A powerful brake is one of the most important components in motorsport. With these upgrade kits, the necessary balance of performance, weight and durability has been perfectly combined through the uncompromising selection of materials, so that this product can meet the high demands of extreme automotive applications. To achieve this, MOV'IT has increased the diameter and thickness of the brake discs and used more cross holes. Each pre-cast hole is re-drilled and countersunk to achieve a more favourable flow. The brake disc's optimised DDE ventilation system has an 80% larger surface area compared to other brake discs, resulting in a significant reduction in temperature and wear. Attention: The conversion means that only rims with at least 19 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. Bundle Street 1: - Upgrade kit front axle, 380mm, 2-piece disc, perforated - incl. parts certificate Bundle Street 2 (+ sports brake pads): - Upgrade kit front axle, 380mm, 2-piece disc, perforated - 4S4 Sport brake pads - incl. parts certificate Street 3 bundle (+ sports brake pads + steel flex lines): - Upgrade kit front axle, 380mm, 2-piece disc, perforated - 4S4 Sport brake pads - Steel flex lines for front and rear axle - incl. parts certificate Details:MOVIT steel brake discs, 2-piece- Highly efficient DDE cooling system- Maximum fading protection- Double, directional ventilation- Perforated for optimum response behaviour even on wet roads- Special alloy for high thermal conductivityMOVIT sports brake pads, front axle- For the original brake caliper- Optimally compatible with MOVIT brake discs- Enlarged friction surface- Even heat transfer- Longer service life- With road approval- Low noise development- Lower system temperature for the perfect friction coefficientMOVIT steel flex lines, front and rear axle- Better response behaviour of the brake system- Durable quality (does not become porous and therefore does not leak)- Brake line does not expand under pressure- Harder and more constant pressure point- Improved modulation Scope of delivery: - 2x brake disc perforated left/right incl. brake pot - 1x mounting material - 1x installation instructions and running-in instructions - 1x parts certificate - 2x sports brake pad (only bundle 2+3) - 2x steel flex lines VA + HA (only bundle 3) Compatible vehicles:Audi A3 (8P) RS3 quattro 250kW / 340PS / 2480cm³Audi TT (8J) TTRS quattro 250kW / 340PS / 2480cm³Audi TT (8J) TTRS quattro plus 265kW / 360PS / 2480cm³ Notes:When installing the upgrade kit, we always recommend replacing the brake pads, as the use of used pads on new brake discs is not recommended.When installed in our factory, the conversion is carried out exclusively with new brake pads!

The Wagner Tuning Competition Gen.2 Intercooler Upgrade Kit EVO 1 fits the following vehicles:Audi TTRS 8J 250KW/340PS (2009-2014)Audi TTRS plus 8J 265KW/360PS (2009-2014)Audi RS3 8P Sportback 250KW/340PS (2011-2013) Immerse yourself in the future of performance: Our competition high-performance intercooler kit for the Audi RS3 8P! Experience ultimate performance and breathtaking cooling with our Competition High Performance Intercooler Kit, tailor-made for the Audi RS3 8P. This kit sets new standards in terms of performance and takes your driving experience to unimagined heights. Our high-performance intercooler impresses with its extended mesh dimensions (535mm x 160mm x 110mm), which results in a 40% larger charge air volume compared to the original cooler. The newly developed competition high-performance mesh is based on the latest tube-fin technology and guarantees maximum cooling efficiency. Despite its enormous performance, our intercooler is surprisingly light, weighing just 6.7 kg. The CAD-developed free-form end boxes made of cast aluminium ensure the best possible internal air flow and minimize back pressure compared to the standard cooler. Installation is extremely simple: plug & play by replacing the OEM charge air cooler. Your original charge air hoses can still be used, making installation even easier. Our intercooler is not only designed for optimum cooling, but also for durability. The anti-corrosion coating with heat conduction properties guarantees durable, efficient cooling over long periods of time. All our products, including this Competition high-performance intercooler kit, are subject to rigorous quality control. We focus on durability and top performance so you can conquer the roads with confidence. Ready to take your vehicle to the next level? Order our Competition high performance intercooler kit now and feel the difference on every ride. Your drive, our passion - together on the road to ultimate performance. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 40% larger charge air volume- flow-optimized- less back pressure- Plug & Play Scope of delivery:1 intercooler1 installation instruction Attention: Not approved in the area of the StVZO.

The Wagner Tuning Competition Intercooler Kit EVO 2 is suitable for:Audi TTRS 8J 250KW/340hp (2009-2014)Audi TTRS plus 8J 265KW/360hp (2009-2014) The Wagner Tuning intercooler upgrade kit EVO 2 for Audi TTRS 8J Discover the ultimate performance with our Wagner Tuning Evo 2 Competition intercooler for the Audi TTRS 8J! Would you like to raise your vehicle to a new level of performance? Our Evo 2 Competition intercooler is the answer for anyone looking for maximum performance and quality. With impressive mesh dimensions of 535 mm x 260 mm x 95 mm, this cooler not only offers an astonishing 62.5% larger flow area, but also a massive 94% increase in charge air volume compared to the original intercooler. The secret of our Evo 2 intercooler lies in the innovative Competition high performance mesh. Developed to not only provide superior cooling, but also to ensure sufficient airflow to the adjacent components. Thanks to high-quality cast aluminum, the end boxes are lightweight yet extremely robust. Each radiator has been carefully optimized in the CAD system to ensure the perfect airflow. This intercooler is not just an upgrade, but a statement. It is tailor-made for racing and offers not only outstanding cooling properties, but also a stable unit with the original cross member of your vehicle. Despite its powerful features, it weighs less than 10 kg, making it lighter than many other radiators on the market. Installation is child's play. Thanks to the 1:1 replacement, you can install it at the original mounting points. Feel the improved performance and optimized cooling of the supercharged air as you dominate the roads. Ready for the ultimate riding experience? Order your Evo 2 Competition intercooler for the Audi TTRS 8J now and unleash the true power of your vehicle. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 62.5% larger inflow area- 94% more charge air volume- flow-optimized- Plug & Play Scope of delivery:1 intercooler together with the crossbar1 set of license plate holdersAttention: Not approved in the area of the StVZO.

The Wagner Tuning Competition intercooler kit EVO 2 is suitable for:Audi TTRS 8J 250KW/340hp (2009-2014)Audi TTRS plus 8J 265KW/360hp(2009-2014) The Competition intercooler kit EVO 3 (not EVO 3.X!) for Audi TTRS 8J is now available with parts certificate and in two different mesh variants! Important: We recommend using the standard version for power classes up to 600 hp and the X version for power classes from 600 hp.The new EVO 3.X mesh version was developed in cooperation with a renowned Audi tuner and is suitable for higher power increases from 600 hp. The size of the intercooler remains unchanged from the standard version. Only the inner mesh structure has been further optimized for the high performance classes and adapted to the conditions. The EVO 3.X therefore ensures optimum charge air flow with very good cooling performance. For all power classes below 600 hp, we still recommend using the standard version.The high-performance intercooler has the following net dimensions (515mm x 367[274]mm x 95mm) and thus offers a 120% larger airflow area and 142% more charge air volume compared to the original intercooler. The newly developed competition high-performance mesh ensures sufficient airflow to the adjacent components, such as the water cooler, and is also very light. The end boxes of the intercooler are made of cast aluminium and have been optimized using flow analyses in the CAD system. Integrated air baffles at the inlet ensure that the charge air cooler is filled evenly. The result is excellent cooling properties with minimal back pressure. This kit is therefore just right for racing. The intercooler and the original crossbar form a stable unit and weigh only 11.2 kg thanks to the new competition high-performance mesh. It is fitted to the original mounting points and is easy to install (1:1 replacement). Optimum cooling of the supercharged air with a significant increase in performance! The connection diameter is 68mm on both sides. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 120% larger inflow area- 142% more charge air volume- flow-optimized- less back pressure- Connection diameter 68mm on both sides- Plug & Play OEM intercooler: cooling surface 856cm² / charge air volume 6.8LWT EVO 1 Performance: cooling surface 856cm² / charge air volume 9.4LWT EVO 2 Competition: Cooling surface 1391cm² / charge air volume 13.2LWT EVO 3 Competition: Cooling surface 1890cm² / charge air volume 16.5L All our products are subject to constant quality control. Scope of delivery:1 intercooler together with the crossbar1 mounting material1 set of license plate holders1 set of installation instructions EVO 3: With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO). EVO 3.X: Attention: Not approved in the area of the StVZO.

The Wagner Tuning Competition intercooler kit for the VAG 2.0TFSI / TSI engine is suitable for the following vehicles:Audi A3 8P 1,8 TFSI 118KW/160hp (2007-2012) / except convertible models with original intake!Audi A3 8P 2,0 TFSI 147KW/200hp (2004-2012) / except convertible models with original intake!Audi S3 8P 195KW/265hp (2006-2012)Audi TT 8J 1.8 TSI 118KW/160hp (2008-2014)Audi TT 8J 2.0 TFSI 147-155KW/200-211hp (2006-2014) (not MKB. CETA; CESA)Audi TTS 8J 200KW/272hp (2008-2014) (not MKB. CETA; CESA)Seat Leon 1P 1.8 TFSI 118KW/160hp (2009-2012)*Seat Leon 1P 2.0 TFSI 136KW/185hp (2005-2006)*Seat Leon 1P FR 147KW/200hp (2006-2009)*Seat Leon 1P FR 155KW/211hp (2009-2012)*Seat Leon 1P Cupra 177KW/241hp (2007-2011)*Seat Leon 1P Cupra R 195KW/265hp (2009-2012)*Seat Leon 1P Copa Edition 210KW/286hp (2008)*Seat Leon 1P Cupra R310 LE 228KW/310hp (2009-2012)*Seat Leon 1P Cupra R310 WCE 228KW/310hp (2009-2012)*Skoda Octavia 1Z 1,8 TSI 118KW/160hp (2008-2013)Skoda Octavia 1Z MK2 RS 147KW/200hp (2005-2009)Skoda Octavia 1Z MK2 RS 155KW/211hp (2009-2013)Skoda Superb 3T 2.0 TSI 147KW/200hp (2010-2013)Volkswagen Golf 5 GTI (incl. ED 30) 147-169KW/200-230hp (2004-2008)Volkswagen Golf 6 GTI (incl. ED 35) (Convertible) 155-173KW/211-235hp (2009-2013) (USA - does not fit vehicles with engine code CBFA 2011+)Volkswagen Golf 6 R (incl. convertible) 199KW/270hp (2009-2013)Volkswagen Beetle 2.0 TSI 147-162KW/200-220hp (2011-2016)Volkswagen EOS 2.0 TFSI 147KW/200hp (2006-2009)Volkswagen EOS 2.0 TFSI 155KW/211hp (2009-2014)Volkswagen Scirocco 3 2.0 TSI 147-162KW/200-220hp (2008-2015) (EA888 Gen1. - Gen3.)Volkswagen Scirocco 3 R 195-206KW/265-280hp (2009-2015) (EA888 Gen1. - Gen3.)Volkswagen Jetta 5 2.0 TFSI 147KW/200hp (2005-2010)Volkswagen Jetta 6 2.0 TSI 147-155KW/200-211hp (2010-2014)Volkswagen Passat B6 1.8 TSI 118KW/160hp (2007-2010)Volkswagen Passat B6 2.0 TSI 147KW/200hp (2005-2010)Volkswagen Passat B7 1.8 TSI 118KW/160hp (2010-2012)Volkswagen Passat B7 2.0 TSI 155KW/211hp (2010-2014)Volkswagen Passat CC 1.8 TSI 118KW/160hp (2008-2012)Volkswagen Passat CC 2.0 TFSI 147KW/200hp (2008-2010)Volkswagen Passat CC 2.0 TSI 155KW/211hp (2010-2014) * Slight modifications to the vehicle required Performance enhancement in perfection: The Competition Gen.2 intercooler for the Audi S3 8P 2.0T(F)SI models of the 1st & 2nd generation Our latest masterpiece, the Competition Gen.2 intercooler, catapults your vehicle to a new level of performance. With its impressive net dimensions (610mm x 440mm x 65mm / 17.45L), this cooler offers an astonishing 10% larger flow area and an incredible 50% more charge air volume compared to the original Audi S3 intercooler. This means your engine gets more air to breathe optimally for improved performance. At the heart of this intercooler is our ground-breaking Competition high-performance mesh. Developed using the latest CAD technology and special cast aluminium air deflectors, it ensures optimum internal air distribution. This not only minimises back pressure, but also increases cooling to a maximum. Your engine is cooled more efficiently, resulting in a significant increase in performance. The CNC-machined hose connections with a diameter of Ø67mm are supplied with matching silicone hoses to ensure a smooth air flow. Installation is extremely simple, as the Competition Gen.2 intercooler is replaced directly with the OEM intercooler. Not only is this kit easy to install, it is also available with a TÜV parts certificate for many vehicles, confirming its reliability and safety. In addition to its impressive performance, our intercooler has a high-quality anti-corrosion coating with excellent heat conduction properties. This guarantees not only long-term use, but also optimum cooling under all conditions. Your quest for ultimate performance culminates here. Step into a world where performance, quality and innovation meet. The Competition Gen.2 intercooler - your first choice for an unrivalled driving experience. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 10% larger inflow area- 50% more charge air volume- Ø67mm diameter hose connections- minimised back pressure Scope of delivery:1 intercooler2 silicone hoses4 hose clamps1 aluminium adapter1 assembly instruction1 parts certificate With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

The Wagner Tuning silicone hose kit is suitable for the following vehicles:Audi A3 8P 1,8 TFSI 118KW/160hp (2007-2012) / except convertible models with original intake!Audi A3 8P 2,0 TFSI 147KW/200hp (2004-2012) / except convertible models with original intake!Audi S3 8P 195KW/265hp (2006-2012)Audi TT 8J 1.8 TSI 118KW/160hp (2008-2014)Audi TT 8J 2.0 TFSI 147-155KW/200-211hp (2006-2014) (not MKB. CETA; CESA)Audi TTS 8J 200KW/272hp (2008-2014) (not MKB. CETA; CESA)Seat Leon 1P 1.8 TFSI 118KW/160hp (2009-2012)*Seat Leon 1P 2.0 TFSI 136KW/185hp (2005-2006)*Seat Leon 1P FR 147KW/200hp (2006-2009)*Seat Leon 1P FR 155KW/211hp (2009-2012)*Seat Leon 1P Cupra 177KW/241hp (2007-2011)*Seat Leon 1P Cupra R 195KW/265hp (2009-2012)*Seat Leon 1P Copa Edition 210KW/286hp (2008)*Seat Leon 1P Cupra R310 LE 228KW/310hp (2009-2012)*Seat Leon 1P Cupra R310 WCE 228KW/310hp (2009-2012)*Skoda Octavia 1Z 1,8 TSI 118KW/160hp (2008-2013)Skoda Octavia 1Z MK2 RS 147KW/200hp (2005-2009)Skoda Octavia 1Z MK2 RS 155KW/211hp (2009-2013)Skoda Superb 3T 2.0 TSI 147KW/200hp (2010-2013)Volkswagen Golf 5 GTI (incl. ED 30) 147-169KW/200-230hp (2004-2008)Volkswagen Golf 6 GTI (incl. ED 35) (Convertible) 155-173KW/211-235hp (2009-2013) (USA - does not fit vehicles with engine code CBFA 2011+)Volkswagen Golf 6 R (incl. convertible) 199KW/270hp (2009-2013)Volkswagen Beetle 2.0 TSI 147-162KW/200-220hp (2011-2016) Volkswagen EOS 2.0 TFSI 147KW/200hp (2006-2009)Volkswagen EOS 2.0 TFSI 155KW/211hp (2009-2014)Volkswagen Scirocco 3 2.0 TSI 147-162KW/200-220hp (2008-2015) (EA888 Gen1. - Gen3.)Volkswagen Scirocco 3 R 195-206KW/265-280hp (2009-2015) (EA888 Gen1. - Gen3.)Volkswagen Jetta 5 2.0 TFSI 147KW/200hp (2005-2010)Volkswagen Jetta 6 2.0 TSI 147-155KW/200-211hp (2010-2014)Volkswagen Passat B6 1.8 TSI 118KW/160hp (2007-2010)Volkswagen Passat B6 2.0 TSI 147KW/200hp (2005-2010)Volkswagen Passat B7 1.8 TSI 118KW/160hp (2010-2012)Volkswagen Passat B7 2.0 TSI 155KW/211hp (2010-2014)Volkswagen Passat CC 1.8 TSI 118KW/160hp (2008-2012)Volkswagen Passat CC 2.0 TFSI 147KW/200hp (2008-2010)Volkswagen Passat CC 2.0 TSI 155KW/211hp (2010-2014) Optimize the performance and reliability of your VAG 2.0TFSI / TSI engine with the high-quality silicone hose kit from WAGNER Tuning. This kit offers a first-class solution for improving charge air cooling and performance. Scope of delivery:2 silicone hoses4 hose clamps1 aluminum/plastic adapter Compatibility:The silicone hose kit is exclusively compatible with the Wagner Tuning intercooler and ensures a perfect fit and optimum performance for VAG 2.0TFSI / TSI vehicles. High-quality material: The silicone hoses are made of high-quality material that offers excellent heat and pressure resistance to ensure long-term durability.Improved performance: The optimized airflow improves the cooling performance of the engine, resulting in increased power and a more responsive driving experience.Easy installation: The kit comes with all the necessary hose clamps and an aluminum adapter and is simple and straightforward to install. No complicated modifications required.Optimum design: The kit is specially designed to meet the requirements of vehicles with an aluminum turbo outlet and offers a perfect fit and optimum performance. Note: The item image is for illustrative purposes only. The actual shape of the product may vary slightly.