60)
- Eintrag mit BMW Hd.nr Stempel ins Service Heft
- 1l Öl zum Nachfüllen
Zusätzlich und je nach Bedarf können wir die Zündkerzen und die Motorlager gegen Aufpreis der Teile mit erneuern.
Hinweis:
Diese Leistung kann nur an unseren Firmensitz durchgeführt werden!
Beinhaltet folgende Leistungen:
- Lager der Pleuel ausbauen und erneuern
- Kurbelwellenzapfen prüfen und vermessen
- Ölpumpe prüfen und einstellen
- alle Teile reinigen
- Achsvermessung
- Öl, & -filter Wechsel
- inkl. aller Teile wie Lager, Schrauben, Dichtungen, Ölfilter und Motoröl (10W60)
- Eintrag mit BMW Hd.nr Stempel ins Service Heft
- 1l Öl zum Nachfüllen
Zusätzlich und je nach Bedarf können wir die Zündkerzen und die Motorlager gegen Aufpreis der Teile mit erneuern.
Hinweis:
Diese Leistung kann nur an unseren Firmensitz durchgeführt werden!
Beinhaltet folgende Leistungen:
- Lager der Pleuel ausbauen und erneuern
- Kurbelwellenzapfen prüfen und vermessen
- Ölpumpe prüfen und einstellen
- alle Teile reinigen
- Achsvermessung
- Öl, & -filter Wechsel
- inkl. aller Teile wie Lager, Schrauben, Dichtungen, Ölfilter und Motoröl (10W60)
- Eintrag mit BMW Hd.nr Stempel ins Service Heft
- 1l Öl zum Nachfüllen
Zusätzlich und je nach Bedarf können wir die Zündkerzen und die Motorlager gegen Aufpreis der Teile mit erneuern.
Hinweis:
Diese Leistung kann nur an unseren Firmensitz durchgeführt werden!
We are offering an original BMW boot lip suitable for the M3/M4 G80+G82 as a special offer.
BMW part number: 51 62 8 086 380
This original M Performance spoiler complements your vehicle and gives it a sporty look.
Product details:- Visual highlight at the rear of the vehicle.- Clearly emphasises the sporty character- High-quality and robust BMW quality
The lip was already temporarily glued to a vehicle, only new adhesive is required.
However, it has no damage or scratches. So like new!
SPECIAL PRICE - USED (AS NEW) - only one piece in stock!
Compatible vehicles:BMW 3 Series M3/Competition/CS Saloon G80
BMW part number: 51 11 7 88 65 45BMW launched these new M Heritage badges for the 2022 model year.
Compatible vehicles:BMW 2 Series (G87) M2BMW 3 Series (G80) M3BMW 3 Series (G80/G81) M3 Competition / xDriveBMW 4 Series (G82) M4BMW 4 Series (G82/G83) M4 Competition / xDriveBMW 4 Series (G82) M4 CSL
The BMW 50 Jahre M emblems are not officially approved for all vehicles, but are compatible with almost all F-series and G-series vehicles.
In order to determine the correct emblem with the appropriate diameter for you and your vehicle, we need the chassis number of your vehicle.
BMW part number: 63 13 5 A2A EC0These facelift rear lights adapt your BMW to the fresh look of the new LCI models.
The new innovative design and appearance gives the rear end of the vehicle an unmistakably elegant and sporty character.
- The latest LED technology for less energy consumption and more luminosity
- Adaptation to the current design language for vehicles before the facelift
- Sporty and modern appearance thanks to new look
- These are genuine BMW products and not replicas
Scope of delivery:
- 2 rear lights side panel LED (left and right)
- 2 tail lights tailgate LED (left and right)
- 2 water channels (left and right)
- Cable set
Compatible vehicles:
BMW M5 Saloon F90
BMW 5 Series Saloon G30
BMW part number: 36 12 5 A57 484
As an alternative to the conventional BMW emblem, the BMW Motorsport emblem signals a passion for racing and for the roots of the BMW M brand.
The BMW Motorsport logo with the staggered semicircles in blue, purple and red was first used in 1973 on the racing cars of BMW Motorsport GmbH, which had been founded the previous year. It was not until 1978 and the debut of the BMW M1 that the three colour stripes leaning to the right and based on the letter M followed, which to this day are a trademark with a particularly high recognition value and high identification power even beyond the motorsport scene.
Scope of delivery: Set of BMW hub covers (4 covers)
Compatible vehicles:BMW 1 Series 5-door F40BMW 2 Series Active Tourer F45BMW 2 Series Active Tourer U06BMW 2 Series Coupe G42BMW 2 Series Gran Coupé F44BMW 2 Series Gran Tourer F46BMW 3 Series Sedan G20BMW 3 Series M3 Sedan G80BMW 3 Series Touring G21BMW 4 Series Convertible G23BMW 4 Series Coupe G22BMW 4 Series Gran Coupe G26BMW 4 Series M4 Convertible G83BMW 5 Series Saloon G30BMW 5 Series Touring G31BMW 5 Series M5 F90BMW 6 Series Grand Turismo G32BMW 7 Series Saloon G11BMW 7 Series Long Saloon G12BMW 8 Series G14BMW 8 Series G14/G15/G16BMW 8 Series G15BMW 8 Series G16BMW 8 Series M8 F91BMW 8 Series M8 F92BMW M5 F90BMW X1 F48BMW X2 F39BMW X3 G01BMW iX3 G08BMW X3M F97BMW X4 G02BMW X4M F98BMW X5 G05BMW X5M F85BMW X5 M F95BMW X6 G06BMW X6M F86BMW X6 M F96BMW X7 G07BMW Z4 Roadster G29
BMW part number: 34 21 2 284 766
The S4007 brake pad is derived from a proven long-track racing pad used in motorsport. It has been specially developed for increased thermal performance and fulfils the requirements of ECE-R 13H (legal requirement in many countries).
-shorter braking distance-better brake response-Higher thermal load capacity
Notes:- Possible functional noise from brakes & brake systems. Due to the special design of the perforated and grooved BMW lightweight sports brake discs, functional noises may occur which, however, have no influence on the durability of the brake discs.- Please run in the vehicle carefully. The vehicle must be run in carefully for the first 200 km after installation! After that, the discs are fully effective.
Scope of delivery:2x brake pad (piece)
Compatible vehicles: 2 Series M2 F872 Series M2 Competition F872 Series M2 CS F873 Series M3 Saloon F803 Series M3 Competition Saloon F803 Series M3 CS Saloon F804 Series M4 Coupe F824 Series M4 Competition Coupe F824 Series M4 CS Coupe F824 Series M4 GTS Coupe F824 Series M4 Convertible F834 Series M4 Competition Convertible F83
BMW part number: 34 21 2 283 366
The S4007 brake pad is derived from a proven endurance racing pad used in motorsport. It has been specially developed for increased thermal performance and fulfils the requirements of ECE-R 13H (legal requirement in many countries).
The following significantly different properties compared to the standard brake pad must be taken into account:- Reduced comfort: The brake pad can cause significantly more noise. However, this does not restrict its function.- The brake force distribution is designed with racing in mind. This supports dynamic steering on the brakes and differs significantly from the standard configuration.- Increased stress on the brake discs: Due to the modified friction mechanisms, the brake disc wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is installed. It is essential to replace the brake disc if there are cracks of 13 mm or more, even before the brake pad wears out.
-shorter braking distance-better brake response-Higher thermal load capacity
Note:- Possible functional noise from brakes & brake systems. Due to the special design of the perforated and grooved BMW lightweight sports brake discs, functional noises may occur which, however, have no influence on the durability of the brake discs.- Please run in the vehicle carefully. The vehicle must be run in carefully for the first 200 km after installation! After that, it will be fully effective.
Compatible vehicles:5 Series E60 Saloon M5 [S85]5 Series E61 LCI Touring M5 E61N [S85]6 Series E63 Coupé M6 [S85]6 Series E64 Convertible M6 [S85]3 Series E90 Saloon M3 [S65]3 Series E90 LCI Saloon M3 E90N [S65]3 Series E92 LCI Coupé M3 [S65]3 Series E92 LCI Coupé M3 E92N [S65]3 Series E93 Convertible M3 [S65]3 Series E93 LCI Convertible M3 E93N [S65]
BMW part number: 11 42 7 848 321
Compatible vehicles: X5 E70 SAV X5 M [S63]X6 E71 SAC X6 M [S63]6 Series F06 Gran Coupé M6 [S63N]6 Series F06 LCI Gran Coupé M6 F06N [S63N]5 Series F10 Saloon M5 [S63N]6 Series F12 Convertible M6 [S63N]6 Series F12 LCI Convertible M6 F12N [S63N]6 Series F13 Coupé M6 [S63N]6 Series F13 LCI Coupé M6 F13N [S63N]X5 M F85 M SAV [S63R]X6 M F86 M SAC [S63R]5 Series M5 F90 Saloon M5 [S63M]F90 LCI Saloon M5 F90N [S63M]8 Series M8 F91 Convertible M8 [S63M]8 Series M8 F92 Coupé M8 [S63M]8 Series M8 F93 Gran Coupé M8 [S63M]X5 M F95 M SAV [S63M]X6 M F96 M SAC [S63M]
Genuine article - BMW part numbers: 51 11 5 A08 FE9, 51 11 5 A08 FF9
Matching the optional carbon fibre package, the M Performance Aero Flicks emphasise the sporty appearance of the BMW M3 or M4. The M Performance Aero Flicks made of carbon fibre give the vehicle a striking and characteristic front view.
All parts have been specially developed for the respective vehicles and can also be installed without the optional carbon fibre package.The aero flicks are customised for the BMW M3 G80 and M4 G82 G83.
-attractive, sporty look-optimised adjustment to the vehicle and the optional carbon package-easy assembly-Manufacture of the carbon parts in elaborate manual work-optimised aerodynamics-enhance the sporty driving behaviour-temperature-resistant-UV-resistant
The material (CFRP) is sealed with clear lacquer and is therefore UV and temperature resistant.Genuine M Performance parts impress with their first-class aerodynamics and enhance the sporty driving behaviour.An ABE (general operating licence) is not necessary as the parts are already homologated with the complete vehicle.
Scope of delivery:- 1x M Performance Aero Flick Carbon fibre right.- 1x M Performance Aero Flick Carbon left.
Material:- Carbon fibre reinforced plastic (CFRP)
Fitting instructions:- The bonding surfaces must be cleaned with a cleaner before installation and must be free of grease. - Please observe the curing times of the adhesive. When using liquid adhesive (e.g. 1K adhesive), the curing times must be observed.- The vehicle must not be moved for 24 hours.- The vehicle is only suitable for washing after at least 48 hours.
Compatible vehicles:BMW 3 Series M3/Competition/CS Saloon G80BMW M3 Competition Touring G81BMW 4 Series M4/Competition/CSL Coupé G82BMW 4 Series M4 Competition Convertible G83
Genuine product - BMW part numbers: 51 13 2 469 622 / 51 13 2 469 623
These original M Performance trim strips are made of carbon fibre-reinforced plastic.
The M Performance side panel mouldings are specially developed for the M4 and can also be installed without the optional carbon package.
-Unique differentiation option thanks to first-time design in high-quality visible carbon fibre-special development for the M4 Coupé guarantees 100% accuracy of fit-perfect adaptation to the vehicle design-optimised interaction with all other M Performance Parts-Complex production of the components for a high-quality appearance-Tested and approved in accordance with strict BMW Group quality guidelines-The material (CFRP) is sealed with clear lacquer and is therefore UV and temperature resistant-Original M Performance parts impress with first-class aerodynamics and enhance the sporty driving behaviour-Fulfilment of all legal requirements-Easy installation as with the standard components-An ABE (general operating licence) is not necessary, as the parts are already homologated with the complete vehicle
Details on the material:Parts of the side trim strips are made of carbon fibre-reinforced epoxy resin. After the carbon parts have hardened, a clear coat is applied to emphasise the depth effect of the 3K fabric and protect the matrix material (epoxy resin) from environmental influences.
Scope of delivery:- 1x M Performance trim moulding air intake carbon wing right- 1x M Performance carbon fibre left wing air intake trim strip
Notes:- Please note installation side: The installation location information "left" or "right" always refers to the direction of travel!
Compatible vehicles:BMW 4 Series M4/Competition Convertible G83BMW 4 Series M4/Competition Coupé G82
Genuine product - BMW part number: 51 16 2 405 919
The BMW M Performance armrest completes the M Performance interior look and ensures a well-rounded and high-quality overall appearance. Thanks to its functionality and high-quality materials, it also offers maximum comfort for the sporty driver.
The armrest impresses with its high-quality materials and special look: 100% Alcantara and carbon with a striking, three-colour M cross-stitch seam.The armrest is adjustable in length and has a high-gloss carbon fibre trim at the rear end.The design ensures a rounded, high-quality overall appearance: the stitching runs visually in a single line right up to the handbrake handle.-for maximum comfort: the driver can rest his arm comfortably on the soft Alcantara material.-The materials and high-quality workmanship complete the overall M Performance look across the entire centre console.
Compatible vehicles: 3 Series F80 Saloon M3 [S55]3 Series F80 LCI Saloon M3 F80N [S55]4 Series F82 Coupé M4 [S55]4 Series F82 LCI Coupé M4 F82N [S55]4 Series F82 LCI Coupé M4 CS F82N [S55]4 Series F83 Convertible M4 [S55]4 Series F83 LCI Convertible M4 F83N [S55]
Originalware - BMW Teilenummer: 41 31 2 460 277
Sportlichkeit ganz leicht gemacht: Das M Performance Fahrzeugdach ist aus hochwertigem Carbon gefertigt. Der großflächige Einsatz des Hightech-Materials verleiht dem Fahrzeug nicht nur einen einzigartig individuellen Look: Die Leichtbaukomponente sorgt auch für eine deutliche Gewichtsersparnis. Das Fahrzeugdach wurde nach den strengen BMW Qualitätsrichtlinien getestet und freigegeben. Besonders im Zusammenspiel mit weiteren M Performance Carbon-Komponenten für das Exterieur entsteht ein einzigartig sportliches Gesamterscheinungsbild.
Details:-Gefertigt aus hochwertigem Carbon-Die aus den großen Brüdern der BMW M Familie bekannte Sichtcarbonoberfläche wird mit einem neuen Sickenverlauf für ein noch sportlicheres Erscheinungsbild kombiniert-Erhebliche Gewichtseinsparung im Vergleich zum Serienfahrzeugdach-Der herabgesetzte Schwerpunkt verbessert die Querdynamik des Fahrzeugs spürbar-Perfekt abgestimmt auf die Geometrie und das Design des Fahrzeugs-Passend zu weiteren M Performance Carbon-Komponenten-Nach strengen BMW Qualitätskriterien getestet
Hinweis:Nach dem Einbau der Dachaußenhaut Carbon ist eine Montage von Dachgepäckträgern nicht mehr möglich.
Montagehinweise:Der Einbau ist ausschließlich durch Personen mit entsprechender Fachausbildung bzw. einem KFZ Fachbetrieb vorzunehmen.
Lieferumfang:1x Dachaußenhaut
Kompatible Fahrzeuge:BMW 2er M2 F87BMW 2er M2 F87 Competition
Genuine product - BMW part number: 11 12 2 413 815
The elaborately handcrafted engine cover is made from high-quality carbon fibre. It replaces the standard plastic cover and emphasises the individuality and sportiness of your vehicle with its high-tech character and design.
Advantages:- Customised, racing and high-quality look.- Manufactured in elaborate handwork- Material: high-quality, carbon fibre-reinforced plastic (CFRP, carbon)- The exclusive carbon fibre cover is given an unmistakable depth effect through several layers of paint and subsequent high-gloss polishing- Cylinder applications in aluminium look- Optimally matched to the design and geometry of BMW vehicles- The material is colour-fast and UV, temperature and water-resistant- Simple installation- Can be retrofitted at any time
Scope of delivery:- 1x carbon fibre cover
Compatible vehicles:BMW 2 Series M2/Competition/CS F87BMW 3 Series M3 Saloon F80BMW 4 Series M4 Convertible F83BMW 4 Series M4/CS/GTS Coupé F82
Genuine product - BMW part number: 11 14 8 058 667
This original M Performance engine cover made of high-quality carbon fibre is a real eye-catcher.The cover is handmade and finished with several layers of paint. This creates a racing look in the engine compartment.
-For a unique racing look in the engine compartment.Made from high-quality, elaborately handcrafted carbon fibre.-Painted several times and polished to a high gloss.-UV, temperature and water resistant.-Material quality tested in light fastness tests.
Scope of delivery:- 1x carbon engine cover- Mounting material
Fitting instructions:- All parts must be checked for accuracy of fit before installation on the vehicle.- Any bonding surfaces must be absolutely dry, clean and free of wax and grease.- Installation must be carried out in a temperature range of 18 °C to 35 °C.- As a rule, the vehicle must not be moved for 24 hours.- The vehicle is only suitable for washing after at least 48 hours.
Material:Painted carbon fibre
Compatible vehicles:BMW 5 Series M5 F90BMW 8 Series M8 F91BMW 8 Series M8 F92BMW M8 Gran Coupé F93
Genuine product - BMW part number: 61 31 9 501 592
Scope of delivery:-1x carbon rocker switch right-1x carbon rocker switch left
Notes:Installation must only be carried out by persons with the appropriate specialist training or a specialist automotive workshop.
Compatible vehicles:1 Series F402 Series F44, G873 Series G20, G21, G28, G80, G814 Series G22, G23, G26, G82, G835 Series F90, F90N, G30, G30N, G31, G31N6 Series G32, G32N8 Series F91, F92, F93, G14, G15, G16X3 F97, F97N, G01, G01NX4 F98, F98N, G02, G02NX5 F95, F95N, G05X6 F96, F96N, G06X7 G07XM G09Z4 G29
Genuine product - BMW part numbers: 51 19 2 365 984 / 51 19 2 365 985
Dynamic elegance meets individual sportiness: The M Performance sill attachment is made of 100 per cent carbon fibre and enhances the sporty look of the vehicle in a striking way. It impresses with its particularly low weight, high stability and perfect fit. The sticker set with M Performance lettering gives the sill an even more individualised appearance.
-Manufactured in elaborate handwork-optically perfectly adapted to the vehicle-all mounting parts and installation aids included
Scope of delivery:-1x sill cover (left)-1x sill attachment (right)-10x expanding rivets
Notes:-Please note the installation side: The installation location information "left" or "right" always refers to the direction of travel!-No installation by end users. Installation must only be carried out by persons with the appropriate specialist training or a specialist vehicle workshop.
Compatible vehicles:BMW 2 Series M2 F87BMW 2 Series M2 F87 Competition/CS
Genuine product - BMW part numbers: 51 16 2 466 669, 51 16 2 466 670
The elaborately handcrafted caps for the exterior mirrors are made of high-quality carbon fibre. They replace the standard exterior mirror caps and emphasise the individuality and sportiness of the vehicle with their high-tech character.The exclusive caps are given an unmistakable depth effect through several coats of paint and subsequent high-gloss polishing. The high quality of the materials used has been tested for light fastness by BMW.
Simple installation: The exterior mirror caps are clipped into the existing latches after removing the standard mirror caps.
No ABE required for listed BMW models. No ABE is supplied as the parts are already listed in the EC type approval.
Notes:Please note the installation side. The installation location information "left" or "right" always refers to the direction of travel!
Material:Mirror caps Carbon fibre reinforced plastic (CFRP) Clear lacquer sealed
Scope of delivery:1x mirror cap right1x mirror cap left
Compatible vehicles:BMW 5 Series Saloon G30BMW 5 Series Touring G31BMW 6 Series Grand Turismo G32BMW 7 Series Saloon G11/G12BMW 8 Series G14/G15/G16
Genuine product - BMW part number: 51 19 2 449 921
The BMW M Performance front attachment carbon emphasises the sporty appearance of your BMW and was specially developed for this vehicle.
Product details:-Attractive, sporty look-Optimised adjustment to the vehicle-Easy installation-The new design makes the front look significantly more powerful and enables a sportier driving style-Registration is not necessary-No ABE required for the BMW models listed. -The product has optimum aerodynamics and enhances sporty driving behaviour
Installation instructions:- Installation must only be carried out by persons with the appropriate specialist training or a specialist vehicle workshop.- All parts must be checked for accuracy of fit before installation on the vehicle.- Any bonding surfaces must be absolutely dry, clean and free of wax and grease.- Installation must be carried out in a temperature range of 18 °C to 35 °C.- As a rule, the vehicle must not be moved for 24 hours.- The vehicle is only suitable for washing after at least 48 hours.
MaterialCarbon fibre
Scope of delivery:2x front attachment (piece)
Compatible vehicles:BMW 5 Series M5 F90
Genuine product - BMW part number: 51 19 2 475 168
This original M Performance front attachment is made of carbon fibre-reinforced plastic.
Matching the special equipment carbon fibre package (SA71C), the M Performance front attachment emphasises the sporty and attractive appearance of the BMW M3 or M4. It was specially developed for the M3 Saloon and the M4 Coupé and can also be installed without the optional carbon fibre package (SA71C).
The front attachment gives the vehicle a striking and characteristic front view.The M Performance exterior components have optimum aerodynamics and enhance the sporty driving behaviour.
The carbon components are made of carbon fibre reinforced plastic (CFRP) and are sealed with clear lacquer.The materials are UV and temperature resistant.The installation of the rear spoiler is not mandatory for the installation of the front attachment, but optimum driving performance can only be achieved by combining the two products.
The front attachment has been tested for pedestrian protection requirements, among other things. It fulfils all legal requirements.Registration is not necessary.
Scope of delivery:1 M Performance front attachment carbon fibre.
Material:Carbon fibre reinforced plastic (CFRP)
Installation instructions:- Installation must only be carried out by persons with the appropriate specialist training or a specialist automotive workshop.- All parts must be checked for accuracy of fit before installation on the vehicle.- Any bonding surfaces must be absolutely dry, clean and free of wax and grease. - Installation must be carried out in a temperature range of 18 °C to 35 °C.- Please observe the curing times of the adhesive. When using liquid adhesive (e.g. 1K adhesive), the curing times must be observed.- The vehicle must not be moved for 24 hours.- The vehicle is only suitable for washing after at least 48 hours.
Compatible vehicles:BMW 3 Series M3/Competition Saloon G80BMW 3 Series M3 Competition Touring G81BMW 4 Series M4/Competition G82BMW 4 Series M4 Competition Convertible G83
Genuine product - BMW part number: 51 71 2 453 944
The M Performance front grilles emphasise the sporty look of the vehicle. Compared to the standard version, they offer a unique differentiation option thanks to the high-quality visible carbon fibre finish. The decorative grilles were specially developed for the specified vehicle series and are a 100% perfect fit. They are perfectly matched to the vehicle design and coordinated with all other M Performance Parts.
The visual highlight on the front of the vehicle is further enhanced with a BMW M2 logo.
After various tests, the M Performance front ornamental grilles were approved in accordance with strict BMW Group quality guidelines. All legal requirements are fulfilled.
Functionality:Only original BMW accessories guarantee a perfect fit. The carbon fibre front ornamental grilles are replaced with the standard ornamental grilles. They are fitted in the same way as the standard components.
Material information:Parts (frames) of the M Performance front ornamental grilles are made of high-quality carbon fibre. After the carbon parts have hardened, a clear coat is applied to emphasise the depth effect of the 3K weave and protect the matrix material (epoxy resin) from environmental influences. The elaborate production of the parts gives the components a high-quality appearance.
Scope of delivery:1x decorative grille
Compatible vehicles:BMW 2 Series M2 F87/F87NBMW 2 Series M2 Competition/CS F87/F87N