Free shipping
info@aulitzkytuning.de
+49 (0)9874 6891630

Air filter | fits BMW M5/M8 incl. Competition/CS (F90/G90/G99/F91/F92/F93) S63 S68 | Aulitzky Tuning

€149.90*

Delivery time: Immediately available: approx. 1-3 working days*

place a request
Product number: ATFILTM5F90
Product information "Air filter | fits BMW M5/M8 incl. Competition/CS (F90/G90/G99/F91/F92/F93) S63 S68 | Aulitzky Tuning"

Here you get an original TitanTec sports air filter with all its advantages:
- higher air flow rate
- higher filter performance (even smaller particles are filtered)
- The particles are trapped in the filter after intake and thus remain trapped until cleaning.
- Washable and reusable filter
- Increased air flow and therefore better combustion in the engine
- No reduction in air flow over a minimum of 50,000 km
- Sufficient air even at high engine speeds
- more power
- Better intake noise
- Reduced fuel consumption

Only TitanTec sports air filters use polyurethane as the edge material. Polyurethane is more resistant to petrol, vapours and the like.
It has an ideal remoulding. This ensures that the edge of the filter is 100% sealed even when it is reinserted after cleaning.

The edge surface is made from a single mould.
With many other makes, pores in the edge material and joining surfaces where the edge is joined together often lead to a crack in the edge, which can result in unclean air being sucked into the engine.

With paper filters, the air flow rate is significantly lower and decreases further after just a short period of use.
In addition, paper filters must be disposed of after the specified mileage.
TitanTec sports air filters last a lifetime. This is good for the environment and your wallet.
Compared to TitanTec sports air filters, other washable cotton filters only filter much larger particles.

Cleaning the filters:
A TitanTec sports air filter has no oil residue and has 100% of its original performance again after cleaning.
Cleaning is quick and easy.
We recommend cleaning after 15,000-20,000 kilometres or once a year at the latest.
The best time to clean the air filter is around the end of May or beginning of June, i.e. after the pollen count, as this is the time when the air filter is under the most strain.
Under no circumstances should aggressive cleaning agents such as petroleum ether, cleaning petrol, brake cleaner etc. be used, as this can damage the material.

Details:
1x set of panel filters (right/left)
Length: 264 mm
Width: 215 mm

Compatible vehicles:
BMW M5 (F90) 600 hp, 441 kW, 09/17 to 06/23
BMW M5 (F90) M5 Competition, 625 hp, 460 kW, 07/18 to 06/23
BMW M5 (F90) M5 CS, 635 hp, 467 kW, 03/21 to 02/22
BMW M5 (G90) M5 plug-in hybrid all-wheel drive, 727 hp, 535 kW, from 07/24
BMW M5 Touring (G99) M 5 plug-in hybrid all-wheel drive, 727 hp, 535 kW, from 10/24
BMW M8 Coupe (F92) M8, 600 hp, 441 kW, from 07/19
BMW M8 Coupe (F92) M8 Competition, 625 hp, 460 kW, from 07/19
BMW M8 Gran Coupe (F93) M8, 600 hp, 441 kW, from 11/19
BMW M8 Gran Coupe (F93) M8 Competition, 625 hp, 460 kW, from 11/19
BMW M8 Convertible (F91) M8, 600 hp, 441 kW, from 07/19
BMW M8 Convertible (F91) M8 Competition, 625 hp, 460 kW, from 07/19

Note: This is NOT an original BMW product!

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Zuletzt gesehene Produkte

Zuletzt gesehene Produkte

Connecting rod bearing change | for BMW Z4M (E85/E86) 343hp S54
Includes the following services: - Removing and replacing the connecting rod bearings - Check and measure crankshaft journals - Check and adjust the oil pump - Clean all parts - Wheel alignment - Oil & filter change - incl. all parts such as bearings, screws, seals, oil filter and engine oil (10W60) - Entry in the service booklet with BMW registration number stamp - 1 litre oil refill In addition, and depending on requirements, we can also replace the spark plugs and engine mounts for an additional charge. Please note: This service can only be carried out at our company headquarters!

€1,349.00*
Connecting rod bearing change | for BMW M5 (E60/E61) 507hp S85
Includes the following services: - Removing and replacing the connecting rod bearings - Check and measure crankshaft journals - Check and adjust the oil pump - Clean all parts - Wheel alignment - Oil & filter change - incl. all parts such as bearings, screws, seals, oil filter and engine oil (10W60) - Entry in the service booklet with BMW registration number stamp - 1 litre oil refill In addition, and depending on requirements, we can also replace the spark plugs and engine mounts for an additional charge. Please note: This service can only be carried out at our company headquarters!

€2,749.00*
DKG transmission oil cooler | fits BMW M3/M4 incl. Competition/CS/GTS (F80/F82/F83) S55 | CSF Race
CSF Race F8X - DKG Transmission Oil Cooler Manufactured with CSF's AC condenser technology using a 1-row super high pressure 26mm multi-channel microtube. Dual-pass high performance core with 10 cooling tubes, compared to the OEM single-pass with 6-tube design for the return line. High-density multi-fin fin design.“Drop-in fit” requires no adjustments during installationAll OEM components are reused, including oil line connections, mounting brackets and shroudLab tested to be ~30% more efficient than the OEM coolerThe world's first and only “plug-and-play” improved DCT transmission cooler for the BMW S55 engine in the BMW F8x M3 M4 Compatible vehicles:BMW 3 (F30, F80) M3 2014-2018BMW 3 (F30, F80) M3 CS 2018-2018BMW 3 (F30, F80) M3 Competition 2016-2018BMW 4 Convertible (F33, F83) M4 2014-2020BMW 4 Convertible (F33, F83) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 2014-2020BMW 4 Coupe (F32, F82) M4 CS 2017-2019BMW 4 Coupe (F32, F82) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 GTS 2016-2019

€666.40*