Intake system Carbon | fits BMW X3M/X4M (F97/F98 LCI) 480hp S58 | Eventuri

Facts: Material: Carbon Manufacturer: Eventuri Expertise: Material Expertise Compatible vehicles:VehicleVehicle typePower outputDisplacementEngine type Audi A4 (B8/8K)RS4 quattro331kW / 450PS4136ccCFSA

Your vehicle is missing a data display! We have - the CANchecked display for E34.Access to all engine data:The sensors are queried directly via Can Bus and are displayed on our tried-and-tested MFD28. The display for the E-series comes with a vehicle-specific cover and fits into the interior like an original part. This means that the ventilation remains intact through the slots. Our display emulates a manufacturer tester so that all detailed values are available. We have optimised the protocol to achieve maximum polling speed. Details:- integrates perfectly into the vehicle interior- Up to 128 sensors can be interrogated- 10 individually configurable views with our DSS - Display Setup Software- ready-made views for a quick start with our display- simply plug and play via our cable set - plug in, done- 4 additional analogue inputs for exhaust gas temperature, oil pressure and more- Best readability - optional anti-reflective film included- Query the sensors like manufacturer diagnostic tools Performance metre:Measure your acceleration times in our performance widget - 0-100, 100-200, 0-200 Data jogging:Log all data to the internal SD card. Whether "on-demand" (start with a tap) or permanently. All data from your last turn is saved. Preset alarms:Preset alerts can be easily activated and customised. For example, receive a large warning message if the exhaust gas temperature is above 900 degrees. 4 additional analogue inputs:Additional temperature and/or pressure sensors can be connected for further monitoring options. e.g. exhaust gas temperature or exhaust gas back pressure. An ethanol sensor can be connected to one of the digital inputs. Read out/delete errors:Read out errors from the engine control unit in plain text and also delete them Customised designWhether it's the customised start screen or the selection from a variety of different widgets. Make the display your display!Driver Dynamics:We have developed a special view for all track drivers who want to further improve their driving style and become a second or two faster:- G-forces (lateral and longitudinal acceleration)- Vehicle speed- Steering angle- Accelerator pedal position- Brake pressure This sensor system gives the driver the opportunity to aim for even higher speeds in bends and to hit the braking point even later. Together with the data log in the internal memory, which can be downloaded from the display after a track day, this offers a great opportunity to synchronise the data with a video. Access to all data from the engine control unit:We supply your display with a ready-made TRI file as standard. All sensors that are queried are defined here. Temperatures:Engine water temperature, oil temperature, intake temperature, exhaust temperature, transmission temperature Pressures:Boost pressure, boost pressure target, fuel pressure high pressure pump, exhaust back pressure, low pressure, brake pressure, oil pressure Lambda/mixture:Lambda value target/actual, injection correction, short-term lambda adjustment, total ignition angle Other data:RPM, air mass (g/s), vehicle speed, throttle valve angle, battery voltage, gear, accelerator pedal position, longitudinal and lateral acceleration, steering angle, yaw angle, torque, power, boost pressure control valve activation If values are missing, they can easily be added. It always depends on the engine whether it supports the values, sometimes not all sensors are available. Attention: Not all values are available for all engines! For which engines and models is the display for E34:The display bezel fits the following E models:- M30, M60- S38- Other engines on requestRead out and delete errors:Swipe down to access the "DTC" (Diagnostic Trouble Codes = fault memory). The display reads the fault memory from the engine. Optionally, you can also delete these directly on the display. Errors for the engine are displayed in plain text so that you can decide for yourself whether you can continue driving. MFD28 Technical data:- Dimensions: 70.3 x 52mm - Hardware: 2.8" TFT screen, touchscreen, MicroSD, MicroUSB- High-quality milled aluminium front frame- Symmetrical display - ideal for rotating it by 90°- Views completely freely configurable on the PC with our DSS - Display Setup Software- Up to 64 widgets per display- 64 sensors (Can Bus + internal)- 10 views- 4x analogue inputs- Optional external switching flash- Can bus switching- Can Bus protocols: UDS, KWP2000, OBD Supported values:Many customers always ask: "Which values can I query from my control unit? The answer: "ALL". Our MFD28 is compatible with ISO 11898-2 and SAE J2284.The control unit manufacturers themselves determine which values are sent via the CAN bus interface. The documentation is important here - possibly even in the form of a DBC file that can be imported directly. You can also access our extensive list of already implemented control units. This can be found in the download area. A total of up to 50 sensors can be queried if the manufacturer supports this.Broadcast data as well as OBD2 queries via Can Bus (11bit/29bit) are implemented. Special protocols such as TP2.0 from VW/Audi and UDS are also available. DSS - Display Setup Software:With our DSS - Display Setup Software, the display can be conveniently configured on the PC. The Can Bus protocol can be customised, you can import DBC files and design the displays with your own widgets.The log viewer downloads log files from the display. These can then be viewed and values can be individually selected and scaled.An in-built Can Bus logger allows you to take a close look at the log. This can be used to reverse-engineer unknown Can Buses.

Suitable for the following models (only in conjunction with the Airconcept rear wing): BMW 2 Series (F22) Coupe M2 (F87) BMW 4 Series (F32) Coupe M4 (F82) Increases the position of the wing by 125 mm. Objective: real trackday tool! - made from cnc-milled aluminium - the wing remains adjustable in three stages - installation and adjustment in seconds without tools - registration capable!

The Wagner Tuning Competition intercooler kit is suitable for:Audi A6 C8 45TDI 170KW/231hp (2018+)Audi A6 C8 50TDI 210KW/286hp (2018+)Audi A7 C8 45TDI 170KW/231hp (2018+)Audi A7 C8 50TDI 210KW/286hp (2018+) Unleash the full potential of your vehicle with the Wagner Tuning Competition high-performance intercooler. With its impressive technical data, this intercooler sets new standards in terms of performance and cooling. The Competition high-performance intercooler impresses with generous mesh dimensions of 550mm x 445mm x 70mm, which corresponds to a total volume of 17,130cm³. Thanks to this impressive size, it offers a 134% larger inflow area and a 105% increase in charge air volume compared to the standard intercooler. The high-quality Tube Fin mesh with internal turbulators ensures optimum air flow and maximum cooling performance. Despite its impressive dimensions, the total weight of the intercooler is just 9.5 kg, which saves weight and improves vehicle dynamics. The cast aluminium end boxes of the charge air cooler have been optimized with the help of flow analyses in the CFD system in order to achieve outstanding cooling performance with minimum back pressure. The connection diameters at the charge air cooler inlet are Ø62 mm and at the charge air cooler outlet Ø67 mm to ensure optimum flow efficiency. Another highlight is the anti-corrosion coating with excellent heat conduction properties, which is added to all our intercoolers. This ensures permanent and optimum cooling with a significant increase in performance. The intercooler kit is completely ready to install and can be easily replaced with the standard intercooler - simply plug and play. It has been tested up to 6 bar and is pressure-stable, so you can rely on its reliability. Our products are subject to constant quality monitoring to ensure the highest standards. The Competition high-performance intercooler is specially designed for racing and opens up a new dimension of performance. Take your vehicle to the next level with the Competition high-performance intercooler. Experience impressive cooling performance, improved power delivery and outstanding reliability every time you drive. Advantages:- Improved cooling properties- 134% larger inflow area- 105% more charge air volume- Intercooler inlet Ø62mm and intercooler outlet Ø67 mm- Plug & Play Dimensions original intercooler:720mm x 145mm x 80mmV=8.35 litersA=1044 cm² Wagner Tuning intercooler dimensions:550mm x 445mm x 70mmV=17.13 litersA=2447 cm² Scope of delivery:1 intercooler (black coated)1 silicone hose (black)1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.

Suitable for the following models:BMW F87 M2 Competition 302kW/411hp With parts certificate! The 3.0 liter S55B30 turbo engine is equipped with an indirect charge air cooling circuit. This means that the charge air is not cooled using the ambient air as a cooling medium (as usual), but with the aid of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water coolers come into play. The newly developed competition racing nets of the WAGNERTUNING high-performance water coolers increase the radiator volume of the standard water cooler by 89% for the front and 94% for the side. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the adjacent components (e.g. the engine water cooler located behind it) sufficient air flow for heat exchange. Furthermore, the increased cooling water volume allows the entire system thermal to be kept at a lower level over a longer period of time. All WAGNERTUNING water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. The installation of the system is also uncomplicated and almost plug & play with the help of our installation instructions. Dimensions OEM water cooler (front):590 mm x 308 mm x 25 mmV = 4.5 litersA = 1817 cm² WT water cooler dimensions (front):568 mm x 468.4 mm x 32 mmV = 8.5 liters (+89%)A = 2660.5 cm² (+46.4%) OEM water cooler dimensions (side):250 mm x 165 mm x 40 mmV = 1.65 litersA = 412.5 cm² WT water cooler dimensions (side):252 mm x 188 mm x 68 mmV = 3.2 liters (+94%)A = 473.8 cm² (+14.9%) Scope of delivery:1x front water cooler (low-temperature circuit)1x side water cooler (low-temperature circuit)1x carbon air duct for the side water cooler1x mounting material1x installation instructions1x parts certificate With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).