Wagner Tuning Competition Intercooler Kit fits for:Subaru WRX STI GD C-E 2,0 Turbo 195KW/265hp (2002-2005) RHD**Please note that this intercooler is only suitable for RHD vehicles (right-hand drive). Boost the performance of your Subaru WRX STI to a new level with our impressive Competition high performance intercooler. With net dimensions of 530 mm x 205 mm x 95 mm and a generous charge air volume of 10.3 liters, this intercooler offers a 23.6% larger flow area and provides an impressive 95.5% more charge air volume compared to the standard intercooler. Specially developed for the requirements of the Subaru WRX STI, our new competition high-performance mesh (Tube Fin) sets new standards. The cast aluminium end boxes have been optimized using CAD technology and CFD simulations to ensure the best possible internal airflow. The intercooler inlets and outlets remain unchanged, while the back pressure is minimally reduced. With our anti-corrosion coating, which has excellent heat conduction properties, your intercooler is optimally protected against environmental influences. This guarantees long-lasting and optimum cooling, accompanied by a significant increase in performance. Installation is done in no time at all by replacing the OEM intercooler. Thanks to our plug-and-play function, installation is child's play. You don't need any technical expertise. Our intercooler kit for the Subaru WRX STI has been manufactured with the utmost care and is subject to constant quality control to guarantee you the best possible quality. Technical details:- Net dimensions: 530 mm x 205 mm x 95 mm (10.3 liters)- 23.6% larger inflow area, 95.5% more charge air volume- Optimized competition high-performance mesh (Tube Fin)- Reduced back pressure compared to the standard intercooler- Anti-corrosion coating with heat conduction properties- Simple installation (plug and play) Our Competition Intercooler Kit for the Subaru WRX STI gives you the opportunity to unlock the full potential of your vehicle. Order today and experience a driving experience that will thrill you! Dimensions original intercooler:475mm x 185mm x 60mmV=5.27 litersA=878.75 cm² Wagner Tuning intercooler dimensions:530mm x 205mm x 95mmV=10.3 litersA=1086 cm² Scope of delivery:1 intercooler (black coated)1 air duct2 Silicone hose (black)1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.

The Competition Intercooler Kit is suitable for:Subaru WRX STI 2,5 Turbo 221KW/300hp (2007-2013)*.* Not suitable for vehicles with strut brace. Get the best out of your Subaru WRX STI with the Wagner Tuning high performance intercooler kit Ready for a thrilling driving experience that takes the performance of your Subaru WRX STI to a whole new level? Our Wagner Tuning high performance intercooler kit is the answer to your dreams. With state-of-the-art technology and a customized design, this kit provides an impressive performance boost and an unforgettable driving experience. Our high performance intercooler is equipped with an innovative Competition Mesh (Tube Fin) that is specifically tailored to the requirements of your Subaru WRX STI. With impressive dimensions of 530 mm x 220 mm x 95 mm (11.08 liters), this high-performance mesh offers a whopping 30% more mesh volume and an impressive 100% more charge air volume compared to the standard intercooler. The result: a significant increase in performance and cooling capacity. Our cast aluminium end boxes were designed in the CAD system and optimized using CFD simulations to perfect the internal air flow. The intercooler inlets and outlets have not been changed and the back pressure is the same as the standard intercooler. This means that seamless integration and simple installation are guaranteed without the need for complex adjustments. Our charge air coolers are equipped with an anti-corrosion coating that not only protects against environmental influences, but also offers excellent heat conduction properties. This means that you can expect long-lasting and optimum cooling performance. Installation is carried out by replacing the OEM intercooler and is simple to perform (plug-and-play). Each of our products is subject to strict quality control to ensure that it meets the highest standards. Boost the performance of your Subaru WRX STI and experience a whole new dimension of driving pleasure. With the Wagner Tuning High Performance Intercooler Kit you are ready for the road and the track. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 30 % more net volume- 100 % more charge air volume- Installation without complex modifications Dimensions original intercooler:530mm x 170mm x 61.5mmV=5.54 litersA=90,100 mm² Wagner Tuning intercooler dimensions:530mm x 220mm x 95mmV=11.08 litersA=116,600 mm² Scope of delivery:1 intercooler2 Air guide plate1 silicone hose1 mounting material1 assembly instructionAttention: Not approved in the area of the StVZO.

The Competition intercooler kit is suitable for:Subaru WRX STI 2,5 Turbo 221KW/300hp (2014-)**Not suitable for vehicles with strut brace. Optimize the performance of your Subaru WRX STI with our Wagner Tuning Competition high performance intercooler! Our intercooler sets new standards. With net dimensions of 530 mm x 205 mm x 95 mm (10,300 cm³ in total), it offers an impressive 20% larger flow area and a considerable 86% more charge air volume compared to the standard intercooler. This results in a noticeable increase in performance and a better overall driving experience. Our high performance mesh has been specifically designed to meet the requirements of your Subaru WRX STI. It is a state of the art Tube Fin mesh that provides optimal performance and cooling. Our cast aluminium end boxes were created in CAD and optimized with CFD simulations to ensure the best possible internal airflow. The result: outstanding cooling performance with constant back pressure compared to the standard intercooler. Our intercoolers are equipped with an anti-corrosion coating that not only protects against environmental influences, but also offers excellent heat dissipation properties. This ensures long-lasting and optimum cooling with a clear increase in performance. Installation is carried out by replacing the standard intercooler and is simple to perform - a plug-and-play upgrade that delivers immediate results. All our products are subject to strict quality control to ensure you get only the best. It's time to take the performance of your Subaru WRX STI to a new level. With our Competition high performance intercooler, you can expect more power, better cooling and an overall improved driving experience. Experience the future of performance enhancement. Invest in quality and boost the performance of your Subaru WRX STI with our Competition high performance intercooler! Advantages of the Wagner Tuning intercooler:- improved cooling performance- 20% larger inflow area- 86% more charge air volume- Optimum cooling- plug-and-play Dimensions original intercooler:530mm x 170mm x 61,5mmV=5.54 litersA=901 cm² Dimensions Wagner Tuning intercooler:530mm x 205mm x 95mmV=10.30 litersA=1086 cm² Scope of delivery:1 intercooler (black coated)1 air duct1 silicone hose (black)1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.

Here we present our display for the Subaru Impreza 2007-2011 including WRX STI. Access to all data from the engine control unit. So ALL. The sensors are queried directly via Can Bus and are displayed on our tried and tested MFD32. The Subaru Impreza display comes with a vehicle-specific panel and fits into the interior like an original part. The ventilation remains intact through the slots. The sensors are interrogated via OBD2 and directly from the Can Bus. We have optimised the protocol to achieve maximum polling speed. Details:- Integrates perfectly into the vehicle interior- Up to 128 sensors can be interrogated- 10 individually configurable views with our DSS - Display Setup Software- ready-made views for a quick start with our display- simply plug and play via our cable set - plug in, done- 4 additional analogue inputs for exhaust gas temperature, oil pressure and more- Best readability - optional anti-reflective film included- Query the sensors like manufacturer diagnostic tools Performance metre:Measure your acceleration times in our performance widget - 0-100, 100-200, 0-200 Data jogging:Log all data to the internal SD card. Whether "on-demand" (start with a tap) or permanently. All data from your last turn is saved. Preset alarms:Preset alerts can be easily activated and customised. For example, receive a large warning message if the exhaust gas temperature is above 900 degrees. 4 additional analogue inputs:Additional temperature and/or pressure sensors can be connected for further monitoring options. e.g. exhaust gas temperature or exhaust gas back pressure. An ethanol sensor can be connected to one of the digital inputs. Read out/delete errors:Read out errors from the engine control unit in plain text and also delete them Customised design:Whether it's the customised start screen or the selection from a variety of different widgets. Make the display your display! Access to all data from the engine control unit:We supply your display with a ready-made TRI file as standard. All sensors that are queried are defined here. Temperatures:Engine water temperature, intake temperature, outside temperature, petrol temperature, catalytic converter temperature Pressures:Boost pressure, ambient pressure Lambda/mixture:Lambda value target/actual, short-term lambda adjustment, long-term lambda adjustment, MAF, engine load, torque Driver dynamics:Bemse in per cent, steering angle, vehicle speed, throttle angle/gas pedal position, longitudinal and lateral acceleration, yaw acceleration Other data:RPM, fuel level, 4x wheel speed, vehicle speed, total ignition angle, gear, battery voltage, MapSelect, DCCD, low beam, high beam, engine control light, handbrake, brake light switch, ESP Analogue inputs:Additional sensors can be added here: Oil temperature, petrol pressure, oil pressure, exhaust gas temperature, etc If values are missing, they can easily be added. ATTENTION: not every engine offers all values! For which engines and models is the Subaru Impreza 2007-2011 display:The display bezel fits all Subaru Impreza 2007-2011 incl. WRX STI left-hand drive vehicles. A version for RHD (right-hand drive) is also available. MFD32 Technical data:- Dimensions: 89 x 60mm - Hardware: 3.2" TFT screen, touchscreen, MicroSD, MicroUSB- Symmetrical display - ideal for rotating it by 90- Views can be freely configured directly on the display or with our DSS - Display Setup Software on the PC- Up to 64 widgets per display- 64 sensors (Can Bus + internal)- 10 views- 4x analogue inputs- 2x speed input- Optional external switching flash- Can bus switching Supported values:Many customers always ask: "Which values can I query from my control unit? The answer: "ALL". Our MFD32 is compatible with ISO 11898-2 and SAE J2284.The control unit manufacturers themselves determine which values are sent via the CAN bus interface. The documentation is important here - possibly even in the form of a DBC file that can be imported directly. You can also access our extensive list of already implemented control units. This can be found in the download area. A total of up to 50 sensors can be queried if the manufacturer supports this.Broadcast data as well as OBD2 queries via Can Bus (11bit/29bit) are implemented. Special protocols such as TP2.0 from VW/Audi and UDS are also available. DSS - Display Setup Software:With our DSS - Display Setup Software, the display can be conveniently configured on the PC. The Can Bus protocol can be customised, you can import DBC files and design the displays with your own widgets.The log viewer downloads log files from the display. These can then be viewed and values can be individually selected and scaled.An in-built Can Bus logger allows you to take a close look at the log. This can be used to reverse-engineer unknown Can Buses.

The Y-pipe/Downpipe Kit is suitable for:Subaru WRX STI 2.5 Turbo 221KW/300hp (2007-2013) Discover the next level of performance enhancement for your 2007-2018 Subaru WRX STI with our state of the art Y-pipe/Downpipe Kit. Developed from high quality cast stainless steel 1.4301 (SS304), this kit offers a range of benefits that will take your driving performance to a new level. Technical specifications:High quality cast stainless steel: Manufactured from premium cast stainless steel 1.4301 (SS304) for maximum durability and corrosion resistance.Diameter: Complete with a Ø76mm (3) diameter for optimized performance and flow.CAD-designed and flow-optimized: Through precise CAD designs and flow optimization, the Y-pipe kit ensures optimal flow dynamics for maximum performance.Lambda probe connection: Equipped with a lambda probe connection for precise exhaust gas measurements and efficient performance optimization.Racing metal catalytic converter: Contains a high-quality racing metal catalytic converter (300 CPSI with EU6 coating) for optimum emission control and performance.Easy installation: 100% perfect fit, easy to replace with the standard part, without complex modifications.Reduced thermal load: Minimizes the thermal load on the turbocharger, which increases service life and optimizes performance.Increased performance: A noticeable increase in performance is achieved by reducing back pressure, resulting in significantly improved torque.Optional downpipe replacement: Optional Ø76mm (3) downpipe replacement for additional flexibility and power adjustment. This Y-pipe/downpipe kit stands for quality, performance and innovation. Transform your driving experience and experience the incomparable performance of your Subaru. Discover the future of performance enhancement with our Y-pipe/downpipe kit - perfectly matched to your Subaru WRX STI 2007-2018.Attention: Not approved in the area of the StVZO.