Performance increase via additional control unit | fits BMW X3M/X4M incl. Competition (F97/F98) S58

Actuator for exhaust flap OEM part number: 18307851568 (18 30 7 851 568) Suitable for the following BMW models with exhaust flap: F80 F82 F83 F85 F86 F87N F90 F91 F92 F93 F95 F96 F97 F98 G01 G02 G05 G06 G14 G15 G16 G20 G21 G22 G23 G26 G30 G42 G82 G83

The sports air filter for the F97 and F98 features a direct-fit design that does not interfere with your vehicle's ECU recognition and retains the original design. - Improved mileage - Reduced emissions - Cost-effective and quick upgrade - Extends the life of the engine - Increased performance - Improved airflow - Reusable, can be cleaned - Larger filter area     - Higher air permeability     - Not approved in the STVZO area OEM part number: 13729502014 Compatible vehicles: - X3 M / Competition (F97) - X4 M / Competition (F98)

Experience the fascinating world of carbon air intakes customised for the F97 and F98. These have been developed to give your vehicle a unique appearance.Unlike normal carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x SOOQOO air intakes Compatible vehicles:BMW X3M/ Competition (F97) FaceliftBMW X4M/ Competition (F98) Facelift Note: This is NOT an original BMW product!

Attention: Only compatible with vehicles with a production date from 01.12.2020!To check compatibility, we need the chassis number of the vehicle. Facts: - replaces the main catalyst - with 200 cell HJS stainless steel sports catalyst - Euro 6 compatible - for current OPF models - with Thermo-Integral insulation (at extra cost) - with ECE approval Compatible vehicles:VehicleVehicle typePower Engine capacityEngineYear of constructionBMW X3 (F97)M353kW / 480hp2993cm³S58 B30 A12.20 - Note: Depending on the software version, the engine control light may light up. We recommend the purchase of an OFF set module or software customisation.

Facts: - Tailpipes: 4x black - 3.0 inch (76mm) stainless steel - MSD removal - electric flaps - Made in Germany (Lake Constance) - with/without ECE approval (depending on choice of flap control)* Scope of delivery: - 1x Aulitzky Exhaust exhaust system from OPF - 4x black tailpipes - ECE handout Compatible vehicles:VehicleVehicle typePowerEngine capacityEngineYear of constructionBMW X3 (F97)M353kW / 480hp2993cm³S58 B30 A03.19 -BMW X3 (F97)M Competition375kW / 510hp2993cmS58 B30 A03.19 -BMW X4 (F98)M353kW / 480hp2993cm³S58 B30 A03.19 -BMW X4 (F98)M Competition375kW / 510hp2993cmS58 B30 A03.19 - *ATTENTION!In conjunction with the standard or ECE flap control (with type approval), this flap exhaust system has ECE approval so that it can be used legally within the scope of the StVZO without registration in the vehicle documents.The use of flap exhaust systems in conjunction with the race flap control (without approval) is not permitted for use on public roads and is only intended for racing purposes!  If you nevertheless install a product without approval in your vehicle and use it within the scope of the StVZO, you are liable to prosecution. Possible consequences that you can expect in this case: Expiry of the operating license according to §19 of the StVZO and a possible resulting immobilization of the vehicle. Other possible consequences, such as a charge of tax evasion, as well as possible investigations by the environmental authorities are at the discretion of the investigators.

Experience the world of carbon rear canards customised for the F97. These have been developed to give your vehicle a unique look.Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x set of SOOQOO canards Compatible vehicles:BMW X3M/ Competition (F97) Facelift Note: This is NOT an original BMW product!

Experience the fascinating world of carbon front canards customised for the F97/F98. These have been developed to give your vehicle a unique appearance.Unlike normal carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x set of SOOQOO front canards Compatible vehicles:BMW X3M/ Competition (F97) FaceliftBMW X4M/ Competition (F98) Facelift Note: This is NOT an original BMW product!

Transform your F97 into a high-performance powerhouse with the BlackBoost cooling air intake system. Experience more power, style and driving dynamics with this premium upgrade. In the world of performance modifications, the airbox is one of the most important engine components you should upgrade. The factory airbox is very restrictive in terms of airflow and filter area. Our cooling air intakes are designed and engineered to overcome these factory restrictions and deliver the maximum airflow with the lowest possible temperatures given the space available. The BlackBoost Cold Air Intakes are designed to be flush with the bonnet of the vehicle and ensure a consistent seal with the rubber seals of the airbox, whilst also ensuring a large surface area to work properly. The BlackBoost twin-flow filters are specifically designed to maximise airflow and surface area. The BlackBoost intake kit is a plug-and-play solution that works perfectly without further customisation and requires no additional software tuning. It also works smoothly in combination with turbo upgrades, downpipes, methanol injections etc. to unleash the necessary airflow and utilise the full capacity of the engine for those aiming for 1000+ WHP figures.Key Features:- Proven power increase from 8 to 30+ hp on production vehicles- Improved responsiveness across the entire rev range- Optimised airflow and increased volume range compared to standard equipment- Increased surface area of the filter elements- Can support airflow for 1000+ WHP configurations- Larger filter element surface area compared to OEM- Plug-and-play bolt-on installation- No ECU tuning required Compatible vehicles:BMW X3M (F97) 353kW | 480HP | 2993cm³ | S58BMW X3M (F97) Competition | 375kW | 510HP | 2993cm³ | S58 Attention: The intake can only be used in combination with the approved 670hp Stage and must be installed in an open configuration! The intake itself is not approved. Only with in-house installation!

For the F97/F98, we have chosen our usual strategy of combining discreet aesthetics with exceptional aerodynamic efficiency. The finished piece with the twill weave pattern is visually even more impressive than its standard counterpart, yet blends in perfectly with the M Performance design details.The front splitter developed by Sterckenn consists of three vertical bars that dramatically emphasize the aggressive appearance of the hot SUVs without compromising their usability. Consisting of three independent components, the splitter does not compromise the ground clearance of the bumper and is easy to fit thanks to its add-on design.The three-part design also offers the advantage of lower shipping costs.

3DDesign carbon front lip for F97 and F98 Compatible vehicles:BMW X3 (G01, F97) M Since 2019BMW X3 (G01, F97) M Competition since 2019BMW X4 (G02, F98) M since 2019BMW X4 (G02, F98) M Competition Since 2019

Experience the fascinating world of the carbon front spoiler customised for the F97/F98. This has been developed to give your vehicle a unique appearance.Unlike normal carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x SOOQOO front spoiler Compatible vehicles:BMW X3M/ Competition (F97) FaceliftBMW X4M/ Competition (F98) Facelift Note: This is NOT an original BMW product!

Facts:Acceleration time : 60-130mph reduced by 0.2 secondsBrand: EventuriMaterial: CarbonColor: Carbon blackParts certificate: A certificate is available for this product for certain regions and vehicles (details below) The OEM Intake, although awkward at first glance, is a very well thought-out system given the available space. The flow path from the filters to the turbo inlets is very direct and does not change direction as abruptly as the usual OEM airbox designs. So instead of a completely new design, we focused on improving the OEM airbox with less restrictive flow and improved temperature efficiency. We developed replacement filters made of non-woven fabric, which have a much higher flow rate compared to the paper filters. To lower air intake temperatures and force air into the airbox, we designed large front vanes that sit behind the grilles. The carbon vanes direct air into the ducts and effectively insulate the intake side of the airbox. The final piece is the carbon airbox lid, which doesn't increase performance, but allows for a more audible intake sound and gives the engine bay a much needed aesthetic improvement. The Eventuri intake system consists of a series of components designed for a specific purpose and manufactured to the highest standards. Here are the details for each component and the design ethos behind them: Each intake system consists of:1 x carbon fiber airbox cover2 x carbon air scoops4 x direct replacement high flow air filtersLaser cut stainless steel brackets Dyno data : Coming soon Parts certificateThe manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles:* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24Countries Model Type approval*DE/AT BMW X3M e1*2007/46*1988*..DE/AT BMW X3M Competition e1*2007/46*1988*..DE/AT BMW X4M e1*2007/46*1988*..DE/AT BMW X4M Competition e1*2007/46*1988*.. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW X3 (F97)M353kW / 480hp2993cm³S58 B30 A03.19 -BMW X4 (F98)M353kW / 480hp2993cm³S58 B30 A03.19 -

Facts: NOW WITH PARTS CERTIFICATE! Acceleration time : 60-130mph reduced by 0.2 seconds Brand: Eventuri Material: Carbon Colour: Carbon black Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) The F97/F98 OEM Intake, although awkward at first glance, is a very well thought-out system given the available space. The flow path from the filters to the turbo inlets is very direct and does not change direction as abruptly as the usual OEM airbox designs. So instead of a completely new design, we focussed on improving the OEM airbox with less restrictive flow and improved temperature efficiency. We have developed replacement filters made of non-woven fabric, which have a much higher flow rate compared to the paper filters. To lower air intake temperatures and force air into the airbox, we designed large front vanes that sit behind the grilles. The carbon vanes direct air into the ducts and effectively insulate the intake side of the airbox. The final piece is the carbon airbox lid, which doesn't increase performance, but allows for a more audible intake sound and gives the engine bay a much needed aesthetic improvement. The Eventuri intake system consists of a number of components designed for a specific purpose and manufactured to the highest standards. Here are the details for each component and the design ethos behind them: Each intake system consists of: 1 x carbon fibre airbox cover 2 x carbon fibre air scoops 4 x High flow direct replacement air filters Laser cut stainless steel brackets Dyno data : Coming soon Parts certificate The manufacturer's specifications apply for installation. The existence of a certificate is no guarantee that the product can be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24 Country ModelType approval* DE/AT BMW X3Me1*2007/46*1988*.. DE/AT BMW X3M Competition e1*2007/46*1988*.. DE/AT BMW X4M e1*2007/46*1988*.. DE/AT BMW X4M Competition e1*2007/46*1988*.. CH/LI BMW X3 M1BP684-1BP685 CH/LI BMW X4 M 1BP686-1BP687 Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of constructionBMW X3 (F97)M353kW / 480hp2993cm³S58 B30 A03.19 -BMW X4 (F98)M353kW / 480hp2993cm³S58 B30 A03.19 -

Eibach Pro-Kit performance suspension springs for front and rear axle E10-20-040-03-22 The Eibach Pro-Kit lowering springs are the ideal solution for your vehicle, as the kit lowers the centre of gravity, reduces rebound when accelerating, reduces body roll when cornering and dips when braking. As a result, understeer and oversteer no longer occur. Lowering the vehicle with the Pro-Kit springs reduces the standard distance between the tyres and the wheel arch and gives the vehicle a sporty look. In addition, the handling of the vehicle is maximised. The Eibach Pro-Kits are designed by Eibach suspension engineers and test experts to deliver a combination of sporty looks and performance without compromising on safety or ride quality. - Developed and tested for combination with standard and aftermarket dampers- Component of the Eibach Pro system- Top performance handling- Lowers the vehicle's centre of gravity by up to 40 mm (depending on the vehicle)- Spring design for traction and attraction- Progressive suspension characteristics- Performance handling- ABE or parts certificate Note: Only for vehicles without levelling control. Information:- Lowering front axle: approx. 25mm- Lowering rear axle: approx. 25mm- Type of approval: with expert opinion- Suspension: for all standard damping systems- Illustration may differ from the original Compatible vehicles:- Axle load front axle: up to 1185kg- Axle load rear axle: up to 1425kg- EC type approval number: e1*2007/46*1988*..- Only for vehicles without levelling system BMW X3 (F97) M 353kW / 480PS 7909-ACGBMW X3 (F97) M Competition 375kW / 510hp 7909-ACFBMW X4 (F98) M 353kW / 480PS 7909-ACHBMW X4 (F98) M Competition 375kW / 510hp 7909-ACI

Facts: Material: Carbon Manufacturer: Eventuri The Eventuri philosophy of challenging the standard for existing aftermarket solutions is also reflected in the panel filters. The best design, relentless testing to perfection and the latest prototyping methods result in an exceptional product. With the panel filters, the focus is on performance, which is guaranteed by CFD analyses, airflow tests, inlet temperatures and extensive dyno tests. Each panel filter is designed to fit into the OEM filter housings. Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction BMW X3 (F97)M353kW / 480hp2993cm³S58 B30 A03.19 -BMW X4 (F98)M353kW / 480hp2993cm³S58 B30 A03.19 -

Facts:- Plug & Play installation using illustrated installation instructions- Special wiring harness for your vehicle- High-quality electronics “Made In Germany”- Electronic components with product qualification for motor vehicles according to AEC-Q100 installed- Support from us as co-developer and manufacturer Scope of delivery:The scope of delivery includes the motorsport add-on module, an engine-specific wiring harness, illustrated installation instructions in DE/EN and a BYPASS connector, which you can use to restore your vehicle to series production. Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeYear of constructionBMW X3 (F97)M353kW / 480hp2993cm³S58 B30 A03.19 -BMW X3 (F97)M Competition375kW / 510hp2993cmS58 B30 A03.19 -BMW X4 (F98)M353kW / 480hp2993cm³S58 B30 A03.19 -BMW X4 (F98)M Competition375kW / 510hp2993cmS58 B30 A03.19 - LEGAL INFORMATION: THE INSTALLATION OF ADDITIONAL ELECTRONICS IS A STRUCTURAL MODIFICATION TO THE MANUFACTURER'S ELECTRONICS. WITHOUT REGISTRATION IN THE VEHICLE DOCUMENTS BY MEANS OF AN INDIVIDUAL CERTIFICATE FROM TÜV; DEKRA OR OTHER RECOGNIZED TESTING INSTITUTES, THE INSTALLATION WILL INVALIDATE THE OPERATING LICENSE. IF USED ON PUBLIC ROADS, THIS WILL RESULT IN THE LOSS OF INSURANCE COVER. WE DO NOT CURRENTLY HAVE A PARTS CERTIFICATE FOR YOUR VEHICLE. THEREFORE, THIS SYSTEM IS EXCLUSIVELY SUITABLE FOR MOTORSPORT. ATTENTION: IF YOU USE THE ADDITIONAL ELECTRONICS, YOU MAY LOSE YOUR WARRANTY CLAIMS AGAINST THE SELLER OR WARRANTY CLAIMS AGAINST THE MANUFACTURER. IF YOU HAVE ANY FURTHER QUESTIONS, PLEASE DO NOT HESITATE TO CONTACT US!

Service package: The AULITZKY app "do it yourself" + downpipe (incl. installation) + registration Get your app now to tune your car yourself or manage a selection of your finished maps, which have been individually tuned on our test bench, and flash them to your vehicle in no time at all. In addition to flashing your engine control unit, we also offer transmission programming. It is also possible to fully read and delete the fault memory. Your benefits at a glance: -software for ECU (engine control unit) -Software for TCU (transmission control unit) -Read fault memory -Delete fault memory -Datalogging -Tuning for Stage 1 & Stage 2 included -Custom maps possible -Stage 3 available on site for an additional charge Please note: From certain model years and variants, an OBD unlock or ECU unlock is required to ensure that your vehicle can be flashed via OBD. The OBD unlock can be carried out by sending the ECU to us or by our service centre partners at various locations in Germany. For the ECU unlock, we need the vehicle on site for approx. 1.5 - 2 weeks. *Note: Registration of the performance upgrade is ONLY possible in conjunction with our downpipe (AEDPM3G80).The downpipe is automatically included in this package. Compatible vehicles:VehicleTypePower outputEngine capacityEngineYear of constructionBMW 2 Series (G87)M2338kW / 460hp353kW / 480hp2993cm³S58 B30 A11.22 -08.24 -BMW 3 Series (G80)M3353kW / 480hp2993ccS58 B30 B11.20 -BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510hp390kW / 530hp2993ccS58 B30 A05.21 -07.24 -BMW 4 Series (G82)M4353kW / 480hp2993ccS58 B30 B11.20 -BMW 4 Series (G82/G83)M4 Competition / xDrive375kW / 510hp2993cm³S58 B30 A05.21 -BMW X3 (F97)M353kW / 480hp2993cm³S58 B30 A03.19 -BMW X3 (F97)M Competition375kW / 510hp2993cmS58 B30 A03.19 -BMW X4 (F98)M353kW / 480hp2993cm³S58 B30 A03.19 -BMW X4 (F98)M Competition375kW / 510hp2993cmS58 B30 A03.19 -

Experience the fascinating world of the carbon rear diffuser customised for the F97. This was developed to give your vehicle a unique appearance.Unlike normal carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x SOOQOO rear diffuser Compatible vehicles:BMW X3M/ Competition (F97) Note: This is NOT an original BMW product!

Experience the world of the lower carbon ducktail customised for the F97. This was developed to give your vehicle a unique look.Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x SOOQOO Ducktail Compatible vehicles:BMW X3M/ Competition (F97) Note: This is NOT an original BMW product!

Experience the fascinating world of the carbon ducktail customised for the F97. This was developed to give your vehicle a unique appearance.Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x SOOQOO Ducktail Compatible vehicles:BMW X3M/ Competition (F97) Note: This is NOT an original BMW product!

The carbon seat shell covers are a must for your vehicle and significantly enhance the interior! The easy-to-fit seat shell covers are made of Pre-Preg 2x2 carbon and perfectly match your interior. Details:- Made from pre-preg carbon fiber with a 3k 2x2 weave (OEM style)- Coated with a high gloss paint finish- 100% carbon construction to reduce weight to a minimum- Pre-applied HI-Bond adhesive tape for easy installation and secure attachment - Scope of delivery: 2x seat covers (set) for both front seats- registration-free Why Pre-Preg Carbon?There are a number of reasons why we recommend it to our customers: It's much stronger than regular carbon, which means longer durability and life in the long run. Spend a little more money now so you don't have to resort to replacements later because you mishandled your carbon and hurt its feelings. Pre preg carbon has a more consistent quality when it comes out of the mold, which means fewer issues or imperfections that would otherwise be undesirable in the finished product. The process eliminates air bubbles and more easily results in a smooth, shiny surface. This makes it an ideal part for your car. If weight savings are important to you, Pre-Preg is ideal as it is 70% lighter than alternative carbon parts. Compatible vehicles (only for BMW Comfort seats, see article image):BMW M2 (G87) 2023+BMW M3 (G80) 2021+BMW M4 (G82) 2021+BMW M3 (G80/G81) X Drive (2021+)BMW M4 (G82/G83) X Drive (from 2021)BMW X3M (F97)BMW X4M (F98)Note: This is NOT an original BMW product!

Made from Aircraft Grade T-6061 Aluminum, the Evolve Gear Shift Paddle Set puts you back in control of your M Performance vehicle, more feel and ease of use make the Evolve Gear Shift Paddle Set the superior choice over OEM paddles. Designed specifically for the M Performance steering wheel, the sleek Evolve Paddle Set follows the curves and lines of the steering wheel. Available in two finishes to complement the interior of your vehicle, you have the choice between Titanium and Dark Anthracite. We designed these paddle shifters with the racetrack in mind, so you can easily engage gears regardless of steering angle.In addition, the OEM control unit is retained and the entire paddle is replaced, this is not a stick-on version. Fits all F-Series & G-Series vehicles with the latest Gen.3 M Performance steering wheel:G87 M2G80/G81 M3G82/G83 M4F90 M5F91/F92 M8F97 X3MF98 X4MG01 X3G02 X4G05 X5G06 X6G07 X7G30 5 Series

Experience the fascinating world of the carbon side sill customised for the F97/F98. This was developed to give your vehicle a unique look.Unlike normal carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x SOOQOO side skirts Compatible vehicles:BMW X3M/ Competition (F97) FaceliftBMW X4M/ Competition (F98) Facelift Note: This is NOT an original BMW product!

The AULITZKY app “do it yourself” Get your app now to tune your car yourself or manage a selection of your finished maps, which have been individually tuned by us on the test bench, and flash them to your vehicle in no time at all. In addition to flashing your engine control unit, we also offer transmission programming. It is also possible to fully read and delete the fault memory. Your benefits at a glance:-software for ECU (engine control unit)-Software for TCU (transmission control unit)-Read fault memory-Delete fault memory-Datalogging-Tuning for Stage 1 & Stage 2 included-Custom maps possible-Stage 3 available on site for an additional charge Attention: From certain model years and variants, an OBD unlock or ECU unlock is required to ensure that your vehicle can be flashed via OBD.The OBD unlock can be carried out by sending the ECU to us or by our support partners at various locations in Germany. For the ECU unlock we need the vehicle in our workshop for approx. 1.5 - 2 weeks. -Stage 1: Pipercross air filter-Stage 2: additional downpipe, charge pipe-Stage 3: additional upgrade turbocharger, Dorch high-pressure pump, turbocharger inlet, exhaust system *Note: Registration of the performance upgrade is ONLY possible in conjunction with our downpipe (AEDPM3G80). Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of constructionBMW 2er (G87)M2338kW / 460hp353kW / 480hp2993cm³S58 B30 A11.22 -08.24 -BMW 3er (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 -BMW 3er (G80/G81)M3 Competition / xDrive375kW / 510hp390kW / 530hp2993cm³S58 B30 A05.21 -07.24 -BMW 4er (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 -BMW 4er (G82/G83)M4 Competition / xDrive375kW / 510hp2993cm³S58 B30 A05.21 -BMW X3 (F97)M353kW / 480hp2993cm³S58 B30 A03.19 -BMW X3 (F97)M Competition375kW / 510hp2993cmS58 B30 A03.19 -BMW X4 (F98)M353kW / 480hp2993cm³S58 B30 A03.19 -BMW X4 (F98)M Competition375kW / 510hp2993cm³S58 B30 A03.19 -

The high-quality carbon fibre performance front spoiler is an excellent addition to significantly enhance the style of your vehicle. Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- with parts certificate according to §19.3 Scope of delivery:- 1x carbon front splitter with mounting material Compatible vehicles:BMW G87 2 Series M2 (2023+) Note: This is NOT an original BMW product!

Features:- Eliminates heat build-up and lowers intake air temperatures for maximum performance under race conditions- Formula 1 performance grade core from PWR (2-row core with rolled tubes and inner fins)- 33 tubes vs. OEM 17- 3mm rolled tubes vs. OEM 7mm- 4.85 mm blade height compared to OEM 8 mm- CNC-machined billet end tanks with integrated Y-pipe connection to the throttle body- 100% TIG welded compared to OEM gaskets and crimped plastic end tanks for maximum durability in high boost applications- CNC-machined OEM-style intake/exhaust ports for exact fit with all OEM components- Advanced, lightweight design - weighs only 20 lbs. Total weight (9.07 kg)- True plug-and-play "drop-in fit" installation- R&D and performance testing by industry-leading Porsche tuning companies - M-Engineering, World Motorsports, GMG Racing and Gosha Turbo Tech- Manufactured in the USA at PWR North America How the new Porsche 992 intercooler system worksUnconventional to the typical single, side-mounted intercoolers behind the front door ducts found in previous water-cooled turbo models, the new 992 generation has relocated the intercooler system to the top of the engine bay. The fresh ambient air is now channelled into the intercooler system through redesigned intercooler ducts located under the boot lid. Cold, fresh air is drawn in by the charge air ducts, which are located on each side of the vehicle's rear side panelling. The air then flows into the inlet tanks on each side of the intercooler system module. The heat transfer process takes place as the charge air moves through the charge air cooler core and the ambient air from the upper charge air cooler ducts flows through the core and exits below the vehicle. The intercooled charge air from both cores is then combined in the single outlet reservoir in the centre section before entering the Y-pipe, which is connected to the engine's throttle body. The CSF advantageThe key feature of the CSF by PWR 992 Turbo/S intercooler system is the Formula-1 grade intercooler core. CSF's strategic relationship with PWR has enabled the use of this core, which is unlike any other in the performance aftermarket. Industry-leading dyno testing by M-EngineeringWorking with Jon and Mitch, the owners and lead tuners of M-Engineering, the OEM intercoolers were compared to the CSF High-Performance Intercooler System on World Motorsports' state-of-the-art wind tunnel dyno.Below are the graphs of the data from two test runs, one with the stock intercooler and one with the CSF High-Performance Intercooler. These tests started in 4th gear at 2500 rpm, went through a gear change to 5th and then to redline. The CSF intercooler system proved to be much more efficient over the entire rev range, especially at very high charge air temperatures (beginning of the run). The CSF intercooler system (left) compared to the OEM system (right), showing better results in intake air temperature (IAT) and intercooler efficiency while tested under hotter conditions. (The orange line in the CSF graph on the left shows the improved performance by approximately 25*F at the end of 5th gear) Due to the larger and more efficient cores, the CSF intercooler system showed a slightly higher pressure drop with a range of 0.5 to 1 psi more than the OEM system throughout the bench test. This is generally to be expected - more surface area, more resistance - but with increased cooling efficiency offered by the CSF intercooler system. Compatible vehicles:PORSCHE 911 (992) 3.8 Turbo (992430) Since 2020PORSCHE 911 (992) 3.8 Turbo S (992450) Since 2020PORSCHE 911 Cabriolet (992) 3.8 Turbo (992630) Since 2020PORSCHE 911 Cabriolet (992) 3.8 Turbo S (992650) Since 2020

The Competition intercooler kit fits the following vehicle:Ford Focus MK3 RS 257kW/350hp Ready for victory: The Wagner Tuning Competition high-performance intercooler for your Ford Focus Mk3. Do you strive for ultimate performance and unsurpassed power increase? Our Competition high performance intercooler is the answer you're looking for. Here's what you can expect: This intercooler offers mesh dimensions of 630mm x 215mm x 125mm and an impressive total volume of 16,931cm³. This means a staggering 10% larger flow area and a whopping 72% more charge air volume compared to the factory intercooler. Our competition high-performance mesh is specially designed to maximize cooling performance. Even under demanding conditions, this mesh ensures that your supercharged air stays as cool as possible. Despite offering impressive performance, our intercooler is surprisingly lightweight, weighing in at just 9.2 kg. This minimizes additional ballast and helps improve overall performance. The end boxes of the intercooler are made of cast aluminium and have been optimized in the CAD system using flow analyses. Integrated air baffles at the inlet ensure that the charge air cooler is filled evenly. The connection diameters at the inlet and outlet have been increased to a generous 70 mm. Our kit also includes two reinforced silicone hoses. The result: excellent cooling properties with minimal back pressure. This kit has been specially developed for racing and is the perfect choice for enthusiasts looking for top performance. It is fitted to the factory mounting points and is essentially a 1:1 replacement. Installation is straightforward and quick. Like all our products, our intercoolers undergo strict quality control. You can rely on the highest quality. Advantages of the Wagner Tuning intercooler:- Improved cooling performance- 10% larger inflow area- 72% more charge air volume- Inlet and outlet extended to 70mm- Original mounting point (plug & play) Prepare your Ford Focus Mk3 for victory. Install our Competition high performance intercooler today and experience the power it unleashes. For more information and to order, visit our website. Dimensions original intercooler:615mm x200mm x 80mmV=9.84 litersA=1230 cm² Wagner Tuning intercooler dimensions:630mm x 215mm x125mmV=16.9 litersA=1355 cm² Scope of delivery:1 intercooler2 silicone hoses1 mounting material1 assembly instructionAttention: Not approved in the area of the StVZO.

KW HLS Hydraulic Lift System For easy driving over various obstacles for sporty cars with low ground clearance More ground clearance at the touch of a button With the HLS lift system, you can raise your sports car or lowered vehicle to safely drive over obstacles such as speed bumps, speed humps, level crossings, construction sites, garage and underground parking garage entrances. Depending on the version of the HLS lift system installed, either the front axle or both axles of your vehicle are raised hydraulically by up to 45 millimetres. This prevents your aerodynamic components, underbody protection or even the oil pan from being damaged. Depending on the vehicle type and model, the lift system is available as a vehicle-specific solution with or without KW coilover suspension. If your vehicle is not yet included in our KW HLS product range, our engineers have also developed a universal lift system. Convincing solution made by KW Our HLS is available as an application-specific solution for a wide range of super sports cars and even for compact models. All the components supplied, such as the hydraulic lines and hydraulic pump, are adapted to your vehicle and therefore all our components harmonize perfectly with your sports car. Whether you combine the HLS with your standard suspension or with our KW coilovers in stainless steel, which are among the world's top aftermarket products, is up to you to decide. Alpina, BMW M, Manthey, Mercedes-Benz AMG, Novitec Rosso and many other well-known companies in the international automotive industry have already opted for KW. The "HLS 2" version of the lift kit, which is only installed on the front axle, allows you to lift the front of your sports car. If you opt for the "HLS 4" variant, your entire vehicle will be lifted. For this purpose, a hydraulic cylinder is mounted between the spring plate and spring on each KW coilover strut. The great advantage of the hydraulic system is that there is no compression (movement) of the extended cylinder unit during driving (no unwanted additional suspension) and therefore the driving dynamics cannot be impaired. The scope of delivery for all HLS Lift Kit variants also includes a control unit that is connected to the vehicle's on-board electronics. As a result, the vehicle is automatically lowered to the original depth of the KW coilover suspension or your standard suspension from a certain speed. - as a complete solution including KW coilover suspension - or available as a retrofit kit - Actuation from inside the vehicle via button with LED position indicator or optionally via radio remote control - Can be activated while driving (up to 80 km/h) - Quick lifting in 4-5 seconds with HLS 2 - Absolutely corrosion-resistant (coated aluminum cylinder components) Please note the conditions and instructions for this product: - VA + HA height-adjustable (threaded struts) - Vehicles with electronic damper control must be decommissioned. Vehicle-specific KW decommissioning kits can be found in the accessories table. - The dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted if the piston rod is accessible. - Aluminum struts (no Inox-line) Technical info: Lowering VA/HA (mm): 10-25/15-35 Version: HLS 2 Mounting position hydraulics: VA Material coilover suspension: aluminum Height adjustment: rebound and compression Adjustment VA/HA: thread/thread Approval: parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI R8 (4S) 4S3, 42 07/2015- 5.2 FSI Coupe Petrol 419 KW 5204 ccm 10 Rear-wheel drive AUDI R8 (4S) 4S3, 42 07/2015- 5. 2 FSI quattro Coupe Petrol 397 KW 5204 ccm 10 All-wheel AUDI R8 (4S) 4S3, 42 07/2015- 5.2 FSI quattro Coupe Petrol 419 KW 5204 ccm 10 All-wheel AUDI R8 (4S) 4S3, 42 07/2015- 5.2 FSI quattro Coupe Petrol 449 KW 5204 ccm 10 All-wheel AUDI R8 (4S) 4S3, 42 07/2015- 5. 2 FSI quattro Coupe Petrol 456 KW 5204 ccm 10 All-wheel drive AUDI R8 (4S) 4S3, 42 07/2015- 5.2 FSI RWS Coupe Petrol 397 KW 5204 ccm 10 Rear-wheel drive AUDI R8 (4S) 4S3, 42 07/2015- 5. 2 GT Coupe Petrol 456 KW 5204 ccm 10 Rear-wheel drive AUDI R8 (4S) Spyder 4S9, 42 05/2016- 5.2 FSI Cabriolet Petrol 419 KW 5204 ccm 10 Rear-wheel drive AUDI R8 (4S) Spyder 4S9, 42 05/2016- 5. 2 FSI quattro Cabriolet Petrol 397 KW 5204 ccm 10 All-wheel drive AUDI R8 (4S) Spyder 4S9, 42 05/2016- 5.2 FSI quattro Cabriolet Petrol 419 KW 5204 ccm 10 All-wheel drive AUDI R8 (4S) Spyder 4S9, 42 05/2016- 5.2 FSI quattro Cabriolet Petrol 449 KW 5204 ccm 10 All-wheel drive AUDI R8 (4S) Spyder 4S9, 42 05/2016- 5.2 FSI quattro Cabriolet Petrol 456 KW 5204 ccm 10 All-wheel drive AUDI R8 (4S) Spyder 4S9, 42 05/2016- 5.2 FSI RWS Cabriolet Petrol 397 KW 5204 ccm 10 Rear-wheel drive