Aulitzky Tuning | Water cooler Set side-mounted | fits BMW M2/M3/M4 incl. Competition/CS/CSL (G80/G81/G82/G83/G87) S58

Actuator for exhaust flap OEM part number: 18307851568 (18 30 7 851 568) Suitable for the following BMW models with exhaust flap: F80 F82 F83 F85 F86 F87N F90 F91 F92 F93 F95 F96 F97 F98 G01 G02 G05 G06 G14 G15 G16 G20 G21 G22 G23 G26 G30 G42 G82 G83

Here you get a sports air filter with all its advantages:- higher air flow rate- higher filter performance (even smaller particles are filtered)- The particles are trapped in the filter after intake and thus remain trapped until cleaning.- Washable and reusable filter- Increased air flow and therefore better combustion in the engine- No reduction in air flow over a minimum of 50,000 km- Sufficient air even at high engine speeds- more power- Better intake noise- Reduced fuel consumption These sports air filters have polyurethane as the edge material. Polyurethane is more resistant to petrol, vapours and the like. It has an ideal remoulding. This ensures that the edge of the filter is 100% sealed even when it is reinserted after cleaning. The edge surface is made from a single mould. With many other makes, pores in the edge material and joining surfaces where the edge is joined together often lead to a crack in the edge, which can result in unclean air being sucked into the engine. With paper filters, the air flow rate is significantly lower and decreases further after just a short period of use.In addition, paper filters must be disposed of after the specified mileage. TitanTec sports air filters last a lifetime. This is good for the environment and your wallet.Other washable cotton filters only filter much larger particles compared to TitanTec sports air filters. Cleaning the filters:A TitanTec sports air filter has no oil residue and has 100% of its original performance again after cleaning.Cleaning is quick and easy.We recommend cleaning after 15,000-20,000 kilometres or once a year at the latest.The best time to clean the air filter is around the end of May or beginning of June, i.e. after the pollen count, as this is the time when the air filter is under the most strain.Under no circumstances should aggressive cleaning agents such as petroleum ether, cleaning petrol, brake cleaner etc. be used, as this can damage the material. Details: Type: 2x panel filter Length: 187 mm Width: 235 mm Compatible vehicles: BMW 2 Coupe (G42, G87) M2, 460 hp, 338 kW, from 11/22 BMW 3 (G20, G80, G28) M3, 480 hp, 353 kW, from 11/20 BMW 3 (G20, G80, G28) M3 Competition, 510 hp, 375 kW, from 11/20 BMW 3 (G20, G80, G28) M3 Competition xDrive, 510 hp, 375 kW, from 05/21 BMW 3 (G20, G80, G28) M3 CS xDrive, 551 hp, 405 kW, from 03/23 BMW 3 Touring (G21, G81) M3 Competition xDrive, 510 hp, 375 kW, from 07/22 BMW 4 Coupe (G22, G82) M4, 480 hp, 353 kW, from 11/20 BMW 4 Coupe (G22, G82) M4 Competition, 510 hp, 375 kW, from 11/20 BMW 4 Coupe (G22, G82) M4 Competition M xDrive, 510 hp, 375 kW, from 05/21 BMW 4 Coupe (G22, G82) M4 CSL, 551 hp, 405 kW, 05/22 to 02/23 BMW 4 Convertible (G23, G83) M4 Competition M xDrive, 510 hp, 375 kW, from 07/21

The carbon replacement air intakes Twin Fin for the G8x were developed to match the channel lines of the SP1 G8X front splitter. With both the SP1 and Twin Fin ducts installed, you get the aggressive angles your front end needs.Our covers are a direct replacement, which means you can finally remove the honeycomb grille that is currently in front of the air ducts.These covers are made of pure pre-preg carbon, so the bumper adds minimal weight while providing the aggressive look you've been wanting. Details:- 100% pure pre-preg carbon fiber construction- OEM style fabric- High gloss finish- Fit guarantee- Mounts to the OEM front bumper using the original grille clip positions- with parts certificate according to §19.3 Compatible vehicles:- BMW G80 M3/Competition/CS Sedan (2021+)- BMW G81 M3 Competition Touring (2021+)- BMW G82 M4/Competition/CSL Coupe (2021+)- BMW G83 M4 Competition Convertible (2021+)Note: This is NOT an original BMW product!

The Carbon Performance Twin Fin air intakes for the G8x were developed to give the vehicle a distinctive look. These covers are made of pure pre-preg carbon, so the bumper adds minimal weight while providing the aggressive look you've been wanting. Details:- 100% pure pre-preg carbon fiber construction- OEM style fabric- High gloss finish- Fit guarantee- with parts certificate according to §19.3 Compatible vehicles:- BMW G80 M3/Competition/CS Sedan (2021+)- BMW G81 M3 Competition Touring (2021+)- BMW G82 M4/Competition/CSL Coupe (2021+)- BMW G83 M4 Competition Convertible (2021+)Note: This is NOT an original BMW product!

The Air Intake Set for the G8X models made of carbon fibre gives your vehicle an upscale look. When you buy Pre-Preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run. Scope of delivery:- 1x Air Intake Set Details:- 100% carbon fibre construction- High gloss finish- Fit guarantee Compatible vehicles with S58 engine:- BMW G80 M3 (all models)- BMW G81 M3 (all models)- BMW G82 M4 (all models)- BMW G83 M4 (all models) Note: This is NOT an original BMW product!

Add a touch of luxury to the interior of your G8X with this custom-made center armrest in high-quality leather or Alcantara. The red contrast stitching creates a sporty look inspired by motorsport. Fully compatible with the Karbonius center console and easy to install without any modifications. Features: - Available in high-quality leather or Alcantara - Red motorsport-style stitching - Quick installation – no modifications required - Exclusive design for a personalized interior Scope of delivery: - 1x center armrest Compatible vehicles: - BMW G87 M2 - BMW G80 M3 - BMW G81 M3 - BMW G82 M4 - BMW G83 M4 Note: This is NOT an original BMW product!

Facts: - 2x 3” (76mm), replaces the main catalyst - with 200 cell stainless steel sports catalyst - Euro 6 compatible - for current OPF models - with Thermo-Integral insulation (for an extra charge) - with ECE approval* Compatible vehicles:VehicleVehicle typePowerCapacityEngineYear of construction BMW 2er (G87)M2338kW / 460hp2993cm³S58 B30 A11.22 - BMW 3 Series (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 - BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510hp390kW / 530hp2993cm³S58 B30 A05.21 -07.24 - BMW 3 Series (G80)M3 CS xDrive405kW / 551hp2993cm³S58 B30 A03.23 - BMW 4 Series (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 - BMW 4 Series (G82/G83)M4 Competition / M xDrive375kW / 510hp2993cm³S58 B30 A11.20 - BMW 4 Series (G82)M4 CSL xDrive405kW / 551hp412kW / 560hp2993cm³S58 B30 A05.22 - 02.2311.22 - 02.23 Note: Depending on the software version, the engine control light may light up. We recommend the purchase of an OFF set module or software customisation. *This downpipe has ECE approval so that it can be used within the scope of the German Road Traffic Licensing Regulations (StVZO) without registration in the vehicle documents.

Facts: - Tailpipes: 4x100mm black - 3.0 inch stainless steel - MSD removal - Mounting for the original electric flap actuator - Made in Germany (Lake Constance) - with ECE approval* Scope of delivery: - 1x Aulitzky Exhaust exhaust system from OPF - 4x tailpipes 100mm black - ECE handout Compatible vehicles:VehicleVehicle typePower outputDisplacementEngineYear of construction BMW 3 Series (G80)M3353kW / 480PS2993cm³S58 B30 B11.20 - BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510PS390kW / 530PS2993cm³S58 B30 A05.21 -07.24 - BMW 3 Series (G80)M3 CS xDrive405kW / 551PS2993cm³S58 B30 A03.23 - BMW 4 Series (G82)M4353kW / 480PS2993cm³S58 B30 B11.20 - BMW 4 Series (G82/G83)M4 Competition / M xDrive375kW / 510PS2993cm³S58 B30 A11.20 - BMW 4 Series (G82)M4 CSL xDrive405kW / 551hp2993cm³S58 B30 A05.22 *The ECE and the combination certificate for the pre-facelift and facelift models are available (includes intake, intercooler, boost pipe kit, downpipe, exhaust system, 670hp Aulitzky App performance increase and 107dB increase in stationary noise). In conjunction with the standard flap control system (with type approval), this flap exhaust system has ECE approval, meaning that it can be used legally within the scope of the German Road Traffic Licensing Regulations (StVZO) without registration in the vehicle documents.

Function:- variable flap control of the original or retrofitted flap exhaust system- controllable via steering wheel buttons Compatible vehicles: VehicleTypePowerEngine capacityEngine typeYear of constructionBMW 3er (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 -BMW 3er (G80/G81)M3 Competition / xDrive375kW / 510hp2993cm³S58 B30 A05.21 -BMW 4er (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 -BMW 4er (G82/G83)M4 Competition / M xDrive375kW / 510hp2993cm³S58 B30 A05.21 - Note: This product is NOT StVZO approved and NOT intended for sale within the EU! This item is for show & motorsport purposes only and must not be used/installed on public roads. If the component is installed on/in the vehicle, the operating license expires! The pictures shown are examples.

The Aulitzky Tuning Cooler and intake package for the S58 engines of the G8x series was developed to meet the high demands of the engine. With combination certificate!* Compatible vehicles:VehicleVehicle typePowerCapacityEngineYear of construction BMW 2er (G87)M2338kW / 460hp2993cm³S58 B30 A11.22 - BMW 3 Series (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 - BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510hp390kW / 530hp2993cm³S58 B30 A05.21 -07.24 - BMW 3 Series (G80)M3 CS xDrive405kW / 551hp2993cm³S58 B30 A03.23 - BMW 4 Series (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 - BMW 4 Series (G82/G83)M4 Competition / M xDrive375kW / 510hp2993cm³S58 B30 A11.20 - BMW 4 Series (G82)M4 CSL xDrive405kW / 551hp412kW / 560hp2993cm³S58 B30 A05.22 - 02.2311.22 - 02.23 *The combination certificate for the pre-facelift and facelift models is available (includes intake manifold, intake, intercooler, boost pipe kit, downpipe, exhaust system, 670hp Aulitzky App performance increase and 107dB increase in stationary noise).

The Aulitzky Tuning intake manifold for the S58 engines of the G8x series was developed to meet the high demands of the engine. Advantages: - Improved cooling performance with up to 20° cooler intake air temperatures - Maximum mechanical and thermal relief for the turbocharger - Increase in power and torque - Absolute pressure resistance and reliability - Easy installation thanks to plug-and-play - 1/8 NPT connections for measuring and monitoring additional parameters - Optimally suited for all performance levels With combination certificate!* Compatible vehicles:VehicleVehicle typePowerCapacityEngineYear of construction BMW 2er (G87)M2338kW / 460hp2993cm³S58 B30 A11.22 - BMW 3 Series (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 - BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510hp390kW / 530hp2993cm³S58 B30 A05.21 -07.24 - BMW 3 Series (G80)M3 CS xDrive405kW / 551hp2993cm³S58 B30 A03.23 - BMW 4 Series (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 - BMW 4 Series (G82/G83)M4 Competition / M xDrive375kW / 510hp2993cm³S58 B30 A11.20 - BMW 4 Series (G82)M4 CSL xDrive405kW / 551hp412kW / 560hp2993cm³S58 B30 A05.22 - 02.2311.22 - 02.23 *The combination certificate for the pre-facelift and facelift models is available (includes intake manifold, intake, intercooler, boost pipe kit, downpipe, exhaust system, 670hp Aulitzky App performance increase and 107dB increase in stationary noise).

The Aulitzky Tuning Portinjection Rail for the S58 engines of the G8x series was developed to meet the high demands of the engine.Compatible vehicles:VehicleVehicle typePowerCapacityEngineYear of construction BMW 2er (G87)M2338kW / 460hp2993cm³S58 B30 A11.22 - BMW 3 Series (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 - BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510hp390kW / 530hp2993cm³S58 B30 A05.21 -07.24 - BMW 3 Series (G80)M3 CS xDrive405kW / 551hp2993cm³S58 B30 A03.23 - BMW 4 Series (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 - BMW 4 Series (G82/G83)M4 Competition / M xDrive375kW / 510hp2993cm³S58 B30 A11.20 - BMW 4 Series (G82)M4 CSL xDrive405kW / 551hp412kW / 560hp2993cm³S58 B30 A05.22 - 02.2311.22 - 02.23

The Aulitzky Tuning transmission oil cooler for the S58 engines of the G8x series was developed to meet the high demands of the engine. Advantages: - Specially developed for the S58 3.0L R6 biturbo engine - Ensures that the oil temperature remains within the optimum range even under extreme conditions - Particularly suitable for performance-enhanced vehicles With combination certificate!* Compatible vehicles:VehicleVehicle typePowerCapacityEngineYear of construction BMW 2er (G87)M2338kW / 460hp2993cm³S58 B30 A11.22 - BMW 3 Series (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 - BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510hp390kW / 530hp2993cm³S58 B30 A05.21 -07.24 - BMW 3 Series (G80)M3 CS xDrive405kW / 551hp2993cm³S58 B30 A03.23 - BMW 4 Series (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 - BMW 4 Series (G82/G83)M4 Competition / M xDrive375kW / 510hp2993cm³S58 B30 A11.20 - BMW 4 Series (G82)M4 CSL xDrive405kW / 551hp412kW / 560hp2993cm³S58 B30 A05.22 - 02.2311.22 - 02.23 *The combination certificate for the pre-facelift and facelift models is available (includes intake manifold, intake, intercooler, boost pipe kit, downpipe, exhaust system, 670hp Aulitzky App performance increase and 107dB increase in stationary noise).

The side-mounted Aulitzky Tuning water cooler for the S58 engines of the G8x series was developed to meet the high demands of the engine. Advantages: - Specially developed for the S58 3.0L R6 biturbo engine - Constant maximum performance - Thermal stabilization With combination certificate!* Compatible vehicles:VehicleVehicle typePowerCapacityEngineYear of construction BMW 2er (G87)M2338kW / 460hp2993cm³S58 B30 A11.22 - BMW 3 Series (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 - BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510hp390kW / 530hp2993cm³S58 B30 A05.21 -07.24 - BMW 3 Series (G80)M3 CS xDrive405kW / 551hp2993cm³S58 B30 A03.23 - BMW 4 Series (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 - BMW 4 Series (G82/G83)M4 Competition / M xDrive375kW / 510hp2993cm³S58 B30 A11.20 - BMW 4 Series (G82)M4 CSL xDrive405kW / 551hp412kW / 560hp2993cm³S58 B30 A05.22 - 02.2311.22 - 02.23 *The combination certificate for the pre-facelift and facelift models is available (includes intake manifold, intake, intercooler, boost pipe kit, downpipe, exhaust system, 670hp Aulitzky App performance increase and 107dB increase in stationary noise).

The Aulitzky Tuning water cooler for the S58 engines of the G8x series was developed to meet the high demands of the engine. Advantages: - Specially developed for the S58 3.0L R6 biturbo engine - 60% increase in cooler volume - Constant maximum performance - Thermal stabilization With combination certificate!* Compatible vehicles:VehicleVehicle typePowerCapacityEngineYear of construction BMW 2er (G87)M2338kW / 460hp2993cm³S58 B30 A11.22 - BMW 3 Series (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 - BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510hp390kW / 530hp2993cm³S58 B30 A05.21 -07.24 - BMW 3 Series (G80)M3 CS xDrive405kW / 551hp2993cm³S58 B30 A03.23 - BMW 4 Series (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 - BMW 4 Series (G82/G83)M4 Competition / M xDrive375kW / 510hp2993cm³S58 B30 A11.20 - BMW 4 Series (G82)M4 CSL xDrive405kW / 551hp412kW / 560hp2993cm³S58 B30 A05.22 - 02.2311.22 - 02.23 *The combination certificate for the pre-facelift and facelift models is available (includes intake manifold, intake, intercooler, boost pipe kit, downpipe, exhaust system, 670hp Aulitzky App performance increase and 107dB increase in stationary noise).

Suitable for: BMW M2 G87 S58 338kW/460hp 2993cm³ BMW M2 G87 S58 353kW/480hp 2993cm³ BMW M3 G80 S58 353kW/480hp 2993cm³ BMW M3 Competition/xDrive G80/G81 S58 375kW/510hp 2993cm³ BMW M3 Competition xDrive G80/G81 S58 390kW/530hp 2993cm³ BMW M3 CS xDrive G80 S58 405kW/551hp 2993cm³ BMW M4 G82 S58 353kW/480hp 2993cm³ BMW M4 Competition/M xDrive G82/G83 S58 375kW/510hp 2993cm³ BMW M4 CSL xDrive G82 S58 405kW/551hp 2993cm³ BMW M4 CSL xDrive G82 S58 412kW/560PS 2993cm³ Optimise the performance and responsiveness of your G8X with our high-quality Boost Pipe Kit for the S58 engine. Developed using advanced CFD simulations for maximum flow optimisation, this kit offers a premium solution for demanding drivers looking for a performance boost. Your benefits:Flow optimised: Each Boost Pipe has been carefully designed using CFD simulations to ensure optimal airflow and improved performance. Highest pressure resistance: The Boost Pipe Kit has undergone rigorous testing and is pressure resistant up to 6 bar to ensure reliable performance even under extreme conditions. High quality materials: Made from high quality aluminium for maximum durability and performance. Precise fit: Each Boost Pipe is customised for a perfect fit and easy installation without the need for additional adjustments. Improved performance: Optimising the airflow not only increases performance but also improves engine response for an exciting riding experience. Scope of delivery:1x aluminium boost pipe1x parts certificate Note:Please note that the product image is for illustrative purposes only and the actual product may differ. With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

The high-quality carbon fibre front canards are a perfect addition to significantly enhance the style of your vehicle. Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- With parts certificate according to §19.3 Scope of delivery:- 1x set carbon front canards Compatible vehicles: BMW G80 M3 Limousine (2021+) BMW G80 M3 Competition Limousine (2021+) BMW G81 M3 Touring (2023+) BMW G81 M3 Competition Touring (2023+) BMW G82 M4 Coupe (2021+) BMW G82 M4 Competition Coupé (2021+) BMW G83 M4 Cabrio (2021+) BMW G83 M4 Competition Cabrio (2021+)  Note: This is NOT an original BMW product!

The high-quality carbon fibre front canards are a perfect addition to significantly enhance the style of your vehicle. Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- With parts certificate according to §19.3 Scope of delivery:- 1x Performance carbon canards Compatible vehicles: BMW G80 M3 Limousine (2021+) BMW G80 M3 Competition Limousine (2021+) BMW G81 M3 Touring (2023+) BMW G81 M3 Competition Touring (2023+) BMW G82 M4 Coupe (2021+) BMW G82 M4 Competition Coupé (2021+) BMW G83 M4 Cabrio (2021+) BMW G83 M4 Competition Cabrio (2021+)  Note: This is NOT an original BMW product!

Made from state-of-the-art pre-preg carbon fibre, these side diffusers for the rear emphasise the character of your vehicle and make it stand out both on the road and online. Why do we use pre-preg carbon fibre?Unlike normal carbon fibre, pre-preg carbon is reinforced to increase strength and durability.It can also be a staggering 70% lighter than other carbon fibre options, ideal for weight saving.In terms of quality, pre-preg carbon is far more consistent, meaning that the likelihood of imperfections is drastically reduced.of imperfections is drastically reduced.The manufacturing process eliminates unwanted air bubbles and results in a perfect, smooth, sleekand high-gloss finish that is the ultimate piece to complement your vehicle. When you buy Pre-Preg, you are investing in a higher quality, more durable part that will outlast other forms ofoutlast other forms of carbon fibre and potentially save you money in the long run. Details:- 100% pure prepreg carbon fibre construction- OEM style weave- High-gloss finish- with parts certificate according to §19.3 Scope of delivery:1x set of side diffusers Compatible vehicles:- BMW G80 M3 Sedan (2021+)- BMW G80 M3 Competition Sedan (2021+)- BMW G81 M3 Competition Touring (2021+)Note: This is NOT an original BMW product!

The side centre consoles give your vehicle an upscale look and feel. When you buy Pre-Preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run. Details:- 100% carbon fibre construction- High gloss finish- Fit guarantee- registration free Scope of delivery:1x set of centre console side covers (1x right / 1x left) Compatible vehicles:- BMW G87 M2 - BMW G80 M3 incl. Competition Saloon (2021+)- BMW G81 M3 incl. Competition Touring (2023+)- BMW G82 M4 incl. Competition Coupé (2021+)- BMW G83 M4 incl. Competition Convertible (2021+) Note: This is NOT an original BMW product!

Transform your G8X into a high-performance powerhouse with the BlackBoost cooling air intake system. Experience more power, style and driving dynamics with this premium upgrade. In the world of performance modifications, the airbox is one of the most important engine components you should upgrade. The factory airbox is very restrictive in terms of airflow and filter area. Our cooling air intakes are designed and engineered to overcome these factory restrictions and deliver the maximum airflow with the lowest possible temperatures given the space available. The BlackBoost Cold Air Intakes are designed to be flush with the bonnet of the vehicle and ensure a consistent seal with the rubber seals of the airbox, whilst also ensuring a large surface area to work properly. The BlackBoost twin-flow filters are specifically designed to maximise airflow and surface area. The BlackBoost intake kit is a plug-and-play solution that works perfectly without further customisation and requires no additional software tuning. It also works smoothly in combination with turbo upgrades, downpipes, methanol injections etc. to unleash the necessary airflow and utilise the full capacity of the engine for those aiming for 1000+ WHP figures. Scope of delivery:- Powder coated airbox- Filters- BlackBoost CFD developed filter adapter Key Features:- Proven power increase from 8 to 30+ hp on production vehicles- Improved responsiveness across the entire rev range- Optimised airflow and increased volume range compared to standard equipment- Increased surface area of the filter elements- Can support airflow for 1000+ WHP configurations- Larger filter element surface area compared to OEM- Plug-and-play bolt-on installation- No ECU tuning required Compatible vehicles:BMW M2 (G87) 338kW | 460PS | 2993cm³ | S58BMW M2 (G87) 353kW | 480PS | 2993cm³ | S58BMW M3 (G80) 353kW | 480PS | 2993cm³ | S58BMW M3 (G80) Competition 375kW | 510PS | 2993cm³ | S58BMW M3 (G80) Competition 375kW | 510PS | 2993cm³ | S58 | xDriveBMW M3 (G80) Competition 390kW | 530PS | 2993cm³ | S58 | xDriveBMW M3 (G80) CS 405kW | 551PS | 2993cm³ | S58 | xDriveBMW M3 (G81) Competition 375kW | 510PS | 2993cm³ | S58 | xDriveBMW M3 (G81) Competition 390kW | 530PS | 2993cm³ | S58 | xDriveBMW M4 (G82) | 353kW | 480PS | 2993cm³ | S58BMW M4 (G82) Competition | 375kW | 510PS | 2993cm³ | S58BMW M4 (G82) Competition M | 375kW | 510PS | 2993cm³ | S58 | xDriveBMW M4 (G82) CSL | 405kW | 551PS | 2993cm³ | S58 | xDriveBMW M4 (G82) CSL | 412kW | 560PS | 2993cm³ | S58 | xDriveBMW M4 (G83) Competition M | 375kW | 510PS | 2993cm³ | S58 | xDrive

Plug and Play suitable for the following models: BMW G80/81 M3 (Competition) 353-375KW/480-510hp from 2021+ BMW G82/G83 M4 (Competition/CSL) 353-405KW/480-550hp from 2021+ Note: only for vehicles with automatic transmission! Now with parts certificate!Optimise the performance and reliability of your S58 with the Wagner Tuning Competition transmission oil cooler kit. This essential kit for all racing enthusiasts offers superior cooling performance and ensures that the oil temperature always remains in the optimum range, even under extreme conditions. Features:Extended cooling surface: The frontal airflow area has been increased by an impressive 81.6%, allowing for significantly more efficient cooling.Larger mesh volume: With a 93.6% larger mesh volume, this transmission oil cooler ensures maximum heat dissipation and keeps the oil temperature stable even under high loads.Optimum performance: Specially developed for performance-enhanced vehicles, this kit guarantees constant and optimum oil cooling to keep the oil pressure stable and extend the service life of the transmission.Easy installation: The plug & play design enables quick and easy installation, so you can have your vehicle up and running in no time at all. Scope of delivery:1x oil cooler (black coated)1x mounting material1x parts certificate Experience the perfect balance between performance and reliability:The Wagner Tuning Competition transmission oil cooler kit is the ideal addition for your S58. Enjoy the benefits of improved cooling and stable performance that impresses even under the most demanding conditions. With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

Here we present our display for the M models of the G series. Access to all data from the engine control unit:So ALL. The sensors are queried directly via Can Bus and are displayed on our tried-and-tested MFD32. The display for the G-series comes with a vehicle-specific panel and fits into the interior like an original part. The sensors are queried via the manufacturer-specific Can Bus protocol. We have optimised the protocol to achieve maximum polling speed. Details:- Integrates perfectly into the vehicle interior- Up to 128 sensors can be interrogated- 10 individually configurable views with our DSS - Display Setup Software- ready-made views for a quick start with our display- simply plug and play via our cable set - plug in, done- 4 additional analogue inputs for exhaust gas temperature, oil pressure and more- Ethanol sensor connection directly to the display- Best readability - optional anti-reflective film included- Query the sensors like manufacturer diagnostic tools Performance metre:Measure your acceleration times in our performance widget - 0-100, 100-200, 0-200 Data jogging:Log all data to the internal SD card. Whether "on-demand" (start with a tap) or permanently. All data from your last turn is saved. Preset alarms:Preset alerts can be easily activated and customised. For example, receive a large warning message if the exhaust gas temperature is above 900 degrees. 4 additional analogue inputs:Additional temperature and/or pressure sensors can be connected for further monitoring options, e.g. exhaust gas temperature or exhaust gas back pressure. An ethanol sensor can be connected to one of the digital inputs. Read out/delete errors:Read out errors from the engine control unit in plain text and also delete them Customised designWhether it's the customised start screen or the selection from a variety of different widgets. Make the display your display! Access to all data from the engine control unit:We supply your display with a ready-made TRI file as standard. All sensors that are queried are defined here. Temperatures:Engine water temperature, intake temperature, exhaust temperature, transmission temperature Pressures:Boost pressure, ambient pressure, oil pressure Lambda/mixture:Lambda value target/actual, short-term lambda adjustment, long-term lambda adjustment, MAF, engine load, torque Driver dynamics:Brake pressure, vehicle speed, throttle angle/gas pedal position Other:Engine speed, total ignition angle, gear, battery voltage, ignition angle reduction per cylinder Analogue inputs:Additional sensors can be added here: Oil temperature, petrol pressure, oil pressure, exhaust gas temperature, etc. but also an ethanol sensor (Flex Fuel) If values are missing, they can easily be added. ATTENTION: not every engine offers all values! For which engines and models is the G-series display:The display bezel fits all G-series (G80/G81/G83/G87) left-hand drive (LHD) vehicles that have the ID7 display installed. The pre-assembled bezel does not fit vehicles with the ID8 monitor! A version for right-hand drive vehicles (RHD) is also available. We currently support the following engines, unlisted engines can be added on request:- B48, B57, B58, M54, M57, N13, N20, N47, N52, N54, N55, N57, S55, S58, S63 MFD32 Technical data:- Dimensions: 89 x 60mm - Hardware: 3.2" TFT screen, touchscreen, MicroSD, MicroUSB- Symmetrical display - ideal for rotating it by 90- Views can be freely configured directly on the display or with our DSS - Display Setup Software on the PC- Up to 64 widgets per display- 64 sensors (Can Bus + internal)- 10 views- 4x analogue inputs- 2x speed input- Optional external switching flash- Can bus switching Supported values:Many customers always ask: "Which values can I query from my control unit? The answer: "ALL". Our MFD32 is compatible with ISO 11898-2 and SAE J2284.The control unit manufacturers themselves determine which values are sent via the CAN bus interface. The documentation is important here - possibly even in the form of a DBC file that can be imported directly. You can also access our extensive list of already implemented control units. This can be found in the download area. A total of up to 50 sensors can be queried if the manufacturer supports this.Broadcast data as well as OBD2 queries via Can Bus (11bit/29bit) are implemented. Special protocols such as TP2.0 from VW/Audi and UDS are also available. DSS - Display Setup Software:With our DSS - Display Setup Software, the display can be conveniently configured on the PC. The Can Bus protocol can be customised, you can import DBC files and design the displays with your own widgets.The log viewer downloads log files from the display. These can then be viewed and values can be individually selected and scaled.An in-built Can Bus logger allows you to take a close look at the log. This can be used to reverse-engineer unknown Can Buses.

Upgrade your G20/G80 with these carbon fibre doors that enhance both style and performance. Details:- Carbon fibre doors, made from high quality prepreg carbon fibre- Guaranteed accuracy of fit, 1:1 from the original- Largely reduced weight, the weight of the carbon fibre doors is less than 1/2 of the original doors.- Price is for 4 doors - front and rear Features:- Lightweight design: made from high quality carbon fibre, these doors are significantly lighter than the stock doors and reduce the overall weight of the vehicle for improved agility and acceleration.- Superior strength: Carbon fibre offers exceptional strength and rigidity, ensuring high durability and resilience while maintaining a slim profile.- Premium finish: The doors feature a high-gloss carbon fibre weave that gives your G20/G80 a refined, race-inspired look and complements its sporty design.- Exact fit: Designed specifically for the G20/G80, these doors offer a precise fit and seamless integration that meets OEM standards for alignment and function.- Improved performance: By reducing weight, these doors contribute to better handling, braking behaviour and improved driving dynamics.- Professional installation recommended: For best results, professional installation is recommended to ensure proper alignment and functionality with your vehicle's systems. Care instructions:Regular cleaning: Maintain carbon fibre parts by cleaning them regularly with a soft cloth and a mixture of mild soap and water. Avoid abrasive cleaners or harsh detergents that could damage the surface.Use microfibre pads and cloths: Use microfibre pads and cloths when cleaning or applying protective coatings to avoid scratching the surface.Protect the product from the sun and chemicals: Avoid direct sunlight and harsh chemicals, as these can damage the carbon fibre. If possible, use protective covers or park your vehicle in shaded areas. Installation:Although the installation of this product is relatively simple for the skilled DIY enthusiast, we still recommend installation by a professional mechanic.No special tools are required to install this product. Scope of delivery:- 4 carbon fibre doors (2x front doors per FS/BFS, 2x rear doors per FS/BFS)- Required mounting parts Compatible vehicles:All G20/G80 modelsNote: This is NOT an original BMW product!