Intake system Carbon | fits Honda Civic Gen.9 Type-R (FK2) 310hp | Eventuri

Facts: +30 hp on the Dyno Stage 3 Civic FK2 Type-R Brand: Eventuri Material: Carbon fibre Installation: like original part (exchange) Expertise: without By now it is clear that Eventuri is not your next run-of-the-mill company, but has a special goal with extraordinary products. The design of the new turbo tubes for the Civic FK2 and FK8 makes this clear once again. Small part, big effect: +30 hp on the Dyno Stage 3 Civic FK8 Type-R Naturally full carbon fibre Perfect fit Both the Eventuri Honda Civic FK2 Type-R Intake and the FK8 Type-R Intake were available in 2 versions. In both cases, the turbo pipe ONLY fits the new variants (V2) of the intakes. This means that for all customers with old (V1) intakes, the LMM pipe upgrade must first be purchased. Eventuri offers two variants for both pipes (FK2 and FK8): For V1 and V2 customers respectively. Eventuri Turbo Tube for Honda Civic FK2 Type-R The turbo tube for the FK8 is available in 2 variants and only fits the Eventuri Intake. Variant 1: Customers with the old V1 Intake (old carbon LMM tube) Scope of delivery: - Carbon Turbo Tube - CNC turbo flanges - FK2 specific silicone tube - FK2 V2 carbon LMM tube Variant 2: Customers with the new V2 Intake (with new carbon LMM tube) Scope of delivery: - Carbon Turbo Tube - CNC turbo flanges - FK2 specific silicone tubeCompatible vehicles: VehicleTypepowerengine capacityEngineYear of construction Honda Civic (FK2)Type-R228kW / 310PS1996ccK20C108.15 - 12.16

The Eventuri Carbon Side Panel for Honda Civic FK2 Type R is made entirely of carbon fiber and is sure to attract envious glances when you look under the hood.Especially in combination with the intake system and the engine cover, the side panel makes the engine compartment of the Civic shine in new splendor.The engine cover is not included in the scope of delivery, but can be ordered separately. Expert opinion: Material certificate Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Honda Civic (FK2)Type-R228kW / 310hp1996cm³K20C108.15 - 12.16

Material: Carbon Manufacturer: Eventuri Expertise: Parts certificate The long awaited upgrade for the Eventuri carbon intake system for the Honda Civic FK2 Type-R! The new addition to the Eventuri portfolio is a 1 to 1 replacement of the OEM LMM pipe with a perfectly crafted full carbon fibre LMM pipe. The improved flow characteristics and the optimised shielding from engine heat thanks to the Prepeg carbon make this small upgrade an improvement, and not just visually. In road tests, 12 hp more power was measured over and above the additional power already delivered by the Eventuri Intake! Compatible vehicles: VehicleTypePower outputDisplacementEngineYear of construction Honda Civic (FK2)Type-R228kW / 310PS1996ccK20C108.15 - 12.16

The Eventuri carbon engine cover for Honda Civic FK2 Type R, especially in conjunction with the intake system, ensures envious glances when opening the hood.The engine cover is made entirely of carbon fiber and can also be produced in different colored Kevlar structures (red, blue, yellow) on request.The side panel is not included with this engine cover, but can be ordered separately. Expert opinion: Material certificate Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeYear of construction Honda Civic (FK2)Type-R228kW / 310hp1996cm³K20C108.15 - 12.16

Facts: +30 hp on the Dyno Stage 3 Civic FK2 Type-R Brand: Eventuri Material: Carbon fibre Installation: like original part (exchange) Expertise: without By now it is clear that Eventuri is not your next run-of-the-mill company, but has a special goal with extraordinary products. The design of the new turbo tubes for the Civic FK2 and FK8 makes this clear once again. Small part, big effect: +30 hp on the Dyno Stage 3 Civic FK8 Type-R Naturally full carbon fibre Perfect fit Both the Eventuri Honda Civic FK2 Type-R Intake and the FK8 Type-R Intake were available in 2 versions. In both cases, the turbo pipe ONLY fits the new variants (V2) of the intakes. This means that for all customers with old (V1) intakes, the LMM pipe upgrade must first be purchased. Eventuri offers two variants for both pipes (FK2 and FK8): For V1 and V2 customers respectively. Eventuri Turbo Tube for Honda Civic FK2 Type-R The turbo tube for the FK8 is available in 2 variants and only fits the Eventuri Intake. Variant 1: Customers with the old V1 Intake (old carbon LMM tube) Scope of delivery: - Carbon Turbo Tube - CNC turbo flanges - FK2 specific silicone tube - FK2 V2 carbon LMM tube Variant 2: Customers with the new V2 Intake (with new carbon LMM tube) Scope of delivery: - Carbon Turbo Tube - CNC turbo flanges - FK2 specific silicone tubeCompatible vehicles: VehicleTypepowerengine capacityEngineYear of construction Honda Civic (FK2)Type-R228kW / 310PS1996ccK20C108.15 - 12.16

Still looking for the right gift? How about a gift voucher? You can never go wrong with that :) Make someone happy and give them a gift voucher from Aulitzky Tuning worth €300. Please note: - The value of the voucher cannot be redeemed for cash. - Redeemable on our entire product range. - The voucher will be sent in paper form and can then be redeemed on site. - If required, it is possible to convert this voucher into a discount code for the online shop. Please simply contact us for this.

Still looking for the right gift? How about a gift voucher? You can never go wrong with that :) Make someone happy and give them a gift voucher from Aulitzky Tuning worth €500. Please note: - The value of the voucher cannot be redeemed for cash. - Redeemable on our entire product range. - The voucher will be sent in paper form and can then be redeemed on site. - If required, it is possible to convert this voucher into a discount code for the online shop. Please simply contact us for this.

KW V1 coilover suspension Sportiness paired with outstanding looks. With factory pre-configured damping.Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car. Stepless loweringThe KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or, in the case of non-wheel-guiding double-wishbone rear axles, on the rear axle height adjustment. The benchmark for sporty, dynamic tuning fansWith its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to enhance your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasureAs a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, the warranty is up to five years. - Optimally adjusted in advance- sporty and harmonious damping technology- Stainless steel technology "inox-line"- Individually height-adjustable- Tested adjustment range- Ready-to-install complete solution- High-quality components for a long service life- Complete documentation for easy handling Setup - factory pre-configured damping setupThe KW V1 has a vehicle-specific, permanently configured damper setup. The spring and damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving. Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. It is interesting to note that the KW V1 is particularly popular with tuning enthusiasts who prioritise the idea of show & shine. Please note the conditions and instructions for this product: - VA + HA height adjustable (coilover struts) - When used with standard wheel/tire combinations, additional commercially available track wideners from the accessories may be required - Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible. - For camber correction on the rear axle, we recommend the use of the adjustable KW control arm. Vehicle-specific KW control arms can be found in the accessories table. Technical information: Product line: Street Performance Lowering VA/HA (mm): 30-55/30-55 Design: V1 Hardness adjustment: none Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 Cooper Hatchback Petrol 85 KW 1598 ccm 4 Front Wheel Drive MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 Cooper Hatchback Petrol 88 KW 1598 ccm 4 Front Wheel Drive MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 Cooper Hatchback Petrol 90 KW 1598 ccm 4 Front Wheel Drive MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 One Hatchback Petrol 55 KW 1397 ccm 4 front-wheel drive MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 One Hatchback Petrol 55 KW 1598 ccm 4 front-wheel drive MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 One Hatchback Petrol 70 KW 1397 ccm 4 front-wheel drive MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 One Hatchback Petrol 72 KW 1598 ccm 4 front-wheel drive

The Eventuri FK8 and FK2 engine cover is made of black carbon and red Kevlar and fits directly on the FK8 and also on the FK2 Type-R. Expert opinion: Material certificate Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Honda Civic (FK2)Type-R228kW / 310hp1996cm³K20C108.15 - 12.16 Honda Civic (FK8)Type-R235kW / 320hp1996cm³K20C106.17 - 12.22