KW coilover springs | height-adjustable spring kit | fits Audi RS6/RS7 quattro C7/4G | 2531000K

€0.00*

Prices incl. VAT plus shipping costs

Delivery time: Availability on request at Aulitzky Tuning*

Optional: Installation on site at Aulitzky Tuning

- Ein- & Ausbau der Gewindefedern
- Achsvermessung
- Kalibrierung der Assistenzsysteme/Licht

Assembly at location DE-91564 Neuendettelsau

Reset choice

€0.00*

place a request

Finanzieren Sie ihren Einkauf über die Targobank.

Product number: KW2531000K

Product information "KW coilover springs | height-adjustable spring kit | fits Audi RS6/RS7 quattro C7/4G | 2531000K"

KW coilover springs

The spring set with stepless lowering
KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active.

Setup - sporty and harmonious spring rates
The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range.

Stepless lowering
Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles.

Please note the conditions and instructions for this product:
- Not for vehicles with level control / air suspension
- VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers)

Technical information:
Lowering VA/HA (mm): 5-30/15-40
Adjustment HA: Thread
Approval: Parts certificate (§19.3)
Scope of delivery: Set (VA+HA)

Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
AUDI A6 Avant (4G) 4G5, 4GD, C7 05/2011-09/2018 RS6 performance quattro Kombi Petrol 445 KW 3993 ccm 8 All-wheel drive
AUDI A6 Avant (4G) 4G5, 4GD, C7 05/2011-09/2018 RS6 quattro Estate Petrol 412 KW 3993 ccm 8 All-wheel drive
AUDI A7 Sportback (4G) 4GA, 4GF 07/2010-05/2018 RS7 performance quattro Hatchback Petrol 445 KW 3993 ccm 8 All-wheel drive
AUDI A7 Sportback (4G) 4GA, 4GF 07/2010-05/2018 RS7 quattro Hatchback Petrol 412 KW 3993 ccm 8 All-wheel drive

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

To continue, enter the characters shown above*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Zuletzt gesehene Produkte

Brake pads ME87 4-piston VA | fits BMW M2/M3/M4/x35i/x45i (F87/F80/F82/F83/F2x/F3x) | Endless

The Endless pads are an excellent brake pad for racing and everyday use. The MX87 is the further development of the MX72 and not only builds up friction with the disc faster, but is also more heat-resistant. Temperature range from 30-700CLow brake disc wearamazing longevity of the padReduction of heat cracksimproved response behaviourCoefficient of friction of 0.38-0.46 By far the greatest speciality, however, is the balancing act between suitability for everyday use and use on trackdays:This means that this rubber is suitable in every situation, whether on long trackdays, or in everyday use.However, if the vehicle is mainly used on the track, we recommend the N39S. For the front axle. Compatible vehicles:BMW 4-piston BMW (Performance) brake caliper, blue caliper on F-series vehicles, such as. M135i M140i F20 F21, M235i M240i F22 F23, 335i 340i F30 F31 F34, 435i 440i F32 F33 F36, M2 F87, M3 F80,M4 F82 F83Alpina models such as the B3Motorsport articles - without STVZO approval.

€399.00*

Mirror covers Carbon | fits BMW M5/M8 incl. Competition/CS (F90/F91/F92/F93) S63 | Aulitzky Tuning

The exterior mirror covers in glossy pre-preg carbon fibre give your standard mirror units a more aggressive and premium look.Quick and easy to fit, they are a styling option with perfect value for money to enhance the road presence of your vehicle. Unlike normal carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Guaranteed fit- registration free Scope of delivery:- 1x pair of mirror caps Compatible vehicles:BMW F90 M5 SaloonBMW F91 M8 ConvertibleBMW F92 M8 CoupeBMW F93 M8 Gran Coupé Note: This is NOT an original BMW product!

€419.00*

Aulitzky Exhaust | Downpipe 3" (76mm) | fits BMW M5/M8 (F90/F91/F92/F93) S63 | Motorsport articles

Facts: - Catless - with thermal insulation - aggressive sound - no excessive noise under normal driving conditions - without approval in the area of the StVZO Compatible vehicles:VehicleVehicle typePowerCapacityEngine typeYear of construction BMW 5 Series (F90)M5 441kW / 600hp4395cm³S63 B44 B09.17 - 11.20 BMW 8 Series (F91/F92/F93)M8 441kW / 600hp4395cm³S63 B44 B09.17 - 11.20 Attention: Not for models manufactured after 11/2020! Note: Depending on the software version, the engine control light may light up. We recommend adapting the software in this case.*ATTENTION: Cat replacement pipes marked “without approval” are not permitted for use on public roads and are intended for racing purposes only! If you nevertheless install a product without approval in your vehicle and use it within the scope of the StVZO, you are liable to prosecution. Possible consequences that you can expect in this case: Expiry of the operating license according to §19 of the StVZO and a possible resulting immobilization of the vehicle. Other possible consequences, such as a charge of tax evasion, as well as possible investigations by the environmental authorities are at the discretion of the investigators.

€1,599.00*

Canards Performance Carbon | fits BMW M3/M4 (G80/G81/G82/G83) S58 | Aulitzky Tuning

The high-quality carbon fibre front canards are a perfect addition to significantly enhance the style of your vehicle. Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- With parts certificate according to §19.3 Scope of delivery:- 1x set carbon front canards Compatible vehicles: BMW G80 M3 Limousine (2021+) BMW G80 M3 Competition Limousine (2021+) BMW G81 M3 Touring (2023+) BMW G81 M3 Competition Touring (2023+) BMW G82 M4 Coupe (2021+) BMW G82 M4 Competition Coupé (2021+) BMW G83 M4 Cabrio (2021+) BMW G83 M4 Competition Cabrio (2021+) Note: This is NOT an original BMW product!

€499.00*

Tip

Aulitzky Exhaust | ECE downpipe 2,76” (70mm) with sports catalyst | fits Mini Cooper S/JCW/GP (F54/F55/F56/F57/F60)

Facts: - replaces the main catalyst - with 200 cell stainless steel sports catalyst - Euro 6 compatible - with ECE approval* Compatible vehicles:VehicleVehicle typePowerEngine capacityEngineYear of construction Mini Clubman (F54)Cooper S / ALL4120kW / 163hp131kW / 178hp141kW / 192hp1998cm³B48 A20 A, B48 A20 FB46 A20 A, B48 A20 FB48 A20 A, B46 A20 A, B48 A20 F11.14 -11.20 - 11.14 - Mini Clubman (F54)Cooper S JCW / ALL4155kW / 211hp1998cm³B48 A20 A, B46 A20 A, B48 A20 F11.14 - 06.18 Mini Clubman (F54)JCW / ALL4170kW / 231hp225kW / 306hp1998cm³B48 A20 BB48 A20 E11.16 - 06.1907.19 - Mini (F55)Cooper S120kW / 163hp131kW / 178hp141kW / 192hp1998cm³B48 A20 AB46 A20 A, B48 A20 FB48 A20 A, B46 A20 A09.13 -11.20 - 09.13 - Mini (F55)Cooper S JCW155kW / 211hp1998cm³B48 A20 A, B46 A20 A09.13 - Mini (F56)Cooper S120kW / 163hp131kW / 178hp141kW / 192hp1998cm³B48 A20 AB46 A20 A, B48 A20 FB48 A20 A, B46 A20 A, B48 A20 F11.14 -11.20 - 12.13 - Mini (F56)Cooper S JCW155kW / 211hp1998cm³B48 A20 A, B46 A20 A12.13 - Mini (F56)JCW170kW / 231hp1998cm³B48 A20 B, B46 A20 B03.15 - Mini (F56)JCW GP ALL4225kW / 306hp1998cm³B48 A20 E03.20 - Mini Convertible (F57)Cooper S120kW / 163hp131kW / 178hp141kW / 192hp1998cm³B48 A20 A, B46 A20 AB48 A20 A, B48 A20 FB48 A20 A, B46 A20 A, B48 A20 F11.14 -11.20 - 11.14 - Mini Convertible (F57)Cooper S JCW155kW / 211hp1998cm³B48 A20 A, B46 A20 A11.14 - Mini Convertible (F57)JCW170kW / 231hp1998cm³B48 A20 B, B46 A20 B05.15 - Mini Countryman (F60)Cooper S / ALL4120kW / 163hp131kW / 178hp141kW / 192hp1998cm³B48 A20 AB46 A20 A, B48 A20 FB48 A20 A, B46 A20 A09.13 -11.20 - 09.13 - Mini Countryman (F60)JCW ALL4170kW / 231hp225kW / 306hp1998cm³B48 A20 BB48 A20 E03.17 - 06.1907.19 - Note: Depending on the software version, the engine control light may come on. We recommend the purchase of an OFF set module or software customisation. *This downpipe has ECE approval so that it can be used within the scope of the StVZO without registration in the vehicle documents.

From €2,099.00*

Details

KW coilover springs | height-adjustable spring kit | fits Audi RS6/RS7 quattro C7/4G | 2531000K

Ratenrechner

Ask a question

Previously asked questions