KW coilover springs | Height-adjustable spring kit | fits Audi RS4 quattro B9 | 253100BU | 253100CF

The upgrade engine water cooler kit is suitable for the: Audi RS3 8V Sportback/Sedan 294KW/400PS 07/2021+ Optimise the performance of your Audi RS3 8Y with the upgrade of the side-mounted engine water cooler. Our side-mounted Wagner Tuning water coolers are designed to directly replace the standard water coolers of your vehicle. By maximising the available installation space, we have been able to increase the size of the water coolers by an astonishing 132%. This significant increase in size, combined with the excellent thermal conductivity of our all-aluminium water radiators, offers significantly improved cooling efficiency. This is particularly suitable for vehicles that are heavily used on the racetrack or that require additional performance modifications. Our complete kit covers both the driver and passenger side and comes with additional brackets to ensure a smooth installation. Prepare your Audi RS3 8Y for peak performance and optimise its cooling system with our high-quality side engine water coolers. OEM water cooler dimensions:200 mm x 230 mm x 44 mmV = 1.84 litresA = 460 cm² Wagner Tuning water cooler dimensions:205 mm x 242 mm x 86 mmV = 4.27 litres (+132%)A = 496 cm² (+8%) Attention: Not authorised in the area of the StVZO.

In order to transport the air precisely to the brake system, a suitable inlet is essential. To ensure that the air let in through the inlet ducts of the front bumper is not randomly swirled around in the wheel arch, we have developed an inlet duct that can be fitted with little effort and directs the air precisely to the brakes - i.e. exactly where it is needed. The covers can optionally be fitted on the outside in front of the ventilation grilles as protection against moisture or similar. Our brake cooling system is plug & play and requires no modifications to the vehicle. Scope of delivery: - 2x intake scoop L+R Compatible vehicles:- BMW Z4 (G29)- Toyota Supra MK5 (DB/A90) Attention: Without approval in the area of the StVZO.

KW coilover springs The spring set with stepless lowering KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active. Setup - sporty and harmonious spring rates The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range. Stepless lowering Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles. Please note the conditions and instructions for this product: - Only for vehicles with electronic damper control - VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers) Technical information: Lowering VA/HA (mm): 5-25/5-20 Adjustment HA: Thread Approval: Parts certificate (§19.3) Scope of delivery: Set (VA+HA) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A5 (B8) 8T3 06/2007-01/2017 RS5 quattro Coupe Petrol 331 KW 4163 ccm 8 All-wheel drive

KW coilover springs The spring set with stepless lowering KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active. Setup - sporty and harmonious spring rates The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range. Stepless lowering Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles. Please note the conditions and instructions for this product: - Not for vehicles with level control / air suspension - Only for vehicles with electronic damper control - VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers) Technical information: Lowering VA/HA (mm): 10-35/10-35 Adjustment HA: Thread Approval: Parts certificate (§19.3) Scope of delivery: Set (VA+HA) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI Q5 (FY) FYB 05/2016- 2.0 TDI quattro SUV Diesel 120 KW 1968 ccm 4 Allrad AUDI Q5 (FY) FYB 05/2016- 2. 0 TDI quattro SUV Diesel 140 KW 1968 ccm 4 All-wheel AUDI Q5 (FY) FYB 05/2016- 2.0 TFSI quattro SUV Petrol 183 KW 1984 ccm 4 All-wheel AUDI Q5 (FY) FYB 05/2016- 2. 0 TFSI quattro SUV Petrol 185 KW 1984 ccm 4 All-wheel drive AUDI Q5 (FY) FYB 05/2016- 3. 0 TDI quattro SUV Diesel 210 KW 2967 ccm 6 All-wheel drive AUDI Q5 (FY) FYB 05/2016- 35 TDI quattro SUV Diesel 120 KW 1968 ccm 4 All-wheel drive AUDI Q5 (FY) FYB 05/2016-     40 TDI Mild Hybrid quattro SUV Diesel/Electric 150 KW 1968 ccm 4 All-wheel drive AUDI Q5 (FY) FYB 05/2016- 40 TDI quattro SUV Diesel 140 KW 1968 ccm 4 all-wheel drive AUDI Q5 (FY) FYB 05/2016- 40 TFSI Mild Hybrid quattro SUV Petrol/electric 150 KW 1984 ccm 4 all-wheel drive AUDI Q5 (FY) FYB 05/2016- 45 TDI quattro SUV Diesel 170 KW 2967 ccm 6 all-wheel drive AUDI Q5 (FY) FYB 05/2016-     45 TFSI Mild Hybrid quattro SUV Petrol/electric 180 KW 1984 ccm 4 all-wheel drive AUDI Q5 (FY) FYB 05/2016- 45 TFSI Mild Hybrid quattro SUV Petrol/electric 195 KW 1984 ccm 4 all-wheel drive AUDI Q5 (FY) FYB 05/2016- 50 TDI Mild Hybrid quattro SUV Diesel/electric 210 KW 2967 ccm 6 all-wheel drive AUDI Q5 (FY) FYB 05/2016-     50 TDI quattro SUV Diesel 210 KW 2967 ccm 6 All-wheel drive AUDI Q5 (FY) FYB 05/2016- SQ5 TDI SUV Diesel/Electric 251 KW 2967 ccm 6 All-wheel drive AUDI Q5 (FY) FYB 05/2016- SQ5 TDI Mild Hybrid quattro SUV Diesel/Electric 255 KW 2967 ccm 6 All-wheel drive AUDI Q5 (FY) FYB 05/2016- SQ5 TFSI Mild Hybrid quattro SUV Petrol/electric 260 KW 2995 ccm 6 All-wheel drive AUDI Q5 (FY) FYB 05/2016- SQ5 TFSI quattro off-road vehicle closed Petrol 260 KW 2995 ccm 6 All-wheel drive AUDI Q5 Sportback (FYT) 11/2020-     40 TDI quattro SUV diesel/electric 150 KW 1968 ccm 4 all-wheel drive AUDI Q5 Sportback (FYT) 11/2020- 40 TFSI Mild Hybrid quattro SUV petrol/electric 150 KW 1984 ccm 4 all-wheel drive AUDI Q5 Sportback (FYT) 11/2020-     45 TFSI quattro SUV petrol/electric 195 KW 1984 ccm 4 all-wheel drive AUDI Q5 Sportback (FYT) 11/2020- 50 TDI quattro SUV diesel/electric 210 KW 2967 ccm 6 all-wheel drive AUDI Q5 Sportback (FYT) 11/2020-     SQ5 TDI SUV diesel/electric 251 KW 2967 ccm 6 all-wheel drive AUDI Q5 Sportback (FYT) 11/2020- SQ5 TFSI quattro SUV petrol 260 KW 2995 ccm 6 all-wheel drive AUDI Q5 Sportback (FYT) 11/2020- SQ5 TFSI quattro SUV petrol/electric 260 KW 2995 ccm 6 all-wheel drive

Our timeless, understated approach to aesthetics enhances rather than detracts from the visual drama of M models. The Sterckenn splitter can be used with a standard F91/F92 bumper as well as with M-Performance carbon accessories.Thanks to its attachment form, it can be easily installed and removed at any time to restore the original condition of the vehicle. Splitting the splitter into three independent components has already proven to be an extremely effective solution for reducing shipping costs.The solution also made it possible to cleverly mount the main part a few millimeters above the side parts to increase the approach angle and obstacle clearance.