Rear spoiler Carbon | fits BMW 5 Series/ M5 incl. Competition (G30/F90)

Air filter | fits BMW M5/M8 incl. Competition/CS (F90/G90/G99/F91/F92/F93) S63 | Aulitzky Tuning

Here you get an original TitanTec sports air filter with all its advantages:- higher air flow rate- higher filter performance (even smaller particles are filtered)- The particles are trapped in the filter after intake and thus remain trapped until cleaning.- Washable and reusable filter- Increased air flow and therefore better combustion in the engine- No reduction in air flow over a minimum of 50,000 km- Sufficient air even at high engine speeds- more power- Better intake noise- Reduced fuel consumption Only TitanTec sports air filters use polyurethane as the edge material. Polyurethane is more resistant to petrol, vapours and the like. It has an ideal remoulding. This ensures that the edge of the filter is 100% sealed even when it is reinserted after cleaning. The edge surface is made from a single mould. With many other makes, pores in the edge material and joining surfaces where the edge is joined together often lead to a crack in the edge, which can result in unclean air being sucked into the engine. With paper filters, the air flow rate is significantly lower and decreases further after just a short period of use.In addition, paper filters must be disposed of after the specified mileage. TitanTec sports air filters last a lifetime. This is good for the environment and your wallet.Compared to TitanTec sports air filters, other washable cotton filters only filter much larger particles. Cleaning the filters:A TitanTec sports air filter has no oil residue and has 100% of its original performance again after cleaning.Cleaning is quick and easy.We recommend cleaning after 15,000-20,000 kilometres or once a year at the latest.The best time to clean the air filter is around the end of May or beginning of June, i.e. after the pollen count, as this is the time when the air filter is under the most strain.Under no circumstances should aggressive cleaning agents such as petroleum ether, cleaning petrol, brake cleaner etc. be used, as this can damage the material. Details: 1x set of panel filters (right/left) Length: 264 mm Width: 215 mm Compatible vehicles:BMW M5 (F90) 600 hp, 441 kW, 09/17 to 06/23 BMW M5 (F90) M5 Competition, 625 hp, 460 kW, 07/18 to 06/23 BMW M5 (F90) M5 CS, 635 hp, 467 kW, 03/21 to 02/22 BMW M5 (G90) M5 plug-in hybrid all-wheel drive, 727 hp, 535 kW, from 07/24 BMW M5 Touring (G99) M 5 plug-in hybrid all-wheel drive, 727 hp, 535 kW, from 10/24 BMW M8 Coupe (F92) M8, 600 hp, 441 kW, from 07/19 BMW M8 Coupe (F92) M8 Competition, 625 hp, 460 kW, from 07/19 BMW M8 Gran Coupe (F93) M8, 600 hp, 441 kW, from 11/19 BMW M8 Gran Coupe (F93) M8 Competition, 625 hp, 460 kW, from 11/19 BMW M8 Convertible (F91) M8, 600 hp, 441 kW, from 07/19 BMW M8 Convertible (F91) M8 Competition, 625 hp, 460 kW, from 07/19Note: This is NOT an original BMW product!

€149.90*

Aulitzky Exhaust | Cat replacement pipes | BMW M5 (F90) nonOPF 600hp S63

Zur Montage am Turbolader / ersetzt die Haupt-Katalysatoren. Ohne Zulassung im Bereich der StVZO. Kompatible Fahrzeuge:FahrzeugTypLeistungHubraumMotorBaujahr BMW 5er (F90)M5 441kW / 600PS4395cm³S63 B44 B09.17 - Hinweis: Je nach Softwarestand kann es zum Aufleuchten der Motorkontrollleuchte kommen. Hier empfehlen wir eine Softwareanpassung. *ACHTUNG! Katersatzrohre mit der Kennzeichnung "ohne Zulassung" sind nicht für die Nutzung im öffentlichen Straßenverkehr zulässig und nur für Rennsportzwecke gedacht! Sofern Sie dennoch ein Produkt ohne Zulassung in Ihrem Fahrzeug verbauen und dieses im Bereich der StVZO nutzen, machen Sie sich strafbar. Mögliche Konsequenzen, die Sie in diesem Fall erwarten können: Erlöschen der Betriebserlaubnis nach §19 der StVZO und eine evtl. daraus resultierende Stilllegung des Fahrzeugs. Weitere Mögliche Konsequenzen, wie z.B. eine Anzeige wegen Steuerhinterziehung, sowie eventuelle Ermittlungen seitens der Umweltbehörde liegen im Ermessen der Ermittler.

€1,218.95*

Aulitzky Exhaust | Downpipe 3" (76mm) with sports catalytic converter | BMW M5 (F90) 600PS S63 | Motorsport articles

Facts: - replaces the main catalytic converter - with 200-cell stainless steel sports catalytic converter - Euro 6 compatible - for non-OPF vehicles - optionally with thermal insulation (with surcharge) - without approval in the area of the StVZO Compatible vehicles:VehicleVehicle typePower outputcubic capacityEngineYear of construction BMW 5 Series (F90)M5 441kW / 600PS4395ccS63 B44 B09.17 - Note: Depending on the software version, the engine control light may light up. We recommend adapting the software in this case.

€4,440.00*

Aulitzky Exhaust | ECE downpipe with 4x sports catalytic converter | BMW M5/M8/X5M/X6M incl. Competition/CS (F90/F92/F95/F96) S63

Facts: - replaces the main catalytic converter - with 4x stainless steel sports catalytic converter - Euro 6 compatible - optionally with Thermo-Integral insulation (with surcharge) - with ECE approval*Compatible vehicles:VehicleVehicle typePower outputEngine capacityEngineYear of construction from BMW 5 Series (F90)M5 441kW / 600PS4395ccS63 B44 B06.21 - BMW 5 Series (F90)M5 Competition460kW / 625PS4395cm³S63 B44 B06.21 - BMW 5 Series (F90)M5 CS467kW / 635PS4395ccS63 B44 B06.21 - BMW 8 Series (F92)M8 441kW / 600PS4395cm³S63 B44 B06.21 - BMW 8 Series (F92)M8 Competition460kW / 625PS4395cm³S63 B44 B06.21 - BMW X5 (F95)M441kW / 600PS4395cm³S63 B44 B06.21 - BMW X5 (F95)M Competition460kW / 625PS4395cm³S63 B44 B06.21 - BMW X6 (F96)M441kW / 600PS4395cm³S63 B44 B06.21 - BMW X6 (F96)M Competition460kW / 625PS4395cm³S63 B44 B06.21 - Note: Depending on the software version, the engine control light may light up. We recommend adapting the software in this case.Suitable for OE article number: 18328088820 Catalytic converter cyl. 1-4 18328088821 Catalytic converter cyl. 5-8 18329504708 Catalytic converter bottom cyl. 1-4 18329504709 Catalytic converter cyl. 5-8 *This downpipe has ECE approval so that it can be used within the scope of the StVZO without registration in the vehicle documents.

€5,190.00*

Aulitzky Exhaust | ECE exhaust system from catalytic converter/OPF with flap control | BMW M5/M8 incl. Competition/CS (F90/F92) S63

OPF: Fahrzeug ohne OPF | Oberfläche: gestrahlt (Glasperlen)

Facts: - Exhaust flaps with ceramic bearings - Electric flaps - Plug & Play driveable with original exhaust system - Approval/installation possible in conjunction with our downpipe - Cat/OPF back system - Made in Germany (Lake Constance) - with/without ECE approval (depending on choice of flap control)* Compatible vehicles:VehicleTypePower outputDisplacementEngineYear of construction BMW 5 Series (F90)M5 441kW / 600PS4395ccS63 B44 B09.17 - BMW 5 Series (F90)M5 Competition460kW / 625PS4395cm³S63 B44 B07.18 - BMW 5 Series (F90)M5 CS467kW / 635PS4395cm³S63 B44 B03.21 - BMW 8 Series (F92)M8 441kW / 600PS4395cm³S63 B44 B07.19 - BMW 8 Series (F92)M8 Competition460kW / 625PS4395cm³S63 B44 B07.19 - *ATTENTION! In conjunction with the standard or ECE flap control system (with type approval), this flap exhaust system has ECE approval so that it can be used legally within the scope of the StVZO without registration in the vehicle documents.The use of flap exhaust systems in conjunction with the race flap control (without approval) is not permitted for use on public roads and is only intended for racing purposes! If you nevertheless install a product without approval in your vehicle and use it within the scope of the StVZO, you are liable to prosecution. Possible consequences that you can expect in this case: Expiry of the operating licence in accordance with §19 of the StVZO and possible resulting immobilisation of the vehicle. Other possible consequences, such as a charge of tax evasion, as well as possible investigations by the environmental authorities are at the discretion of the investigators.

Variants from €3,899.00*

€4,199.00*

Aulitzky Exhaust | Race flap control module | BMW M5 incl. Competition/CS (F90) S63

Funktion: - variable Klappensteuerung der originalen oder nachgerüsteten Klappenabgasanlage - über Lenkradtasten steuerbar Kompatible Fahrzeuge:FahrzeugTypLeistungHubraumMotorBaujahr BMW 5er (F90)M5 441kW / 600PS4395cm³S63 B44 B09.17 - BMW 5er (F90)M5 Competition460kW / 625PS4395cm³S63 B44 B07.18 - BMW 5er (F90)M5 CS467kW / 635PS4395cm³S63 B44 B03.21 - Hinweis: Dieses Produkt ist NICHT in der StVZO zugelassen und NICHT für den Verkauf innerhalb der EU gedacht! Dieser Artikel dient ausschließlich für Show- & Motorsportzwecke und darf nicht im öffentlichen Straßenverkehr genutzt/verbaut werden. Sollte das Bauteil am/im Fahrzeug verbaut sein, erlischt die Betriebserlaubnis!Bei den abgebildeten Bildern handelt es sich um Beispielbilder.

€449.00*

Cold Air Intake System | fits BMW M5 incl. Competition/CS (F90) S63 | Blackboost

Transform your F90 into a high-performance powerhouse with the BlackBoost cooling air intake system. Experience more power, style and driving dynamics with this premium upgrade. In the world of performance modifications, the airbox is one of the most important engine components you should upgrade. The factory airbox is very restrictive in terms of airflow and filter area. Our cooling air intakes are designed and engineered to overcome these factory restrictions and deliver the maximum airflow with the lowest possible temperatures given the space available. The BlackBoost Cold Air Intakes are designed to be flush with the bonnet of the vehicle and ensure a consistent seal with the rubber seals of the airbox, whilst also ensuring a large surface area for our 10.92cm (4.3 inch) Twin Flow Conical Filters to work properly. The BlackBoost Twin Flow filters have been specifically designed to maximise airflow and surface area. With a diameter of 10.92 cm (4.3 inches) and a height of 20.32 cm (8 inches), they are guaranteed to provide the best airflow and protection. The airboxes are laser-cut aluminium panels with highly complex CNC bends, assembled with stainless steel fasteners and finished with a high-quality black powder coating. The BlackBoost intake kit is a plug-and-play solution that works perfectly without further customisation and requires no additional software tuning. It also works smoothly in combination with turbo upgrades, downpipes, methanol injections etc. to unleash the necessary airflow and utilise the full capacity of the machine for those aiming for 1000+ WHP figures. Scope of delivery:- Powder coated airbox- 2x 10.92 cm (4.3 inch) twin high flow dry filters- 2x BlackBoost CFD developed filter adapters- Personalised logo plate Key features:- Proven power increase from 8 to 30+ hp on production vehicles- Improved responsiveness across the entire rev range- Optimised airflow and increased volume range compared to standard equipment- Increased surface area of the filter elements- Can support airflow for 1000+ WHP configurations- Larger filter element surface area compared to OEM- Plug-and-play bolt-on installation- No ECU tuning required Compatible vehicles: BMW M5 (F90) 441kW/600hp 4395cc S63B44B (12.17 -10.23) BMW M5 (F90) Competition 460kW/625hp 4395cm³ S63B44B (07.18 - 10.23) BMW M5 (F90) CS 467kW/635hp 4395cm³ S63B44B (03.21 - 01.22)

€1,599.00*

Diffusor Carbon | fits BMW M5 incl. Competition (F90) S63 | 3DDesign

3DDesign Carbon Diffusor M5 F90 Variante: Diffusor einzeln

A high-end kit for a high-end car. The new F90 gets a new, innovative look. The new AERO body kit from 3DDesign for the F90 fits seamlessly into the familiar, discreetly aggressive race style of the 3DDesign lines. The iconic design is complemented by a perfect fit and the usual uncompromising quality. The real eye-catcher and centerpiece of the body kit - an carbon diffuser that is uncompromisingly and aggressively designed as a direct replacement part. The clear lines and curved shape fit perfectly into the image of the F90. Three inner fins not only ensure a racy look, but also optimum airflow. The F90 M5 carbon diffuser comes in two parts and can also be purchased separately. A performance diffuser for the F90, which is also a real visual upgrade! Pure luxury! Compatible vehicles:BMW 5 (G30, F90) M5 2017-2023BMW 5 (G30, F90) M5 Competition 2018-2023

Variants from €1,620.00*

€2,495.00*

Diffusor Competition Dry Carbon | fits BMW M5 incl. Competition (F90) S63 | AutoTecknic

Dry Carbon Competition diffuser for the rear center diffuser of the F90. Designed to mount directly to the factory lower mounting position for quick and easy installation. The rear diffuser features durable and precise plastic mounting positions and is manufactured using autoclave technology for ultimate lightweight, high durability and precise fitment. Compatible vehicles:BMW 5 (G30, F90) M5 2017-2023BMW 5 (G30, F90) M5 Competition 2018-2023

€932.00*

%

Eibach | Pro-Kit Performance lowering springs VA+HA 25mm | BMW M5 incl. Competition (F90) S63

Eibach Pro-Kit performance suspension springs for front and rear axle E10-20-041-01-22 The Eibach Pro-Kit lowering springs are the ideal solution for your vehicle, as the kit lowers the centre of gravity, reduces rebound when accelerating, reduces body roll when cornering and dips when braking. As a result, understeer and oversteer no longer occur. Lowering the vehicle with the Pro-Kit springs reduces the standard distance between the tyres and the wheel arch and gives the vehicle a sporty look. In addition, the handling of the vehicle is maximised. The Eibach Pro-Kits are designed by Eibach suspension engineers and test experts to deliver a combination of sporty looks and performance without compromising on safety or ride quality. - Developed and tested for combination with standard and aftermarket dampers- Component of the Eibach Pro system- Top performance handling- Lowers the vehicle's centre of gravity by up to 40 mm (depending on the vehicle)- Spring design for traction and attraction- Progressive suspension characteristics- Performance handling- ABE or parts certificate Note: Only for vehicles without levelling control. Information:- Lowering front axle: approx. 25mm- Lowering rear axle: approx. 20mm- Type of approval: with expert opinion- Illustration may differ from the original Compatible vehicles:- Axle load front axle: up to 1215kg- Axle load rear axle: up to 1260kg- EC type approval number: e1*2007/46*1688*..- Only for vehicles without levelling system BMW 5 (F90) M5 441kW / 600PS 7909-ABWBMW 5 (F90) M5 Competition 460kW / 625hp 7909-ABV

€425.00* €505.75* (15.97% saved)

Eventuri | Carbon Intake System | BMW M5/M8 (F90/F91/F92/F93) 600hp S63

Facts: Acceleration time: 60-130mph Reduced by 0.22 seconds Max. Flow rate per airbox at 28? H2O: Standard 620 CFM, Eventuri 736 CFM Material: Carbon Manufacturer: Eventuri Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) The F90 M5 Eventuri intake system has been developed through extensive real-world testing and airflow simulation analyses. Now in the updated V2 design, it features sealed filter housings to maintain a more stable IAT even when stationary. The new covers that seal the housings, in conjunction with our blade and shield combination, provide unrestricted airflow while maintaining low IATs through cold air saturation. Our large front air scoops channel ambient air directly into the intake area, ensuring that the engine does not suffer from heat soak. In addition, our gold-coloured, heat-reflecting shields have integrated flow guides that direct the ambient air from the blades into the filters. We have also managed to increase the cross-sectional area of the inlet pipe by over 30% compared to the standard inlet, as it passes through the openings in the struts. The Eventuri difference The F90 M5 Eventuri system uses our patented carbon fibre housings with our bespoke Gen 2 filters, providing an aerodynamically efficient airflow path from the filter to the turbos. Not just another cone filter with a heat shield, but a unique design that creates the Venturi effect and maintains laminar flow conditions to reduce turbo drag. Internal volume Another important design feature of the inlet housings is the internal volume of the tubes as they pass through the struts. On the F90 M5, the airbox system must pass through an oval opening in the strut brace on each side before reaching the turbo inlets. We have managed to increase the internal size of our inlets at this junction, resulting in more available volume for the turbos and therefore less restriction. The increase in cross-sectional area between the Eventuri and the standard airbox is 31% as follows: Inner cross-sectional area of the intake pipe at the strut brace: Standard airbox pipe = 6487 mm² Eventuri intake pipe = 8497 mm² Each intake system consists of: 2 x carbon fibre venturi housings with integrated pipes 2 x customised high-performance Generation 2 filters 2 x carbon fibre filter covers 2 x aluminium intake covers 2 x carbon fibre air scoops 2 x laser-cut heat shields, lined with gold heat reflective material 2 x laser-cut air ramps integrated into the heat shields High-quality silicone couplings and OEM hose clamps Parts certificate The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT BMW M5 e1*2007/46*1828*.. DE/AT BMW M5 Competition e1*2007/46*1828*.. DE/AT BMW M8 e1*2007/46*2019*.. DE/AT BMW M8 Competition e1*2007/46*2019*.. Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction BMW 5 Series (F90)M5 441kW / 600hp4395cm³S63 B44 B09.17 - BMW 8 Series (F91/F92/F93)M8 441kW / 600hp4395cm³S63 B44 B07.19 -

€2,547.00*

Eventuri | Carbon Turbo Inlet | BMW M5/M8 incl. Competition (F90/F91/F92/F93) S63

Facts: Acceleration time: 60-130 mph reduced by 0.12 seconds Material: Carbon Manufacturer: Eventuri Expertise: Parts certificate Suitable for F90 M5, F92 M8, also suitable for standard airboxes. We present the perfect addition to our F90 M5 intake system to optimise the flow path to the turbos. Our carbon inlets have a larger volume than the stock inlets by maintaining a larger diameter up to the turbos. The standard inlets narrow immediately after connection to the intake tract, which is a restriction, especially at higher boost pressures. We have eliminated this constriction and made the bend as smooth as possible so that the turbos reach maximum boost pressure earlier. During development, we also tested inlets with larger openings and redesigned the intake tract so that it has an oversized connection to the inlets. However, the tests did not reveal any further advantages, so we continued with this version, which allows us to use our current intake without any modification and at the same time achieve the best performance gains. The intake was tested on the road with Dragy to record acceleration from 60-130mph. The tests were carried out on the same track and on the same day to minimise the variables. The results show that acceleration times from 60-130mph have reduced by 0.12 seconds, which is a significant improvement at these speeds. Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction BMW 5 Series (F90)M5 441kW / 600hp4395cm³S63 B44 B09.17 - BMW 5 Series (F90)M5 Competition460kW / 625hp4395cm³S63 B44 B07.18 - BMW 8 Series (F91/F92/F93)M8 441kW / 600hp4395cm³S63 B44 B07.19 - BMW 8 Series (F91/F92/F93)M8 Competition460kW / 625hp4395cm³S63 B44 B07.19 -

€798.00*

Eventuri | Carbon Upgrade Air Ducts Shroud | BMW M5 (F90) 600hp S63

Facts:Material: CarbonManufacturer: EventuriExpert opinion: Parts certificate The upgrade air duct for the popular Eventuri F90 M5 Intake. The two screens made of prepreg carbon extend the air duct and now better shield the semi-open intake mushroom from the engine heat. A must for every F90 M5 Eventuri owner. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 5er (F90)M5 441kW / 600hp4395cm³S63 B44 B09.17 -

€387.00*

Front lip Carbon | fits BMW 5 Series/ M5 incl. Competition (G30/F90) | 3DDesign

A high-end kit for a high-end car. The new F90 gets a new, innovative look. The new AERO body kit from 3DDesign for the F90 fits seamlessly into the familiar, discreetly aggressive racing style of the 3DDesign lines. The iconic design is complemented by a perfect fit and the usual uncompromising quality. As with the F10, the front lip comes with a maximum amount of carbon fibre. Above the aggressive centreboard with aero lift slits, the lip extends into the air intakes on the right and left. A performance front lip for the F90 that is also a real visual upgrade! Pure luxury! Compatible vehicles:BMW 5 (G30, F90) 518 d 2018-2020BMW 5 (G30, F90) 518 d mild hybrid 2020-2023BMW 5 (G30, F90) 520 d 2016-2023BMW 5 (G30, F90) 520 d Mild-Hybrid 2019-2023BMW 5 (G30, F90) 520 d Mild-Hybrid xDrive 2019-2023BMW 5 (G30, F90) 520 d xDrive 2016-2023BMW 5 (G30, F90) 520 i 2017-2023BMW 5 (G30, F90) 520 i Mild-Hybrid 2020-2023BMW 5 (G30, F90) 525 d 2017-2019BMW 5 (G30, F90) 530 d 2016-2020BMW 5 (G30, F90) 530 d Mild-Hybrid 2020-2023BMW 5 (G30, F90) 530 d Mild-Hybrid xDrive 2020-2023BMW 5 (G30, F90) 530 d xDrive 2016-2020BMW 5 (G30, F90) 530 e Plug-in Hybrid 2017-2023BMW 5 (G30, F90) 530 e Plug-in Hybrid xDrive 2017-2023BMW 5 (G30, F90) 530 i 2016-2020BMW 5 (G30, F90) 530 i Mild-Hybrid 2020-2023BMW 5 (G30, F90) 530 i Mild-Hybrid xDrive 2020-2023BMW 5 (G30, F90) 530 i xDrive 2016-2023BMW 5 (G30, F90) 540 d Mild-Hybrid xDrive 2020-2023BMW 5 (G30, F90) 540 d xDrive 2017-2020BMW 5 (G30, F90) 540 i 2016-2020BMW 5 (G30, F90) 540 i Mild-Hybrid 2020-2023BMW 5 (G30, F90) 540 i Mild-Hybrid xDrive 2020-2023BMW 5 (G30, F90) 540 i xDrive 2016-2020BMW 5 (G30, F90) 545 e Plug-in Hybrid xDrive 2020-2023BMW 5 (G30, F90) M 550 d xDrive 2017-2020BMW 5 (G30, F90) M 550 i xDrive 2017-2023BMW 5 (G30, F90) M5 2017-2023BMW 5 (G30, F90) M5 Competition 2018-2023

€2,699.00*

Front lip Carbon | fits BMW M5 incl. Competition (F90) S63 | AutoTecknic

AutoTecknic's vision is to develop the most advanced, innovative and unique products on the market to meet the needs of the most demanding customers. The lightweight carbon fiber aerodynamic products are uniquely designed to enhance the original design of your vehicle. The central design philosophy "understand functional elegance" takes the sporty appearance of your vehicle to a new level. Quality products characterize the AutoTecknic brand. Every single part must pass strict quality controls before it reaches your vehicle. Customers expect nothing less than the best parts from AutoTecknic, so naturally we expect nothing less. AutoTecknic's autoclaved pre-preg carbon fiber structure gives the product superior stiffness, strength and durability compared to traditional handmade carbon fiber composites. AutoTecknic Dry Carbon Center Front Lip for the F90 is both highly visible and highly functional. Compatible vehicles:BMW 5 (G30, F90) M5 2017-2023BMW 5 (G30, F90) M5 Competition 2018-2023

€799.00*

Front lip Carbon | fits BMW M5 incl. Competition (F90) S63 | RKP

Designed, engineered and manufactured in the USA, the RKP carbon fibre front lip is a stylish accent on the front of any F90. Each front lip is handcrafted from 100% carbon fibre and composite materials inside and out. A perfect fit and easy installation were at the top of our list. Details:- Flawless fit- Extremely light and rigid- Clear lacquered and highly polished Compatible vehicles:BMW M5 441kW/600hpBMW M5 Competition 460kW/625hp The article has the following certificate: Material Expertise

€2,399.00*

Front splitter Performante Dry Carbon | fits BMW M5 incl. Competition (F90) S63 | AutoTecknic

Dry Carbon Performante Aero Splitter for the F90. Designed to seamlessly follow the curvature and mount directly onto the lower bumper mount for quick and easy installation. The Dry Carbon Aero Splitters are manufactured using signature autoclave technology with pre-preg 3K twill carbon fibre and finished with UV protected high gloss clear coat for the ultimate lightweight, durable and snug fitting splitters. The name Dry Carbon comes from the manufacturing process. Dry Carbon is formed by using a pre-preg or impregnated piece of carbon material. This piece of carbon is first placed in a mould and then placed in a sealed vacuum (autoclave) to cure properly. This particular method creates the least amount of waste and forms a lighter version of carbon than the wet method. The autoclave vacuum process for producing dry carbon means that fewer pinholes and virtually no air pockets form in the carbon. Dry carbon is the highest quality version of carbon products produced. AutoTecknic Dry Carbon Performante Aero Splitters are both highly visible and highly functional. Compatible vehicles:BMW 5 (G30, F90) M5 2017-2023BMW 5 (G30, F90) M5 Competition 2018-2023

€715.00*

H&R | Lowering springs 30/30mm / 20/20mm | BMW M5 Sedan incl. Competition (F90) | 28686-1

H&R lowering springs for BMW M5 Sedan/Competition Sedan (F90) 2018- VA20-30/HA20-30mm H&R sports spring kits are the ideal solution if you want to optimize the handling of your vehicle and achieve a sporty look while maintaining the standard driving comfort. Details:Lowering VA/HA Sedan: 30/30mmLowering VA/HA Competition Sedan: 20/20mmSuspension: for vehicles with electric damper controlType of approval: with general operating permit (ABE) Product advantages:Sporty look and performanceLowering of the vehicle's center of gravityLinear or progressive suspension characteristicsCan be combined with standard or retrofit dampersOptimized driving dynamicsSurface protection through powder coatingMade in Germany Compatible vehicles:BMW M5 Sedan F90 type F5LM only with adaptive damper control 2018- front axle 30mm / rear axle 30mmBMW M5 Competition Sedan F90 type F5LM, only with adaptive damper control 2018- front axle 20mm / rear axle 20mm

€524.00*

Intercooler | fits BMW M5/M8 incl. Competition/CS (F90/F91/F92/F93) S63 | CSF Race

The intercooler for F90 and F92 knows how to impress and will certainly not disappoint you. ColourThe intercooler comes in a classic, appealing black that matches any vehicle colour and rounds off the overall appearance of your car. InstallationThe installation of our intercooler is as simple as the original part. It's a direct replacement, which means you don't have to follow complicated instructions or buy additional parts. MaterialThe intercooler is made of robust and durable aluminium. This material is lightweight yet highly resistant to high temperatures, making it ideal for the requirements of an intercooler. Compatible vehicles:BMW 5 (G30, F90) M5 2017-2023BMW 5 (G30, F90) M5 CS 2021-2022BMW 5 (G30, F90) M5 Competition 2018-2023BMW 8 Convertible (G14, F91) M8 since 2019BMW 8 Convertible (G14, F91) M8 Competition Since 2019BMW 8 Coupe (G15, F92) M8 Since 2019BMW 8 Coupe (G15, F92) M8 Competition Since 2019BMW 8 Gran Coupe (G16, F93) M8 Since 2019BMW 8 Gran Coupe (G16, F93) M8 Competition Since 2019

€3,694.95*

KW | V4 Gewindefahrwerk | BMW M5 (F90/G30) inkl. Competition/CS | 3A7200CB | 3A7200CC

KW V4 Gewindefahrwerk - State of the Art Mit dem neuen KW V4 mit seinen Gewindefederbeinen aus Edelstahl oder Aluminium verleihen Sie Ihrem Supersportwagen die notwendigen Reserven, um die Fahrdynamik weiter zu steigern. Die dreifach einstellbaren High-Performance-Dämpfer mit ihrer unabhängigen Einstellung der Zugstufe sowie Lowspeed- und Highspeed-Druckstufendämpfung basiert auf die erfolgreiche Rennsporttechnologie des mehrfachen Gesamtsiegers das ADAC Zurich 24h-Rennen Nürburgring und verfügen je nach fahrzeugspezifischer Ausführung über Aluminiumstützlager. Das neue KW V4 wird ausschließlich für ausgewählte High-Performance-Fahrzeuge entwickelt, die durch unsere KW Fahrwerktechnologie im fahrdynamischen Grenzbereich sicherer bewegt werden können. - 3-fach einstellbare High-Performance-Dämpfer mit Gewindefederbeinen aus Edelstahl - Separate und unabhängige Dämpfereinstellung in: - Zugstufendämpfung mit 16 exakten Klicks + (straffer) / - (komfortabler) - Lowspeed-Druckstufendämpfung mit 6 exakten Klicks + (straffer) / - (komfortabler) - Highspeed-Druckstufendämpfung mit 14 exakten Klicks + (straffer) / - (komfortabler) - Zwei Grundabstimmungen ab Werk mit Komforteinstellung und Performanceeinstellung - Je nach Fahrzeug sind Aluminiumstützlager fester Bestandteil des Lieferumfangs Bitte beachten Sie die Auflagen und Hinweise zu diesem Produkt: - VA + HA höhenverstellbar (Gewindefederbeine) - Bei Fahrzeugen mit elektronischer Dämpferregelung muss diese stillgelegt werden. Fahrzeugspezifische KW Stilllegungssätze finden Sie in der Zubehörtabelle. - Dämpfer verfügen über leicht zu bedienende Einstellräder. Bauartbedingt in der Zugstufe nur bei zugänglicher Kolbenstange. - Variante 4 / Variante 5 Federbeine / Dämpfer aus Aluminium bzw. achsweise kombiniert aus Aluminium und Edelstahl Technische Infos: Tieferlegung VA/HA (mm): 15-30/10-30 Ausfuehrung: V4 Haerteverstellung: Zug- und Druckstufe Material: Aluminium Verstellung VA/HA: Gewinde/Gewinde Zulassung: Teilegutachten (§19.3) Kompatible Fahrzeuge: Hersteller Modell Ausführung Karosserie Kraftstoff Performance Hubraum Zylinder Antrieb BMW 5er (G30, F90) F5LM, G5L 09/2016- M5 Stufenheck Benzin 441 KW 4395 ccm 8 Allrad BMW 5er (G30, F90) F5LM, G5L 09/2016- M5 Competition Stufenheck Benzin 460 KW 4395 ccm 8 Allrad BMW 5er (G30, F90) F5LM, G5L 09/2016- M5 CS Stufenheck Benzin 467 KW 4395 ccm 8 Allrad

From €6,022.59*

Details

Mirror caps carbon | fits BMW M5 incl. Competition (F90) S63 | RKP

The RKP carbon mirror caps for the F90 are definitely a highlight on your vehicle.They impress with their perfect fit and easy installation. Details:- Flawless fit- Extremely light- Clear lacquered and high-gloss polished Compatible vehicles:BMW M5 441kW/600hpBMW M5 Competition 460kW/625hp

€869.00*

Mirror covers Carbon | fits for BMW M5/M8 incl. Competition/CS (F90/F91/F92/F93) S63 | Aulitzky Tuning

The exterior mirror covers in glossy pre-preg carbon fibre give your standard mirror units a more aggressive and premium look.Quick and easy to fit, they are a styling option with perfect value for money to enhance the road presence of your vehicle. Unlike normal carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Guaranteed fit- registration free Scope of delivery:- 1x pair of mirror caps Compatible vehicles:BMW F90 M5 SaloonBMW F91 M8 ConvertibleBMW F92 M8 CoupeBMW F93 M8 Gran Coupé Note: This is NOT an original BMW product!

€419.00*

Performance increase via additional control unit | BMW M5 CS (F90) 635hp

Facts:- Plug & Play installation using illustrated installation instructions- Special wiring harness for your vehicle- High-quality electronics “Made In Germany”- Electronic components with product qualification for motor vehicles according to AEC-Q100 installed- Support from us as co-developer and manufacturer Scope of delivery:The scope of delivery includes the motorsport add-on module, an engine-specific wiring harness, illustrated installation instructions in DE/EN and a BYPASS connector, which you can use to restore your vehicle to series production. Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeYear of constructionBMW 5er (F90)M5 CS467kW / 635hp4395cm³S63 B44 B03.21 - LEGAL INFORMATION: THE INSTALLATION OF ADDITIONAL ELECTRONICS IS A STRUCTURAL MODIFICATION TO THE MANUFACTURER'S ELECTRONICS. WITHOUT REGISTRATION IN THE VEHICLE DOCUMENTS BY MEANS OF AN INDIVIDUAL CERTIFICATE FROM TÜV; DEKRA OR OTHER RECOGNIZED TESTING INSTITUTES, THE INSTALLATION WILL INVALIDATE THE OPERATING LICENSE. IF USED ON PUBLIC ROADS, THIS WILL RESULT IN THE LOSS OF INSURANCE COVER. WE DO NOT CURRENTLY HAVE A PARTS CERTIFICATE FOR YOUR VEHICLE. THEREFORE, THIS SYSTEM IS EXCLUSIVELY SUITABLE FOR MOTORSPORT. ATTENTION: IF YOU USE THE ADDITIONAL ELECTRONICS, YOU MAY LOSE YOUR WARRANTY CLAIMS AGAINST THE SELLER OR WARRANTY CLAIMS AGAINST THE MANUFACTURER. IF YOU HAVE ANY FURTHER QUESTIONS, PLEASE DO NOT HESITATE TO CONTACT US!

€1,699.00*

Rear spoiler Carbon | fits BMW 5 Series/ M5 incl. Competition (G30/F90) | 3DDesign

A high-end kit for a high-end car. The new F90 gets a new, innovative look. The new AERO body kit from 3DDesign for the F90 fits seamlessly into the familiar, discreetly aggressive race style of the 3DDesign lines. The iconic design is complemented by a perfect fit and the usual uncompromising quality. The F90 spoiler is the real surprise in the body kit. There is no sign of the usual understatement with this aero spoiler. Steeply curved, the F90 spoiler is the most aggressive spoiler from 3DDesign to date. Curved far upwards, it is positioned directly in the airstream and provides the appropriate downforce. Performance spoiler for the F90, which is also a real visual upgrade! Pure luxury! Compatible vehicles:BMW 5 (G30, F90) 518 d 2018-2020BMW 5 (G30, F90) 518 d Mild-Hybrid 2020-2023BMW 5 (G30, F90) 520 d 2016-2023BMW 5 (G30, F90) 520 d Mild-Hybrid 2019-2023BMW 5 (G30, F90) 520 d Mild-Hybrid xDrive 2019-2023BMW 5 (G30, F90) 520 d xDrive 2016-2023BMW 5 (G30, F90) 520 i 2017-2023BMW 5 (G30, F90) 520 i Mild-Hybrid 2020-2023BMW 5 (G30, F90) 525 d 2017-2019BMW 5 (G30, F90) 530 d 2016-2020BMW 5 (G30, F90) 530 d Mild-Hybrid 2020-2023BMW 5 (G30, F90) 530 d Mild-Hybrid xDrive 2020-2023BMW 5 (G30, F90) 530 d xDrive 2016-2020BMW 5 (G30, F90) 530 e Plug-in Hybrid 2017-2023BMW 5 (G30, F90) 530 e Plug-in Hybrid xDrive 2017-2023BMW 5 (G30, F90) 530 i 2016-2020BMW 5 (G30, F90) 530 i Mild-Hybrid 2020-2023BMW 5 (G30, F90) 530 i Mild-Hybrid xDrive 2020-2023BMW 5 (G30, F90) 530 i xDrive 2016-2023BMW 5 (G30, F90) 540 d Mild-Hybrid xDrive 2020-2023BMW 5 (G30, F90) 540 d xDrive 2017-2020BMW 5 (G30, F90) 540 i 2016-2020BMW 5 (G30, F90) 540 i Mild-Hybrid 2020-2023BMW 5 (G30, F90) 540 i Mild-Hybrid xDrive 2020-2023BMW 5 (G30, F90) 540 i xDrive 2016-2020BMW 5 (G30, F90) 545 e Plug-in Hybrid xDrive 2020-2023BMW 5 (G30, F90) M 550 d xDrive 2017-2020BMW 5 (G30, F90) M 550 i xDrive 2017-2023BMW 5 (G30, F90) M5 2017-2023BMW 5 (G30, F90) M5 Competition 2018-2023

€1,510.00*

Rear spoiler Carbon | fits BMW 5 Series/ M5 incl. Competition (G30/F90) | 3DDesign

Ratenrechner

Ask a question

Previously asked questions