KW V2 coilover suspension inox | fits Mini Cooper/One (R56) | 15220050

€0.00*

Delivery time: Availability on request at Aulitzky Tuning*

Optional: Installation on site at Aulitzky Tuning

- Installation and removal of coilover suspension
- Wheel camber correction kit
- Wheel alignment
- Calibration of assistance systems/lights
- Individual suspension tuning according to customer requirements
- Individual test drive and adjustment together with the customer

Assembly at location DE-91564 Neuendettelsau

Reset choice

€0.00*

place a request

Finanzieren Sie ihren Einkauf über die Targobank.

Product number: KW15220050

Product information "KW V2 coilover suspension inox | fits Mini Cooper/One (R56) | 15220050"

KW V2 coilover suspension

For more stability or driving comfort. With adjustable rebound damping.
Sporty drivers who want more than just an outstanding look thanks to stepless lowering in the tested adjustment range will find the ideal suspension solution in the KW V2 coilover suspension in the typical KW "inox-line". In addition to the high-quality workmanship, the use of rust-free stainless steel struts, corrosion-resistant components and the convincing durability, the KW V2 convinces with the possibility of additionally adapting the damper setup to your own requirements with the rebound stage adjustable in 16 clicks.

More comfort or more sport - you decide
As with all KW coilover suspensions, the KW engineers develop the vehicle-specific KW damper tuning, which is appreciated by car enthusiasts worldwide, in extensive test cycles on the Nürburgring Nordschleife and in our test centre on the KW 7-post driving dynamics test bench. With a KW coilover suspension you will experience your car more directly and dynamically. With the KW V2, as an experienced sports driver, you can influence the handling and comfort yourself with the individually adjustable rebound damping. The 16 precise clicks allow you to tune the KW dampers to be firmer or more comfortable without affecting the bottom valve of the compression stage.

Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery. By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car will track more accurately and you will have even more stability at higher cornering speeds. If, for example, you change the approved wheel/tyre combinations of your car manufacturer for larger rims, you can use the KW V2 with adjustable rebound to perfectly match the handling of your car and your new alloy wheels.

KW quality - your satisfaction is our incentive
During production at our headquarters in Fichtenberg, the KW Variant 2 "inox-line" coilover suspension kits are subjected to extensive tests during the production process in order to fulfil our quality standards. Every single damper and every suspension is extensively tested. As a German manufacturer, it is a matter of course for us to provide a warranty of up to 5 years on our coilover suspension kits, which exceed the requirements of the original equipment industry, and on our suspension programme comprising over 4,600 applications when installed by one of our KW specialist dealers.

Finally, KW coilover suspension struts are 100 per cent rust-free under all weather conditions and have an unlimited service life. The function of the stepless lowering via the dirt-resistant trapezoidal thread and the polyamide threaded ring on the KW V2 is also designed for many years of use. In a salt spray test, no oxidation occurred on the KW coilover struts. This means that the adjustment of the stepless lowering is not affected even after years of use.

- Damping technology adjustable in the rebound stage in 16 exact clicks
- Stainless steel technology inox-line
- Individual, stepless lowering
- Tested adjustment range
- Ready-to-install complete solution
- high-quality components for a long service life
- Complete documentation for easy application

Setup - Adjustable rebound damping with 16 clicks.
With the KW V2, you can further adjust the vehicle-specific KW damper tuning, which is appreciated by car enthusiasts worldwide, with 16 clicks. The rebound adjustment allows you to take into account the changes in driving dynamics that result from changing the complete set of wheels or fitting winter tyres. The damper characteristic curve of the weather-resistant KW V2 coilover suspension can be adjusted to be firmer or more comfortable, depending on your own requirements. The suspension is suitable for all sporty drivers who want more than just stepless lowering for their driving pleasure.

Please note the conditions and instructions for this product:
- VA + HA height adjustable (coilover struts)
- When used with standard wheel/tire combinations, additional commercially available track wideners from the accessories may be required
- Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible.
- For camber correction on the rear axle, we recommend the use of the adjustable KW control arm. Vehicle-specific KW control arms can be found in the accessories table.

Technical information:
Product line: Street Performance
Lowering VA/HA (mm): 30-55/30-55
Design: V2
Hardness adjustment: Rebound
Material: Stainless steel
Adjustment VA/HA: Thread/thread
Approval: Parts certificate (§19.3)

Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 Cooper Hatchback Petrol 85 KW 1598 ccm 4 Front Wheel Drive
MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 Cooper Hatchback Petrol 88 KW 1598 ccm 4 Front Wheel Drive
MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 Cooper Hatchback Petrol 90 KW 1598 ccm 4 Front Wheel Drive
MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 One Hatchback Petrol 55 KW 1397 ccm 4 front-wheel drive
MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 One Hatchback Petrol 55 KW 1598 ccm 4 front-wheel drive
MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 One Hatchback Petrol 70 KW 1397 ccm 4 front-wheel drive
MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 One Hatchback Petrol 72 KW 1598 ccm 4 front-wheel drive

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

To continue, enter the characters shown above*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Zuletzt gesehene Produkte

Gift voucher 300€

Still looking for the right gift? How about a gift voucher? You can never go wrong with that :) Make someone happy and give them a gift voucher from Aulitzky Tuning worth €300. Please note: - The value of the voucher cannot be redeemed for cash. - Redeemable on our entire product range. - The voucher will be sent in paper form and can then be redeemed on site. - If required, it is possible to convert this voucher into a discount code for the online shop. Please simply contact us for this.

€300.00*

Gift voucher 500€

Still looking for the right gift? How about a gift voucher? You can never go wrong with that :) Make someone happy and give them a gift voucher from Aulitzky Tuning worth €500. Please note: - The value of the voucher cannot be redeemed for cash. - Redeemable on our entire product range. - The voucher will be sent in paper form and can then be redeemed on site. - If required, it is possible to convert this voucher into a discount code for the online shop. Please simply contact us for this.

€500.00*

KW V1 coilover suspension inox | fits Mini Cooper/One (R56) | 10220050

KW V1 coilover suspension Sportiness paired with outstanding looks. With factory pre-configured damping.Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car. Stepless loweringThe KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or, in the case of non-wheel-guiding double-wishbone rear axles, on the rear axle height adjustment. The benchmark for sporty, dynamic tuning fansWith its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to enhance your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasureAs a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, the warranty is up to five years. - Optimally adjusted in advance- sporty and harmonious damping technology- Stainless steel technology "inox-line"- Individually height-adjustable- Tested adjustment range- Ready-to-install complete solution- High-quality components for a long service life- Complete documentation for easy handling Setup - factory pre-configured damping setupThe KW V1 has a vehicle-specific, permanently configured damper setup. The spring and damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving. Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. It is interesting to note that the KW V1 is particularly popular with tuning enthusiasts who prioritise the idea of show & shine. Please note the conditions and instructions for this product: - VA + HA height adjustable (coilover struts) - When used with standard wheel/tire combinations, additional commercially available track wideners from the accessories may be required - Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible. - For camber correction on the rear axle, we recommend the use of the adjustable KW control arm. Vehicle-specific KW control arms can be found in the accessories table. Technical information: Product line: Street Performance Lowering VA/HA (mm): 30-55/30-55 Design: V1 Hardness adjustment: none Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 Cooper Hatchback Petrol 85 KW 1598 ccm 4 Front Wheel Drive MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 Cooper Hatchback Petrol 88 KW 1598 ccm 4 Front Wheel Drive MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 Cooper Hatchback Petrol 90 KW 1598 ccm 4 Front Wheel Drive MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 One Hatchback Petrol 55 KW 1397 ccm 4 front-wheel drive MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 One Hatchback Petrol 55 KW 1598 ccm 4 front-wheel drive MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 One Hatchback Petrol 70 KW 1397 ccm 4 front-wheel drive MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 One Hatchback Petrol 72 KW 1598 ccm 4 front-wheel drive

€1,420.86*

Intake system Carbon | fits Honda Civic Gen.9 Type-R (FK2) 310hp | Eventuri

Facts:Power increase: 24-30 hp, 28-35 ft-lbBrand: EventuriMaterial: CarbonParts certificate: A certificate is available for this product for certain regions and vehicles (details below) The FK2 Type R V2 intake is an updated version of our original FK2 system that now replaces the stock rubber intake tube with our carbon tube and a custom silicone hose. The new carbon tube also includes the MAF sensor and therefore also replaces our original MAF metal tube from the original Eventuri system. The addition of the carbon tube smooths the path from the venturi filter housing to the stock turbo inlet tube and the difference is significant in terms of additional power gained. The rest of the intake remains the same, with our cold air scoop and venturi filter housing ensuring smooth airflow and low intake temperatures. By incorporating an effective cold air intake, which the stock system lacks, and coupling it with our patented venturi housing and carbon intake tube, our intake delivers industry-leading results consistently. The Eventuri differenceThe FK2 Type R V2 Eventuri system uses our patented carbon fiber housing with our custom Gen 2 filter that provides an aerodynamically efficient airflow path from the filter to the turbos. Not just another cone filter with a heat shield, but a unique design that creates the Venturi effect and maintains laminar flow conditions to reduce drag on the turbo. Each component has been designed for a specific purpose and to a very high standard. Each Eventuri FK2 V2 kit consists of:Patented carbon fiber intake housingAnodized aluminum intake coverTailor-made generation 2 high-flow filterCarbon intake tube with integrated MAF sensor holderCustomized silicone hose with vent outletsCarbon cold air duct with water drainOEM windshield pre-cut for the ductMounting bracket made from laser-cut stainless steelHigh-quality silicone coupling with hose clamps according to OEM specification Parts certificateThe manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles:* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24Country Model Type approval*DE/AT Honda Civic e11*xx/xx*0256*.. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Honda Civic (FK2)Type-R228kW / 310hp1996cm³K20C108.15 - 12.16

€1,487.00*

Engine cover Carbon | fits Honda Civic Gen.9 Type-R (FK2) 310hp, Gen.10 Type-R (FK8) 320hp | Eventuri

The Eventuri FK8 and FK2 engine cover is made of black carbon and red Kevlar and fits directly on the FK8 and also on the FK2 Type-R. Expert opinion: Material certificate Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Honda Civic (FK2)Type-R228kW / 310hp1996cm³K20C108.15 - 12.16 Honda Civic (FK8)Type-R235kW / 320hp1996cm³K20C106.17 - 12.22

€615.00*

KW V2 coilover suspension inox | fits Mini Cooper/One (R56) | 15220050

Ratenrechner

Ask a question

Previously asked questions