Water cooler Race-Spec | fits BMW M3 incl. CSL (E46) S54 | CSF Race

MOVIT DDE steel brake system 342x28mm (4 piston calliper) for the rear axle, from 18 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined. The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications. The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple layer of paint.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts Attention: The conversion means that only rims with at least 18 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. MOVIT sports brake callipers, 4-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force MOVIT sports brake discs, 342x28mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Maximum fading resistance- Special alloy for high thermal conductivity MOVIT comfort brake pads- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x handbrake calliper (depending on selected option)1x assembly material1x installation instructions and running-in instructions1x parts certificate Compatible vehicles:BMW 1 Series (F20/F21) (also M)BMW 3 Series (E90)BMW 3 Series (E46) M3BMW 3 Series (E46) M3 CSLBMW 3 Series (E92) M3

MOVIT DDE steel brake system 342x34mm (4 piston calliper) for the front axle, from 18 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined. The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications. The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple layer of paint.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts Attention: The conversion means that only rims with at least 18 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. MOVIT sports brake callipers, 4s3, 4-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force MOVIT sports brake discs, 342x34mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Maximum fading resistance- Special alloy for high thermal conductivity MOVIT brake pads, comfort BE-4s3- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x assembly material1x installation instructions and running-in instructions1x parts certificate Compatible vehicles:Audi A4 / S4 B7 / 8EAudi S3 8VBMW 1 Series E81 / E82 / E87 / E88BMW 3 Series E36BMW 3 Series E46BMW 3 Series E90BMW M3 E46BMW M3 E46 CSL

MOVIT DDE steel brake system 370x35mm (6 piston calliper) for the front axle, from 18 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined. The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications. The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple paint finish.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts Attention: The conversion means that only rims with at least 18 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. MOVIT sports brake callipers, 6s5, 6-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force MOVIT sports brake discs, 370x35mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Maximum fading resistance- Special alloy for high thermal conductivity MOVIT comfort brake pads, BE-6s1- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x assembly material1x installation instructions and running-in instructions1x parts certificate Compatible vehicles:BMW 1 Series F20 / F21 (also M)Ford Focus RS CB4 / MKIIAudi RS3 8PAudi RS4 B5Audi S4 Type 8D / B5BMW M3 E46BMW M3 E46 CSLBMW M3 E92Ford Mustang V Shelby GT 500Mercedes Benz W639 Vito / VianoVolvo XC90 1st gen. from 2011 onwardsVW Golf VII GTI / GTD 57 series pistonsVW Golf VII GTI / GTD 57 series pistonsVW GOLF VII GTI Clubsport / Performance 60 series pistonsVW Golf VII RVW Golf VII RVW T5 / T6 Multivan

Includes the following services: - Removing and replacing the connecting rod bearings - Check and measure crankshaft journals - Check and adjust the oil pump - Clean all parts - Wheel alignment - Oil & filter change - incl. all parts such as bearings, screws, seals, oil filter and engine oil (10W60) - Entry in the service booklet with BMW registration number stamp - 1 litre oil refill In addition, and depending on requirements, we can also replace the spark plugs and engine mounts for an additional charge. Please note: This service can only be carried out at our company headquarters!

Your vehicle is missing a data display! We have - the CANchecked display for E46 models. Access to all engine data:The sensors are queried directly via Can Bus and are displayed on our tried-and-tested MFD28. The display for the E-series comes with a vehicle-specific cover and fits into the interior like an original part. This means that the ventilation through the slots remains intact. Our display emulates a manufacturer tester so that all detailed values are available. We have optimized the protocol to achieve maximum polling speed. Details:- integrates perfectly into the vehicle interior- Up to 128 sensors can be queried- 10 individually configurable views with our DSS - Display Setup Software- ready-made views for a quick start with our display- simply plug and play via our cable set - plug in, done- 4 additional analog inputs for exhaust gas temperature, oil pressure and more- Best readability - optional anti-reflective film included- Query the sensors like manufacturer diagnostic tools Performance meter:Measure your acceleration times in our performance widget - 0-100, 100-200, 0-200 Data jogging:Log all data to the internal SD card. Whether "on-demand" (start with a tap) or permanent. All data from your last turn is saved. Preset alarms:Preset alarms can be easily activated and customized. For example, receive a large warning message if the exhaust gas temperature is above 900 degrees. 4 additional analog inputs:Additional temperature and/or pressure sensors can be connected for further monitoring options, e.g. exhaust gas temperature or exhaust gas back pressure. An ethanol sensor can be connected to one of the digital inputs. Read out/delete errors:Read out errors from the engine control unit in plain text and also delete them Individual designWhether it's the individual start screen or the selection from a variety of different widgets. Make the display your display! Driver Dynamics:We have developed a special view for all track drivers who want to further improve their driving style and become a second or two faster:- G-forces (lateral and longitudinal acceleration)- Vehicle speed- Steering angle- accelerator pedal position- Brake pressure This sensor system gives the driver the opportunity to aim for even higher speeds in bends and to hit the braking point even later. Together with the data log in the internal memory, which can be downloaded from the display after a track day, this offers a great opportunity to synchronize the data with a video. Access to all data from the engine control unit:We supply your display with a ready-made TRI file as standard. All sensors that are queried are defined here. Temperatures:Engine water temperature, oil temperature, intake temperature, exhaust temperature, transmission temperature Pressures:Boost pressure, boost pressure target, fuel pressure high pressure pump, exhaust back pressure, low pressure, brake pressure, oil pressure Lambda/mixture:Lambda value target/actual, injection correction, short-term lambda adjustment, total ignition angle Other:RPM, air mass (g/s), vehicle speed, throttle valve angle, battery voltage, gear, accelerator pedal position, longitudinal and lateral acceleration, steering angle, yaw angle, torque, power, boost pressure control valve activation If values are missing, they can easily be added. It always depends on the engine whether it supports the values, sometimes not all sensors are available. Attention: Not all values are available for all engines! For which engines and models is the display for E46:The display panel fits the following 3 Series E models:- M52, M54- S54- Other engines on request Read out and delete errors:Swipe down to access the "DTC" (Diagnostic Trouble Codes = fault memory). The display reads the fault memory from the engine. Optionally, you can also delete these directly on the display. Errors for the engine are displayed in plain text so that you can decide for yourself whether you can continue driving. MFD28 Technical data:- Dimensions: 70.3 x 52mm - Hardware: 2.8" TFT screen, touchscreen, MicroSD, MicroUSB- High-quality milled aluminum front frame- Symmetrical display - ideal for rotating it by 90- Views completely freely configurable on the PC with our DSS - Display Setup Software- Up to 64 widgets per display- 64 sensors (Can Bus + internal)- 10 views- 4x analog inputs- Optional external switching flash- Can bus switching- Can Bus protocols: UDS, KWP2000, OBD Supported values:Many customers always ask: "Which values can I query from my control unit". The answer: "ALL". Our MFD28 is compatible with ISO 11898-2 and SAE J2284.The control unit manufacturers themselves determine which values are sent via the CAN bus interface. The documentation is important here - possibly even in the form of a DBC file that can be imported directly. You can also access our extensive list of already implemented control units. This can be found in the download area. A total of up to 50 sensors can be queried if the manufacturer supports this.Broadcast data as well as OBD2 queries via Can Bus (11bit/29bit) are implemented. Special protocols such as TP2.0 from VW/Audi and UDS are also available. DSS - Display Setup Software:With our DSS - Display Setup Software, the display can be conveniently configured on the PC. The Can Bus protocol can be customized, you can import DBC files and design the displays with your own widgets.The log viewer downloads log files from the display. These can then be viewed and values can be individually selected and scaled.A built-in Can Bus logger allows you to take a close look at the log. This can be used to reverse-engineer unknown Can Buses.

Facts: Material: Carbon Manufacturer: Eventuri Parts certificate: For this product a certificate is available for certain regions and vehicles (details below) The Eventuri carbon intake system for the E46 has been developed to increase engine performance, improve handling and enhance the overall driving experience. The main aspects are the balance between aerodynamic efficiency and air intake temperature. An open system was chosen but with differences to other aftermarket airboxes. This can be recognised by the shape of the carbon housing and the position and shape of the air filter. The inverted cone-shaped filter ultimately results in the Venturi effect, creating a uniform laminar airflow. In the E46 in particular, the Eventuri kit not only delivers advantages in terms of performance and response behaviour, but the sound of the engine is now also more present. The airbox is manufactured using the prepreg carbon process. Parts certificate The manufacturer's specifications apply to installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT BMW M Coupé (M85) e1*xx/xx*0364*.. DE/AT BMW M Roadster (M85) e1*xx/xx*0364*.. DE/AT BMW M3 (M346) e1*xx/xx*0150*.. Compatible vehicles: VehicleVehicle typePower outputDisplacementEngine typeBMW 3 Series (E46) ConvertibleM3252kW / 343PS3246ccS54 B32BMW 3 Series (E46) CoupéM3252kW / 343PS3246cm³S54 B32BMW 3 Series (E46) CoupéM3 CSL265kW / 360PS3246cm³S54 B32

Facts: Material: Carbon Manufacturer: Eventuri Expert opinon: Material certificate Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeBMW 3 Series (E46) ConvertibleM3252kW / 343hp3246cm³S54 B32BMW 3 Series (E46) CoupéM3252kW / 343hp3246cm³S54 B32BMW 3 Series (E46) CoupéM3 CSL265kW / 360hp3246cm³S54 B32

Facts:Material: CarbonManufacturer: Eventuri The Eventuri philosophy of challenging the standard for existing aftermarket solutions is also reflected in the panel filters. The best design, relentless testing to perfection and the latest prototyping methods result in an exceptional product.With the panel filters, the focus is on performance, which is guaranteed by CFD analyses, airflow tests, inlet temperatures and extensive dyno tests.Each panel filter is designed to fit into the OEM filter housings. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine type BMW 3er (E46) CabrioM3252kW / 343hp3246cm³S54 B32BMW 3er (E46) CoupéM3252kW / 343hp3246cm³S54 B32BMW 3er (E46) CoupéM3 CSL265kW / 360hp3246cm³S54 B32

CSF Race Water cooler for BMW E46 Triple Pass coolerFeatures CSF's exclusive B-Tube technology and 6.5mm multi-fin height, 1-hour polished mirror finish, CNC machined mounting brackets True drop-in fit with no modifications requiredCSF manufactures the most advanced and efficient radiator cores in the industry by using innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation. These techniques allow CSF to stay ahead of the curve in radiator technology! “B-Tube” technologyIn contrast to a normal oval “O” type radiant tube, CSF uses a specially developed tube in the shape of a “B”. These “B-Tubes” are carefully formed and then soldered over the seam to seal it. CSF is able to use thinner and lighter aluminum material (better cooling efficiency) because this design is actually stronger than normal welded “O” shape tubes. The design (inlet in the center of the tube which is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over normal tubes. You get the efficiency of 2 smaller tubes versus 1 large tube with the same space criteria. With “B-Tubes” you can get “Dual Liquid Laminar Flow”. High Efficiency Multi Louvered FinCSF uses high efficiency multi-louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured, calculated and tested in our wind tunnel lab for maximum heat dissipation efficiency for each application. MaterialThe CSF Race-Spec water cooler is made of durable aluminum. This material is characterized by its excellent thermal conductivity, corrosion resistance and durability. This ensures a long service life for this part. InstallationThanks to the replacement assembly, installation is as easy as with an original part. This means you can replace your old radiator with this CSF Race-Spec water cooler without any complications. In terms of both fit and installation technology, this radiator is the same as the original part and can therefore be installed without any modifications or adjustments. Compatible vehicles:Make Model Type Year of manufactureBMW 3 Convertible (E46) M3 2001-2006BMW 3 Coupe (E46) M3 2000-2006BMW 3 Coupe (E46) M3 CSL 2003-2003

This wheel spacer is a push-through system with double centring. This ensures optimum driving behaviour and prevents unwanted vibrations. Technical information: - Disc thickness: 10mm per wheel (= 20mm per axle) - Bolt circle(s)*: 120/5 + 120/5 - Centre collar diameter: 72.6mm - Chamfer size PHO (standard disc - rim side): 4x30° - Hub hole depth NLT (standard disc - vehicle side): 12mm Package contents: 4 pieces incl. 20 screws *This may be a so-called double bolt circle. The item can be used for vehicles with both bolt hole circles. Compatible vehicles: BMW Vehicle designation: Year of manufacture: Type: 1 Series 2004-2011 (E81, E87) - 187, 1K2, 1K4 1 Series 2011-2019 (F20, F21) - 1K4, 1K2 1 Series Convertible 2008-2013 (E88) - 182, 1C 1 Series Coupe 2008-2013 (E82) - 182, 1C 1 Series M Coupe 2011-2012 (E82) - M-V 2500, 2800, 3.0i, 3.3i 1968-1977 (E3) 2800CS, 3.0CS, 3.0CSi, 3.0CSL 1968-1975 (E9) 2 Series 2014-2021 (F22) - 1C 2 Series Convertible 2015-2021 (F23) - 1C 3 Series 1990-2000 (E36) - 3B, 3C, 3CG 3 Series 1998-2005 (E46) - 346L 3 Series 2005-2011 (E90) - 3L, 390L 3 Series 2011-2019 (F30) - 3L 3 Series Convertible 1990-2000 (E36) - 3B, 3C, 3CG 3 Series Convertible 2000-2007 (E46) - 346R, 2C 3 Series Convertible 2007-2011 (E93) - 3C, 392C 3 Series Compact 1994-2000 (E36) - 3B, 3C, 3CG 3 Series Compact 2001-2004 (E46) - 346K 3 Series Coupe 1990-2000 (E36) - 3B, 3C, 3CG 3 Series Coupe 1999-2006 (E46) - 346C 3 Series Coupe 2006-2013 (E92) - 3C, 392C 3 Series Gran Turismo 2013-2019 (F34) - 3-V 3 Series Touring 1990-2000 (E36) - 3B, 3C, 3CG 3 Series Touring 1999-2005 (E46) - 346L 3 Series Touring 2005-2011 (E91) - 3K, 390L 3 Series Touring 2012-2019 (F31) - 3K 3 Series xDrive 1998-2005 (E46) - 346x 3 Series xDrive 2005-2011 (E90, E91, E92) - 390X, 3L 4 Series 2013-2021 (F32) - 3C 4 Series Convertible 2014-2021 (F33) - 3C 4 Series Gran Coupe 2014-2021 (F36) - 3C 5 Series 1972-1981 (E12) - 5 5 Series 1981-1987 (E28) - 5/1 5 Series 1987-1996 (E34) - 5/H 5 Series 2003-2010 (E60) - 560L 5 Series 2010-2016 (F10) - 5L 5 Series GT 2009-2017 (F07) - K-N1 5 Series Touring 2003-2010 (E61) - 560L 5 Series Touring 2010-2017 (F11) - 5K, K-N1 5 Series xDrive 1991-1996 (E34) - X5/H 5 Series xDrive 2008-2010 (E60, E61) - 560X 6 Series Convertible 2004-2010 (E64) - 663C 6 Series Convertible 2011-2018 (F12) - 6C 6 Series Coupe 2003-2010 (E63) - 663C 6 Series Coupe 2011-2018 (F13) - 6C 6 Series Gran Coupe 2012-2018 (F06) - 6C 6 Series incl. M635 CSi 1975-1989 (E24) - 6, 6/1, 6CS, 6CS/1 7 Series 1977-1986 (E23) - 7 7 Series 1986-1994 (E32) - 7/1 7 Series 1994-2001 (E38) - 7/G 7 Series 2001-2008 (E65) - 765 7 Series 2008-2015 (F01, F02) - 701, 7L, HY 8 Series 1989-1999 (E31) - 8/E, M8/E M1 1978-1981 (E26) M2 2015-2021 (F87) - M3 M2 CS 2020 (F87) - M3 M3 1986-1991 BMW M3 (E30) M3 1996-2000 (E36) - M3B, M3/B M3 2000-2006 (E46) - M346 M3 2007-2014 (E90, E92, E93) - M390, M3 M3 2014-2018 (F80) - M3 M4 2014-2020 (F82; F83) - M3 M5 1974-1981 (E12) - 5 (M535i) M5 1985-1987 (E28) - 5/1 M5 1988-1995 (E34S) - M5/H M5 2005-2010 (E60) - M560 M5 2011-2017 (F10) - M5/6 M6 Convertible 2006-2010 (E64) - M560 M6 Convertible 2012-2018 (F12) - M5/6 M6 Coupe 2005-2010 (E63) - M560 M6 Coupe 2012-2018 (F13) - M5/6 M6 Gran Coupe 2013-2018 (F06) - M5/M6 X1 2009-2015 (E84) - X1 X3 2004-2010 (E83) - X83 X3 2010-2017 (F25) - X-N1, X3 X4 2014-2018 (F26) - X3 X5 1999-2006 (E53) - X53 Z3 Coupe 1995-2002 (E36/8) - R/C Z3 M Coupe 1995-2002 (E36/8) - MR/C Z3 M Roadster 1995-2002 (E36/7) - MR/C Z3 Roadster 1995-2002 (E36/7) - R/C Z4 2002-2006 (E85) - Z85 Z4 2009-2016 (E89) - Z89, ZR Z4 M Coupe 2006-2008 (E85) - M85 Z4 M Roadster 2006-2008 (E85) - M85 Z8 2000-2003 (E52) - Z52 X5 M 2009-2015 (E70) - X7M X6 2008-2014 (E71) - X70 X6 M 2009-2015 (E71) - X7M Bentley Vehicle designation: Year of manufacture: Type: Brooklands 2007-2011 RBS_ Honda Vehicle designation: Year of construction: Type: Odyssey 1st generation 1994-1999 RA1, RA5 Odyssey 2nd generation 1999-2003 RA6, RA9 Odyssey 3rd generation 2003-2008 RB1, RB2 Odyssey 4th generation 2008- RB3, RB4 Land Rover Vehicle designation: Year of manufacture: Type: Discovery III 2004-2009 LA Discovery IV 2009-2016 LA Range Rover 2002-2012 LM (L322) Range Rover 2012-2021 LG (L405) 4th Gen. Range Rover 2021- 5th Gen (L460) Range Rover Sport 2022- 3rd Gen (L461) Range Rover Sport / SVR 2005-2013 LS Range Rover Sport / SVR 2013-2022 LW Mini Vehicle designation: Year of manufacture: Type: Mini Countryman 2010-2017 (R60) - UKL/X, ULK-N1 Mini Paceman 2013-2016 (R61) - UKL-C/X Rolls Royce Vehicle designation: Year of construction: Type: Ghost 2009-2020 GF Wraith 2013- GF

ST wheel spacers System D25, 8, 10, 11, 12, 12.5, 15, 16, 17, 17.5, 18, 20, 21 or 25 mm per wheel Push-through system with bolt circle holes and double centring. The centre hole for centring on the wheel hub and an additional centring collar on the wheel spacer for the rim ensure optimum concentricity. Longer wheel bolts are required to fit the rim. - Scope of delivery: 2 wheel spacers system D2- Made of high-quality aluminium (steel in individual cases)- Black anodised for perfect corrosion protection- Dynamic appearance of the vehicle / perfect look- Improved driving dynamics due to wider track width- Matching wheel bolts (in black and silver) available Technical information:Width per axle: 22mmMounting type: Bolt-through fasteningDesign / material: D2/aluminiumBolt circles: 5x120Hub hole bore: 72,6mmCentre collar: withMounting position: Front axle or rear axleApproval type (vehicle approval): Parts certificate (§19.3)Scope of delivery: Set (2 pcs.) Compatible vehicles:BMW 1 Series (E81) 187, 1K2 09/2006-09/2012BMW 1 Series (E82) Coupe 182, 1C, M-V 10/2006-10/2013BMW 1 Series (E87) 187, 1K4 02/2003-01/2013BMW 1 Series (E88) Convertible 182, 1C 12/2007-12/2013BMW 1 Series (F20) 1K4 07/2011-06/2019BMW 1 Series (F21) 1K2 12/2011-BMW 2 Series (F22, F87) Coupe 1C, M3 10/2012-BMW 2 Series (F23) Convertible 1C 03/2014-BMW 3 Series (E30) 3/1, 3/A, M3 09/1982-03/1992BMW 3 Series (E36) 3C, 3/C, M3/B 09/1990-11/1998BMW 3 Series (E36) Compact 3C, 3/CG, 3/CNG 01/1994-08/2000BMW 3 Series (E36) Coupe 3B, 3/B, M3B, M3/B 10/1991-05/1999BMW 3 Series (E36) Convertible 3B, 3/B, 3/R, M3 B, M3/B 03/1993-11/1999BMW 3 Series (E36) Touring 3/C 08/1994-12/1999BMW 3 Series (E46) 346L, 346X 12/1997-05/2005BMW 3 Series (E46) Convertible 346R, M346 04/2000-12/2007BMW 3 Series (E46) Compact 346K 03/2001-02/2005BMW 3 Series (E46) Coupe 346C, M346, M390 12/1998-07/2006BMW 3 Series (E46) Touring 346L, 346X 06/1999-07/2005BMW 3 Series (E90) 390L, 390X, 3L, M3, M3 GTS, M390 02/2004-02/2012BMW 3 Series (E91) Touring 390L, 390X, 3K 12/2004-12/2012BMW 3 Series (E92) Coupe 390X, 392C, 3C, M-V, M3, M3 GTS, M390 01/2005-12/2013BMW 3 Series (E93) Convertible 392C, 3C, M3, M390 05/2006-12/2013BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 03/2011-10/2018BMW 3 Series (F31) Touring 3K 07/2012-06/2019BMW 3 Series (F34) Gran Turismo 3-V 07/2012-BMW 4 Series (F32, F82) Coupe 3C, M3, M3 GTS 07/2013-BMW 4 Series (F33, F83) Convertible 3C, M3 10/2013-BMW 4 Series (F36) Gran Coupe 3C 03/2014-BMW 5 Series (E28) 5, 5/1 05/1981-12/1987BMW 5 Series (E34) 5/H, M5/H, X5/H 02/1987-12/1995BMW 5 Series (E34) Touring 5/H, M5/H, X5/H 07/1991-07/1996BMW 5 Series (E60) 560L, 560X, M5/M6, M560 12/2001-03/2010BMW 5 Series (E61) Touring 560L, 560X, M5/M6, M560 03/2004-12/2010BMW 5 Series (F07) Gran Turismo GT 01/2009-02/2017BMW 5 Series (F10) 5L, GT, HY, KL, M5/M6 01/2009-10/2016BMW 5 Series (F11) Touring 5K, GT 11/2009-02/2017BMW 6 Series (E24) BMW 6 CS, BMW 6 CS/1 10/1975-04/1989BMW 6 Series (E63) 663C, M5/M6, M560 09/2003-12/2010BMW 6 Series (E64) Convertible 663C, M5/M6, M560 03/2004-12/2010BMW 6 Series (F06) Gran Coupe 6C, M5/M6 03/2012-10/2018BMW 6 Series (F12) Convertible 6C, M5/M6 12/2010-06/2018BMW 6 Series (F13) Coupe 6C, M5/M6 07/2011-10/2017BMW 7 Series (E32) 7/1 03/1985-10/1994BMW 7 Series (E38) 7/G, 7/GK 03/1994-11/2001BMW 7 Series (E65, E66, E67) 765, 767, 767P 07/2001-12/2009BMW 7 Series (F01, F02, F03, F04) 701, 7L, HY 02/2008-12/2015BMW 8 Series (E31) 8/E, M8/E 01/1990-12/1999BMW X1 (E84) X1 03/2009-06/2015BMW X3 (E83) X83 01/2003-12/2011BMW X3 (F25) X3 09/2010-08/2017BMW X4 (F26) X3 05/2013-03/2018BMW X5 (E53) X53 01/2000-12/2006BMW X6 (E71, E72) HY, M7X, X-N1, X6, X70 06/2007-07/2014BMW Z3 (E36) Coupe MR/C, R/C 04/1997-06/2003BMW Z3 (E36) Roadster MR/C, R/C 10/1995-01/2003BMW Z4 (E86) Coupe M85, Z85 03/2006-01/2009BMW Z4 (E85) Roadster M85, Z85 09/2002-12/2009MINI COUNTRYMAN (R60) UKL/X 08/2010-10/2016MINI PACEMAN (R61) UKL-C/X 03/2012-10/2016

The Wagner Tuning Competition Gen.2 intercooler kit fits the following model:Hyundai I30 N Performance 206KW/280PS (2021+) Experience the ultimate performance boost for your Hyundai i30 N with the impressive Wagner Tuning high performance intercooler. Specially developed to meet the demanding requirements of the Hyundai i30 N, this intercooler is equipped with a new type of competition mesh (Tube Fin), which impresses with its dimensions of 580 mm x 150 mm x 135.4 mm + 580 mm x 62 mm x 70 mm (stepped mesh: 14.3 litres). With a 44.3 % larger inflow area and 101.4 % larger mesh volume compared to the original intercooler, this high-performance mesh offers unrivalled performance. The high-quality cast aluminium end boxes have been CAD designed and optimised using CFD simulations to ensure ideal internal airflow. The result is outstanding cooling properties with minimal back pressure. In addition, the innovative high-performance mesh enables sufficient airflow to neighbouring components such as the water cooler through the use of a specially manufactured air baffle. This kit is therefore perfect for racing and offers optimum cooling of the supercharged air with a significant increase in performance. With an anti-corrosion coating, which has outstanding heat conduction properties, the Wagner Tuning intercoolers are optimally protected against environmental influences and offer a long-lasting and efficient cooling effect. Installation is effortless at the original mounting points and is easy to carry out thanks to the plug-and-play system. Like all our products, this intercooler is also subject to strict quality control. With an inlet and outlet diameter of Ø65mm, this intercooler enables optimum flow and contributes to an impressive increase in performance for your Hyundai i30 N. Take your vehicle to a new level and experience the full power that this high-performance intercooler offers. Boost your performance and dominate the road like never before. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 44.3% larger flow area- 104.4% more net volume- Minimal back pressure- Inlet and outlet diameter of Ø65mm- Plug & Play OEM intercooler:V = 7.1 LITRESA = 79360 mm² Wagner Tuning intercooler:V = 14.3 LA = 114492 mm²G = 9.3kg Scope of delivery:1 intercooler2 silicone hoses1 air baffle1 mounting material1 installation instruction Attention: Not authorised in the area of the StVZO.

Facts:- Plug & Play installation using illustrated installation instructions- Special wiring harness for your vehicle- High-quality electronics “Made In Germany”- Electronic components with product qualification for motor vehicles according to AEC-Q100 installed- Support from us as co-developer and manufacturer Scope of delivery:The scope of delivery includes the motorsport add-on module, an engine-specific wiring harness, illustrated installation instructions in DE/EN and a BYPASS connector, which you can use to restore your vehicle to series production. Compatible vehicles: ManufacturerVehicleVehicle typeEngine capacityPowerEngine type BMWM340d xDriveG20/G212993cm³250kW / 340hpB57D30B, JA1 BMWM440d xDriveG22/G232993cm³250kW / 340hpB57D30B, JA1 LEGAL INFORMATION: THE INSTALLATION OF ADDITIONAL ELECTRONICS IS A STRUCTURAL MODIFICATION TO THE MANUFACTURER'S ELECTRONICS. WITHOUT REGISTRATION IN THE VEHICLE DOCUMENTS BY MEANS OF AN INDIVIDUAL CERTIFICATE FROM TÜV; DEKRA OR OTHER RECOGNIZED TESTING INSTITUTES, THE INSTALLATION WILL INVALIDATE THE OPERATING LICENSE. IF USED ON PUBLIC ROADS, THIS WILL RESULT IN THE LOSS OF INSURANCE COVER. WE DO NOT CURRENTLY HAVE A PARTS CERTIFICATE FOR YOUR VEHICLE. THEREFORE, THIS SYSTEM IS EXCLUSIVELY SUITABLE FOR MOTORSPORT. ATTENTION: IF YOU USE THE ADDITIONAL ELECTRONICS, YOU MAY LOSE YOUR WARRANTY CLAIMS AGAINST THE SELLER OR WARRANTY CLAIMS AGAINST THE MANUFACTURER. IF YOU HAVE ANY FURTHER QUESTIONS, PLEASE DO NOT HESITATE TO CONTACT US!

Competition intercooler upgrade kit plug and play suitable for:Mini Cooper S F54/F55/F56/F60 MKB: B46 & B48 (141KW/192hp) 2014+Mini One D F54/F55/F56 MKB: B37 (70KW/95hp) 2014+Mini Cooper D F54/F55/F56 MKB: B37 (85KW/116hp) 2014+Mini Cooper SD F54/F55/F56 MKB: B47 (125KW/170hp) 2014+Mini JCW F57 MKB: B48B20 (170KW/231hp) 2016+ (not suitable for JCW B48.D)Not suitable for JCW models of the F54/55/56/60 model seriesNot suitable for vehicles with engine code letters B48.C / B48.A / B38.C / B38.M / B38.B (LCI models) Discover the Competition high-performance intercooler for your Mini F54 Cooper S - More power and performance for your Mini! We proudly present our Competition High Performance Intercooler, specially designed to increase the power and efficiency of your Mini F54 Cooper S. Here are the reasons why our intercooler is a must-have upgrade: With mesh dimensions of 580mm x 231mm x 110mm (stepped), our intercooler offers a 53% larger flow area and 52% more charge air volume compared to the factory intercooler. This means more air for your engine, resulting in a noticeable increase in performance. Our Competition high performance mesh has been specifically designed to provide excellent cooling characteristics. Whether you're on the track or on the road, your engine will always remain at the optimum operating temperature. Despite its impressive performance, our intercooler is lightweight and weighs just 9.2 kg. This minimizes additional weight and ensures better vehicle dynamics. Our freeform cast aluminium end boxes have been CAD designed to maximize internal airflow. This significantly reduces the back pressure compared to the standard intercooler. All our intercoolers are finished with an anti-corrosion coating which not only ensures longevity but also provides excellent heat dissipation properties. Our kit is completely ready to install and can be easily replaced with the factory intercooler. No complex adjustments required. Simply plug-and-play. Our intercooler has been tested under extreme conditions with up to 6 bar and is pressure stable. This upgrade is perfect for racing enthusiasts. Maximize the performance of your Mini F54 Cooper S with our Competition high performance intercooler. Visit our website for more information and to order your kit. Benefits:- improved cooling performance- 53% larger flow area- 52% more charge air volume- less back pressure- Plug & Play Dimensions original intercooler:585mm x150mm x 95mmV=8.3 litersA=877.5 cm² Wagner Tuning intercooler dimensions:580mm x 231mm x110mm /steppedV=12.6 litersA=1340 cm² Scope of delivery:1 intercooler1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.

The Wagner Tuning Competition intercooler kit EVO 2 fits the following vehicles:Volkswagen T5.1 2,5 TDI 96KW/131hp 2003-2009*Volkswagen T5.1 2,5 TDI 128KW/174hp 2003-2009** Vehicles with MKB: AXB, AXC, AXD, AXE, BLJ, BRR, BRS require the Wagner Tuning silicone hose kit on the driver's side.Optimize the performance and reliability of your VW T5.1 2,5 TDI with our high quality silicone hose kit. This kit has been specially designed to ensure a perfect fit and maximum performance in conjunction with our original intercooler. Precise fit: Each silicone hose kit has been precision manufactured to ensure a perfect fit and easy installation. The included hose clamps ensure a secure and reliable connection.High quality materials: Made from high quality silicone that offers high temperature resistance and durability. These hoses are designed to withstand the stresses of the engine and ensure optimum performance.Compatibility: This silicone hose kit is exclusively compatible with our original intercooler, allowing for seamless integration and improved airflow dynamics.Stylish design: In addition to their functionality, the silicone hoses also offer an attractive design that improves the appearance of your VW T5.1 2.5 TDI. Attention: This hose kit is only compatible with the original Wagner Tuning intercooler. Scope of delivery:2 silicone hoses4 hose clamps1 aluminum adapter Note: Please note that the item image is for illustrative purposes only and the actual shape of the kit may differ slightly.