Charge pipe kit Ø66mm | fits Audi S4/S5 (B9/8W/F5) 3.0 TFSI 354hp | Wagner Tuning

The Competition intercooler kit is suitable for:Audi S4 B9 8W 3,0TFSI 260KW/354hp (2016+)*Audi S5 B9 F5 3,0TFSI 260KW/354hp (2016+)** The brackets supplied are only suitable for the EU model. Maximize the performance of your vehicle with our Competition high performance intercooler! Looking for a way to boost your vehicle's performance and efficiency? Our Competition high performance intercooler is the answer. Here's what you can expect from this exceptional product:Our high performance intercooler redefines the standards for performance. With net dimensions of 550 mm x 445 mm x 70 mm (equivalent to 17,130 cc), it offers an impressive 134% larger flow area and 105% more charge air volume compared to the conventional intercooler. This means that your engine receives more cooled air, resulting in a noticeable increase in performance. Our competition high performance mesh is made of high quality tube fin material with internal turbulators. This ensures maximum heat transfer and efficient airflow to keep cooling performance at the highest level.Despite its imposing size, our intercooler is surprisingly light, weighing just 9.5 kg. This minimizes the load on your vehicle and helps to improve overall performance.The kit is also available with complete charge air piping as an option. Want to get the most out of your intercooler? Our kit with complete charge air piping is the answer. It includes three reinforced silicone hoses and an aluminum charge air pipe for even better performance. The cast aluminium end boxes of our intercooler were developed and optimized with the help of flow analyses in the CFD system. The result is excellent cooling properties with minimal back pressure. All our intercoolers are equipped with an anti-corrosion coating that also has excellent heat conduction properties. This ensures permanent and optimum cooling, which is reflected in an impressive increase in performance. Our kit is completely ready to install and enables simple replacement with the standard intercooler. No complex conversion required - simply plug-and-play. Tested at up to 6 bar and pressure-stable. Our products are subject to strict quality control and are also suitable for racing. Boost the performance of your vehicle with our Competition high-performance intercooler and feel the difference every time you drive. Experience a new dimension in vehicle performance! Dimensions original intercooler:720mm x 145mm x 80mmV=8.35 litersA=1044 cm² Wagner Tuning intercooler dimensions:550mm x 445mm x 70mmV=17.13 litersA=2447 cm² Scope of delivery intercooler single:1 intercooler (black coated)1 Ø65mm aluminum charge air pipe (black coated) / optional3 reinforced silicone hoses (black) / optional1 mounting material1 assembly instructions Scope of delivery charge air cooler + charge air pipe:1 intercooler (black coated)1 Ø65mm aluminum charge air pipe (black coated) / optional3 reinforced silicone hoses (black) / optional1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.

Eibach Pro-Kit performance suspension springs for front and rear axle E10-20-045-02-22 The Eibach Pro-Kit lowering springs are the ideal solution for your vehicle, as the kit lowers the centre of gravity, reduces rebound when accelerating, reduces body roll when cornering and dips when braking. As a result, understeer and oversteer no longer occur. Lowering the vehicle with the Pro-Kit springs reduces the standard distance between the tyres and the wheel arch and gives the vehicle a sporty look. In addition, the handling of the vehicle is maximised. The Eibach Pro-Kits are designed by Eibach suspension engineers and test experts to deliver a combination of sporty looks and performance without compromising on safety or ride quality. - Developed and tested for combination with standard and aftermarket dampers- Component of the Eibach Pro system- Top performance handling- Lowers the vehicle's centre of gravity by up to 40 mm (depending on the vehicle)- Spring design for traction and attraction- Progressive suspension characteristics- Performance handling- ABE or parts certificate Note: Only for vehicles without levelling control. Information:- Lowering front axle: approx. 30mm (G20), approx. 25mm (G22/G26)- Rear axle lowering: approx. 30mm (G20), approx. 25mm (G22/G26)- Approval type: with expert opinion- Suspension: for all standard damping systems- Illustration may differ from the original Compatible vehicles:- Axle load front axle: up to 1120kg (G20/G22/G26)- Axle load rear axle: up to 1255kg (G20), up to 1325kg (G22/G26)- EC type approval number: e1*2018/858*00122*..- Only for vehicles without levelling system BMW 3 Series Saloon (G20) year of construction 11.18-320i xDrive330i xDriveM340i xDriveM340i Mild-Hybrid xDriveM340i xDrive320d xDrive320d Mild-Hybrid xDrive330d330d Mild-Hybrid330d xDrive330d Mild-Hybrid xDrive BMW 4 Series Coupe (G22) Year of construction 07.20-M440i Mild-Hybrid xDrive420d Mild-Hybrid xDrive BMW 4 Series Gran Coupe (G26) Year of construction 07.21-430i xDrive420d Mild-Hybrid xDrive

Made from state-of-the-art pre-preg carbon fibre, these direct replacement side emblems enhance the aggressive character of your vehicle and make it stand out both on the road and online. Why do we use pre-preg carbon fibre?Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability.It can also be a staggering 70% lighter than other carbon fibre options, ideal for weight saving.In terms of quality, pre-preg carbon is far more consistent, meaning the likelihood of imperfections is drastically reduced.of imperfections is drastically reduced.The manufacturing process eliminates unwanted air bubbles and results in a perfect, smooth, sleekand high-gloss finish that is the ultimate piece to complement your vehicle. When you buy Pre-Preg, you are investing in a higher quality, more durable part that will outlast other forms ofoutlast other forms of carbon fibre and potentially save you money in the long run. Details:- 100% pure prepreg carbon fibre construction- OEM style weave- High gloss finish- registration free Compatible vehicles:- BMW G80 M3 Sedan (2021+)- BMW G81 M3 Touring (2021+)Note: This is NOT an original BMW product!

We present another world first - a specially developed carbon headlight channel for the MKV Supra. Expert opinion: without With the MKV Supra A90 becoming increasingly popular as a serious track car, we have developed a cold air intake that gives you a decisive advantage. This headlight duct replaces the OEM headlight and offers a true RAM AIR configuration with a direct cold air supply to the intake system or directly to the turbo. The duct follows the same lines as the original headlight and features two carbon air ducts, one feeding the OEM air intake and the other feeding the entire airbox area. When used in conjunction with our Supra intake system, a panel on the intake system can be removed, exposing the filter to the additional airflow.As cold air is forced into the engine bay, the heat effect is reduced and multiple drag runs are possible. Made from prepreg carbon fiber, the duct has high structural strength and rigidity. It is attached to the OEM mounting points with laser-cut stainless steel brackets and stays in place even at high speeds. Our Supra headlight duct allows for the most direct cold airflow possible and significantly helps reduce heat soak, keeping times consistent even during multiple runs on the track. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Toyota Supra2.0145kW / 197hp190kW / 258hp1998cm³B4806.19 - Toyota SupraGR (A90/DB)250kW / 340hp2998cm³B5803.19 -