MOVIT DDE steel brake system 342x34mm (6 piston calliper) for the front axle, from 18 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined. The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications. The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple layer of paint.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts Attention: The conversion means that only rims with at least 18 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. MOVIT sports brake callipers, 6-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force MOVIT sports brake discs, 342x34mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Maximum fading resistance- Special alloy for high thermal conductivity MOVIT comfort brake pads- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x assembly material1x installation instructions and running-in instructions1x parts certificate Compatible vehicles:Audi A4 / S4 8K / B8Audi A5 / S5 8TVW Beetle 5CVW Golf IV 4motionVW Golf VII GTI / GTD 57 series pistonsVW Golf VII GTI / GTD 57 series pistonsVW GOLF VII GTI Clubsport / Performance 60 series pistonsVW T5 / T6 Multivan

MOVIT DDE steel brake system 370x35mm (6 piston calliper) for the front axle, from 18 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined. The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications. The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple paint finish.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts Attention: The conversion means that only rims with at least 18 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. MOVIT sports brake callipers, 6s5, 6-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force MOVIT sports brake discs, 370x35mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Maximum fading resistance- Special alloy for high thermal conductivity MOVIT comfort brake pads, BE-6s1- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x assembly material1x installation instructions and running-in instructions1x parts certificate Compatible vehicles:BMW 1 Series F20 / F21 (also M)Ford Focus RS CB4 / MKIIAudi RS3 8PAudi RS4 B5Audi S4 Type 8D / B5BMW M3 E46BMW M3 E46 CSLBMW M3 E92Ford Mustang V Shelby GT 500Mercedes Benz W639 Vito / VianoVolvo XC90 1st gen. from 2011 onwardsVW Golf VII GTI / GTD 57 series pistonsVW Golf VII GTI / GTD 57 series pistonsVW GOLF VII GTI Clubsport / Performance 60 series pistonsVW Golf VII RVW Golf VII RVW T5 / T6 Multivan

Charge and Boost Pipe Kit Ø70mm 7-speed DSG (DQ381) suitable for the following VAG 2.0TSI EA888 Gen.3: - VW Golf 7.5 GTI 2,0 TSI 162-228KW/220-310PS 7-speed DSG (incl. Performance, Clubsport/S & TCR)- VW Golf 7.5 R 2.0 TSI DSG 221-228KW/300-310PS 7-speed DSG- VW Arteon 2.0 TSI 140-206KW/190-280PS 7-speed DSG- VW T-Roc 2.0TSI 4Motion 140KW/190PS 7-speed DSG- VW T-Roc R 4Motion 221KW/300PS 7-speed DSG- Skoda Octavia 5E RS 2.0TSI 162-180KW/220-245PS 7-speed DSG- Skoda Superb 3V 2,0TSI 162KW/220PS 7-speed DSG- Skoda Superb 3V 2,0TSI 206KW/280PS 7-speed DSG- Audi Q2 40TFSI 140KW/190PS 7-speed DSG- Audi SQ2 221KW/300PS 7-speed DSG- Audi A3 8V 2,0TSI 140KW/190PS 7-speed DSG- Audi S3 8V 2.0TSI 221-228KW/300-310PS 7-speed DSG- Audi TT 8S 2.0TFSI 169KW /230PS 7-speed DSG- Audi TTS 8S 2.0TSI 228KW/310PS 7-speed DSG- Seat Leon 5F Cupra 2.0TSI 195-272KW/265-370PS 7-speed DSG (incl. Cupra ST 265-370 & Cupra R) Scope of delivery:4 silicone hoses2 aluminium charge air pipes8 hose clamps Note: This charge pipe kit is only compatible with our Wagner Tuning intercooler. With parts certificate (OPF models excluded) for easy registration according to §19 paragraph 3 of the StVZO.

The Wagner Tuning Competition intercooler kit for the VAG 1.8TSI - 2.0TSI engine is suitable for the following vehicles:VW Golf 7+7.5 GTI 2,0 TSI 162-228KW/220-310hp (incl. Facelift- Performance and Clubsport[S], as well as TCR models)VW Golf 7+7.5 R 2.0 TSI 221-228KW/300-310hp (incl. facelift models)VW Arteon 2.0 TSI 140-206KW/190-280hp (7-speed DSG only)VW T-Roc 2.0TSI 4Motion 140KW/190hp (not included in the parts certificate)VW T-Roc R 4Motion 221KW/300hp (not included in the parts certificate)Skoda Superb 3V 2,0TSI 162KW/220hpSkoda Superb 3V 2,0TSI 206KW/280hp With further modifications (see notes under data sheets) on the vehicle, also suitable for:Audi Q2 40TFSI 140KW/190hp* (not included in the parts certificate)Audi SQ2 221KW/300hp (not included in the parts certificate)Audi A3 8V 1,8TSI 132KW/180hp*Audi A3 8V 2,0TSI 140KW/190hp*Audi S3 8V 2.0TSI 221-228KW/300-310hp*Audi TT 8S 2.0TFSI 169KW / 230hp*Audi TTS 8S 2.0TSI 228KW/310hp*Seat Leon 5F Cupra 2,0TSI 195-272KW/265-370hp* (incl. Cupra ST 265-370 & Cupra R)Skoda Octavia 5E 1,8TSI 132KW/180hp*Skoda Octavia 5E RS 2.0TSI 162-180KW/220-245hp**The additional modifications increase the installation time to approx. 5-6 hours. Experience top performance with the Competition intercooler kit for your VW Golf 7 GTI! Get your VW Golf 7 GTI ready for the ultimate performance upgrade with our Competition intercooler kit. We have developed this kit to take your vehicle performance to a whole new level. Our intercooler has impressive mesh dimensions of 640 mm x 410 mm x 65 mm, offering an increased external charge air volume of 17 liters compared to the factory 9 liters. This means more air, more power and impressive acceleration for your Golf 7 GTI. Our specially developed competition high-performance mesh (Tube Fine) ensures optimum airflow to neighboring components such as the water cooler. Despite its size, our intercooler is surprisingly light at just 8.9 kg. The cast aluminium end boxes were created in the CAD system and optimized using CFD simulations to ensure optimal internal airflow. An integrated air duct in the end box ensures an even filling of the competition high-performance mesh. The intercooler inlets and outlets have been enlarged to an impressive Ø 70 mm and our kit includes reinforced silicone hoses to cope with the increased airflow. Compared to the factory intercooler, our intercooler offers significantly less back pressure, resulting in improved performance. All our intercoolers are equipped with an anti-corrosion coating with excellent heat conduction properties. This guarantees long-lasting and optimum cooling performance for a constant increase in performance. Replacing the factory intercooler with our kit is uncomplicated and can be carried out without any problems. Enjoy the benefits without costly modifications. Our products are subject to strict quality control procedures to ensure the highest standards. Prepare to conquer the road with your Golf 7 GTI. Boost your vehicle's performance and acceleration with our Competition intercooler kit and enjoy a top-class driving experience. Give your Golf 7 GTI the performance it deserves. Get ready to dominate the road! Advantages of the Wagner Tuning intercooler:- improved cooling performance- Charge air volume of 17 liters (instead of 8.9 liters OEM)- Inlets and outlets extended to Ø 70 mm- less back pressure- uncomplicated replacement (plug-and-play) Scope of delivery:1 intercooler2 silicone hoses2 hose clamps1 mounting material1 installation instruction1 parts certificate (OPF models excluded) With parts certificate (OPF models excluded) for easy registration according to §19 paragraph 3 of the StVZO.

This open intake with certificate offers maximum performance & brutal sound! The system can be combined with other type-approved components (exhaust systems and downpipes). This is also noted in the certificate. The intake consists of a carbon intake funnel, which is enlarged from 70mm to 152mm. This larger intake volume significantly improves the air flow compared to the standard intake. Air flow measurements on the Flowbench have shown an improvement of +33.8% compared to the series. Expertise:With parts certificate for the intake system in accordance with §19.3 for use in Germany.Combinability with other type-approved components has been tested and is permitted. The intake is suitable and authorised for the following vehicles:AUDI:S3 8V Sportback / Saloon 2.0 TSI OPF 300 PSS3 8V Sportback / Saloon 2.0 TSI 310 PSS3 8V Sportback / Saloon 2.0 TSI 300 PSTTS 8S 2.0 TSI OPF 306 HPTTS 8S 2.0 TSI 310 HPTT 8S 45 TFSI 245 HPTT 8S 2.0 TSI 230 HPSQ2 GA 2.0 TSI OPF 300 HPQ3 F3 45 TFSI 245 HP CUPRA:Ateca KH 2.0 TSI 300 hp SEAT:Leon Cupra 300 5F 2.0 TSI OPF 300 hpLeon Cupra 290 5F 2.0 TSI OPF 290 PSLeon Cupra R 5F 2.0 TSI 310 PSLeon Cupra 300 5F 2.0 TSI 300 PSLeon Cupra 290 5F 2.0 TSI 290 PSLeon Cupra 280 5F 2.0 TSI 280 PSLeon Cupra 265 5F 2.0 TSI 265 PS SKODA:Octavia RS 5E 2.0 TSI OPF 245 PSOctavia RS 5E 2.0 TSI 245 PSOctavia RS 5E 2.0 TSI 230 PSOctavia RS 5E 2.0 TSI 220 PSSuperb 3V 2.0 TSI 280 PSSuperb 3V 2.0 TSI 220 PS VW:Golf 7 R 2.0 TSI 300 PSGolf 7 R 2.0 TSI 310 PSGolf 7 GTI TCR 2.0 TSI OPF 290 PSGolf 7 GTI Clubsport S 2.0 TSI 310 PSGolf 7 GTI Clubsport 2.0 TSI 265 PSGolf 7.5 GTI Performance 2.0 TSI OPF 245 PSGolf 7.5 GTI Performance 2.0 TSI 245 PSGolf 7.5 GTI Performance 2.0 TSI 230 PSGolf 7 GTI Performance 2.0 TSI 230 PSGolf 7 GTI 2.0 TSI 220 PSPassat 3G 2.0 TSI 280 PSPassat 3G 2.0 TSI OPF 272 PSPassat 3G 2.0 TSI 220 PSArteon 3H 2.0 TSI OPF 272 PSArteon 3H 2.0 TSI 280 PSTiguan AD1 2.0 TSI OPF 230 PSTiguan AD1 2.0 TSI OPF 220 PSTiguan AD1 2.0 TSI 220 PST-Roc R A1 2.0 TSI OPF

The certificate includes the increase in rated power to 268kW (364PS).Note: The purchase of the performance upgrade does not include registration in the vehicle documents. This must be purchased separately.To get the maximum performance from your vehicle, we recommend filling up with premium fuel (100/102 octane) before and after the optimisation.Compatible vehicles:VehicleTypePower outputEngine capacityEngineYear of construction Seat Leon (5F)Cupra221kW / 300PS1984cm³CJXC01.17 - 08.18 VW Arteon (3H)2.0 TSI 4motion206kW / 280PS1984cm³DJH04.17 - VW Golf VII (AU)R 2.0 TSI 4motion213kW / 290PS228kW / 310PS1984cm³CJXD, DJHB12.16 - 08.20

The Wagner Tuning silicone hose kit for the VAG 1.8TSI - 2.0TSI engine is suitable for the following vehicles:Audi Q2 40TFSI 140KW/190hpAudi SQ2 221KW/300hpAudi A3 8V 1,8TSI 132KW/180hpAudi A3 8V 2,0TSI 140KW/190hpAudi S3 8V 2.0TSI 221-228KW/300-310hpAudi TT 8S 2.0TFSI 169KW / 230hpAudi TTS 8S 2.0TSI 228KW/310hpSeat Leon 5F Cupra 2.0TSI 195-272KW/265-370hp* (incl. Cupra ST 265-370 & Cupra R)Skoda Octavia 5E 1,8TSI 132KW/180hpSkoda Octavia 5E RS 2,0TSI 162-180KW/220-245hpSkoda Superb 3V 2,0TSI 162KW/220hpSkoda Superb 3V 2,0TSI 206KW/280hpVW Arteon 2.0 TSI 140-206KW/190-280hp (7-speed DSG only)VW Golf 7+7.5 GTI 2,0 TSI 162-228KW/220-310hp (incl. Facelift- Performance and Clubsport[S], as well as TCR models)VW Golf 7+7.5 R 2.0 TSI 221-228KW/300-310hp (incl. facelift models)VW T-Roc 2.0TSI 4Motion 140KW/190hpVW T-Roc R 4Motion 221KW/300hp Optimize the performance and reliability of your VAG 1.8-2.0TSI engine with the high-quality silicone hose kit from Wagner Tuning. Designed to improve intercooling and ensure a perfect fit, this kit offers a customized solution for your VAG 1.8-2.0TSI. Scope of delivery:2 silicone hoses4 hose clamps Compatibility:The silicone hose kit is exclusively compatible with our Wagner Tuning intercooler and offers hassle-free integration into VAG 1.8-2.0TSI models. High-quality material: The charge air hoses are made of high-quality silicone material, which offers excellent heat and pressure resistance and is designed for long-lasting performance. Improved performance: By optimizing the airflow, the cooling performance of the engine is improved, resulting in increased power and a more responsive ride. Easy installation: Supplied with four hose clamps, the kit is simple and straightforward to install with no additional modifications required. Optimized fit: The kit is specifically tailored to VAG 1.8-2.0TSI models and offers a perfect fit and optimum performance. Note: The item image is for illustrative purposes only. The actual shape of the product may vary slightly.

The Wagner Tuning Turbo Outlet has been developed to optimize the performance and responsiveness of vehicles with EA888 Gen.3 engines. Suitable for a wide range of VW, Audi, Skoda and Seat models, this turbo outlet offers a plug-and-play replacement for the standard part. It is specially designed to improve the air mass flow rate at the turbocharger outlet and thus achieve a higher maximum output. The Wagner Tuning Turbo Outlet for VAG EA888 Gen.3 with IHI Turbocharger IS38 is suitable for:Audi A1 8X 1.8TSI (MKB:DAJB) 141KW/191hpAudi S1 8X 2.0TSI (MKB:CWZA) 170-188KW/231-256hpAudi A3 8V 1.8 TSI (MKB:CJSB, CJSA) 132KW/180hpAudi S3 8V 2.0 TSI (MKB:CJXB, CJXF, CJXC, CJXD, DJHB, CJXG, DJHA) 206-228KW/280-310hpAudi TT 8S 2.0TSI (MKB: CHH) 169KW/230hpAudi TTS 8S 2.0 TSI (MKB: CJXG) 228KWSeat Ibiza 6J/6P 1.8TSI (MKB:DAJA) 141KW/191hpSeat Leon 5F 1.8 TSI (MKB:CJSA) 132/180hpSeat Leon 5F Cupra R/290/300 2.0 TSI (MKB:CJXE, CJXA, CJXH, CJXC) 195-221KW/265-300hpSkoda Octavia 5E 1.8TSI (MKB:CJSB) 132KW/180hpSkoda Octavia 5E RS 2.0TSI (MKB:CHHB, CHHA, DLBA) 162-180KW/220-245hpSkoda Superb 3T (3V) 4x4 2.0 TSI (MKB:CJXA) 206KW/280hpVW Golf VII 1.8 4x4 TSI (MKB:CJSB) 132KW/180hpVW Golf VII 2.0 R TSI (MKB:CJXB, CJXG, CJXC, DJHA) 206-228KW/280-310hpVW Golf VII GTI 2.0TSI (MKB:CHHA, CHHB, CXDA, CXCB, CHHA, DLBA, DNUC, CJXE, CJXG) 162-228KW/220-310hp (incl. Performance + TCR + Clubsport +CS S)VW Polo 6C GTI 1.8TSI (MKB: DAJA, DAJB(DSG)) 141KW/192hpVW Polo AW1 GTI 2.0TSI (MKB:CZPC) 147KW/200hpVW Tiguan 5N(AD1) 2.0 TSI 4Motion (MKB:CZPA) 132KW180hpVW Passat 3C 2.0TSI (MKB:CHHB, CXDA, CJXA) 162-206KW/220-280hp Optimized performance: The Turbo Outlet increases the inner diameter from Ø40mm to Ø44mm, resulting in a cross-sectional increase of almost 22% for improved performance and responsiveness.High-quality construction: Made from high-strength aluminum alloy and CNC-machined in Germany for outstanding quality and durability.Easy installation: The Turbo Outlet is supplied as a plug-and-play solution and is easy to install with no additional modifications required.Black anodization: The black anodization gives the Turbo Outlet an appealing look and protects it from corrosion. With the Wagner Tuning Turbo Outlet, you can take your vehicle's performance and driving experience to a new level while benefiting from easy installation and high-quality materials. Scope of delivery:1 x Turbo Outlet (exhaust nozzle) Attention: Not approved in the area of the StVZO.