Lowering springs Pro-Kit Performance VA+HA 25mm | fits BMW X3M/X4M incl. Competition (F97/F98) S58 | Eibach

Eibach Pro-Kit performance suspension springs for front and rear axle E10-20-049-01-22 The Eibach Pro-Kit lowering springs are the ideal solution for your vehicle, as the kit lowers the centre of gravity, reduces rebound when accelerating, reduces body roll when cornering and dips when braking. As a result, understeer and oversteer no longer occur. Lowering the vehicle with the Pro-Kit springs reduces the standard distance between the tyres and the wheel arch and gives the vehicle a sporty look. In addition, the handling of the vehicle is maximised. The Eibach Pro-Kits are designed by Eibach suspension engineers and test experts to deliver a combination of sporty looks and performance without compromising on safety or ride quality. - Developed and tested for combination with standard and aftermarket dampers- Component of the Eibach Pro system- Top performance handling- Lowers the vehicle's centre of gravity by up to 40 mm (depending on the vehicle)- Spring design for traction and attraction- Progressive suspension characteristics- Performance handling- ABE or parts certificate Note: Only for vehicles without levelling control. Information:- Lowering front axle: approx. 20mm- Lowering rear axle: approx. 20mm- Type of approval: with expert opinion- Suspension: for all standard damping systems- Illustration may differ from the original Compatible vehicles:- Axle load front axle: up to 1165kg- Axle load rear axle: up to 1270kg- EC type approval number: e1*2018/858*00003..- Only for vehicles without levelling system BMW 4 (G82) M4 353kW / 480PS 7909-ACWBMW 4 (G82) M4 Competition 375kW / 510hp 7909-ACXBMW 4 (G82) M4 Competition M 375kW / 510hp 7909-ADABMW 4 (G83) M4 Competition M 375kW | 510hp 7909-ADB

Eibach Pro-Kit performance suspension springs for front and rear axle E10-20-045-05-22 The Eibach Pro-Kit lowering springs are the ideal solution for your vehicle, as the kit lowers the centre of gravity, reduces rebound when accelerating, reduces body roll when cornering and dips when braking. As a result, understeer and oversteer no longer occur. Lowering the vehicle with the Pro-Kit springs reduces the standard distance between the tyres and the wheel arch and gives the vehicle a sporty look. In addition, the handling of the vehicle is maximised. The Eibach Pro-Kits are designed by Eibach suspension engineers and test experts to deliver a combination of sporty looks and performance without compromising on safety or ride quality. - Developed and tested for combination with standard and aftermarket dampers- Component of the Eibach Pro system- Top performance handling- Lowers the vehicle's centre of gravity by up to 40 mm (depending on the vehicle)- Spring design for traction and attraction- Progressive suspension characteristics- Performance handling- ABE or parts certificate Note: Only for vehicles without levelling control. Information:- Lowering front axle: approx. 30mm- Lowering rear axle: approx. 25mm- Type of approval: with expert opinion- Suspension: for all standard damping systems- Illustration may differ from the original Compatible vehicles:- Axle load front axle: up to 1120kg- Axle load rear axle: up to 1360kg- EC type approval number: e1*2007/46*2017*..- Only for vehicles without levelling system BMW 3 Series Touring (G21) year of construction 07.19- M340i xDriveM340i Mild-Hybrid xDrive330i xDrive320d xDrive320d Mild Hybrid xDrive330d330d Mild Hybrid

KW coilover suspension DDC "Plug & Play" The "Plug & Play" solution for vehicles with standard electronic damper adjustment.KW also offers you the possibility to combine the active standard damper control of your sporty vehicle with the stainless steel KW DDC Plug & Play coilover suspension. This means that you can continue to use the existing active damper control in your car such as the VW Scirocco, VW Golf VI, VW Passat, BMW Dreier and other models in conjunction with a continuously variable lowering system.The best thing about it: Apart from replacing the adaptive standard suspension with the KW DDC Plug & Play coilover suspension, no further conversion steps or even modifications to the on-board electronics are necessary. The adaptive KW dampers are simply connected to the original connectors of your car manufacturer via the KW DDC plug connection. The standard control unit then takes over the regulation and control of the KW DDC Plug & Play coilover suspension. Perfect symbiosis of an OEM control unit with the advantages of an adaptive KW coilover suspensionOur suspension technology is compatible with the electronics of various car manufacturers. This means that the adaptive KW DDC Plug & Play coilover suspension is immediately recognised by the on-board electronics. All displays and controls of your standard vehicle remain fully functional and combine the advantages of an adaptive damping system with the stylish and sporty lowering of a high-quality KW coilover suspension. Thanks to the exclusive use of rust-free stainless steel and durable components, the functionality of the rust-free KW coilovers is maintained under all weather conditions. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, adjustment is also possible after a snowy winter, for example. No oxidation occurred on the KW threaded spring legs during a salt spray test. This means that the adjustment of the stepless lowering is not affected even after years. - the plug & play solution for sportiness or more ride comfort at the touch of a button with outstanding looks thanks to stepless lowering- Compatible with the standard suspension control unit- Vehicle-specific damper set-ups such as Comfort / Normal / Sport- Operation via series buttons in the interior Please note the conditions and instructions for this product:- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper)- Only for vehicles with electronic damper control Technical information:Lowering VA/HA (mm): 20-40/25-45Level change (mm) between: VA and / HA andVersion: DDC - Plug & PlayHardness adjustment: Rebound and compression dampingMaterial: Stainless steelAdjustment VA/HA: thread/threadApproval: Parts certificate (§19.3) Compatible vehicles:AUDI A3 Sedan (GY) 8YS 04/2020- RS3 quattro notchback petrol 294 KW 2480 ccm 5 all-wheel driveAUDI A3 Sedan (GY) 8YS 04/2020- RS3 quattro notchback petrol 299 KW 2480 ccm 5 all-wheel driveAUDI A3 Sportback (GY) 8YA 11/2019- RS3 quattro hatchback petrol 294 KW 2480 ccm 5 all-wheel driveAUDI A3 Sportback (GY) 8YA 11/2019- RS3 quattro hatchback petrol 299 KW 2480 ccm 5 all-wheel drive

Plug and Play suitable for the following models: BMW G87 M2 338kW/460hp from 2023+ BMW G80/81 M3 (Competition) 353-375KW/480-510hp from 2021+ BMW G82 M4 (Competition/CSL) 353-405KW/480-550hp from 2021+Now with parts certificate! The 3.0L R6 biturbo engine (S58) is equipped with an indirect charge air cooling circuit. This means that the charge air cooling process is not realised using the ambient air as a cooling medium (as usual), but with the help of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water cooler come into play. The newly developed competition racing mesh of the WAGNERTUNING high-performance water cooler increases the radiator volume of the standard water cooler by a total of 60 %. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the neighbouring components (e.g. the engine water cooler behind it) sufficient airflow for heat exchange. Furthermore, the water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. Installation of the system is also straightforward and plug & play with the help of our installation instructions. OEM water cooler dimensions: 505 mm x 605 mm x 30 mm V = 9.16 litres A = 3055 cm² WT water cooler dimensions: 505 mm x 605 mm x 48 mm V = 14.67 litres A = 3055 cm² With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

Vorsteiner 570-VX Aero Carbon front bumper with front splitter for McLaren 570S Expertise: Material certificate Compatible vehicles:MCLAREN 570S 3.8 Since 2015MCLAREN 570S Spider 3.8 since 2017

ST X COILOVERS The ST X coilovers allow moderate to eXtreme lowering thanks to the infinitely variable thread adjustment. Based on the know-how of KW, the market leader for individual suspension solutions, the ST X coilovers impress with their quality and driving dynamics. The ST X coilovers made by KW can be quickly and easily adjusted in the lowering level via the trapezoidal thread on the galvanized and multi-sealed spring strut. To do this, the ST polyamide threaded spring washer is turned up or down when installed. The adjustment range is different for each vehicle, for example between 35 and 65 mm on the front and rear axle of the Audi A3. On a vehicle that is already relatively low as standard, such as the BMW 3 Series (E9x), individual lowering in the range of 30 to 60 mm at the front and 25 to 55 mm at the rear can be achieved with the ST X coilover suspension. For vehicles with non-wheel-drive double wishbone rear axles, the lowering is set using the ST X coilover suspension rear axle height adjustment. A damper setup for more driving pleasureWith the damper setup used by ST Suspensions in collaboration with KW, the focus is on a sporty set-up. This reduces the typical roll and body roll movements during compression. A vehicle equipped with an ST coilover suspension responds more directly to all driving maneuvers and is significantly more agile when driving. For example, the nose of the vehicle dips less during braking maneuvers and the handling characteristics increase. The high-quality workmanship of the ST X coilovers includes a low-friction and pressure-resistant housing as well as a chrome-plated piston rod. The monoblock guide and seal package, which protects the twin-tube damper from the ingress of dirt particles, also ensures long-lasting driving pleasure. Lowering with STil: the ST X coiloversThanks to their high-quality workmanship, the balanced damper tuning and the easy adjustability of the infinitely variable lowering, the ST X coilover suspensions made by KW are the ideal coilover suspension for tuning enthusiasts: - Individual lowering within the tested adjustment range- VA and HA (if technically possible) with threaded adjustment- Galvanized coilover struts with additional sealing for optimized corrosion protection- Complete solution with adjustable spring plate, spring system and stop elements with dust protection system- High-performance 2-tube damper with high-quality components for a long service life Please note the conditions and instructions for this product:- For vehicles with factory lowering, the specified lowering rate is reduced by the amount of factory lowering Technical information:Lowering VA/HA (mm): 30-50/30-50Design: XHeight adjustment: noneMaterial: Galvanized steelAdjustment VA/HA: thread/threadApproval: Parts certificate (§19.3) Compatible vehicles:Manufacturer Model Version Body Fuel Performance Displacement Cylinder DriveAUDI A1 Sportback (GB) GBA 07/2018- 25 TFSI hatchback petrol 70 KW 999 ccm 3 front-wheel driveAUDI A1 Sportback (GB) GBA 07/2018- 30 TFSI Hatchback Petrol 81 KW 999 ccm 3 Front-wheel driveAUDI A1 Sportback (GB) GBA 07/2018- 30 TFSI Hatchback Petrol 85 KW 999 ccm 3 Front-wheel driveAUDI A1 Sportback (GB) GBA 07/2018- 35 TFSI Hatchback Petrol 110 KW 1495 ccm 4 Front-wheel driveAUDI A1 Sportback (GB) GBA 07/2018- 40 TFSI Hatchback Petrol 147 KW 1984 ccm 4 Front-wheel driveAUDI A1 Sportback (GB) GBA 07/2018- 40 TFSI hatchback Petrol 152 KW 1984 ccm 4 front-wheel driveVW POLO VI (AW, AW1, BZ1) 06/2017- 2.0 GTI Hatchback Petrol 147 KW 1984 ccm 4 front-wheel driveVW POLO VI (AW, AW1, BZ1) 06/2017- GTI Hatchback Petrol 152 KW 1984 ccm 4 Front-wheel driveSKODA SCALA (NW) 02/2019- 1.0 TSI Hatchback Petrol 70 KW 999 ccm 3 Front-wheel driveSKODA SCALA (NW) 02/2019- 1.0 TSI Hatchback Petrol 81 KW 999 ccm 3 Front-wheel drive SKODA SCALA (NW) 02/2019- 1.0 TSI Hatchback Petrol 85 KW 999 ccm 3 Front-wheel driveSKODA SCALA (NW) 02/2019- 1.5 TSI Hatchback Petrol 110 KW 1495 ccm 4 Front-wheel driveSKODA SCALA (NW) 02/2019- 1.6 TDI Hatchback Diesel 70 KW 1598 ccm 4 Front-wheel driveSKODA SCALA (NW) 02/2019- 1.6 TDI Hatchback Diesel 85 KW 1598 ccm 4 front-wheel drive