MOVIT DDE steel brake system 342x28mm (4 piston calliper) for the front axle, from 18 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined. The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications. The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple layer of paint.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts Attention: The conversion means that only rims with at least 18 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. MOVIT sports brake callipers, 4s6, 4-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force MOVIT sports brake discs, 342x28mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Maximum fading resistance- Special alloy for high thermal conductivity MOVIT brake pads, comfort BE-4s6- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x assembly material1x installation instructions and running-in instructions1x parts certificate Compatible vehicles:Audi S1 8XVW Polo 6R WRC

The competition intercooler kit fits the following vehicles:Audi A1 1.4 TSI 136KW/185hp (2010+)Audi A1 Quattro 2,0TFSI 188KW/256hp (2012) limited EditionAudi A1 1,6TDI 66-77KW/90-105hp (2011-2014)->additional adjustment to the water cooler necessaryAudi A1 2.0TDI 105KW/143hp (2011-2014)Skoda Fabia RS 1.4 TSI 132KW/180hp (2010+)Skoda Fabia 1.6TDI 66-77KW/90-105hp (2010-2014)VW Polo 6R GTI 1,4 TSI 132KW/180hp (2010-2014)VW Polo 6R WRC 2.0 TSI 162KW/220hp (2013-2014)VW Polo 6C GTI 1.8 TSI 141KW/192hp (2015+) Also suitable for the following models with slight modifications:Seat Ibiza / Cupra 1.4 TSI /1.8TSI*Seat Ibiza 1.6/2.0TDI 66-105KW/90-143hp (2009-2015)**Explanation can be found on the last page of the installation instructions Optimize the performance of your Audi A1 1.4 TSI with our competition intercooler kit! If you're looking for a way to boost the performance of your Audi A1 1.4 TSI, then our competition intercooler kit is the perfect solution. Here are some of the impressive features that make this kit stand out: With mesh dimensions of 590 mm x 170 mm x 100 mm, our intercooler offers a considerable 70% larger flow area compared to the standard cooler. This means that your engine gets more fresh air, resulting in improved combustion and therefore increased performance. Our kit offers an astonishing 112% more charge air volume than the factory radiator. This results in increased power and a noticeable increase in torque. The Competition high performance mesh provides excellent cooling properties and ensures that your engine always maintains the optimum operating temperature. Despite its impressive power increase, our intercooler is lightweight at just 6.6 kg and does not add unnecessary weight to your vehicle. CAD-developed free-form end boxes made of cast aluminium ensure the best possible internal airflow and minimize back pressure compared to the standard radiator. Our kit is completely ready to install and allows easy replacement with the factory intercooler. It is a plug and play upgrade. All our intercoolers are coated with an anti-corrosion coating that also has heat conduction properties. This guarantees long-lasting and optimal cooling. Our kit has been tested to up to 6 bar and has proven its pressure stability. If you like to use your vehicle on the racetrack, this kit will meet your requirements. We place great emphasis on quality and continuously monitor the manufacture of our products to ensure they meet the highest standards. Take the opportunity to take the performance of your Audi A1 1.4 TSI to the next level. Visit our website for more information and to order your kit. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 70% larger inflow area- 112% more charge air volume- less back pressure- Plug & Play Scope of delivery:1 intercooler1 assembly instructionAttention: Not approved in the area of the StVZO.

The Wagner Tuning Turbo Outlet has been developed to optimize the performance and responsiveness of vehicles with EA888 Gen.3 engines. Suitable for a wide range of VW, Audi, Skoda and Seat models, this turbo outlet offers a plug-and-play replacement for the standard part. It is specially designed to improve the air mass flow rate at the turbocharger outlet and thus achieve a higher maximum output. The Wagner Tuning Turbo Outlet for VAG EA888 Gen.3 with IHI Turbocharger IS38 is suitable for:Audi A1 8X 1.8TSI (MKB:DAJB) 141KW/191hpAudi S1 8X 2.0TSI (MKB:CWZA) 170-188KW/231-256hpAudi A3 8V 1.8 TSI (MKB:CJSB, CJSA) 132KW/180hpAudi S3 8V 2.0 TSI (MKB:CJXB, CJXF, CJXC, CJXD, DJHB, CJXG, DJHA) 206-228KW/280-310hpAudi TT 8S 2.0TSI (MKB: CHH) 169KW/230hpAudi TTS 8S 2.0 TSI (MKB: CJXG) 228KWSeat Ibiza 6J/6P 1.8TSI (MKB:DAJA) 141KW/191hpSeat Leon 5F 1.8 TSI (MKB:CJSA) 132/180hpSeat Leon 5F Cupra R/290/300 2.0 TSI (MKB:CJXE, CJXA, CJXH, CJXC) 195-221KW/265-300hpSkoda Octavia 5E 1.8TSI (MKB:CJSB) 132KW/180hpSkoda Octavia 5E RS 2.0TSI (MKB:CHHB, CHHA, DLBA) 162-180KW/220-245hpSkoda Superb 3T (3V) 4x4 2.0 TSI (MKB:CJXA) 206KW/280hpVW Golf VII 1.8 4x4 TSI (MKB:CJSB) 132KW/180hpVW Golf VII 2.0 R TSI (MKB:CJXB, CJXG, CJXC, DJHA) 206-228KW/280-310hpVW Golf VII GTI 2.0TSI (MKB:CHHA, CHHB, CXDA, CXCB, CHHA, DLBA, DNUC, CJXE, CJXG) 162-228KW/220-310hp (incl. Performance + TCR + Clubsport +CS S)VW Polo 6C GTI 1.8TSI (MKB: DAJA, DAJB(DSG)) 141KW/192hpVW Polo AW1 GTI 2.0TSI (MKB:CZPC) 147KW/200hpVW Tiguan 5N(AD1) 2.0 TSI 4Motion (MKB:CZPA) 132KW180hpVW Passat 3C 2.0TSI (MKB:CHHB, CXDA, CJXA) 162-206KW/220-280hp Optimized performance: The Turbo Outlet increases the inner diameter from Ø40mm to Ø44mm, resulting in a cross-sectional increase of almost 22% for improved performance and responsiveness.High-quality construction: Made from high-strength aluminum alloy and CNC-machined in Germany for outstanding quality and durability.Easy installation: The Turbo Outlet is supplied as a plug-and-play solution and is easy to install with no additional modifications required.Black anodization: The black anodization gives the Turbo Outlet an appealing look and protects it from corrosion. With the Wagner Tuning Turbo Outlet, you can take your vehicle's performance and driving experience to a new level while benefiting from easy installation and high-quality materials. Scope of delivery:1 x Turbo Outlet (exhaust nozzle) Attention: Not approved in the area of the StVZO.