Free shipping
info@aulitzkytuning.de
+49 (0)9874 6891630

Water cooler kit | fits BMW M2 Competition (F87) 411hp S55 | Wagner Tuning

€2,290.00*

Delivery time: approx. 4 weeks. Exact delivery time on request*.

place a request
Product number: WT400001013
Product information "Water cooler kit | fits BMW M2 Competition (F87) 411hp S55 | Wagner Tuning"

Suitable for the following models:
BMW F87 M2 Competition 302kW/411hp

With parts certificate!

The 3.0 liter S55B30 turbo engine is equipped with an indirect charge air cooling circuit. This means that the charge air is not cooled using the ambient air as a cooling medium (as usual), but with the aid of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water coolers come into play. The newly developed competition racing nets of the WAGNERTUNING high-performance water coolers increase the radiator volume of the standard water cooler by 89% for the front and 94% for the side. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the adjacent components (e.g. the engine water cooler located behind it) sufficient air flow for heat exchange. Furthermore, the increased cooling water volume allows the entire system thermal to be kept at a lower level over a longer period of time.

All WAGNERTUNING water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. The installation of the system is also uncomplicated and almost plug & play with the help of our installation instructions.

Dimensions OEM water cooler (front):
590 mm x 308 mm x 25 mm
V = 4.5 liters
A = 1817 cm²

WT water cooler dimensions (front):
568 mm x 468.4 mm x 32 mm
V = 8.5 liters (+89%)
A = 2660.5 cm² (+46.4%)

OEM water cooler dimensions (side):
250 mm x 165 mm x 40 mm
V = 1.65 liters
A = 412.5 cm²

WT water cooler dimensions (side):
252 mm x 188 mm x 68 mm
V = 3.2 liters (+94%)
A = 473.8 cm² (+14.9%)

Scope of delivery:
1x front water cooler (low-temperature circuit)
1x side water cooler (low-temperature circuit)
1x carbon air duct for the side water cooler
1x mounting material
1x installation instructions
1x parts certificate

With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Zuletzt gesehene Produkte

Zuletzt gesehene Produkte

Coilover springs 25-35/10-20mm | fits BMW M5 Sedan (G90) | 23037-3 | H&R
H&R coilover springs for the G90 Sedan H&R coil springs are specially tuned to deliver noticeably better performance in everyday use without any significant loss of comfort. Details: Front lowering: 25-35 mm Rear lowering: 10-20 mm Axle load: Front up to 1475 kg / Rear up to 1550 kg For standard dampers with and without electric adjustment With parts certificate Product overview: Sporty look and performance Stepless lowering of the vehicle's center of gravity (within the tested adjustment range) For standard dampers with and without electric adjustment Function of electrically adjustable dampers remains unrestricted Optimized driving dynamics With parts certificate Developed and produced in Germany Compatible vehicles: BMW M5 G90 (Sedan) 4.4l 535kW plug-in hybrid all-wheel drive (585 hp)

€1,207.00*
Front lip Carbon | fits BMW M3/M4 incl. Competition/CS (F80/F82/F83) S55 | Vorsteiner
The Vorsteiner carbon front lip for the F80 and F82 leaves no questions unanswered. Visually, the mixture of extreme sportiness and pure elegance is particularly impressive! The front lip is made entirely of carbon fibre and additionally coated with a 4-stage clear coat to protect it from UV rays. Expertise: Material certificate Compatible vehicles:BMW 3 (F30, F80) M3 CS 2018-2018BMW 3 (F30, F80) M3 Competition 2016-2018BMW 4 Convertible (F33, F83) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 2014-2020BMW 4 Coupe (F32, F82) M4 CS 2017-2019BMW 4 Coupe (F32, F82) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 GTS 2016-2019

€2,320.00*
KW coilover springs | height-adjustable spring set | fits BMW X5M/X6M incl. Competition (F95/F96) | 253200ED
KW coilover springs The spring set with stepless lowering KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active. Setup - sporty and harmonious spring rates The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range. Stepless lowering Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles. Please note the conditions and instructions for this product: - Not for vehicles with level control / air suspension - VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers) Technical information: Lowering VA/HA (mm): 25-45/20-40 Adjustment VA/HA: thread/thread Approval: Parts certificate (§19.3) Scope of delivery: Set (VA+HA) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive BMW X5 (G05, F95) G5X 08/2018- M SUV Petrol 441 KW 4395 ccm 8 All-wheel drive BMW X5 (G05, F95) G5X 08/2018- M Competition SUV Petrol 460 KW 4395 ccm 8 All-wheel drive BMW X5 (G05, F95) G5X 08/2018- M Competition Mild Hybrid SUV Petrol/Electric 460 KW 4395 ccm 8 All-wheel drive BMW X6 (G06, F96) G6X 08/2019- M SUV Petrol 441 KW 4395 ccm 8 All-wheel drive BMW X6 (G06, F96) G6X 08/2019- M Competition SUV Petrol 460 KW 4395 ccm 8 All-wheel drive BMW X6 (G06, F96) G6X 08/2019- M Competition SUV gasoline/electric 460 KW 4395 ccm 8 all-wheel drive

€1,194.76*
Engine cover Carbon | fits VAG 2.0 EA888 Gen.4 Golf 8 GTI/CS/R, S3 (8Y), TTS (8S), Leon (KL), Formentor | Eventuri
Facts: Material: Carbon Manufacturer: Eventuri We are pleased to release our carbon engine cover for the VW Golf 8 platform.Compatible vehicles: VehicleTypePowerEngine capacityEngine type Audi A3 (8Y)S3 2.0 TFSI quattro228kW / 310hp1984cm³DNFB (from 09.20) Audi TT (8J1/8S)45 TFSI quattro180kW / 245hp1984cm³DNPA (from 10.20) Audi TT (8J1/8S)TTS 2.0 TFSI quattro235kW / 320hp1984cm³DNFD (from 11.20) Audi Q3 (F3)45 TFSI quattro180kW / 245hp1984cm³DNPA (from 01.21) Cupra Ateca (KH)2.0 TSI 4Drive221kW / 300hp1984cm³DNFC (from 07.20) Cupra Formentor (KM)2.0 TSI 4Drive140kW / 190hp1984cm³DNPA (from 03.21) Cupra Formentor (KM)2.0 TSI180kW / 245hp1984cm³DNPA (from 03.21) Cupra Formentor (KM)2.0 TSI 4Drive228kW / 310hp1984cm³DNFB (from 11.20) Cupra Leon (KL)2.0 TSI180kW / 245hp1984cm³DNPA (from 04.21) Cupra Leon (KL)2.0 TSI221kW / 300hp228kW / 310hp1984cm³DNFC (from 01.21)DNFB (from 06.21) Seat Tarraco (KN)2.0 TFSI 4Drive180kW / 245hp1984cm³DNPA (from 01.21) Skoda KodiaqRS 2.0 TSI 4x4180kW / 245hp1984cm³DNPA (from 06.21) Skoda Octavia IV (NX)RS 2.0 TFSI180kW / 245hp1984cm³DNPA (from 09.20) Skoda Superb III (3V)2.0 TSI 4x4206kW / 280hp1984cm³DNFE (from 11.20) VW Arteon2.0 TSI 4motionR 2.0 TSI 4motion206kW / 280hp235kW / 320hp1984cm³DNFE (from 11.20)DNFG (from 12.20) VW Golf 8GTI 2.0 TSI180kW / 245hp1984cm³DNPA (from 08.20) VW Golf 8GTI Clubsport/ED45 2.0 TSI221kW / 300hp1984cm³DNFC (from 10.20) VW Golf 8R 2.0 TSI 4motion235kW / 320hp1984cm³DNFG (from 12.20) VW Passat B8 (3G)2.0 TSI 4motion206kW / 280hp1984cm³DNFE (from 11.20) VW T-Roc (A1 Facelift)2.0 TSI 4motion221kW / 300hp1984cm³DNFC (from 11.21) VW Tiguan II (AD)2.0 TSI 4motion180kW / 245hp1984cm³DNPA (from 11.20) VW Tiguan II (AD)R 2.0 TSI 4motion235kW / 320hp1984cm³DNFG (from 11.20)

€731.85*