Charge- & Boostpipe Set aluminum black | fits BMW M2/M3/M4 incl. Competition/CS (F87/F80/F82/F83) S55 | Aulitzky Tuning

Actuator for exhaust flap OEM part number: 18307851568 (18 30 7 851 568) Suitable for the following BMW models with exhaust flap: F80 F82 F83 F85 F86 F87N F90 F91 F92 F93 F95 F96 F97 F98 G01 G02 G05 G06 G14 G15 G16 G20 G21 G22 G23 G26 G30 G42 G82 G83

Facts: - 2x 3.15“ (80mm)/ 2.56” (65mm), replaces the main catalyst - with 200 cell HJS stainless steel sports catalyst - Euro 6 compatible - with Thermo-Integral insulation - with ECE approval* Compatible vehicles:VehicleVehicle typePowerEngine capacityEngineYear of construction BMW 3 Series (F80)M3317kW / 431hp2979cm³S55 B30 A03.14 - 10.18 BMW 3 Series (F80)M3 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 10.18 BMW 3 Series (F80)M3 CS338kW / 460hp2979cm³S55 B30 A01.18 - 10.18 BMW 4 Series (F82/F83)M4317kW / 431hp2979cm³S55 B30 A03.14 - 07.20 BMW 4 Series (F82/F83)M4 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 07.20 BMW 4 Series Coupe (F82)M4 CS338kW / 460hp2979cm³S55 B30 A07.17 - 06.19 BMW 4 Series Coupe (F82)M4 GTS368kW / 500hp2979cm³S55 B30 A03.16 - 06.19 Note: Depending on the software version, the engine control light may light up. We recommend the purchase of an OFF set module or software customisation. *This downpipe has ECE approval so that it can be used within the scope of the German Road Traffic Licensing Regulations (StVZO) without registration in the vehicle documents.

Facts: - Tailpipes: 4x black - 3.0 inch (76mm) stainless steel flap exhaust system from cat/OPF (depending on vehicle) - MSD removal - Mounting for the original electric flap actuator - Exhaust flaps with ceramic bearings - Made in Germany (Lake Constance) - with ECE approval* Scope of delivery: - 1x Aulitzky Exhaust exhaust system ex cat/OPF - 4x black tailpipes - ECE handout Compatible vehicles:VehicleVehicle typePowerEngine capacityEngineYear of construction BMW 3er (F80)M3317kW / 431hp2979cm³S55 B30 A03.14 - 10.18 BMW 3er (F80)M3 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 10.18 BMW 3er (F80)M3 CS338kW / 460hp2979cm³S55 B30 A01.18 - 10.18 BMW 4er (F82/F83)M4317kW / 431hp2979cm³S55 B30 A03.14 - 07.20 BMW 4er (F82/F83)M4 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 07.20 BMW 4er Coupe (F82)M4 CS338kW / 460hp2979cm³S55 B30 A07.17 - 06.19 *Our combination certificate is already available (includes intake, intercooler, boost / charge pipe kit, downpipe, exhaust system, 560hp Aulitzky App performance upgrade and 114dB (non-OPF) or 95dB (OPF) increase in stationary noise). In conjunction with the standard flap control (with type approval), this flap exhaust system has ECE approval so that it can be used legally within the scope of the StVZO without registration in the vehicle documents.

Function: - Variable flap control of the original or retrofitted flap exhaust system - Can be controlled via steering wheel buttons Compatible vehicles:VehicleVehicle typePower outputengine capacityEngineYear of construction BMW 3 Series (F80)M3317kW / 431PS2979ccS55 B30 A03.14 - 10.18 BMW 3 Series (F80)M3 Competition331kW / 450PS2979ccS55 B30 A03.16 - 10.18 BMW 3 Series (F80)M3 CS338kW / 460PS2979ccS55 B30 A01.18 - 10.18 BMW 4 Series (F82/F83)M4317kW / 431hp2979ccS55 B30 A03.14 - 07.20 BMW 4 Series (F82/F83)M4 Competition331kW / 450PS2979ccS55 B30 A03.16 - 07.20 BMW 4 Series Coupe (F82)M4 CS338kW / 460PS2979ccS55 B30 A07.17 - 06.19 BMW 4 Series Coupe (F82)M4 GTS368kW / 500PS2979ccS55 B30 A03.16 - 06.19 Note:This product is NOT approved in the StVZO and is NOT intended for sale within the EU!This article is intended exclusively for show & motorsport purposes and may not be used/installed in public road traffic.If the component is installed on/in the vehicle, the operating licence expires!The pictures shown are examples.

The Endless pads are an excellent brake pad for racing and everyday use. The ME22 is the further development of the popular ME20 brake pad. Unlike the MX72 pad, the ME22 has no heat shields.Coefficient of friction 0.36 - 0.42 µOperating temperature 150 - 800 °CSemi-metallic pad For the rear axle. Compatible vehicles:BMW 4-piston BMW (Performance) brake caliper, blue caliper for F-series vehicles, such as M135i M140i F20 F21, M235i M240i F22 F23, 335i 340i F30 F31 F34, 435i 440i F32 F33 F36, M2 F87, M3 F80,M4 F82 F83Alpina models such as the B3Motorsport articles - without STVZO approval.

The Endless pads are an excellent brake pad for racing and everyday use. The ME22 is the further development of the popular ME20 brake pad. In contrast to the MX72 pad, the ME22 has no heat protection plates.Coefficient of friction 0.36 - 0.42 µOperating temperature 150 - 800 °CSemi-metallic pad For the front axle. Compatible vehicles:BMW 4-piston BMW (Performance) brake caliper, blue caliper on F-series vehicles, such as M135i M140i F20 F21, M235i M240i F22 F23, 335i 340i F30 F31 F34, 435i 440i F32 F33 F36, M2 F87, M3 F80,M4 F82 F83Alpina models such as the B3 Motorsport articles - without STVZO approval.

The Endless pads are an excellent brake pad for racing and everyday use. The MX87 is the further development of the MX72 and not only builds up friction with the disc faster, but is also more heat-resistant. Temperature range from 30-700CLow brake disc wearamazing longevity of the padReduction of heat cracksimproved response behaviourCoefficient of friction of 0.38-0.46 By far the greatest speciality, however, is the balancing act between suitability for everyday use and use on trackdays:This means that this rubber is suitable in every situation, whether on long trackdays, or in everyday use.However, if the vehicle is mainly used on the track, we recommend the N39S. For the front axle. Compatible vehicles:BMW 4-piston BMW (Performance) brake caliper, blue caliper on F-series vehicles, such as. M135i M140i F20 F21, M235i M240i F22 F23, 335i 340i F30 F31 F34, 435i 440i F32 F33 F36, M2 F87, M3 F80,M4 F82 F83Alpina models such as the B3Motorsport articles - without STVZO approval.

The Endless pads are an excellent brake pad for everyday road use with sporadic track days. Despite reduced dust and noise emissions, the MX72 impresses with excellent deceleration values even in the high temperature range. In contrast to the ME20 and ME22 pads, the MX72 has heat protection plates.Coefficient of friction 0.37 - 0.47 µOperating temperature 50 - 700 °CSemi-metallic pad For the rear axle. Compatible vehicles:BMW 4-piston BMW (Performance) brake caliper, blue caliper for F-series vehicles, e.g. M135i M140i F20 F21, M235i M240i F22 F23, 335i 340i F30 F31 F34, 435i 440i F32 F33 F36, M2 F87, M3 F80,M4 F82 F83Alpina models such as the B3Motorsport articles - without STVZO approval.

With the AP-Racing Big Brake Kit, we offer a high-performance solution especially for track days and for race track drivers. The friction rings are mounted floating on the high-strength, milled aluminium pots. The advantages of this are, on the one hand, the lower weight and, on the other, the fact that the friction rings can be replaced cost-effectively when they wear out. The AP-Racing calipers are racing calipers without dust boots, which are only recommended for use on the racetrack (regular cleaning of the calipers is necessary in normal road traffic). Details and scope of delivery:- Big Brake Kit for the front/rear axle, consisting of AP Racing calipers and J-Hook brake discs in 378×34mm- AP Racing 6-piston brake caliper- Brake discs 378×34mm, J-Hook- CNC milled brake caliper adapter incl. material certificate- Braided steel brake lines- incl. brake padsAluminium pots and floating mounting Compatible vehicles:- BMW F87 M2 incl. Competition/CS- BMW F8x M3/M4 incl. Competition NOTES:If we do not expressly refer to a parts certificate or general operating licence (ABE) in the product text, this is a motorsport article that is not approved in the German Road Traffic Regulations (StVZO) and therefore the operating licence expires if no registration is made in accordance with § 21 StVO!This brake system can only be registered by us after special tests. Please note that vehicle spare parts should only be installed by a qualified specialist workshop in order to ensure that they function properly and that the vehicle is roadworthy.

MOVIT DDE steel brake system 380x32mm (4 piston calliper) for the rear axle, from 19 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined. The uncompromising selection of materials in production results in a highly unique product that fulfils the diverse requirements of extreme automotive applications. The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple layer of paint.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts Attention: The conversion means that only rims with at least 19 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. MOVIT sports brake callipers, 4-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force MOVIT sports brake discs, 380x32mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Highest fading resistance- Special alloy for high thermal conductivity MOVIT comfort brake pads- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x comfort brake pads2x steel flex lines1x handbrake calliper (depending on selected option)1x installation material1x installation instructions and running-in instructions1x parts certificate Compatible vehicles:BMW 2 Series (F87) Coupé M2 272kW / 370PS / 2979cm³ / N55BMW 3 Series (E92) Coupé M3 309kW / 420PS / 3999cm³ / S65BMW 4 Series (F82) Coupé M4 317kW / 431PS / 2979cm³ / S55

MOVIT DDE steel brake system 396x36mm (6 piston calliper) for the front axle, from 20 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined. The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications. The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple layer of paint.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts Attention: The conversion means that only rims with at least 20 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. MOVIT sports brake callipers, 6s1, 6-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force MOVIT sports brake discs, 396x36mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Maximum fading resistance- Special alloy for high thermal conductivity MOVIT comfort brake pads, BE-6s1- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x assembly material1x installation instructions and running-in instructions1x parts certificate Compatible vehicles:Audi R8 type 420 -2018Audi S6 Type 4FBMW M2 F87BMW M3 E92BMW M4 F82BMW X5 E70Ford Mustang VI 2016- 2.3l EcoboostFord Mustang VI 5.0 V8 GT 2015-Mercedes Benz W906 Sprinter 3t & 3.5t

AutoTecknic carbon fibre front bumper canards are the complete solution to aerodynamically optimise the handling of the front of a car. Made from lightweight and durable carbon graphite composites, AutoTecknic carbon fibre front bumper canards help to increase front downforce at high speeds. The additional downforce stabilises the car's chassis during hard cornering and increases traction for faster lap times. The optical properties of the carbon also give the F80, F82, F83 a more aggressive design. Compatible vehicles:BMW 3 (F30, F80) M3 2014-2018BMW 3 (F30, F80) M3 CS 2018-2018BMW 3 (F30, F80) M3 Competition 2016-2018BMW 4 Convertible (F33, F83) M4 2014-2020BMW 4 Convertible (F33, F83) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 2014-2020BMW 4 Coupe (F32, F82) M4 CS 2017-2019BMW 4 Coupe (F32, F82) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 GTS 2016-2019

Suitable for the following models:BMW F87 M2 Competition 302kW/411hpBMW F80 M3 317kW/431hpBMW F80 M3 Competition 331kW/450hpBMW F80 M3 CS 338kW/460hpBMW F82/F83 M4 317kW/431hpBMW F82/F83 M4 Competition 331kW/450hpBMW F82 M4 CS 338kW/460hpBMW F82 M4 GTS 368kW/500hp The Wagner tuning Ø57mm charge pipe kit for the S55 engine. Discover the new Performance Ø57mm Charge Pipe Kit from Wagner Tuning for your S55 engine. Designed to maximize the performance of your vehicle while improving durability, this kit offers a range of advanced features that will give your vehicle a real performance boost. Features:Optimized fluid dynamics:Compared to the OEM Charge Pipes, Wagner Tuning Charge Pipes offer a larger flow diameter and minimize internal cross-sectional changes, resulting in 40% less backpressure. This relieves the turbochargers and improves the response behavior.Robust construction:The charge pipes are made entirely of aluminum and withstand high pressures as well as aging. Unlike OEM products, they do not burst under load.Special powder coating:The Charge Pipes are coated with a special textured powder coating that not only improves corrosion protection, but also ensures an OEM look. Advantages:Maximized performance:The Performance Charge Pipe Kit improves flow dynamics and reduces back pressure, resulting in increased engine performance and responsiveness.Durability:Thanks to the robust aluminum construction and high-quality powder coating, Charge Pipes offer long-term durability and reliability.Easy installation:The kit is easy to install and requires no complex modifications. With the included mounting hardware, installation is a breeze. Scope of delivery:2 aluminum charge air pipes (black coated)2 silicone adapters (black)4 stainless steel hose clamps1 mounting material1 parts certificate With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

Facts: Material: Carbon Manufacturer: Eventuri Parts certificate: without Eventuri carbon fibre charge pipes for S55 F8X models Full carbon S55 Chargepipes by Eventuri. Perfect thermal insulation and built for high pressures thanks to one of the most durable and robust materials on the tuning market. The full carbon fibre charge pipes for S55 engines (F-Series) are not only visually stunning, but also a real technical innovation. Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction BMW 2 Series Coupe (F87)M2 Competition302kW / 411hp2979cm³S55 B30 A06.18 - 06.21 BMW 3 Series (F80)M3317kW / 431hp2979cm³S55 B30 A03.14 - 10.18 BMW 3 Series (F80)M3 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 10.18 BMW 3 Series (F80)M3 CS338kW / 460hp2979cm³S55 B30 A01.18 - 10.18 BMW 4 Series (F82/F83)M4317kW / 431hp2979cm³S55 B30 A03.14 - 07.20 BMW 4 Series (F82/F83)M4 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 07.20 BMW 4 Series Coupe (F82)M4 CS338kW / 460hp2979cm³S55 B30 A07.17 - 06.19 BMW 4 Series Coupe (F82)M4 GTS368kW / 500hp2979cm³S55 B30 A03.16 - 06.19

Facts: - Charge- & Boostpipe aluminium black - incl. mounting rubbers, clamps Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 3 Series (F80)M3317kW / 431hp2979cm³S55 B30 A03.14 - 10.18 BMW 3 Series (F80)M3 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 10.18 BMW 3 Series (F80)M3 CS338kW / 460hp2979cm³S55 B30 A01.18 - 10.18 BMW 4 Series (F82/F83)M4317kW / 431hp2979cm³S55 B30 A03.14 - 07.20 BMW 4 Series (F82/F83)M4 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 07.20 BMW 4 Series Coupe (F82)M4 CS338kW / 460hp2979cm³S55 B30 A07.17 - 06.19

Includes the following services:- Removing and replacing the connecting rod bearings- Check and measure crankshaft journals- Check and adjust the oil pump- Clean all parts- Wheel alignment- Oil & filter change- incl. all parts such as bearings, screws, seals, oil filter and engine oil (10W60)- Entry in the service booklet with BMW serial number stamp- 1 liter oil refillIn addition, and depending on requirements, we can also replace the spark plugs and engine mounts for an additional charge. Please note:This service can only be carried out at our company headquarters!

Scope of delivery: - Aulitzky tuning crankshaft lock incl. 8 original fastening screws - Fitting instructions Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 2er Coupe (F87)M2 Competition302kW / 411hp2979cm³S55 B30 A06.18 - 06.21 BMW 3er (F80)M3317kW / 431hp2979cm³S55 B30 A03.14 - 10.18 BMW 3er (F80)M3 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 10.18 BMW 4er (F82/F83)M4317kW / 431hp2979cm³S55 B30 A03.14 - 07.20 BMW 4er (F82/F83)M4 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 07.20

Your vehicle is missing a data display! We have it - the CANchecked display for the F-series (F21, F22, F23, F30, F31, F32, F33, F80, F82, F83 and F87. Access to all data from the engine:The sensors are queried directly via Can Bus and are displayed on our tried-and-tested MFD28. The display for the E-series comes with a vehicle-specific cover and fits into the interior like an original part. This means that the ventilation through the slots remains intact. Our display emulates a manufacturer tester so that all detailed values are available. We have optimized the protocol to achieve maximum polling speed. Details:- integrates perfectly into the vehicle interior- Up to 128 sensors can be queried- 10 individually configurable views with our DSS - Display Setup Software- ready-made views for a quick start with our display- simply plug and play via our cable set - plug in, done- 4 additional analog inputs for exhaust gas temperature, oil pressure and more- Best readability - optional anti-reflective film included- Query the sensors like manufacturer diagnostic tools Performance meter:Measure your acceleration times in our performance widget - 0-100, 100-200, 0-200 Data jogging:Log all data to the internal SD card. Whether “on-demand” (start at the tap of a finger) or permanently. All data from your last turn is saved. Preset alarms:Preset alerts can be easily activated and customized. For example, receive a large warning message if the exhaust gas temperature is above 900 degrees. 4 additional analog inputs:Additional temperature and/or pressure sensors can be connected for further monitoring options. e.g. exhaust gas temperature or exhaust gas back pressure. An ethanol sensor can be connected to one of the digital inputs. Read out/delete errors:Read out errors from the engine control unit in plain text and also delete them Individual designWhether it's the individual start screen or the selection from a variety of different widgets. Make the display your display! Switch pages with the cruise control button:To make driving safer, we have integrated the cruise control switch here with the company Lightweight-Performance. When cruise control is not active, you can use the up/down button to switch the views in the display. This has the following advantages:- No “searching” for the display while concentrating on the road ahead- Switching even when wearing gloves (on trackdays)- Quick and safe checking of overview pages and then returning to the main viewDriver Dynamics:We have developed a special view for all track drivers who want to further improve their driving style and become a second or two faster:- G-forces (lateral and longitudinal acceleration)- Vehicle speed- Steering angle- accelerator pedal position- Brake pressure This sensor system gives the driver the opportunity to aim for even higher speeds in bends and to hit the braking point even later. Together with the data log in the internal memory, which can be downloaded from the display after a track day, this offers a great opportunity to synchronize the data with a video. Access to all data from the engine control unit:We supply your display with a ready-made TRI file as standard. All sensors that are queried are defined here. Temperatures:Engine water temperature, oil temperature, intake temperature, exhaust temperature, transmission temperature Pressures:Boost pressure, boost pressure target, fuel pressure high pressure pump, exhaust back pressure, low pressure, front brake pressure, rear brake pressure, oil pressure Lambda/mixture:Lambda value target/actual, injection correction, long-term lambda adjustment, total ignition angle, ignition angle per cylinder Other data:RPM, air mass (g/s), vehicle speed, throttle angle, battery voltage, gear, accelerator pedal position, longitudinal and lateral acceleration, steering angle, yaw angle, torque, power, boost pressure control valve activation If values are missing, they can easily be added. It always depends on the engine whether it supports the values, sometimes not all sensors are available. Attention: Not all values are available for all engines! For which engines and models is the display for F-series:The display fits the following vehicles:- 1 Series: F20, F21- 2 Series: F22, F23- 3 Series: F30, F31- 4 Series: F32, F33- M models: F87, F80, F82, F83 (Convertible) We currently support the following engines, unlisted engines can be added on request:- B48- B58- N13- N47- N55- N57- S55 The respective version for RHD (right-hand drive) is also available. The data may vary between the different engines. Read out and delete errors:Swipe down to access the “DTC” (Diagnostic Trouble Codes = fault memory). The display reads the fault memory from the engine. Optionally, you can also delete these directly on the display. Errors for the engine are displayed in plain text so that you can decide for yourself whether you can continue driving. MFD28 Technical data:- Dimensions: 70.3 x 52mm - Hardware: 2.8” TFT screen, touchscreen, MicroSD, MicroUSB- High-quality milled aluminum front frame- Symmetrical display - ideal for rotating it by 90- Views completely freely configurable on the PC with our DSS - Display Setup Software- Up to 64 widgets per display- 64 sensors (Can Bus + internal)- 10 views- 4x analog inputs- Optional external switching flash- Can bus switching- Can Bus protocols: UDS, KWP2000, OBD Supported values:Many customers always ask: “Which values can I query from my control unit”. The answer: “ALL”. Our MFD28 is compatible with ISO 11898-2 and SAE J2284.The control unit manufacturers themselves determine which values are sent via the CAN bus interface. The documentation is important here - possibly even in the form of a DBC file that can be imported directly. You can also access our extensive list of already implemented control units. This can be found in the download area. A total of up to 50 sensors can be queried if the manufacturer supports this.Broadcast data as well as OBD2 queries via Can Bus (11bit/29bit) are implemented. Special protocols such as TP2.0 from VW/Audi and UDS are also available. DSS - Display Setup Software:With our DSS - Display Setup Software, the display can be conveniently configured on the PC. The Can Bus protocol can be customized, you can import DBC files and design the displays with your own widgets.The log viewer downloads log files from the display. These can then be viewed and values can be individually selected and scaled.A built-in Can Bus logger makes it possible to take a close look at the log. This can be used to reverse-engineer unknown Can Buses.

ATTENTION: THIS DIFFUSER ONLY FITS MODELS UP TO THE FACELIFT AT THE BEGINNING OF 2017! The Vorsteiner carbon diffuser for the F80 and F82 ideally rounds off the rear of the vehicle. The combination of extreme sportiness and pure elegance from Vorsteiner leaves no questions unanswered. In addition to the visual factor, this full carbon rear apron also impresses in terms of lightweight construction, downforce on the rear axle and therefore the aerodynamics of the entire vehicle. In addition, the diffuser has a 4-step clear lacquer coating to protect it from UV rays. Expert opinion: Material certificate Compatible vehicles:BMW 3 (F30, F80) M3 CS 2018-2018BMW 3 (F30, F80) M3 Competition 2016-2018BMW 4 Convertible (F33, F83) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 2014-2020BMW 4 Coupe (F32, F82) M4 CS 2017-2019BMW 4 Coupe (F32, F82) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 GTS 2016-2019

The 3DDesign carbon diffuser is made entirely of carbon fibre and fits both the F80 and the F82. The rear apron combines the elements of sportiness and elegance. In combination with the integrated side trim strips, the fins give the rear of the vehicle a fresh carbon fibre look. In addition, the downforce on the rear axle is increased, thus improving the aerodynamics of the vehicle. A type 2 diffuser from 3DDesign without the side mouldings is also available. Incl. parts certificate Compatible vehicles:BMW 4 Convertible (F33, F83) M4 2014-2020BMW 4 Convertible (F33, F83) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 2014-2020BMW 4 Coupe (F32, F82) M4 CS 2017-2019BMW 4 Coupe (F32, F82) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 GTS 2016-2019

The 3DDesign carbon diffuser type 2 is made entirely of carbon fibre and gives the rear of the F80 or F82 an individual look in no time at all. The combination of sportiness and elegance is particularly impressive across the board. In addition, the downforce on the rear axle is slightly increased, which has a positive effect on the aerodynamics of the vehicle. A Type 1 diffuser from 3DDesign is also available, which differs in that it has an additional fin on the side. Compatible vehicles:BMW 4 Convertible (F33, F83) M4 2014-2020BMW 4 Convertible (F33, F83) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 2014-2020BMW 4 Coupe (F32, F82) M4 CS 2017-2019BMW 4 Coupe (F32, F82) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 GTS 2016-2019

CSF Race F8X - DKG Transmission Oil Cooler Manufactured with CSF's AC condenser technology using a 1-row super high pressure 26mm multi-channel microtube. Dual-pass high performance core with 10 cooling tubes, compared to the OEM single-pass with 6-tube design for the return line. High-density multi-fin fin design.“Drop-in fit” requires no adjustments during installationAll OEM components are reused, including oil line connections, mounting brackets and shroudLab tested to be ~30% more efficient than the OEM coolerThe world's first and only “plug-and-play” improved DCT transmission cooler for the BMW S55 engine in the BMW F8x M3 M4 Compatible vehicles:BMW 3 (F30, F80) M3 2014-2018BMW 3 (F30, F80) M3 CS 2018-2018BMW 3 (F30, F80) M3 Competition 2016-2018BMW 4 Convertible (F33, F83) M4 2014-2020BMW 4 Convertible (F33, F83) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 2014-2020BMW 4 Coupe (F32, F82) M4 CS 2017-2019BMW 4 Coupe (F32, F82) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 GTS 2016-2019

Facts: Material: Carbon Manufacturer: Eventuri The Eventuri carbon engine cover for the F8x models ensures extreme sportiness and above all individuality under the bonnet, especially in combination with the Eventuri intake, which is also available in carbon or Kevlar! Suitable for the BMW S55 engine. Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction BMW 3 Series (F80)M3317kW / 431hp2979cm³S55 B30 A03.14 - 10.18 BMW 3 Series (F80)M3 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 10.18 BMW 3 Series (F80)M3 CS338kW / 460hp2979cm³S55 B30 A01.18 - 10.18 BMW 4 Series (F82/F83)M4317kW / 431hp2979cm³S55 B30 A03.14 - 07.20 BMW 4 Series (F82/F83)M4 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 07.20 BMW 4 Series Coupe (F82)M4 CS338kW / 460hp2979cm³S55 B30 A07.17 - 06.19 BMW 4 Series Coupe (F82)M4 GTS368kW / 500hp2979cm³S55 B30 A03.16 - 06.19

Designed and engineered with the OEM standard as the frame, these AutoTecknic dry carbon fibre wing trims are made with 100% dry carbon fibre composite material and fused with abs tabs that result in strong tabs throughout the durable construction for a secure and seamless fit. As an AutoTecknic standard, each trim piece is individually manufactured with precision, resulting in superior paint quality to accentuate any vehicle. The name of dry carbon fibre comes from its manufacturing process. Dry carbon fibre is formed by using a "pre-impregnated" or impregnated piece of carbon material. This piece of carbon is first placed in a mould and then placed in a sealed autoclave to cure properly. This method produces the least amount of waste and forms a lighter version of the carbon than the "wet" method. The autoclave vacuuming process in the production of dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest quality version of carbon fibre products produced. Package includes one pair (passenger and driver side) as a direct OEM replacement for wing liners. Note: The emblems shown in the photos are for demonstration purposes only. The emblems are not included in the package. Original emblems can be reused, or new emblems could be purchased through other suppliers. Compatible vehicles:BMW 3 (F30, F80) M3 2014-2018BMW 3 (F30, F80) M3 CS 2018-2018BMW 3 (F30, F80) M3 Competition 2016-2018BMW 4 Convertible (F33, F83) M4 2014-2020BMW 4 Convertible (F33, F83) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 2014-2020BMW 4 Coupe (F32, F82) M4 CS 2017-2019BMW 4 Coupe (F32, F82) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 GTS 2016-2019