Water cooler kit | fits BMW 1/2/3/4 series (F-series) B48 B58 | Wagner Tuning

A powerful brake is one of the most important components in motorsport. With these upgrade kits, the necessary balance of performance, weight and durability has been perfectly combined through the uncompromising selection of materials, so that this product can meet the high demands of extreme automotive applications. To achieve this, MOV'IT has increased the diameter and thickness of the brake discs and used more cross holes. Each pre-cast hole is re-drilled and countersunk to achieve a more favourable flow. The brake disc's optimised DDE ventilation system has an 80% larger surface area compared to other brake discs, resulting in a significant reduction in temperature and wear.Without parts certificate Attention: The conversion means that only rims with at least 19 inches can be fitted! Features: - Upgrade kit front axle, 370mm, 2-piece disc, perforated - Without parts certificate Scope of delivery: - 2x brake disc perforated left/right incl. brake pot - 1x mounting material - 1x installation instructions and running-in instructions Compatible vehicles:Audi R8 (422, 423) 4.2 FSI quattro 309kW / 420PS / 4163cm³ (until 31/08/2009)Audi A4 B7 (8E) RS4 quattro 309kW / 420PS / 4163cm³Audi A6 C5 (4B) RS6 quattro 331kW / 450PS / 4172cm³Audi A6 C5 (4B) RS6 quattro plus 353kW / 480PS / 4172cm³ Notes:When installing the upgrade kit, we always recommend replacing the brake pads, as the use of used pads on new brake discs is not recommended.When installed in our factory, the conversion is carried out exclusively with new brake pads!

Plug and Play suitable for the following models with the B48 & B58.1 engine:BMW 1 Series F20/F21 LCI from 09/2015 - 120i, 125i, M140(x)iBMW 2 Series F22/F23 LCI from 09/2016 - 220i, 230i, M240iBMW 3 Series F30/F31/F34/F35 LCI from 09/2014 - 320i, 330i, 340iBMW 4 Series F32/F33/F36 LCI from 03/2016 - 420i, 430i, 440i The 2.0 liter B48B20 and 3.0 liter B58B30M0 turbo engine of the specified models is equipped with an indirect charge air cooling circuit. This means that the charge air is not cooled using the ambient air as a cooling medium (as usual), but by means of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water cooler come into play. The newly developed competition racing mesh of the WAGNERTUNING high-performance water cooler increases the radiator volume of the standard water cooler by 117%. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the adjacent components (e.g. the engine water cooler located behind it) sufficient air flow for heat exchange. Furthermore, the increased cooling water volume allows the entire system thermal to be kept at a lower level over a longer period of time. All WAGNER TUNING water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. Installation of the system is also uncomplicated and plug & play with the help of our installation instructions. OEM water cooler dimensions:576 mm x 495 mm x 27 mmV = 7.70 litersA = 2851 cm² WT water cooler dimensions:524 mm x 468 mm x 68 mmV = 16.70 litersA = 2454 cm²Attention: Not approved in the area of the StVZO.

Facts: - Tailpipes: 4x 89mm black - Material: stainless steel - electric flaps - Made in Germany (Lake Constance) - with/without ECE approval (depending on choice of flap control)* Scope of delivery: - 1x Aulitzky Exhaust rear silencer - 4x tailpipes 89mm black - ECE handout Compatible vehicles:VehicleVehicle typePower outputcubic capacityEngineYear of constructionBMW 1 Series Coupe (E82)M250kW / 340PS2979ccN54 B30 A03.11 - 06.12 *ATTENTION!In conjunction with the standard or ECE flap control system (with type approval), this flap rear silencer has ECE approval so that it can be used legally within the scope of the StVZO without registration in the vehicle documents.The use of flap rear silencers in conjunction with the race flap control (without approval) is not permitted for use on public roads and is only intended for racing purposes! If you nevertheless install a product without approval in your vehicle and use it within the scope of the StVZO, you are liable to prosecution. Possible consequences that you can expect in this case: Expiry of the operating licence in accordance with §19 of the StVZO and possible resulting immobilisation of the vehicle. Other possible consequences, such as a charge of tax evasion, as well as possible investigations by the environmental authorities are at the discretion of the investigators.

Facts: - Tailpipes: 89mm black matt - 3.0 inch stainless steel exhaust system from OPF - Electric flaps - Flap control still possible via the driving profiles (only with AMG Performance AGA) - Made in Germany (Lake Constance) - with/without ECE approval (depending on choice of flap control)* Scope of delivery: - 1x Aulitzky exhaust system from OPF - 89mm tailpipes black matt - ECE handout Compatible vehicles: VehicleVehicle typePower outputcubic capacityEngineYear of constructionMerceds-Benz G-Class (W463)AMG G63430kW / 585PS3982ccM 177.98003.18 - *ATTENTION! In conjunction with the standard or ECE flap control system (with type approval), this flap exhaust system has ECE approval so that it can be used legally within the scope of the StVZO without registration in the vehicle documents.The use of flap exhaust systems in conjunction with the race flap control (without approval) is not permitted for use on public roads and is only intended for racing purposes! If you nevertheless install a product without approval in your vehicle and use it within the scope of the StVZO, you are liable to prosecution. Possible consequences that you can expect in this case: Expiry of the operating licence in accordance with §19 of the StVZO and possible resulting immobilisation of the vehicle. Other possible consequences, such as a charge of tax evasion, as well as possible investigations by the environmental authorities are at the discretion of the investigators.

KW V1 coilover suspension Sportiness paired with outstanding looks. With factory pre-configured damping.Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car. Stepless loweringThe KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, the lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or on the rear axle height adjustment for non-wheel-guiding double-wishbone rear axles. The benchmark for sporty, dynamic tuning fansWith its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to increase your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasureAs a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, this warranty is valid for up to five years. - Optimally adjusted in advance- sporty and harmonious damping technology- Stainless steel technology "inox-line"- Individually height-adjustable- Tested adjustment range- Ready-to-install complete solution- High-quality components for a long service life- Complete documentation for easy handling Setup - factory pre-configured damping setupThe KW V1 has a vehicle-specific, permanently configured damper setup. The spring and the damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving. Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. The KW V1 is particularly interesting for tuning enthusiasts who prioritise the show & shine concept. Please note the conditions and instructions for this product: - VA + HA height-adjustable (threaded struts) - With variant 2 or variant 3, hardness adjustment also possible on the VA only when removed! Technical information: Lowering VA/HA (mm): 10-30/10-30 Version: V1 Hardness adjustment: none Material: stainless steel Adjustment VA/HA: thread/thread Approval: parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A4 Avant (B5) 8D5, B51 11/1994-12/2002 RS4 quattro station wagon Petrol 280 KW 2671 ccm 6 All-wheel drive

The Wagner Tuning Competition intercooler kit EVO2 Upgrade Kit fits the following models:Porsche 997 Turbo (2008+) 3,8L;368KW / 500hp facelift models onlyPorsche 997 Turbo S (2008+) 3,8L;390KW / 530hp facelift models only EVO 2 high-performance intercooler kit: The ultimate performance upgrade for your Porsche 997 Turbo Experience the unbridled power of your Porsche 997 Turbo with our EVO 2 High Performance Intercooler Kit. Here's what this kit has to offer. Our EVO 2 high performance intercoolers (2 x [330mm x 222mm x 145mm] = 21.244cm³) are designed to provide a whopping 77% more charge air volume than the factory intercoolers. This means a significant increase in the performance of your vehicle. Our specially developed competition high performance mesh ensures excellent cooling characteristics. Even under extreme conditions, your engine will maintain the optimum temperature. Despite its impressive performance, our intercooler kit is surprisingly light. Each of the two coolers weighs just 2 x 6.7 kg, which helps to reduce weight in addition to increasing performance. CAD-developed free-form end boxes made of cast aluminum ensure the best possible internal air flow and a high pressure resistance of up to 6 bar (tested). Our kit includes a custom-fit carbon air duct which ensures that the intercooler is optimally supplied with fresh air. This is crucial for the maximum performance of your vehicle. The kit includes additional silicone hoses with an enlarged cross-section to optimize the airflow. Our intercoolers are coated with an anti-corrosion coating that not only ensures longevity, but also has excellent heat conduction properties. Our kit comes complete with new carbon air guides, silicone hoses and aluminum adapters. Installation is simple and is done in exchange for the factory intercoolers. This kit is specifically designed for racing and features a 70mm inlet and outlet for maximum performance. Get the most out of your Porsche 997 Turbo with our EVO 2 high performance intercooler kit. Visit our website for more information and to order your kit. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 77% more charge air volume- extended to 70 mm inlet and outlet- Precisely fitting carbon air duct- simple replacement Scope of delivery:2 intercoolers4 carbon air ducts4 silicone hoses4 hose clamps1 mounting materialAttention: Not approved in the area of the StVZO.