The Eventuri Carbon Side Panel for Honda Civic FK2 Type R is made entirely of carbon fiber and is sure to attract envious glances when you look under the hood. Especially in combination with the intake system and the engine cover, the side panel makes the engine compartment of the Civic shine in new splendor. The engine cover is not included in the scope of delivery, but can be ordered separately.
Facts:Brand: EventuriMaterial: CarbonInstallation: like original part (exchange)Parts certificate: For this product a certificate is available for certain regions and vehicles (details below)
The intake system for the Honda Civic Type-R FK8 was a new kind of challenge for the aircraft engineers at Eventuri, requiring a lot of ingenuity and technical know-how. The problem was the position of the OEM airbox, which sits directly in front of the radiator fan in the FK8. This arrangement poses a challenge for Eventuri's open filter system - how do you ensure that the intake system does not draw hot air out of the engine compartment?The solution is a completely new type of carbon scoop that draws the fresh airflow from the direction of the fenders. The opening, which is twice as large as the original airbox, is no longer in the airflow of the radiator fan and thus ensures cool and even ventilation.
The well-known effect of the Eventuri intake systems then also takes effect in the Honda Civic Type-R FK8:The airflow is accelerated via the cone inside the filter housing. The bundled and directed air then reaches the turbo at lower temperatures and more evenly due to less friction in the air supply. This not only significantly improves responsiveness, but also increases performance.
The Eventuri Honda Civic Type-R FK8 intake comes with the following parts:- Patented Eventuri filter- Full carbon prepreg airbox- Full carbon intake manifold- Secondary intake scoop- Carbon cover
Parts certificateThe manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle.
A certificate is available for this product for the following regions and vehicles:* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24Country Model Type approval*DE/AT Honda Civic 5DR FC e11*2007/46*3633*..DE/AT Honda Civic 5DR FK e6*2007/46*0256*..CH/LI Civic 2.0i TypeR 1HA511CH/LI Civic 2.0i TypeR 1HA564CH/LI Civic 2.0i TypeR 1HA580CH/LI Honda Civic 1HA493
Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Honda Civic (FK8)Type-R235kW / 320hp1996cm³K20C106.17 - 12.22
Facts:Power increase: 24-30 hp, 28-35 ft-lbBrand: EventuriMaterial: CarbonParts certificate: A certificate is available for this product for certain regions and vehicles (details below)
The FK2 Type R V2 intake is an updated version of our original FK2 system that now replaces the stock rubber intake tube with our carbon tube and a custom silicone hose. The new carbon tube also includes the MAF sensor and therefore also replaces our original MAF metal tube from the original Eventuri system. The addition of the carbon tube smooths the path from the venturi filter housing to the stock turbo inlet tube and the difference is significant in terms of additional power gained. The rest of the intake remains the same, with our cold air scoop and venturi filter housing ensuring smooth airflow and low intake temperatures. By incorporating an effective cold air intake, which the stock system lacks, and coupling it with our patented venturi housing and carbon intake tube, our intake delivers industry-leading results consistently.
The Eventuri differenceThe FK2 Type R V2 Eventuri system uses our patented carbon fiber housing with our custom Gen 2 filter that provides an aerodynamically efficient airflow path from the filter to the turbos. Not just another cone filter with a heat shield, but a unique design that creates the Venturi effect and maintains laminar flow conditions to reduce drag on the turbo.
Each component has been designed for a specific purpose and to a very high standard.
Each Eventuri FK2 V2 kit consists of:Patented carbon fiber intake housingAnodized aluminum intake coverTailor-made generation 2 high-flow filterCarbon intake tube with integrated MAF sensor holderCustomized silicone hose with vent outletsCarbon cold air duct with water drainOEM windshield pre-cut for the ductMounting bracket made from laser-cut stainless steelHigh-quality silicone coupling with hose clamps according to OEM specification
Parts certificateThe manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle.
A certificate is available for this product for the following regions and vehicles:* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24Country Model Type approval*DE/AT Honda Civic e11*xx/xx*0256*..
Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Honda Civic (FK2)Type-R228kW / 310hp1996cm³K20C108.15 - 12.16
Material: Carbon
Manufacturer: Eventuri
Expertise: Parts certificate
The long awaited upgrade for the Eventuri carbon intake system for the Honda Civic FK2 Type-R!
The new addition to the Eventuri portfolio is a 1 to 1 replacement of the OEM LMM pipe with a perfectly crafted full carbon fibre LMM pipe. The improved flow characteristics and the optimised shielding from engine heat thanks to the Prepeg carbon make this small upgrade an improvement, and not just visually.
In road tests, 12 hp more power was measured over and above the additional power already delivered by the Eventuri Intake!
Compatible vehicles:
VehicleTypePower outputDisplacementEngineYear of construction
Honda Civic (FK2)Type-R228kW / 310PS1996ccK20C108.15 - 12.16
The Eventuri carbon engine cover for Honda Civic FK2 Type R, especially in conjunction with the intake system, ensures envious glances when opening the hood.The engine cover is made entirely of carbon fiber and can also be produced in different colored Kevlar structures (red, blue, yellow) on request.The side panel is not included with this engine cover, but can be ordered separately.
Expert opinion: Material certificate
Compatible vehicles:
VehicleVehicle typePowerEngine capacityEngine typeYear of construction
Honda Civic (FK2)Type-R228kW / 310hp1996cm³K20C108.15 - 12.16
Facts:
+30 hp on the Dyno Stage 3 Civic FK2 Type-R
Brand: Eventuri
Material: Carbon fibre
Installation: like original part (exchange)
Expertise: without
By now it is clear that Eventuri is not your next run-of-the-mill company, but has a special goal with extraordinary products. The design of the new turbo tubes for the Civic FK2 and FK8 makes this clear once again.
Small part, big effect:
+30 hp on the Dyno Stage 3 Civic FK8 Type-R
Naturally full carbon fibre
Perfect fit
Both the Eventuri Honda Civic FK2 Type-R Intake and the FK8 Type-R Intake were available in 2 versions. In both cases, the turbo pipe ONLY fits the new variants (V2) of the intakes. This means that for all customers with old (V1) intakes, the LMM pipe upgrade must first be purchased.
Eventuri offers two variants for both pipes (FK2 and FK8): For V1 and V2 customers respectively.
Eventuri Turbo Tube for Honda Civic FK2 Type-R
The turbo tube for the FK8 is available in 2 variants and only fits the Eventuri Intake.
Variant 1: Customers with the old V1 Intake (old carbon LMM tube)
Scope of delivery:
- Carbon Turbo Tube
- CNC turbo flanges
- FK2 specific silicone tube
- FK2 V2 carbon LMM tube
Variant 2: Customers with the new V2 Intake (with new carbon LMM tube)
Scope of delivery:
- Carbon Turbo Tube
- CNC turbo flanges
- FK2 specific silicone tubeCompatible vehicles:
VehicleTypepowerengine capacityEngineYear of construction
Honda Civic (FK2)Type-R228kW / 310PS1996ccK20C108.15 - 12.16
Material: Carbon
Manufacturer: Eventuri
Expertise: Parts certificate
The long awaited upgrade for the Eventuri carbon intake system for the Honda Civic FK2 Type-R!
The new addition to the Eventuri portfolio is a 1 to 1 replacement of the OEM LMM pipe with a perfectly crafted full carbon fibre LMM pipe. The improved flow characteristics and the optimised shielding from engine heat thanks to the Prepeg carbon make this small upgrade an improvement, and not just visually.
In road tests, 12 hp more power was measured over and above the additional power already delivered by the Eventuri Intake!
Compatible vehicles:
VehicleTypePower outputDisplacementEngineYear of construction
Honda Civic (FK2)Type-R228kW / 310PS1996ccK20C108.15 - 12.16
The 3DDesign carbon front lip for the F87 provides an even more aggressive look at the front of the vehicle in no time at all. The lip is made of carbon fibre/GRP and is not just visually impressive: it also increases the downforce on the front axle.Compatible vehicles:BMW 2 Coupe (F22, F87) M2 2015-2018
The Vorsteiner VRS Aero carbon front spoiler provides significantly more downforce on the front axle and ensures a racy feeling on the road. This Vorsteiner front spoiler for the Audi R8 is made of high-quality prepreg carbon and features high-quality processing of the materials in the autoclave as well as an exact fit. The front spoiler for the Audi R8 is plug & play.
Certificate: Material certificate
Compatible vehicles:AUDI R8 (4S3, 4SP) 5.2 FSI Since 2017AUDI R8 (4S3, 4SP) 5.2 FSI quattro Since 2015AUDI R8 Spyder (4S9, 4SR) 5.2 FSI Since 2017AUDI R8 Spyder (4S9, 4SR) 5.2 FSI quattro 2016-
The Wagner Tuning Performance intercooler kit is suitable for the following models:Mercedes C190 AMG GT 340-390KW/462-530hp (2015-2020)Mercedes C190 AMG GT S 340-390KW/462-530hp (2015-2020)Mercedes C190 AMG GT C 410KW/557hp (2017+)Mercedes C190 AMG GT R 430KW/585hp (2017+)
Boost the performance of your Mercedes-AMG to a new level with our groundbreaking Wagner Tuning high performance intercooler!
The 4.0 liter V8 BiTurbo engine (M178 DE 40 AL) of your AMG model is equipped with an indirect charge air cooling circuit, which is replaced by our innovative intercooler.
Our high-performance intercooler features an innovative performance mesh measuring 209 mm x 175 mm x 110 mm, which has been specially developed to meet the demanding requirements of your AMG engine. With an impressive 86% larger outer mesh volume compared to the original radiator, the optimal ratio between inner and outer cooling surface allows for maximum heat transfer and optimal internal airflow. The cast aluminium end boxes have been optimized using the latest CAD technology and CFD simulations to ensure outstanding cooling performance with minimal back pressure. This kit is therefore also ideally suited for racing and ensures optimum cooling of the supercharged air with a significant increase in performance!
To ensure that your vehicle is always optimally cooled, our Wagner Tuning intercooler is equipped with a thermally conductive anti-corrosion coating, which guarantees a long-lasting and effective cooling effect. Installation of the system is straightforward thanks to our detailed installation instructions and can be carried out in plug & play style.
Advantages:- Significantly improved cooling performance for your engine- Reduced back pressure for optimum performance- More power and torque for a more intense driving experience- Mechanical relief of the turbocharger for a longer service life- 100% pressure resistance for maximum reliability- Simple plug & play installation without complex modifications- Up to 4-year warranty for a worry-free driving experience
Give your Mercedes-AMG the performance it deserves with our high-quality Wagner Tuning high-performance intercooler. Order today and experience the power!
Mesh dimensions OEM intercooler:177 mm x 153 mm x 80 mmV = 2.16 liters
Mesh dimensions Wagner Tuning intercooler:209 mm x 175 mm x 110 mmV = 4.02 liters (+86%)
Scope of delivery:2 intercoolers4 silicone air hoses1 mounting materialAttention: Not approved in the area of the StVZO.
€3,440.00*
This website uses cookies to ensure the best experience possible. More information...