Rear wing Carbon | fits Lamborghini Aventador | Vorsteiner

The Vorsteiner carbon front lip for Lamborghini Aventador Zaragoza Edizione provides more downforce on the front axle. Made from autoclaved prepreg carbon.Expert opinion: Material certificate Compatible vehicles:LAMBORGHINI AVENTADOR Coupe 6.5 LP 700-4 AWD Since 2011LAMBORGHINI AVENTADOR Roadster 6.5 LP 700-4 AWD Since 2013LAMBORGHINI AVENTADOR Roadster 6.5 LP 700-4 SV AWD Since 2016

The Vorsteiner carbon rear wing for Lamborghini Aventador Zaragoza Edizione provides more downforce on the rear axle. Made from autoclaved prepreg carbon fibre.Expertise: Material certificate Compatible vehicles:LAMBORGHINI AVENTADOR Coupe 6.5 LP 700-4 AWD Since 2011LAMBORGHINI AVENTADOR Roadster 6.5 LP 700-4 AWD Since 2013LAMBORGHINI AVENTADOR Roadster 6.5 LP 700-4 SV AWD Since 2016

Made from prepreg carbon fibre, these Performance side skirts emphasise the character of your vehicle and make it stand out both on the road and on the internet. Why do we use pre-preg carbon fibre?Unlike normal carbon fibre, pre-preg carbon is reinforced to increase strength and durability.It can also be a staggering 70% lighter than other carbon fibre options, ideal for weight saving.In terms of quality, pre-preg carbon is far more consistent, meaning that the likelihood of imperfections is drastically reduced.of imperfections is drastically reduced.The manufacturing process eliminates unwanted air bubbles and results in a perfect, smooth, sleekand high-gloss finish that is the ultimate piece to complement your vehicle. When you buy Pre-Preg, you are investing in a higher quality, more durable part that will outlast other forms ofoutlast other forms of carbon fibre and potentially save you money in the long run. Details:- 100% pure prepreg carbon fibre construction- OEM style weave- High-gloss finish- with parts certificate according to §19.3 Scope of delivery:1x set of Performance side skirts Compatible vehicles:- BMW G82 M4 Coupe (2021+)- BMW G82 M4 Competition Coupe (2021+)- BMW G83 M4 Competition Cabrio (2021+)Note: This is NOT an original BMW product!

The EVO 1 Competition intercooler kit is suitable for the:Audi RS3 8V Sportback/Sedan 294KW/400hp 07/2021+ Discover the true potential of your vehicle with the revolutionary Competition high-performance intercooler. This innovative upgrade catapults your performance to a whole new level and gives you an unparalleled driving experience. With impressive mesh dimensions of 660mm x 180mm x 110mm and a flow area 14% larger than the original, the Competition High Performance Intercooler offers a staggering 57% increase in charge air volume. The high-quality Tube Fin mesh with internal turbulators ensures optimum cooling and maximum performance. Despite its size, the intercooler is surprisingly light, weighing just 8.3 kg. The cast aluminium end boxes have been optimized using advanced flow analysis in the CFD system and ensure excellent cooling properties with minimal back pressure. In addition, the intercooler is equipped with an anti-corrosion coating with excellent heat conduction properties. This enables permanent and optimum cooling with a significant increase in performance. The Competition high-performance intercooler kit is supplied completely ready for installation and can be effortlessly replaced with the standard intercooler - a real plug-and-play experience. With a pressure resistance of up to 6 bar, the intercooler has been extensively tested and demonstrates its outstanding stability under extreme conditions. Like all our products, this intercooler is subject to strict quality control in order to meet the highest standards. It goes without saying that it is also ideally suited for racing. Prepare to unleash the full potential of your vehicle and achieve a noticeable increase in performance. Choose the competition high-performance intercooler and experience a whole new dimension of performance and driving pleasure. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 14% larger inflow area- 57% larger charge air volume- Optimized flow behavior- Less back pressure- Plug & Play Dimensions original intercooler:640mm x 163mm x 80mmV=8.3 litersA=1043 cm² Wagner Tuning intercooler dimensions:660mm x 180mm x 110mmV=13.07 litersA=1188 cm² Scope of delivery:1 intercooler (black coated)1 air duct1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.

KW coilover springs The spring set with stepless lowering KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active. Setup - sporty and harmonious spring rates The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range. Stepless lowering Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles. Please note the conditions and instructions for this product: - VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers) Technical information: Lowering VA/HA (mm): 10-40/15-45 Adjustment HA: Thread Approval: Parts certificate (§19.3) Scope of delivery: Set (VA+HA) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A6 (4F) 4F2, C6 04/2004-08/2011 RS6 quattro notchback Petrol 426 KW 4991 ccm 10 All-wheel drive AUDI A6 Avant (4F) 4F5, C6 11/2004-08/2011 RS6 quattro estate Petrol 426 KW 4991 ccm 10 All-wheel drive

ST sport springs With over 1,000 applications, the wide range of springs from ST suspensions is one of the few lowering springs on the market that improve the handling of a vehicle in combination with the standard suspension. In addition to an appealing lowering effect, the ST suspensions sports springs enable an increase in cornering speed and dynamic driving. Great looks for every carThe ST suspensions sports springs are manufactured in OEM quality from chrome-silicon steel using a cold-forming process, are multi-tempered and have a final epoxy coating. This enables them to withstand a wide range of weather conditions. Depending on the vehicle model, ST suspensions sports springs can be used to achieve a subtle lowering of 20 mm at the front and 15 mm on the drive axle on the current BMW M3 (E9x series), an appealing 30 mm on both axles on the Audi A1 or up to 60 mm on the VW Golf I, for example. The installation of ST suspensions sports springs not only lowers the body's center of gravity compared to the standard suspension, but also benefits the driving dynamics. During strong steering movements, such as evasive maneuvers and fast cornering, the lower body roll reduces body movements. Furthermore, compression and rebound are reduced, making the handling more agile. The ideal spring rate for every loweringThe spring rates of the ST suspensions sports springs harmonize perfectly with the set-up of the standard dampers. In conjunction with the respective vehicle weight, the wheel loads and the level of the intended lowering, the ST suspensions sports springs have a major influence on the compression and rebound behavior of the standard suspension. The ST suspensions sports springs made of chrome-silicon steel not only support the vehicle weight, but also guarantee a more direct driving experience thanks to the specially tuned spring rates. Depending on the level of lowering, for example with a reduction in the center of gravity of 20 mm, 30 mm or 40 mm, the ST suspensions sports springs have different spring rates that harmonize with the standard dampers. The higher the lowering level, the higher the spring rate Great variety, not just for tuning enthusiastsThe sports springs from ST suspensions are not only available for current vehicles and new cars such as the Audi A7 Sportback or Mercedes-Benz E-Class and others.Lovers of timeless models such as the BMW E30 or VW Golf I will also find the ideal sports springs in the ST suspensions product range. The tested ST suspensions sports springs are even available for unusual vehicles. The range of sports springs currently includes around 1,000 applications for 30 different car brands from Alfa Romeo to Volvo. Please note the conditions and instructions for this product:- For vehicles with factory lowering, the specified lowering rate is reduced by the amount of factory lowering Technical information:Lowering VA/HA (mm): 20/20Approval: Parts certificate (§19.3)Scope of delivery: Set VA+HA (4 pcs.)Year of construction: 09/2017-Axle load VA/HA (kg): -1000/-850 Compatible vehicles:Manufacturer Model Version Body Fuel Performance Displacement Cylinder DriveVW POLO VI (AW, AW1, BZ1) 06/2017- 2.0 GTI Hatchback Petrol 147 KW 1984 ccm 4 Front-wheel driveVW POLO VI (AW, AW1, BZ1) 06/2017- GTI Hatchback Petrol 152 KW 1984 ccm 4 Front-wheel drive