Side skirts Carbon | fits for BMW M5 (F90) 600hp S63 | 3DDesign
€2,715.00*
Delivery time: approx. 4-12 weeks. Exact delivery time on request*.
Finanzieren Sie ihren Einkauf über die Targobank.
×
Ratenrechner
Ihre Monatsraten
6 Monate
Kaufpreis:
Monatliche Rate:
Zinsen:
Gesamtbetrag inkl. Zinsen:
Product number:
DDCSSM5F90
Product information "Side skirts Carbon | fits for BMW M5 (F90) 600hp S63 | 3DDesign"
A high-end kit for a high-end car. The new F90 gets a new, innovative look.
The new AERO body kit from 3DDesign for the F90 fits seamlessly into the familiar, discreetly aggressive racing style of the 3DDesign lines. The iconic design is complemented by a perfect fit and the usual uncompromising quality.
The side skirts round off the look of the wide diffuser and the aggressive front lip and widen the car for more downforce.
Performance side skirts for the F90, which are also a real visual upgrade! Pure luxury!
Compatible vehicles:
BMW 5 (G30, F90) M5 2017-2023
There aren't any asked questions yet.
Actuator for exhaust flap | fits BMW F8X F9X G8X | 18307851568 | Aulitzky Tuning
€106.00*
Actuator for exhaust flap
OEM part number: 18307851568 (18 30 7 851 568)
Suitable for the following BMW models with exhaust flap:
F80 F82 F83 F85 F86 F87N F90 F91 F92 F93 F95 F96 F97 F98
G01 G02 G05 G06 G14 G15 G16 G20 G21 G22 G23 G26 G30 G42 G82 G83
%
Air filter | fits BMW M5/M8 incl. Competition/CS (F90/G90/G99/F91/F92/F93) S63 S68 | Aulitzky Tuning
€149.00*
€199.00*
(25.13% saved)
Here you get an original TitanTec sports air filter with all its advantages:- higher air flow rate- higher filter performance (even smaller particles are filtered)- The particles are trapped in the filter after intake and thus remain trapped until cleaning.- Washable and reusable filter- Increased air flow and therefore better combustion in the engine- No reduction in air flow over a minimum of 50,000 km- Sufficient air even at high engine speeds- more power- Better intake noise- Reduced fuel consumption
Only TitanTec sports air filters use polyurethane as the edge material. Polyurethane is more resistant to petrol, vapours and the like. It has an ideal remoulding. This ensures that the edge of the filter is 100% sealed even when it is reinserted after cleaning.
The edge surface is made from a single mould. With many other makes, pores in the edge material and joining surfaces where the edge is joined together often lead to a crack in the edge, which can result in unclean air being sucked into the engine.
With paper filters, the air flow rate is significantly lower and decreases further after just a short period of use.In addition, paper filters must be disposed of after the specified mileage. TitanTec sports air filters last a lifetime. This is good for the environment and your wallet.Compared to TitanTec sports air filters, other washable cotton filters only filter much larger particles.
Cleaning the filters:A TitanTec sports air filter has no oil residue and has 100% of its original performance again after cleaning.Cleaning is quick and easy.We recommend cleaning after 15,000-20,000 kilometres or once a year at the latest.The best time to clean the air filter is around the end of May or beginning of June, i.e. after the pollen count, as this is the time when the air filter is under the most strain.Under no circumstances should aggressive cleaning agents such as petroleum ether, cleaning petrol, brake cleaner etc. be used, as this can damage the material.
Details:
1x set of panel filters (right/left)
Length: 264 mm
Width: 215 mm
Compatible vehicles:BMW M5 (F90) 600 hp, 441 kW, 09/17 to 06/23 BMW M5 (F90) M5 Competition, 625 hp, 460 kW, 07/18 to 06/23 BMW M5 (F90) M5 CS, 635 hp, 467 kW, 03/21 to 02/22 BMW M5 (G90) M5 plug-in hybrid all-wheel drive, 727 hp, 535 kW, from 07/24 BMW M5 Touring (G99) M 5 plug-in hybrid all-wheel drive, 727 hp, 535 kW, from 10/24 BMW M8 Coupe (F92) M8, 600 hp, 441 kW, from 07/19 BMW M8 Coupe (F92) M8 Competition, 625 hp, 460 kW, from 07/19 BMW M8 Gran Coupe (F93) M8, 600 hp, 441 kW, from 11/19 BMW M8 Gran Coupe (F93) M8 Competition, 625 hp, 460 kW, from 11/19 BMW M8 Convertible (F91) M8, 600 hp, 441 kW, from 07/19 BMW M8 Convertible (F91) M8 Competition, 625 hp, 460 kW, from 07/19Note: This is NOT an original BMW product!
Aulitzky Exhaust | ECE exhaust system ex cat/OPF with flap control | fits BMW M5 incl. Competition/CS (F90) S63
€4,199.00*
OPF:
Vehicle without OPF
|
Surface:
blasted (glass beads)
Facts:
- Exhaust flaps with ceramic bearings
- Electric flaps
- Plug & Play driveable with original exhaust system
- Approval/installation possible in conjunction with our downpipe
- Cat/OPF back system
- Made in Germany (Lake Constance)
- with/without ECE approval (depending on choice of flap control)*
Compatible vehicles:VehicleTypePowerEngine capacityEngineYear of construction
BMW 5 Series (F90)M5 441kW / 600hp4395ccS63 B44 B09.17 -
BMW 5 Series (F90)M5 Competition460kW / 625hp4395cm³S63 B44 B07.18 -
BMW 5 Series (F90)M5 CS467kW / 635hp4395cm³S63 B44 B03.21 -
BMW 8 Series (F92)M8 441kW / 600hp4395cm³S63 B44 B07.19 -
BMW 8 Series (F92)M8 Competition460kW / 625hp4395cm³S63 B44 B07.19 -
*ATTENTION! In conjunction with the standard or ECE flap control system (with type approval), this flap exhaust system has ECE approval so that it can be used legally within the scope of the StVZO without registration in the vehicle documents.The use of flap exhaust systems in conjunction with the race flap control (without approval) is not permitted for use on public roads and is only intended for racing purposes! If you nevertheless install a product without approval in your vehicle and use it within the scope of the StVZO, you are liable to prosecution. Possible consequences that you can expect in this case: Expiry of the operating licence in accordance with §19 of the StVZO and possible resulting immobilisation of the vehicle. Other possible consequences, such as a charge of tax evasion, as well as possible investigations by the environmental authorities are at the discretion of the investigators.
Variants from €3,899.00*
Tip
Aulitzky Tuning | Coolant reservoir | fitting for BMW M5 F90
€1,099.00*
The Aulitzky Tuning Billet Coolant Reservoir is a true eye candy in your engine Bay.Improved complete Billet Aluminium construction for thermic stabilization.Compatible to the M5 F90
Tip
Cold Air Intake System | fits BMW M5/M8 incl. Competition/CS (F90/F91/F92/F93) S63 | Blackboost
€1,899.00*
Transform your F9X into a high-performance powerhouse with the BlackBoost cooling air intake system. Experience more power, style and driving dynamics with this premium upgrade.
In the world of performance modifications, the airbox is one of the most important engine components you should upgrade. The factory airbox is very restrictive in terms of airflow and filter area.
Our cooling air intakes are designed and engineered to overcome these factory restrictions and deliver the maximum airflow with the lowest possible temperatures given the space available.
The BlackBoost Cold Air Intakes are designed to be flush with the bonnet of the vehicle and ensure a consistent seal with the rubber seals of the airbox, whilst also ensuring a large surface area for our 10.92cm (4.3 inch) Twin Flow Conical Filters to work properly.
The BlackBoost Twin Flow filters have been specifically designed to maximise airflow and surface area. With a diameter of 10.92 cm (4.3 inches) and a height of 20.32 cm (8 inches), they are guaranteed to provide the best airflow and protection.
The airboxes are laser-cut aluminium panels with highly complex CNC bends, assembled with stainless steel fasteners and finished with a high-quality black powder coating.
The BlackBoost intake kit is a plug-and-play solution that works perfectly without further customisation and requires no additional software tuning.
It also works smoothly in combination with turbo upgrades, downpipes, methanol injections etc. to unleash the necessary airflow and utilise the full capacity of the machine for those aiming for 1000+ WHP figures.
Scope of delivery:- Powder coated airbox- 2x 10.92 cm (4.3 inch) twin high flow dry filters- 2x BlackBoost CFD developed filter adapters
Key features:- Proven power increase from 8 to 30+ hp on production vehicles- Improved responsiveness across the entire rev range- Optimised airflow and increased volume range compared to standard equipment- Increased surface area of the filter elements- Can support airflow for 1000+ WHP configurations- Larger filter element surface area compared to OEM- Plug-and-play bolt-on installation- No ECU tuning required
Compatible vehicles:
BMW M5 (F90) 441kW/600hp 4395cm³ S63B44B (2017+)
BMW M5 (F90) Competition 460kW/625hp 4395cm³ S63B44B (2017+)
BMW M5 (F90) CS 467kW/635hp 4395cm³ S63B44B (2017+)
BMW M8 (F91/F92/F93) 441kW/600hp 4395cm³ S63B44B (2019+)
BMW M8 (F91/F92/F93) Competition 460kW/625hp 4395cm³ S63B44B (2019+)
Diffusor Carbon | fits BMW M5 incl. Competition (F90) S63 | 3DDesign
€2,495.00*
3DDesign Carbon Diffuser M5 F90 Variant:
Diffuser, single
A high-end kit for a high-end car. The new F90 gets a new, innovative look. The new AERO body kit from 3DDesign for the F90 fits seamlessly into the familiar, discreetly aggressive race style of the 3DDesign lines. The iconic design is complemented by a perfect fit and the usual uncompromising quality.
The real eye-catcher and centerpiece of the body kit - an carbon diffuser that is uncompromisingly and aggressively designed as a direct replacement part. The clear lines and curved shape fit perfectly into the image of the F90. Three inner fins not only ensure a racy look, but also optimum airflow. The F90 M5 carbon diffuser comes in two parts and can also be purchased separately. A performance diffuser for the F90, which is also a real visual upgrade! Pure luxury!
Compatible vehicles:BMW 5 (G30, F90) M5 2017-2023BMW 5 (G30, F90) M5 Competition 2018-2023
Variants from €1,620.00*
Diffusor Competition Dry Carbon | fits BMW M5 incl. Competition (F90) S63 | AutoTecknic
€932.00*
Dry Carbon Competition diffuser for the rear center diffuser of the F90.
Designed to mount directly to the factory lower mounting position for quick and easy installation.
The rear diffuser features durable and precise plastic mounting positions and is manufactured using autoclave technology for ultimate lightweight, high durability and precise fitment.
Compatible vehicles:BMW 5 (G30, F90) M5 2017-2023BMW 5 (G30, F90) M5 Competition 2018-2023
Front lip Carbon | fits BMW 5 Series/ M5 incl. Competition (G30/F90) | 3DDesign
€2,699.00*
A high-end kit for a high-end car. The new F90 gets a new, innovative look. The new AERO body kit from 3DDesign for the F90 fits seamlessly into the familiar, discreetly aggressive racing style of the 3DDesign lines. The iconic design is complemented by a perfect fit and the usual uncompromising quality. As with the F10, the front lip comes with a maximum amount of carbon fibre. Above the aggressive centreboard with aero lift slits, the lip extends into the air intakes on the right and left. A performance front lip for the F90 that is also a real visual upgrade! Pure luxury!
Compatible vehicles:BMW 5 (G30, F90) 518 d 2018-2020BMW 5 (G30, F90) 518 d mild hybrid 2020-2023BMW 5 (G30, F90) 520 d 2016-2023BMW 5 (G30, F90) 520 d Mild-Hybrid 2019-2023BMW 5 (G30, F90) 520 d Mild-Hybrid xDrive 2019-2023BMW 5 (G30, F90) 520 d xDrive 2016-2023BMW 5 (G30, F90) 520 i 2017-2023BMW 5 (G30, F90) 520 i Mild-Hybrid 2020-2023BMW 5 (G30, F90) 525 d 2017-2019BMW 5 (G30, F90) 530 d 2016-2020BMW 5 (G30, F90) 530 d Mild-Hybrid 2020-2023BMW 5 (G30, F90) 530 d Mild-Hybrid xDrive 2020-2023BMW 5 (G30, F90) 530 d xDrive 2016-2020BMW 5 (G30, F90) 530 e Plug-in Hybrid 2017-2023BMW 5 (G30, F90) 530 e Plug-in Hybrid xDrive 2017-2023BMW 5 (G30, F90) 530 i 2016-2020BMW 5 (G30, F90) 530 i Mild-Hybrid 2020-2023BMW 5 (G30, F90) 530 i Mild-Hybrid xDrive 2020-2023BMW 5 (G30, F90) 530 i xDrive 2016-2023BMW 5 (G30, F90) 540 d Mild-Hybrid xDrive 2020-2023BMW 5 (G30, F90) 540 d xDrive 2017-2020BMW 5 (G30, F90) 540 i 2016-2020BMW 5 (G30, F90) 540 i Mild-Hybrid 2020-2023BMW 5 (G30, F90) 540 i Mild-Hybrid xDrive 2020-2023BMW 5 (G30, F90) 540 i xDrive 2016-2020BMW 5 (G30, F90) 545 e Plug-in Hybrid xDrive 2020-2023BMW 5 (G30, F90) M 550 d xDrive 2017-2020BMW 5 (G30, F90) M 550 i xDrive 2017-2023BMW 5 (G30, F90) M5 2017-2023BMW 5 (G30, F90) M5 Competition 2018-2023
Front lip Carbon | fits BMW M5 incl. Competition (F90) S63 | AutoTecknic
€799.00*
AutoTecknic's vision is to develop the most advanced, innovative and unique products on the market to meet the needs of the most demanding customers. The lightweight carbon fiber aerodynamic products are uniquely designed to enhance the original design of your vehicle.
The central design philosophy "understand functional elegance" takes the sporty appearance of your vehicle to a new level.
Quality products characterize the AutoTecknic brand. Every single part must pass strict quality controls before it reaches your vehicle. Customers expect nothing less than the best parts from AutoTecknic, so naturally we expect nothing less.
AutoTecknic's autoclaved pre-preg carbon fiber structure gives the product superior stiffness, strength and durability compared to traditional handmade carbon fiber composites.
AutoTecknic Dry Carbon Center Front Lip for the F90 is both highly visible and highly functional.
Compatible vehicles:BMW 5 (G30, F90) M5 2017-2023BMW 5 (G30, F90) M5 Competition 2018-2023
Front splitter Performante Dry Carbon | fits BMW M5 incl. Competition (F90) S63 | AutoTecknic
€715.00*
Dry Carbon Performante Aero Splitter for the F90.
Designed to seamlessly follow the curvature and mount directly onto the lower bumper mount for quick and easy installation.
The Dry Carbon Aero Splitters are manufactured using signature autoclave technology with pre-preg 3K twill carbon fibre and finished with UV protected high gloss clear coat for the ultimate lightweight, durable and snug fitting splitters.
The name Dry Carbon comes from the manufacturing process. Dry Carbon is formed by using a pre-preg or impregnated piece of carbon material. This piece of carbon is first placed in a mould and then placed in a sealed vacuum (autoclave) to cure properly. This particular method creates the least amount of waste and forms a lighter version of carbon than the wet method. The autoclave vacuum process for producing dry carbon means that fewer pinholes and virtually no air pockets form in the carbon. Dry carbon is the highest quality version of carbon products produced.
AutoTecknic Dry Carbon Performante Aero Splitters are both highly visible and highly functional.
Compatible vehicles:BMW 5 (G30, F90) M5 2017-2023BMW 5 (G30, F90) M5 Competition 2018-2023
Intake system Carbon | fits BMW M5/M8 (F90/F91/F92/F93) 600hp S63 | Eventuri
€2,547.00*
Facts:
Acceleration time: 60-130mph Reduced by 0.22 seconds
Max. Flow rate per airbox at 28? H2O: Standard 620 CFM, Eventuri 736 CFM
Material: Carbon
Manufacturer: Eventuri
Parts certificate: A certificate is available for this product for certain regions and vehicles (details below)
The F90 Eventuri intake system has been developed through extensive real-world testing and airflow simulation analyses. Now in the updated V2 design, it features sealed filter housings to maintain a more stable IAT even when stationary. The new covers that seal the housings, in conjunction with our blade and shield combination, provide unrestricted airflow while maintaining low IATs through cold air saturation. Our large front air scoops channel ambient air directly into the intake area, ensuring that the engine does not suffer from heat soak. In addition, our gold-coloured, heat-reflecting shields have integrated flow guides that direct the ambient air from the blades into the filters. We have also managed to increase the cross-sectional area of the inlet pipe by over 30% compared to the standard inlet, as it passes through the openings in the struts.
The Eventuri difference
The F90 Eventuri system uses our patented carbon fibre housings with our bespoke Gen 2 filters, providing an aerodynamically efficient airflow path from the filter to the turbos. Not just another cone filter with a heat shield, but a unique design that creates the Venturi effect and maintains laminar flow conditions to reduce turbo drag.
Internal volume
Another important design feature of the inlet housings is the internal volume of the tubes as they pass through the struts. On the F90, the airbox system must pass through an oval opening in the strut brace on each side before reaching the turbo inlets. We have managed to increase the internal size of our inlets at this junction, resulting in more available volume for the turbos and therefore less restriction. The increase in cross-sectional area between the Eventuri and the standard airbox is 31% as follows:
Inner cross-sectional area of the intake pipe at the strut brace:
Standard airbox pipe = 6487 mm²
Eventuri intake pipe = 8497 mm²
Each intake system consists of:
2 x carbon fibre venturi housings with integrated pipes
2 x customised high-performance Generation 2 filters
2 x carbon fibre filter covers
2 x aluminium intake covers
2 x carbon fibre air scoops
2 x laser-cut heat shields, lined with gold heat reflective material
2 x laser-cut air ramps integrated into the heat shields
High-quality silicone couplings and OEM hose clamps
Parts certificate
The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle.
A certificate is available for this product for the following regions and vehicles:
* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24
Country Model Type approval*
DE/AT BMW M5 e1*2007/46*1828*..
DE/AT BMW M5 Competition e1*2007/46*1828*..
DE/AT BMW M8 e1*2007/46*2019*..
DE/AT BMW M8 Competition e1*2007/46*2019*..
Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction
BMW 5 Series (F90)M5 441kW / 600hp4395cm³S63 B44 B09.17 -
BMW 8 Series (F91/F92/F93)M8 441kW / 600hp4395cm³S63 B44 B07.19 -
Intercooler | fits BMW M5/M8 incl. Competition/CS (F90/F91/F92/F93) S63 | CSF Race
€3,694.95*
The intercooler for F90 and F92 knows how to impress and will certainly not disappoint you.
ColourThe intercooler comes in a classic, appealing black that matches any vehicle colour and rounds off the overall appearance of your car.
InstallationThe installation of our intercooler is as simple as the original part. It's a direct replacement, which means you don't have to follow complicated instructions or buy additional parts.
MaterialThe intercooler is made of robust and durable aluminium. This material is lightweight yet highly resistant to high temperatures, making it ideal for the requirements of an intercooler.
Compatible vehicles:BMW 5 (G30, F90) M5 2017-2023BMW 5 (G30, F90) M5 CS 2021-2022BMW 5 (G30, F90) M5 Competition 2018-2023BMW 8 Convertible (G14, F91) M8 since 2019BMW 8 Convertible (G14, F91) M8 Competition Since 2019BMW 8 Coupe (G15, F92) M8 Since 2019BMW 8 Coupe (G15, F92) M8 Competition Since 2019BMW 8 Gran Coupe (G16, F93) M8 Since 2019BMW 8 Gran Coupe (G16, F93) M8 Competition Since 2019
KW V4 coilover suspension | fits BMW M5 (F90/G30) incl. Competition/CS | 3A7200CB | 3A7200CC
KW V4 coilover suspension - State of the Art
With the new KW V4 with its stainless steel or aluminium coilover struts, you give your super sports car the necessary reserves to further increase the driving dynamics. The three-way adjustable high-performance dampers with their independent adjustment of the rebound, low-speed and high-speed compression damping are based on the successful racing technology of the multiple overall winner of the ADAC Zurich 24h Race Nürburgring and, depending on the vehicle-specific version, have aluminium support bearings. The new KW V4 is developed exclusively for selected high-performance vehicles, which can be moved more safely at the limits of driving dynamics thanks to our KW suspension technology.
- 3-way adjustable high-performance dampers with stainless steel coilover struts
- Separate and independent damper adjustment in:
- Rebound damping with 16 exact clicks + (firmer) / - (more comfortable)
- Low-speed compression damping with 6 exact clicks + (firmer) / - (more comfortable)
- High-speed compression damping with 14 exact clicks + (firmer) / - (more comfortable)
- Two basic set-ups ex works with comfort setting and performance setting
- Depending on the vehicle, aluminium support bearings are an integral part of the scope of delivery
Please note the conditions and instructions for this product:
- VA + HA height-adjustable (coilover struts)
- Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible.
- Vehicles with electronic damper control must be decommissioned. Electronics kit for decommissioning is included in the scope of delivery for the “YES” article variant.
- Variant 4 / Variant 5 Suspension struts / dampers made of aluminium or combined on each axle made of aluminium and stainless steel
Technical information:
Lowering VA/HA (mm): 15-30/10-30
Design: V4
Adjustable rebound and compression damping
Material: Aluminium
Adjustment VA/HA: thread/thread
Approval: Parts certificate (§19.3)
Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
BMW 5 Series (G30, F90) F5LM, G5L 09/2016- M5 notchback petrol 441 KW 4395 ccm 8 all-wheel drive
BMW 5 Series (G30, F90) F5LM, G5L 09/2016- M5 Competition notchback petrol 460 KW 4395 ccm 8 all-wheel drive
BMW 5 Series (G30, F90) F5LM, G5L 09/2016- M5 CS notchback petrol 467 KW 4395 ccm 8 all-wheel drive
From
€6,022.59*
Lowering springs 30/30mm / 20/20mm | fits BMW M5 Sedan incl. Competition (F90) | 28686-1 | H&R
€524.00*
H&R lowering springs for F90 models from 2018 (VA20-30/HA20-30mm)
H&R sports spring kits are the ideal solution if you want to optimize the handling of your vehicle and achieve a sporty look while maintaining the standard driving comfort.
Details:Lowering VA/HA Sedan: 30/30mmLowering VA/HA Competition Sedan: 20/20mmSuspension: for vehicles with electric damper controlType of approval: with general operating permit (ABE)
Product advantages:Sporty look and performanceLowering of the vehicle's center of gravityLinear or progressive suspension characteristicsCan be combined with standard or retrofit dampersOptimized driving dynamicsSurface protection through powder coatingMade in Germany
Compatible vehicles:BMW M5 Sedan F90 type F5LM only with adaptive damper control 2018- front axle 30mm / rear axle 30mmBMW M5 Competition Sedan F90 type F5LM, only with adaptive damper control 2018- front axle 20mm / rear axle 20mm
%
Lowering springs Pro-Kit Performance VA+HA 25mm | fits BMW M5 incl. Competition (F90) S63 | Eibach
€425.00*
€505.75*
(15.97% saved)
Eibach Pro-Kit performance suspension springs for front and rear axle E10-20-041-01-22
The Eibach Pro-Kit lowering springs are the ideal solution for your vehicle, as the kit lowers the centre of gravity, reduces rebound when accelerating, reduces body roll when cornering and dips when braking. As a result, understeer and oversteer no longer occur.
Lowering the vehicle with the Pro-Kit springs reduces the standard distance between the tyres and the wheel arch and gives the vehicle a sporty look. In addition, the handling of the vehicle is maximised.
The Eibach Pro-Kits are designed by Eibach suspension engineers and testing experts to deliver a combination of sporty looks and performance without compromising on safety or ride quality.
- Developed and tested for combination with standard and aftermarket dampers- Component of the Eibach Pro system- Top performance handling- Lowers the vehicle's centre of gravity by up to 40 mm (depending on the vehicle)- Spring design for traction and attraction- Progressive suspension characteristics- Performance handling- ABE or parts certificate
Note: Only for vehicles without levelling control.
Information:- Lowering front axle: approx. 25mm- Lowering rear axle: approx. 20mm- Type of approval: with expert opinion- Illustration may differ from the original
Compatible vehicles:- Axle load front axle: up to 1215kg- Axle load rear axle: up to 1260kg- EC type approval number: e1*2007/46*1688*..- Only for vehicles without levelling system
BMW 5 (F90) M5 441kW / 600PS 7909-ABWBMW 5 (F90) M5 Competition 460kW / 625hp 7909-ABV
Mirror caps Carbon | fits BMW M5 incl. Competition (F90) S63 | RKP
€869.00*
The RKP carbon mirror caps for the F90 are definitely a highlight on your vehicle.They impress with their perfect fit and easy installation.
Details:- Flawless fit- Extremely light- Clear lacquered and high-gloss polished
Compatible vehicles:BMW M5 441kW/600PSBMW M5 Competition 460kW/625PS
Mirror covers Carbon | fits BMW M5/M8 incl. Competition/CS (F90/F91/F92/F93) S63 | Aulitzky Tuning
€419.00*
The exterior mirror covers in glossy pre-preg carbon fibre give your standard mirror units a more aggressive and premium look.Quick and easy to fit, they are a styling option with perfect value for money to enhance the road presence of your vehicle.
Unlike normal carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish.
Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Guaranteed fit- registration free
Scope of delivery:- 1x pair of mirror caps
Compatible vehicles:BMW F90 M5 SaloonBMW F91 M8 ConvertibleBMW F92 M8 CoupeBMW F93 M8 Gran Coupé
Note: This is NOT an original BMW product!
Performance increase via additional control unit | fits BMW M5 CS (F90) 635hp
€1,699.00*
Facts:- Plug & Play installation using illustrated installation instructions- Special wiring harness for your vehicle- High-quality electronics “Made In Germany”- Electronic components with product qualification for motor vehicles according to AEC-Q100 installed- Support from us as co-developer and manufacturer
Scope of delivery:The scope of delivery includes the motorsport add-on module, an engine-specific wiring harness, illustrated installation instructions in DE/EN and a BYPASS connector, which you can use to restore your vehicle to series production.
Compatible vehicles:
VehicleVehicle typePowerEngine capacityEngine typeYear of constructionBMW 5er (F90)M5 CS467kW / 635hp4395cm³S63 B44 B03.21 -
LEGAL INFORMATION:
THE INSTALLATION OF ADDITIONAL ELECTRONICS IS A STRUCTURAL MODIFICATION TO THE MANUFACTURER'S ELECTRONICS. WITHOUT REGISTRATION IN THE VEHICLE DOCUMENTS BY MEANS OF AN INDIVIDUAL CERTIFICATE FROM TÜV; DEKRA OR OTHER RECOGNIZED TESTING INSTITUTES, THE INSTALLATION WILL INVALIDATE THE OPERATING LICENSE. IF USED ON PUBLIC ROADS, THIS WILL RESULT IN THE LOSS OF INSURANCE COVER.
WE DO NOT CURRENTLY HAVE A PARTS CERTIFICATE FOR YOUR VEHICLE. THEREFORE, THIS SYSTEM IS EXCLUSIVELY SUITABLE FOR MOTORSPORT.
ATTENTION: IF YOU USE THE ADDITIONAL ELECTRONICS, YOU MAY LOSE YOUR WARRANTY CLAIMS AGAINST THE SELLER OR WARRANTY CLAIMS AGAINST THE MANUFACTURER. IF YOU HAVE ANY FURTHER QUESTIONS, PLEASE DO NOT HESITATE TO CONTACT US!
Performance intercooler kit | fits BMW M5/M8 incl. Competition/CS (F90/F91/F92/F93) 4.4L S63 | Wagner Tuning
€2,990.00*
Compatible vehicles:BMW F90 M5 441KW/600hp (2017+)BMW F90 M5 Competition 460KW/625hp (2018+)BMW F90 M5 CS 467KW/635hp (2021+)BMW F91/92/93 M8 441KW/600hp (2019+)
Boost your model's performance to a new level with the Wagner Tuning high-performance intercooler!
The 4.4-litre V8 biturbo engine (S63 B44T4) has an indirect charge air cooling circuit in which the charge air is cooled by a water-cooled charge air cooler. With our innovative high-performance intercooler from Wagner Tuning, you can replace the original intercooler and experience an impressive increase in performance.
Our high-performance intercooler has a new type of performance mesh with dimensions of 192 mm x 156 mm x 128 mm. It has been specially developed for the high demands of the engine and offers an incredible 75 % more external mesh volume compared to the standard intercooler. The optimised ratio between the inner and outer cooling surface ensures maximum heat transfer and optimum internal airflow. The cast aluminium end boxes were designed using the latest CAD technology and optimised using CFD simulations. The result is outstanding cooling properties with minimal back pressure, ensuring optimum cooling of the supercharged air with a significant increase in performance. This kit is ideally suited even for demanding racing.
To ensure a long-lasting cooling effect, all Wagner Tuning intercoolers are equipped with a thermally conductive anti-corrosion coating. Installation of the system is uncomplicated thanks to our detailed installation instructions and is carried out in plug & play style.
Advantages:- Significantly improved cooling performance- More power and torque for your engine- Mechanical relief of the turbocharger- Additional WMI ports- 100 % pressure resistance- 100 % plug-and-play- Up to 4 years warranty
Mains dimensions OEM intercooler:152 mm x 143 mm x 100 mmV = 2.19 litres
Mains dimensions Wagner Tuning intercooler:192 mm x 156 mm x 128 mmV = 3.83 litres (+75%)
Scope of delivery:2 intercoolers5 silicone air hoses1 mounting material
Attention: Not authorised in the area of the StVZO.
Tip
Performance package The Aulitzky App + HJS ECE downpipe + fitting | fits BMW M2/M3/M4 incl. Competition/CS/GTS (F80/F82/F83/F87) S55
Service package: The AULITZKY app "do it yourself" + downpipe (incl. installation) + registration
Get your app now to tune your car yourself or manage a selection of your finished maps, which have been individually tuned on our test bench, and flash them to your vehicle in no time at all.
In addition to flashing your engine control unit, we also offer transmission programming.
It is also possible to fully read and delete the fault memory.
Your benefits at a glance:
-software for ECU (engine control unit)
-Software for TCU (transmission control unit)
-Read fault memory
-Delete fault memory
-Datalogging
-Tuning for Stage 1 & Stage 2 included
-Custom maps possible
-Stage 3 available on site for an additional charge
Please note: From certain model years and variants, an OBD unlock or ECU unlock is required to ensure that your vehicle can be flashed via OBD.
The OBD unlock can be carried out by sending the ECU to us or by our service centre partners at various locations in Germany. For the ECU unlock, we need the vehicle on site for approx. 1.5 - 2 weeks.
We strongly recommend checking the timing or installing a Crankhub Fix before tuning this engine. Failure to do so may result in misaligned timing and damage to the engine or components such as the cam phaser.
-Stage 1: Pipercross air filter
-Stage 2: additional downpipes, charge & boost pipe
-Stage 3: additional upgrade turbocharger, exhaust system, radiator package
- for higher mileage: clutch upgrade
*Note: Registration of the performance upgrade is ONLY possible in conjunction with the HJS downpipe (HJS90812040 for nonOPF models, HJS90822040 for OPF models).The corresponding downpipe (nonOPF or OPF) is automatically included in this package and is determined by us based on the variant selection. For easier processing, please send us a photo of your vehicle registration certificate by e-mail after ordering.
Compatible vehicles:VehicleVehicle typePower outputcubic capacityEngineYear of construction
BMW 2 Series Coupe (F87)M2 Competition302kW / 411hp2979ccS55 B30 A06.18 - 06.21
BMW 2 Series Coupe (F87)M2 CS331kW / 450hp2979ccS55 B30 A11.19 - 06.21
BMW 3 Series (F80)M3317kW / 431hp2979ccS55 B30 A03.14 - 10.18
BMW 3 Series (F80)M3 Competition331kW / 450hp2979ccS55 B30 A03.16 - 10.18
BMW 4 Series (F82/F83)M4317kW / 431hp2979cm³S55 B30 A03.14 - 07.20
BMW 4 Series (F82/F83)M4 Competition331kW / 450hp2979ccS55 B30 A03.16 - 07.20
BMW 4 Series Coupe (F82)M4 CS338kW / 460hp2979ccS55 B30 A07.17 - 06.19
BMW 4 Series Coupe (F82)M4 GTS368kW / 500hp2979ccS55 B30 A03.16 - 06.19
€6,248.00*
Rear spoiler Carbon | fits BMW 5 Series/ M5 incl. Competition (G30/F90) | 3DDesign
€1,510.00*
A high-end kit for a high-end car. The new F90 gets a new, innovative look. The new AERO body kit from 3DDesign for the F90 fits seamlessly into the familiar, discreetly aggressive race style of the 3DDesign lines. The iconic design is complemented by a perfect fit and the usual uncompromising quality. The F90 spoiler is the real surprise in the body kit. There is no sign of the usual understatement with this aero spoiler. Steeply curved, the F90 spoiler is the most aggressive spoiler from 3DDesign to date. Curved far upwards, it is positioned directly in the airstream and provides the appropriate downforce. Performance spoiler for the F90, which is also a real visual upgrade! Pure luxury!
Compatible vehicles:BMW 5 (G30, F90) 518 d 2018-2020BMW 5 (G30, F90) 518 d Mild-Hybrid 2020-2023BMW 5 (G30, F90) 520 d 2016-2023BMW 5 (G30, F90) 520 d Mild-Hybrid 2019-2023BMW 5 (G30, F90) 520 d Mild-Hybrid xDrive 2019-2023BMW 5 (G30, F90) 520 d xDrive 2016-2023BMW 5 (G30, F90) 520 i 2017-2023BMW 5 (G30, F90) 520 i Mild-Hybrid 2020-2023BMW 5 (G30, F90) 525 d 2017-2019BMW 5 (G30, F90) 530 d 2016-2020BMW 5 (G30, F90) 530 d Mild-Hybrid 2020-2023BMW 5 (G30, F90) 530 d Mild-Hybrid xDrive 2020-2023BMW 5 (G30, F90) 530 d xDrive 2016-2020BMW 5 (G30, F90) 530 e Plug-in Hybrid 2017-2023BMW 5 (G30, F90) 530 e Plug-in Hybrid xDrive 2017-2023BMW 5 (G30, F90) 530 i 2016-2020BMW 5 (G30, F90) 530 i Mild-Hybrid 2020-2023BMW 5 (G30, F90) 530 i Mild-Hybrid xDrive 2020-2023BMW 5 (G30, F90) 530 i xDrive 2016-2023BMW 5 (G30, F90) 540 d Mild-Hybrid xDrive 2020-2023BMW 5 (G30, F90) 540 d xDrive 2017-2020BMW 5 (G30, F90) 540 i 2016-2020BMW 5 (G30, F90) 540 i Mild-Hybrid 2020-2023BMW 5 (G30, F90) 540 i Mild-Hybrid xDrive 2020-2023BMW 5 (G30, F90) 540 i xDrive 2016-2020BMW 5 (G30, F90) 545 e Plug-in Hybrid xDrive 2020-2023BMW 5 (G30, F90) M 550 d xDrive 2017-2020BMW 5 (G30, F90) M 550 i xDrive 2017-2023BMW 5 (G30, F90) M5 2017-2023BMW 5 (G30, F90) M5 Competition 2018-2023
Shift paddle set aluminum (Gen. 3 steering wheel) | fits BMW M2/M3/M4/M5/M8 (F-Series), X3M/X4M/X5/X6/X7 (G-Series) | Evolve
Made from Aircraft Grade T-6061 Aluminum, the Evolve Gear Shift Paddle Set puts you back in control of your M Performance vehicle, more feel and ease of use make the Evolve Gear Shift Paddle Set the superior choice over OEM paddles.
Designed specifically for the M Performance steering wheel, the sleek Evolve Paddle Set follows the curves and lines of the steering wheel.
Available in two finishes to complement the interior of your vehicle, you have the choice between Titanium and Dark Anthracite.
We designed these paddle shifters with the racetrack in mind, so you can easily engage gears regardless of steering angle.In addition, the OEM control unit is retained and the entire paddle is replaced, this is not a stick-on version.
Fits all F-Series & G-Series vehicles with the latest Gen.3 M Performance steering wheel:G87 M2G80/G81 M3G82/G83 M4F90 M5F91/F92 M8F97 X3MF98 X4MG01 X3G02 X4G05 X5G06 X6G07 X7G30 5 Series
€296.00*
%
Side fins Carbon to match the carbon diffuser | fits BMW F90 M5 (F90) | 3D design | SPECIAL PRICE
€999.00*
€1,377.00*
(27.45% saved)
The high-end kit for your high-end vehicle!The iconic design is complemented by a perfect fit.
ATTENTION:These are only the fins to match the diffuser from 3D-Design!You will of course receive the fins for both sides.
SPECIAL PRICE - SMALL DEFECTS (see pictures)
Compatible vehicles:BMW 5 (G30, F90) M5 2017-2023
Side skirts Carbon | fits for BMW M5 (F90) 600hp S63 | 3DDesign
€2,715.00*
A high-end kit for a high-end car. The new F90 gets a new, innovative look. The new AERO body kit from 3DDesign for the F90 fits seamlessly into the familiar, discreetly aggressive racing style of the 3DDesign lines. The iconic design is complemented by a perfect fit and the usual uncompromising quality. The side skirts round off the look of the wide diffuser and the aggressive front lip and widen the car for more downforce. Performance side skirts for the F90, which are also a real visual upgrade! Pure luxury!
Compatible vehicles:BMW 5 (G30, F90) M5 2017-2023
Zuletzt gesehene Produkte
Zuletzt gesehene Produkte
Water intercooler | fits BMW M2/M3/M4 incl. Competition/CS/GTS (F80/F82/F83/F87) S55 | CSF Race
€1,499.00*
CSF Race F8X - Top Mount intercooler / with parts certificate!
World's first cast end tank intercooler for the S55 engine in the F8X.Multiple air splitters are cast into the end tanks on the hot/cold side to optimize airflow through the custom CSF liquid-to-air intercooler core (CFD analysis and testing completed to ensure optimal performance)** 60% larger core size compared to the OEM cooler.
Left/right, cross-flow, dual-pass core configuration with 2-stage water cooling for maximum efficiency and inlet temperature reduction (vs. OEM single-pass vertical flow design) Designed with 3D scanning / rapid prototyping technology to ensure precise fit and maximum surface area utilization.
“Drop-in fit” design for easy and quick plug-and-play installation. Complete with OEM style “Quick-Connect” water connection and sensor ports.Raw aluminum finish.Also available in a professional “Crinkle Black” powder coat finish.Lifetime Warranty.
Compatible vehicles:BMW 2 Coupe (F22, F87) M2 CS 2019-2021BMW 2 Coupe (F22, F87) M2 Competition 2018-2021BMW 3 (F30, F80) M3 2014-2018BMW 3 (F30, F80) M3 CS 2018-2018BMW 3 (F30, F80) M3 Competition 2016-2018BMW 4 Convertible (F33, F83) M4 2014-2020BMW 4 Convertible (F33, F83) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 2014-2020BMW 4 Coupe (F32, F82) M4 CS 2017-2019BMW 4 Coupe (F32, F82) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 GTS 2016-2019
Parts certificateThe manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle.A certificate is available for this product for the following regions and vehicles:* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24Country Model Type approval*DE/AT BMW M2 from e1*xx/xx*0377*09DE/AT BMW M2 Competition from e1*xx/xx*0377*09DE/AT BMW M3 from e1*xx/xx*0377*15DE/AT BMW M3 up to e1*xx/xx*0377*14DE/AT BMW M4 from e1*xx/xx*0377*15DE/AT BMW M4 up to e1*xx/xx*0377*14DE/AT BMW M4 CS e1*KS07/46*0012*..DE/AT BMW M4 GTS e1*KS07/46*0012*..
Tip
Rear lights OLED optics | fits BMW M3 incl. Competition/CS (G20/G80) | Aulitzky Tuning
€649.00*
The rear lights in OLED optics with 3D effect make it possible to achieve a new three-dimensional and at the same time very
sharply defined appearance. They are also an ideal change from the factory-fitted rear lights.
- Approved in the area of the StVZO by E-mark (registration-free)
- Service life of up to 50,000 hours.
- The rear lights are waterproof and extremely durable.
Suitable for the following models:
BMW G20 saloon
BMW G80 M3 saloon
For installation:
The rear lights are plug & play. No coding is necessary.
Scope of delivery:
1x set of rear lights (left + right)
Note: This is NOT an original BMW product!
Competition intercooler kit | fits Mini (F54/55/56/F57/F60) Cooper S/SD/D, One D, JCW 1.5/2.0L | Wagner Tuning
€860.00*
Competition intercooler upgrade kit plug and play suitable for:Mini Cooper S F54/F55/F56/F60 MKB: B46 & B48 (141KW/192hp) 2014+Mini One D F54/F55/F56 MKB: B37 (70KW/95hp) 2014+Mini Cooper D F54/F55/F56 MKB: B37 (85KW/116hp) 2014+Mini Cooper SD F54/F55/F56 MKB: B47 (125KW/170hp) 2014+Mini JCW F57 MKB: B48B20 (170KW/231hp) 2016+ (not suitable for JCW B48.D)Not suitable for JCW models of the F54/55/56/60 model seriesNot suitable for vehicles with engine code letters B48.C / B48.A / B38.C / B38.M / B38.B (LCI models)
Discover the Competition high-performance intercooler for your Mini F54 Cooper S - More power and performance for your Mini!
We proudly present our Competition High Performance Intercooler, specially designed to increase the power and efficiency of your Mini F54 Cooper S. Here are the reasons why our intercooler is a must-have upgrade:
With mesh dimensions of 580mm x 231mm x 110mm (stepped), our intercooler offers a 53% larger flow area and 52% more charge air volume compared to the factory intercooler. This means more air for your engine, resulting in a noticeable increase in performance. Our Competition high performance mesh has been specifically designed to provide excellent cooling characteristics. Whether you're on the track or on the road, your engine will always remain at the optimum operating temperature.
Despite its impressive performance, our intercooler is lightweight and weighs just 9.2 kg. This minimizes additional weight and ensures better vehicle dynamics. Our freeform cast aluminium end boxes have been CAD designed to maximize internal airflow. This significantly reduces the back pressure compared to the standard intercooler.
All our intercoolers are finished with an anti-corrosion coating which not only ensures longevity but also provides excellent heat dissipation properties. Our kit is completely ready to install and can be easily replaced with the factory intercooler. No complex adjustments required. Simply plug-and-play. Our intercooler has been tested under extreme conditions with up to 6 bar and is pressure stable. This upgrade is perfect for racing enthusiasts.
Maximize the performance of your Mini F54 Cooper S with our Competition high performance intercooler. Visit our website for more information and to order your kit.
Benefits:- improved cooling performance- 53% larger flow area- 52% more charge air volume- less back pressure- Plug & Play
Dimensions original intercooler:585mm x150mm x 95mmV=8.3 litersA=877.5 cm²
Wagner Tuning intercooler dimensions:580mm x 231mm x110mm /steppedV=12.6 litersA=1340 cm²
Scope of delivery:1 intercooler1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.
Turbo inlet | fits Toyota Yaris GR (P21) 261hp | Wagner Tuning
€190.00*
The improved Turbo Inlet (intake manifold) is suitable for the following vehicles:Toyota GR Yaris 1,6-L Turbo 192kW / 261hp (09/2020+)
Ready for the ultimate upgrade? Experience the optimum combination of performance and quality with the Wagner Tuning Turbo Inlet for your Toyota GR Yaris. Order now and find out more - your way to maximum performance and driving pleasure!
Discover the new Wagner Tuning Turbo Inlet for the Toyota GR Yaris: Maximum performance meets first-class quality!
The Wagner Tuning Turbo Inlet was specially developed for the Toyota GR Yaris and sets new standards in terms of air supply and performance optimization.
Our Turbo Inlet enables effortless plug-and-play replacement of the standard part. The original turbo inlet of the Toyota GR Yaris has severe restrictions that significantly impair the air mass flow to the turbocharger. The optimized design of our turbo inlet, which was developed with the help of CFD flow simulations, ensures the best possible air mass flow rate. The inner diameter has been increased from Ø48.5mm to Ø51mm, which corresponds to an increase in cross-section of almost 10%. This allows you to achieve a higher maximum output and improved response, especially with hybrid turbochargers.
Our turbo inlet is manufactured in Germany using the latest CNC technology and is made of high-strength aluminum alloy for maximum robustness and durability. The silver anodized surface also gives your engine compartment an appealing look.
Scope of delivery:1 x Turbo inlet (intake manifold)1 x silicone hose (reinforced version)1 x mounting materialAttention: Not approved in the area of the StVZO.
Side skirts Carbon | fits BMW X5M (F85) 575hp S63 | 3DDesign
€2,275.00*
The 3DDesign carbon side skirts for the F85 provide an ideal visual connection between the front lip and diffuser. The sills are supplied as a set, are made from genuine carbon fiber and can be fitted in next to no time.
Incl. parts certificate
Compatible vehicles:BMW X5 (F15, F85) M 2014-2018
Water cooler Race-Spec | fits BMW M3 incl. CSL (E46) S54 | CSF Race
€761.60*
CSF Race Water cooler for BMW E46 Triple Pass coolerFeatures CSF's exclusive B-Tube technology and 6.5mm multi-fin height, 1-hour polished mirror finish, CNC machined mounting brackets
True drop-in fit with no modifications requiredCSF manufactures the most advanced and efficient radiator cores in the industry by using innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation. These techniques allow CSF to stay ahead of the curve in radiator technology!
“B-Tube” technologyIn contrast to a normal oval “O” type radiant tube, CSF uses a specially developed tube in the shape of a “B”. These “B-Tubes” are carefully formed and then soldered over the seam to seal it. CSF is able to use thinner and lighter aluminum material (better cooling efficiency) because this design is actually stronger than normal welded “O” shape tubes.
The design (inlet in the center of the tube which is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over normal tubes. You get the efficiency of 2 smaller tubes versus 1 large tube with the same space criteria. With “B-Tubes” you can get “Dual Liquid Laminar Flow”.
High Efficiency Multi Louvered FinCSF uses high efficiency multi-louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured, calculated and tested in our wind tunnel lab for maximum heat dissipation efficiency for each application.
MaterialThe CSF Race-Spec water cooler is made of durable aluminum. This material is characterized by its excellent thermal conductivity, corrosion resistance and durability. This ensures a long service life for this part.
InstallationThanks to the replacement assembly, installation is as easy as with an original part. This means you can replace your old radiator with this CSF Race-Spec water cooler without any complications. In terms of both fit and installation technology, this radiator is the same as the original part and can therefore be installed without any modifications or adjustments.
Compatible vehicles:Make Model Type Year of manufactureBMW 3 Convertible (E46) M3 2001-2006BMW 3 Coupe (E46) M3 2000-2006BMW 3 Coupe (E46) M3 CSL 2003-2003