Free shipping
info@aulitzkytuning.de
+49 (0)9874 6891630

Water cooler kit | fits BMW Z4 (G29) 20i/30i/M40i / Toyota Supra MK5 (A90) GR B48 B58 | Wagner Tuning

€1,250.00*

Delivery time: approx. 1-5 working days*

place a request
Product number: WT400001011
Product information "Water cooler kit | fits BMW Z4 (G29) 20i/30i/M40i / Toyota Supra MK5 (A90) GR B48 B58 | Wagner Tuning"

The water cooler kit is suitable for the following models:
BMW Z4 G29 20i 2.0L 145KW/197hp from 2019 (OPF model)
BMW Z4 G29 30i 2.0L 190KW/258hp from 2019 (OPF model)
BMW Z4 G29 M40i 3.0L 250KW/340hp from 2019 (OPF model)
Toyota Supra MK5 A90 GR 2,0L 190KW/258hp from 2019 (OPF model)
Toyota Supra MK5 A90 GR 3,0L 250KW/340hp from 2019 (OPF model)

Get the best out of your turbo engine.

Experience performance optimization with the Wagner Tuning Upgrade Water Cooler, specifically designed for the 2.0L Liter B48 and the 3.0 Liter B58 turbo engine. The specified models benefit from an advanced indirect charge air cooling circuit, which uses a special cooling water circuit to cool the charge air instead of the usual ambient air. A reduction in the cooling water temperature therefore means a direct improvement in the cooling performance of the charge air.

The Wagner Tuning Upgrade water cooler impresses with its newly developed competition racing mesh, which increases the radiator volume of the standard water cooler by an impressive 117%. The optimized ratio between the inner and outer cooling surface ensures maximum heat transfer and at the same time allows sufficient air flow for adjacent components such as the engine water cooler. Due to the increased cooling water volume, the system thermals remain at a lower level over a longer period of time.

Each Wagner Tuning water cooler is equipped with a thermally conductive anti-corrosion coating that ensures a long-lasting cooling effect. The installation of the system is uncomplicated and almost plug & play thanks to our user-friendly installation instructions.

Take the performance of your turbo engine to the next level with the Wagner Tuning Upgrade water cooler.

Dimensions OEM water cooler:
576 mm x 495 mm x 27 mm
V = 7.70 liters
A = 2851 cm²

Wagner Tuning water cooler dimensions:
524 mm x 468 mm x 68 mm
V = 16.70 liters
A = 2454 cm²

Attention: Not approved in the area of the StVZO.

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Zuletzt gesehene Produkte

Zuletzt gesehene Produkte

KW DDC P&P coilover suspension inox | fits BMW 3 series/4 series 320d/330i/420d/420i/430i xDrive (G21/G22) | 39020048
KW coilover suspension DDC “Plug & Play” The “Plug & Play” solution for vehicles that have a standard electronic damper adjustment. KW also offers you the possibility to combine the active standard damper control of your sporty vehicle with the stainless steel KW DDC Plug & Play coilover suspension. In this way, you can continue to use the existing active damper control in your car such as VW Scirocco, VW Golf VI, VW Passat, BMW and other models in conjunction with a stepless lowering. The best thing about it: Apart from replacing the adaptive standard suspension with the KW DDC Plug & Play coilover suspension, no further conversion steps or even modifications to the on-board electronics are necessary. The adaptive KW dampers are simply connected to the original connectors of your car manufacturer via the KW DDC plug connection. The standard control unit then takes over the regulation and control of the KW DDC Plug & Play coilover suspension. Perfect symbiosis of an OEM control unit with the advantages of an adaptive KW coilover suspension Our suspension technology is compatible with the electronics of various car manufacturers. This means that the adaptive KW DDC Plug & Play coilover suspension is immediately recognized by the on-board electronics. All displays and controls of your standard vehicle remain fully functional and combine the advantages of an adaptive damping system with the stylish and sporty lowering of a high-quality KW coilover suspension. Due to the exclusive use of rust-free stainless steel and durable components, the functionality of the rust-free KW coilovers is maintained under all weather conditions. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, adjustment is also possible after a snowy winter, for example. No oxidation occurred on the KW threaded spring legs during a salt spray test. This means that the adjustment of the stepless lowering is not affected even after years. - the plug & play solution for sportiness or more ride comfort at the touch of a button with outstanding looks thanks to stepless lowering - Compatible with the standard suspension control unit - Vehicle-specific damper setups such as Comfort / Normal / Sport - Operation via series buttons in the interior Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) - Only for vehicles with electronic damper control Technical information: Lowering VA/HA (mm): 40-60/40-60 Version: DDC - Plug & Play Hardness adjustment: Rebound and compression stage Material: Stainless steel Adjustment VA/HA: thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive BMW 3 Series Touring (G21, G81) G3K 07/2019- 320 d xDrive Estate Diesel 120 KW 1995 ccm 4 All-wheel drive BMW 3 Series Touring (G21, G81) G3K 07/2019- 320 d xDrive Estate Diesel 140 KW 1995 ccm 4 all-wheel drive BMW 3 Series Touring (G21, G81) G3K 07/2019- 330 i xDrive Combi Petrol 180 KW 1998 ccm 4 All-wheel drive BMW 3 Series Touring (G21, G81) G3K 07/2019- 330 i xDrive Estate Petrol 190 KW 1998 ccm 4 All-wheel drive BMW 4 Series Coupe (G22, G82) 07/2020- 420 d Mild-Hybrid xDrive Coupe Diesel/Electric 140 KW 1995 ccm 4 all-wheel drive BMW 4 Series Coupe (G22, G82) 07/2020- 420 i xDrive Coupe Petrol 135 KW 1998 ccm 4 All-wheel drive BMW 4 Series Coupe (G22, G82) 07/2020- 430 i xDrive Coupe Petrol 180 KW 1998 ccm 4 all-wheel drive BMW 4 Series Coupe (G22, G82) 07/2020- 430 i xDrive Coupe Petrol 190 KW 1998 ccm 4 All-wheel drive

€3,099.95*