Front lip Carbon | fits BMW M2 Competition (F87) N55 | 3DDesign

Actuator for exhaust flap OEM part number: 18307851568 (18 30 7 851 568) Suitable for the following BMW models with exhaust flap: F80 F82 F83 F85 F86 F87N F90 F91 F92 F93 F95 F96 F97 F98 G01 G02 G05 G06 G14 G15 G16 G20 G21 G22 G23 G26 G30 G42 G82 G83

Experience the fascinating world of carbon air intakes customised for the F87. These have been developed to give your vehicle a unique appearance.Unlike normal carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee - with parts certificate according to §19.3 Scope of delivery:- 1x SOOQOO air intakes Compatible vehicles:BMW M2 (F87)BMW M2 Competition (F87) Note: This is NOT an original BMW product!

Facts: - 2x 3.15" (80mm)/ 2.56" (65mm), replaces the main catalytic converter - with 200 cell stainless steel sports catalytic converter - Euro 6 compatible - with Thermo-Integral insulation - with ECE approval* Compatible vehicles:VehicleVehicle typePower outputEngine capacityEngineYear of construction BMW 2 Series (F87)M2 Competition302kW / 411PS2979cm³S55 B30 A06.18-06.21 BMW 2 Series (F87)M2 CS331kW / 450PS2979ccS55 B30 A11.19-06.21 Note: Depending on the software version, the engine control light may light up. We recommend a software adjustment in this case. *This downpipe has ECE approval so that it can be used within the scope of the German Road Traffic Licensing Regulations (StVZO) without registration in the vehicle documents.

Facts: - Tailpipes: 4x101mm black matt - stainless steel 3 inch (76mm) - Electric flaps - Exhaust flaps with ceramic bearings - Made in Germany (Lake Constance) - with ECE approval * Scope of delivery: - 1x Aulitzky Exhaust exhaust system from OPF - 4x tailpipes 101mm black matt - ECE handoutCompatible vehicles:VehicleTypePowercubic capacityEngineYear of constructionBMW 2 Series Coupe (F87)M2 Competition302kW / 411hp2979cm³S55 B30 A06.18 - 06.21BMW 2 Series Coupe (F87)M2 CS331kW / 450hp2979cm³S55 B30 A11.19 - 06.21 *The combination certificate is available (includes Intakte, intercooler, boost / charge pipe kit, downpipe, exhaust system, 560hp Aulitzky App performance increase and 95dB increase in stationary noise).In conjunction with the standard or ECE flap control system (with type approval), this flap exhaust system has ECE approval so that it can be used legally within the scope of the StVZO without registration in the vehicle documents.

Function: - Variable flap control of the original or retrofitted flap exhaust system - Can be controlled via steering wheel buttons Compatible vehicles:VehicleVehicle typePowerEngine capacityEngineYear of constructionBMW 2er Coupe (F87)M2272kW / 370hp2979cm³N55 B30 A11.15 - 06.18BMW 2er Coupe (F87)M2 Competition302kW / 411hp2979cm³S55 B30 A06.18 - 06.21BMW 2er Coupe (F87)M2 CS331kW / 450hp2979cm³S55 B30 A11.19 - 06.21 Note: This product is NOT approved in the StVZO and is NOT intended for sale within the EU! This item is intended exclusively for show and motorsport purposes and must not be used/installed on public roads. If the component is installed on/in the vehicle, the operating license expires!The pictures shown are examples.

Erste Hand, unfallfrei Nur Shell V-Power oder Aral Ultimate Alle Services bei Aulitzky, BMW oder Raab Motorsport durchgeführt. Kein Wartungsstau. Kein Notverkauf. Fast alle Serienteile sind vorhanden (Sitz, Rücksitzbank, Ansaugung, Auspuff, Fahrwerk, Bremsbeläge…) TÜV komplett alles eingetragen (außer Bremsbeläge)   - Leistung Aulitzky mit Abstimmung für Rennstrecke. Ca. 520 PS und 700 NM     - Tracktool - Apple Carplay ganzer Bildschirm - Aulitzky App inkl. Dongle - Akrapovic Auspuff ab OPF - Liteblox Batterie - Bremsbeläge Pagid RSL29 vorne 70% hinten 95%  - Bremsbelüftung Speed Engineering - Bremskolben Edelstahl und spezielle Manchetten - Stahlflexbremsleitung - Charge und Boost Pipe - Clubsport Set und Teppich - CS Frontspoiler org. BMW - Diffusor org. BMW - Differential Westwood Performance mit Höherlegungskit - Display AK-Motion - Downpipe HJS - Eventuri Ansaugung - Fahrwerk KW Clubsport mit Nordschleifenabstimmung Wolfgang Weber - Felgensatz Protack One 10x19 ET20 und 10,5x19 ET40 mit Continental Sport Contact 7; 265/30/19 und 285/30/19 (80%) - auf Wunsch zweiter Felgensatz Protack One 10x19 ET20 und 10,5x19 ET40 mit Nankang CR-S; 265/30/19 und 285/30/19 NEU Stehbolzen - GTS Flash - Heckspoiler org. BMW - Hosenträgergurte Schroth - Kurbelwellensicherung Aulitzky - Ladeluftkühler Wagner - Recaro Pole Position inkl. Schiene - Spurstangen KW - Stabi VA H&R - Upgrade Zündspulen und Zündkerzen  - kleiner Achsstand Westwood Performance (Uniball VA und HA) Das Fahrzeug kann über unsere Hausbank finanziert werden. Bei Fragen und ernsthaftem Interesse freuen wir uns über eine Kontaktaufnahme.

The Endless pads are an excellent brake pad for everyday road use with sporadic track days. Despite reduced dust and noise emissions, the MX72 brake pad impresses with excellent deceleration values even in the high temperature range. In contrast to the ME20 and ME22 pads, the MX72 has heat protection plates.Coefficient of friction 0.37 - 0.47 µOperating temperature 50 - 700 °CSemi-metallic pad For the front axle. Compatible vehicles:BMW M2 F87 Competition with large gray 6-piston sports brakeBMW M2 F87 CSBMW M5 F10 Motorsport article - without STVZO approval.

The Endless pads are an excellent brake pad for everyday road use with sporadic track days. Despite reduced dust and noise emissions, the MX72-Plus brake pad impresses with excellent deceleration values, even in the high temperature range. In contrast to the ME20 and ME22 pads, the MX72-Plus has heat protection plates.Coefficient of friction 0.39 - 0.47 µOperating temperature 50 - 750 °CSemi-metallic pad For the rear axle. Compatible vehicles:BMW M2 F87 Competition with large gray 6-piston sports brake Motorsport article - without STVZO approval.

With the AP-Racing Big Brake Kit, we offer a high-performance solution especially for track days and for race track drivers. The friction rings are mounted floating on the high-strength, milled aluminium pots. The advantages of this are, on the one hand, the lower weight and, on the other, the fact that the friction rings can be replaced cost-effectively when they wear out. The AP-Racing calipers are racing calipers without dust boots, which are only recommended for use on the racetrack (regular cleaning of the calipers is necessary in normal road traffic). Details and scope of delivery:- Big Brake Kit for the front/rear axle, consisting of AP Racing calipers and J-Hook brake discs in 378×34mm- AP Racing 6-piston brake caliper- Brake discs 378×34mm, J-Hook- CNC milled brake caliper adapter incl. material certificate- Braided steel brake lines- incl. brake padsAluminium pots and floating mounting Compatible vehicles:- BMW F87 M2 incl. Competition/CS- BMW F8x M3/M4 incl. Competition NOTES:If we do not expressly refer to a parts certificate or general operating licence (ABE) in the product text, this is a motorsport article that is not approved in the German Road Traffic Regulations (StVZO) and therefore the operating licence expires if no registration is made in accordance with § 21 StVO!This brake system can only be registered by us after special tests. Please note that vehicle spare parts should only be installed by a qualified specialist workshop in order to ensure that they function properly and that the vehicle is roadworthy.

Elegantly sporty - 3DDesign combines a perfect fit with uncompromising part quality. The best M2C set the market has ever seen. Compatible vehicles:BMW 2 Coupe (F22, F87) M2 CS 2019-2021BMW 2 Coupe (F22, F87) M2 Competition 2018-2021

The Centre console cover for the rear seat made of pre-preg carbon fiber perfectly emphasize the style of the vehicle.Details:- 100% pure pre-preg carbon fibre construction- OEM style carbon fibre- High gloss finish- Perfect fit- Registration free Compatible vehicles: - BMW F80 M3 - BMW F82 M4 Coupe - BMW F83 M4 Cabrio - BMW F87 M2 - BMW F87C M2 - BMW G87 M2  Note: This is NOT an original BMW product!

Suitable for the following models:BMW F87 M2 Competition 302kW/411hpBMW F80 M3 317kW/431hpBMW F80 M3 Competition 331kW/450hpBMW F80 M3 CS 338kW/460hpBMW F82/F83 M4 317kW/431hpBMW F82/F83 M4 Competition 331kW/450hpBMW F82 M4 CS 338kW/460hpBMW F82 M4 GTS 368kW/500hp The Wagner tuning Ø57mm charge pipe kit for the S55 engine. Discover the new Performance Ø57mm Charge Pipe Kit from Wagner Tuning for your S55 engine. Designed to maximize the performance of your vehicle while improving durability, this kit offers a range of advanced features that will give your vehicle a real performance boost. Features:Optimized fluid dynamics:Compared to the OEM Charge Pipes, Wagner Tuning Charge Pipes offer a larger flow diameter and minimize internal cross-sectional changes, resulting in 40% less backpressure. This relieves the turbochargers and improves the response behavior.Robust construction:The charge pipes are made entirely of aluminum and withstand high pressures as well as aging. Unlike OEM products, they do not burst under load.Special powder coating:The Charge Pipes are coated with a special textured powder coating that not only improves corrosion protection, but also ensures an OEM look. Advantages:Maximized performance:The Performance Charge Pipe Kit improves flow dynamics and reduces back pressure, resulting in increased engine performance and responsiveness.Durability:Thanks to the robust aluminum construction and high-quality powder coating, Charge Pipes offer long-term durability and reliability.Easy installation:The kit is easy to install and requires no complex modifications. With the included mounting hardware, installation is a breeze. Scope of delivery:2 aluminum charge air pipes (black coated)2 silicone adapters (black)4 stainless steel hose clamps1 mounting material1 parts certificate With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

Facts: Material: Carbon Manufacturer: Eventuri Parts certificate: without Eventuri carbon fibre charge pipes for S55 F8X models Full carbon S55 Chargepipes by Eventuri. Perfect thermal insulation and built for high pressures thanks to one of the most durable and robust materials on the tuning market. The full carbon fibre charge pipes for S55 engines (F-Series) are not only visually stunning, but also a real technical innovation. Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction BMW 2 Series Coupe (F87)M2 Competition302kW / 411hp2979cm³S55 B30 A06.18 - 06.21 BMW 3 Series (F80)M3317kW / 431hp2979cm³S55 B30 A03.14 - 10.18 BMW 3 Series (F80)M3 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 10.18 BMW 3 Series (F80)M3 CS338kW / 460hp2979cm³S55 B30 A01.18 - 10.18 BMW 4 Series (F82/F83)M4317kW / 431hp2979cm³S55 B30 A03.14 - 07.20 BMW 4 Series (F82/F83)M4 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 07.20 BMW 4 Series Coupe (F82)M4 CS338kW / 460hp2979cm³S55 B30 A07.17 - 06.19 BMW 4 Series Coupe (F82)M4 GTS368kW / 500hp2979cm³S55 B30 A03.16 - 06.19

Facts: - Charge- & Boostpipe aluminium black - incl. mounting rubbers, clamps Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 3 Series (F80)M3317kW / 431hp2979cm³S55 B30 A03.14 - 10.18 BMW 3 Series (F80)M3 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 10.18 BMW 3 Series (F80)M3 CS338kW / 460hp2979cm³S55 B30 A01.18 - 10.18 BMW 4 Series (F82/F83)M4317kW / 431hp2979cm³S55 B30 A03.14 - 07.20 BMW 4 Series (F82/F83)M4 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 07.20 BMW 4 Series Coupe (F82)M4 CS338kW / 460hp2979cm³S55 B30 A07.17 - 06.19

Verwandeln Sie Ihren F8X mit dem BlackBoost Kühllufteinlass-System in ein leistungsstarkes Kraftpaket. Erleben Sie mehr Leistung, Stil und Fahrdynamik mit diesem Premium-Upgrade. In der Welt der Leistungsmodifikationen ist die Airbox eine der wichtigsten Motorkomponenten, die Sie aufrüsten sollten. Die werksseitige Airbox ist in Bezug auf den Luftstrom und die Filterfläche sehr restriktiv. Unsere Kühllufteinlässe wurden entwickelt und konstruiert, um diese werksseitigen Einschränkungen zu überwinden und den maximalen Luftstrom mit den niedrigstmöglichen Temperaturen zu liefern, wenn man die Platzverhältnisse berücksichtigt. Die BlackBoost Cold Air Intakes sind so konzipiert, dass sie mit der Motorhaube des Fahrzeugs abschließen und eine gleichmäßige Abdichtung mit den Gummidichtungen der Airbox gewährleisten, während sie auch eine große Oberfläche gewährleisten, um richtig arbeiten zu können. Die BlackBoost Twin-Flow-Filter wurden speziell für einen maximalen Luftstrom und eine große Oberfläche entwickelt. Das BlackBoost Ansaugkit ist eine Plug-and-Play-Lösung, die ohne weitere Anpassungen perfekt funktioniert und für die kein zusätzliches Softwaretuning erforderlich ist. Es funktioniert auch problemlos in Kombination mit Turbo-Upgrades, Downpipes, Methanol-Einspritzungen etc., um die notwendige Luftströmung zu entfesseln und die volle Kapazität der Maschine nutzen zu können für diejenigen, die 1000+ WHP-Werte anstreben. Lieferumfang: - Pulverbeschichtete Airbox - Filter - BlackBoost CFD entwickelte Filteradapter Wesentliche Merkmale: - Nachgewiesene Leistungssteigerung von 8 bis 30+ PS bei Serienfahrzeugen - Verbessertes Ansprechverhalten über den gesamten Drehzahlbereich - Optimierter Luftstrom und vergrößerter Volumenbereich im Vergleich zur Serienausstattung - Vergrößerte Oberfläche der Filterelemente - Kann den Luftstrom für Konfigurationen mit 1000+ WHP unterstützen - Größere Oberfläche des Filterelements im Vergleich zum OEM - Plug-and-Play Installation zum Anschrauben - Keine ECU-Abstimmung erforderlich Kompatible Fahrzeuge: BMW M2 (F87) Competition BMW M2 (F87) Competition M BMW M3 (F80) BMW M3 (F80) Competition BMW M3 (F80) Competition M BMW M3 (F80) CS BMW M4 (F82) BMW M4 (F82) Competition BMW M4 (F82) Competition M BMW M4 (F82) GTS BMW M4 (F83) Competition M

Includes the following services:- Removing and replacing the connecting rod bearings- Check and measure crankshaft journals- Check and adjust the oil pump- Clean all parts- Wheel alignment- Oil & filter change- incl. all parts such as bearings, screws, seals, oil filter and engine oil (10W60)- Entry in the service booklet with BMW serial number stamp- 1 liter oil refillIn addition, and depending on requirements, we can also replace the spark plugs and engine mounts for an additional charge. Please note:This service can only be carried out at our company headquarters!

Crank Hub Fix incl. working time and the following components:- Oil pan gasket- original set of aluminum screws- Valve cover gasket- Camshaft bolts- Chain tensioner sealing ring- Locking cap- Oil filter- Engine oil- incl. Aulitzky crankshaft lock Attention:The Crank Hub Fix is only available from us including installation.Shipping is not offered! Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 2er Coupe (F87)M2 Competition302kW / 411hp2979cm³S55 B30 A06.18 - 06.21 BMW 2er Coupe (F87)M2 CS331kW / 450hp2979cm³S55 B30 A11.19 - 06.21 BMW 3er (F80)M3 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 10.18 BMW 4er (F82)M4 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 07.20

Scope of delivery: - Aulitzky tuning crankshaft lock incl. 8 original fastening screws - Fitting instructions Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 2er Coupe (F87)M2 Competition302kW / 411hp2979cm³S55 B30 A06.18 - 06.21 BMW 3er (F80)M3317kW / 431hp2979cm³S55 B30 A03.14 - 10.18 BMW 3er (F80)M3 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 10.18 BMW 4er (F82/F83)M4317kW / 431hp2979cm³S55 B30 A03.14 - 07.20 BMW 4er (F82/F83)M4 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 07.20

Your vehicle is missing a data display! We have it - the CANchecked display for the F-series (F21, F22, F23, F30, F31, F32, F33, F80, F82, F83 and F87. Access to all data from the engine:The sensors are queried directly via Can Bus and are displayed on our tried-and-tested MFD28. The display for the E-series comes with a vehicle-specific cover and fits into the interior like an original part. This means that the ventilation through the slots remains intact. Our display emulates a manufacturer tester so that all detailed values are available. We have optimized the protocol to achieve maximum polling speed. Details:- integrates perfectly into the vehicle interior- Up to 128 sensors can be queried- 10 individually configurable views with our DSS - Display Setup Software- ready-made views for a quick start with our display- simply plug and play via our cable set - plug in, done- 4 additional analog inputs for exhaust gas temperature, oil pressure and more- Best readability - optional anti-reflective film included- Query the sensors like manufacturer diagnostic tools Performance meter:Measure your acceleration times in our performance widget - 0-100, 100-200, 0-200 Data jogging:Log all data to the internal SD card. Whether “on-demand” (start at the tap of a finger) or permanently. All data from your last turn is saved. Preset alarms:Preset alerts can be easily activated and customized. For example, receive a large warning message if the exhaust gas temperature is above 900 degrees. 4 additional analog inputs:Additional temperature and/or pressure sensors can be connected for further monitoring options. e.g. exhaust gas temperature or exhaust gas back pressure. An ethanol sensor can be connected to one of the digital inputs. Read out/delete errors:Read out errors from the engine control unit in plain text and also delete them Individual designWhether it's the individual start screen or the selection from a variety of different widgets. Make the display your display! Switch pages with the cruise control button:To make driving safer, we have integrated the cruise control switch here with the company Lightweight-Performance. When cruise control is not active, you can use the up/down button to switch the views in the display. This has the following advantages:- No “searching” for the display while concentrating on the road ahead- Switching even when wearing gloves (on trackdays)- Quick and safe checking of overview pages and then returning to the main viewDriver Dynamics:We have developed a special view for all track drivers who want to further improve their driving style and become a second or two faster:- G-forces (lateral and longitudinal acceleration)- Vehicle speed- Steering angle- accelerator pedal position- Brake pressure This sensor system gives the driver the opportunity to aim for even higher speeds in bends and to hit the braking point even later. Together with the data log in the internal memory, which can be downloaded from the display after a track day, this offers a great opportunity to synchronize the data with a video. Access to all data from the engine control unit:We supply your display with a ready-made TRI file as standard. All sensors that are queried are defined here. Temperatures:Engine water temperature, oil temperature, intake temperature, exhaust temperature, transmission temperature Pressures:Boost pressure, boost pressure target, fuel pressure high pressure pump, exhaust back pressure, low pressure, front brake pressure, rear brake pressure, oil pressure Lambda/mixture:Lambda value target/actual, injection correction, long-term lambda adjustment, total ignition angle, ignition angle per cylinder Other data:RPM, air mass (g/s), vehicle speed, throttle angle, battery voltage, gear, accelerator pedal position, longitudinal and lateral acceleration, steering angle, yaw angle, torque, power, boost pressure control valve activation If values are missing, they can easily be added. It always depends on the engine whether it supports the values, sometimes not all sensors are available. Attention: Not all values are available for all engines! For which engines and models is the display for F-series:The display fits the following vehicles:- 1 Series: F20, F21- 2 Series: F22, F23- 3 Series: F30, F31- 4 Series: F32, F33- M models: F87, F80, F82, F83 (Convertible) We currently support the following engines, unlisted engines can be added on request:- B48- B58- N13- N47- N55- N57- S55 The respective version for RHD (right-hand drive) is also available. The data may vary between the different engines. Read out and delete errors:Swipe down to access the “DTC” (Diagnostic Trouble Codes = fault memory). The display reads the fault memory from the engine. Optionally, you can also delete these directly on the display. Errors for the engine are displayed in plain text so that you can decide for yourself whether you can continue driving. MFD28 Technical data:- Dimensions: 70.3 x 52mm - Hardware: 2.8” TFT screen, touchscreen, MicroSD, MicroUSB- High-quality milled aluminum front frame- Symmetrical display - ideal for rotating it by 90- Views completely freely configurable on the PC with our DSS - Display Setup Software- Up to 64 widgets per display- 64 sensors (Can Bus + internal)- 10 views- 4x analog inputs- Optional external switching flash- Can bus switching- Can Bus protocols: UDS, KWP2000, OBD Supported values:Many customers always ask: “Which values can I query from my control unit”. The answer: “ALL”. Our MFD28 is compatible with ISO 11898-2 and SAE J2284.The control unit manufacturers themselves determine which values are sent via the CAN bus interface. The documentation is important here - possibly even in the form of a DBC file that can be imported directly. You can also access our extensive list of already implemented control units. This can be found in the download area. A total of up to 50 sensors can be queried if the manufacturer supports this.Broadcast data as well as OBD2 queries via Can Bus (11bit/29bit) are implemented. Special protocols such as TP2.0 from VW/Audi and UDS are also available. DSS - Display Setup Software:With our DSS - Display Setup Software, the display can be conveniently configured on the PC. The Can Bus protocol can be customized, you can import DBC files and design the displays with your own widgets.The log viewer downloads log files from the display. These can then be viewed and values can be individually selected and scaled.A built-in Can Bus logger makes it possible to take a close look at the log. This can be used to reverse-engineer unknown Can Buses.

Autotecknic dry carbon fibre diffuser for 2 Series F87 incl. Competition Compatible vehicles:BMW 2 Coupe (F22, F87) M2 2015-2018BMW 2 Coupe (F22, F87) M2 Competition 2018-2021

The 3DDesign carbon diffuser for the F87 is made of carbon fiber/carbon fiber and gives the rear of the vehicle a new shine in no time at all. Installation is extremely simple - but the effect is all the greater. The calm design of the diffuser emphasizes the elegance of the otherwise sporty vehicle. Incl. parts certificate Compatible vehicles:BMW 2 Coupe (F22, F87) M2 2015-2018BMW 2 Coupe (F22, F87) M2 CS 2019-2021BMW 2 Coupe (F22, F87) M2 Competition 2018-2021

The F87/F22's adaptive LED headlights are already aggressive with the angled 3/4-style etched rings, but the vehicle has left room for improvement. The Yellow DRL upgrade gives your car the race-inspired look it deserves. Details:- Complete Yellow DRL LED boards for left and right headlights- Thermally conductive adhesive- Plug-and-play installation (fully reversible)- All OEM functionalities are retained- Complete installation instructions- 2 year warranty- Not approved in the area of the StVZO. Only suitable for use in motorsport. Installation is very simple: the modules can be easily installed in your own garage using plug-and-play and simple tools. The price does not include installation. Compatible vehicles:BMW F87/F22 2 Series LCI LED only (2018-2021)Note: This is NOT an original BMW product!Note: This is NOT an original BMW product!

High-quality side skirt set for the F87 with material certificate - Improved performance through more downforce - Vacuum infusion technology for rigidity and low weight - High-gloss UV-protected clear coat to protect against sun damage - Products are supplied with all necessary assembly parts - Guaranteed accuracy of fit - Made in California, USA Push the boundaries of what's possible! Dare to show your individualism with our PSM Dynamic Aerodynamic Automotive Components! These creations are designed to provide more stability at high speeds, increase downforce and smooth airflow. All products are handcrafted from the finest materials. All of our products are designed to fit perfectly with the manufacturer's original lines, seamlessly blending style and performance in one amazing package. SPECIAL PRICE - STOCK SALE - only one piece in stock! Compatible vehicles:VehicleTypePowerEngine capacityEngineYear of constructionBMW 2 Series Coupe (F87)M2272kW / 370hp2979ccN55 B30 A11.15 - 06.18BMW 2 Series Coupe (F87)M2 Competition302kW / 411hp2979ccS55 B30 A06.18 - 06.21BMW 2 Series Coupe (F87)M2 CS331kW / 450hp2979ccS55 B30 A11.19 - 06.21

The fender elements made of pre-preg carbon fiber perfectly emphasize the style of the vehicle.Details:- 100% pure pre-preg carbon fibre construction- OEM style carbon fibre- High gloss finish- Perfect fit- Registration free Compatible vehicles:- BMW F87 2 Series M2/Competition Note: This is NOT an original BMW product!

The G90 Performance rear diffuser made of Pre-Preg carbon fibre gives your vehicle a distinctly sporty aggressiveness and gives it a lot of presence on the road. Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x rear diffuser in prepreg carbon fibre Compatible vehicles:BMW M5 G90BMW M5 G99Note: This is NOT an original BMW product!

Facts:- Plug & Play installation using illustrated installation instructions- Special wiring harness for your vehicle- High-quality electronics “Made In Germany”- Electronic components with product qualification for motor vehicles according to AEC-Q100 installed- Support from us as co-developer and manufacturer Scope of delivery:The scope of delivery includes the motorsport add-on module, an engine-specific wiring harness, illustrated installation instructions in DE/EN and a BYPASS connector, which you can use to restore your vehicle to series production. Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeYear of constructionBMW 8er (F91/F92/F93)M8 441kW / 600hp4395cm³S63 B44 B07.19 - BMW 8er (F91/F92/F93)M8 Competition460kW / 625hp4395cm³S63 B44 B07.19 - LEGAL INFORMATION: THE INSTALLATION OF ADDITIONAL ELECTRONICS IS A STRUCTURAL MODIFICATION TO THE MANUFACTURER'S ELECTRONICS. WITHOUT REGISTRATION IN THE VEHICLE DOCUMENTS BY MEANS OF AN INDIVIDUAL CERTIFICATE FROM TÜV; DEKRA OR OTHER RECOGNIZED TESTING INSTITUTES, THE INSTALLATION WILL INVALIDATE THE OPERATING LICENSE. IF USED ON PUBLIC ROADS, THIS WILL RESULT IN THE LOSS OF INSURANCE COVER. WE DO NOT CURRENTLY HAVE A PARTS CERTIFICATE FOR YOUR VEHICLE. THEREFORE, THIS SYSTEM IS EXCLUSIVELY SUITABLE FOR MOTORSPORT. ATTENTION: IF YOU USE THE ADDITIONAL ELECTRONICS, YOU MAY LOSE YOUR WARRANTY CLAIMS AGAINST THE SELLER OR WARRANTY CLAIMS AGAINST THE MANUFACTURER. IF YOU HAVE ANY FURTHER QUESTIONS, PLEASE DO NOT HESITATE TO CONTACT US!

Facts:Power increase: 15-18hp, 17-20ft-lbMaterial: CarbonManufacturer: EventuriParts certificate: For this product a certificate is available for certain regions and vehicles (details below) The F5X JCW Eventuri intake system is a perfect example of our "Complete System" principle. It is a sealed system that ensures the turbo does not draw hot air from the engine bay, but is complemented with a functional cowl scoop that forces ambient air into the intake duct. This duct has a larger internal volume than the standard version and also draws in air at the standard point above the radiator. The combination of a closed system with an air scoop results in lower intake temperatures than the standard airbox and avoids heat sacks, which are a frequent problem, especially on more powerful MINIs. To ensure the smoothest possible flow, we use our patented Venturi filter housing, which has an integrated MAF section for a seamless flow path to the turbo. The Eventuri DifferenceThe F5X JCW Eventuri system uses our patented carbon fiber housing that provides an aerodynamically efficient airflow path from the filter to the turbo. It's not another cone filter with a heat shield, but a unique design that utilizes the Venturi effect and maintains laminar flow conditions to reduce turbo drag. Each intake system consists of:Carbon fiber venturi filter housing with integrated MAF pipeCustom high flow dry filterCarbon fiber inlet ductCarbon fiber inlet scoopCNC machined MAF bossLaser cut stainless steel brackets Parts certificateThe manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles:* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24Countries Model Type approval*DE/AT F1H e1*2007/46*2018*..DE/AT F2GC e1*2007/46*2064*..DE/AT F2X e1*2007/46*1824*..DE/AT FMK e1*2007/46*1683*..DE/AT FML2 e1*2007/46*1678*..DE/AT FMX e1*2007/46*1682*.. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Mini Clubman (F54)JCW225kW / 306hp1998cm³B48 A20 E07.19 - Mini (F56)JCW GP225kW / 306hp1998cm³B48 A20 E03.20 -

The Competition intercooler kit is suitable for:Nissan GT-R 2011-2012 390KW/530hpNissan GT-R 2012-2016 404KW/550hp Revolutionary performance for your Nissan GT-R R35 - The Competition high performance intercooler kit Ready to give your Nissan GT-R R35 an impressive performance boost? The Competition High Performance Intercooler Kit is the answer you've been waiting for. With cutting-edge technology and a bespoke design, this kit ensures an exhilarating driving experience. These Competition high performance intercoolers set new standards. With net dimensions of 2x (360mm x 294mm x 110mm) per radiator, equating to a total of 23.3 liters, they offer an impressive 76% larger flow area and an astonishing 94% more charge air volume compared to the original intercoolers. This means an explosive increase in performance and exceptional cooling capacity. Our high-performance grilles offer remarkable cooling performance. Despite their impressive size, both intercoolers together weigh only 2x 9.1 kg, which means extra power without unnecessary weight. The cast aluminium end boxes were developed in the CAD system and optimized using flow analyses in the CFD system to perfect the internal air flow. The connection diameters at the inlet and outlet have been extended to Ø70 mm, which is why the kit includes two reinforced silicone hoses. The result? Excellent cooling properties with minimal back pressure. This intercooler kit includes matching carbon air ducts to ensure that the intercoolers are optimally supplied with air. With a tested pressure resistance of up to 6 bar, this kit is suitable for racing. It is designed to excel in the most demanding conditions. All our intercoolers are equipped with an anti-corrosion coating that not only protects against environmental influences, but also offers excellent heat conduction properties. This guarantees constant and optimum cooling performance, accompanied by a significant increase in performance. You receive a completely ready-to-install kit that makes installation child's play. No complex adjustments required. Quality is our top priority. All our products are subject to rigorous quality control to ensure they meet the highest standards. Realize your performance dreams with the Competition high performance intercooler kit. Get the most out of your Nissan GT-R R35 now and experience a new dimension of driving pleasure! Advantages of the Wagner Tuning intercooler:- improved cooling performance- 76 % larger inflow area- 94 % more charge air volume- flow-optimized- Plug & Play Scope of delivery:2 intercoolers, black powder-coated4 cast aluminum connectors2 silicone hoses1 carbon air duct1 mounting material1 mounting instructionAttention: Not approved in the area of the StVZO.