Seat shell cover Carbon | fits BMW M2/M3/M4/X3M/X4M (G80/G81/G82/G83/G87/F87/F98) | Aulitzky Tuning

MOVIT DDE steel brake system 380x32mm (6 piston calliper) for the front axle, from 19 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined. The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications. The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple layer of paint.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts Attention: The conversion means that only rims with at least 19 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. MOVIT sports brake callipers, 6-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force MOVIT sports brake discs, 380x32mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Highest fading resistance- Special alloy for high thermal conductivity MOVIT comfort brake pads- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x assembly material1x installation instructions and running-in instructions1x parts certificate Compatible vehicles:BMW 5 Series (E60) M5 373kW / 507PS / 4999cm³ / S85BMW 6 Series (E63) M6 373kW / 507PS / 4999cm³ / S85

MOVIT DDE steel brake system 342x28mm (4 piston calliper) for the front axle, from 18 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined. The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications. The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple layer of paint.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts Attention: The conversion means that only rims with at least 18 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. MOVIT sports brake callipers, 4s6, 4-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force MOVIT sports brake discs, 342x28mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Maximum fading resistance- Special alloy for high thermal conductivity MOVIT brake pads, comfort BE-4s6- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x assembly material1x installation instructions and running-in instructions1x parts certificate Compatible vehicles:Audi S1 8XVW Polo 6R WRC

Transform the engine bay of your G8X with the pre-impregnated carbon replacement radiator shroud. Made from lightweight pre-preg carbon fibre. When you buy pre-preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run. Assembly: Plug&Play Details:- 100% carbon fibre construction- High gloss finish- Performance style design- Supplied with 3M double-sided adhesive tape already attached- Use rubber adapter from the original engine cover + emblem- registration free Compatible vehicles with S58 engine:- BMW G87 M2 - BMW G80 M3 Sedan (2021+)- BMW G80 M3 Competition Sedan (2021+)- BMW G81 M3 Touring (2023+)- BMW G81 M3 Competition Touring (2023+)- BMW G82 M4 Coupé (2021+)- BMW G82 M4 Competition Coupé (2021+)- BMW G83 M4 Convertible (2021+)- BMW G83 M4 Competition Convertible (2021+) Note: This is NOT an original BMW product!

The exterior mirror covers in glossy pre-preg carbon fibre give your standard mirror units a more premium look. Unlike regular carbon fibre, Pre-Preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Guaranteed fit- registration free Scope of delivery:- 1x pair of mirror caps Compatible vehicles:BMW M5 (G90)BMW M5 (G99)BMW 5 Series (G60)BMW 5 Series (G61)BMW 5 Series (G68)BMW i5 (G60)BMW 7 Series (G70) Note: This is NOT an original BMW product!

Suitable for the following vehicles:Audi TT 8S 45 TFSI 2.0 TSI (EA888 Gen.4 DNP) 180kW / 245hpVW Golf VIII Type CD2.0 GTI (EA888 Gen.4 DNP) 180kW / 245hpVW Tiguan AD (FL) 2.0 TSI (EA888 Gen.4 DNP) 180kW / 245hpSkoda Octavia NX 2.0 TSI RS (EA888 Gen.4 DNP) 180kW / 245hpSkoda Kodiaq 2.0 TSI RS (EA888 Gen.4 DNP) 180kW / 245hpCupra Leon KL 2.0 TSI (EA888 Gen.4 DNP) 180kW / 245hpCupra Formentor VZ 2.0 TSI (EA888 Gen.4 DNP) 180kW / 245hp The Wagner Tuning Turbo Outlet has been specially developed for vehicles with the EA888 Gen.4 engine and Garrett turbocharger to optimise performance and response. With an innovative design and high-quality materials, this turbo outlet offers a plug-and-play solution for a wide range of vehicle models, including Audi, VW, Skoda and Seat. The Wagner Tuning Turbo Outlet is the ideal choice for discerning vehicle enthusiasts who want to get maximum power and performance from their vehicles.Optimised air mass flow: The Turbo Outlet has been developed using CFD flow simulations to maximise air mass flow and increase performance. Plug-and-play installation: Easy installation thanks to the plug-and-play design that allows direct replacement of the standard part. Reduction of turbulence: By increasing the internal diameter to Ø48mm, turbulence is minimised, resulting in improved airflow and optimised responsiveness. High-quality materials: CNC-machined from high-strength aluminium alloy and anodised black for durability and aesthetics.Made in Germany: Manufactured in Germany to the highest quality standards. Scope of delivery:1 x Turbo outlet (exhaust nozzle) With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

The carbon side skirts offer a huge improvement to the side profile of your vehicleThe SK1 are specifically designed to enhance the road presence of the G8X with a lower, wider and more aggressive look. The sills fit under the factory gloss black side seals and give the vehicle a sleek carbon fibre look, with a profile that matches the SP1 front splitter. The SP1 utilises the original mounting locations on the underside of the vehicle and mirrors the design of the bumper for an OEM fitment. The product is supplied ready to fit. The new G8X platform does not use threaded bolts in the side seal area. Therefore, we have specified the correct length of stainless steel screws to attach the side skirts to your vehicle. Details:- 100% pure prepreg carbon fibre construction- X-style design- High gloss finish- Guaranteed fit- Quick and easy installation- Supplied with pre-assembled 3M double-sided adhesive tape- Includes all necessary parts- Installation: Is screwed under the black side seals- Registration according to §21 possible Compatible vehicles:- BMW G80 M3/ Competition Sedan (2021+)- BMW G81 M3 Competition Touring (2021+)- BMW G82 M4/ Competition Coupe (2021+)- BMW G83 M4 Competition Convertible (2021+)Note: This is NOT an original BMW product!